From a88d809841b288a33c7df7c842c91763c4c4c009 Mon Sep 17 00:00:00 2001 From: currite Date: Thu, 17 Sep 2020 13:32:10 +0200 Subject: mss-clamping: remove unnecessary disable commnad, add directives and explanations --- docs/routing/mss-clamp.rst | 45 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 11 deletions(-) (limited to 'docs') diff --git a/docs/routing/mss-clamp.rst b/docs/routing/mss-clamp.rst index 986c5062..a4edf1c6 100644 --- a/docs/routing/mss-clamp.rst +++ b/docs/routing/mss-clamp.rst @@ -3,20 +3,34 @@ TCP-MSS Clamping ---------------- -As Internet wide PMTU discovery rarely works we sometimes need to clamp our TCP -MSS value to a specific value. Starting with VyOS 1.2 there is a firewall option -to clamp your TCP MSS value for IPv4 and IPv6. +As Internet wide PMTU discovery rarely works, we sometimes need to clamp +our TCP MSS value to a specific value. This is a field in the TCP +Options part of a SYN packet. By setting the MSS value, you are telling +the remote side unequivocally 'do not try to send me packets bigger than +this value'. -Clamping can be disabled per interface using the `disable` keyword: +Starting with VyOS 1.2 there is a firewall option to clamp your TCP MSS +value for IPv4 and IPv6. -.. code-block:: none - set firewall options interface pppoe0 disable +.. note:: MSS value = MTU - 20 (IP header) - 20 (TCP header), resulting + in 1452 bytes on a 1492 byte MTU. + IPv4 ^^^^ -Clamp outgoing MSS value in a TCP SYN packet to `1452` for `pppoe0` and `1372` +.. cfgcmd:: set firewall options interface adjust-mss + + Use this command to set the maximum segment size for IPv4 transit + packets on a specific interface (500-1460 bytes). + + +Example +""""""" + +Clamp outgoing MSS value in a TCP SYN packet to `1452` for `pppoe0` and +`1372` for your WireGuard `wg02` tunnel. .. code-block:: none @@ -27,15 +41,24 @@ for your WireGuard `wg02` tunnel. IPv6 ^^^^^ +.. cfgcmd:: set firewall options interface adjust-mss6 + + Use this command to set the maximum segment size for IPv6 transit + packets on a specific interface (1280-1492 bytes). + + +Example +""""""" + Clamp outgoing MSS value in a TCP SYN packet to `1280` for both `pppoe0` and `wg02` interface. -To achieve the same for IPv6 please use: - .. code-block:: none set firewall options interface pppoe0 adjust-mss6 '1280' set firewall options interface wg02 adjust-mss6 '1280' -.. note:: MSS value = MTU - 20 (IP header) - 20 (TCP header), resulting in 1452 - bytes on a 1492 byte MTU. + + +.. hint:: When doing your byte calculations, you might find useful this + `Visual packet size calculator `_. -- cgit v1.2.3