| Age | Commit message (Collapse) | Author |
|---|
|
start is a UCS-2 character pointer and loader_len is a number of bytes.
Adjust loader_len to count characters before adding to the start pointer.
|
|
Signed-off-by: Gary Lin <glin@suse.com>
|
|
The commit 03b9f800 introduces an issue in case the gap between
SumOfBytesHashed and context->SecDir->VirtualAddress exists.
This would be a typo because a formal PE image always meet
SumOfBytesHashed + hashsize == context->SecDir->VirtualAddress either
the gap exists or not.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
|
|
Sometimes we get our own path in LoadOptions for no clear reason. Don't
execute it, just ignore it.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Under a strict memory protection policy, UEFI may give out EfiLoaderData
memory with the XN attribute set. So use EfiLoaderCode explicitly.
At the same time, use a page based allocation rather than a pool
allocation, which is more appropriate when loading PE/COFF images.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Previously we were returning EFI_ACCESS_DENIED at some places and
EFI_SECURITY_VIOLATION at others. When we're checking whether to run
MokManager, we're checking EFI_SECURITY_VIOLATION, which is more or less
analogous with what the spec says StartImage() returns. So we should
always have that as the return code.
I believe this will fix github issue #44.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Some machines have already embedded MokSBStateRT varaible with
EFI_VARIABLE_NON_VOLATILE attribute, and some users might disable shim
vailidation manually by creating MokSBStateRT. It causes mirroring MokSBState
fail because the variable cannot be set with different attribute again, and gets
error massage every time when booting.
Fix it with checking the MokSBStateRT existence and deleting it before
mirroring it.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
|
|
Currently generate_hash() attempts to include any trailing data at the
end of the binary in the resulting digest, but it won't include such
data if the size computed is wrong because context->SecDir->Size is
invalid. In this case the return code is EFI_SUCCESS, and the hash will
match any a binary as if the Attribute Certificate Table and anything
after it are missing. This is wrong.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
For starters; don't allow the "module signing" OID; which ought to
only ever be used for signing kernel modules, not signing EFI binaries.
Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>
|
|
In the branch I wrote the code on, "size" was a thing. On this branch
it isn't.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Authenticode Certificate length is available in Certificate Table
(inside PE header) and also in signature header(WIN_CERTIFICATE) itself.
Code in 'check_backlist()' method uses length from signature header,
whereas, AuthenticodeVerify() call inside 'verify_buffer()' method uses
the length in signature header. This causes a security vulnerability issue :
Good Scenario : Assume shim1.crt is used for signing grub.efi and
shim1.crt is embedded inside shim.efi. Also, assume shim1.crt got
compromised and therefore it was added in 'dbx' database. Now, when
shim.efi will attempt to load grub.efi, it will fail loading with
log message "Binary is blacklisted" because 'check_blacklist' call
will detect the presence of 'shim1.crt' in 'dbx'.
Vulnerable Scenario : Similar as above. Add 'shim1.crt' in dbx database.
Also, tamper the earlier signed grub.efi file by placing 0x0000 in the
WIN_CERTIFICATE.dwLength.
(Open grub.efi/vmlinuz signed binary with hex editor.
Go to 0x128 address and read out the address from 0x128 until
0x12B in little Indian order from right to left.
Jump to the address from 0x128 address area.
First 8bytes are the signature header area which consist of
signature size(4bytes), revision(2bytes) and type(2bytes).
So tamper the first 4 bytes for signature size and save the binary.
)
With this tampered grub.efi, shim.efi loads it successfully because
'check_blacklist()' call fails to detect the presence of shim1.crt in 'dbx'
database.
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
|
|
When fallback.efi is not present, the should_use_fallback error path
attempts to close a file that has already been closed, resulting in a
hang. This issue only affects certain systems.
This is a regression from version 0.8 and was introduced by commit
4794822.
Signed-off-by: Benjamin Antin <ben.antin@endlessm.com>
|
|
Fix the compilation error from gcc:
shim.c: In function ‘handle_image’:
shim.c:1121:15: error: unused variable ‘size’ [-Werror=unused-variable]
unsigned int size;
^~~~
Signed-off-by: Gary Lin <glin@suse.com>
|
|
MokDBState is a 8-bit unsigned integer. Looks like a typo here.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
|
|
This commit adds the basic support for HTTPBoot, i.e. to fetch
the next stage loader with the HTTP protocol.
It requires gnu-efi >= 3.0.3 to support the URI device path and
Ip4Config2 or Ip6Config protocol support in the UEFI implementation.
To build shim.efi with HTTPBoot support:
make ENABLE_HTTPBOOT=1 shim.efi
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
|
|
|
|
On baytrail, we've got 32-bit firmware, 32-bit efi utilities, and 64-bit
kernel. So since most distros will want 32+64 EFI media booting a
64-bit kernel, we have to name them better on the filesystem.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
|
|
Add support for measuring the MOK database and secure boot state into a
TPM, and do the same for the second stage loader. This avoids a hole in
TPM measurement between the firmware and the second stage loader.
|
|
The second stage set is not working after commit
3322257e611e2000f79726d295bb4845bbe449e7 for those which load option
only have one string.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
|
|
Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>
|
|
I found a machine whose BDS gives us relative paths, yay! The rest of
the code still works without that leading slash, so just make it one
more item we let through our StrnCaseCmp() filter.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
ExitBootServices() and Exit() should both clean these up anyway, but we
should do the right thing nonetheless.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
We decide if it's a full path by if it starts with \\EFI\\. That's
quite lazy, but we can't just check \\ like you'd hope, because we need
to stay compatible with what we've set as DEFAULT_LOADER in the past,
and I don't feel like writing the full path traversal file test.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Woops. The net outcome of these is going to be a sleep of unknown
duration, followed by either a) ResetSystem() with some random selection
of warm/cold boot, or b) ResetSystem() returning an error and shim
returning error from efi_main().
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Load options are a giant pain in the ass, because the shell is a giant
piece of junk. If we're invoked from the EFI shell, we get something
like this:
00000000 5c 00 45 00 36 00 49 00 5c 00 66 00 65 00 64 00 |\.E.F.I.\.f.e.d.|
00000010 6f 00 72 00 61 00 5c 00 73 00 68 00 69 00 6d 00 |o.r.a.\.s.h.i.m.|
00000020 78 00 36 00 34 00 2e 00 64 00 66 00 69 00 20 00 |x.6.4...e.f.i. .|
00000030 5c 00 45 00 46 00 49 00 5c 00 66 00 65 00 64 00 |\.E.F.I.\.f.e.d.|
00000040 6f 00 72 00 61 00 5c 00 66 00 77 00 75 00 70 00 |o.r.a.\.f.w.u.p.|
00000050 64 00 61 00 74 00 65 00 2e 00 65 00 66 00 20 00 |d.a.t.e.e.f.i. .|
00000060 00 00 66 00 73 00 30 00 3a 00 5c 00 00 00 |..f.s.0.:.\...|
which is just some paths rammed together separated by a UCS-2 NUL. But
if we're invoked from BDS, we get something more like:
00000000 01 00 00 00 62 00 4c 00 69 00 6e 00 75 00 78 00 |....b.L.i.n.u.x.|
00000010 20 00 46 00 69 00 72 00 6d 00 77 00 61 00 72 00 | .F.i.r.m.w.a.r.|
00000020 65 00 20 00 55 00 70 00 64 00 61 00 74 00 65 00 |e. .U.p.d.a.t.e.|
00000030 72 00 00 00 40 01 2a 00 01 00 00 00 00 08 00 00 |r.....*.........|
00000040 00 00 00 00 00 40 06 00 00 00 00 00 1a 9e 55 bf |.....@........U.|
00000050 04 57 f2 4f b4 4a ed 26 4a 40 6a 94 02 02 04 04 |.W.O.:.&J@j.....|
00000060 34 00 5c 00 45 00 46 00 49 00 5c 00 66 00 65 00 |4.\.E.F.I.f.e.d.|
00000070 64 00 6f 00 72 00 61 00 5c 00 73 00 68 00 69 00 |o.r.a.\.s.h.i.m.|
00000080 6d 00 78 00 36 00 34 00 2e 00 65 00 66 00 69 00 |x.6.4...e.f.i...|
00000090 00 00 7f ff 40 00 20 00 5c 00 66 00 77 00 75 00 |...... .\.f.w.u.|
000000a0 70 00 78 00 36 00 34 00 2e 00 65 00 66 00 69 00 |p.x.6.4...e.f.i.|
000000b0 00 00 |..|
which is clearly an EFI_LOAD_OPTION filled in halfway reasonably. In
short, the UEFI shell is still a useless piece of junk.
So anyway, try to determine which one we've got and handle it
appropriately.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
It's annoying to find out we're not in SB mode over and over. Really it
is.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
|
|
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
|
|
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
|
|
The new blacklist, MokListX, stores the keys and hashes that are
banned.
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
|
|
Right now applications run by shim get our wrapper for Exit(), but it
doesn't do as much cleanup as it should - shim itself also exits, but
currently is not doing all the cleanup it should be doing.
This changes it so all of shim's cleanup is also performed.
Based on a patch and lots of review from Gary Lin.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Right now if shim_verify() sees secure_mode()==0, it exits with
EFI_SUCCESS, but accidentally leaves in_protocol=1. This means any
other call will have supressed error/warning messages.
That's wrong, so don't do it.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Don't run MokManager on any random error from start_image(second_stage);
only try it if it /is/ the second stage, or if start_image gave us
EFI_SECURITY_VIOLATION.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
System services haven't been hooked if we're not in secure mode, so
do_exit() will never be called. In this case shim never gets control
once grub exits, which means if booting fails and the firmware tries
another boot option, it'll attempt to talk to the shim protocol we
installed.
This is wrong, because it is allowed to have been cleared from ram at
this time, since the task it's under has exited.
So just don't install the protocols when we're not enforcing.
This version also has a message and a 2-second stall after calling
start_image(), so that we can tell if we are on the expected return path
of our execution flow.
|
|
Turns out a) the codegen on aarch64 generates code that has real
alignment needs, and b) if we check the length of discardable sections
before discarding them, we error for no reason.
So do the error checking in the right order, and always enforce some
alignment because we know we have to.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
We replaced the build key with an empty file while compiling shim
for our distro. Skip the verification with the empty build key
since this makes no sense.
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
|
|
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Find the relocations based on the *file* address in the old binary,
because it's only the same as the virtual address some of the time.
Also perform some extra validation before processing it, and don't bail
out in /error/ if both ReloceBase and RelocEnd are null - that condition
is fine.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
When I merged 4bfb13d and fixed the conflicts, I managed to make the
in_protocol test exactly backwards, so that's why we don't currently see
error messages.
Signed-off-by: Peter Jones <pjones@redhat.com>
|
|
Actually check the size of our vendor cert quite early, so that there's
no confusion as to what's going on.
This isn't strictly necessary, in that in all cases if vendor_cert_size
is 0, then AuthenticodeVerify -> Pkcs7Verify() -> d2i_X509() will result
in a NULL "Cert", and it will return FALSE, and we'll reject the
signature, but better to avoid all that code in the first place. Belt
and suspenders and whatnot.
Based on a patch from https://github.com/TBOpen .
Signed-off-by: Peter Jones <pjones@redhat.com>
|
