IEEE 802.1q_, often referred to as Dot1q, is the networking standard that
supports virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The standard
defines a system of VLAN tagging for Ethernet frames and the accompanying
procedures to be used by bridges and switches in handling such frames.
The standard also contains provisions for a quality-of-service prioritization
scheme commonly known as IEEE 802.1p and defines the
Generic Attribute Registration Protocol.

Portions of the network which are VLAN-aware (i.e., IEEE 802.1q_ conformant) can
include VLAN tags. When a frame enters the VLAN-aware portion of the network, a
tag is added to represent the VLAN membership. Each frame must be
distinguishable as being within exactly one VLAN. A frame in the VLAN-aware
portion of the network that does not contain a VLAN tag is assumed to be
flowing on the native VLAN.

The standard was developed by IEEE 802.1, a working group of the IEEE 802
standards committee, and continues to be actively revised. One of the notable
revisions is 802.1Q-2014 which incorporated IEEE 802.1aq
(Shortest Path Bridging) and much of the IEEE 802.1d standard.

802.1q VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
term used for this is ``vif``.

.. cfgcmd:: set interfaces {{ var0 }} <interface> vif <vlan-id>

  Create a new VLAN interface on interface `<interface>` using the VLAN number
  provided via `<vlan-id>`.

  You can create multiple VLAN interfaces on a physical interface. The VLAN ID
  range is from 0 to 4094.

  .. note:: Only 802.1Q-tagged packets are accepted on Ethernet vifs.

.. cmdinclude:: /_include/interface-address-with-dhcp.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-description.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-disable.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-disable-link-detect.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-mac.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-mtu.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-adjust-mss.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-ip.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-ipv6.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-vrf.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

**DHCP(v6)**

.. cmdinclude:: /_include/interface-dhcp-options.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-dhcpv6-options.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. cmdinclude:: /_include/interface-dhcpv6-prefix-delegation.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
   :var2: vif
   :var3: <vlan-id>
   :var4: 10

.. include:: /_include/common-references.txt