:lastproofread: 2022-10-15 .. _user_management: ##################### Login/User Management ##################### The default VyOS user account (`vyos`), as well as newly created user accounts, have all capabilities to configure the system. All accounts have sudo capabilities and therefore can operate as root on the system. Both local administered and remote administered :abbr:`RADIUS (Remote Authentication Dial-In User Service)` accounts are supported. Local ===== .. cfgcmd:: set system login user full-name "" Create new system user with username `` and real-name specified by ``. .. cfgcmd:: set system login user authentication plaintext-password Specify the plaintext password user by user `` on this system. The plaintext password will be automatically transferred into a secure hashed password and not saved anywhere in plaintext. .. cfgcmd:: set system login user authentication encrypted-password Setup encrypted password for given username. This is useful for transferring a hashed password from system to system. .. _ssh_key_based_authentication: Key Based Authentication ------------------------ It is highly recommended to use SSH key authentication. By default there is only one user (``vyos``), and you can assign any number of keys to that user. You can generate a ssh key with the ``ssh-keygen`` command on your local machine, which will (by default) save it as ``~/.ssh/id_rsa.pub``. Every SSH key comes in three parts: ``ssh-rsa AAAAB3NzaC1yc2EAAAABAA...VBD5lKwEWB username@host.example.com`` Only the type (``ssh-rsa``) and the key (``AAAB3N...``) are used. Note that the key will usually be several hundred characters long, and you will need to copy and paste it. Some terminal emulators may accidentally split this over several lines. Be attentive when you paste it that it only pastes as a single line. The third part is simply an identifier, and is for your own reference. .. cfgcmd:: set system login user authentication public-keys key Assign the SSH public key portion `` identified by per-key `` to the local user ``. .. cfgcmd:: set system login user authentication public-keys type Every SSH public key portion referenced by `` requires the configuration of the `` of public-key used. This type can be any of: * ``ecdsa-sha2-nistp256`` * ``ecdsa-sha2-nistp384`` * ``ecdsa-sha2-nistp521`` * ``ssh-dss`` * ``ssh-ed25519`` * ``ssh-rsa`` .. note:: You can assign multiple keys to the same user by using a unique identifier per SSH key. .. cfgcmd:: set system login user authentication public-keys options Set the options for this public key. See the ssh ``authorized_keys`` man page for details of what you can specify here. To place a ``"`` character in the options field, use ``"``, for example ``from="10.0.0.0/24"`` to restrict where the user may connect from when using this key. .. cfgcmd:: loadkey **Deprecation notice:** ``loadkey`` has been deprecated in favour of :opcmd:`generate public-key-commands` and will be removed in a future version. See :ref:`ssh`. SSH keys can not only be specified on the command-line but also loaded for a given user with `` from a file pointed to by `.` Keys can be either loaded from local filesystem or any given remote location using one of the following :abbr:`URIs (Uniform Resource Identifier)`: * ```` - Load from file on local filesystem path * ``scp://@:/`` - Load via SCP from remote machine * ``sftp://@/`` - Load via SFTP from remote machine * ``ftp://@/`` - Load via FTP from remote machine * ``http:///`` - Load via HTTP from remote machine * ``tftp:///`` - Load via TFTP from remote machine MFA/2FA authentication using One-Time-Pad ----------------------------------------- It is possible to enhance authentication security by using the :abbr:`2FA (Two-factor authentication)`/:abbr:`MFA (Multi-factor authentication)` feature together with :abbr:`OTP (One-Time-Pad)` on VyOS. :abbr:`2FA (Two-factor authentication)`/:abbr:`MFA (Multi-factor authentication)` is configured independently per each user. If an OTP key is configured for a user, 2FA/MFA is automatically enabled for that particular user. If a user does not have an OTP key configured, there is no 2FA/MFA check for that user. .. cfgcmd:: set system login user authentication otp key Enable OTP 2FA for user `username` with default settings, using the BASE32 encoded 2FA/MFA key specified by ``. Optional/default settings ^^^^^^^^^^^^^^^^^^^^^^^^^ .. cfgcmd:: set system login user authentication otp rate-limit :defaultvalue: Limit logins to `` per every ``rate-time`` seconds. Rate limit must be between 1 and 10 attempts. .. cfgcmd:: set system login user authentication otp rate-time :defaultvalue: Limit logins to ``rate-limit`` attemps per every ``. Rate time must be between 15 and 600 seconds. .. cfgcmd:: set system login user authentication otp window-size :defaultvalue: Set window of concurrently valid codes. By default, a new token is generated every 30 seconds by the mobile application. In order to compensate for possible time-skew between the client and the server, an extra token before and after the current time is allowed. This allows for a time skew of up to 30 seconds between authentication server and client. For example, if problems with poor time synchronization are experienced, the window can be increased from its default size of 3 permitted codes (one previous code, the current code, the next code) to 17 permitted codes (the 8 previous codes, the current code, and the 8 next codes). This will permit for a time skew of up to 4 minutes between client and server. The window size must be between 1 and 21. RADIUS ====== In large deployments it is not reasonable to configure each user individually on every system. VyOS supports using :abbr:`RADIUS (Remote Authentication Dial-In User Service)` servers as backend for user authentication. Configuration ------------- .. cfgcmd:: set system login radius server
key Specify the `
` of the RADIUS server user with the pre-shared-secret given in ``. Multiple servers can be specified. .. cfgcmd:: set system login radius server
port Configure the discrete port under which the RADIUS server can be reached. This defaults to 1812. .. cfgcmd:: set system login radius server
timeout Setup the `` in seconds when querying the RADIUS server. .. cfgcmd:: set system login radius server
disable Temporary disable this RADIUS server. It won't be queried. .. cfgcmd:: set system login radius source-address
RADIUS servers could be hardened by only allowing certain IP addresses to connect. As of this the source address of each RADIUS query can be configured. If this is not set, incoming connections to the RADIUS server will use the nearest interface address pointing towards the server - making it error prone on e.g. OSPF networks when a link fails and a backup route is taken. .. hint:: If you want to have admin users to authenticate via RADIUS it is essential to sent the ``Cisco-AV-Pair shell:priv-lvl=15`` attribute. Without the attribute you will only get regular, non privilegued, system users. Login Banner ============ You are able to set post-login or pre-login banner messages to display certain information for this system. .. cfgcmd:: set system login banner pre-login Configure `` which is shown during SSH connect and before a user is logged in. .. cfgcmd:: set system login banner post-login Configure `` which is shown after user has logged in to the system. .. note:: To create a new line in your login message you need to escape the new line character by using ``\\n``. Example ======= In the following example, both `User1` and `User2` will be able to SSH into VyOS as user ``vyos`` using their very own keys. `User1` is restricted to only be able to connect from a single IP address. In addition if password base login is wanted for the ``vyos`` user a 2FA/MFA keycode is required in addition to the password. .. code-block:: none set system login user vyos authentication public-keys 'User1' key "AAAAB3Nz...KwEW" set system login user vyos authentication public-keys 'User1' type ssh-rsa set system login user vyos authentication public-keys 'User1' options "from="192.168.0.100"" set system login user vyos authentication public-keys 'User2' key "AAAAQ39x...fbV3" set system login user vyos authentication public-keys 'User2' type ssh-rsa set system login user vyos authentication otp key OHZ3OJ7U2N25BK4G7SOFFJTZDTCFUUE2 set system login user vyos authentication plaintext-password vyos