Add IPv6 support to bgp cli.

7 files changed, 105 insertions, 30 deletions

diff --git a/templates/protocols/bgp/node.tag/ipv6/aggregate-address/node.def b/templates/protocols/bgp/node.tag/ipv6/aggregate-address/node.def
new file mode 100644
index 00000000..cb260727
--- /dev/null
+++ b/templates/protocols/bgp/node.tag/ipv6/aggregate-address/node.def
@@ -0,0 +1,23 @@
+tag:
+type: ipv6net
+help: Set a BGP IPv6 aggregate network
+comp_help:
+  <h:h:h:h:h:h:h:h/x>     IPv6 aggregate network
+
+syntax:expression: exec "${vyatta_sbindir}/check_prefix_boundary $VAR(@)"
+
+delete: touch /tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID 
+
+end:  vyatta-vtysh -n -c "configure terminal" \
+                      -c "router bgp $VAR(../../@)" \
+                      -c "no ipv6 bgp aggregate-address $VAR(@)"; 
+      if [ -f "/tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID" ]; then 
+        rm -rf /tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID; 
+      else 
+        if [ -n "$VAR(./summary-only)" ]; then
+          cond="$cond summary-only"; 
+        fi;
+        vyatta-vtysh -c "configure terminal"    \
+                     -c "router bgp $VAR(../../@)" \
+                     -c "ipv6 bgp aggregate-address $VAR(@) $cond"; 
+      fi; 
diff --git a/templates/protocols/bgp/node.tag/ipv6/aggregate-address/node.tag/summary-only/node.def b/templates/protocols/bgp/node.tag/ipv6/aggregate-address/node.tag/summary-only/node.def
new file mode 100644
index 00000000..7aaf0620
--- /dev/null
+++ b/templates/protocols/bgp/node.tag/ipv6/aggregate-address/node.tag/summary-only/node.def
@@ -0,0 +1 @@
+help: Set to announce the aggregate summary network only
diff --git a/templates/protocols/bgp/node.tag/ipv6/network/node.def b/templates/protocols/bgp/node.tag/ipv6/network/node.def
new file mode 100644
index 00000000..cfe2d8a7
--- /dev/null
+++ b/templates/protocols/bgp/node.tag/ipv6/network/node.def
@@ -0,0 +1,15 @@
+multi:
+type: ipv6net
+help: Set a BGP IPv6 network
+comp_help: 
+  <h:h:h:h:h:h:h:h/x>    IPv6 network
+
+syntax:expression: exec "${vyatta_sbindir}/check_prefix_boundary $VAR(@)"
+
+create: vyatta-vtysh -c "configure terminal"       \
+                     -c "router bgp $VAR(../../@)" \
+                     -c "ipv6 bgp network $VAR(@)";
+
+delete: vyatta-vtysh -c "configure terminal"       \
+                     -c "router bgp $VAR(../../@)" \
+                     -c "no ipv6 bgp network $VAR(@)";
diff --git a/templates/protocols/bgp/node.tag/ipv6/node.def b/templates/protocols/bgp/node.tag/ipv6/node.def
new file mode 100644
index 00000000..1a8f732e
--- /dev/null
+++ b/templates/protocols/bgp/node.tag/ipv6/node.def
@@ -0,0 +1 @@
+help: Set a BGP IPv6 settings
diff --git a/templates/protocols/bgp/node.tag/neighbor/node.def b/templates/protocols/bgp/node.tag/neighbor/node.def
index 4e2e2793..2699782b 100644
--- a/templates/protocols/bgp/node.tag/neighbor/node.def
+++ b/templates/protocols/bgp/node.tag/neighbor/node.def
@@ -1,10 +1,22 @@
 tag:
 type: txt
 help: Set a BGP neighbor 
-comp_help: \1  <x.x.x.x>\tBGP neighbor IP address
-syntax:expression: exec "/opt/vyatta/sbin/vyatta-bgp.pl --check-peer-name $VAR(@)"
-update:  if [ -n "`echo $VAR(@) | sed 's/[0-9]\{1,3\}.[0-9]\{1,3\}.[0-9]\{1,3\}.[0-9]\{1,3\}//'`" ]; then 
-           vyatta-vtysh -c "configure terminal" -c "router bgp $VAR(../@)" -c "neighbor $VAR(@) peer-group" ; 
-         fi ; 
-delete:  /opt/vyatta/sbin/vyatta-bgp.pl --check-peer-groups --peergroup $VAR(@) --as $VAR(../@); 
-         vyatta-vtysh -c "configure terminal" -c "router bgp $VAR(../@)" -c "no neighbor $VAR(@)"
+comp_help: 
+  <x.x.x.x>           BGP neighbor IP address
+  <h:h:h:h:h:h:h:h>   BGP neighbor IPv6 address
+
+syntax:expression: exec "/opt/vyatta/sbin/vyatta-bgp.pl \
+                           --check-peer-name $VAR(@)"
+
+update: if /opt/vyatta/sbin/vyatta-bgp.pl --check-if-peer-group \
+                                          --peergroup $VAR(@); then
+	   vyatta-vtysh -c "configure terminal"    \
+                        -c "router bgp $VAR(../@)" \
+                        -c "neighbor $VAR(@) peer-group"; 
+        fi;
+
+delete:  /opt/vyatta/sbin/vyatta-bgp.pl --check-peer-groups \
+                                        --peergroup $VAR(@) --as $VAR(../@); 
+         vyatta-vtysh -c "configure terminal"    \
+                      -c "router bgp $VAR(../@)" \
+                      -c "no neighbor $VAR(@)"
diff --git a/templates/protocols/bgp/node.tag/neighbor/node.tag/remote-as/node.def b/templates/protocols/bgp/node.tag/neighbor/node.tag/remote-as/node.def
index 10b33281..0381d22b 100644
--- a/templates/protocols/bgp/node.tag/neighbor/node.tag/remote-as/node.def
+++ b/templates/protocols/bgp/node.tag/neighbor/node.tag/remote-as/node.def
@@ -1,10 +1,33 @@
 type: u32
+priority: 1
 help: Set neighbor BGP AS number
-comp_help: \1  <1-4294967294>\tAS number
-syntax:expression: $VAR(@) >= 1 && $VAR(@) <= 4294967294; "remote-as must be between 1 and 4294967294"
-update: vyatta-vtysh -c "configure terminal" -c "router bgp $VAR(../../@)" \
-          -c "neighbor $VAR(../@) remote-as $VAR(@)"
-# commented out because deleting anything after remote-as will cause a failure in Quagga
-# this is a temporary fix until node ordering is enabled
-#delete: vyatta-vtysh -c "configure terminal" -c "router bgp $VAR(../../@)" \
-#          -c "no neighbor $VAR(../@) remote-as $VAR(@)"
+comp_help: 
+  <1-4294967294>    AS number
+
+syntax:expression: $VAR(@) >= 1 && $VAR(@) <= 4294967294; \
+                   "remote-as must be between 1 and 4294967294"
+
+update: vyatta-vtysh -c "configure terminal"       \
+                     -c "router bgp $VAR(../../@)" \
+                     -c "neighbor $VAR(../@) remote-as $VAR(@)";
+        if /opt/vyatta/sbin/vyatta-validate-type.pl -q ipv6 $VAR(../@)
+        then
+	   vyatta-vtysh -c "configure terminal"              \
+                        -c "router bgp $VAR(../../@)"        \
+                        -c "no neighbor $VAR(../@) activate" \
+                        -c "address-family ipv6"             \
+			-c "neighbor $VAR(../@) activate";
+        fi
+
+#remote-as needs to be set 1st & deleted last - comment out for now
+#delete: vyatta-vtysh -c "configure terminal"       \
+#                     -c "router bgp $VAR(../../@)" \
+#                     -c "no neighbor $VAR(../@) remote-as $VAR(@)";
+delete: if /opt/vyatta/sbin/vyatta-validate-type.pl -q ipv6 $VAR(../@)
+        then
+	   vyatta-vtysh -c "configure terminal"           \
+                        -c "router bgp $VAR(../../@)"     \
+                        -c "neighbor $VAR(../@) activate" \
+                        -c "address-family ipv6"          \
+			-c "no neighbor $VAR(../@) activate";
+        fi
diff --git a/templates/protocols/bgp/node.tag/network/node.def b/templates/protocols/bgp/node.tag/network/node.def
index fe253baa..e263d4e3 100644
--- a/templates/protocols/bgp/node.tag/network/node.def
+++ b/templates/protocols/bgp/node.tag/network/node.def
@@ -2,27 +2,27 @@ tag:
 type: ipv4net
 help: Set a BGP network
 comp_help: \1  <x.x.x.x/x>\tnetwork
+
 syntax:expression: exec "${vyatta_sbindir}/check_prefix_boundary $VAR(@)"
+
 commit:expression: !($VAR(./backdoor/) != "" && $VAR(./route-map/) != "");
        "protocols bgp $VAR(../@) network $VAR(@): May specify route-map or backdoor but not both"
+
 delete: touch /tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID
-end: vyatta-vtysh --noerror -c "configure terminal" -c "router bgp $VAR(../@)" -c "no network $VAR(@)";
 
-      if [ -f "/tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID" ]; then
+end: vyatta-vtysh -n -c "configure terminal"    \
+                     -c "router bgp $VAR(../@)" \
+                     -c "no network $VAR(@)";
+     if [ -f "/tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID" ]; then
         rm -rf /tmp/`echo $VAR(@) | sed 's!/!!'`.$PPID;
-      else
-        # uncomment and replace the call to vyatta-check-typeless-node.pl pending bug 2525
-        #if [ -n \"$VAR(./backdoor/)\" ]; then
-        #  COND=\"backdoor\";
-        #fi;
-        ${vyatta_sbindir}/vyatta-check-typeless-node.pl "protocols bgp $VAR(../@) network $VAR(@) backdoor";
-        if [ $? -eq 0 ]; then
-          cond="backdoor ";
-        fi ;
-
+     else
+        if [ -n "$VAR(./backdoor/)" ]; then
+          cond="backdoor";
+        fi;
         if [ -n "$VAR(./route-map/@)" ]; then
           cond="route-map $VAR(./route-map/@)";
         fi;
-
-        vyatta-vtysh -c "configure terminal" -c "router bgp $VAR(../@)" -c "network $VAR(@) $cond";
-      fi;
+        vyatta-vtysh -c "configure terminal"    \
+                     -c "router bgp $VAR(../@)" \
+                     -c "network $VAR(@) $cond";
+     fi;