path: root/docs/configuration/service/dhcp-server.rst

.. _dhcp-server:

###########
DHCP Server
###########

VyOS uses ISC DHCP server for both IPv4 and IPv6 address assignment.

***********
IPv4 server
***********

The network topology is declared by shared-network-name and the subnet
declarations. The DHCP service can serve multiple shared networks, with each
shared network having 1 or more subnets. Each subnet must be present on an
interface. A range can be declared inside a subnet to define a pool of dynamic
addresses. Multiple ranges can be defined and can contain holes. Static
mappings can be set to assign "static" addresses to clients based on their MAC
address.

Configuration
=============

.. cfgcmd:: set service dhcp-server shared-network-name <name> authoritative

   This says that this device is the only DHCP server for this network. If other
   devices are trying to offer DHCP leases, this machine will send 'DHCPNAK' to
   any device trying to request an IP address that is not valid for this
   network.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   default-router <address>

   This is a configuration parameter for the `<subnet>`, saying that as part of
   the response, tell the client that the default gateway can be reached at
   `<address>`.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   name-server <address>

   This is a configuration parameter for the subnet, saying that as part of the
   response, tell the client that the DNS server can be found at `<address>`.

   Multiple DNS servers can be defined.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   lease <time>

   Assign the IP address to this machine for `<time>` seconds.

   The default value is 86400 seconds which corresponds to one day.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   range <n> start <address>

   Create DHCP address range with a range id of `<n>`. DHCP leases are taken
   from this pool. The pool starts at address `<address>`.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   range <n> stop <address>

   Create DHCP address range with a range id of `<n>`. DHCP leases are taken
   from this pool. The pool stops with address `<address>`.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   exclude <address>

   Always exclude this address from any defined range. This address will never
   be assigned by the DHCP server.

   This option can be specified multiple times.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   domain-name <domain-name>

   The domain-name parameter should be the domain name that will be appended to
   the client's hostname to form a fully-qualified domain-name (FQDN) (DHCP
   Option 015).

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet <subnet>
   domain-search <domain-name>

   The domain-name parameter should be the domain name used when completing DNS
   request where no full FQDN is passed. This option can be given multiple times
   if you need multiple search domains (DHCP Option 119).

Failover
--------

VyOS provides support for DHCP failover. DHCP failover must be configured
explicitly by the following statements.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet
   <subnet> failover local-address <address>

   Local IP `<address>` used when communicating to the failover peer.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet
   <subnet> failover peer-address <address>

   Remote peer IP `<address>` of the second DHCP server in this failover
   cluster.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet
   <subnet> failover name <name>

   A generic `<name>` referencing this sync service.

   .. note:: `<name>` must be identical on both sides!

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet
   <subnet> failover status <primary | secondary>

   The primary and secondary statements determines whether the server is primary
   or secondary.

   .. note:: In order for the primary and the secondary DHCP server to keep
      their lease tables in sync, they must be able to reach each other on TCP
      port 647. If you have firewall rules in effect, adjust them accordingly.

   .. hint:: The dialogue between failover partners is neither encrypted nor
      authenticated. Since most DHCP servers exist within an organisation's own
      secure Intranet, this would be an unnecessary overhead. However, if you
      have DHCP failover peers whose communications traverse insecure networks,
      then we recommend that you consider the use of VPN tunneling between them
      to ensure that the failover partnership is immune to disruption
      (accidental or otherwise) via third parties.

Static mappings
---------------

You can specify a static DHCP assignment on a per host basis. You will need the
MAC address of the station and your desired IP address. The address must be
inside the subnet definition but can be outside of the range statement.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet
   <subnet> static-mapping <description> mac-address <address>

   Create a new DHCP static mapping named `<description>` which is valid for
   the host identified by its MAC `<address>`.

.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet
   <subnet> static-mapping <description> ip-address <address>

   Static DHCP IP address assign to host identified by `<description>`. IP
   address must be inside the `<subnet>` which is defined but can be outside
   the dynamic range created with :cfgcmd:`set service dhcp-server
   shared-network-name <name> subnet <subnet> range <n>`. If no ip-address is
   specified, an IP from the dynamic pool is used.

   This is useful, for example, in combination with hostfile update.

   .. hint:: This is the equivalent of the host block in dhcpd.conf of
      isc-dhcpd.

Options
=======

.. list-table::
   :header-rows: 1
   :stub-columns: 0
   :widths: 12 7 23 40 20

   * - Setting name
     - Option number
     - ISC-DHCP Option name
     - Option description
     - Multi
   * - client-prefix-length
     - 1
     - subnet-mask
     - Specifies the clients subnet mask as per RFC 950. If unset,
       subnet declaration is used.
     - N
   * - time-offset
     - 2
     - time-offset
     - Offset of the client's subnet in seconds from Coordinated
       Universal Time (UTC)
     - N
   * - default-router
     - 3
     - routers
     - IPv4 address of router on the client's subnet
     - N
   * - time-server
     - 4
     - time-servers
     - RFC 868 time server IPv4 address
     - Y
   * - name-server
     - 6
     - domain-name-servers
     - DNS server IPv4 address
     - Y
   * - domain-name
     - 15
     - domain-name
     - Client domain name
     - Y
   * - ip-forwarding
     - 19
     - ip-forwarding
     - Enable IP forwarding on client
     - N
   * - ntp-server
     - 42
     - ntp-servers
     - IP address of NTP server
     - Y
   * - wins-server
     - 44
     - netbios-name-servers
     - NetBIOS over TCP/IP name server
     - Y
   * - server-identifier
     - 54
     - dhcp-server-identifier
     - IP address for DHCP server identifier
     - N
   * - bootfile-server
     - siaddr
     - next-server
     - IPv4 address of next bootstrap server
     - N
   * - tftp-server-name
     - 66
     - tftp-server-name
     - Name or IPv4 address of TFTP server
     - N
   * - bootfile-name
     - 67
     - bootfile-name, filename
     - Bootstrap file name
     - N
   * - smtp-server
     - 69
     - smtp-server
     - IP address of SMTP server
     - Y
   * - pop-server
     - 70
     - pop-server
     - IP address of POP3 server
     - Y
   * - domain-search
     - 119
     - domain-search
     - Client domain search
     - Y
   * - static-route
     - 121, 249
     - rfc3442-static-route, windows-static-route
     - Classless static route
     - N
   * - wpad-url
     - 252
     - wpad-url, wpad-url code 252 = text
     - Web Proxy Autodiscovery (WPAD) URL
     - N
   * - lease
     -
     - default-lease-time, max-lease-time
     - Lease timeout in seconds (default: 86400)
     - N
   * - range
     -
     - range
     - DHCP lease range
     - Y
   * - exclude
     -
     -
     - IP address to exclude from DHCP lease range
     - Y
   * - failover
     -
     -
     - DHCP failover parameters
     -
   * - static-mapping
     -
     -
     - Name of static mapping
     - Y

Multi: can be specified multiple times.

Raw Parameters
==============

Raw parameters can be passed to shared-network-name, subnet and static-mapping:

.. code-block:: none

  set service dhcp-server shared-network-name <name> shared-network-parameters
     <text>       Additional shared-network parameters for DHCP server.
  set service dhcp-server shared-network-name <name> subnet <subnet> subnet-parameters
     <text>       Additional subnet parameters for DHCP server.
  set service dhcp-server shared-network-name <name> subnet <subnet> static-mapping <description> static-mapping-parameters
     <text>       Additional static-mapping parameters for DHCP server.
                  Will be placed inside the "host" block of the mapping.

These parameters are passed as-is to isc-dhcp's dhcpd.conf under the
configuration node they are defined in. They are not validated so an error in
the raw parameters won't be caught by vyos's scripts and will cause dhcpd to
fail to start. Always verify that the parameters are correct before committing
the configuration. Refer to isc-dhcp's dhcpd.conf manual for more information:
https://kb.isc.org/docs/isc-dhcp-44-manual-pages-dhcpdconf

Quotes can be used inside parameter values by replacing all quote characters
with the string ``&quot;``. They will be replaced with literal quote characters
when generating dhcpd.conf.

Example
=======

Please see the :ref:`dhcp-dns-quick-start` configuration.

Failover
--------

Configuration of a DHCP failover pair

* Setup DHCP failover for network 192.0.2.0/24
* Default gateway and DNS server is at `192.0.2.254`
* The primary DHCP server uses address `192.168.189.252`
* The secondary DHCP server uses address `192.168.189.253`
* DHCP range spans from `192.168.189.10` - `192.168.189.250`

Common configuration, valid for both primary and secondary node.

.. code-block:: none

  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 default-router '192.0.2.254'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 name-server '192.0.2.254'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 domain-name 'vyos.net'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 range 0 start '192.0.2.10'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 range 0 stop '192.0.2.250'


**Primary**

.. code-block:: none

  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover local-address '192.168.189.252'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover name 'NET-VYOS'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover peer-address '192.168.189.253'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover status 'primary'

**Secondary**

.. code-block:: none

  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover local-address '192.168.189.253'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover name 'NET-VYOS'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover peer-address '192.168.189.252'
  set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover status 'secondary'


Raw Parameters
--------------

* Override static-mapping's name-server with a custom one that will be sent only
  to this host.
* An option that takes a quoted string is set by replacing all quote characters
  with the string ``&quot;`` inside the static-mapping-parameters value.
  The resulting line in dhcpd.conf will be
  ``option pxelinux.configfile "pxelinux.cfg/01-00-15-17-44-2d-aa";``.


.. code-block:: none

  set service dhcp-server shared-network-name dhcpexample subnet 192.0.2.0/24 static-mapping example static-mapping-parameters "option domain-name-servers 192.0.2.11, 192.0.2.12;"
  set service dhcp-server shared-network-name dhcpexample subnet 192.0.2.0/24 static-mapping example static-mapping-parameters "option pxelinux.configfile &quot;pxelinux.cfg/01-00-15-17-44-2d-aa&quot;;"

Option 43 for UniFI
-------------------

* These parameters need to be part of the DHCP global options. They stay unchanged.


.. code-block:: none

 set service dhcp-server global-parameters 'option space ubnt;'
 set service dhcp-server global-parameters 'option ubnt.unifi-address code 1 = ip-address;'
 set service dhcp-server global-parameters 'class &quot;ubnt&quot; {'
 set service dhcp-server global-parameters 'match if substring (option vendor-class-identifier, 0, 4) = &quot;ubnt&quot;;'
 set service dhcp-server global-parameters 'option vendor-class-identifier &quot;ubnt&quot;;'
 set service dhcp-server global-parameters 'vendor-option-space ubnt;'
 set service dhcp-server global-parameters '}'

* Now we add the option to the scope, adapt to your setup


.. code-block:: none

 set service dhcp-server shared-network-name example-scope subnet 10.1.1.0/24 subnet-parameters 'option ubnt.unifi-address 172.16.1.10;'


Operation Mode
==============

.. opcmd:: restart dhcp server

   Restart the DHCP server

.. opcmd:: show dhcp server statistics

   Show the DHCP server statistics:

.. code-block:: none

  vyos@vyos:~$ show dhcp server statistics
  Pool           Size    Leases    Available  Usage
  -----------  ------  --------  -----------  -------
  dhcpexample      99         2           97  2%

.. opcmd:: show dhcp server statistics pool <pool>

   Show the DHCP server statistics for the specified pool.

.. opcmd:: show dhcp server leases

   Show statuses of all active leases:

.. code-block:: none

  vyos@vyos:~$ show dhcp server leases
  IP address      Hardware address    State    Lease start          Lease expiration     Remaining   Pool         Hostname
  --------------  ------------------  -------  -------------------  -------------------  ----------  -----------  ---------
  192.0.2.104     00:53:01:dd:ee:ff   active   2019/12/05 14:24:23  2019/12/06 02:24:23  6:05:35     dhcpexample  test1
  192.0.2.115     00:53:01:ae:af:bf   active   2019/12/05 18:02:37  2019/12/06 06:02:37  9:43:49     dhcpexample  test2

.. hint:: Static mappings aren't shown. To show all states, use
   ``show dhcp server leases state all``.

.. opcmd:: show dhcp server leases pool <pool>

   Show only leases in the specified pool.

.. opcmd:: show dhcp server leases sort <key>

   Sort the output by the specified key. Possible keys: ip, hardware_address,
   state, start, end, remaining, pool, hostname (default = ip)

.. opcmd:: show dhcp server leases state <state>

   Show only leases with the specified state. Possible states: all, active,
   free, expired, released, abandoned, reset, backup (default = active)

***********
IPv6 server
***********

VyOS also provides DHCPv6 server functionality which is described in this
section.

Configuration
=============

.. cfgcmd:: set service dhcpv6-server preference <preference value>

   Clients receiving advertise messages from multiple servers choose the server
   with the highest preference value. The range for this value is ``0...255``.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> lease-time {default | maximum | minimum}

   The default lease time for DHCPv6 leases is 24 hours. This can be changed by
   supplying a ``default-time``, ``maximum-time`` and ``minimum-time``. All
   values need to be supplied in seconds.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> nis-domain <domain-name>

   A :abbr:`NIS (Network Information Service)` domain can be set to be used for
   DHCPv6 clients.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> nisplus-domain <domain-name>

   The procedure to specify a :abbr:`NIS+ (Network Information Service Plus)`
   domain is similar to the NIS domain one:

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> nis-server <address>

   Specify a NIS server address for DHCPv6 clients.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> nisplus-server <address>

   Specify a NIS+ server address for DHCPv6 clients.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> sip-server <address | fqdn>

   Specify a :abbr:`SIP (Session Initiation Protocol)` server by IPv6
   address of Fully Qualified Domain Name for all DHCPv6 clients.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> sntp-server-address <address>

   A SNTP server address can be specified for DHCPv6 clients.

Prefix Delegation
-----------------

To hand out individual prefixes to your clients the following configuration is
used:


.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> prefix-delegation start <address> prefix-length <length>

   Hand out prefixes of size `<length>` to clients in subnet `<prefix>` when
   they request for prefix delegation.

.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet
   <prefix> prefix-delegation start <address> stop <address>

   Delegate prefixes from the range indicated by the start and stop qualifier.

Address pools
-------------

DHCPv6 address pools must be configured for the system to act as a DHCPv6
server. The following example describes a common scenario.

**Example:**

* A shared network named ``NET1`` serves subnet ``2001:db8::/64``
* It is connected to ``eth1``
* DNS server is located at ``2001:db8::ffff``
* Address pool shall be ``2001:db8::100`` through ``2001:db8::199``.
* Lease time will be left at the default value which is 24 hours

.. code-block:: none

  set service dhcpv6-server shared-network-name 'NET1' subnet 2001:db8::/64 address-range start 2001:db8::100 stop 2001:db8::199
  set service dhcpv6-server shared-network-name 'NET1' subnet 2001:db8::/64 name-server 2001:db8::ffff

The configuration will look as follows:

.. code-block:: none

  show service dhcpv6-server
      shared-network-name NET1 {
          subnet 2001:db8::/64 {
             address-range {
                start 2001:db8::100 {
                   stop 2001:db8::199
                }
             }
             name-server 2001:db8::ffff
          }
      }

Static mappings
---------------

In order to map specific IPv6 addresses to specific hosts static mappings can
be created. The following example explains the process.

**Example:**

* IPv6 address ``2001:db8::101`` shall be statically mapped
* IPv6 prefix ``2001:db8:0:101::/64`` shall be statically mapped
* Host specific mapping shall be named ``client1``

.. hint:: The identifier is the device's DUID: colon-separated hex list (as
   used by isc-dhcp option dhcpv6.client-id). If the device already has a
   dynamic lease from the DHCPv6 server, its DUID can be found with ``show
   service dhcpv6 server leases``. The DUID begins at the 5th octet (after the
   4th colon) of IAID_DUID.

.. code-block:: none

  set service dhcpv6-server shared-network-name 'NET1' subnet 2001:db8::/64 static-mapping client1 ipv6-address 2001:db8::101
  set service dhcpv6-server shared-network-name 'NET1' subnet 2001:db8::/64 static-mapping client1 ipv6-prefix 2001:db8:0:101::/64
  set service dhcpv6-server shared-network-name 'NET1' subnet 2001:db8::/64 static-mapping client1 identifier 00:01:00:01:12:34:56:78:aa:bb:cc:dd:ee:ff

The configuration will look as follows:

.. stop_vyoslinter (00:01:00:01:12:34:56:78:aa:bb:cc:dd:ee:ff false positive)

.. code-block:: none

  show service dhcp-server shared-network-name NET1
     shared-network-name NET1 {
         subnet 2001:db8::/64 {
            name-server 2001:db8:111::111
            address-range {
                start 2001:db8::100 {
                   stop 2001:db8::199 {
                }
            }
            static-mapping client1 {
               ipv6-address 2001:db8::101
               identifier 00:01:00:01:12:34:56:78:aa:bb:cc:dd:ee:ff
            }
         }
      }

.. start_vyoslinter

Operation Mode
==============

.. opcmd:: restart dhcpv6 server

   To restart the DHCPv6 server

.. opcmd:: show dhcpv6 server status

   To show the current status of the DHCPv6 server.

.. opcmd:: show dhcpv6 server leases

   Show statuses of all assigned leases:

.. code-block:: none

  vyos@vyos:~$ show dhcpv6 server leases
  IPv6 address   State    Last communication    Lease expiration     Remaining    Type           Pool   IAID_DUID
  -------------  -------  --------------------  -------------------  -----------  -------------  -----  --------------------------------------------
  2001:db8::101  active   2019/12/05 19:40:10   2019/12/06 07:40:10  11:45:21     non-temporary  NET1   98:76:54:32:00:01:00:01:12:34:56:78:aa:bb:cc:dd:ee:ff
  2001:db8::102  active   2019/12/05 14:01:23   2019/12/06 02:01:23  6:06:34      non-temporary  NET1   87:65:43:21:00:01:00:01:11:22:33:44:fa:fb:fc:fd:fe:ff

.. hint:: Static mappings aren't shown. To show all states, use ``show dhcp
   server leases state all``.

.. opcmd:: show dhcpv6 server leases pool <pool>

   Show only leases in the specified pool.

.. opcmd:: show dhcpv6 server leases sort <key>

   Sort the output by the specified key. Possible keys: expires, iaid_duid, ip,
   last_comm, pool, remaining, state, type (default = ip)

.. opcmd:: show dhcpv6 server leases state <state>

   Show only leases with the specified state. Possible states: abandoned,
   active, all, backup, expired, free, released, reset (default = active)