# -*- shell-script -*-

catenate_cpiogz() {
	# Sanity check
	if [ ! -e "${1}" ]; then
		echo "W: catenate_cpiogz: arg1='${1}' does not exist." >&2
		return
	fi

	cat "${1}" >>"${__TMPCPIOGZ}"
}

force_load()
{
		manual_add_modules ${@}
		echo "${@}" >>"${DESTDIR}/conf/modules"
}

# Takes a file containing a list of modules to be added as an
# argument, figures out dependancies, and adds them.
#
# Input file syntax:
#
#   # comment
#   modprobe_module_name [args ...]
#   [...]
#
add_modules_from_file()
{
	# Sanity check
	if [ ! -e "${1}" ]; then
		echo "W: add_modules_from_file: arg1='${1}' does not exist." >&2
		return
	fi

	grep '^[^#]' ${1} | while read module args; do
		[ -n "$module" ] || continue
		force_load "${module}" "${args}"
	done
}

# Add dependent modules + eventual firmware
manual_add_modules()
{
	local kmod firmware

	for kmod in $(modprobe --set-version="${version}" --ignore-install \
	--quiet --show-depends "${1}" | awk '/^insmod/ { print $2 }'); do
		# Prune duplicates
		if [ -e "${DESTDIR}/${kmod}" ]; then
			continue
		fi

		mkdir -p "${DESTDIR}/$(dirname "${kmod}")"
		ln -s "${kmod}" "${DESTDIR}/$(dirname "${kmod}")"
		if [ "${verbose}" = "y" ]; then
			echo "Adding module ${kmod}"
		fi

		# Add required firmware
		for firmware in $(modinfo -F firmware "${kmod}"); do
			if [ -e "${DESTDIR}/lib/firmware/${firmware}" ] \
			|| [ -e "${DESTDIR}/lib/firmware/${version}/${firmware}" ]; then
				continue
			fi

			# Only print warning for missing fw of loaded module
			# or forced loaded module
			if [ ! -e "/lib/firmware/${firmware}" ] \
			&& [ ! -e "/lib/firmware/${version}/${firmware}" ] ; then
				# Only warn about missing firmware if
				# /proc/modules exists
				if [ ! -e /proc/modules ] ; then
					continue
				fi

				if grep -q "^$(basename "${kmod}" .ko)[[:space:]]" \
				/proc/modules \
				|| grep -q "^$(basename "${kmod}" .ko)" \
				"${CONFDIR}/modules"; then
					echo "W: Possible missing firmware /lib/firmware/${firmware} for module $(basename ${kmod} .ko)" >&2
				fi
				continue
			fi

			if [ ! -e "${DESTDIR}/lib/udev/firmware.agent" ] \
			&& [ -e "/lib/udev/firmware.agent" ]; then
				copy_exec /lib/udev/firmware.agent
			fi

			if [ -e "/lib/firmware/${version}/${firmware}" ]; then
				copy_exec "/lib/firmware/${version}/${firmware}"
			else
				copy_exec "/lib/firmware/${firmware}"
			fi
			if [ "${verbose}" = "y" ]; then
				echo "Adding firmware ${firmware}"
			fi
		done
	done
}

# $1 = file to copy to ramdisk
# $2 (optional) Name for the file on the ramdisk
# Location of the image dir is assumed to be $DESTDIR
# We never overwrite the target if it exists.
copy_exec() {
	local src target x nonoptlib
	local libname dirname

	src="${1}"
	target="${2:-$1}"

	[ -f "${src}" ] || return 1

	if [ -d "${DESTDIR}/${target}" ]; then
		# check if already copied
		[ -e "${DESTDIR}/$target/${src##*/}" ] && return 0
	else
		[ -e "${DESTDIR}/$target" ] && return 0
		#FIXME: inst_dir
		mkdir -p "${DESTDIR}/${target%/*}"
	fi

	[ "${verbose}" = "y" ] && echo "Adding binary ${src}"
	ln -s "${src}" "${DESTDIR}/${target}"

	# Copy the dependant libraries
	for x in $(ldd ${src} 2>/dev/null | sed -e '
		/\//!d;
		/linux-gate/d;
		/=>/ {s/.*=>[[:blank:]]*\([^[:blank:]]*\).*/\1/};
		s/[[:blank:]]*\([^[:blank:]]*\) (.*)/\1/' 2>/dev/null); do

		# Try to use non-optimised libraries where possible.
		# We assume that all HWCAP libraries will be in tls,
		# sse2, vfp or neon.
		nonoptlib=$(echo "${x}" | sed -e 's#/lib/\(tls\|i686\|sse2\|neon\|vfp\).*/\(lib.*\)#/lib/\2#')

		if [ -e "${nonoptlib}" ]; then
			x="${nonoptlib}"
		fi

		libname=$(basename "${x}")
		dirname=$(dirname "${x}")

		# FIXME inst_lib
		mkdir -p "${DESTDIR}/${dirname}"
		if [ ! -e "${DESTDIR}/${dirname}/${libname}" ]; then
			ln -s "${x}" "${DESTDIR}/${dirname}"
			[ "${verbose}" = "y" ] && echo "Adding library ${x}" || true
		fi
	done
}

# Copy entire subtrees to the initramfs
copy_modules_dir()
{
	local kmod exclude
	local dir="$1"
	shift

	if ! [ -d "${MODULESDIR}/${dir}" ]; then
		return;
	fi
	if [ "${verbose}" = "y" ]; then
		echo "Copying module directory ${dir}"
		if [ $# -ge 1 ]; then
			echo "(excluding $*)"
		fi
	fi
	while [ $# -ge 1 ]; do
		exclude="${exclude:-} -name $1 -prune -o "
		shift
	done
	for kmod in $(find "${MODULESDIR}/${dir}" ${exclude:-} -name '*.ko' -print); do
		manual_add_modules $(basename ${kmod} .ko)
	done
}

# walk /sys for relevant modules
sys_walk_mod_add()
{
	local driver_path module
	device_path="$1"

	while [ "${device_path}" != "/sys" ]; do
		sys_walk_modalias ${device_path}
		driver_path="$(readlink -f ${device_path}/driver/module)"
		if [ -e "$driver_path" ]; then
			module="$(basename $(readlink -f $driver_path))"
			if [ -n "${module}" ]; then
				force_load "${module}"
			fi
		fi
		device_path="$(dirname ${device_path})"
	done
}

# walk /sys for relevant modalias
sys_walk_modalias()
{
	local device_path modalias

	device_path="$(dirname "${1}")"
	device_path="$(dirname "${device_path}")"
	if [ -e "${device_path}/modalias" ]; then
		modalias=$(cat "${device_path}/modalias")
	fi

	if [ -n "${modalias}" ]; then
		force_load "${modalias}"
	fi
}

# find and only copy root relevant modules
dep_add_modules()
{
	local block minor root FSTYPE root_dev_path x

	# require mounted sysfs
	if [ ! -d /sys/devices/ ]; then
		echo "mkinitramfs: MODULES dep requires mounted sysfs on /sys" >&2
		exit 1
	fi

	# findout root block device + fstype
	eval "$(mount | awk '/\/dev\// {if ($3 == "/") {print "root=" $1 "\nFSTYPE=" $5; exit}}')"
	if [ -z "$root" ]; then
		echo "mkinitramfs: failed to determine root device" >&2
		echo "mkinitramfs: workaround is MODULES=most" >&2
		echo "Error please report bug on initramfs-tools and include the output of 'mount'" >&2
		exit 1
	fi

	# handle ubifs and return since ubifs root is a char device but
	# most of the commands below only work with block devices.
	if [ "${FSTYPE}" = "ubifs" ]; then
		manual_add_modules "${FSTYPE}"
		# add some modules required by ubifs on which it doesn's depend
		manual_add_modules deflate
		manual_add_modules zlib
		manual_add_modules lzo
		return
	fi

	if [ "${root}" = "/dev/root" ] ; then
		root="/dev/disk/by-uuid/"$(blkid -o value -s UUID ${root}) 2>/dev/null
	fi
	root="$(readlink -f ${root})"

	# do not trust mount, check superblock
	eval "$(/usr/lib/klibc/bin/fstype ${root})"

	# check that fstype rootfs recognition
	if [ "${FSTYPE}" = "unknown" ]; then
		FSTYPE=$(blkid -o value -s TYPE "${root}")
		if [  -z "${FSTYPE}" ]; then
			echo "mkinitramfs: unknown fstype on root ${root}" >&2
			echo "mkinitramfs: workaround is MODULES=most" >&2
			echo "Error please report bug on initramfs-tools" >&2
			exit 1
		fi
	fi

	# Add rootfs
	manual_add_modules "${FSTYPE}"

	# lvm or luks root
	if [ "${root#/dev/mapper/}" != "${root}" ] \
		|| [ "${root#/dev/dm-}" != "${root}" ]; then
		minor=$((0x$(stat --format "%T" ${root}) % 256))
		block=$(ls -1 /sys/block/dm-${minor}/slaves | head -n 1)
		# lvm on luks or luks on lvm, possibly lvm snapshots
		while [ "${block#dm-}" != "${block}" ]; do
			block=$(ls -1 /sys/block/${block}/slaves | head -n 1)
		done
		# lvm on md or luks on md
		if [ "${block#md}" != "${block}" ]; then
			block=$(sed -ne 's/multipath/[/' -e 's/linear/[/' -e 's/raid[0-9][0-9]*/[/' -e 's/\([hs]d[a-z][a-z]*\)[0-9][0-9]*/\1/g' -e '/^'${block}' :/s/^[^[]*\[ \([^\[]*\)\[.*$/\1/p' </proc/mdstat)
		fi
		# luks or lvm on cciss or ida
		if [ "${block#cciss}" != "${block}" ] \
		|| [ "${block#ida}" != "${block}" ]; then
			block="${block%p*}"
		else
			block=${block%%[0-9]*}
		fi
	# md root new naming scheme /dev/md/X
	elif [ "${root#/dev/md/}" != "${root}" ]; then
		root=${root#/dev/md/}
		# drop the partition number only for sdX and hdX devices
		# and keep it for other devices like loop#, dm-# devices
		block=$(sed -ne 's/multipath/[/' -e 's/linear/[/' -e 's/raid[0-9][0-9]*/[/' -e 's/\([hs]d[a-z][a-z]*\)[0-9][0-9]*/\1/g' -e '/^md'$root' :/s/^[^[]*\[ \([^\[]*\)\[.*$/\1/p' </proc/mdstat)
	# md root /dev/mdX
	elif [ "${root#/dev/md}" != "${root}" ]; then
		root=${root#/dev/md}
		# drop the partition number only for sdX and hdX devices
		# and keep it for other devices like loop#, dm-# devices
		block=$(sed -ne 's/multipath/[/' -e 's/linear/[/' -e 's/raid[0-9][0-9]*/[/' -e 's/\([hs]d[a-z][a-z]*\)[0-9][0-9]*/\1/g' -e '/^md'$root' :/s/^[^[]*\[ \([^\[]*\)\[.*$/\1/p' </proc/mdstat)
	# cciss device
	elif [ "${root#/dev/cciss/}" != "${root}" ]; then
		block=${root#/dev/cciss/*}
		block="cciss!${block%p*}"
	# ida device
	elif [ "${root#/dev/ida/}" != "${root}" ]; then
		block=${root#/dev/ida/*}
		block="ida!${block%p*}"
	# loop root /dev/loopX
	elif [ "${root#/dev/loop}" != "${root}" ]; then
		root=${root#/dev/}
		block=$(losetup -a \
			| awk "/${root}/{print substr(\$3, 7, 3); exit}")
	# Xen virtual device /dev/xvdX
	elif [ "${root#/dev/xvd}" != "${root}" ]; then
		block=${root#/dev/}
		# Xen has a mode where only the individual partitions are
		# registered with the kernel as well as the usual full disk
		# with partition table scheme.
		if [ ! -e /sys/block/${block} ] ; then
			block=${block%%[0-9]*}
		fi
	# mmc root /dev/mmcblkXpX
	elif [ "${root#/dev/mmcblk}" != "${root}" ]; then
		block=${root#/dev/}
		block=${block%%p[0-9]*}

	# DAC960 - good old mylex raid - root dev format /dev/rd/cXdXpX
	elif [ "${root#/dev/rd/c}" != "${root}" ]; then
		block="rd!c${root#/dev/rd/c}"
		block=${block%%p[0-9]*}

	# classical root device
	else
		block=${root#/dev/}
		block=${block%%[0-9]*}
	fi

	# Error out if /sys lack block dev
	if [ -z "${block}" ] || [ ! -e /sys/block/${block} ]; then
		echo "mkinitramfs: for root ${root} missing ${block} /sys/block/ entry" >&2
		echo "mkinitramfs: workaround is MODULES=most" >&2
		echo "mkinitramfs: Error please report the bug" >&2
		exit 1
	fi

	# sys walk ATA
	root_dev_path=$(readlink -f /sys/block/${block}/device)
	sys_walk_mod_add ${root_dev_path}

	# catch old-style IDE
	if [ -e /sys/bus/ide/devices/ ]; then
		sys_walk_modalias ${root_dev_path}
		manual_add_modules ide-gd_mod
		# FIXME: remove post Squeeze
		manual_add_modules ide-disk
		manual_add_modules ide-cd
	fi

	if [ -e /sys/bus/scsi/devices/ ]; then
		manual_add_modules sd_mod
	fi

	if [ -e /sys/bus/mmc/devices/ ]; then
		manual_add_modules mmc_block
	fi

	if [ -e /sys/bus/virtio ] ; then
		manual_add_modules virtio_pci
	fi

	if [ -e /sys/bus/i2o/devices/ ]; then
		force_load i2o_block
		force_load i2o_config
	fi

	if [ -e /sys/bus/ps3_system_bus/ ]; then
		for x in ps3disk ps3rom ps3-gelic ps3_sys_manager; do
			manual_add_modules "${x}"
		done
	fi

	if [ -e /sys/bus/vio/ ]; then
		for x in sunvnet sunvdc; do
			manual_add_modules "${x}"
		done
	fi
}


# The modules "most" classes added per default to the initramfs
auto_add_modules()
{
	case "${1:-}" in
	base)
		for x in ehci-hcd ohci-hcd uhci-hcd usbhid xhci hid-apple \
		hid-cherry hid-logitech hid-microsoft \
		btrfs ext2 ext3 ext4 ext4dev isofs jfs nfs reiserfs udf xfs \
		af_packet atkbd i8042 virtio_pci; do
			manual_add_modules "${x}"
		done
	;;
	net)
		for x in 3c59x 8139cp 8139too 8390 atl1 atl1e b44 bmac \
		bnx2 bnx2x cxgb cxgb3 de2104x de4x5 defxx dl2k dmfe \
		e100 e1000 e1000e ehea epic100 \
		ep93xx_eth eql fealnx famachi forcedeth gelic_net \
		hp100 igb ipg ixgb ixgbe mace mlx4_core mv643xx_eth myri10ge \
		natsemi ne2k-pci netconsole netxen_nic niu ns83820 \
		pcnet32 qla3xxx \
		r8169 s2io sfc sis900 skge sky2 slhc smc911x starfire \
		sundance sungem sungem_phy sunhme sunvnet tehuti tg3 tlan \
		tulip typhoon via-rhine via-velocity winbond-840 \
		xircom_cb xircom_tulip_cb yellowfin; do
			manual_add_modules "${x}"
		done
		copy_modules_dir kernel/drivers/net \
			appletalk arcnet bonding can hamradio irda pcmcia \
			tokenring usb wan wimax wireless
	;;
	ide)
		copy_modules_dir kernel/drivers/ide
	;;
	mmc)
		copy_modules_dir kernel/drivers/mmc
	;;
	scsi)
		copy_modules_dir kernel/drivers/scsi
		for x in mptfc mptsas mptscsih mptspi zfcp; do
			manual_add_modules "${x}"
		done
	;;
	ata)
		copy_modules_dir kernel/drivers/ata
	;;
	block)
		copy_modules_dir kernel/drivers/block
	;;
	ubi)
		for x in deflate zlib lzo ubi ubifs; do
			manual_add_modules "${x}"
		done
	;;
	ieee1394)
		for x in ohci1394 sbp2; do
			manual_add_modules "${x}"
		done
	;;
	firewire)
		for x in firewire-ohci  firewire-sbp2; do
			manual_add_modules "${x}"
		done
	;;
	i2o)
		for x in i2o_block; do
			manual_add_modules "${x}"
		done
	;;
	dasd)
		for x in dasd_diag_mod dasd_eckd_mod dasd_fba_mod; do
			manual_add_modules "${x}"
		done
	;;
	usb_storage)
		copy_modules_dir kernel/drivers/usb/storage
	;;
	*)
		auto_add_modules base
		auto_add_modules net
		auto_add_modules ide
		auto_add_modules scsi
		auto_add_modules block
		auto_add_modules ata
		auto_add_modules i2o
		auto_add_modules dasd
		auto_add_modules ieee1394
		auto_add_modules firewire
		auto_add_modules mmc
		auto_add_modules usb_storage
	;;
	esac
}

# mkinitramfs help message
usage()
{
	cat >&2 << EOF

Usage: ${0} [OPTION]... -o outfile [version]

Options:
  -c compress	Override COMPRESS setting in initramfs.conf.
  -d confdir	Specify an alternative configuration directory.
  -k		Keep temporary directory used to make the image.
  -o outfile	Write to outfile.
  -r root	Override ROOT setting in initramfs.conf.

See mkinitramfs(8) for further details.
EOF
	exit 1

}

# cache boot scripts order
cache_run_scripts()
{
	DESTDIR=${1}
	scriptdir=${2}
	initdir=${DESTDIR}${scriptdir}
	[ ! -d ${initdir} ] && return

	runlist=$(get_prereq_pairs | tsort)
	for crs_x in ${runlist}; do
		[ -f ${initdir}/${crs_x} ] || continue
		echo "${scriptdir}/${crs_x}" >> ${initdir}/ORDER
		echo "[ -e /conf/param.conf ] && . /conf/param.conf" >> ${initdir}/ORDER
	done
}

# minimal supported kernel version
check_minkver()
{
	local curversion initdir DPKG_ARCH minversion cm_x tmp

	curversion="${1:-}"
	initdir="${2:-}"
	if [ -z "${initdir}" ]; then
		case ${DPKG_ARCH:-} in
			ia64|hppa)
				minversion="2.6.15"
			;;
			*)
				minversion="2.6.12"
			;;
		esac
		if dpkg --compare-versions "${curversion}" lt "${minversion}"; then
			echo "W: kernel ${curversion} too old for initramfs on ${DPKG_ARCH}" >&2
			echo "W: not generating requested initramfs for kernel ${curversion}" >&2
			exit 2
		fi
		return 0
	fi
	set_initlist
	for cm_x in ${initlist:-}; do
		# sed:  keep last line starting with MINKVER=,
		#	remove MINKVER= and trailing space
		minver=$(sed '/^MINKVER=/!d;$!d;s/^MINKVER=//;s/[[:space:]]*$//' "${initdir}/${cm_x}")
		if [ -z "${tmp:-}" ]; then
			continue
		elif dpkg --compare-versions "${curversion}" lt "${minver}"; then
			echo "W: ${cm_x} hook script requires at least kernel version ${minver}" >&2
			echo "W: not generating requested initramfs for kernel ${curversion}" >&2
			exit 2
		fi
	done
}