From b6682b9f8487896d3a9de1d4fd649d2a416f4282 Mon Sep 17 00:00:00 2001 From: fett0 Date: Fri, 25 Mar 2022 18:45:25 -0300 Subject: ospf: add export-list/import-list & mamixum-paths --- docs/configuration/protocols/ospf.rst | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'docs') diff --git a/docs/configuration/protocols/ospf.rst b/docs/configuration/protocols/ospf.rst index bb67653e..e69d10c0 100644 --- a/docs/configuration/protocols/ospf.rst +++ b/docs/configuration/protocols/ospf.rst @@ -162,6 +162,12 @@ Optional interfaces where router adjacencies are expected need to be configured with the :cfgcmd:`passive-interface-exclude` command. +.. cfgcmd:: set protocols ospf maximum-paths <1-64> + + Use this command to control the maximum number of equal cost paths to reach + a specific destination. The upper limit may differ if you change the value + of MULTIPATH_NUM during compilation. The default is MULTIPATH_NUM (64). + .. cfgcmd:: set protocols ospf refresh timers The router automatically updates link-state information with its neighbors. @@ -271,6 +277,18 @@ Area Configuration intra area paths from this range are not advertised into other areas. This command makes sense in ABR only. +.. cfgcmd:: set protocols ospf area export-list + + Filter Type-3 summary-LSAs announced to other areas originated from + intra- area paths from specified area. + This command makes sense in ABR only. + +.. cfgcmd:: set protocols ospf area import-list + + Same as export-list, but it applies to paths announced into specified + area as Type-3 summary-LSAs. + This command makes sense in ABR only. + .. cfgcmd:: set protocols ospf area range substitute -- cgit v1.2.3 From 5eed433ad6472f800971d0c73eff7552f02d068d Mon Sep 17 00:00:00 2001 From: fett0 Date: Fri, 25 Mar 2022 18:58:04 -0300 Subject: ospf: add export-list/import-list & mamixum-paths --- docs/configuration/protocols/ospf.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'docs') diff --git a/docs/configuration/protocols/ospf.rst b/docs/configuration/protocols/ospf.rst index e69d10c0..e3f9759e 100644 --- a/docs/configuration/protocols/ospf.rst +++ b/docs/configuration/protocols/ospf.rst @@ -38,10 +38,10 @@ starts when the first ospf enabled interface is configured. specified in decimal notation in the range from 0 to 4294967295. Or it can be specified in dotted decimal notation similar to ip address. - Prefix length in interface must be equal or bigger (i.e. smaller network) than - prefix length in network statement. For example statement above doesn't enable - ospf on interface with address 192.168.1.1/23, but it does on interface with - address 192.168.1.129/25. + Prefix length in interface must be equal or bigger (i.e. smaller network) + than prefix length in network statement. For example statement above doesn't + enable ospf on interface with address 192.168.1.1/23, but it does on + interface with address 192.168.1.129/25. In some cases it may be more convenient to enable OSPF on a per interface/subnet basis :cfgcmd:`set protocols ospf interface area ` -- cgit v1.2.3