From a71cdcec33caaeb9e9667d66e8248de1a47122a8 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Thu, 28 Nov 2019 21:26:03 +0100 Subject: docs: remove all trailing whitespaces Done via: $ find . -name "*.rst" | xargs sed -i 's/[ \t]*$//' --- docs/vpn/dmvpn.rst | 2 +- docs/vpn/wireguard.rst | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'docs/vpn') diff --git a/docs/vpn/dmvpn.rst b/docs/vpn/dmvpn.rst index 3715e5de..5794100b 100644 --- a/docs/vpn/dmvpn.rst +++ b/docs/vpn/dmvpn.rst @@ -160,7 +160,7 @@ HUB Example Configuration: set protocols static route 0.0.0.0/0 next-hop 1.1.1.2 set protocols static route 192.168.2.0/24 next-hop 10.0.0.2 set protocols static route 192.168.3.0/24 next-hop 10.0.0.3 - + HUB on AWS Configuration Specifics ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/docs/vpn/wireguard.rst b/docs/vpn/wireguard.rst index 2ccf7b57..76f1f6ee 100644 --- a/docs/vpn/wireguard.rst +++ b/docs/vpn/wireguard.rst @@ -42,7 +42,7 @@ Named keypairs can be used on a interface basis, if configured. If multiple wireguard interfaces are being configured, each can have their own keypairs. -The commands below will generate 2 keypairs, which are not related +The commands below will generate 2 keypairs, which are not related to each other. .. code-block:: console @@ -170,7 +170,7 @@ In the following example, the IPs for the remote clients are defined in the peer port 2224 } -The following is the config for the iPhone peer above. It's important to note that the ``AllowedIPs`` setting +The following is the config for the iPhone peer above. It's important to note that the ``AllowedIPs`` setting directs all IPv4 and IPv6 traffic through the connection. .. code-block:: console -- cgit v1.2.3