diff options
Diffstat (limited to 'ext/lwip/src/core/udp.c')
| -rw-r--r-- | ext/lwip/src/core/udp.c | 1013 |
1 files changed, 0 insertions, 1013 deletions
diff --git a/ext/lwip/src/core/udp.c b/ext/lwip/src/core/udp.c deleted file mode 100644 index 32c7d384..00000000 --- a/ext/lwip/src/core/udp.c +++ /dev/null @@ -1,1013 +0,0 @@ -/** - * @file - * User Datagram Protocol module - * - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels <adam@sics.se> - * - */ - - -/* udp.c - * - * The code for the User Datagram Protocol UDP & UDPLite (RFC 3828). - * - */ - -/* @todo Check the use of '(struct udp_pcb).chksum_len_rx'! - */ - -#include "lwip/opt.h" - -#if LWIP_UDP /* don't build if not configured for use in lwipopts.h */ - -#include "lwip/udp.h" -#include "lwip/def.h" -#include "lwip/memp.h" -#include "lwip/inet_chksum.h" -#include "lwip/ip_addr.h" -#include "lwip/netif.h" -#include "lwip/icmp.h" -#include "lwip/stats.h" -#include "lwip/snmp.h" -#include "arch/perf.h" -#include "lwip/dhcp.h" - -#include <string.h> - -#ifndef UDP_LOCAL_PORT_RANGE_START -/* From http://www.iana.org/assignments/port-numbers: - "The Dynamic and/or Private Ports are those from 49152 through 65535" */ -#define UDP_LOCAL_PORT_RANGE_START 0xc000 -#define UDP_LOCAL_PORT_RANGE_END 0xffff -#define UDP_ENSURE_LOCAL_PORT_RANGE(port) (((port) & ~UDP_LOCAL_PORT_RANGE_START) + UDP_LOCAL_PORT_RANGE_START) -#endif - -/* last local UDP port */ -static u16_t udp_port = UDP_LOCAL_PORT_RANGE_START; - -/* The list of UDP PCBs */ -/* exported in udp.h (was static) */ -struct udp_pcb *udp_pcbs; - -/** - * Initialize this module. - */ -void -udp_init(void) -{ -#if LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS && defined(LWIP_RAND) - udp_port = UDP_ENSURE_LOCAL_PORT_RANGE(LWIP_RAND()); -#endif /* LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS && defined(LWIP_RAND) */ -} - -/** - * Allocate a new local UDP port. - * - * @return a new (free) local UDP port number - */ -static u16_t -udp_new_port(void) -{ - u16_t n = 0; - struct udp_pcb *pcb; - -again: - if (udp_port++ == UDP_LOCAL_PORT_RANGE_END) { - udp_port = UDP_LOCAL_PORT_RANGE_START; - } - /* Check all PCBs. */ - for(pcb = udp_pcbs; pcb != NULL; pcb = pcb->next) { - if (pcb->local_port == udp_port) { - if (++n > (UDP_LOCAL_PORT_RANGE_END - UDP_LOCAL_PORT_RANGE_START)) { - return 0; - } - goto again; - } - } - return udp_port; -#if 0 - struct udp_pcb *ipcb = udp_pcbs; - while ((ipcb != NULL) && (udp_port != UDP_LOCAL_PORT_RANGE_END)) { - if (ipcb->local_port == udp_port) { - /* port is already used by another udp_pcb */ - udp_port++; - /* restart scanning all udp pcbs */ - ipcb = udp_pcbs; - } else { - /* go on with next udp pcb */ - ipcb = ipcb->next; - } - } - if (ipcb != NULL) { - return 0; - } - return udp_port; -#endif -} - -/** - * Process an incoming UDP datagram. - * - * Given an incoming UDP datagram (as a chain of pbufs) this function - * finds a corresponding UDP PCB and hands over the pbuf to the pcbs - * recv function. If no pcb is found or the datagram is incorrect, the - * pbuf is freed. - * - * @param p pbuf to be demultiplexed to a UDP PCB. - * @param inp network interface on which the datagram was received. - * - */ -void -udp_input(struct pbuf *p, struct netif *inp) -{ - struct udp_hdr *udphdr; - struct udp_pcb *pcb, *prev; - struct udp_pcb *uncon_pcb; - struct ip_hdr *iphdr; - u16_t src, dest; - u8_t local_match; - u8_t broadcast; - - PERF_START; - - UDP_STATS_INC(udp.recv); - - iphdr = (struct ip_hdr *)p->payload; - - /* Check minimum length (IP header + UDP header) - * and move payload pointer to UDP header */ - if (p->tot_len < (IPH_HL(iphdr) * 4 + UDP_HLEN) || pbuf_header(p, -(s16_t)(IPH_HL(iphdr) * 4))) { - /* drop short packets */ - LWIP_DEBUGF(UDP_DEBUG, - ("udp_input: short UDP datagram (%"U16_F" bytes) discarded\n", p->tot_len)); - UDP_STATS_INC(udp.lenerr); - UDP_STATS_INC(udp.drop); - snmp_inc_udpinerrors(); - pbuf_free(p); - goto end; - } - - udphdr = (struct udp_hdr *)p->payload; - - /* is broadcast packet ? */ - broadcast = ip_addr_isbroadcast(¤t_iphdr_dest, inp); - - LWIP_DEBUGF(UDP_DEBUG, ("udp_input: received datagram of length %"U16_F"\n", p->tot_len)); - - /* convert src and dest ports to host byte order */ - src = ntohs(udphdr->src); - dest = ntohs(udphdr->dest); - - udp_debug_print(udphdr); - - /* print the UDP source and destination */ - LWIP_DEBUGF(UDP_DEBUG, - ("udp (%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F") <-- " - "(%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F")\n", - ip4_addr1_16(&iphdr->dest), ip4_addr2_16(&iphdr->dest), - ip4_addr3_16(&iphdr->dest), ip4_addr4_16(&iphdr->dest), ntohs(udphdr->dest), - ip4_addr1_16(&iphdr->src), ip4_addr2_16(&iphdr->src), - ip4_addr3_16(&iphdr->src), ip4_addr4_16(&iphdr->src), ntohs(udphdr->src))); - -#if LWIP_DHCP - pcb = NULL; - /* when LWIP_DHCP is active, packets to DHCP_CLIENT_PORT may only be processed by - the dhcp module, no other UDP pcb may use the local UDP port DHCP_CLIENT_PORT */ - if (dest == DHCP_CLIENT_PORT) { - /* all packets for DHCP_CLIENT_PORT not coming from DHCP_SERVER_PORT are dropped! */ - if (src == DHCP_SERVER_PORT) { - if ((inp->dhcp != NULL) && (inp->dhcp->pcb != NULL)) { - /* accept the packe if - (- broadcast or directed to us) -> DHCP is link-layer-addressed, local ip is always ANY! - - inp->dhcp->pcb->remote == ANY or iphdr->src */ - if ((ip_addr_isany(&inp->dhcp->pcb->remote_ip) || - ip_addr_cmp(&(inp->dhcp->pcb->remote_ip), ¤t_iphdr_src))) { - pcb = inp->dhcp->pcb; - } - } - } - } else -#endif /* LWIP_DHCP */ - { - prev = NULL; - local_match = 0; - uncon_pcb = NULL; - /* Iterate through the UDP pcb list for a matching pcb. - * 'Perfect match' pcbs (connected to the remote port & ip address) are - * preferred. If no perfect match is found, the first unconnected pcb that - * matches the local port and ip address gets the datagram. */ - for (pcb = udp_pcbs; pcb != NULL; pcb = pcb->next) { - local_match = 0; - /* print the PCB local and remote address */ - LWIP_DEBUGF(UDP_DEBUG, - ("pcb (%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F") --- " - "(%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F")\n", - ip4_addr1_16(&pcb->local_ip), ip4_addr2_16(&pcb->local_ip), - ip4_addr3_16(&pcb->local_ip), ip4_addr4_16(&pcb->local_ip), pcb->local_port, - ip4_addr1_16(&pcb->remote_ip), ip4_addr2_16(&pcb->remote_ip), - ip4_addr3_16(&pcb->remote_ip), ip4_addr4_16(&pcb->remote_ip), pcb->remote_port)); - - /* compare PCB local addr+port to UDP destination addr+port */ - if (pcb->local_port == dest) { - if ( - (!broadcast && ip_addr_isany(&pcb->local_ip)) || - ip_addr_cmp(&(pcb->local_ip), ¤t_iphdr_dest) || -#if LWIP_IGMP - ip_addr_ismulticast(¤t_iphdr_dest) || -#endif /* LWIP_IGMP */ -#if IP_SOF_BROADCAST_RECV - (broadcast && ip_get_option(pcb, SOF_BROADCAST) && - (ip_addr_isany(&pcb->local_ip) || - ip_addr_netcmp(&pcb->local_ip, ip_current_dest_addr(), &inp->netmask)))) { -#else /* IP_SOF_BROADCAST_RECV */ - (broadcast && - (ip_addr_isany(&pcb->local_ip) || - ip_addr_netcmp(&pcb->local_ip, ip_current_dest_addr(), &inp->netmask)))) { -#endif /* IP_SOF_BROADCAST_RECV */ - local_match = 1; - if ((uncon_pcb == NULL) && - ((pcb->flags & UDP_FLAGS_CONNECTED) == 0)) { - /* the first unconnected matching PCB */ - uncon_pcb = pcb; - } - } - } - /* compare PCB remote addr+port to UDP source addr+port */ - if ((local_match != 0) && - (pcb->remote_port == src) && - (ip_addr_isany(&pcb->remote_ip) || - ip_addr_cmp(&(pcb->remote_ip), ¤t_iphdr_src))) { - /* the first fully matching PCB */ - if (prev != NULL) { - /* move the pcb to the front of udp_pcbs so that is - found faster next time */ - prev->next = pcb->next; - pcb->next = udp_pcbs; - udp_pcbs = pcb; - } else { - UDP_STATS_INC(udp.cachehit); - } - break; - } - prev = pcb; - } - /* no fully matching pcb found? then look for an unconnected pcb */ - if (pcb == NULL) { - pcb = uncon_pcb; - } - } - - /* Check checksum if this is a match or if it was directed at us. */ - if (pcb != NULL || ip_addr_cmp(&inp->ip_addr, ¤t_iphdr_dest)) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_input: calculating checksum\n")); -#if LWIP_UDPLITE - if (IPH_PROTO(iphdr) == IP_PROTO_UDPLITE) { - /* Do the UDP Lite checksum */ -#if CHECKSUM_CHECK_UDP - u16_t chklen = ntohs(udphdr->len); - if (chklen < sizeof(struct udp_hdr)) { - if (chklen == 0) { - /* For UDP-Lite, checksum length of 0 means checksum - over the complete packet (See RFC 3828 chap. 3.1) */ - chklen = p->tot_len; - } else { - /* At least the UDP-Lite header must be covered by the - checksum! (Again, see RFC 3828 chap. 3.1) */ - UDP_STATS_INC(udp.chkerr); - UDP_STATS_INC(udp.drop); - snmp_inc_udpinerrors(); - pbuf_free(p); - goto end; - } - } - if (inet_chksum_pseudo_partial(p, ¤t_iphdr_src, ¤t_iphdr_dest, - IP_PROTO_UDPLITE, p->tot_len, chklen) != 0) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS, - ("udp_input: UDP Lite datagram discarded due to failing checksum\n")); - UDP_STATS_INC(udp.chkerr); - UDP_STATS_INC(udp.drop); - snmp_inc_udpinerrors(); - pbuf_free(p); - goto end; - } -#endif /* CHECKSUM_CHECK_UDP */ - } else -#endif /* LWIP_UDPLITE */ - { -#if CHECKSUM_CHECK_UDP - if (udphdr->chksum != 0) { - if (inet_chksum_pseudo(p, ip_current_src_addr(), ip_current_dest_addr(), - IP_PROTO_UDP, p->tot_len) != 0) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS, - ("udp_input: UDP datagram discarded due to failing checksum\n")); - UDP_STATS_INC(udp.chkerr); - UDP_STATS_INC(udp.drop); - snmp_inc_udpinerrors(); - pbuf_free(p); - goto end; - } - } -#endif /* CHECKSUM_CHECK_UDP */ - } - if(pbuf_header(p, -UDP_HLEN)) { - /* Can we cope with this failing? Just assert for now */ - LWIP_ASSERT("pbuf_header failed\n", 0); - UDP_STATS_INC(udp.drop); - snmp_inc_udpinerrors(); - pbuf_free(p); - goto end; - } - if (pcb != NULL) { - snmp_inc_udpindatagrams(); -#if SO_REUSE && SO_REUSE_RXTOALL - if ((broadcast || ip_addr_ismulticast(¤t_iphdr_dest)) && - ip_get_option(pcb, SOF_REUSEADDR)) { - /* pass broadcast- or multicast packets to all multicast pcbs - if SOF_REUSEADDR is set on the first match */ - struct udp_pcb *mpcb; - u8_t p_header_changed = 0; - for (mpcb = udp_pcbs; mpcb != NULL; mpcb = mpcb->next) { - if (mpcb != pcb) { - /* compare PCB local addr+port to UDP destination addr+port */ - if ((mpcb->local_port == dest) && - ((!broadcast && ip_addr_isany(&mpcb->local_ip)) || - ip_addr_cmp(&(mpcb->local_ip), ¤t_iphdr_dest) || -#if LWIP_IGMP - ip_addr_ismulticast(¤t_iphdr_dest) || -#endif /* LWIP_IGMP */ -#if IP_SOF_BROADCAST_RECV - (broadcast && ip_get_option(mpcb, SOF_BROADCAST)))) { -#else /* IP_SOF_BROADCAST_RECV */ - (broadcast))) { -#endif /* IP_SOF_BROADCAST_RECV */ - /* pass a copy of the packet to all local matches */ - if (mpcb->recv != NULL) { - struct pbuf *q; - /* for that, move payload to IP header again */ - if (p_header_changed == 0) { - pbuf_header(p, (s16_t)((IPH_HL(iphdr) * 4) + UDP_HLEN)); - p_header_changed = 1; - } - q = pbuf_alloc(PBUF_RAW, p->tot_len, PBUF_RAM); - if (q != NULL) { - err_t err = pbuf_copy(q, p); - if (err == ERR_OK) { - /* move payload to UDP data */ - pbuf_header(q, -(s16_t)((IPH_HL(iphdr) * 4) + UDP_HLEN)); - mpcb->recv(mpcb->recv_arg, mpcb, q, ip_current_src_addr(), src); - } - } - } - } - } - } - if (p_header_changed) { - /* and move payload to UDP data again */ - pbuf_header(p, -(s16_t)((IPH_HL(iphdr) * 4) + UDP_HLEN)); - } - } -#endif /* SO_REUSE && SO_REUSE_RXTOALL */ - /* callback */ - if (pcb->recv != NULL) { - /* now the recv function is responsible for freeing p */ - pcb->recv(pcb->recv_arg, pcb, p, ip_current_src_addr(), src); - } else { - /* no recv function registered? then we have to free the pbuf! */ - pbuf_free(p); - goto end; - } - } else { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_input: not for us.\n")); - -#if LWIP_ICMP - /* No match was found, send ICMP destination port unreachable unless - destination address was broadcast/multicast. */ - if (!broadcast && - !ip_addr_ismulticast(¤t_iphdr_dest)) { - /* move payload pointer back to ip header */ - pbuf_header(p, (IPH_HL(iphdr) * 4) + UDP_HLEN); - LWIP_ASSERT("p->payload == iphdr", (p->payload == iphdr)); - icmp_dest_unreach(p, ICMP_DUR_PORT); - } -#endif /* LWIP_ICMP */ - UDP_STATS_INC(udp.proterr); - UDP_STATS_INC(udp.drop); - snmp_inc_udpnoports(); - pbuf_free(p); - } - } else { - pbuf_free(p); - } -end: - PERF_STOP("udp_input"); -} - -/** - * Send data using UDP. - * - * @param pcb UDP PCB used to send the data. - * @param p chain of pbuf's to be sent. - * - * The datagram will be sent to the current remote_ip & remote_port - * stored in pcb. If the pcb is not bound to a port, it will - * automatically be bound to a random port. - * - * @return lwIP error code. - * - ERR_OK. Successful. No error occured. - * - ERR_MEM. Out of memory. - * - ERR_RTE. Could not find route to destination address. - * - More errors could be returned by lower protocol layers. - * - * @see udp_disconnect() udp_sendto() - */ -err_t -udp_send(struct udp_pcb *pcb, struct pbuf *p) -{ - /* send to the packet using remote ip and port stored in the pcb */ - return udp_sendto(pcb, p, &pcb->remote_ip, pcb->remote_port); -} - -#if LWIP_CHECKSUM_ON_COPY -/** Same as udp_send() but with checksum - */ -err_t -udp_send_chksum(struct udp_pcb *pcb, struct pbuf *p, - u8_t have_chksum, u16_t chksum) -{ - /* send to the packet using remote ip and port stored in the pcb */ - return udp_sendto_chksum(pcb, p, &pcb->remote_ip, pcb->remote_port, - have_chksum, chksum); -} -#endif /* LWIP_CHECKSUM_ON_COPY */ - -/** - * Send data to a specified address using UDP. - * - * @param pcb UDP PCB used to send the data. - * @param p chain of pbuf's to be sent. - * @param dst_ip Destination IP address. - * @param dst_port Destination UDP port. - * - * dst_ip & dst_port are expected to be in the same byte order as in the pcb. - * - * If the PCB already has a remote address association, it will - * be restored after the data is sent. - * - * @return lwIP error code (@see udp_send for possible error codes) - * - * @see udp_disconnect() udp_send() - */ -err_t -udp_sendto(struct udp_pcb *pcb, struct pbuf *p, - ip_addr_t *dst_ip, u16_t dst_port) -{ -#if LWIP_CHECKSUM_ON_COPY - return udp_sendto_chksum(pcb, p, dst_ip, dst_port, 0, 0); -} - -/** Same as udp_sendto(), but with checksum */ -err_t -udp_sendto_chksum(struct udp_pcb *pcb, struct pbuf *p, ip_addr_t *dst_ip, - u16_t dst_port, u8_t have_chksum, u16_t chksum) -{ -#endif /* LWIP_CHECKSUM_ON_COPY */ - struct netif *netif; - - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_send\n")); - - /* find the outgoing network interface for this packet */ -#if LWIP_IGMP - netif = ip_route((ip_addr_ismulticast(dst_ip))?(&(pcb->multicast_ip)):(dst_ip)); -#else - netif = ip_route(dst_ip); -#endif /* LWIP_IGMP */ - - /* no outgoing network interface could be found? */ - if (netif == NULL) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS, ("udp_send: No route to %"U16_F".%"U16_F".%"U16_F".%"U16_F"\n", - ip4_addr1_16(dst_ip), ip4_addr2_16(dst_ip), ip4_addr3_16(dst_ip), ip4_addr4_16(dst_ip))); - UDP_STATS_INC(udp.rterr); - return ERR_RTE; - } -#if LWIP_CHECKSUM_ON_COPY - return udp_sendto_if_chksum(pcb, p, dst_ip, dst_port, netif, have_chksum, chksum); -#else /* LWIP_CHECKSUM_ON_COPY */ - return udp_sendto_if(pcb, p, dst_ip, dst_port, netif); -#endif /* LWIP_CHECKSUM_ON_COPY */ -} - -/** - * Send data to a specified address using UDP. - * The netif used for sending can be specified. - * - * This function exists mainly for DHCP, to be able to send UDP packets - * on a netif that is still down. - * - * @param pcb UDP PCB used to send the data. - * @param p chain of pbuf's to be sent. - * @param dst_ip Destination IP address. - * @param dst_port Destination UDP port. - * @param netif the netif used for sending. - * - * dst_ip & dst_port are expected to be in the same byte order as in the pcb. - * - * @return lwIP error code (@see udp_send for possible error codes) - * - * @see udp_disconnect() udp_send() - */ -err_t -udp_sendto_if(struct udp_pcb *pcb, struct pbuf *p, - ip_addr_t *dst_ip, u16_t dst_port, struct netif *netif) -{ -#if LWIP_CHECKSUM_ON_COPY - return udp_sendto_if_chksum(pcb, p, dst_ip, dst_port, netif, 0, 0); -} - -/** Same as udp_sendto_if(), but with checksum */ -err_t -udp_sendto_if_chksum(struct udp_pcb *pcb, struct pbuf *p, ip_addr_t *dst_ip, - u16_t dst_port, struct netif *netif, u8_t have_chksum, - u16_t chksum) -{ -#endif /* LWIP_CHECKSUM_ON_COPY */ - struct udp_hdr *udphdr; - ip_addr_t *src_ip; - err_t err; - struct pbuf *q; /* q will be sent down the stack */ - -#if IP_SOF_BROADCAST - /* broadcast filter? */ - if (!ip_get_option(pcb, SOF_BROADCAST) && ip_addr_isbroadcast(dst_ip, netif)) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS, - ("udp_sendto_if: SOF_BROADCAST not enabled on pcb %p\n", (void *)pcb)); - return ERR_VAL; - } -#endif /* IP_SOF_BROADCAST */ - - /* if the PCB is not yet bound to a port, bind it here */ - if (pcb->local_port == 0) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_send: not yet bound to a port, binding now\n")); - err = udp_bind(pcb, &pcb->local_ip, pcb->local_port); - if (err != ERR_OK) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_LEVEL_SERIOUS, ("udp_send: forced port bind failed\n")); - return err; - } - } - - /* not enough space to add an UDP header to first pbuf in given p chain? */ - if (pbuf_header(p, UDP_HLEN)) { - /* allocate header in a separate new pbuf */ - q = pbuf_alloc(PBUF_IP, UDP_HLEN, PBUF_RAM); - /* new header pbuf could not be allocated? */ - if (q == NULL) { - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_LEVEL_SERIOUS, ("udp_send: could not allocate header\n")); - return ERR_MEM; - } - if (p->tot_len != 0) { - /* chain header q in front of given pbuf p (only if p contains data) */ - pbuf_chain(q, p); - } - /* first pbuf q points to header pbuf */ - LWIP_DEBUGF(UDP_DEBUG, - ("udp_send: added header pbuf %p before given pbuf %p\n", (void *)q, (void *)p)); - } else { - /* adding space for header within p succeeded */ - /* first pbuf q equals given pbuf */ - q = p; - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: added header in given pbuf %p\n", (void *)p)); - } - LWIP_ASSERT("check that first pbuf can hold struct udp_hdr", - (q->len >= sizeof(struct udp_hdr))); - /* q now represents the packet to be sent */ - udphdr = (struct udp_hdr *)q->payload; - udphdr->src = htons(pcb->local_port); - udphdr->dest = htons(dst_port); - /* in UDP, 0 checksum means 'no checksum' */ - udphdr->chksum = 0x0000; - - /* Multicast Loop? */ -#if LWIP_IGMP - if (ip_addr_ismulticast(dst_ip) && ((pcb->flags & UDP_FLAGS_MULTICAST_LOOP) != 0)) { - q->flags |= PBUF_FLAG_MCASTLOOP; - } -#endif /* LWIP_IGMP */ - - - /* PCB local address is IP_ANY_ADDR? */ - if (ip_addr_isany(&pcb->local_ip)) { - /* use outgoing network interface IP address as source address */ - src_ip = &(netif->ip_addr); - } else { - /* check if UDP PCB local IP address is correct - * this could be an old address if netif->ip_addr has changed */ - if (!ip_addr_cmp(&(pcb->local_ip), &(netif->ip_addr))) { - /* local_ip doesn't match, drop the packet */ - if (q != p) { - /* free the header pbuf */ - pbuf_free(q); - q = NULL; - /* p is still referenced by the caller, and will live on */ - } - return ERR_VAL; - } - /* use UDP PCB local IP address as source address */ - src_ip = &(pcb->local_ip); - } - - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: sending datagram of length %"U16_F"\n", q->tot_len)); - -#if LWIP_UDPLITE - /* UDP Lite protocol? */ - if (pcb->flags & UDP_FLAGS_UDPLITE) { - u16_t chklen, chklen_hdr; - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP LITE packet length %"U16_F"\n", q->tot_len)); - /* set UDP message length in UDP header */ - chklen_hdr = chklen = pcb->chksum_len_tx; - if ((chklen < sizeof(struct udp_hdr)) || (chklen > q->tot_len)) { - if (chklen != 0) { - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP LITE pcb->chksum_len is illegal: %"U16_F"\n", chklen)); - } - /* For UDP-Lite, checksum length of 0 means checksum - over the complete packet. (See RFC 3828 chap. 3.1) - At least the UDP-Lite header must be covered by the - checksum, therefore, if chksum_len has an illegal - value, we generate the checksum over the complete - packet to be safe. */ - chklen_hdr = 0; - chklen = q->tot_len; - } - udphdr->len = htons(chklen_hdr); - /* calculate checksum */ -#if CHECKSUM_GEN_UDP - udphdr->chksum = inet_chksum_pseudo_partial(q, src_ip, dst_ip, - IP_PROTO_UDPLITE, q->tot_len, -#if !LWIP_CHECKSUM_ON_COPY - chklen); -#else /* !LWIP_CHECKSUM_ON_COPY */ - (have_chksum ? UDP_HLEN : chklen)); - if (have_chksum) { - u32_t acc; - acc = udphdr->chksum + (u16_t)~(chksum); - udphdr->chksum = FOLD_U32T(acc); - } -#endif /* !LWIP_CHECKSUM_ON_COPY */ - - /* chksum zero must become 0xffff, as zero means 'no checksum' */ - if (udphdr->chksum == 0x0000) { - udphdr->chksum = 0xffff; - } -#endif /* CHECKSUM_GEN_UDP */ - /* output to IP */ - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: ip_output_if (,,,,IP_PROTO_UDPLITE,)\n")); - NETIF_SET_HWADDRHINT(netif, &pcb->addr_hint); - err = ip_output_if(q, src_ip, dst_ip, pcb->ttl, pcb->tos, IP_PROTO_UDPLITE, netif); - NETIF_SET_HWADDRHINT(netif, NULL); - } else -#endif /* LWIP_UDPLITE */ - { /* UDP */ - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP packet length %"U16_F"\n", q->tot_len)); - udphdr->len = htons(q->tot_len); - /* calculate checksum */ -#if CHECKSUM_GEN_UDP - if ((pcb->flags & UDP_FLAGS_NOCHKSUM) == 0) { - u16_t udpchksum; -#if LWIP_CHECKSUM_ON_COPY - if (have_chksum) { - u32_t acc; - udpchksum = inet_chksum_pseudo_partial(q, src_ip, dst_ip, IP_PROTO_UDP, - q->tot_len, UDP_HLEN); - acc = udpchksum + (u16_t)~(chksum); - udpchksum = FOLD_U32T(acc); - } else -#endif /* LWIP_CHECKSUM_ON_COPY */ - { - udpchksum = inet_chksum_pseudo(q, src_ip, dst_ip, IP_PROTO_UDP, q->tot_len); - } - - /* chksum zero must become 0xffff, as zero means 'no checksum' */ - if (udpchksum == 0x0000) { - udpchksum = 0xffff; - } - udphdr->chksum = udpchksum; - } -#endif /* CHECKSUM_GEN_UDP */ - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP checksum 0x%04"X16_F"\n", udphdr->chksum)); - LWIP_DEBUGF(UDP_DEBUG, ("udp_send: ip_output_if (,,,,IP_PROTO_UDP,)\n")); - /* output to IP */ - NETIF_SET_HWADDRHINT(netif, &pcb->addr_hint); - err = ip_output_if(q, src_ip, dst_ip, pcb->ttl, pcb->tos, IP_PROTO_UDP, netif); - NETIF_SET_HWADDRHINT(netif, NULL); - } - /* TODO: must this be increased even if error occured? */ - snmp_inc_udpoutdatagrams(); - - /* did we chain a separate header pbuf earlier? */ - if (q != p) { - /* free the header pbuf */ - pbuf_free(q); - q = NULL; - /* p is still referenced by the caller, and will live on */ - } - - UDP_STATS_INC(udp.xmit); - return err; -} - -/** - * Bind an UDP PCB. - * - * @param pcb UDP PCB to be bound with a local address ipaddr and port. - * @param ipaddr local IP address to bind with. Use IP_ADDR_ANY to - * bind to all local interfaces. - * @param port local UDP port to bind with. Use 0 to automatically bind - * to a random port between UDP_LOCAL_PORT_RANGE_START and - * UDP_LOCAL_PORT_RANGE_END. - * - * ipaddr & port are expected to be in the same byte order as in the pcb. - * - * @return lwIP error code. - * - ERR_OK. Successful. No error occured. - * - ERR_USE. The specified ipaddr and port are already bound to by - * another UDP PCB. - * - * @see udp_disconnect() - */ -err_t -udp_bind(struct udp_pcb *pcb, ip_addr_t *ipaddr, u16_t port) -{ - struct udp_pcb *ipcb; - u8_t rebind; - - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_bind(ipaddr = ")); - ip_addr_debug_print(UDP_DEBUG, ipaddr); - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, (", port = %"U16_F")\n", port)); - - rebind = 0; - /* Check for double bind and rebind of the same pcb */ - for (ipcb = udp_pcbs; ipcb != NULL; ipcb = ipcb->next) { - /* is this UDP PCB already on active list? */ - if (pcb == ipcb) { - /* pcb may occur at most once in active list */ - LWIP_ASSERT("rebind == 0", rebind == 0); - /* pcb already in list, just rebind */ - rebind = 1; - } - - /* By default, we don't allow to bind to a port that any other udp - PCB is alread bound to, unless *all* PCBs with that port have tha - REUSEADDR flag set. */ -#if SO_REUSE - else if (!ip_get_option(pcb, SOF_REUSEADDR) && - !ip_get_option(ipcb, SOF_REUSEADDR)) { -#else /* SO_REUSE */ - /* port matches that of PCB in list and REUSEADDR not set -> reject */ - else { -#endif /* SO_REUSE */ - if ((ipcb->local_port == port) && - /* IP address matches, or one is IP_ADDR_ANY? */ - (ip_addr_isany(&(ipcb->local_ip)) || - ip_addr_isany(ipaddr) || - ip_addr_cmp(&(ipcb->local_ip), ipaddr))) { - /* other PCB already binds to this local IP and port */ - LWIP_DEBUGF(UDP_DEBUG, - ("udp_bind: local port %"U16_F" already bound by another pcb\n", port)); - return ERR_USE; - } - } - } - - ip_addr_set(&pcb->local_ip, ipaddr); - - /* no port specified? */ - if (port == 0) { - port = udp_new_port(); - if (port == 0) { - /* no more ports available in local range */ - LWIP_DEBUGF(UDP_DEBUG, ("udp_bind: out of free UDP ports\n")); - return ERR_USE; - } - } - pcb->local_port = port; - snmp_insert_udpidx_tree(pcb); - /* pcb not active yet? */ - if (rebind == 0) { - /* place the PCB on the active list if not already there */ - pcb->next = udp_pcbs; - udp_pcbs = pcb; - } - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE, - ("udp_bind: bound to %"U16_F".%"U16_F".%"U16_F".%"U16_F", port %"U16_F"\n", - ip4_addr1_16(&pcb->local_ip), ip4_addr2_16(&pcb->local_ip), - ip4_addr3_16(&pcb->local_ip), ip4_addr4_16(&pcb->local_ip), - pcb->local_port)); - return ERR_OK; -} -/** - * Connect an UDP PCB. - * - * This will associate the UDP PCB with the remote address. - * - * @param pcb UDP PCB to be connected with remote address ipaddr and port. - * @param ipaddr remote IP address to connect with. - * @param port remote UDP port to connect with. - * - * @return lwIP error code - * - * ipaddr & port are expected to be in the same byte order as in the pcb. - * - * The udp pcb is bound to a random local port if not already bound. - * - * @see udp_disconnect() - */ -err_t -udp_connect(struct udp_pcb *pcb, ip_addr_t *ipaddr, u16_t port) -{ - struct udp_pcb *ipcb; - - if (pcb->local_port == 0) { - err_t err = udp_bind(pcb, &pcb->local_ip, pcb->local_port); - if (err != ERR_OK) { - return err; - } - } - - ip_addr_set(&pcb->remote_ip, ipaddr); - pcb->remote_port = port; - pcb->flags |= UDP_FLAGS_CONNECTED; -/** TODO: this functionality belongs in upper layers */ -#ifdef LWIP_UDP_TODO - /* Nail down local IP for netconn_addr()/getsockname() */ - if (ip_addr_isany(&pcb->local_ip) && !ip_addr_isany(&pcb->remote_ip)) { - struct netif *netif; - - if ((netif = ip_route(&(pcb->remote_ip))) == NULL) { - LWIP_DEBUGF(UDP_DEBUG, ("udp_connect: No route to 0x%lx\n", pcb->remote_ip.addr)); - UDP_STATS_INC(udp.rterr); - return ERR_RTE; - } - /** TODO: this will bind the udp pcb locally, to the interface which - is used to route output packets to the remote address. However, we - might want to accept incoming packets on any interface! */ - pcb->local_ip = netif->ip_addr; - } else if (ip_addr_isany(&pcb->remote_ip)) { - pcb->local_ip.addr = 0; - } -#endif - LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE, - ("udp_connect: connected to %"U16_F".%"U16_F".%"U16_F".%"U16_F",port %"U16_F"\n", - ip4_addr1_16(&pcb->local_ip), ip4_addr2_16(&pcb->local_ip), - ip4_addr3_16(&pcb->local_ip), ip4_addr4_16(&pcb->local_ip), - pcb->local_port)); - - /* Insert UDP PCB into the list of active UDP PCBs. */ - for (ipcb = udp_pcbs; ipcb != NULL; ipcb = ipcb->next) { - if (pcb == ipcb) { - /* already on the list, just return */ - return ERR_OK; - } - } - /* PCB not yet on the list, add PCB now */ - pcb->next = udp_pcbs; - udp_pcbs = pcb; - return ERR_OK; -} - -/** - * Disconnect a UDP PCB - * - * @param pcb the udp pcb to disconnect. - */ -void -udp_disconnect(struct udp_pcb *pcb) -{ - /* reset remote address association */ - ip_addr_set_any(&pcb->remote_ip); - pcb->remote_port = 0; - /* mark PCB as unconnected */ - pcb->flags &= ~UDP_FLAGS_CONNECTED; -} - -/** - * Set a receive callback for a UDP PCB - * - * This callback will be called when receiving a datagram for the pcb. - * - * @param pcb the pcb for wich to set the recv callback - * @param recv function pointer of the callback function - * @param recv_arg additional argument to pass to the callback function - */ -void -udp_recv(struct udp_pcb *pcb, udp_recv_fn recv, void *recv_arg) -{ - /* remember recv() callback and user data */ - pcb->recv = recv; - pcb->recv_arg = recv_arg; -} - -/** - * Remove an UDP PCB. - * - * @param pcb UDP PCB to be removed. The PCB is removed from the list of - * UDP PCB's and the data structure is freed from memory. - * - * @see udp_new() - */ -void -udp_remove(struct udp_pcb *pcb) -{ - struct udp_pcb *pcb2; - - snmp_delete_udpidx_tree(pcb); - /* pcb to be removed is first in list? */ - if (udp_pcbs == pcb) { - /* make list start at 2nd pcb */ - udp_pcbs = udp_pcbs->next; - /* pcb not 1st in list */ - } else { - for (pcb2 = udp_pcbs; pcb2 != NULL; pcb2 = pcb2->next) { - /* find pcb in udp_pcbs list */ - if (pcb2->next != NULL && pcb2->next == pcb) { - /* remove pcb from list */ - pcb2->next = pcb->next; - } - } - } - memp_free(MEMP_UDP_PCB, pcb); -} - -/** - * Create a UDP PCB. - * - * @return The UDP PCB which was created. NULL if the PCB data structure - * could not be allocated. - * - * @see udp_remove() - */ -struct udp_pcb * -udp_new(void) -{ - struct udp_pcb *pcb; - pcb = (struct udp_pcb *)memp_malloc(MEMP_UDP_PCB); - /* could allocate UDP PCB? */ - if (pcb != NULL) { - /* UDP Lite: by initializing to all zeroes, chksum_len is set to 0 - * which means checksum is generated over the whole datagram per default - * (recommended as default by RFC 3828). */ - /* initialize PCB to all zeroes */ - memset(pcb, 0, sizeof(struct udp_pcb)); - pcb->ttl = UDP_TTL; - } - return pcb; -} - -#if UDP_DEBUG -/** - * Print UDP header information for debug purposes. - * - * @param udphdr pointer to the udp header in memory. - */ -void -udp_debug_print(struct udp_hdr *udphdr) -{ - LWIP_DEBUGF(UDP_DEBUG, ("UDP header:\n")); - LWIP_DEBUGF(UDP_DEBUG, ("+-------------------------------+\n")); - LWIP_DEBUGF(UDP_DEBUG, ("| %5"U16_F" | %5"U16_F" | (src port, dest port)\n", - ntohs(udphdr->src), ntohs(udphdr->dest))); - LWIP_DEBUGF(UDP_DEBUG, ("+-------------------------------+\n")); - LWIP_DEBUGF(UDP_DEBUG, ("| %5"U16_F" | 0x%04"X16_F" | (len, chksum)\n", - ntohs(udphdr->len), ntohs(udphdr->chksum))); - LWIP_DEBUGF(UDP_DEBUG, ("+-------------------------------+\n")); -} -#endif /* UDP_DEBUG */ - -#endif /* LWIP_UDP */ |