1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
PPPoE server
------------
VyOS utilizes `accel-ppp`_ to provide PPPoE server functionality. It can be
used with local authentication or a connected RADIUS server.
.. note:: **Please be aware, due to an upstream bug, config changes/commits
will restart the ppp daemon and will reset existing PPPoE connections from
connected users, in order to become effective.**
Configuration
^^^^^^^^^^^^^
The example below uses ACN as access-concentrator name, assigns an address
from the pool 10.1.1.100-111, terminates at the local endpoint 10.1.1.1 and
serves requests only on eth1.
.. code-block:: sh
set service pppoe-server access-concentrator 'ACN'
set service pppoe-server authentication local-users username foo password 'bar'
set service pppoe-server authentication mode 'local'
set service pppoe-server client-ip-pool start '10.1.1.100'
set service pppoe-server client-ip-pool stop '10.1.1.111'
set service pppoe-server dns-servers server-1 '10.100.100.1'
set service pppoe-server dns-servers server-2 '10.100.200.1'
set service pppoe-server interface 'eth1'
set service pppoe-server local-ip '10.1.1.2'
Connections can be locally checked via the command
.. code-block:: sh
show pppoe-server sessions
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
Client IP address pools
=======================
To automatically assign the client an IP address as tunnel endpoint, a client IP pool is needed. The source can be either RADIUS or a local suhbnet or IP range defintion.
Once the local tunnel endpoint ``set service pppoe-server local-ip '10.1.1.2'`` has been defined, the client IP pool can be either defined as a range or as subnet using CIDR notation.
If the CIDR notation is used, multiple subnets can be setup which are used sequentially.
**Client IP address via IP range defintion**
.. code-block:: sh
set service pppoe-server client-ip-pool start '10.1.1.100'
set service pppoe-server client-ip-pool stop '10.1.1.111'
**Client IP subnets via CIDR notation**
.. code-block:: sh
set service pppoe-server client-ip-pool subnet '10.1.1.0/24'
set service pppoe-server client-ip-pool subnet '10.1.2.0/24'
set service pppoe-server client-ip-pool subnet '10.1.3.0/24'
**RADIUS based IP pools (Framed-IP-Address)**
To use a radius server, you need to switch to authentication mode radius and
of course need to specify an IP for the server. You can have multiple RADIUS
server configured, if you wish to achieve redundancy.
.. code-block:: sh
set service pppoe-server access-concentrator 'ACN'
set service pppoe-server authentication mode 'radius'
set service pppoe-server authentication radius-server 10.1.100.1 secret 'secret'
set service pppoe-server interface 'eth1'
set service pppoe-server local-ip '10.1.1.2'
RADIUS provides the IP addresses in the example above via Framed-IP-Address.
**RADIUS sessions management DM/CoA**
For remotely disconnect sessions and change some authentication parameters you can configure dae-server
.. code-block:: sh
set service pppoe-server authentication radius-settings dae-server ip-address '10.1.1.2'
set service pppoe-server authentication radius-settings dae-server port '3799'
set service pppoe-server authentication radius-settings dae-server secret 'secret123'
Example, from radius-server send command for disconnect client with username test
.. code-block:: sh
root@radius-server:~# echo "User-Name=test" | radclient -x 10.1.1.2:3799 disconnect secret123
You can also use another attributes for identify client for disconnect, like Framed-IP-Address, Acct-Session-Id, etc.
Result commands appears in log
.. code-block:: sh
show log | match Disconnect*
Example for changing rate-limit via RADIUS CoA
.. code-block:: sh
echo "User-Name=test,Filter-Id=5000/4000" | radclient 10.1.1.2:3799 coa secret123
Filter-Id=5000/4000 (means 5000Kbit down-stream rate and 4000Kbit up-stream rate)
If attribute Filter-Id redefined, replace it in radius coa request
Bandwidth Shaping
^^^^^^^^^^^^^^^^^
Bandwidth rate limits can be set for local users or RADIUS based attributes.
Bandwidth Shaping for local users
=================================
The rate-limit is set in kbit/sec.
.. code-block:: sh
set service pppoe-server access-concentrator 'ACN'
set service pppoe-server authentication local-users username foo password 'bar'
set service pppoe-server authentication local-users username foo rate-limit download '20480'
set service pppoe-server authentication local-users username foo rate-limit upload '10240'
set service pppoe-server authentication mode 'local'
set service pppoe-server client-ip-pool start '10.1.1.100'
set service pppoe-server client-ip-pool stop '10.1.1.111'
set service pppoe-server dns-servers server-1 '10.100.100.1'
set service pppoe-server dns-servers server-2 '10.100.200.1'
set service pppoe-server interface 'eth1'
set service pppoe-server local-ip '10.1.1.2'
Once the user is connected, the user session is using the set limits and can be displayed via 'show pppoe-server sessions'.
.. code-block:: sh
show pppoe-server sessions
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
RADIUS based shaper setup
=========================
The current attribute 'Filter-Id' is being used as default and can be setup within RADIUS:
Filter-Id=2000/3000 (means 2000Kbit down-stream rate and 3000Kbit up-stream rate)
The command below enables it, assuming the RADIUS connection has been setup and is working.
.. code-block:: sh
set service pppoe-server authentication radius-settings rate-limit enable
Other attributes can be used, but they have to be in one of the dictionaries in /usr/share/accel-ppp/radius.
Practical Configuration Examples
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Dual-stack provisioning with IPv6 PD via pppoe
==============================================
The example below covers a dual-stack configuration via pppoe-server.
.. code-block:: sh
set service pppoe-server authentication local-users username test password 'test'
set service pppoe-server authentication mode 'local'
set service pppoe-server client-ip-pool start '192.168.0.1'
set service pppoe-server client-ip-pool stop '192.168.0.10'
set service pppoe-server client-ipv6-pool delegate-prefix '2001:db8:8003::1/48,56'
set service pppoe-server client-ipv6-pool prefix '2001:db8:8002::1/48,64'
set service pppoe-server dns-servers server-1 '8.8.8.8'
set service pppoe-server dnsv6-servers server-1 '2001:4860:4860::8888'
set service pppoe-server interface 'eth2'
set service pppoe-server local-ip '10.100.100.1'
The client, once successfully authenticated, will receive an IPv4 and an IPv6 /64 address, to terminate the pppoe endpoint on the client side and a /56 subnet for the clients internal use.
.. code-block:: sh
vyos@pppoe-server:~$ sh pppoe-server sessions
ifname | username | ip | ip6 | ip6-dp | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
--------+----------+-------------+--------------------------+---------------------+-------------------+------------+--------+----------+----------+----------
ppp0 | test | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 08:00:27:12:42:eb | | active | 00:00:49 | 875 B | 2.1 KiB
.. _`accel-ppp`: https://accel-ppp.org/
|
