From 57e4b8d6641a4cba327e5da55b3df06ef9060f2c Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Thu, 20 Jun 2019 12:00:41 +0200 Subject: routing: pbr: add example utilizing multiple ISP uplinks --- docs/routing.rst | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 63 insertions(+), 2 deletions(-) (limited to 'docs/routing.rst') diff --git a/docs/routing.rst b/docs/routing.rst index abee716a..217847d6 100644 --- a/docs/routing.rst +++ b/docs/routing.rst @@ -300,13 +300,16 @@ display arp table entries 10.1.1.100 ether 08:00:27:de:23:aa CM eth1 -Policy Routing -============== +Policy-Based Routing (PBR) +-------------------------- VyOS supports Policy Routing, allowing traffic to be assigned to a different routing table. Traffic can be matched using standard 5-tuple matching (source address, destination address, protocol, source port, destination port). +Transparent Proxy +^^^^^^^^^^^^^^^^^ + The following example will show how VyOS can be used to redirect web traffic to an external transparent proxy: @@ -336,6 +339,64 @@ we use: set interfaces ethernet eth1 policy route FILTER-WEB + +Multiple Uplinks +^^^^^^^^^^^^^^^^ + +VyOS Policy-Based Routing (PBR) works by matching source IP address ranges and +forwarding the traffic using different routing tables. + +Routing tables that will be used in this example are: + +* ``table 10`` Routing tabled used for VLAN 10 (192.168.188.0/24) +* ``table 11`` Routing tabled used for VLAN 11 (192.168.189.0/24) +* ``main`` Routing table used by VyOS and other interfaces not paritipating in PBR + +.. figure:: _static/images/pbr_example_1.png + :scale: 80 % + :alt: PBR multiple uplinks + + Policy-Based Routing with multiple ISP uplinks (source ./draw.io/pbr_example_1.drawio) + +Add default routes for routing ``table 10`` and ``table 11`` + +.. code-block:: sh + + set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.1.1 + set protocols static table 11 route 0.0.0.0/0 next-hop 192.0.2.2 + +Add policy route matching VLAN source addresses + +.. code-block:: sh + + set policy route PBR rule 20 set table '10' + set policy route PBR rule 20 description 'Route VLAN10 traffic to table 10' + set policy route PBR rule 20 source address '192.168.188.0/24' + + set policy route PBR rule 20 set table '11' + set policy route PBR rule 20 description 'Route VLAN11 traffic to table 11' + set policy route PBR rule 20 source address '192.168.189.0/24' + +Apply routing policy to **inbound** direction of out VLAN interfaces + +.. code-block:: sh + + set interfaces ethernet eth0 vif 10 policy route 'PBR' + set interfaces ethernet eth0 vif 11 policy route 'PBR' + + +**OPTIONAL:** Exclude Inter-VLAN traffic (between VLAN10 and VLAN11) from PBR + +.. code-block:: sh + + set policy route PBR rule 10 description 'VLAN10 <-> VLAN11 shortcut' + set policy route PBR rule 10 destination address '192.168.188.0/24' + set policy route PBR rule 10 destination address '192.168.189.0/24' + set policy route PBR rule 10 set table 'main' + +.. note:: Allows the VLAN10 and VLAN20 hosts to communicate with each other using the + main routing table. + MSS Clamping ============ -- cgit v1.2.3