diff options
Diffstat (limited to 'templates/interfaces/ethernet')
17 files changed, 217 insertions, 0 deletions
diff --git a/templates/interfaces/ethernet/node.def b/templates/interfaces/ethernet/node.def new file mode 100644 index 00000000..a46ae722 --- /dev/null +++ b/templates/interfaces/ethernet/node.def @@ -0,0 +1,11 @@ +tag: +priority: 318 +type: txt +help: Set ethernet interface +syntax:expression: exec \ + "/opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(@) --check=ethernet" +allowed: /opt/vyatta/sbin/vyatta-interfaces.pl --show=ethernet +create: sudo ip link set "$VAR(@)" up + /opt/vyatta/sbin/vyatta-link-detect $VAR(@) on +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + sudo ip link set $VAR(@) down diff --git a/templates/interfaces/ethernet/node.tag/address/node.def b/templates/interfaces/ethernet/node.tag/address/node.def new file mode 100644 index 00000000..db87ff05 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/address/node.def @@ -0,0 +1,28 @@ +multi: + +type: txt + +help: Set an IP address for this interface + +# Syntax check at "set" time. Give curent address value to script +# so that it can perform syntax check. +# +syntax:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-set $VAR(@) --dev $VAR(../@)"\ + ; "Invalid IP address/prefix [$VAR(@)] for interface $VAR(../@)" + +# Syntax check at "commit" time. Pass all address values to script so that +# it can perform consistency check. +# +commit:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-commit $VAR(@@) --dev $VAR(../@)" + +create:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-update $VAR(@) --dev $VAR(../@) + +delete:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-delete $VAR(@) --dev $VAR(../@) + +allowed: echo "dhcp <>" + +comp_help:Possible completions: + <x.x.x.x/x> Set the IP address and prefix length + <h:h:h:h:h:h:h:h/x> Set the IPv6 address and prefix length + dhcp Set the IP address and prefix length via DHCP + diff --git a/templates/interfaces/ethernet/node.tag/description/node.def b/templates/interfaces/ethernet/node.tag/description/node.def new file mode 100644 index 00000000..7f64c788 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/description/node.def @@ -0,0 +1,4 @@ +type: txt +help: Set description for this interface +update: sudo sh -c "echo \"$VAR(@)\" >/sys/class/net/$VAR(../@)/ifalias" +delete: sudo sh -c "echo '' >/sys/class/net/$VAR(../@)/ifalias" diff --git a/templates/interfaces/ethernet/node.tag/disable-flow-control/node.def b/templates/interfaces/ethernet/node.tag/disable-flow-control/node.def new file mode 100644 index 00000000..10c6c066 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/disable-flow-control/node.def @@ -0,0 +1,4 @@ +help: Set to disable Ethernet flow control (pause frames) +create: sudo ethtool --pause $VAR(../@) autoneg off tx off rx off +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + sudo ethtool --pause $VAR(../@) autoneg on tx on rx on diff --git a/templates/interfaces/ethernet/node.tag/disable-link-detect/node.def b/templates/interfaces/ethernet/node.tag/disable-link-detect/node.def new file mode 100644 index 00000000..83858ec1 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/disable-link-detect/node.def @@ -0,0 +1,3 @@ +help: Set to ignore link state changes on this interface +update:/opt/vyatta/sbin/vyatta-link-detect $VAR(../@) on +delete:/opt/vyatta/sbin/vyatta-link-detect $VAR(../@) off diff --git a/templates/interfaces/ethernet/node.tag/disable/node.def b/templates/interfaces/ethernet/node.tag/disable/node.def new file mode 100644 index 00000000..fbfb155a --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/disable/node.def @@ -0,0 +1,12 @@ +help: Set interface disabled +create: /etc/netplug/linkdown.d/dhclient $VAR(../@) + if ! sudo ip link set $VAR(../@) down 2>/dev/null; then + echo "Error disabling dev $VAR(../@)" + /etc/netplug/linkup.d/dhclient $VAR(../@) + exit 1 + fi +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + if ! sudo ip link set $VAR(../@) up; then + echo "Error enabling dev $VAR(../@)" + exit 1 + fi diff --git a/templates/interfaces/ethernet/node.tag/duplex/node.def b/templates/interfaces/ethernet/node.tag/duplex/node.def new file mode 100644 index 00000000..9277729d --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/duplex/node.def @@ -0,0 +1,13 @@ +type: txt +help: Set the duplex mode for this interface +default: "auto" +syntax:expression: $VAR(@) in "auto", "half", "full"; "duplex must be auto, half or full" +commit:expression: ( $VAR(@) == "auto" && $VAR(../speed/@) == "auto" ) || \ + ( $VAR(@) != "auto" && $VAR(../speed/@) != "auto" ) ; \ + "if duplex is hardcoded, speed must also be hardcoded" +update: /opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(../@) \ + --speed-duplex $VAR(../speed/@) $VAR(@) +comp_help:Possible completions: + auto\t\tAuto negotiation (default) + half\t\tHalf duplex + full\t\tFull duplex diff --git a/templates/interfaces/ethernet/node.tag/hw-id/node.def b/templates/interfaces/ethernet/node.tag/hw-id/node.def new file mode 100644 index 00000000..6c559f89 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/hw-id/node.def @@ -0,0 +1,2 @@ +type: macaddr +help: Set the Media Access Control (MAC) address of this interface diff --git a/templates/interfaces/ethernet/node.tag/mac/node.def b/templates/interfaces/ethernet/node.tag/mac/node.def new file mode 100644 index 00000000..55264cf7 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/mac/node.def @@ -0,0 +1,8 @@ +type: macaddr +help: Set the Media Access Control (MAC) address of this interface +syntax:expression: exec "\ + /opt/vyatta/sbin/vyatta-interfaces.pl --dev $VAR(../@) --valid-mac $VAR(@)" +update: /opt/vyatta/sbin/vyatta-interfaces.pl --dev $VAR(../@) --set-mac $VAR(@) +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + /opt/vyatta/sbin/vyatta-interfaces.pl --dev $VAR(../@) --set-mac $VAR(../hw-id/@) + diff --git a/templates/interfaces/ethernet/node.tag/mtu/node.def b/templates/interfaces/ethernet/node.tag/mtu/node.def new file mode 100644 index 00000000..dc03ae16 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/mtu/node.def @@ -0,0 +1,8 @@ +type: u32 +help: Set the Maximum Transmission Unit (MTU) for this interface +syntax:expression: $VAR(@) >= 68 && $VAR(@) <= 9000; "MTU must be between 68 and 9000" +update: if ! sudo ip link set $VAR(../@) mtu $VAR(@) + then echo "Error setting MTU on dev $VAR(../@)"; exit 1 + fi +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + sudo ip link set $VAR(../@) mtu 1500 diff --git a/templates/interfaces/ethernet/node.tag/smp_affinity/node.def b/templates/interfaces/ethernet/node.tag/smp_affinity/node.def new file mode 100644 index 00000000..a444ae92 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/smp_affinity/node.def @@ -0,0 +1,45 @@ +# +# +# Configuration template for interface.ethernet.name.smp_affinity +# +# Configure the CPUs that the associated interface will interrupt. +# SMP affinity is configured by a hexidecimal bitmask that specifies the +# CPUs that the system can interrupt. The SMP affinity bitmask must contain +# at least one bits, and may only contain as many bits as there are CPUs on +# the system. +# + +type: txt + +help: Set CPU interrupt affinity mask for this interface + +comp_help: Possible completions: + XX\tHexidecimal bitmask representing CPUs that this NIC will interrupt + auto\tSet affinity automatically + +default: "auto" + +syntax:expression: exec " \ + if [ $VAR(@) = auto ]; then \ + exit 0; + else \ + /opt/vyatta/sbin/vyatta-irqaffin check $VAR(../@) $VAR(@); \ + fi" + +update: + if [ "$VAR(@)" = "auto" ]; then + echo "Setting SMP affinity for $VAR(../@) automatically." + sudo /opt/vyatta/sbin/vyatta-auto-irqaffin.pl --setup $VAR(../@) + else + sudo /opt/vyatta/sbin/vyatta-irqaffin set $VAR(../@) $VAR(@) + if [ $? -ne 0 ]; then + echo "Error setting CPU affinity mask $VAR(@) on interface $VAR(../@)" + exit 1 + fi + fi + +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + if ! sudo /opt/vyatta/sbin/vyatta-irqaffin reset $VAR(../@); then + echo "Error deleting CPU affinity mask on interface $VAR(../@)" + exit 1 + fi diff --git a/templates/interfaces/ethernet/node.tag/speed/node.def b/templates/interfaces/ethernet/node.tag/speed/node.def new file mode 100644 index 00000000..e822df9f --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/speed/node.def @@ -0,0 +1,16 @@ +type: txt +help: Set the speed for this interface +default: "auto" +syntax:expression: $VAR(@) in "auto", "10", "100", "1000", "2500", "10000"; "Speed must be auto, 10, 100, 1000, 2500, or 10000" +commit:expression: ( $VAR(@) == "auto" && $VAR(../duplex/@) == "auto" ) || \ + ( $VAR(@) != "auto" && $VAR(../duplex/@) != "auto" ) ; \ + "if speed is hardcoded, duplex must also be hardcoded" +update: /opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(../@) \ + --speed-duplex $VAR(@) $VAR(../duplex/@) +comp_help:Possible completions: + auto\t\tAuto negotiation (default) + 10 \t\t10 Mbit/sec + 100 \t\t100 Mbit/sec + 1000\t\t1 Gbit/sec + 2500\t\t2.5 Gbit/sec + 10000\t10 Gbit/sec diff --git a/templates/interfaces/ethernet/node.tag/vif/node.def b/templates/interfaces/ethernet/node.tag/vif/node.def new file mode 100644 index 00000000..610c0e5e --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/vif/node.def @@ -0,0 +1,18 @@ +tag: +priority: 319 +type: u32 +help: Set Virtual Local Area Network (VLAN) ID +syntax:expression: $VAR(@) >= 0 && $VAR(@) <= 4094; "VLAN ID must be between 0 and 4094" +create: if ! sudo ip link add link $VAR(../@) name "$VAR(../@).$VAR(@)" type vlan id $VAR(@) + then echo "Error creating VLAN device $VAR(../@).$VAR(@)" + exit 1 + fi + if /opt/vyatta/sbin/vyatta-interfaces.pl --dev=$VAR(../@) --isup + then + sudo ip link set "$VAR(../@).$VAR(@)" up + fi + /opt/vyatta/sbin/vyatta-link-detect "$VAR(../@).$VAR(@)" on +delete: [ -d /sys/class/net/$VAR(../@) ] || exit 0 + sudo ip link delete dev "$VAR(../@).$VAR(@)" type vlan id $VAR(@) +comp_help: possible completions: + <0-4094> Set VLAN ID diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/address/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/address/node.def new file mode 100644 index 00000000..a5edef6d --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/address/node.def @@ -0,0 +1,27 @@ +multi: + +type: txt + +help: Set an IP address for this interface + +# Syntax check at "set" time. Give curent address value to script +# so that it can perform syntax check. +# +syntax:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-set $VAR(@) --dev $VAR(../../@).$VAR(../@) "\ + ; "Invalid IP address/prefix [$VAR(@)] for interface $VAR(../../@).$VAR(../@)" + +# Syntax check at "commit" time. Pass all address values to script so that +# it can perform consistency check. +# +commit:expression: exec "/opt/vyatta/sbin/vyatta-interfaces.pl --valid-addr-commit $VAR(@@) --dev $VAR(../../@).$VAR(../@)" + +create:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-update $VAR(@) --dev $VAR(../../@).$VAR(../@) + +delete:sudo /opt/vyatta/sbin/vyatta-interfaces.pl --eth-addr-delete $VAR(@) --dev $VAR(../../@).$VAR(../@) + +allowed: echo "dhcp <>" + +comp_help:Possible completions: + <x.x.x.x/x> Set the IP address and prefix length + <h:h:h:h:h:h:h:h/x> Set the IPv6 address and prefix length + dhcp Set the IP address and prefix length via DHCP diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/description/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/description/node.def new file mode 100644 index 00000000..0ef54891 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/description/node.def @@ -0,0 +1,4 @@ +type: txt +help: Set description for this interface +update: sudo sh -c "echo \"$VAR(@)\" >/sys/class/net/$VAR(../../@).$VAR(../@)/ifalias" +delete: sudo sh -c "echo '' >/sys/class/net/$VAR(../../@).$VAR(../@)/ifalias" diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/disable-link-detect/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable-link-detect/node.def new file mode 100644 index 00000000..897113de --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable-link-detect/node.def @@ -0,0 +1,3 @@ +help: Set to ignore link state changes on this interface +update:/opt/vyatta/sbin/vyatta-link-detect $VAR(../../@).$VAR(../@) on +delete:/opt/vyatta/sbin/vyatta-link-detect $VAR(../../@).$VAR(../@) off diff --git a/templates/interfaces/ethernet/node.tag/vif/node.tag/disable/node.def b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable/node.def new file mode 100644 index 00000000..78b24870 --- /dev/null +++ b/templates/interfaces/ethernet/node.tag/vif/node.tag/disable/node.def @@ -0,0 +1,11 @@ +help: Set interface disabled +update: /etc/netplug/linkdown.d/dhclient $VAR(../../@).$VAR(../@) + if ! sudo ip link set $VAR(../../@).$VAR(../@) down 2>/dev/null; then + echo "Error disabling dev $VAR(../../@).$VAR(../@)" + /etc/netplug/linkup.d/dhclient $VAR(../../@).$VAR(../@) + exit 1 + fi +delete: if ! sudo ip link set $VAR(../../@).$VAR(../@) up; then + echo "Error enabling dev $VAR(../../@).$VAR(../@)" + exit 1 + fi |