From 706e234c65a2e7f4c3be9d9ed9d62925d646bd76 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Sun, 16 Jun 2019 00:28:26 +0200 Subject: Interfaces/VPN: move WireGuard to VPN section ... as OpenVPN is already there, too and it is represented as interface. --- docs/vpn/index.rst | 1 + docs/vpn/wireguard.rst | 120 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 121 insertions(+) create mode 100644 docs/vpn/wireguard.rst (limited to 'docs/vpn') diff --git a/docs/vpn/index.rst b/docs/vpn/index.rst index 96a73454..956711ad 100644 --- a/docs/vpn/index.rst +++ b/docs/vpn/index.rst @@ -15,3 +15,4 @@ This chapter descriptes the available VPN services provided by VyOS. site2site_ipsec dmvpn pptp + wireguard diff --git a/docs/vpn/wireguard.rst b/docs/vpn/wireguard.rst new file mode 100644 index 00000000..b0d438a5 --- /dev/null +++ b/docs/vpn/wireguard.rst @@ -0,0 +1,120 @@ +.. _wireguard: + +WireGuard VPN Interface +----------------------- + +WireGuard_ is an extremely simple yet fast and modern VPN that utilizes +state-of-the-art cryptography. See https://www.wireguard.com for more +information. + +Configuration +^^^^^^^^^^^^^ + +Generate the keypair, which creates a public and private part and stores it +within VyOS. + +.. code-block:: sh + + wg01:~$ configure + wg01# run generate wireguard keypair + +The public key is being shared with your peer(s), your peer will encrypt all +traffic to your system using this public key. + +.. code-block:: sh + + wg01# run show wireguard pubkey + u41jO3OF73Gq1WARMMFG7tOfk7+r8o8AzPxJ1FZRhzk= + +The next step is to configure your local side as well as the policy based +trusted destination addresses. If you only initiate a connection, the listen +port and endpoint is optional, if you however act as a server and endpoints +initiate the connections to your system, you need to define a port your clients +can connect to, otherwise it's randomly chosen and may make it difficult with +firewall rules, since the port may be a different one when you reboot your +system. + +You will also need the public key of your peer as well as the network(s) you +want to tunnel (allowed-ips) to configure a wireguard tunnel. The public key +below is always the public key from your peer, not your local one. + +**local side** + +.. code-block:: sh + + set interfaces wireguard wg01 address '10.1.0.1/24' + set interfaces wireguard wg01 description 'VPN-to-wg02' + set interfaces wireguard wg01 peer to-wg02 allowed-ips '10.2.0.0/24' + set interfaces wireguard wg01 peer to-wg02 endpoint '192.168.0.142:12345' + set interfaces wireguard wg01 peer to-wg02 pubkey 'XMrlPykaxhdAAiSjhtPlvi30NVkvLQliQuKP7AI7CyI=' + set interfaces wireguard wg01 port '12345' + set protocols static interface-route 10.2.0.0/24 next-hop-interface wg01 + +The last step is to define an interface route for 10.2.0.0/24 to get through +the wireguard interface `wg01`. Multiple IPs or networks can be defined and +routed, the last check is allowed-ips which either prevents or allows the +traffic. + +**remote side** + +.. code-block:: sh + + set interfaces wireguard wg01 address '10.2.0.1/24' + set interfaces wireguard wg01 description 'VPN-to-wg01' + set interfaces wireguard wg01 peer to-wg02 allowed-ips '10.1.0.0/24' + set interfaces wireguard wg01 peer to-wg02 endpoint '192.168.0.124:12345' + set interfaces wireguard wg01 peer to-wg02 pubkey 'u41jO3OF73Gq1WARMMFG7tOfk7+r8o8AzPxJ1FZRhzk=' + set interfaces wireguard wg01 port '12345' + set protocols static interface-route 10.1.0.0/24 next-hop-interface wg01 + +Assure that your firewall rules allow the traffic, in which case you have a +working VPN using wireguard. + +.. code-block:: sh + + wg01# ping 10.2.0.1 + PING 10.2.0.1 (10.2.0.1) 56(84) bytes of data. + 64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=1.16 ms + 64 bytes from 10.2.0.1: icmp_seq=2 ttl=64 time=1.77 ms + + wg02# ping 10.1.0.1 + PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data. + 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=4.40 ms + 64 bytes from 10.1.0.1: icmp_seq=2 ttl=64 time=1.02 ms + +An additional layer of symmetric-key crypto can be used on top of the +asymmetric crypto, which is optional. + +.. code-block:: sh + + wg01# run generate wireguard preshared-key + rvVDOoc2IYEnV+k5p7TNAmHBMEGTHbPU8Qqg8c/sUqc= + +Copy the key, it is not stored on the local file system. Make sure you +distribute that key in a safe manner, it's a symmatric key, so only you and +your peer should have knowledge if its content. + +.. code-block:: sh + + wg01# set interfaces wireguard wg01 peer to-wg02 preshared-key 'rvVDOoc2IYEnV+k5p7TNAmHBMEGTHbPU8Qqg8c/sUqc=' + wg02# set interfaces wireguard wg01 peer to-wg01 preshared-key 'rvVDOoc2IYEnV+k5p7TNAmHBMEGTHbPU8Qqg8c/sUqc=' + +**operational commands** + +.. code-block:: sh + + vyos@wg01# show interfaces wireguard wg01 + + interface: wg01 + public key: xHvgSJC8RTClfvjc0oX6OALxU6GGLapjthjw7x82CSw= + private key: (hidden) + listening port: 12345 + + peer: 9Ek3R30mG6Vk+GHsENtPF0b9Ul+ftxx4dDBa1bdBxX8= + endpoint: 192.168.0.142:12345 + allowed ips: 10.2.0.0/24 + latest handshake: 4 minutes, 22 seconds ago + transfer: 860 B received, 948 B sent + + +.. _WireGuard: https://www.wireguard.com -- cgit v1.2.3