From 5182b55e2d03b047aa823824a0254a24bb3d2061 Mon Sep 17 00:00:00 2001 From: Nataliia Solomko Date: Wed, 4 Sep 2024 15:57:22 +0300 Subject: openfabric: T6652: OpenFabric protocol documentation https://docs.frrouting.org/en/latest/fabricd.html#openfabric --- docs/configuration/protocols/openfabric.rst | 239 ++++++++++++++++++++++++++++ 1 file changed, 239 insertions(+) create mode 100644 docs/configuration/protocols/openfabric.rst (limited to 'docs') diff --git a/docs/configuration/protocols/openfabric.rst b/docs/configuration/protocols/openfabric.rst new file mode 100644 index 00000000..f7126544 --- /dev/null +++ b/docs/configuration/protocols/openfabric.rst @@ -0,0 +1,239 @@ +.. _openfabric: + +##### +OpenFabric +##### + +OpenFabric, specified in `draft-white-openfabric-06.txt +`_, is +a routing protocol derived from IS-IS, providing link-state routing with +efficient flooding for topologies like spine-leaf networks. + +OpenFabric a dual stack protocol. +A single OpenFabric instance is able to perform routing for both IPv4 and IPv6. + +******* +General +******* + +Configuration +============= + +Mandatory Settings +------------------ + +For OpenFabric to operate correctly, one must do the equivalent of a Router ID +in Connectionless Network Service (CLNS). This Router ID is called the +:abbr:`NET (Network Entity Title)`. The system identifier must be unique within +the network + +.. cfgcmd:: set protocols openfabric net + + This command sets network entity title (NET) provided in ISO format. + + Here is an example :abbr:`NET (Network Entity Title)` value: + + .. code-block:: none + + 49.0001.1921.6800.1002.00 + + The CLNS address consists of the following parts: + + * :abbr:`AFI (Address family authority identifier)` - ``49`` The AFI value + 49 is what OpenFabric uses for private addressing. + + * Area identifier: ``0001`` OpenFabric area number (numerical area ``1``) + + * System identifier: ``1921.6800.1002`` - for system identifiers we recommend + to use IP address or MAC address of the router itself. The way to construct + this is to keep all of the zeroes of the router IP address, and then change + the periods from being every three numbers to every four numbers. The + address that is listed here is ``192.168.1.2``, which if expanded will turn + into ``192.168.001.002``. Then all one has to do is move the dots to have + four numbers instead of three. This gives us ``1921.6800.1002``. + + * :abbr:`NET (Network Entity Title)` selector: ``00`` Must always be 00. This + setting indicates "this system" or "local system." + +.. cfgcmd:: set protocols openfabric domain interface + address-family + + This command enables OpenFabric instance with on this interface, and + allows for adjacency to occur for address family (IPv4 or IPv6 or both). + +OpenFabric Global Configuration +-------------------------- + +.. cfgcmd:: set protocols openfabric domain-password + + + This command configures the authentication password for a routing domain, + as clear text or md5 one. + +.. cfgcmd:: set protocols openfabric domain purge-originator + + This command enables :rfc:`6232` purge originator identification. + +.. cfgcmd:: set protocols openfabric domain set-overload-bit + + This command sets overload bit to avoid any transit traffic through this + router. + +.. cfgcmd:: set protocols openfabric domain log-adjacency-changes + + Log changes in adjacency state. + +.. cfgcmd:: set protocols openfabric domain fabric-tier + + This command sets a static tier number to advertise as location + in the fabric. + + +Interface Configuration +----------------------- + +.. cfgcmd:: set protocols openfabric interface hello-interval + + + This command sets hello interval in seconds on a given interface. + The range is 1 to 600. Hello packets are used to establish and maintain + adjacency between OpenFabric neighbors. + +.. cfgcmd:: set protocols openfabric domain interface + hello-multiplier + + This command sets multiplier for hello holding time on a given + interface. The range is 2 to 100. + +.. cfgcmd:: set protocols openfabric domain interface + metric + + This command sets default metric for circuit. + The metric range is 1 to 16777215. + +.. cfgcmd:: set protocols openfabric interface passive + + This command enables the passive mode for this interface. + +.. cfgcmd:: set protocols openfabric domain interface + password plaintext-password + + This command sets the authentication password for the interface. + +.. cfgcmd:: set protocols openfabric domain interface + csnp-interval + + This command sets Complete Sequence Number Packets (CSNP) interval in seconds. + The interval range is 1 to 600. + +.. cfgcmd:: set protocols openfabric domain interface + psnp-interval + + This command sets Partial Sequence Number Packets (PSNP) interval in seconds. + The interval range is 1 to 120. + +Timers +------ + +.. cfgcmd:: set protocols openfabric domain lsp-gen-interval + + This command sets minimum interval at which link-state packets (LSPs) are + generated. The interval range is 1 to 120. + +.. cfgcmd:: set protocols openfabric domain lsp-refresh-interval + + This command sets LSP refresh interval in seconds. The interval range + is 1 to 65235. + +.. cfgcmd:: set protocols openfabric domain max-lsp-lifetime + + This command sets LSP maximum LSP lifetime in seconds. The interval range + is 360 to 65535. LSPs remain in a database for 1200 seconds by default. + If they are not refreshed by that time, they are deleted. You can change + the LSP refresh interval or the LSP lifetime. The LSP refresh interval + should be less than the LSP lifetime or else LSPs will time out before + they are refreshed. + +.. cfgcmd:: set protocols openfabric domain spf-interval + + This command sets minimum interval between consecutive shortest path first + (SPF) calculations in seconds.The interval range is 1 to 120. + + +******** +Examples +******** + +Enable OpenFabric +============ + +**Node 1:** + +.. code-block:: none + + set interfaces loopback lo address '192.168.255.255/32' + set interfaces ethernet eth1 address '192.0.2.1/24' + + set protocols openfabric domain VyOS interface eth1 address-family ipv4 + set protocols openfabric domain VyOS interface lo address-family ipv4 + set protocols openfabric net '49.0001.1921.6825.5255.00' + +**Node 2:** + +.. code-block:: none + + set interfaces loopback lo address '192.168.255.254/32' + set interfaces ethernet eth1 address '192.0.2.2/24' + + set protocols openfabric domain VyOS interface eth1 address-family ipv4 + set protocols openfabric domain VyOS interface lo address-family ipv4 + set protocols openfabric net '49.0001.1921.6825.5254.00' + + + +This gives us the following neighborships: + +.. code-block:: none + + Node-1@vyos:~$ show openfabric neighbor + show openfabric neighbor + Area VyOS: + System Id Interface L State Holdtime SNPA + vyos eth1 2 Up 27 2020.2020.2020 + + + Node-2@vyos:~$ show openfabric neighbor + show openfabric neighbor + Area VyOS: + System Id Interface L State Holdtime SNPA + vyos eth1 2 Up 30 2020.2020.2020 + + + +Here's the IP routes that are populated: + +.. code-block:: none + + Node-1@vyos:~$ show ip route openfabric + show ip route openfabric + Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + + f 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 + f>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 + + Node-2@vyos:~$ show ip route openfabric + show ip route openfabric + Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + + f 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 + f>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 -- cgit v1.2.3