| Age | Commit message (Collapse) | Author |
|---|
|
perror(L"%d sections contain entry point\n") lacks an argument
corresponding to %d.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Copying the value of datasize_in to two further variables and then using
all three randomly in the code makes it hard to read.
datasize_in is never changed in generate_hash() so we can do with this
parameter alone. Rename it to datasize.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
This just makes one less thing we have to make sure is the same between
the test harnesses and the runtime code.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
The load options handling is quite complicated and tries to accomodate
several scenarios, but there are currently multiple issues:
- If the supplied LoadOptions is an EFI_LOAD_OPTION structure,
second_stage gets initialized to the entire contents of the OptionalData
field and load_options is initialized to NULL, which means it isn't
possible to pass additional options to the second stage loader (and it
looks like the intention is for this to be supported).
- If the supplied LoadOptions contains 2 or more strings, the code seems
to assume that shim was executed from the UEFI shell and that the first
argument is the path of the shim executable, so it's ignored. But this
breaks the ability to pass additional options to the second stage loader
from BDS on firmware implementations that initialize LoadOptions to just
the OptionalData field of the EFI_LOAD_OPTION, which is what EDK2 seems
to do.
This is moot anyway because this case (strings == 2) doesn't actually seem
to work, as nothing sets loader_len and therefore second_stage is not set
to the custom loader path.
- If the supplied LoadOptions contains a single string that isn't shim's
path, nothing sets loader_len and therefore second_stage isn't set at the
end of set_second_stage.
- set_second_stage replaces L' ' characters with L'\0' - whilst this is
useful to NULL terminate the path for the second stage, it doesn't seem
quite right to do this for the remaining LoadOptions data. Grub's
chainloader command supplies additional arguments as a NULL-terminated
space-delimited string via LoadOptions. Making it NULL-delimited seems to
be incompatible with the kernel's commandline handling, which wouldn't
work for scenarios where you might want to direct-boot a kernel image
(wrapped in systemd's EFI stub) from shim.
- handle_image passes the original LoadOptions to the second stage if
load_options is NULL, which means that the second stage currently always
gets shim's load options.
I've made an attempt to try to fix things. After the initial
checks in set_second_stage, it now does this:
- Tries to parse LoadOptions as an EFI_LOAD_OPTION in order to extract
the OptionalData if it is.
- If it's not an EFI_LOAD_OPTION, check if the first string is the
current shim path and ignore it if it is (the UEFI shell case).
- Split LoadOptions in to a single NULL terminated string (used to
initialize second_stage) and the unmodified remaining data (used to
initialize load_options and load_options_size).
I've also modified handle_image to always set LoadOptions and
LoadOptionsSize. If shim is executed with no options, or is only
executed with a single option to override the second stage loader
path, the second stage is executed with LoadOptions = NULL and
LoadOptionsSize = 0 now.
I've tested this on EDK2 and I can load a custom loader with extra
options from both BDS and the UEFI shell:
FS0:\> shimx64.efi test.efi
LoadOptionsSize: 0
LoadOptions: (null)
FS0:\> shimx64.efi test.efi
LoadOptionsSize: 0
LoadOptions: (null)
FS0:\> shimx64.efi test.efi foo bar
LoadOptionsSize: 16
LoadOptions: foo bar
|
|
This adds dprint() to a bunch of our error returns.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
This re-structures our includes so we can be sure everything is always
including all the system headers in a uniform, predictable way.
Temporarily it also adds a bunch of junk at all the places we use
variadic functions to specifically pick either the MS (cdecl) or ELF
ABIs.
I'm not 100% sure that's all correct (see later patch) but it's enough
to allow this to build.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
The current code rejects the .sbat section if the VirtualSize and
SizeOfRawData fields of the section header aren't the same, but this
is too strict. The VirtualSize corresponds to the size of the SBAT
metadata and isn't necessarily a multiple of the file alignment.
The on-disk size (SizeOfRawData) is a multiple of the file alignment
and is zero padded. Make sure that the on-disk size is at least as
large as virtual size, and ignore the .sbat section if it isn't.
This should fix https://github.com/rhboot/shim/issues/281.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
|
|
Signed-off-by: Gary Lin <glin@suse.com>
|
|
This makes the .sbat section parser use parse_csv_data(). It also
re-names a couple of the structs, because they were still too easy to
get lost in.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
This is needed for shim to verify itself when booting, to make sure that
shim binaries can't be executed anymore after been revoked by SBAT.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
handle_image() is quite huge and complex.
This patch moves the SBAT validation code from handle_image() to a new
function, handle_sbat().
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
On a typical boot we validate at least two binaries; parsing the SBAT
EFI variable each time, when it should not be changing, is not worth the
effort.
This patch moves the parsing out to some setup code, instead of doing it
during the verification stage.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Per Peter Jones suggestion, we will be flexible in what data we expect
while parsing the variable. Three fields are mandatory:
component_generation, component_name_size, component_name
However we also support adding comments and additional information to be
added after component name, with ',' as a separator. Those information
will be ignored and not used for verification purposes.
So:
grub,1
and
grub,1,wow,this,is,my,comment
will provide exactly same set of data for verification.
[0]: https://github.com/rhboot/shim/blob/main/SBAT.md
Signed-off-by: Alex Burmashev <alexander.burmashev@oracle.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
The struct sbat isn't doing anything and only has two fields so let's pass
pass those two to the functions directly instead of storing it in a struct.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
It's a left over from an early implementation that was never cleaned.
Reported-by: Christopher Co <christopher.co@microsoft.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Right now we allocate the PE file's contents in RW memory, but hopefully
that won't always be the case. Our SBAT parsing, however, very much
expects to be able to edit it. We also don't actually know that shim's
.sbat section is loaded r/w, so we can't necessarily write there.
This patch copies the SBAT data to its own buffer, plus one NUL byte at
the end, so we can always be sure that will work.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Parse the SBAT [0] Version-Based Revocation Metadata that's contained in a
.sbat data section of the loaded PE binary. This information is used along
with data in a SBAT variable to determine if a EFI binary has been revoked.
[0]: https://github.com/rhboot/shim/blob/sbat/SBAT.md
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
