Move interface support from vyatta-cfg to vyatta-cfg-system

All the other interface types are in vyatta-cfg-system, only
loopback and ethernet were in vyatta-cfg

17 files changed, 217 insertions, 0 deletions

diff --git a/templates/interfaces/ethernet/node.def b/templates/interfaces/ethernet/node.def
new file mode 100644
index 00000000..a46ae722
--- /dev/null
+++ b/templates/interfaces/ethernet/node.def
@@ -0,0 +1,11 @@
+tag:
+priority: 318
+type: txt
+help: Set ethernet interface
+syntax:expression: exec \
+   "/opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(@) --check=ethernet"
+allowed: /opt/vyatta/sbin/vyatta-interfaces.pl --show=ethernet
+create: sudo ip link set "$VAR(@)" up
+	/opt/vyatta/sbin/vyatta-link-detect $VAR(@) on
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+        sudo ip link set $VAR(@) down
diff --git a/templates/interfaces/ethernet/node.tag/address/node.def b/templates/interfaces/ethernet/node.tag/address/node.def
new file mode 100644
index 00000000..db87ff05
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/address/node.def
@@ -0,0 +1,28 @@
+multi:
+
+type: txt
+
+help: Set an IP address for this interface
+
+# Syntax check at "set" time.  Give curent address value to script
+# so that it can perform syntax check.
+#
+syntax:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-set $VAR(@) --dev $VAR(../@)"\
+     ; "Invalid IP address/prefix [$VAR(@)] for interface $VAR(../@)"
+
+# Syntax check at "commit" time.  Pass all address values to script so that
+# it can perform consistency check.
+#
+commit:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-commit $VAR(@@) --dev $VAR(../@)"
+
+create:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-update $VAR(@) --dev $VAR(../@)
+
+delete:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-delete $VAR(@) --dev $VAR(../@)
+
+allowed: echo "dhcp <>"
+
+comp_help:Possible completions:
+  <x.x.x.x/x>		Set the IP address and prefix length
+  <h:h:h:h:h:h:h:h/x>   Set the IPv6 address and prefix length
+  dhcp			Set the IP address and prefix length via DHCP
+
diff --git a/templates/interfaces/ethernet/node.tag/description/node.def b/templates/interfaces/ethernet/node.tag/description/node.def
new file mode 100644
index 00000000..7f64c788
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/description/node.def
@@ -0,0 +1,4 @@
+type: txt
+help: Set description for this interface
+update: sudo sh -c "echo \"$VAR(@)\" >/sys/class/net/$VAR(../@)/ifalias"
+delete: sudo sh -c "echo '' >/sys/class/net/$VAR(../@)/ifalias"
diff --git a/templates/interfaces/ethernet/node.tag/disable-flow-control/node.def b/templates/interfaces/ethernet/node.tag/disable-flow-control/node.def
new file mode 100644
index 00000000..10c6c066
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/disable-flow-control/node.def
@@ -0,0 +1,4 @@
+help: Set to disable Ethernet flow control (pause frames)
+create: sudo ethtool --pause $VAR(../@) autoneg off tx off rx off
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+	sudo ethtool --pause $VAR(../@) autoneg on tx on rx on
diff --git a/templates/interfaces/ethernet/node.tag/disable-link-detect/node.def b/templates/interfaces/ethernet/node.tag/disable-link-detect/node.def
new file mode 100644
index 00000000..83858ec1
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/disable-link-detect/node.def
@@ -0,0 +1,3 @@
+help: Set to ignore link state changes on this interface
+update:/opt/vyatta/sbin/vyatta-link-detect $VAR(../@) on
+delete:/opt/vyatta/sbin/vyatta-link-detect $VAR(../@) off
diff --git a/templates/interfaces/ethernet/node.tag/disable/node.def b/templates/interfaces/ethernet/node.tag/disable/node.def
new file mode 100644
index 00000000..fbfb155a
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/disable/node.def
@@ -0,0 +1,12 @@
+help: Set interface disabled
+create: /etc/netplug/linkdown.d/dhclient $VAR(../@)
+        if ! sudo ip link set $VAR(../@) down 2>/dev/null; then
+          echo "Error disabling dev $VAR(../@)"
+          /etc/netplug/linkup.d/dhclient $VAR(../@)
+          exit 1
+        fi
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+	if ! sudo ip link set $VAR(../@) up; then
+             echo "Error enabling dev $VAR(../@)"
+             exit 1
+        fi
diff --git a/templates/interfaces/ethernet/node.tag/duplex/node.def b/templates/interfaces/ethernet/node.tag/duplex/node.def
new file mode 100644
index 00000000..9277729d
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/duplex/node.def
@@ -0,0 +1,13 @@
+type: txt
+help: Set the duplex mode for this interface
+default: "auto"
+syntax:expression: $VAR(@) in "auto", "half", "full"; "duplex must be auto, half or full"
+commit:expression: ( $VAR(@) == "auto" && $VAR(../speed/@) == "auto" ) || \
+		   ( $VAR(@) != "auto" && $VAR(../speed/@) != "auto" ) ; \
+	"if duplex is hardcoded, speed must also be hardcoded"
+update: /opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(../@) \
+	--speed-duplex $VAR(../speed/@) $VAR(@)
+comp_help:Possible completions:
+  auto\t\tAuto negotiation (default)
+  half\t\tHalf duplex
+  full\t\tFull duplex
diff --git a/templates/interfaces/ethernet/node.tag/hw-id/node.def b/templates/interfaces/ethernet/node.tag/hw-id/node.def
new file mode 100644
index 00000000..6c559f89
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/hw-id/node.def
@@ -0,0 +1,2 @@
+type: macaddr
+help: Set the Media Access Control (MAC) address of this interface
diff --git a/templates/interfaces/ethernet/node.tag/mac/node.def b/templates/interfaces/ethernet/node.tag/mac/node.def
new file mode 100644
index 00000000..55264cf7
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/mac/node.def
@@ -0,0 +1,8 @@
+type: macaddr
+help: Set the Media Access Control (MAC) address of this interface
+syntax:expression: exec "\
+	/opt/vyatta/sbin/vyatta-interfaces.pl --dev $VAR(../@) --valid-mac $VAR(@)"
+update: /opt/vyatta/sbin/vyatta-interfaces.pl --dev $VAR(../@) --set-mac $VAR(@)
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+        /opt/vyatta/sbin/vyatta-interfaces.pl --dev $VAR(../@) --set-mac $VAR(../hw-id/@)
+
diff --git a/templates/interfaces/ethernet/node.tag/mtu/node.def b/templates/interfaces/ethernet/node.tag/mtu/node.def
new file mode 100644
index 00000000..dc03ae16
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/mtu/node.def
@@ -0,0 +1,8 @@
+type: u32
+help: Set the Maximum Transmission Unit (MTU) for this interface
+syntax:expression: $VAR(@) >= 68 && $VAR(@) <= 9000; "MTU must be between 68 and 9000"
+update: if ! sudo ip link set $VAR(../@) mtu $VAR(@)
+        then echo "Error setting MTU on dev $VAR(../@)"; exit 1
+        fi
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+        sudo ip link set $VAR(../@) mtu 1500
diff --git a/templates/interfaces/ethernet/node.tag/smp_affinity/node.def b/templates/interfaces/ethernet/node.tag/smp_affinity/node.def
new file mode 100644
index 00000000..a444ae92
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/smp_affinity/node.def
@@ -0,0 +1,45 @@
+#
+#
+# Configuration template for interface.ethernet.name.smp_affinity
+#
+# Configure the CPUs that the associated interface will interrupt.
+# SMP affinity is configured by a hexidecimal bitmask that specifies the
+# CPUs that the system can interrupt.  The SMP affinity bitmask must contain
+# at least one bits, and may only contain as many bits as there are CPUs on
+# the system.
+#
+
+type: txt
+
+help: Set CPU interrupt affinity mask for this interface
+
+comp_help: Possible completions:
+  XX\tHexidecimal bitmask representing CPUs that this NIC will interrupt
+  auto\tSet affinity automatically
+
+default: "auto"
+
+syntax:expression: exec " \
+	if [ $VAR(@) = auto ]; then \
+		exit 0;
+	else \
+		/opt/vyatta/sbin/vyatta-irqaffin check $VAR(../@) $VAR(@); \
+        fi"
+
+update:
+	if [ "$VAR(@)" = "auto" ]; then
+	    echo "Setting SMP affinity for $VAR(../@) automatically."
+	    sudo /opt/vyatta/sbin/vyatta-auto-irqaffin.pl --setup $VAR(../@)
+	else
+	    sudo /opt/vyatta/sbin/vyatta-irqaffin set $VAR(../@) $VAR(@)
+	    if [ $? -ne 0 ]; then
+		echo "Error setting CPU affinity mask $VAR(@) on interface $VAR(../@)"
+		exit 1
+	    fi
+	fi
+
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+	if ! sudo /opt/vyatta/sbin/vyatta-irqaffin reset $VAR(../@); then
+	    echo "Error deleting CPU affinity mask on interface $VAR(../@)"
+	    exit 1
+	fi
diff --git a/templates/interfaces/ethernet/node.tag/speed/node.def b/templates/interfaces/ethernet/node.tag/speed/node.def
new file mode 100644
index 00000000..e822df9f
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/speed/node.def
@@ -0,0 +1,16 @@
+type: txt
+help: Set the speed for this interface
+default: "auto"
+syntax:expression: $VAR(@) in "auto", "10", "100", "1000", "2500", "10000"; "Speed must be auto, 10, 100, 1000, 2500, or 10000"
+commit:expression: ( $VAR(@) == "auto" && $VAR(../duplex/@) == "auto" ) || \
+		   ( $VAR(@) != "auto" && $VAR(../duplex/@) != "auto" ) ; \
+              "if speed is hardcoded, duplex must also be hardcoded"
+update: /opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(../@) \
+	--speed-duplex $VAR(@) $VAR(../duplex/@)
+comp_help:Possible completions:
+  auto\t\tAuto negotiation (default)
+  10  \t\t10 Mbit/sec
+  100 \t\t100 Mbit/sec
+  1000\t\t1 Gbit/sec
+  2500\t\t2.5 Gbit/sec
+  10000\t10 Gbit/sec
diff --git a/templates/interfaces/ethernet/node.tag/vif/node.def b/templates/interfaces/ethernet/node.tag/vif/node.def
new file mode 100644
index 00000000..610c0e5e
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/vif/node.def
@@ -0,0 +1,18 @@
+tag:
+priority: 319
+type: u32
+help: Set Virtual Local Area Network (VLAN) ID
+syntax:expression: $VAR(@) >= 0 && $VAR(@) <= 4094; "VLAN ID must be between 0 and 4094"
+create: if ! sudo ip link add link $VAR(../@) name "$VAR(../@).$VAR(@)" type vlan id $VAR(@)
+	then echo "Error creating VLAN device $VAR(../@).$VAR(@)"
+	     exit 1
+        fi
+	if /opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(../@) --isup
+	then
+	    sudo ip link set "$VAR(../@).$VAR(@)" up 
+	fi
+	/opt/vyatta/sbin/vyatta-link-detect "$VAR(../@).$VAR(@)" on
+delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0
+        sudo ip link delete dev "$VAR(../@).$VAR(@)" type vlan id $VAR(@)
+comp_help: possible completions:
+ <0-4094>           Set VLAN ID
diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/address/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/address/node.def
new file mode 100644
index 00000000..a5edef6d
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/address/node.def
@@ -0,0 +1,27 @@
+multi:
+
+type: txt
+
+help: Set an IP address for this interface
+
+# Syntax check at "set" time.  Give curent address value to script
+# so that it can perform syntax check.
+#
+syntax:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-set $VAR(@) --dev $VAR(../../@).$VAR(../@) "\
+       ; "Invalid IP address/prefix [$VAR(@)] for interface $VAR(../../@).$VAR(../@)"
+
+# Syntax check at "commit" time.  Pass all address values to script so that
+# it can perform consistency check.
+#
+commit:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-commit $VAR(@@) --dev $VAR(../../@).$VAR(../@)"
+
+create:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-update $VAR(@) --dev $VAR(../../@).$VAR(../@)
+
+delete:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-delete $VAR(@) --dev $VAR(../../@).$VAR(../@)
+
+allowed: echo "dhcp <>"
+
+comp_help:Possible completions:
+  <x.x.x.x/x>		Set the IP address and prefix length
+  <h:h:h:h:h:h:h:h/x>   Set the IPv6 address and prefix length
+  dhcp			Set the IP address and prefix length via DHCP
diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/description/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/description/node.def
new file mode 100644
index 00000000..0ef54891
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/description/node.def
@@ -0,0 +1,4 @@
+type: txt
+help: Set description for this interface
+update: sudo sh -c "echo \"$VAR(@)\" >/sys/class/net/$VAR(../../@).$VAR(../@)/ifalias"
+delete: sudo sh -c "echo '' >/sys/class/net/$VAR(../../@).$VAR(../@)/ifalias"
diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/disable-link-detect/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable-link-detect/node.def
new file mode 100644
index 00000000..897113de
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable-link-detect/node.def
@@ -0,0 +1,3 @@
+help: Set to ignore link state changes on this interface
+update:/opt/vyatta/sbin/vyatta-link-detect $VAR(../../@).$VAR(../@) on
+delete:/opt/vyatta/sbin/vyatta-link-detect $VAR(../../@).$VAR(../@) off
diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/disable/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable/node.def
new file mode 100644
index 00000000..78b24870
--- /dev/null
+++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable/node.def
@@ -0,0 +1,11 @@
+help: Set interface disabled
+update: /etc/netplug/linkdown.d/dhclient $VAR(../../@).$VAR(../@)
+        if ! sudo ip link set $VAR(../../@).$VAR(../@) down 2>/dev/null; then
+          echo "Error disabling dev $VAR(../../@).$VAR(../@)"
+          /etc/netplug/linkup.d/dhclient $VAR(../../@).$VAR(../@)
+          exit 1
+        fi
+delete: if ! sudo ip link set $VAR(../../@).$VAR(../@) up; then
+          echo "Error enabling dev $VAR(../../@).$VAR(../@)"
+          exit 1
+        fi