From c69d94e55266c661cd6be59c1648d3fb8180d6c9 Mon Sep 17 00:00:00 2001 From: currite Date: Fri, 31 Jan 2020 03:08:45 +0100 Subject: ospf: fix minimum ospf requirements --- docs/routing/ospf.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'docs') diff --git a/docs/routing/ospf.rst b/docs/routing/ospf.rst index acffb7b3..e29ad2ab 100644 --- a/docs/routing/ospf.rst +++ b/docs/routing/ospf.rst @@ -17,19 +17,19 @@ OSPFv2 (IPv4) ^^^^^^^^^^^^^ In order to have a VyOS system exchanging routes with OSPF neighbors, you will -at least need to configure the area and a network, +at least need to configure an OSPF area and some network. .. code-block:: none set protocols ospf area 0 network 192.168.0.0/24 -as well as the router ID. +That is the minimum configuration you will need. +It is a good practice to define the router ID too. .. code-block:: none set protocols ospf parameters router-id 10.1.1.1 -That is the minimum configuration you will need. Below you can see a typical configuration using 2 nodes, redistribute loopback address and the node 1 sending the default route: -- cgit v1.2.3