.. _openfabric: ##### OpenFabric ##### OpenFabric, specified in `draft-white-openfabric-06.txt `_, is a routing protocol derived from IS-IS, providing link-state routing with efficient flooding for topologies like spine-leaf networks. OpenFabric a dual stack protocol. A single OpenFabric instance is able to perform routing for both IPv4 and IPv6. ******* General ******* Configuration ============= Mandatory Settings ------------------ For OpenFabric to operate correctly, one must do the equivalent of a Router ID in Connectionless Network Service (CLNS). This Router ID is called the :abbr:`NET (Network Entity Title)`. The system identifier must be unique within the network .. cfgcmd:: set protocols openfabric net This command sets network entity title (NET) provided in ISO format. Here is an example :abbr:`NET (Network Entity Title)` value: .. code-block:: none 49.0001.1921.6800.1002.00 The CLNS address consists of the following parts: * :abbr:`AFI (Address family authority identifier)` - ``49`` The AFI value 49 is what OpenFabric uses for private addressing. * Area identifier: ``0001`` OpenFabric area number (numerical area ``1``) * System identifier: ``1921.6800.1002`` - for system identifiers we recommend to use IP address or MAC address of the router itself. The way to construct this is to keep all of the zeroes of the router IP address, and then change the periods from being every three numbers to every four numbers. The address that is listed here is ``192.168.1.2``, which if expanded will turn into ``192.168.001.002``. Then all one has to do is move the dots to have four numbers instead of three. This gives us ``1921.6800.1002``. * :abbr:`NET (Network Entity Title)` selector: ``00`` Must always be 00. This setting indicates "this system" or "local system." .. cfgcmd:: set protocols openfabric domain interface address-family This command enables OpenFabric instance with on this interface, and allows for adjacency to occur for address family (IPv4 or IPv6 or both). OpenFabric Global Configuration -------------------------- .. cfgcmd:: set protocols openfabric domain-password This command configures the authentication password for a routing domain, as clear text or md5 one. .. cfgcmd:: set protocols openfabric domain purge-originator This command enables :rfc:`6232` purge originator identification. .. cfgcmd:: set protocols openfabric domain set-overload-bit This command sets overload bit to avoid any transit traffic through this router. .. cfgcmd:: set protocols openfabric domain log-adjacency-changes Log changes in adjacency state. .. cfgcmd:: set protocols openfabric domain fabric-tier This command sets a static tier number to advertise as location in the fabric. Interface Configuration ----------------------- .. cfgcmd:: set protocols openfabric interface hello-interval This command sets hello interval in seconds on a given interface. The range is 1 to 600. Hello packets are used to establish and maintain adjacency between OpenFabric neighbors. .. cfgcmd:: set protocols openfabric domain interface hello-multiplier This command sets multiplier for hello holding time on a given interface. The range is 2 to 100. .. cfgcmd:: set protocols openfabric domain interface metric This command sets default metric for circuit. The metric range is 1 to 16777215. .. cfgcmd:: set protocols openfabric interface passive This command enables the passive mode for this interface. .. cfgcmd:: set protocols openfabric domain interface password plaintext-password This command sets the authentication password for the interface. .. cfgcmd:: set protocols openfabric domain interface csnp-interval This command sets Complete Sequence Number Packets (CSNP) interval in seconds. The interval range is 1 to 600. .. cfgcmd:: set protocols openfabric domain interface psnp-interval This command sets Partial Sequence Number Packets (PSNP) interval in seconds. The interval range is 1 to 120. Timers ------ .. cfgcmd:: set protocols openfabric domain lsp-gen-interval This command sets minimum interval at which link-state packets (LSPs) are generated. The interval range is 1 to 120. .. cfgcmd:: set protocols openfabric domain lsp-refresh-interval This command sets LSP refresh interval in seconds. The interval range is 1 to 65235. .. cfgcmd:: set protocols openfabric domain max-lsp-lifetime This command sets LSP maximum LSP lifetime in seconds. The interval range is 360 to 65535. LSPs remain in a database for 1200 seconds by default. If they are not refreshed by that time, they are deleted. You can change the LSP refresh interval or the LSP lifetime. The LSP refresh interval should be less than the LSP lifetime or else LSPs will time out before they are refreshed. .. cfgcmd:: set protocols openfabric domain spf-interval This command sets minimum interval between consecutive shortest path first (SPF) calculations in seconds.The interval range is 1 to 120. ******** Examples ******** Enable OpenFabric ============ **Node 1:** .. code-block:: none set interfaces loopback lo address '192.168.255.255/32' set interfaces ethernet eth1 address '192.0.2.1/24' set protocols openfabric domain VyOS interface eth1 address-family ipv4 set protocols openfabric domain VyOS interface lo address-family ipv4 set protocols openfabric net '49.0001.1921.6825.5255.00' **Node 2:** .. code-block:: none set interfaces loopback lo address '192.168.255.254/32' set interfaces ethernet eth1 address '192.0.2.2/24' set protocols openfabric domain VyOS interface eth1 address-family ipv4 set protocols openfabric domain VyOS interface lo address-family ipv4 set protocols openfabric net '49.0001.1921.6825.5254.00' This gives us the following neighborships: .. code-block:: none Node-1@vyos:~$ show openfabric neighbor show openfabric neighbor Area VyOS: System Id Interface L State Holdtime SNPA vyos eth1 2 Up 27 2020.2020.2020 Node-2@vyos:~$ show openfabric neighbor show openfabric neighbor Area VyOS: System Id Interface L State Holdtime SNPA vyos eth1 2 Up 30 2020.2020.2020 Here's the IP routes that are populated: .. code-block:: none Node-1@vyos:~$ show ip route openfabric show ip route openfabric Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, f - OpenFabric, > - selected route, * - FIB route, q - queued, r - rejected, b - backup t - trapped, o - offload failure f 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 f>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 Node-2@vyos:~$ show ip route openfabric show ip route openfabric Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, f - OpenFabric, > - selected route, * - FIB route, q - queued, r - rejected, b - backup t - trapped, o - offload failure f 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 f>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48