diff options
Diffstat (limited to 'Cryptlib/OpenSSL/crypto/sha')
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha1_one.c | 63 | ||||
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha1dgst.c | 69 | ||||
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha256.c | 119 | ||||
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha512.c | 198 | ||||
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha_dgst.c | 74 | ||||
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha_locl.h | 118 | ||||
| -rw-r--r-- | Cryptlib/OpenSSL/crypto/sha/sha_one.c | 79 |
7 files changed, 188 insertions, 532 deletions
diff --git a/Cryptlib/OpenSSL/crypto/sha/sha1_one.c b/Cryptlib/OpenSSL/crypto/sha/sha1_one.c index a6dd760a..273ab08d 100644 --- a/Cryptlib/OpenSSL/crypto/sha/sha1_one.c +++ b/Cryptlib/OpenSSL/crypto/sha/sha1_one.c @@ -1,59 +1,10 @@ -/* crypto/sha/sha1_one.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. +/* + * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html */ #include <stdio.h> @@ -61,7 +12,6 @@ #include <openssl/crypto.h> #include <openssl/sha.h> -#ifndef OPENSSL_NO_SHA1 unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md) { SHA_CTX c; @@ -76,4 +26,3 @@ unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md) OPENSSL_cleanse(&c, sizeof(c)); return (md); } -#endif diff --git a/Cryptlib/OpenSSL/crypto/sha/sha1dgst.c b/Cryptlib/OpenSSL/crypto/sha/sha1dgst.c index a67f1fe3..819370e6 100644 --- a/Cryptlib/OpenSSL/crypto/sha/sha1dgst.c +++ b/Cryptlib/OpenSSL/crypto/sha/sha1dgst.c @@ -1,74 +1,17 @@ -/* crypto/sha/sha1dgst.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. +/* + * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html */ #include <openssl/crypto.h> #include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA1) && !defined(OPENSSL_NO_SHA) - -# undef SHA_0 -# define SHA_1 # include <openssl/opensslv.h> -const char SHA1_version[] = "SHA1" OPENSSL_VERSION_PTEXT; - /* The implementation is in ../md32_common.h */ # include "sha_locl.h" - -#endif diff --git a/Cryptlib/OpenSSL/crypto/sha/sha256.c b/Cryptlib/OpenSSL/crypto/sha/sha256.c index 72a11593..5e7ba439 100644 --- a/Cryptlib/OpenSSL/crypto/sha/sha256.c +++ b/Cryptlib/OpenSSL/crypto/sha/sha256.c @@ -1,22 +1,22 @@ -/* crypto/sha/sha256.c */ -/* ==================================================================== - * Copyright (c) 2004 The OpenSSL Project. All rights reserved - * according to the OpenSSL license [found in ../../LICENSE]. - * ==================================================================== +/* + * Copyright 2004-2016 The OpenSSL Project Authors. All Rights Reserved. + * + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html */ -#include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA256) -# include <stdlib.h> -# include <string.h> +#include <openssl/opensslconf.h> -# include <openssl/crypto.h> -# include <openssl/sha.h> -# include <openssl/opensslv.h> +#include <stdlib.h> +#include <string.h> -const char SHA256_version[] = "SHA-256" OPENSSL_VERSION_PTEXT; +#include <openssl/crypto.h> +#include <openssl/sha.h> +#include <openssl/opensslv.h> -fips_md_init_ctx(SHA224, SHA256) +int SHA224_Init(SHA256_CTX *c) { memset(c, 0, sizeof(*c)); c->h[0] = 0xc1059ed8UL; @@ -31,7 +31,7 @@ fips_md_init_ctx(SHA224, SHA256) return 1; } -fips_md_init(SHA256) +int SHA256_Init(SHA256_CTX *c) { memset(c, 0, sizeof(*c)); c->h[0] = 0x6a09e667UL; @@ -84,20 +84,21 @@ int SHA224_Final(unsigned char *md, SHA256_CTX *c) return SHA256_Final(md, c); } -# define DATA_ORDER_IS_BIG_ENDIAN +#define DATA_ORDER_IS_BIG_ENDIAN + +#define HASH_LONG SHA_LONG +#define HASH_CTX SHA256_CTX +#define HASH_CBLOCK SHA_CBLOCK -# define HASH_LONG SHA_LONG -# define HASH_CTX SHA256_CTX -# define HASH_CBLOCK SHA_CBLOCK /* * Note that FIPS180-2 discusses "Truncation of the Hash Function Output." * default: case below covers for it. It's not clear however if it's * permitted to truncate to amount of bytes not divisible by 4. I bet not, * but if it is, then default: case shall be extended. For reference. - * Idea behind separate cases for pre-defined lenghts is to let the + * Idea behind separate cases for pre-defined lengths is to let the * compiler decide if it's appropriate to unroll small loops. */ -# define HASH_MAKE_STRING(c,s) do { \ +#define HASH_MAKE_STRING(c,s) do { \ unsigned long ll; \ unsigned int nn; \ switch ((c)->md_len) \ @@ -118,18 +119,18 @@ int SHA224_Final(unsigned char *md, SHA256_CTX *c) } \ } while (0) -# define HASH_UPDATE SHA256_Update -# define HASH_TRANSFORM SHA256_Transform -# define HASH_FINAL SHA256_Final -# define HASH_BLOCK_DATA_ORDER sha256_block_data_order -# ifndef SHA256_ASM +#define HASH_UPDATE SHA256_Update +#define HASH_TRANSFORM SHA256_Transform +#define HASH_FINAL SHA256_Final +#define HASH_BLOCK_DATA_ORDER sha256_block_data_order +#ifndef SHA256_ASM static -# endif +#endif void sha256_block_data_order(SHA256_CTX *ctx, const void *in, size_t num); -# include "md32_common.h" +#include "internal/md32_common.h" -# ifndef SHA256_ASM +#ifndef SHA256_ASM static const SHA_LONG K256[64] = { 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, 0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, @@ -154,15 +155,15 @@ static const SHA_LONG K256[64] = { * is left one. This is why you might notice that rotation coefficients * differ from those observed in FIPS document by 32-N... */ -# define Sigma0(x) (ROTATE((x),30) ^ ROTATE((x),19) ^ ROTATE((x),10)) -# define Sigma1(x) (ROTATE((x),26) ^ ROTATE((x),21) ^ ROTATE((x),7)) -# define sigma0(x) (ROTATE((x),25) ^ ROTATE((x),14) ^ ((x)>>3)) -# define sigma1(x) (ROTATE((x),15) ^ ROTATE((x),13) ^ ((x)>>10)) +# define Sigma0(x) (ROTATE((x),30) ^ ROTATE((x),19) ^ ROTATE((x),10)) +# define Sigma1(x) (ROTATE((x),26) ^ ROTATE((x),21) ^ ROTATE((x),7)) +# define sigma0(x) (ROTATE((x),25) ^ ROTATE((x),14) ^ ((x)>>3)) +# define sigma1(x) (ROTATE((x),15) ^ ROTATE((x),13) ^ ((x)>>10)) -# define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) -# define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) +# define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +# define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) -# ifdef OPENSSL_SMALL_FOOTPRINT +# ifdef OPENSSL_SMALL_FOOTPRINT static void sha256_block_data_order(SHA256_CTX *ctx, const void *in, size_t num) @@ -184,7 +185,7 @@ static void sha256_block_data_order(SHA256_CTX *ctx, const void *in, h = ctx->h[7]; for (i = 0; i < 16; i++) { - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[i] = l; T1 += h + Sigma1(e) + Ch(e, f, g) + K256[i]; T2 = Sigma0(a) + Maj(a, b, c); @@ -229,14 +230,14 @@ static void sha256_block_data_order(SHA256_CTX *ctx, const void *in, } } -# else +# else -# define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ +# define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i]; \ h = Sigma0(a) + Maj(a,b,c); \ d += T1; h += T1; } while (0) -# define ROUND_16_63(i,a,b,c,d,e,f,g,h,X) do { \ +# define ROUND_16_63(i,a,b,c,d,e,f,g,h,X) do { \ s0 = X[(i+1)&0x0f]; s0 = sigma0(s0); \ s1 = X[(i+14)&0x0f]; s1 = sigma1(s1); \ T1 = X[(i)&0x0f] += s0 + s1 + X[(i+9)&0x0f]; \ @@ -308,52 +309,52 @@ static void sha256_block_data_order(SHA256_CTX *ctx, const void *in, } else { SHA_LONG l; - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[0] = l; ROUND_00_15(0, a, b, c, d, e, f, g, h); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[1] = l; ROUND_00_15(1, h, a, b, c, d, e, f, g); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[2] = l; ROUND_00_15(2, g, h, a, b, c, d, e, f); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[3] = l; ROUND_00_15(3, f, g, h, a, b, c, d, e); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[4] = l; ROUND_00_15(4, e, f, g, h, a, b, c, d); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[5] = l; ROUND_00_15(5, d, e, f, g, h, a, b, c); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[6] = l; ROUND_00_15(6, c, d, e, f, g, h, a, b); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[7] = l; ROUND_00_15(7, b, c, d, e, f, g, h, a); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[8] = l; ROUND_00_15(8, a, b, c, d, e, f, g, h); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[9] = l; ROUND_00_15(9, h, a, b, c, d, e, f, g); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[10] = l; ROUND_00_15(10, g, h, a, b, c, d, e, f); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[11] = l; ROUND_00_15(11, f, g, h, a, b, c, d, e); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[12] = l; ROUND_00_15(12, e, f, g, h, a, b, c, d); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[13] = l; ROUND_00_15(13, d, e, f, g, h, a, b, c); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[14] = l; ROUND_00_15(14, c, d, e, f, g, h, a, b); - HOST_c2l(data, l); + (void)HOST_c2l(data, l); T1 = X[15] = l; ROUND_00_15(15, b, c, d, e, f, g, h, a); } @@ -381,7 +382,5 @@ static void sha256_block_data_order(SHA256_CTX *ctx, const void *in, } } -# endif -# endif /* SHA256_ASM */ - -#endif /* OPENSSL_NO_SHA256 */ +# endif +#endif /* SHA256_ASM */ diff --git a/Cryptlib/OpenSSL/crypto/sha/sha512.c b/Cryptlib/OpenSSL/crypto/sha/sha512.c index 3bf66ae1..d24d1034 100644 --- a/Cryptlib/OpenSSL/crypto/sha/sha512.c +++ b/Cryptlib/OpenSSL/crypto/sha/sha512.c @@ -1,17 +1,19 @@ -/* crypto/sha/sha512.c */ -/* ==================================================================== - * Copyright (c) 2004 The OpenSSL Project. All rights reserved - * according to the OpenSSL license [found in ../../LICENSE]. - * ==================================================================== +/* + * Copyright 2004-2016 The OpenSSL Project Authors. All Rights Reserved. + * + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html */ + #include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA512) /*- * IMPLEMENTATION NOTES. * * As you might have noticed 32-bit hash algorithms: * - * - permit SHA_LONG to be wider than 32-bit (case on CRAY); + * - permit SHA_LONG to be wider than 32-bit * - optimized versions implement two transform functions: one operating * on [aligned] data in host byte order and one - on data in input * stream byte order; @@ -41,26 +43,24 @@ * 16-bit platforms. * <appro@fy.chalmers.se> */ -# include <stdlib.h> -# include <string.h> +#include <stdlib.h> +#include <string.h> -# include <openssl/crypto.h> -# include <openssl/sha.h> -# include <openssl/opensslv.h> +#include <openssl/crypto.h> +#include <openssl/sha.h> +#include <openssl/opensslv.h> -# include "cryptlib.h" +#include "internal/cryptlib.h" -const char SHA512_version[] = "SHA-512" OPENSSL_VERSION_PTEXT; - -# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || \ +#if defined(__i386) || defined(__i386__) || defined(_M_IX86) || \ defined(__x86_64) || defined(_M_AMD64) || defined(_M_X64) || \ defined(__s390__) || defined(__s390x__) || \ defined(__aarch64__) || \ defined(SHA512_ASM) -# define SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA -# endif +# define SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA +#endif -fips_md_init_ctx(SHA384, SHA512) +int SHA384_Init(SHA512_CTX *c) { c->h[0] = U64(0xcbbb9d5dc1059ed8); c->h[1] = U64(0x629a292a367cd507); @@ -78,7 +78,7 @@ fips_md_init_ctx(SHA384, SHA512) return 1; } -fips_md_init(SHA512) +int SHA512_Init(SHA512_CTX *c) { c->h[0] = U64(0x6a09e667f3bcc908); c->h[1] = U64(0xbb67ae8584caa73b); @@ -96,9 +96,9 @@ fips_md_init(SHA512) return 1; } -# ifndef SHA512_ASM +#ifndef SHA512_ASM static -# endif +#endif void sha512_block_data_order(SHA512_CTX *ctx, const void *in, size_t num); int SHA512_Final(unsigned char *md, SHA512_CTX *c) @@ -108,15 +108,17 @@ int SHA512_Final(unsigned char *md, SHA512_CTX *c) p[n] = 0x80; /* There always is a room for one */ n++; - if (n > (sizeof(c->u) - 16)) - memset(p + n, 0, sizeof(c->u) - n), n = 0, - sha512_block_data_order(c, p, 1); + if (n > (sizeof(c->u) - 16)) { + memset(p + n, 0, sizeof(c->u) - n); + n = 0; + sha512_block_data_order(c, p, 1); + } memset(p + n, 0, sizeof(c->u) - 16 - n); -# ifdef B_ENDIAN +#ifdef B_ENDIAN c->u.d[SHA_LBLOCK - 2] = c->Nh; c->u.d[SHA_LBLOCK - 1] = c->Nl; -# else +#else p[sizeof(c->u) - 1] = (unsigned char)(c->Nl); p[sizeof(c->u) - 2] = (unsigned char)(c->Nl >> 8); p[sizeof(c->u) - 3] = (unsigned char)(c->Nl >> 16); @@ -133,7 +135,7 @@ int SHA512_Final(unsigned char *md, SHA512_CTX *c) p[sizeof(c->u) - 14] = (unsigned char)(c->Nh >> 40); p[sizeof(c->u) - 15] = (unsigned char)(c->Nh >> 48); p[sizeof(c->u) - 16] = (unsigned char)(c->Nh >> 56); -# endif +#endif sha512_block_data_order(c, p, 1); @@ -213,14 +215,14 @@ int SHA512_Update(SHA512_CTX *c, const void *_data, size_t len) } if (len >= sizeof(c->u)) { -# ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA +#ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA if ((size_t)data % sizeof(c->u.d[0]) != 0) while (len >= sizeof(c->u)) memcpy(p, data, sizeof(c->u)), sha512_block_data_order(c, p, 1), len -= sizeof(c->u), data += sizeof(c->u); else -# endif +#endif sha512_block_data_order(c, data, len / sizeof(c->u)), data += len, len %= sizeof(c->u), data -= len; } @@ -238,10 +240,10 @@ int SHA384_Update(SHA512_CTX *c, const void *data, size_t len) void SHA512_Transform(SHA512_CTX *c, const unsigned char *data) { -# ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA +#ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA if ((size_t)data % sizeof(c->u.d[0]) != 0) memcpy(c->u.p, data, sizeof(c->u.p)), data = c->u.p; -# endif +#endif sha512_block_data_order(c, data, 1); } @@ -273,7 +275,7 @@ unsigned char *SHA512(const unsigned char *d, size_t n, unsigned char *md) return (md); } -# ifndef SHA512_ASM +#ifndef SHA512_ASM static const SHA_LONG64 K512[80] = { U64(0x428a2f98d728ae22), U64(0x7137449123ef65cd), U64(0xb5c0fbcfec4d3b2f), U64(0xe9b5dba58189dbbc), @@ -317,23 +319,23 @@ static const SHA_LONG64 K512[80] = { U64(0x5fcb6fab3ad6faec), U64(0x6c44198c4a475817) }; -# ifndef PEDANTIC -# if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) -# if defined(__x86_64) || defined(__x86_64__) -# define ROTR(a,n) ({ SHA_LONG64 ret; \ +# ifndef PEDANTIC +# if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) +# if defined(__x86_64) || defined(__x86_64__) +# define ROTR(a,n) ({ SHA_LONG64 ret; \ asm ("rorq %1,%0" \ : "=r"(ret) \ : "J"(n),"0"(a) \ : "cc"); ret; }) -# if !defined(B_ENDIAN) -# define PULL64(x) ({ SHA_LONG64 ret=*((const SHA_LONG64 *)(&(x))); \ +# if !defined(B_ENDIAN) +# define PULL64(x) ({ SHA_LONG64 ret=*((const SHA_LONG64 *)(&(x))); \ asm ("bswapq %0" \ : "=r"(ret) \ : "0"(ret)); ret; }) -# endif -# elif (defined(__i386) || defined(__i386__)) && !defined(B_ENDIAN) -# if defined(I386_ONLY) -# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ +# endif +# elif (defined(__i386) || defined(__i386__)) && !defined(B_ENDIAN) +# if defined(I386_ONLY) +# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ unsigned int hi=p[0],lo=p[1]; \ asm("xchgb %%ah,%%al;xchgb %%dh,%%dl;"\ "roll $16,%%eax; roll $16,%%edx; "\ @@ -341,39 +343,39 @@ static const SHA_LONG64 K512[80] = { : "=a"(lo),"=d"(hi) \ : "0"(lo),"1"(hi) : "cc"); \ ((SHA_LONG64)hi)<<32|lo; }) -# else -# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ +# else +# define PULL64(x) ({ const unsigned int *p=(const unsigned int *)(&(x));\ unsigned int hi=p[0],lo=p[1]; \ asm ("bswapl %0; bswapl %1;" \ : "=r"(lo),"=r"(hi) \ : "0"(lo),"1"(hi)); \ ((SHA_LONG64)hi)<<32|lo; }) -# endif -# elif (defined(_ARCH_PPC) && defined(__64BIT__)) || defined(_ARCH_PPC64) -# define ROTR(a,n) ({ SHA_LONG64 ret; \ +# endif +# elif (defined(_ARCH_PPC) && defined(__64BIT__)) || defined(_ARCH_PPC64) +# define ROTR(a,n) ({ SHA_LONG64 ret; \ asm ("rotrdi %0,%1,%2" \ : "=r"(ret) \ : "r"(a),"K"(n)); ret; }) -# elif defined(__aarch64__) -# define ROTR(a,n) ({ SHA_LONG64 ret; \ +# elif defined(__aarch64__) +# define ROTR(a,n) ({ SHA_LONG64 ret; \ asm ("ror %0,%1,%2" \ : "=r"(ret) \ : "r"(a),"I"(n)); ret; }) -# if defined(__BYTE_ORDER__) && defined(__ORDER_LITTLE_ENDIAN__) && \ +# if defined(__BYTE_ORDER__) && defined(__ORDER_LITTLE_ENDIAN__) && \ __BYTE_ORDER__==__ORDER_LITTLE_ENDIAN__ -# define PULL64(x) ({ SHA_LONG64 ret; \ +# define PULL64(x) ({ SHA_LONG64 ret; \ asm ("rev %0,%1" \ : "=r"(ret) \ : "r"(*((const SHA_LONG64 *)(&(x))))); ret; }) -# endif -# endif -# elif defined(_MSC_VER) -# if defined(_WIN64) /* applies to both IA-64 and AMD64 */ -# pragma intrinsic(_rotr64) -# define ROTR(a,n) _rotr64((a),n) # endif -# if defined(_M_IX86) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) -# if defined(I386_ONLY) +# endif +# elif defined(_MSC_VER) +# if defined(_WIN64) /* applies to both IA-64 and AMD64 */ +# pragma intrinsic(_rotr64) +# define ROTR(a,n) _rotr64((a),n) +# endif +# if defined(_M_IX86) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) +# if defined(I386_ONLY) static SHA_LONG64 __fastcall __pull64be(const void *x) { _asm mov edx,[ecx + 0] @@ -381,34 +383,34 @@ static SHA_LONG64 __fastcall __pull64be(const void *x) _asm xchg dh, dl _asm xchg ah, al _asm rol edx, 16 _asm rol eax, 16 _asm xchg dh, dl _asm xchg ah, al} -# else +# else static SHA_LONG64 __fastcall __pull64be(const void *x) { _asm mov edx,[ecx + 0] _asm mov eax,[ecx + 4] _asm bswap edx _asm bswap eax} -# endif -# define PULL64(x) __pull64be(&(x)) -# if _MSC_VER<=1200 -# pragma inline_depth(0) -# endif +# endif +# define PULL64(x) __pull64be(&(x)) +# if _MSC_VER<=1200 +# pragma inline_depth(0) # endif # endif # endif -# ifndef PULL64 -# define B(x,j) (((SHA_LONG64)(*(((const unsigned char *)(&x))+j)))<<((7-j)*8)) -# define PULL64(x) (B(x,0)|B(x,1)|B(x,2)|B(x,3)|B(x,4)|B(x,5)|B(x,6)|B(x,7)) -# endif -# ifndef ROTR -# define ROTR(x,s) (((x)>>s) | (x)<<(64-s)) -# endif -# define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) -# define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) -# define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) -# define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) -# define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) -# define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) -# if defined(__i386) || defined(__i386__) || defined(_M_IX86) +# endif +# ifndef PULL64 +# define B(x,j) (((SHA_LONG64)(*(((const unsigned char *)(&x))+j)))<<((7-j)*8)) +# define PULL64(x) (B(x,0)|B(x,1)|B(x,2)|B(x,3)|B(x,4)|B(x,5)|B(x,6)|B(x,7)) +# endif +# ifndef ROTR +# define ROTR(x,s) (((x)>>s) | (x)<<(64-s)) +# endif +# define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) +# define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) +# define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) +# define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) +# define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +# define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) +# if defined(__i386) || defined(__i386__) || defined(_M_IX86) /* * This code should give better results on 32-bit CPU with less than * ~24 registers, both size and performance wise... @@ -433,11 +435,11 @@ _asm bswap edx _asm bswap eax} F[7] = ctx->h[7]; for (i = 0; i < 16; i++, F--) { -# ifdef B_ENDIAN +# ifdef B_ENDIAN T = W[i]; -# else +# else T = PULL64(W[i]); -# endif +# endif F[0] = A; F[4] = E; F[8] = T; @@ -472,7 +474,7 @@ _asm bswap edx _asm bswap eax} } } -# elif defined(OPENSSL_SMALL_FOOTPRINT) +# elif defined(OPENSSL_SMALL_FOOTPRINT) static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, size_t num) { @@ -493,11 +495,11 @@ static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, h = ctx->h[7]; for (i = 0; i < 16; i++) { -# ifdef B_ENDIAN +# ifdef B_ENDIAN T1 = X[i] = W[i]; -# else +# else T1 = X[i] = PULL64(W[i]); -# endif +# endif T1 += h + Sigma1(e) + Ch(e, f, g) + K512[i]; T2 = Sigma0(a) + Maj(a, b, c); h = g; @@ -542,12 +544,12 @@ static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, } } -# else -# define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ +# else +# define ROUND_00_15(i,a,b,c,d,e,f,g,h) do { \ T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i]; \ h = Sigma0(a) + Maj(a,b,c); \ d += T1; h += T1; } while (0) -# define ROUND_16_80(i,j,a,b,c,d,e,f,g,h,X) do { \ +# define ROUND_16_80(i,j,a,b,c,d,e,f,g,h,X) do { \ s0 = X[(j+1)&0x0f]; s0 = sigma0(s0); \ s1 = X[(j+14)&0x0f]; s1 = sigma1(s1); \ T1 = X[(j)&0x0f] += s0 + s1 + X[(j+9)&0x0f]; \ @@ -571,7 +573,7 @@ static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, g = ctx->h[6]; h = ctx->h[7]; -# ifdef B_ENDIAN +# ifdef B_ENDIAN T1 = X[0] = W[0]; ROUND_00_15(0, a, b, c, d, e, f, g, h); T1 = X[1] = W[1]; @@ -604,7 +606,7 @@ static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, ROUND_00_15(14, c, d, e, f, g, h, a, b); T1 = X[15] = W[15]; ROUND_00_15(15, b, c, d, e, f, g, h, a); -# else +# else T1 = X[0] = PULL64(W[0]); ROUND_00_15(0, a, b, c, d, e, f, g, h); T1 = X[1] = PULL64(W[1]); @@ -637,7 +639,7 @@ static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, ROUND_00_15(14, c, d, e, f, g, h, a, b); T1 = X[15] = PULL64(W[15]); ROUND_00_15(15, b, c, d, e, f, g, h, a); -# endif +# endif for (i = 16; i < 80; i += 16) { ROUND_16_80(i, 0, a, b, c, d, e, f, g, h, X); @@ -671,14 +673,6 @@ static void sha512_block_data_order(SHA512_CTX *ctx, const void *in, } } -# endif - -# endif /* SHA512_ASM */ - -#else /* !OPENSSL_NO_SHA512 */ - -# if defined(PEDANTIC) || defined(__DECC) || defined(OPENSSL_SYS_MACOSX) -static void *dummy = &dummy; # endif -#endif /* !OPENSSL_NO_SHA512 */ +#endif /* SHA512_ASM */ diff --git a/Cryptlib/OpenSSL/crypto/sha/sha_dgst.c b/Cryptlib/OpenSSL/crypto/sha/sha_dgst.c deleted file mode 100644 index f77cf5e3..00000000 --- a/Cryptlib/OpenSSL/crypto/sha/sha_dgst.c +++ /dev/null @@ -1,74 +0,0 @@ -/* crypto/sha/sha1dgst.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <openssl/crypto.h> -#include <openssl/opensslconf.h> -#if !defined(OPENSSL_NO_SHA0) && !defined(OPENSSL_NO_SHA) - -# undef SHA_1 -# define SHA_0 - -# include <openssl/opensslv.h> - -const char SHA_version[] = "SHA" OPENSSL_VERSION_PTEXT; - -/* The implementation is in ../md32_common.h */ - -# include "sha_locl.h" - -#endif diff --git a/Cryptlib/OpenSSL/crypto/sha/sha_locl.h b/Cryptlib/OpenSSL/crypto/sha/sha_locl.h index 03bd411e..918278a8 100644 --- a/Cryptlib/OpenSSL/crypto/sha/sha_locl.h +++ b/Cryptlib/OpenSSL/crypto/sha/sha_locl.h @@ -1,59 +1,10 @@ -/* crypto/sha/sha_locl.h */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. +/* + * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html */ #include <stdlib.h> @@ -76,45 +27,22 @@ ll=(c)->h4; (void)HOST_l2c(ll,(s)); \ } while (0) -#if defined(SHA_0) - -# define HASH_UPDATE SHA_Update -# define HASH_TRANSFORM SHA_Transform -# define HASH_FINAL SHA_Final -# define HASH_INIT SHA_Init -# define HASH_BLOCK_DATA_ORDER sha_block_data_order -# define Xupdate(a,ix,ia,ib,ic,id) (ix=(a)=(ia^ib^ic^id)) - -static void sha_block_data_order(SHA_CTX *c, const void *p, size_t num); - -#elif defined(SHA_1) - -# define HASH_UPDATE SHA1_Update -# define HASH_TRANSFORM SHA1_Transform -# define HASH_FINAL SHA1_Final -# define HASH_INIT SHA1_Init -# define HASH_BLOCK_DATA_ORDER sha1_block_data_order -# if defined(__MWERKS__) && defined(__MC68K__) - /* Metrowerks for Motorola fails otherwise:-( <appro@fy.chalmers.se> */ -# define Xupdate(a,ix,ia,ib,ic,id) do { (a)=(ia^ib^ic^id); \ - ix=(a)=ROTATE((a),1); \ - } while (0) -# else -# define Xupdate(a,ix,ia,ib,ic,id) ( (a)=(ia^ib^ic^id), \ +#define HASH_UPDATE SHA1_Update +#define HASH_TRANSFORM SHA1_Transform +#define HASH_FINAL SHA1_Final +#define HASH_INIT SHA1_Init +#define HASH_BLOCK_DATA_ORDER sha1_block_data_order +#define Xupdate(a,ix,ia,ib,ic,id) ( (a)=(ia^ib^ic^id), \ ix=(a)=ROTATE((a),1) \ ) -# endif - -# ifndef SHA1_ASM -static -# endif -void sha1_block_data_order(SHA_CTX *c, const void *p, size_t num); +#ifndef SHA1_ASM +static void sha1_block_data_order(SHA_CTX *c, const void *p, size_t num); #else -# error "Either SHA_0 or SHA_1 must be defined." +void sha1_block_data_order(SHA_CTX *c, const void *p, size_t num); #endif -#include "md32_common.h" +#include "internal/md32_common.h" #define INIT_DATA_h0 0x67452301UL #define INIT_DATA_h1 0xefcdab89UL @@ -122,11 +50,7 @@ void sha1_block_data_order(SHA_CTX *c, const void *p, size_t num); #define INIT_DATA_h3 0x10325476UL #define INIT_DATA_h4 0xc3d2e1f0UL -#ifdef SHA_0 -fips_md_init(SHA) -#else -fips_md_init_ctx(SHA1, SHA) -#endif +int HASH_INIT(SHA_CTX *c) { memset(c, 0, sizeof(*c)); c->h0 = INIT_DATA_h0; @@ -191,7 +115,7 @@ fips_md_init_ctx(SHA1, SHA) # ifndef MD32_XARRAY /* * Originally X was an array. As it's automatic it's natural - * to expect RISC compiler to accomodate at least part of it in + * to expect RISC compiler to accommodate at least part of it in * the register bank, isn't it? Unfortunately not all compilers * "find" this expectation reasonable:-( On order to make such * compilers generate better code I replace X[] with a bunch of @@ -208,7 +132,7 @@ fips_md_init_ctx(SHA1, SHA) # define X(i) XX[i] # endif -# if !defined(SHA_1) || !defined(SHA1_ASM) +# if !defined(SHA1_ASM) static void HASH_BLOCK_DATA_ORDER(SHA_CTX *c, const void *p, size_t num) { const unsigned char *data = p; @@ -442,7 +366,7 @@ static void HASH_BLOCK_DATA_ORDER(SHA_CTX *c, const void *p, size_t num) E=D, D=C, C=ROTATE(B,30), B=A; \ A=ROTATE(A,5)+T+xa; } while(0) -# if !defined(SHA_1) || !defined(SHA1_ASM) +# if !defined(SHA1_ASM) static void HASH_BLOCK_DATA_ORDER(SHA_CTX *c, const void *p, size_t num) { const unsigned char *data = p; @@ -458,7 +382,7 @@ static void HASH_BLOCK_DATA_ORDER(SHA_CTX *c, const void *p, size_t num) for (;;) { for (i = 0; i < 16; i++) { - HOST_c2l(data, l); + (void)HOST_c2l(data, l); X[i] = l; BODY_00_15(X[i]); } diff --git a/Cryptlib/OpenSSL/crypto/sha/sha_one.c b/Cryptlib/OpenSSL/crypto/sha/sha_one.c deleted file mode 100644 index 0930b98a..00000000 --- a/Cryptlib/OpenSSL/crypto/sha/sha_one.c +++ /dev/null @@ -1,79 +0,0 @@ -/* crypto/sha/sha_one.c */ -/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) - * All rights reserved. - * - * This package is an SSL implementation written - * by Eric Young (eay@cryptsoft.com). - * The implementation was written so as to conform with Netscapes SSL. - * - * This library is free for commercial and non-commercial use as long as - * the following conditions are aheared to. The following conditions - * apply to all code found in this distribution, be it the RC4, RSA, - * lhash, DES, etc., code; not just the SSL code. The SSL documentation - * included with this distribution is covered by the same copyright terms - * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * - * Copyright remains Eric Young's, and as such any Copyright notices in - * the code are not to be removed. - * If this package is used in a product, Eric Young should be given attribution - * as the author of the parts of the library used. - * This can be in the form of a textual message at program startup or - * in documentation (online or textual) provided with the package. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * "This product includes cryptographic software written by - * Eric Young (eay@cryptsoft.com)" - * The word 'cryptographic' can be left out if the rouines from the library - * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from - * the apps directory (application code) you must include an acknowledgement: - * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * - * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * The licence and distribution terms for any publically available version or - * derivative of this code cannot be changed. i.e. this code cannot simply be - * copied and put under another distribution licence - * [including the GNU Public Licence.] - */ - -#include <stdio.h> -#include <string.h> -#include <openssl/sha.h> -#include <openssl/crypto.h> - -#ifndef OPENSSL_NO_SHA0 -unsigned char *SHA(const unsigned char *d, size_t n, unsigned char *md) -{ - SHA_CTX c; - static unsigned char m[SHA_DIGEST_LENGTH]; - - if (md == NULL) - md = m; - if (!SHA_Init(&c)) - return NULL; - SHA_Update(&c, d, n); - SHA_Final(md, &c); - OPENSSL_cleanse(&c, sizeof(c)); - return (md); -} -#endif |