.. _routing-bfd:
###
BFD
###
:abbr:`BFD (Bidirectional Forwarding Detection)` is described and extended by
the following RFCs: :rfc:`5880`, :rfc:`5881` and :rfc:`5883`.
Configure BFD
=============
.. cfgcmd:: set protocols bfd
Set BFD peer IPv4 address or IPv6 address
.. cfgcmd:: set protocols bfd echo-mode
Enables the echo transmission mode
.. cfgcmd:: set protocols bfd multihop
Allow this BFD peer to not be directly connected
.. cfgcmd:: set protocols bfd source [address | interface ]
Bind listener to specifid interface/address, mandatory for IPv6
.. cfgcmd:: set protocols bfd interval echo-interval <10-60000>
The minimal echo receive transmission interval that this system is capable of handling
.. cfgcmd:: set protocols bfd interval multiplier <2-255>
Remote transmission interval will be multiplied by this value
.. cfgcmd:: set protocols bfd interval [receive | transmit] <10-60000>
Interval in milliseconds
.. cfgcmd:: set protocols bfd shutdown
Disable a BFD peer
Enable BFD in BGP
-----------------
.. cfgcmd:: set protocols bgp neighbor bfd
Enable BFD on a single BGP neighbor
.. cfgcmd:: set protocols bgp peer-group bfd
Enable BFD on a BGP peer group
Enable BFD in OSPF
------------------
.. cfgcmd:: set interfaces ethernet ip ospf bfd
Enable BFD for ospf on a interface
.. cfgcmd:: set interfaces ethernet ipv6 ospfv3 bfd
Enable BFD for ospfv3 on a interface
Operational Commands
====================
.. opcmd:: show protocols bfd peer
Show all BFD peers
.. code-block:: none
BFD Peers:
peer 198.51.100.33 vrf default interface eth4.100
ID: 4182341893
Remote ID: 12678929647
Status: up
Uptime: 1 month(s), 16 hour(s), 29 minute(s), 38 second(s)
Diagnostics: ok
Remote diagnostics: ok
Local timers:
Receive interval: 300ms
Transmission interval: 300ms
Echo transmission interval: 50ms
Remote timers:
Receive interval: 300ms
Transmission interval: 300ms
Echo transmission interval: 0ms
peer 198.51.100.55 vrf default interface eth4.101
ID: 4618932327
Remote ID: 3312345688
Status: up
Uptime: 20 hour(s), 16 minute(s), 19 second(s)
Diagnostics: ok
Remote diagnostics: ok
Local timers:
Receive interval: 300ms
Transmission interval: 300ms
Echo transmission interval: 50ms
Remote timers:
Receive interval: 300ms
Transmission interval: 300ms
Echo transmission interval: 0ms