1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
:lastproofread: 2023-11-23
########
Firewall
########
As VyOS is based on Linux it leverages its firewall. The Netfilter project
created iptables and its successor nftables for the Linux kernel to
work directly on packet data flows. This now extends the concept of
zone-based security to allow for manipulating the data at multiple stages once
accepted by the network interface and the driver before being handed off to
the destination (e.g., a web server OR another device).
A simplified traffic flow diagram, based on Netfilter packet flow, is shown
next, in order to have a full view and understanding of how packets are
processed, and what possible paths traffic can take.
.. figure:: /_static/images/firewall-gral-packet-flow.png
The main points regarding this packet flow and terminology used in VyOS
firewall are covered below:
* **Bridge Port?**: choose appropriate path based on whether interface
where the packet was received is part of a bridge, or not.
If the interface where the packet was received isn't part of a bridge, then
packetis processed at the **IP Layer**:
* **Prerouting**: several actions can be done in this stage, and currently
these actions are defined in different parts in VyOS configuration. Order
is important, and all these actions are performed before any actions
defined under ``firewall`` section. Relevant configuration that acts in
this stage are:
* **Conntrack Ignore**: rules defined under ``set system conntrack ignore
[ipv4 | ipv6] ...``.
* **Policy Route**: rules defined under ``set policy [route | route6]
...``.
* **Destination NAT**: rules defined under ``set [nat | nat66]
destination...``.
* **Destination is the router?**: choose appropriate path based on
destination IP address. Transit forward continues to **forward**,
while traffic that destination IP address is configured on the router
continues to **input**.
* **Input**: stage where traffic destined for the router itself can be
filtered and controlled. This is where all rules for securing the router
should take place. This includes ipv4 and ipv6 filtering rules, defined
in:
* ``set firewall ipv4 input filter ...``.
* ``set firewall ipv6 input filter ...``.
* **Forward**: stage where transit traffic can be filtered and controlled.
This includes ipv4 and ipv6 filtering rules, defined in:
* ``set firewall ipv4 forward filter ...``.
* ``set firewall ipv6 forward filter ...``.
* **Output**: stage where traffic that originates from the router itself
can be filtered and controlled. Bear in mind that this traffic can be a
new connection originated by a internal process running on VyOS router,
such as NTP, or a response to traffic received externaly through
**input** (for example response to an ssh login attempt to the router).
This includes ipv4 and ipv6 filtering rules, defined in:
* ``set firewall ipv4 output filter ...``.
* ``set firewall ipv6 output filter ...``.
* **Postrouting**: as in **Prerouting**, several actions defined in
different parts of VyOS configuration are performed in this
stage. This includes:
* **Source NAT**: rules defined under ``set [nat | nat66]
destination...``.
If the interface where the packet was received is part of a bridge, then
the packet is processed at the **Bridge Layer**, which contains a basic setup for
bridge filtering:
* **Forward (Bridge)**: stage where traffic that is trespasing through the
bridge is filtered and controlled:
* ``set firewall bridge forward filter ...``.
The main structure of the VyOS firewall CLI is shown next:
.. code-block:: none
- set firewall
* bridge
- forward
+ filter
* flowtable
- custom_flow_table
+ ...
* global-options
+ all-ping
+ broadcast-ping
+ ...
* group
- address-group
- ipv6-address-group
- network-group
- ipv6-network-group
- interface-group
- mac-group
- port-group
- domain-group
* ipv4
- forward
+ filter
- input
+ filter
- output
+ filter
- name
+ custom_name
* ipv6
- forward
+ filter
- input
+ filter
- output
+ filter
- ipv6-name
+ custom_name
* zone
- custom_zone_name
+ ...
Please, refer to appropriate section for more information about firewall
configuration:
.. toctree::
:maxdepth: 1
:includehidden:
global-options
groups
bridge
ipv4
ipv6
flowtables
.. note:: **For more information**
of Netfilter hooks and Linux networking packet flows can be
found in `Netfilter-Hooks
<https://wiki.nftables.org/wiki-nftables/index.php/Netfilter_hooks>`_
Zone-based firewall
^^^^^^^^^^^^^^^^^^^
.. toctree::
:maxdepth: 1
:includehidden:
zone
With zone-based firewalls a new concept was implemented, in addtion to the
standard in and out traffic flows, a local flow was added. This local was for
traffic originating and destined to the router itself. Which means additional
rules were required to secure the firewall itself from the network, in
addition to the existing inbound and outbound rules from the traditional
concept above.
To configure VyOS with the
:doc:`zone-based firewall configuration </configuration/firewall/zone>`
As the example image below shows, the device now needs rules to allow/block
traffic to or from the services running on the device that have open
connections on that interface.
.. figure:: /_static/images/firewall-zonebased.png
|
