From 921bd46616e2baaa1ced6a01af976c97937bf7a7 Mon Sep 17 00:00:00 2001 From: currite Date: Fri, 30 Aug 2019 23:58:57 +0200 Subject: show basic ospf config --- docs/routing/ospf.rst | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/docs/routing/ospf.rst b/docs/routing/ospf.rst index 23033bd6..b8366cdc 100644 --- a/docs/routing/ospf.rst +++ b/docs/routing/ospf.rst @@ -15,8 +15,21 @@ OSPF is a widely used IGP in large enterprise networks. OSPFv2 (IPv4) ^^^^^^^^^^^^^ -A typical configuration using 2 nodes, redistribute loopback address and the -node 1 sending the default route: +In order to have a VyOS system exchanging routes with OSPF neighbors, you will at least need to configure the area and a network, + +.. code-block:: sh + + set protocols ospf area 0 network 192.168.0.0/24 + +as well as the router ID. + +.. code-block:: sh + + set protocols ospf parameters router-id 10.1.1.1 + +That is the minimum configuration you will need. + +Below you can see a typical configuration using 2 nodes, redistribute loopback address and the node 1 sending the default route: **Node 1** -- cgit v1.2.3