.. _openvpn: ####### OpenVPN ####### Traditionally hardware routers implement IPsec exclusively due to relative ease of implementing it in hardware and insufficient CPU power for doing encryption in software. Since VyOS is a software router, this is less of a concern. OpenVPN has been widely used on UNIX platform for a long time and is a popular option for remote access VPN, though it's also capable of site-to-site connections. Advantages of OpenVPN are: * It uses a single TCP or UDP connection and does not rely on packet source addresses, so it will work even through a double NAT: perfect for public hotspots and such * It's easy to setup and offers very flexible split tunneling * There's a variety of client GUI frontends for any platform Disadvantages are: * It's slower than IPsec due to higher protocol overhead and the fact it runs in user mode while IPsec, on Linux, is in kernel mode * None of the operating systems have client software installed by default In the VyOS CLI, a key point often overlooked is that rather than being configured using the `set vpn` stanza, OpenVPN is configured as a network interface using `set interfaces openvpn`. Site-To-Site ============ While many are aware of OpenVPN as a Client VPN solution, it is often overlooked as a site-to-site VPN solution due to lack of support for this mode in many router platforms. Site-to-site mode supports x.509 but doesn't require it and can also work with static keys, which is simpler in many cases. In this example, we'll configure a simple site-to-site OpenVPN tunnel using a 2048-bit pre-shared key. First, one of the systems generate the key using the operational command ``generate openvpn key <filename>``. This will generate a key with the name provided in the ``/config/auth/`` directory. Once generated, you will need to copy this key to the remote router. In our example, we used the filename ``openvpn-1.key`` which we will reference in our configuration. * The public IP address of the local side of the VPN will be 198.51.100.10 * The remote will be 203.0.113.11 * The tunnel will use 10.255.1.1 for the local IP and 10.255.1.2 for the remote. * OpenVPN allows for either TCP or UDP. UDP will provide the lowest latency, while TCP will work better for lossy connections; generally UDP is preferred when possible. * The official port for OpenVPN is 1194, which we reserve for client VPN; we will use 1195 for site-to-site VPN. * The ``persistent-tunnel`` directive will allow us to configure tunnel-related attributes, such as firewall policy as we would on any normal network interface. * If known, the IP of the remote router can be configured using the ``remote-host`` directive; if unknown, it can be omitted. We will assume a dynamic IP for our remote router. Local Configuration: .. code-block:: none set interfaces openvpn vtun1 mode site-to-site set interfaces openvpn vtun1 protocol udp set interfaces openvpn vtun1 persistent-tunnel set interfaces openvpn vtun1 local-host '198.51.100.10' set interfaces openvpn vtun1 local-port '1195' set interfaces openvpn vtun1 remote-port '1195' set interfaces openvpn vtun1 shared-secret-key-file '/config/auth/openvpn-1.key' set interfaces openvpn vtun1 local-address '10.255.1.1' set interfaces openvpn vtun1 remote-address '10.255.1.2' Remote Configuration: .. code-block:: none set interfaces openvpn vtun1 mode site-to-site set interfaces openvpn vtun1 protocol udp set interfaces openvpn vtun1 persistent-tunnel set interfaces openvpn vtun1 remote-host '198.51.100.10' set interfaces openvpn vtun1 local-port '1195' set interfaces openvpn vtun1 remote-port '1195' set interfaces openvpn vtun1 shared-secret-key-file '/config/auth/openvpn-1.key' set interfaces openvpn vtun1 local-address '10.255.1.2' set interfaces openvpn vtun1 remote-address '10.255.1.1' The configurations above will default to using 256-bit AES in GCM mode for encryption (if both sides supports NCP) and SHA-1 for HMAC authentication. SHA-1 is considered weak, but other hashing algorithms are available, as are encryption algorithms: For Encryption: This sets the cipher when NCP (Negotiable Crypto Parameters) is disabled or OpenVPN version < 2.4.0. .. code-block:: none vyos@vyos# set interfaces openvpn vtun1 encryption cipher Possible completions: des DES algorithm 3des DES algorithm with triple encryption bf128 Blowfish algorithm with 128-bit key bf256 Blowfish algorithm with 256-bit key aes128 AES algorithm with 128-bit key CBC aes128gcm AES algorithm with 128-bit key GCM aes192 AES algorithm with 192-bit key CBC aes192gcm AES algorithm with 192-bit key GCM aes256 AES algorithm with 256-bit key CBC aes256gcm AES algorithm with 256-bit key GCM This sets the accepted ciphers to use when version => 2.4.0 and NCP is enabled (which is default). Default NCP cipher for versions >= 2.4.0 is aes256gcm. The first cipher in this list is what server pushes to clients. .. code-block:: none vyos@vyos# set int open vtun0 encryption ncp-ciphers Possible completions: des DES algorithm 3des DES algorithm with triple encryption aes128 AES algorithm with 128-bit key CBC aes128gcm AES algorithm with 128-bit key GCM aes192 AES algorithm with 192-bit key CBC aes192gcm AES algorithm with 192-bit key GCM aes256 AES algorithm with 256-bit key CBC aes256gcm AES algorithm with 256-bit key GCM For Hashing: .. code-block:: none vyos@vyos# set interfaces openvpn vtun1 hash Possible completions: md5 MD5 algorithm sha1 SHA-1 algorithm sha256 SHA-256 algorithm sha512 SHA-512 algorithm If you change the default encryption and hashing algorithms, be sure that the local and remote ends have matching configurations, otherwise the tunnel will not come up. Static routes can be configured referencing the tunnel interface; for example, the local router will use a network of 10.0.0.0/16, while the remote has a network of 10.1.0.0/16: Local Configuration: .. code-block:: none set protocols static interface-route 10.1.0.0/16 next-hop-interface vtun1 Remote Configuration: .. code-block:: none set protocols static interface-route 10.0.0.0/16 next-hop-interface vtun1 Firewall policy can also be applied to the tunnel interface for `local`, `in`, and `out` directions and function identically to ethernet interfaces. If making use of multiple tunnels, OpenVPN must have a way to distinguish between different tunnels aside from the pre-shared-key. This is either by referencing IP address or port number. One option is to dedicate a public IP to each tunnel. Another option is to dedicate a port number to each tunnel (e.g. 1195,1196,1197...). OpenVPN status can be verified using the `show openvpn` operational commands. See the built-in help for a complete list of options. Server ====== Multi-client server is the most popular OpenVPN mode on routers. It always uses x.509 authentication and therefore requires a PKI setup. This guide assumes you have already setup a PKI and have a CA certificate, a server certificate and key, a certificate revocation list, a Diffie-Hellman key exchange parameters file. You do not need client certificates and keys for the server setup. In this example we will use the most complicated case: a setup where each client is a router that has its own subnet (think HQ and branch offices), since simpler setups are subsets of it. Suppose you want to use 10.23.1.0/24 network for client tunnel endpoints and all client subnets belong to 10.23.0.0/20. All clients need access to the 192.168.0.0/16 network. First we need to specify the basic settings. 1194/UDP is the default. The ``persistent-tunnel`` option is recommended, it prevents the TUN/TAP device from closing on connection resets or daemon reloads. .. note:: Using **openvpn-option -reneg-sec** can be tricky. This option is used to renegotiate data channel after n seconds. When used at both server and client, the lower value will trigger the renegotiation. If you set it to 0 on one side of the connection (to disable it), the chosen value on the other side will determine when the renegotiation will occur. .. code-block:: none set interfaces openvpn vtun10 mode server set interfaces openvpn vtun10 local-port 1194 set interfaces openvpn vtun10 persistent-tunnel set interfaces openvpn vtun10 protocol udp Then we need to specify the location of the cryptographic materials. Suppose you keep the files in `/config/auth/openvpn` .. code-block:: none set interfaces openvpn vtun10 tls ca-cert-file /config/auth/openvpn/ca.crt set interfaces openvpn vtun10 tls cert-file /config/auth/openvpn/server.crt set interfaces openvpn vtun10 tls key-file /config/auth/openvpn/server.key set interfaces openvpn vtun10 tls crl-file /config/auth/openvpn/crl.pem set interfaces openvpn vtun10 tls dh-file /config/auth/openvpn/dh2048.pem Now we need to specify the server network settings. In all cases we need to specify the subnet for client tunnel endpoints. Since we want clients to access a specific network behind out router, we will use a push-route option for installing that route on clients. .. code-block:: none set interfaces openvpn vtun10 server push-route 192.168.0.0/16 set interfaces openvpn vtun10 server subnet 10.23.1.0/24 Since it's a HQ and branch offices setup, we will want all clients to have fixed addresses and we will route traffic to specific subnets through them. We need configuration for each client to achieve this. .. note:: Clients are identified by the CN field of their x.509 certificates, in this example the CN is ``client0``: .. code-block:: none set interfaces openvpn vtun10 server client client0 ip 10.23.1.10 set interfaces openvpn vtun10 server client client0 subnet 10.23.2.0/25 OpenVPN **will not** automatically create routes in the kernel for client subnets when they connect and will only use client-subnet association internally, so we need to create a route to the 10.23.0.0/20 network ourselves: .. code-block:: none set protocols static interface-route 10.23.0.0/20 next-hop-interface vtun10 Client Authentication --------------------- LDAP **** Enterprise installations usually ship a kind of directory service which is used to have a single password store for all employees. VyOS and OpenVPN support using LDAP/AD as single user backend. Authentication is done by using the ``openvpn-auth-ldap.so`` plugin which is shipped with every VyOS installation. A dedicated configuration file is required. It is best practise to store it in ``/config`` to survive image updates .. code-block:: none set interfaces openvpn vtun0 openvpn-option "--plugin /usr/lib/openvpn/openvpn-auth-ldap.so /config/auth/ldap-auth.config" The required config file may look like: .. code-block:: none <LDAP> # LDAP server URL URL ldap://ldap.example.com # Bind DN (If your LDAP server doesn't support anonymous binds) BindDN cn=LDAPUser,dc=example,dc=com # Bind Password password Password S3cr3t # Network timeout (in seconds) Timeout 15 </LDAP> <Authorization> # Base DN BaseDN "ou=people,dc=example,dc=com" # User Search Filter SearchFilter "(&(uid=%u)(objectClass=shadowAccount))" # Require Group Membership - allow all users RequireGroup false </Authorization> Active Directory **************** Despite the fact that AD is a superset of LDAP .. code-block:: none <LDAP> # LDAP server URL URL ldap://dc01.example.com # Bind DN (If your LDAP server doesn’t support anonymous binds) BindDN CN=LDAPUser,DC=example,DC=com # Bind Password Password mysecretpassword # Network timeout (in seconds) Timeout 15 # Enable Start TLS TLSEnable no # Follow LDAP Referrals (anonymously) FollowReferrals no </LDAP> <Authorization> # Base DN BaseDN "DC=example,DC=com" # User Search Filter, user must be a member of the VPN AD group SearchFilter "(&(sAMAccountName=%u)(memberOf=CN=VPN,OU=Groups,DC=example,DC=com))" # Require Group Membership RequireGroup false # already handled by SearchFilter <Group> BaseDN "OU=Groups,DC=example,DC=com" SearchFilter "(|(cn=VPN))" MemberAttribute memberOf </Group> </Authorization> If you only want to check if the user account is enabled and can authenticate (against the primary group) the following snipped is sufficient: .. code-block:: none <LDAP> URL ldap://dc01.example.com BindDN CN=SA_OPENVPN,OU=ServiceAccounts,DC=example,DC=com Password ThisIsTopSecret Timeout 15 TLSEnable no FollowReferrals no </LDAP> <Authorization> BaseDN "DC=example,DC=com" SearchFilter "sAMAccountName=%u" RequireGroup false </Authorization> A complete LDAP auth OpenVPN configuration could look like the following example: .. code-block:: none vyos@vyos# show interfaces openvpn openvpn vtun0 { mode server openvpn-option "--tun-mtu 1500 --fragment 1300 --mssfix" openvpn-option "--plugin /usr/lib/openvpn/openvpn-auth-ldap.so /config/auth/ldap-auth.config" openvpn-option "--push redirect-gateway" openvpn-option --duplicate-cn openvpn-option --client-cert-not-required openvpn-option --comp-lzo openvpn-option --persist-key openvpn-option --persist-tun server { domain-name example.com max-connections 5 name-server 1.1.1.1 name-server 9.9.9.9 subnet 172.18.100.128/29 } tls { ca-cert-file /config/auth/ca.crt cert-file /config/auth/server.crt dh-file /config/auth/dh1024.pem key-file /config/auth/server.key } } Client ====== VyOS can not only act as an OpenVPN site-to-site or Server for multiple clients. You can indeed also configure any VyOS OpenVPN interface as an OpenVPN client connecting to a VyOS OpenVPN server or any other OpenVPN server. Given the following example we have one VyOS router acting as OpenVPN server and another VyOS router acting as OpenVPN client. The Server also pushes a static client IP address to the OpenVPN client. Remember, clients are identified using their CN attribute in the SSL certificate. Server ------ .. code-block:: none set interfaces openvpn vtun10 encryption cipher 'aes256' set interfaces openvpn vtun10 hash 'sha512' set interfaces openvpn vtun10 local-host '172.18.201.10' set interfaces openvpn vtun10 local-port '1194' set interfaces openvpn vtun10 mode 'server' set interfaces openvpn vtun10 persistent-tunnel set interfaces openvpn vtun10 protocol 'udp' set interfaces openvpn vtun10 server client client1 ip '10.10.0.10' set interfaces openvpn vtun10 server domain-name 'vyos.net' set interfaces openvpn vtun10 server max-connections '250' set interfaces openvpn vtun10 server name-server '172.16.254.30' set interfaces openvpn vtun10 server subnet '10.10.0.0/24' set interfaces openvpn vtun10 server topology 'subnet' set interfaces openvpn vtun10 tls ca-cert-file '/config/auth/ca.crt' set interfaces openvpn vtun10 tls cert-file '/config/auth/server.crt' set interfaces openvpn vtun10 tls dh-file '/config/auth/dh.pem' set interfaces openvpn vtun10 tls key-file '/config/auth/server.key' set interfaces openvpn vtun10 use-lzo-compression Client ------ .. code-block:: none set interfaces openvpn vtun10 encryption cipher 'aes256' set interfaces openvpn vtun10 hash 'sha512' set interfaces openvpn vtun10 mode 'client' set interfaces openvpn vtun10 persistent-tunnel set interfaces openvpn vtun10 protocol 'udp' set interfaces openvpn vtun10 remote-host '172.18.201.10' set interfaces openvpn vtun10 remote-port '1194' set interfaces openvpn vtun10 tls ca-cert-file '/config/auth/ca.crt' set interfaces openvpn vtun10 tls cert-file '/config/auth/client1.crt' set interfaces openvpn vtun10 tls key-file '/config/auth/client1.key' set interfaces openvpn vtun10 use-lzo-compression Options ======= We do not have CLI nodes for every single OpenVPN options. If an option is missing, a feature request should be opened at https://phabricator.vyos.net so all users can benefit from it. If you are a hacker or want to try on your own we support passing raw OpenVPN options to OpenVPN. .. cfgcmd:: set interfaces openvpn vtun10 openvpn-option 'persistent-key' Will add ``persistent-key`` at the end of the generated OpenVPN configuration. Please use this only as last resort - things might break and OpenVPN won't start if you pass invalid options/syntax. .. cfgcmd:: set interfaces openvpn vtun10 openvpn-option 'push "keepalive 1 10"' Will add ``push "keepalive 1 10"`` to the generated OpenVPN config file. .. note:: Sometimes option lines in the generated OpenVPN configurarion require quotes. This is done through a hack on our config generator. You can pass quotes using the ``"`` statement.