From 8943fc9f877cbee3301a8261ddd27b4b1f15f174 Mon Sep 17 00:00:00 2001 From: rebortg Date: Mon, 30 Nov 2020 20:53:36 +0100 Subject: arrange services and protocols --- docs/routing/static.rst | 134 ------------------------------------------------ 1 file changed, 134 deletions(-) delete mode 100644 docs/routing/static.rst (limited to 'docs/routing/static.rst') diff --git a/docs/routing/static.rst b/docs/routing/static.rst deleted file mode 100644 index 523627fa..00000000 --- a/docs/routing/static.rst +++ /dev/null @@ -1,134 +0,0 @@ -.. _static-routing: - -###### -Static -###### - -Static routes are manually configured routes, which, in general, cannot be -updated dynamically from information VyOS learns about the network topology from -other routing protocols. However, if a link fails, the router will remove -routes, including static routes, from the :abbr:`RIPB (Routing Information -Base)` that used this interface to reach the next hop. In general, static -routes should only be used for very simple network topologies, or to override -the behavior of a dynamic routing protocol for a small number of routes. The -collection of all routes the router has learned from its configuration or from -its dynamic routing protocols is stored in the RIB. Unicast routes are directly -used to determine the forwarding table used for unicast packet forwarding. - -Static Routes -############# - -.. cfgcmd:: set protocols static route next-hop
- - Configure next-hop `
` for an IPv4 static route. Multiple static - routes can be created. - -.. cfgcmd:: set protocols static route next-hop
disable - - Disable this IPv4 static route entry. - -.. cfgcmd:: set protocols static route next-hop
distance - - Defines next-hop distance for this route, routes with smaller administrative - distance are elected prior those with a higher distance. - - Range is 1 to 255, default is 1. - - .. note:: Routes with a distance of 255 are effectively disabled and not - installed into the kernel. - -.. cfgcmd:: set protocols static route6 next-hop
- - Configure next-hop `
` for an IPv6 static route. Multiple static - routes can be created. - -.. cfgcmd:: set protocols static route6 next-hop
disable - - Disable this IPv6 static route entry. - -.. cfgcmd:: set protocols static route6 next-hop
distance - - Defines next-hop distance for this route, routes with smaller administrative - distance are elected prior those with a higher distance. - - Range is 1 to 255, default is 1. - - .. note:: Routes with a distance of 255 are effectively disabled and not - installed into the kernel. - - -Interface Routes -================ - -.. cfgcmd:: set protocols static interface-route next-hop-interface - - Allows you to configure the next-hop interface for an interface-based IPv4 - static route. `` will be the next-hop interface where trafic is - routed for the given ``. - -.. cfgcmd:: set protocols static interface-route next-hop-interface disable - - Disables interface-based IPv4 static route. - -.. cfgcmd:: set protocols static interface-route next-hop-interface distance - - Defines next-hop distance for this route, routes with smaller administrative - distance are elected prior those with a higher distance. - - Range is 1 to 255, default is 1. - -.. cfgcmd:: set protocols static interface-route6 next-hop-interface - - Allows you to configure the next-hop interface for an interface-based IPv6 - static route. `` will be the next-hop interface where trafic is - routed for the given ``. - -.. cfgcmd:: set protocols static interface-route6 next-hop-interface disable - - Disables interface-based IPv6 static route. - -.. cfgcmd:: set protocols static interface-route6 next-hop-interface distance - - Defines next-hop distance for this route, routes with smaller administrative - distance are elected prior those with a higher distance. - - Range is 1 to 255, default is 1. - - -Blackhole -========= - -.. cfgcmd:: set protocols static route blackhole - - Use this command to configure a "black-hole" route on the router. A - black-hole route is a route for which the system silently discard packets - that are matched. This prevents networks leaking out public interfaces, but - it does not prevent them from being used as a more specific route inside your - network. - -.. cfgcmd:: set protocols static route blackhole distance - - Defines blackhole distance for this route, routes with smaller administrative - distance are elected prior those with a higher distance. - -.. cfgcmd:: set protocols static route6 blackhole - - Use this command to configure a "black-hole" route on the router. A - black-hole route is a route for which the system silently discard packets - that are matched. This prevents networks leaking out public interfaces, but - it does not prevent them from being used as a more specific route inside your - network. - -.. cfgcmd:: set protocols static route6 blackhole distance - - Defines blackhole distance for this route, routes with smaller administrative - distance are elected prior those with a higher distance. - - -Alternate Routing Tables -======================== - -TBD - -Alternate routing tables are used with policy based routing of by utilizing -:ref:`vrf`. -- cgit v1.2.3