.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} disable-flow-control Ethernet flow control is a mechanism for temporarily stopping the transmission of data on Ethernet family computer networks. The goal of this mechanism is to ensure zero packet loss in the presence of network congestion. The first flow control mechanism, the pause frame, was defined by the IEEE 802.3x standard. A sending station (computer or network switch) may be transmitting data faster than the other end of the link can accept it. Using flow control, the receiving station can signal the sender requesting suspension of transmissions until the receiver catches up. Use this command to disable the generation of Ethernet flow control (pause frames). Example: .. code-block:: none set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} disable-flow-control