vyatta-cfg-system (0.19.116) unstable; urgency=low * Fix ipv6 tunnel template error -- Stephen Hemminger Wed, 24 Aug 2011 10:17:49 -0700 vyatta-cfg-system (0.19.115) unstable; urgency=low [ Stephen Hemminger ] * Cleanup vyatta-config-reboot-params * Fix deprecated use of chown [ John Southworth ] * Bugfix 7461: Fix syntax problem when setting a mac address -- John Southworth Tue, 23 Aug 2011 16:01:32 -0500 vyatta-cfg-system (0.19.114) unstable; urgency=low * Migration for bug 6900 -- John Southworth Mon, 15 Aug 2011 13:30:23 -0500 vyatta-cfg-system (0.19.113) unstable; urgency=low * Don't bring ethernet device up if it is disabled -- Stephen Hemminger Thu, 11 Aug 2011 15:00:44 -0700 vyatta-cfg-system (0.19.112) unstable; urgency=low * Add encapsulation to IPv6 parameters deletion so that ipip6 tunnels will work properly after a deletion. -- John Southworth Thu, 11 Aug 2011 16:34:41 -0500 vyatta-cfg-system (0.19.111) unstable; urgency=low [ John Southworth ] * Fix permission problems on /config during initial install [ Jon Andersson ] * Initial checkin of ipv6 tunnel support [ John Southworth ] -- John Southworth Thu, 11 Aug 2011 12:51:51 -0500 vyatta-cfg-system (0.19.110) unstable; urgency=low * bridge: allow setting mac address -- Stephen Hemminger Mon, 08 Aug 2011 16:43:34 -0700 vyatta-cfg-system (0.19.109) unstable; urgency=low * 0.19.108 * fix missing command in debian/control -- Stephen Hemminger Sun, 07 Aug 2011 20:46:26 -0700 vyatta-cfg-system (0.19.108) unstable; urgency=low * Force dependency on later vyatta-cfg package -- Stephen Hemminger Sun, 07 Aug 2011 20:45:23 -0700 vyatta-cfg-system (0.19.107) unstable; urgency=low * ethernet: avoid needlessly setting mac address -- Stephen Hemminger Fri, 05 Aug 2011 20:55:41 -0700 vyatta-cfg-system (0.19.106) unstable; urgency=low * Added to make "force" op-mode command accessible to user type -- Deepti Kulkarni Wed, 27 Jul 2011 08:00:09 -0700 vyatta-cfg-system (0.19.105) unstable; urgency=low * Bugfix 7350: Allow default config.boot to be selected as config file. -- Bob Gilligan Wed, 17 Aug 2011 15:08:32 -0700 vyatta-cfg-system (0.19.104) unstable; urgency=low * Fix permission problems on /config during initial install -- John Southworth Fri, 15 Jul 2011 20:49:15 -0700 vyatta-cfg-system (0.19.103) unstable; urgency=low * Bugfix 7070: Need to provide full path for irq-affinity.pl in system() -- Bob Gilligan Sun, 14 Aug 2011 16:37:47 -0700 vyatta-cfg-system (0.19.102) unstable; urgency=low * Add hook to call a config migration script when upgrading from VSE Demo. -- Bob Gilligan Fri, 12 Aug 2011 17:30:00 -0700 vyatta-cfg-system (0.19.101) unstable; urgency=low [ Stephen Hemminger ] * Fix duplicate detection of hypervisor [ John Southworth ] * Bugfix 7326: add /config/support directory by default -- John Southworth Wed, 13 Jul 2011 15:56:08 -0500 vyatta-cfg-system (0.19.100) unstable; urgency=low * new branch -- Deepti Kulkarni Thu, 07 Jul 2011 20:55:59 -0700 vyatta-cfg-system (0.19.99) unstable; urgency=low * Add more hypervisor detection logic -- Stephen Hemminger Wed, 06 Jul 2011 10:20:24 -0700 vyatta-cfg-system (0.19.98) unstable; urgency=low * Move the is_uniq_address function to Interface.pm -- John Southworth Tue, 05 Jul 2011 16:21:46 -0500 vyatta-cfg-system (0.19.97) unstable; urgency=low * bugfix 6801: check to see if the same address is configured on another interface in the working config before allowing an address to be set on an interface, allows for swapping addresses in the same commit -- John Southworth Fri, 01 Jul 2011 17:32:25 -0700 vyatta-cfg-system (0.19.96) unstable; urgency=low * Make add system image use the new config directory for copying files -- John Southworth Fri, 24 Jun 2011 17:56:26 -0500 vyatta-cfg-system (0.19.95) unstable; urgency=low * Add better hypervisor detect logic -- Stephen Hemminger Thu, 23 Jun 2011 16:26:27 -0700 vyatta-cfg-system (0.19.94) unstable; urgency=low * Revert "bonding: remove requirement of slaves existing before vif" * Ignore new hypervisor_vendor binary -- Stephen Hemminger Thu, 16 Jun 2011 18:28:11 -0400 vyatta-cfg-system (0.19.93) unstable; urgency=low * bonding: remove requirement of slaves existing before vif * Add utility to find hypervisor vendor -- Stephen Hemminger Thu, 16 Jun 2011 17:53:43 -0400 vyatta-cfg-system (0.19.92) unstable; urgency=low * Bugfix 5856: Add username and password options. -- Bob Gilligan Thu, 14 Jul 2011 09:51:17 -0700 vyatta-cfg-system (0.19.91) unstable; urgency=low * Move the mtu settings out of the main inteface priority subtree as a failure boundry -- John Southworth Wed, 08 Jun 2011 17:26:52 -0500 vyatta-cfg-system (0.19.90) unstable; urgency=low * Always log authorization messages -- Stephen Hemminger Wed, 01 Jun 2011 13:46:49 +0900 vyatta-cfg-system (0.19.89) unstable; urgency=low * alternative fix for bug 6958 -- An-Cheng Huang Wed, 25 May 2011 13:44:44 -0700 vyatta-cfg-system (0.19.88) unstable; urgency=low * don't assume hw-id exists since it can be deleted -- An-Cheng Huang Mon, 23 May 2011 08:41:52 -0700 vyatta-cfg-system (0.19.87) unstable; urgency=low * irq-affinity: more fixup -- Stephen Hemminger Fri, 20 May 2011 11:14:21 -0700 vyatta-cfg-system (0.19.86) unstable; urgency=low * irq-affinity: use sysfs to read cpu topology -- Stephen Hemminger Fri, 20 May 2011 08:40:33 -0700 vyatta-cfg-system (0.19.85) unstable; urgency=low [ Stephen Hemminger ] * 0.19.82 [ Stig Thormodsrud ] * Partial fix for 6393: keepalived shutdown too late - can cause lost traffic * 0.19.83 [ Stephen Hemminger ] * Use syslog perror for debug option * irq-affinity: fix handling of UP system [ Stig Thormodsrud ] * 0.19.84 [ Stephen Hemminger ] * irq-affinity: initialize sockets to 1 -- Stephen Hemminger Fri, 20 May 2011 07:30:32 -0700 vyatta-cfg-system (0.19.84) unstable; urgency=low * Partial fix for 6393: keepalived shutdown too late - can cause lost traffic * 0.19.83 -- Stig Thormodsrud Thu, 19 May 2011 17:16:01 -0700 vyatta-cfg-system (0.19.83) unstable; urgency=low * Partial fix for 6393: keepalived shutdown too late - can cause lost traffic -- Stig Thormodsrud Mon, 16 May 2011 23:52:05 -0700 vyatta-cfg-system (0.19.82) unstable; urgency=low * Use syslog perror for debug option * irq-affinity: fix handling of UP system -- Stephen Hemminger Thu, 19 May 2011 08:10:13 -0700 vyatta-cfg-system (0.19.81) unstable; urgency=low * Fix calculation of number of cores on systems with more than one socket. * Bugfix: 6773 (again). Fix handling of single-queue NICs on MPs. -- Bob Gilligan Tue, 17 May 2011 12:10:55 -0700 vyatta-cfg-system (0.19.80) unstable; urgency=low * Support more than 10 CPUs. -- Bob Gilligan Tue, 17 May 2011 08:46:37 -0700 vyatta-cfg-system (0.19.79) unstable; urgency=low * Fix 5912: "show vrrp" doesn't list sync-group -- Stig Thormodsrud Wed, 18 May 2011 12:25:33 -0700 vyatta-cfg-system (0.19.78) unstable; urgency=low * irq-affinity: add workaround to avoid some cpu's -- Stephen Hemminger Tue, 17 May 2011 16:16:57 -0700 vyatta-cfg-system (0.19.77) unstable; urgency=low * Fix grub syntax error -- Stephen Hemminger Tue, 17 May 2011 08:51:43 -0700 vyatta-cfg-system (0.19.76) unstable; urgency=low * eliminate hard-coded commit hook directory -- An-Cheng Huang Mon, 16 May 2011 20:11:38 -0700 vyatta-cfg-system (0.19.75) unstable; urgency=low * smp-affinity: fix typo for assign_multiqueue -- Stephen Hemminger Mon, 16 May 2011 16:24:57 -0700 vyatta-cfg-system (0.19.74) unstable; urgency=low [ Stephen Hemminger ] * Remove unused parts of rl-system.init [ John Southworth ] * Bugfix 7076: make add system image copy to /config instead of /opt/vyatta/etc/config -- John Southworth Fri, 13 May 2011 11:55:40 -0500 vyatta-cfg-system (0.19.73) unstable; urgency=low * Fix Bug 7012 make /config available with init-floppy -- Mohit Mehta Wed, 11 May 2011 11:33:15 -0700 vyatta-cfg-system (0.19.72) unstable; urgency=low * support interactive mode for rest api for install image op mode commands. -- Michael Larson Tue, 10 May 2011 14:22:05 -0700 vyatta-cfg-system (0.19.71) unstable; urgency=low * changes for new commit * more changes for new commit -- An-Cheng Huang Tue, 10 May 2011 09:33:55 +0800 vyatta-cfg-system (0.19.70) unstable; urgency=low * Support netxen NIC irq naming convention * Convert mac octets from hex -- Stephen Hemminger Mon, 09 May 2011 09:40:24 -0700 vyatta-cfg-system (0.19.69) unstable; urgency=low * Update help for console speed -- Stephen Hemminger Fri, 06 May 2011 12:10:08 -0700 vyatta-cfg-system (0.19.68) unstable; urgency=low * Update grub config to new syntax * Make ext4 the default file system type * Using ext4 for filesystem depends on newer version of grub -- Stephen Hemminger Thu, 05 May 2011 08:26:20 -0700 vyatta-cfg-system (0.19.67) unstable; urgency=low * Align install-image partition correctly -- Stephen Hemminger Wed, 04 May 2011 17:26:37 -0700 vyatta-cfg-system (0.19.66) unstable; urgency=low * Adjust root partition offset based on disk size -- Stephen Hemminger Tue, 03 May 2011 19:54:12 -0700 vyatta-cfg-system (0.19.65) unstable; urgency=low * Make irq affinity handle any irq naming convention -- Stephen Hemminger Tue, 03 May 2011 16:38:40 -0700 vyatta-cfg-system (0.19.64) unstable; urgency=low * Fix irq-affinity mapping for multiqueue NIC's -- Stephen Hemminger Mon, 02 May 2011 16:45:04 -0700 vyatta-cfg-system (0.19.63) unstable; urgency=low * Yet another better alignment start -- Stephen Hemminger Sat, 30 Apr 2011 10:32:50 -0700 vyatta-cfg-system (0.19.62) unstable; urgency=low * Fix alignment of root partition -- Stephen Hemminger Sat, 30 Apr 2011 09:49:31 -0700 vyatta-cfg-system (0.19.61) unstable; urgency=low * Tell parted to align disk partition -- Stephen Hemminger Thu, 28 Apr 2011 17:00:08 -0700 vyatta-cfg-system (0.19.60) unstable; urgency=low * Remove unsuccessful attempt to blacklist PC speaker -- Stephen Hemminger Wed, 27 Apr 2011 14:37:10 -0700 vyatta-cfg-system (0.19.59) unstable; urgency=low * Fix Bug 6811 ENH: add a proper post-configuration boot script -- Mohit Mehta Wed, 20 Apr 2011 14:25:26 -0700 vyatta-cfg-system (0.19.58) unstable; urgency=low * * run start-up script vyatta-config-reboot-params very early in boot process -- Mohit Mehta Mon, 18 Apr 2011 18:14:09 -0700 vyatta-cfg-system (0.19.57) unstable; urgency=low * * Add help and checks for VRRP transition-script nodes -- Mohit Mehta Wed, 13 Apr 2011 18:02:09 -0700 vyatta-cfg-system (0.19.56) unstable; urgency=low * fix typo in irq-affinity -- Stephen Hemminger Wed, 13 Apr 2011 11:41:52 -0700 vyatta-cfg-system (0.19.55) unstable; urgency=low * Bonding script typo * Fix irq naming convention mapping code -- Stephen Hemminger Wed, 13 Apr 2011 09:09:46 -0700 vyatta-cfg-system (0.19.54) unstable; urgency=low * Fix wrong name in get_irq_affinity -- Stephen Hemminger Tue, 12 Apr 2011 09:30:15 -0700 vyatta-cfg-system (0.19.53) unstable; urgency=low * Reset irq affinity when adding interface to bond group -- Stephen Hemminger Wed, 30 Mar 2011 15:08:39 -0700 vyatta-cfg-system (0.19.52) unstable; urgency=low * Remove these priorities as they are not needed. They are from an earlier community submitted patch see bug 5491 * Bugfix 6958: only call cleanup script for tunnel modules on the last sibling deletion -- John Southworth Mon, 28 Mar 2011 18:19:32 -0500 vyatta-cfg-system (0.19.51) unstable; urgency=low * Update copybreak module param list * Fix use of uninitialized ospeed -- Stephen Hemminger Fri, 25 Mar 2011 15:40:06 -0700 vyatta-cfg-system (0.19.50) unstable; urgency=low [ Stephen Hemminger ] * Remove rsyslog logrotate file [ Robert Bays ] * fix for bug 6919: Console settings don't support hvc0 for xen * updated fix for bug 6919: Console settings don't support hvc0 for xen * match console type only once. [ Stephen Hemminger ] * Handle irq assignment on multiqueue NIC -- Stephen Hemminger Wed, 16 Mar 2011 12:22:23 -0700 vyatta-cfg-system (0.19.49) unstable; urgency=low * Don't set speed duplex twice * Remove flag file at end of transaction * Speed/duplex setup improvements -- Stephen Hemminger Fri, 11 Mar 2011 14:56:40 -0800 vyatta-cfg-system (0.19.48) unstable; urgency=low [ Stephen Hemminger ] * Fix typo in domain name regex [ Michael Larson ] * fix for bug 6081. Warning, but allow commit to proceed if duplicate address is found. -- Michael Larson Thu, 10 Mar 2011 10:53:58 -0800 vyatta-cfg-system (0.19.47) unstable; urgency=low * Test for ipv6 blacklist when configuring SNMP -- Stephen Hemminger Tue, 08 Mar 2011 09:49:14 -0800 vyatta-cfg-system (0.19.46) unstable; urgency=low * Fix SNMP ifAlias for more than 10 devices -- Stephen Hemminger Mon, 07 Mar 2011 16:13:26 -0800 vyatta-cfg-system (0.19.45) unstable; urgency=low * Fix network name scan for wireless -- Stephen Hemminger Thu, 03 Mar 2011 15:33:17 -0800 vyatta-cfg-system (0.19.44) unstable; urgency=low [ Stephen Hemminger ] * Fix script to handle more than 10 interfaces [ John Southworth ] * Bugfix 5491: Allow tunnel parameters to be changed on a preconfigured tunnel -- John Southworth Thu, 03 Mar 2011 11:38:19 -0600 vyatta-cfg-system (0.19.43) unstable; urgency=low * Warn if attempting to force mask on multiqueue NIC -- Stephen Hemminger Tue, 01 Mar 2011 11:25:55 -0800 vyatta-cfg-system (0.19.42) unstable; urgency=low * Workaround Xen NIC address -- Stephen Hemminger Fri, 25 Feb 2011 11:23:30 -0800 vyatta-cfg-system (0.19.41) unstable; urgency=low * Increase upper limit of IPV6 route table * Handle Vmware mulitqueue naming convention * Don't set irq affinity if device is disabled * Validate domain and host name * Change where ipv6 route table size is increased -- Stephen Hemminger Fri, 25 Feb 2011 10:38:17 -0800 vyatta-cfg-system (0.19.40) unstable; urgency=low * Use standard mechanism to start/stop snmp * Handle case of device with no active IRQ -- Stephen Hemminger Tue, 22 Feb 2011 10:07:39 -0800 vyatta-cfg-system (0.19.39) unstable; urgency=low * Fix syslog not reloading properly after changing the log level -- John Southworth Mon, 07 Feb 2011 14:24:31 -0600 vyatta-cfg-system (0.19.38) unstable; urgency=low * Bugfix 6773: Spread load of single-queue NICs across all CPUs. -- Bob Gilligan Thu, 03 Feb 2011 00:30:03 -0800 vyatta-cfg-system (0.19.37) unstable; urgency=low [ Mohit Mehta ] * Fix Bug 6696 Internal error for release/renew dhcp interface under op mode [ Robert Bays ] * Fix grammar error in help string. [ Bob Gilligan ] * Bugfix 6156: Allow time for renaming to complete before running biosdevname -- Bob Gilligan Tue, 01 Feb 2011 10:52:49 -0800 vyatta-cfg-system (0.19.36) unstable; urgency=low [ Robert Bays ] * Fix grammar error in help string. [ Mohit Mehta ] * use val_help to present valid info for node -- Mohit Mehta Mon, 31 Jan 2011 12:56:34 -0800 vyatta-cfg-system (0.19.35) unstable; urgency=low * Fix Bug 6696 Internal error for release/renew dhcp interface under op mode -- Mohit Mehta Thu, 27 Jan 2011 13:54:04 -0800 vyatta-cfg-system (0.19.34) unstable; urgency=low [ Stephen Hemminger ] * Pass interface name correctly when deleting dhcpv6 [ Stig Thormodsrud ] * Fix 6501: "clear vrrp master interface group " doesnt work with sync groups. [ Stephen Hemminger ] * Rearrange priority for pseudo-ethernet * Rearrange priority for pseudo-ethernet [ Stig Thormodsrud ] * Fix vrrp duplicate generation of last sync-group entry. -- Stig Thormodsrud Wed, 26 Jan 2011 15:43:08 -0800 vyatta-cfg-system (0.19.33) unstable; urgency=low [ Stephen Hemminger ] * Revert "Add debug logging." * Add logging to coldplug * Add more debug output * Don't fail if config.boot does not exist * Pass interface name correctly when deleting dhcpv6 [ Stig Thormodsrud ] * Fix 6501: "clear vrrp master interface group " doesnt work with sync groups. -- Stig Thormodsrud Tue, 25 Jan 2011 11:14:33 -0800 vyatta-cfg-system (0.19.32) unstable; urgency=low [ Stephen Hemminger ] * Change for rsyslog reload [ Bob Gilligan ] * Add debug logging. -- Bob Gilligan Thu, 20 Jan 2011 22:25:40 -0800 vyatta-cfg-system (0.19.31) unstable; urgency=low * Remove call to tshark during vrrp state transition. -- Stig Thormodsrud Thu, 20 Jan 2011 18:18:26 -0800 vyatta-cfg-system (0.19.30) unstable; urgency=low [ Bob Gilligan ] * Bugfix 6684: Don't delete wanpipe config files. * Bugfix 6156: Policy must be given on command line. * Bugfix 6668: Check to see if log files need rotation hourly. * Bugfix 6687: Need to explicitly specify the RAID metadata version number. * Bugfix 6684: Don't delete wanpipe config files. [ Stephen Hemminger ] * Cleanup old net-rules on upgrade [ Bob Gilligan ] -- Bob Gilligan Wed, 19 Jan 2011 20:10:16 -0800 vyatta-cfg-system (0.19.29) unstable; urgency=low * Bugfix 6687: Need to explicitly specify the RAID metadata version number. -- Bob Gilligan Mon, 17 Jan 2011 23:05:43 -0800 vyatta-cfg-system (0.19.28) unstable; urgency=low * Bugfix 6668: Check to see if log files need rotation hourly. -- Bob Gilligan Mon, 17 Jan 2011 19:47:35 -0800 vyatta-cfg-system (0.19.27) unstable; urgency=low [ Stephen Hemminger ] * Change priority of bonding device address [ Bob Gilligan ] * Bugfix 6156: Policy must be given on command line. -- Bob Gilligan Sun, 16 Jan 2011 23:06:37 -0800 vyatta-cfg-system (0.19.26) unstable; urgency=low [ Stephen Hemminger ] * Fix check for broadcast address [ Mohit Mehta ] * Fix Bug 6599 ha_logd starting up by default * skip 'new branch' commit from mendocino when using merge-branch -- Mohit Mehta Tue, 04 Jan 2011 17:50:17 -0800 vyatta-cfg-system (0.19.25) unstable; urgency=low * new branch -- An-Cheng Huang Tue, 28 Dec 2010 13:47:51 -0800 vyatta-cfg-system (0.19.24) unstable; urgency=low * Add more error recovery and disk space checking. -- Bob Gilligan Wed, 22 Dec 2010 02:34:19 -0800 vyatta-cfg-system (0.19.23) unstable; urgency=low * Affinity script was failing to configure some queues of multi-queue NICs. -- Bob Gilligan Wed, 22 Dec 2010 01:23:08 -0800 vyatta-cfg-system (0.19.22) unstable; urgency=low * Add path to SSH V1 host key to config -- Stephen Hemminger Fri, 17 Dec 2010 11:23:31 -0800 vyatta-cfg-system (0.19.21) unstable; urgency=low * Don't regenerate ssh v1 key * Add checking of protocol-version value * Fix help for name-server -- Stephen Hemminger Thu, 16 Dec 2010 13:20:55 -0800 vyatta-cfg-system (0.19.20) unstable; urgency=low * Fix 6554: clear vrrp master tab completion results in cli api error -- Stig Thormodsrud Fri, 10 Dec 2010 18:51:36 -0800 vyatta-cfg-system (0.19.19) unstable; urgency=low * Fix 6453: After configuring VRRP on interface, VRRP is not active until VRRP is manually restared with "restart vrrp" command. -- Stig Thormodsrud Fri, 10 Dec 2010 17:27:03 -0800 vyatta-cfg-system (0.19.18) unstable; urgency=low * Fix update of serial speed on all grub lines -- Stephen Hemminger Fri, 10 Dec 2010 14:54:00 -0800 vyatta-cfg-system (0.19.17) unstable; urgency=low * Allow telnet and ssh to start before routing protocols -- Stephen Hemminger Mon, 06 Dec 2010 17:13:11 -0800 vyatta-cfg-system (0.19.16) unstable; urgency=low * Fix check for unspecified IPv6 address * Move is_local_address to common code * Allow Ipv6 addresses in resolv.conf * Move touch() perl to Vyatta::File -- Stephen Hemminger Mon, 06 Dec 2010 16:39:57 -0800 vyatta-cfg-system (0.19.15) unstable; urgency=low * Set up commit-revisions if configured after init-floppy. -- Stig Thormodsrud Sat, 04 Dec 2010 13:39:09 -0800 vyatta-cfg-system (0.19.14) unstable; urgency=low * Allow configuring console speed etc * Allow more serial console lines * Block accidental use of virtual consoles * Mark the Vyatta specific section of inittab -- Stephen Hemminger Thu, 02 Dec 2010 17:17:26 -0800 vyatta-cfg-system (0.19.13) unstable; urgency=low * Cleanup leftover ipv6_no_fwd files * Set group ownership and permissions on /var/run/vyatta * Fix delete of mac address on bonding interface -- Stephen Hemminger Thu, 02 Dec 2010 13:30:48 -0800 vyatta-cfg-system (0.19.12) unstable; urgency=low * Speed up install-system progress bar -- Stephen Hemminger Wed, 01 Dec 2010 15:26:53 -0800 vyatta-cfg-system (0.19.11) unstable; urgency=low * Fix dhcpv6 client script -- Stephen Hemminger Tue, 30 Nov 2010 14:21:39 -0800 vyatta-cfg-system (0.19.10) unstable; urgency=low * Add dhcpv6 options for all interfaces that support DHCP * Add duplicate address check on commit * Remove old code for address insertion/deletion/validation -- Stephen Hemminger Tue, 30 Nov 2010 14:09:42 -0800 vyatta-cfg-system (0.19.9) unstable; urgency=low * Fix interface scanning on boot - allow more mac addresses * Automatically configure physical device for wireless interfaces -- Stephen Hemminger Mon, 29 Nov 2010 17:16:45 -0800 vyatta-cfg-system (0.19.8) unstable; urgency=low * Fix use of undefined in comparison -- Stephen Hemminger Mon, 29 Nov 2010 16:06:03 -0800 vyatta-cfg-system (0.19.7) unstable; urgency=low * Remove module rather than deleting link device -- Stephen Hemminger Mon, 29 Nov 2010 12:23:53 -0800 vyatta-cfg-system (0.19.6) unstable; urgency=low * Don't let biosdevname look at wireless devices -- Stephen Hemminger Wed, 24 Nov 2010 16:50:26 -0800 vyatta-cfg-system (0.19.5) unstable; urgency=low * Fix tunnel cleanup script -- Stephen Hemminger Wed, 24 Nov 2010 12:24:52 -0800 vyatta-cfg-system (0.19.4) unstable; urgency=low * Add cpufrequtils default config file * Fix range checking on bridge port priority is limited to 0-63 * Revert "Don't need to rename vlan devices" -- Stephen Hemminger Wed, 24 Nov 2010 09:38:45 -0800 vyatta-cfg-system (0.19.3) unstable; urgency=low [ Bob Gilligan ] * Bugfix 6457: Don't ask the question if you're not going to like the answer. * 0.19.2 [ Stephen Hemminger ] * Don't allow zero for VRRP priority or VRID * Bonding should have same VRRP rules as Ethernet * typo in tunnel cleanup * Don't need to rename vlan devices * Make scripts executable * Improve performance of syntax checks for vrrp address * Use sockets to check if IP address is local * Use unlink rather than system() to remove files in keepalive script * Remove check function from keepalived perl script -- Stephen Hemminger Tue, 23 Nov 2010 19:03:23 -0800 vyatta-cfg-system (0.19.2) unstable; urgency=low [ Bob Gilligan ] * Bugfix 6457: Don't ask the question if you're not going to like the answer. [ Stephen Hemminger ] * Don't allow zero for VRRP priority or VRID * Bonding should have same VRRP rules as Ethernet * typo in tunnel cleanup [ Bob Gilligan ] -- Bob Gilligan Sun, 21 Nov 2010 08:00:56 -0800 vyatta-cfg-system (0.19.1) unstable; urgency=low * Cleanup tunnel slave device on last delete * Add utilities checking addresses * Replace perl address validation with utility * Use script vyatta-address to set interface * Optimize lookup of local ip on tunnels -- Stephen Hemminger Mon, 22 Nov 2010 12:57:15 -0800 vyatta-cfg-system (0.18.21) unstable; urgency=low * Bugfix 6101: Make a syslog record when a new image is added. -- Bob Gilligan Sun, 21 Nov 2010 03:08:06 -0800 vyatta-cfg-system (0.18.20) unstable; urgency=low * Bring tunnel down before deleting * When removing tunnel, remove encapsulation device -- Stephen Hemminger Thu, 18 Nov 2010 16:45:22 -0800 vyatta-cfg-system (0.18.19) unstable; urgency=low * Add more checks for bridge/bond conflicts * Add syntax check for bridge interface name * Fix help for syslog -- Stephen Hemminger Thu, 18 Nov 2010 13:14:48 -0800 vyatta-cfg-system (0.18.18) unstable; urgency=low * Add check for adding bridge-group and bond-group when setting address * Add check for interface address before putting it in bonded device * Cleanup bridge port management * Cleanup bond-group syntax and commit checks -- Stephen Hemminger Wed, 17 Nov 2010 20:46:53 -0800 vyatta-cfg-system (0.18.17) unstable; urgency=low * Allow longer domain-name values * Remove useless comment * Add address checks to bonding -- Stephen Hemminger Wed, 17 Nov 2010 15:58:01 -0800 vyatta-cfg-system (0.18.16) unstable; urgency=low * Add option to disable host validation (DNS) for SSH * Add ability to configure SSH listen address * Add ability to configure telnet listen-addres * Need to restart telnet if port or listen-address changes -- Stephen Hemminger Tue, 16 Nov 2010 16:25:44 -0800 vyatta-cfg-system (0.18.15) unstable; urgency=low * update call to error location api. -- Michael Larson Tue, 16 Nov 2010 09:34:32 -0800 vyatta-cfg-system (0.18.14) unstable; urgency=low * Restore IRQ affinity when device is renabled -- Stephen Hemminger Mon, 15 Nov 2010 13:56:33 -0800 vyatta-cfg-system (0.18.13) unstable; urgency=low * Add hw-id for existing interfaces to config -- Stephen Hemminger Mon, 15 Nov 2010 13:14:04 -0800 vyatta-cfg-system (0.18.12) unstable; urgency=low * Move cleanup of serial interface into rl-system.init -- Stephen Hemminger Mon, 15 Nov 2010 10:43:27 -0800 vyatta-cfg-system (0.18.11) unstable; urgency=low * Add more checks on VLAN * Change mode on all executable scripts * remove deprecated linda override * New IRQ affinity script and RPS support * Fix irq-affinity for special cases * Fix is_supported_speed matching -- Stephen Hemminger Fri, 12 Nov 2010 14:51:08 -0800 vyatta-cfg-system (0.18.10) unstable; urgency=low * Fix path to ethtool * Check speed and duplex settings on Ethernet interfaces * Don't produce warnings for drivers that don't support ethtool -- Stephen Hemminger Mon, 08 Nov 2010 15:13:17 -0800 vyatta-cfg-system (0.18.9) unstable; urgency=low * Add special case for single-queue NICs using multi-queue naming format. -- Bob Gilligan Thu, 04 Nov 2010 12:26:39 -0700 vyatta-cfg-system (0.18.8) unstable; urgency=low * Fix to show ifAlias of loopback -- Stephen Hemminger Wed, 03 Nov 2010 13:39:06 -0700 vyatta-cfg-system (0.18.7) unstable; urgency=low * Remove non-functional commit test on mtu of vif -- Stephen Hemminger Tue, 02 Nov 2010 13:06:34 -0700 vyatta-cfg-system (0.18.6) unstable; urgency=low * Allow setting MTU of VIF * Priority change for bridging a bonded vif * Priority change for bridging a bonded vif -- Stephen Hemminger Tue, 02 Nov 2010 08:41:59 -0700 vyatta-cfg-system (0.18.5) unstable; urgency=low * Fix goto in vyatta-net.rules * Add net-snmp ifAlias hook -- Stephen Hemminger Fri, 29 Oct 2010 11:33:08 -0700 vyatta-cfg-system (0.18.4) unstable; urgency=low * fix for bug 6388 -- An-Cheng Huang Thu, 28 Oct 2010 18:14:26 -0700 vyatta-cfg-system (0.18.3) unstable; urgency=low * Don't rename vif and other non-driver interfaces -- Stephen Hemminger Wed, 27 Oct 2010 11:08:12 -0700 vyatta-cfg-system (0.18.2) unstable; urgency=low * Fix set on uniproc machine -- Stephen Hemminger Wed, 27 Oct 2010 10:53:42 -0700 vyatta-cfg-system (0.18.1) unstable; urgency=low * IRQ affinity update * Update dependency on vyatta-cfg * Add irqaffin to Makefile * Fix overwrite of irq commands -- Stephen Hemminger Wed, 27 Oct 2010 10:47:46 -0700 vyatta-cfg-system (0.17.128) unstable; urgency=low * Use pgrep to check if ntp running -- Stephen Hemminger Tue, 26 Oct 2010 20:37:46 -0700 vyatta-cfg-system (0.17.127) unstable; urgency=low * Move config-mgmt to it's own package. -- Stig Thormodsrud Tue, 26 Oct 2010 14:48:23 -0700 vyatta-cfg-system (0.17.126) unstable; urgency=low * Change vyatta_net_name into a perl script * Sort the interface names when adding -- Stephen Hemminger Tue, 26 Oct 2010 14:35:45 -0700 vyatta-cfg-system (0.17.125) unstable; urgency=low * Fix bond hash policy * Fix typo in hash_policy * Wait to bring up bond interface until end * Add bonding ARP monitor parmeters -- Stephen Hemminger Mon, 25 Oct 2010 10:20:08 -0700 vyatta-cfg-system (0.17.124) unstable; urgency=low * Fix commit-uri bug. -- Stig Thormodsrud Sat, 23 Oct 2010 12:14:47 -0700 vyatta-cfg-system (0.17.123) unstable; urgency=low * Fist pass at adding archive to uri on commit. -- Stig Thormodsrud Fri, 22 Oct 2010 17:38:43 -0700 vyatta-cfg-system (0.17.122) unstable; urgency=low * Make empty config files readable -- Stephen Hemminger Wed, 20 Oct 2010 17:34:06 -0700 vyatta-cfg-system (0.17.121) unstable; urgency=low [ Stephen Hemminger ] * keep serial console until configuration is working [ An-Cheng Huang ] -- An-Cheng Huang Tue, 19 Oct 2010 18:24:47 -0700 vyatta-cfg-system (0.17.120) unstable; urgency=low * Neuter the serial console config until it works -- Stephen Hemminger Mon, 18 Oct 2010 12:00:29 -0700 vyatta-cfg-system (0.17.119) unstable; urgency=low * Fix syntax error in vyatta_update_console.pl. -- Stig Thormodsrud Sat, 16 Oct 2010 10:04:44 -0700 vyatta-cfg-system (0.17.118) unstable; urgency=low * Add ability to set transmit hash policy * Handle error cases on console update * 0.17.117 -- Stephen Hemminger Fri, 15 Oct 2010 15:56:56 -0700 vyatta-cfg-system (0.17.117) unstable; urgency=low [ root ] * change to accessor for outputerror [ Stephen Hemminger ] -- Stephen Hemminger Fri, 15 Oct 2010 15:55:50 -0700 vyatta-cfg-system (0.17.116) unstable; urgency=low * Add ability to run modem getty -- Stephen Hemminger Fri, 15 Oct 2010 10:35:46 -0700 vyatta-cfg-system (0.17.115) unstable; urgency=low * Change speed in grub config as well -- Stephen Hemminger Thu, 14 Oct 2010 17:23:31 -0700 vyatta-cfg-system (0.17.114) unstable; urgency=low * Add better control over console screen blanker * Need sudo to change console settings -- Stephen Hemminger Thu, 14 Oct 2010 16:58:42 -0700 vyatta-cfg-system (0.17.113) unstable; urgency=low * Turn off screen blanking on console * Need to be root to write /etc/inittab * Restore old motd and login banner * Remove serial console before config -- Stephen Hemminger Thu, 14 Oct 2010 16:18:35 -0700 vyatta-cfg-system (0.17.112) unstable; urgency=low * Add support for setting up serial console ports * Fix email address in changelog * Fix regexp used for disabling up serial with Xen * Fix serial console setup functions * Change syntax for console config -- Stephen Hemminger Thu, 14 Oct 2010 15:08:42 -0700 vyatta-cfg-system (0.17.111) unstable; urgency=low * Revise new ntp server config -- Stephen Hemminger Wed, 13 Oct 2010 18:12:44 -0700 vyatta-cfg-system (0.17.110) unstable; urgency=low * Migrate NTP server to services ntp -- Stephen Hemminger Wed, 13 Oct 2010 18:04:09 -0700 vyatta-cfg-system (0.17.109) unstable; urgency=low * Add default vyatta rsyslog config rules -- Stephen Hemminger Mon, 11 Oct 2010 12:22:30 -0700 vyatta-cfg-system (0.17.108) unstable; urgency=low * Add LSB support information to telnetd.init * Add ubuntu changes to rsyslog -- Stephen Hemminger Sun, 10 Oct 2010 11:42:35 -0700 vyatta-cfg-system (0.17.107) unstable; urgency=low [ root ] * modified reference error location. [ Stephen Hemminger ] * Check if SNMP is running before starting -- Stephen Hemminger Sat, 09 Oct 2010 15:51:50 -0700 vyatta-cfg-system (0.17.106) unstable; urgency=low * use new error reference location method -- root Fri, 08 Oct 2010 12:13:11 -0700 vyatta-cfg-system (0.17.105) unstable; urgency=low * Convert from syslog to rsyslog -- Stephen Hemminger Fri, 08 Oct 2010 17:12:41 -0700 vyatta-cfg-system (0.17.104) unstable; urgency=low [ Stephen Hemminger ] * Add dependency on Squeeze version of udev * Change udev network naming to be more cooperative * Put udev rules in /lib/udev [ Mohit Mehta ] * moved code for zones to vyatta-zone package -- Mohit Mehta Thu, 07 Oct 2010 19:16:02 -0700 vyatta-cfg-system (0.17.103) unstable; urgency=low * Update hwclockfirst fixup for Squeeze * Fix sysklog dependency * List rsyslog package dependency -- Stephen Hemminger Thu, 07 Oct 2010 11:40:06 -0700 vyatta-cfg-system (0.17.102) unstable; urgency=low * * update count_iptables module usage -- Mohit Mehta Tue, 21 Sep 2010 21:15:28 -0700 vyatta-cfg-system (0.17.101) unstable; urgency=low * * use count_iptables_rule from MISC module -- Mohit Mehta Tue, 21 Sep 2010 17:37:14 -0700 vyatta-cfg-system (0.17.100) unstable; urgency=low * Bugfix 6210: Fix up case where login section is missing from config file. -- Bob Gilligan Sat, 18 Sep 2010 01:56:15 -0700 vyatta-cfg-system (0.17.99) unstable; urgency=low * fix init-floppy for squeeze -- An-Cheng Huang Mon, 20 Sep 2010 15:23:36 -0700 vyatta-cfg-system (0.17.98) unstable; urgency=low * Bugfix 6210: Fix parsing of config file -- Bob Gilligan Fri, 17 Sep 2010 22:38:07 -0700 vyatta-cfg-system (0.17.97) unstable; urgency=low * partial fix for bug 6152 * more fixes for bug 6152 -- An-Cheng Huang Mon, 13 Sep 2010 18:53:48 -0700 vyatta-cfg-system (0.17.96) unstable; urgency=low * rename pre-mendocino ipv6 modprobe files to add .conf suffix -- Mohit Mehta Mon, 13 Sep 2010 15:49:40 -0700 vyatta-cfg-system (0.17.95) unstable; urgency=low * Enforce username length restriction * Fix quoting issues with conversion to lower case * Fix quoting of shell -z -- Stephen Hemminger Wed, 08 Sep 2010 09:41:40 -0700 vyatta-cfg-system (0.17.94) unstable; urgency=low * Change modprobe.d files to .conf * Update to current udev * Update sound blacklist fix -- Stephen Hemminger Tue, 07 Sep 2010 09:55:34 -0700 vyatta-cfg-system (0.17.93) unstable; urgency=low [ Stephen Hemminger ] * Remove ifDescr override [ An-Cheng Huang ] * fix squeeze paths -- An-Cheng Huang Fri, 03 Sep 2010 14:44:40 -0700 vyatta-cfg-system (0.17.92) unstable; urgency=low * Bugfix 5499: Fix restrictions on IPv6 addresses. -- Bob Gilligan Tue, 31 Aug 2010 02:58:11 -0700 vyatta-cfg-system (0.17.91) unstable; urgency=low [ Stephen Hemminger ] * Add dependency on libcap2-bin [ Bob Gilligan ] * Bugfix 6085: Use "-x" flag instead of "-r" to kill the old dhclient process -- Bob Gilligan Mon, 30 Aug 2010 02:33:54 -0700 vyatta-cfg-system (0.17.90) unstable; urgency=low * Add checking of port range * Add check for port range on SNMP listen port value * Generate interface description -- Stephen Hemminger Mon, 23 Aug 2010 15:03:23 -0700 vyatta-cfg-system (0.17.89) unstable; urgency=low * update help text to use val_help -- An-Cheng Huang Tue, 17 Aug 2010 15:31:11 -0700 vyatta-cfg-system (0.17.88) unstable; urgency=low * Don't delete existing root password -- Stephen Hemminger Tue, 17 Aug 2010 15:22:55 -0700 vyatta-cfg-system (0.17.87) unstable; urgency=low * Add vrrp parameters to transition script. -- Stig Thormodsrud Tue, 17 Aug 2010 11:59:45 -0700 vyatta-cfg-system (0.17.86) unstable; urgency=low * remove more low-level config dir usages -- An-Cheng Huang Mon, 16 Aug 2010 18:52:07 -0700 vyatta-cfg-system (0.17.85) unstable; urgency=low * remove low-level config dir usage -- An-Cheng Huang Mon, 16 Aug 2010 18:15:01 -0700 vyatta-cfg-system (0.17.84) unstable; urgency=low * remove low-level config dir usage -- An-Cheng Huang Mon, 16 Aug 2010 15:47:03 -0700 vyatta-cfg-system (0.17.83) unstable; urgency=low * remove "node.val" usages -- An-Cheng Huang Thu, 12 Aug 2010 14:13:07 -0700 vyatta-cfg-system (0.17.82) unstable; urgency=low * use listEffectiveNodes() from new API -- An-Cheng Huang Mon, 02 Aug 2010 17:17:30 -0700 vyatta-cfg-system (0.17.81) unstable; urgency=low * Bugfix 5964: Eliminate unnecessary version check. -- Bob Gilligan Mon, 02 Aug 2010 16:38:53 -0700 vyatta-cfg-system (0.17.80) unstable; urgency=low * new API change -- An-Cheng Huang Mon, 02 Aug 2010 15:45:23 -0700 vyatta-cfg-system (0.17.79) unstable; urgency=low * add comments and missing function -- An-Cheng Huang Fri, 30 Jul 2010 18:13:00 -0700 vyatta-cfg-system (0.17.78) unstable; urgency=low * Bugfix 5711: Don't allow special characters in image names. -- Bob Gilligan Wed, 28 Jul 2010 02:47:32 -0700 vyatta-cfg-system (0.17.77) unstable; urgency=low * new API changes -- An-Cheng Huang Fri, 30 Jul 2010 17:26:20 -0700 vyatta-cfg-system (0.17.76) unstable; urgency=low [ Stephen Hemminger ] * Change ranges for bridge parameters * Fix typo in last change [ Bob Gilligan ] * Bugfix 5929: Preserve SSH host keys during image installation. -- Bob Gilligan Tue, 27 Jul 2010 19:47:45 -0700 vyatta-cfg-system (0.17.75) unstable; urgency=low * UNRELEASED -- An-Cheng Huang Thu, 22 Jul 2010 17:23:36 -0700 vyatta-cfg-system (0.17.74) unstable; urgency=low * More fixes to standalone password reset -- Stephen Hemminger Thu, 22 Jul 2010 15:09:01 -0700 vyatta-cfg-system (0.17.73) unstable; urgency=low [ Stephen Hemminger ] * Make standalone password recovery more robust [ An-Cheng Huang ] * remove unused options -- An-Cheng Huang Thu, 22 Jul 2010 12:13:05 -0700 vyatta-cfg-system (0.17.72) unstable; urgency=low * Move input interface over to Qos package -- Stephen Hemminger Wed, 21 Jul 2010 17:46:50 -0700 vyatta-cfg-system (0.17.71) unstable; urgency=low * Use pgrep to count number of matching processes * Use val_help: for interface name help * Use expression to validate VRRP password * Add proxy-arp over bonding * Fix help completion text * Fix formatting of static-host mapping val help * Add completion for text fields with limited values * Fix completion on multi-type node -- Stephen Hemminger Wed, 21 Jul 2010 15:45:39 -0700 vyatta-cfg-system (0.17.70) unstable; urgency=low [ Stephen Hemminger ] * Fix language in help text for loadkey * Use val_help: for Ethernet interface parameters * bonding vif val_help * Loopback address node cleanup * Convert tunnel parameters to new help format * Convert public-keys help to new format * Revise static-host-mapping * Use val_help: features to format better * Convert syslog commands to new CLI help style [ An-Cheng Huang ] * fix typo, val_help, etc. [ Stephen Hemminger ] * Convert VRRP preempt to bool * Convert VRRP to new CLI help style [ Bob Gilligan ] * Bugfix 5512: Have grub.cfg use the vmlinuz and initrd.img symlinks if available -- Bob Gilligan Mon, 19 Jul 2010 17:45:16 -0700 vyatta-cfg-system (0.17.69) unstable; urgency=low [ Stephen Hemminger ] * Remove verbs from all help messages * Covert bonding mode to val_help * Use val_help: for interface MTU nodes * Bridge parameter node update * Use val_help in zone-policy * Fix old invalid email addresses in changelog [ An-Cheng Huang ] * fix typo [ Stephen Hemminger ] -- Stephen Hemminger Mon, 19 Jul 2010 11:08:12 -0700 vyatta-cfg-system (0.17.68) unstable; urgency=low * Add syntax validation for bridge STP parameters * Use val_help: for address nodes -- Stephen Hemminger Fri, 16 Jul 2010 17:30:20 -0700 vyatta-cfg-system (0.17.67) unstable; urgency=low * Bugfix 5557: Properly update initrd symlink. -- Bob Gilligan Wed, 14 Jul 2010 15:01:20 -0700 vyatta-cfg-system (0.17.66) unstable; urgency=low * Enable putting core files /var/core -- Stephen Hemminger Wed, 14 Jul 2010 16:25:22 -0700 vyatta-cfg-system (0.17.65) unstable; urgency=low * Bugfix 5845, 5557: Install vyatta-update-grub.pl in /opt/vyatta/sbin. -- Bob Gilligan Wed, 14 Jul 2010 15:45:28 -0700 vyatta-cfg-system (0.17.64) unstable; urgency=low * Bugfix 5557: Add script to help update grub after full upgrade. * Move vyatta-update-grub.pl to the vyatta-base package. * Revert "Move vyatta-update-grub.pl to the vyatta-base package." * Select kernel to boot based on current running kernel type. -- Bob Gilligan Wed, 14 Jul 2010 11:12:37 -0700 vyatta-cfg-system (0.17.63) unstable; urgency=low * Fix install-system if not saving old image config -- Stephen Hemminger Thu, 08 Jul 2010 09:44:16 -0700 vyatta-cfg-system (0.17.62) unstable; urgency=low * Don't need explict sync in init-floppy * Change user name validation * Allow incorrect user to be deleted -- Stephen Hemminger Tue, 06 Jul 2010 19:14:50 -0700 vyatta-cfg-system (0.17.61) unstable; urgency=low * Corrected the fix for bug 5408. -- Deepti Kulkarni Tue, 06 Jul 2010 16:40:24 +0000 vyatta-cfg-system (0.17.60) unstable; urgency=low * Update failover-mechanism sync-group CLI path and add -- Mohit Mehta Thu, 01 Jul 2010 17:40:10 -0700 vyatta-cfg-system (0.17.59) unstable; urgency=low * Fix 5675: clearing vrrp master for an interface group removes sync- group config -- Stig Thormodsrud Thu, 01 Jul 2010 14:11:18 -0700 vyatta-cfg-system (0.17.58) unstable; urgency=low * Touch file before setting capability -- Stephen Hemminger Thu, 01 Jul 2010 13:37:07 -0700 vyatta-cfg-system (0.17.57) unstable; urgency=low [ root ] * fix for bug 5408. [ Deepti Kulkarni ] * Revert "fix for bug 5408." * fix for bug 5408. -- Deepti Kulkarni Thu, 01 Jul 2010 16:53:34 +0000 vyatta-cfg-system (0.17.56) unstable; urgency=low [ Stephen Hemminger ] * Remove sudo from tunnel command * Fix path to ipset [ Michael Larson ] * fix for bug 5663 -- Michael Larson Mon, 21 Jun 2010 11:09:56 -0700 vyatta-cfg-system (0.17.55) unstable; urgency=low * initial support for gre-bridge tunnels. -- Robert Bays Thu, 17 Jun 2010 23:33:45 -0700 vyatta-cfg-system (0.17.54) unstable; urgency=low * Remove sudo from ip command * Remove unnecessary :expression: syntax * Remove sudo from brctl * Remove capability from ping * Don't need audit write on vbash -- Stephen Hemminger Thu, 17 Jun 2010 14:46:35 -0700 vyatta-cfg-system (0.17.53) unstable; urgency=low * * make vrrp work with conntrack-sync * * perltidy vyatta-keepalived.pl -- Mohit Mehta Wed, 09 Jun 2010 15:01:47 -0700 vyatta-cfg-system (0.17.52) unstable; urgency=low * Add skip option to vyatta-interfaces -- Stephen Hemminger Mon, 07 Jun 2010 16:28:13 -0700 vyatta-cfg-system (0.17.51) unstable; urgency=low * Using "send dhcp6.oro" is no longer required in config file. -- Bob Gilligan Sun, 30 May 2010 07:14:32 -0700 vyatta-cfg-system (0.17.50) unstable; urgency=low * Fix use of bareword file handles * Set file capability attributes * Add pam_cap capability configuration -- Stephen Hemminger Fri, 04 Jun 2010 14:10:09 -0700 vyatta-cfg-system (0.17.49) unstable; urgency=low * move list functions to vrrp perl module so other scripts can use it as well -- Mohit Mehta Thu, 03 Jun 2010 16:32:05 -0700 vyatta-cfg-system (0.17.48) unstable; urgency=low * fix for bug 5656 -- An-Cheng Huang Thu, 03 Jun 2010 14:55:46 -0700 vyatta-cfg-system (0.17.47) unstable; urgency=low * Fix 5521: Cannot Delete vif with vrrp configured. -- Stig Thormodsrud Tue, 01 Jun 2010 15:24:45 -0700 vyatta-cfg-system (0.17.46) unstable; urgency=low * Move DHCPv6 client configuration to this package and restructre parameters. -- Bob Gilligan Wed, 26 May 2010 16:12:45 -0700 vyatta-cfg-system (0.17.45) unstable; urgency=low * Don't enable PAM Radius by default -- Stephen Hemminger Mon, 24 May 2010 10:46:08 -0700 vyatta-cfg-system (0.17.44) unstable; urgency=low * don't start conntrackd itself -- Mohit Mehta Thu, 20 May 2010 19:29:10 -0700 vyatta-cfg-system (0.17.43) unstable; urgency=low * Add enable-proxy-arp to vif interface. -- Stig Thormodsrud Wed, 19 May 2010 20:16:12 -0700 vyatta-cfg-system (0.17.42) unstable; urgency=low * Change SNMP community handling * Fix syntax of default listen address -- Stephen Hemminger Fri, 14 May 2010 11:01:48 -0700 vyatta-cfg-system (0.17.41) unstable; urgency=low * Revert "Snmp Ipv6 support" * Better version of SNMP IPv6 support * Allow configuring/restricting SNMP listen address -- Stephen Hemminger Wed, 12 May 2010 21:02:35 -0700 vyatta-cfg-system (0.17.40) unstable; urgency=low * Snmp Ipv6 support * Show progress bar when copying filesystem -- Stephen Hemminger Wed, 12 May 2010 14:34:54 -0700 vyatta-cfg-system (0.17.39) unstable; urgency=low * Preserve file capablities and attributes during install-system * Preserve file attributes of root files -- Stephen Hemminger Fri, 07 May 2010 15:25:22 -0700 vyatta-cfg-system (0.17.38) unstable; urgency=low * Add code to check digital signature of image files. -- Bob Gilligan Mon, 03 May 2010 17:21:10 -0700 vyatta-cfg-system (0.17.37) unstable; urgency=low * Allow user to name system images when installing them. -- Bob Gilligan Fri, 30 Apr 2010 15:48:57 -0700 vyatta-cfg-system (0.17.36) unstable; urgency=low * Ignore comments in level file * Set capabilities on standard utilities * Make interface help completion strings consistent * Revert "Set capabilities on standard utilities" -- Stephen Hemminger Tue, 27 Apr 2010 15:27:49 -0700 vyatta-cfg-system (0.17.35) unstable; urgency=low * Configure IFB devices earlier in boot -- Stephen Hemminger Fri, 16 Apr 2010 11:35:23 -0700 vyatta-cfg-system (0.17.34) unstable; urgency=low * Rename in0 to ifb0 -- Stephen Hemminger Thu, 15 Apr 2010 13:16:38 -0700 vyatta-cfg-system (0.17.33) unstable; urgency=low * For Bug 5625 Not ready for DNSSEC implementation -- Mohit Mehta Wed, 14 Apr 2010 16:22:44 -0700 vyatta-cfg-system (0.17.32) unstable; urgency=low * increase xen hypervisor heap size -- An-Cheng Huang Fri, 09 Apr 2010 18:35:29 -0700 vyatta-cfg-system (0.17.31) unstable; urgency=low * Add input pseudo-interface configuration -- Stephen Hemminger Tue, 06 Apr 2010 09:27:17 -0700 vyatta-cfg-system (0.17.30) unstable; urgency=low * Use 3 arg open * Use 3 arg open to create pipe * Ignore errors from ethtool when setting speed/duplex -- Stephen Hemminger Mon, 05 Apr 2010 22:20:49 -0700 vyatta-cfg-system (0.17.29) unstable; urgency=low * Fail gracefully if path is unknown -- Stephen Hemminger Mon, 05 Apr 2010 16:17:35 -0700 vyatta-cfg-system (0.17.28) unstable; urgency=low * Improve wording of config info save dialog. -- Bob Gilligan Tue, 30 Mar 2010 12:02:35 -0700 vyatta-cfg-system (0.17.27) unstable; urgency=low * Ignore setting CPU affinity on UP systems * Fix test for UP -- Stephen Hemminger Mon, 29 Mar 2010 16:34:57 -0700 vyatta-cfg-system (0.17.26) unstable; urgency=low * run snmpd as user snmp -- An-Cheng Huang Wed, 24 Mar 2010 19:08:22 -0700 vyatta-cfg-system (0.17.25) unstable; urgency=low * Fix Bug 5487 http redirect url address placed on the router gets blocked by -- Mohit Mehta Wed, 24 Mar 2010 15:31:16 -0700 vyatta-cfg-system (0.17.24) unstable; urgency=low * Fix Bug 5386 L2TP will work only the first time Vyatta is booted -- Mohit Mehta Sat, 20 Mar 2010 22:43:27 -0700 vyatta-cfg-system (0.17.23) unstable; urgency=low [ Michael Larson ] * fixes commit warning when run invoked via the api--getlogin() may return an undefined value as the process is a child process [ Bob Gilligan ] * Bugfix 5449: Maintain "console affinity" when adding a new image. -- Bob Gilligan Thu, 18 Mar 2010 18:03:55 -0700 vyatta-cfg-system (0.17.22) unstable; urgency=low * Remove Radius Server config file on reboot * Handle devices that do not report ethtool -- Stephen Hemminger Wed, 17 Mar 2010 11:29:44 -0700 vyatta-cfg-system (0.17.21) unstable; urgency=low * Make /var/run/vyatta and /var/log/vyatta * Use userdel -f to force removal of user * Better version of forcing user logout -- Stephen Hemminger Mon, 15 Mar 2010 10:45:04 -0700 vyatta-cfg-system (0.17.20) unstable; urgency=low [ Stephen Hemminger ] * Disable SELinux during password reset * Fix case of VGA_LOGO option [ Mohit Mehta ] * * Fix BZ 5334 services start automatically on boot up after upgrade to kenwood [ Stephen Hemminger ] * Run partition editor with script flag to avoid prompting user * Force user process to die -- Stephen Hemminger Fri, 12 Mar 2010 10:01:06 -0800 vyatta-cfg-system (0.17.19) unstable; urgency=low * Bugfix 5021: Make smp_affinity configuration tolerant of failures. -- Bob Gilligan Tue, 09 Mar 2010 15:49:56 -0800 vyatta-cfg-system (0.17.18) unstable; urgency=low [ Stephen Hemminger ] * Set primary interface after bond-group is initialized [ Bob Gilligan ] * Bugfix 5424: Allow image with same version to be added to disk-based install -- Bob Gilligan Tue, 09 Mar 2010 11:08:49 -0800 vyatta-cfg-system (0.17.17) unstable; urgency=low * Use more reliable method for determining system version. -- Bob Gilligan Mon, 08 Mar 2010 17:37:20 -0800 vyatta-cfg-system (0.17.16) unstable; urgency=low * Bugfix 5416: determine system version from version of vyatta-version package -- Bob Gilligan Mon, 08 Mar 2010 16:19:08 -0800 vyatta-cfg-system (0.17.15) unstable; urgency=low * Bugfix 5360: Get name of image from correct source. -- Bob Gilligan Mon, 08 Mar 2010 14:51:58 -0800 vyatta-cfg-system (0.17.14) unstable; urgency=low [ Stephen Hemminger ] * Fixup xl2tpd init during install [ Bob Gilligan ] * Bugfix 5414: Use correct install root reference when copying back SSH keys. -- Bob Gilligan Mon, 08 Mar 2010 14:17:56 -0800 vyatta-cfg-system (0.17.13) unstable; urgency=low * Bugfix 5413: Determine system version from vyatta-version package. -- Bob Gilligan Fri, 05 Mar 2010 13:07:33 -0800 vyatta-cfg-system (0.17.12) unstable; urgency=low * Bugfix 5404: Handle RAID re-sync on image-installed systems. -- Bob Gilligan Wed, 03 Mar 2010 18:09:55 -0800 vyatta-cfg-system (0.17.11) unstable; urgency=low * Bugfix 5377: strict-dad must be applied before interfaces are configured -- Bob Gilligan Mon, 01 Mar 2010 14:19:23 -0800 vyatta-cfg-system (0.17.10) unstable; urgency=low * Bugfix 5217: Don't use the "-#" option to curl. It runs slow on serial ports. -- Bob Gilligan Thu, 25 Feb 2010 11:50:19 -0800 vyatta-cfg-system (0.17.9) unstable; urgency=low * Bugfix 5377: Add parameter to control behavior when DAD fails. -- Bob Gilligan Tue, 23 Feb 2010 15:53:53 -0800 vyatta-cfg-system (0.17.8) unstable; urgency=low [ Stephen Hemminger ] * Handle empty set of public keys [ Stig Thormodsrud ] * Fix 5157: dhcpclient doesn't work when alternative mac address specified on bootup -- Stig Thormodsrud Sun, 21 Feb 2010 20:21:32 -0800 vyatta-cfg-system (0.17.7) unstable; urgency=low * Fix Bug 5064 can't delete bridge group and membership in one commit -- Mohit Mehta Thu, 18 Feb 2010 17:28:54 -0800 vyatta-cfg-system (0.17.6) unstable; urgency=low * UNRELEASED -- An-Cheng Huang Wed, 17 Feb 2010 16:13:35 -0800 vyatta-cfg-system (0.17.5) unstable; urgency=low * Handle DSA keys * Add support for options in keyfile -- Stephen Hemminger Wed, 17 Feb 2010 12:52:02 -0800 vyatta-cfg-system (0.17.4) unstable; urgency=low * Speed up VIF creation * Check current status (not configured value) when enabling vlan device * Use template to do syntax checks on ethernet device name -- Stephen Hemminger Tue, 16 Feb 2010 17:37:10 -0800 vyatta-cfg-system (0.17.3) unstable; urgency=low * Don't allow format strings in snmp-community * Add syntax check for vif name where non-vif expected * Use die function for failures -- Stephen Hemminger Tue, 16 Feb 2010 13:58:55 -0800 vyatta-cfg-system (0.17.2) unstable; urgency=low * Bugfix 5327: Don't try to save config from images with none. -- Bob Gilligan Tue, 16 Feb 2010 11:57:24 -0800 vyatta-cfg-system (0.17.1) unstable; urgency=low * use more specific version before which modprobe files in vyatta-cfg r2b replaced -- Mohit Mehta Fri, 12 Feb 2010 13:53:27 -0800 vyatta-cfg-system (0.16.43) unstable; urgency=low * fix bug 5334 services start automatically on boot up post upgrade to kenwood -- Mohit Mehta Fri, 12 Feb 2010 11:29:49 -0800 vyatta-cfg-system (0.16.42) unstable; urgency=low * Bugfix 5117: Preserve config files from previous image installation. -- Bob Gilligan Thu, 11 Feb 2010 16:06:16 -0800 vyatta-cfg-system (0.16.41) unstable; urgency=low * Fix bug 5325 vyatta-cfg-system fails to upgrade during full-upgrade VC5 to VC6 -- Mohit Mehta Wed, 10 Feb 2010 12:21:52 -0800 vyatta-cfg-system (0.16.40) unstable; urgency=low * Remove vyatta-ofr on upgrade * Remove IPv6 address_flush sysctl -- Stephen Hemminger Tue, 09 Feb 2010 15:17:46 -0800 vyatta-cfg-system (0.16.39) unstable; urgency=low * add dependency on vyatta-biosdevname -- An-Cheng Huang Mon, 08 Feb 2010 12:53:02 -0800 vyatta-cfg-system (0.16.38) unstable; urgency=low * Bugfix 5225: Include the OS version number in the grub menu entry. -- Bob Gilligan Mon, 08 Feb 2010 12:04:44 -0800 vyatta-cfg-system (0.16.37) unstable; urgency=low * Bugfix 5120: Use biosdevname to generate the canonical name for an interface. -- Bob Gilligan Fri, 05 Feb 2010 16:49:36 -0800 vyatta-cfg-system (0.16.36) unstable; urgency=low * Force vyatta-cfg/vyatta-cfg-system version synchronization -- Stephen Hemminger Fri, 05 Feb 2010 12:31:10 -0800 vyatta-cfg-system (0.16.35) unstable; urgency=low * Set system host-name and time-zone first -- Stephen Hemminger Wed, 03 Feb 2010 14:39:44 -0800 vyatta-cfg-system (0.16.34) unstable; urgency=low * Change owner of created authorized key file * Move modprobe.d/no-copybreak from vyatta-cfg -- Stephen Hemminger Wed, 03 Feb 2010 13:37:20 -0800 vyatta-cfg-system (0.16.33) unstable; urgency=low * Fix password-authentication setup in sshd * Bug in handling local key file * Run login update as root -- Stephen Hemminger Tue, 02 Feb 2010 15:12:07 -0800 vyatta-cfg-system (0.16.32) unstable; urgency=low * Add help for system ip arp * Add help string for system ip neighbor * Static host-name mapping changes * Don't remove users home directory -- Stephen Hemminger Tue, 02 Feb 2010 10:52:39 -0800 vyatta-cfg-system (0.16.31) unstable; urgency=low * Allow local user (non vbash) accounts * Make message clearer -- Stephen Hemminger Wed, 27 Jan 2010 18:21:04 -0800 vyatta-cfg-system (0.16.30) unstable; urgency=low * Don't delete non-user accounts -- Stephen Hemminger Wed, 27 Jan 2010 09:39:33 -0800 vyatta-cfg-system (0.16.29) unstable; urgency=low * Don't allow vyatta configured accounts to overlap internal accounts * Reindent user account module * Change function names in User.pm * Refactor user update * Add additional check that new user doesn't exist in NSS * Get rid of protected-users file -- Stephen Hemminger Tue, 26 Jan 2010 18:30:04 -0800 vyatta-cfg-system (0.16.28) unstable; urgency=low * Bugfix 5229: Save old config info when installing on pre-existing RAID group. -- Bob Gilligan Tue, 26 Jan 2010 16:25:04 -0800 vyatta-cfg-system (0.16.27) unstable; urgency=low * Bugfix 5220: Use correct path to config directory on installed image. -- Bob Gilligan Tue, 26 Jan 2010 14:19:59 -0800 vyatta-cfg-system (0.16.26) unstable; urgency=low * Bugfix 5232: Correctly handle case where user doesn't want to save SSH keys -- Bob Gilligan Tue, 26 Jan 2010 12:03:23 -0800 vyatta-cfg-system (0.16.25) unstable; urgency=low [ Stephen Hemminger ] * Fix typo in PermitRoot setup. -- Stig Thormodsrud Mon, 25 Jan 2010 21:24:55 -0800 vyatta-cfg-system (0.16.24) unstable; urgency=low * Bugfix 5240: Prevent re-installation of same version on running systems -- Bob Gilligan Mon, 25 Jan 2010 17:23:21 -0800 vyatta-cfg-system (0.16.23) unstable; urgency=low * Remove duplicate crontab and stop munging /etc/crontab. -- Stig Thormodsrud Mon, 25 Jan 2010 15:13:09 -0800 vyatta-cfg-system (0.16.22) unstable; urgency=low * Fix allow-root for telnet/ssh -- Stephen Hemminger Sun, 24 Jan 2010 22:27:33 -0800 vyatta-cfg-system (0.16.21) unstable; urgency=low * Set IPV6 parameters in rl-system.init -- Stephen Hemminger Thu, 21 Jan 2010 11:24:44 -0800 vyatta-cfg-system (0.16.20) unstable; urgency=low [ Stephen Hemminger ] * Fix typo in install-image [ Bob Gilligan ] * Bugfix 5162: Make disabling flow control work at boot time. -- Bob Gilligan Tue, 19 Jan 2010 17:37:10 -0800 vyatta-cfg-system (0.16.19) unstable; urgency=low [ Jon Andersson ] * Restiction on filtering of udev rules -- Stig Thormodsrud Tue, 19 Jan 2010 17:01:50 -0800 vyatta-cfg-system (0.16.18) unstable; urgency=low [ Stephen Hemminger ] * Restrict radius-server timeout value [ Robert Bays ] * fix bug 5226: Hostname does not allow number as first char [ Stephen Hemminger ] * Change how IPV4/IPV6 configuration values are done -- Stephen Hemminger Tue, 19 Jan 2010 17:00:39 -0800 vyatta-cfg-system (0.16.17) unstable; urgency=low * Fix snmp trap-source -- Stephen Hemminger Mon, 18 Jan 2010 19:01:44 -0800 vyatta-cfg-system (0.16.16) unstable; urgency=low * Fix typo in community for trap-target -- Stephen Hemminger Mon, 18 Jan 2010 18:35:59 -0800 vyatta-cfg-system (0.16.15) unstable; urgency=low * Bugfix 5220: Save config information from previous image-based install. -- Bob Gilligan Mon, 18 Jan 2010 18:03:59 -0800 vyatta-cfg-system (0.16.14) unstable; urgency=low * Add sysctl to control IPV6 address flush -- Stephen Hemminger Thu, 14 Jan 2010 14:35:01 -0800 vyatta-cfg-system (0.16.13) unstable; urgency=low * Add support for trap community and port * Add support trap source address -- Stephen Hemminger Wed, 13 Jan 2010 19:54:16 -0800 vyatta-cfg-system (0.16.12) unstable; urgency=low * Don't allow installation to proceed if MD5 checksum errors are found. -- Bob Gilligan Wed, 13 Jan 2010 16:55:41 -0800 vyatta-cfg-system (0.16.11) unstable; urgency=low * Switch from wget to curl since the latter supports more URL methods. -- Bob Gilligan Fri, 08 Jan 2010 17:15:36 -0800 vyatta-cfg-system (0.16.10) unstable; urgency=low * Updates to SNMP link state trap -- Stephen Hemminger Wed, 06 Jan 2010 14:37:20 -0800 vyatta-cfg-system (0.16.9) unstable; urgency=low * Validate MD5 checksums on ISO file before proceeding with installation. -- Bob Gilligan Wed, 06 Jan 2010 14:32:18 -0800 vyatta-cfg-system (0.16.8) unstable; urgency=low * Do loopback before other interfaces * Remove snmpd.conf on deletion * Cleanup SNMP config file generation * SNMP: Merge common code for rand hex number * Change 'protocols snmp' to 'service snmp' * update version * Need to be root to remove snmpd.conf -- Stephen Hemminger Tue, 05 Jan 2010 18:39:32 -0800 vyatta-cfg-system (0.16.7) unstable; urgency=low * Add support for fetching ISO file based on URL. -- Bob Gilligan Wed, 23 Dec 2009 16:17:40 -0800 vyatta-cfg-system (0.16.6) unstable; urgency=low * Set default to only ARP if IP address matches received interface * Handle default of auto -- Stephen Hemminger Wed, 23 Dec 2009 10:49:38 -0800 vyatta-cfg-system (0.16.5) unstable; urgency=low * Update snmp template * Remove old init code * Read Vyatta version from file -- Stephen Hemminger Tue, 22 Dec 2009 20:59:10 -0800 vyatta-cfg-system (0.16.4) unstable; urgency=low * Bring device to up state when removed from bond -- Stephen Hemminger Tue, 22 Dec 2009 14:53:03 -0800 vyatta-cfg-system (0.16.3) unstable; urgency=low * Don't allow setting speed/duplex if hardware doesn't support it * Fix return of dhcp start client. * Mark banner script executable * Ignore more debian build files -- Stephen Hemminger Tue, 22 Dec 2009 14:02:55 -0800 vyatta-cfg-system (0.16.2) unstable; urgency=low * allow vyatta-cfg-system to replace interface files in older versions of -- Mohit Mehta Tue, 22 Dec 2009 11:45:39 -0800 vyatta-cfg-system (0.16.1) unstable; urgency=low * UNRELEASED -- Stephen Hemminger Mon, 21 Dec 2009 13:15:00 -0800 vyatta-cfg-system (0.16) unstable; urgency=low * Sync versions with vyatta-cfg -- Stephen Hemminger Mon, 21 Dec 2009 13:14:45 -0800 vyatta-cfg-system (0.15.127) unstable; urgency=low * Move interface support from vyatta-cfg to vyatta-cfg-system * Fix command-with-path-in-maintainer-script postinst:158 /usr/sbin/dpkg-reconfigure * Add vyatta-interfaces.pl to build -- Stephen Hemminger Mon, 21 Dec 2009 12:38:05 -0800 vyatta-cfg-system (0.15.126) unstable; urgency=low * User deletion update * Block passwd command for non-root user -- Stephen Hemminger Fri, 18 Dec 2009 14:56:43 -0800 vyatta-cfg-system (0.15.125) unstable; urgency=low * Re-enable frame-buffer on console * Fix install-image to save config/keys * Ignore errors from chmod/chown if ssh keys don't exist -- Stephen Hemminger Mon, 14 Dec 2009 16:57:26 -0800 vyatta-cfg-system (0.15.124) unstable; urgency=low * The protected-users file does not need to be made during install * Redefine meaning of protected-user -- Stephen Hemminger Wed, 09 Dec 2009 14:53:06 -0800 vyatta-cfg-system (0.15.123) unstable; urgency=low * Keep udev from borking wireless device names * Allow root account to not exist * Force root account to have disabled password -- Stephen Hemminger Tue, 08 Dec 2009 15:03:25 -0800 vyatta-cfg-system (0.15.122) unstable; urgency=low * don't block passwd with pam * Fix configure of user -- Stephen Hemminger Mon, 07 Dec 2009 11:41:33 -0800 vyatta-cfg-system (0.15.121) unstable; urgency=low * Fix load user key script * Add back public-key templates * Fix code that generates authorized keys -- Stephen Hemminger Fri, 04 Dec 2009 20:25:12 -0800 vyatta-cfg-system (0.15.120) unstable; urgency=low * Oops forgot to update installed version * Rearrange the public-key configuration schema * Block user from changing name or password -- Stephen Hemminger Fri, 04 Dec 2009 15:47:22 -0800 vyatta-cfg-system (0.15.119) unstable; urgency=low * Change telnet allow-root to existance (instead of boolean) -- Stephen Hemminger Fri, 04 Dec 2009 09:54:03 -0800 vyatta-cfg-system (0.15.118) unstable; urgency=low * Fix some file headers that cause build warnings * Add dependency on adduser -- Stephen Hemminger Thu, 03 Dec 2009 16:29:30 -0800 vyatta-cfg-system (0.15.117) unstable; urgency=low * SSH enhancements * Require key-type to be set. * Update .ssh/authorized_keys as part of the login update * Set modes of created authorization key (and directory) * Add script for loading public key * Add script for loading public key * Preserve ssh host keys in install-image -- Stephen Hemminger Thu, 03 Dec 2009 16:20:51 -0800 vyatta-cfg-system (0.15.116) unstable; urgency=low * Use ext3 all the time -- Stephen Hemminger Wed, 02 Dec 2009 18:18:31 -0800 vyatta-cfg-system (0.15.115) unstable; urgency=low [ Stephen Hemminger ] * Pass more info to login scripts * Don't lose user customization to pam-auth * Simply Radius server update [ Bob Gilligan ] * Changes related to co-ordination between kernel parameters and radvd. -- Bob Gilligan Wed, 02 Dec 2009 16:48:52 -0800 vyatta-cfg-system (0.15.114) unstable; urgency=low [ Stephen Hemminger ] * Add ability to disable password authentication [ Bob Gilligan ] * Co-ordinate global and per-interface IPv6 forwarding control. -- Bob Gilligan Wed, 02 Dec 2009 11:50:31 -0800 vyatta-cfg-system (0.15.113) unstable; urgency=low * Avoid updating files on boot * Get rid of warning on package update * Save SSH keys on re-install -- Stephen Hemminger Tue, 01 Dec 2009 14:14:00 -0800 vyatta-cfg-system (0.15.112) unstable; urgency=low * Add sync after config save -- Stephen Hemminger Tue, 01 Dec 2009 09:53:35 -0800 vyatta-cfg-system (0.15.111) unstable; urgency=low * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 16:40:47 -0800 vyatta-cfg-system (0.15.110) unstable; urgency=low [ Stephen Hemminger ] * Remove Radius server on reboot [ Michael Larson ] * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 16:33:59 -0800 vyatta-cfg-system (0.15.109) unstable; urgency=low * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 15:55:21 -0800 vyatta-cfg-system (0.15.108) unstable; urgency=low * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 15:36:33 -0800 vyatta-cfg-system (0.15.107) unstable; urgency=low * Add user tss for udev -- Stephen Hemminger Thu, 19 Nov 2009 16:41:35 -0800 vyatta-cfg-system (0.15.106) unstable; urgency=low * Mount floppy with dirsync -- Stephen Hemminger Wed, 18 Nov 2009 21:25:57 -0800 vyatta-cfg-system (0.15.105) unstable; urgency=low * Don't start hostapd at boot -- Stephen Hemminger Tue, 17 Nov 2009 16:26:26 -0800 vyatta-cfg-system (0.15.104) unstable; urgency=low * Add start_offset value to log message when partion attempt fails. -- Bob Gilligan Fri, 13 Nov 2009 17:46:42 -0800 vyatta-cfg-system (0.15.103) unstable; urgency=low * Add start_offset value to log message when partion attempt fails. -- Bob Gilligan Fri, 13 Nov 2009 16:39:04 -0800 vyatta-cfg-system (0.15.102) unstable; urgency=low * dependency update -- Michael Larson Fri, 13 Nov 2009 13:45:26 -0800 vyatta-cfg-system (0.15.101) unstable; urgency=low * Remove blank line * Show dependency on pam version -- Stephen Hemminger Wed, 11 Nov 2009 17:09:29 -0800 vyatta-cfg-system (0.15.100) unstable; urgency=low * copy the whole config directory during install -- An-Cheng Huang Tue, 10 Nov 2009 14:08:59 -0800 vyatta-cfg-system (0.15.99) unstable; urgency=low [ An-Cheng Huang ] * use new vyatta-union arg to reduce kernel cmdline length. [ Robert Bays ] * Fix library include -- Robert Bays Fri, 06 Nov 2009 05:53:10 -0800 vyatta-cfg-system (0.15.98) unstable; urgency=low [ Stephen Hemminger ] * Remove blank line * Fix pam-auth-update errors from radius * Move user configuration information to files * radius: only try first password if first module [ An-Cheng Huang ] * move custom script to custom repo -- An-Cheng Huang Thu, 05 Nov 2009 15:01:40 -0800 vyatta-cfg-system (0.15.97) unstable; urgency=low * Fix 5063: committing "set interfaces ethernet <> bridge-group bridge <>" got "invalid variable reference (invalid format)" -- Stig Thormodsrud Mon, 02 Nov 2009 18:31:22 -0800 vyatta-cfg-system (0.15.96) unstable; urgency=low [ An-Cheng Huang ] * use top-level pid for progress indicator [ Stephen Hemminger ] * Don't want/need --package option to pam-auth-update * Reset PAM configuration on boot * rename pam-radius to pam_radius.cfg -- Stephen Hemminger Mon, 02 Nov 2009 17:28:17 -0800 vyatta-cfg-system (0.15.95) unstable; urgency=low [ David S. Madole ] * Add VRRP capability to bonding interfaces and vifs of bonding interfaces. [ Stig Thormodsrud ] * Convert keepalived to use Interface infrastructure. * Add priority for bonding vrrp nodes. * Fix interface carrier status. * Fix 'show vrrp summary' showing last vip 1st * Using Interface.pm infrastructure to detect vif on eth|bond interface. -- Stig Thormodsrud Sun, 01 Nov 2009 14:59:29 -0800 vyatta-cfg-system (0.15.94) unstable; urgency=low [ An-Cheng Huang ] * add unified install-image [ slioch ] * added missed vrrp priorities. -- slioch Sat, 31 Oct 2009 14:02:41 -0700 vyatta-cfg-system (0.15.93) unstable; urgency=low * radius client: try first password only if not first * Shut up debconf when installing pam radius * radius-server: shutup debconf dialog * radius: add missing space -- Stephen Hemminger Fri, 30 Oct 2009 13:37:15 -0700 vyatta-cfg-system (0.15.92) unstable; urgency=low * Dont start radvd on boot -- Stephen Hemminger Thu, 29 Oct 2009 11:16:33 -0700 vyatta-cfg-system (0.15.91) unstable; urgency=low * Fix description of vif bonding * Use pam-auth-update to configure radius -- Stephen Hemminger Tue, 27 Oct 2009 18:52:45 -0700 vyatta-cfg-system (0.15.90) unstable; urgency=low * move priority after tag nodes. -- slioch Wed, 21 Oct 2009 09:12:23 -0700 vyatta-cfg-system (0.15.89) unstable; urgency=low * move priority after multi tags -- slioch Tue, 20 Oct 2009 21:22:35 -0700 vyatta-cfg-system (0.15.88) unstable; urgency=low * partial fix for bug 4903. -- slioch Tue, 20 Oct 2009 16:11:07 -0700 vyatta-cfg-system (0.15.87) unstable; urgency=low * add .merge-branch-exclude * update .merge-branch-exclude -- An-Cheng Huang Wed, 14 Oct 2009 13:16:18 -0700 vyatta-cfg-system (0.15.86) unstable; urgency=low [ Robert Bays ] * limit xen dom0 memory to 512meg -- Stephen Hemminger Tue, 13 Oct 2009 16:42:00 -0700 vyatta-cfg-system (0.15.85) unstable; urgency=low * add override mechanism for protected users -- An-Cheng Huang Mon, 05 Oct 2009 19:20:44 -0700 vyatta-cfg-system (0.15.84) unstable; urgency=low * use pattern instead of exec -- Mohit Mehta Fri, 02 Oct 2009 18:31:15 -0700 vyatta-cfg-system (0.15.83) unstable; urgency=low * Mount floppy with safer options -- Stephen Hemminger Thu, 01 Oct 2009 12:05:29 -0700 vyatta-cfg-system (0.15.82) unstable; urgency=low [ Stephen Hemminger ] * Cleanup all vbash users [ Bob Gilligan ] * Bugfix 4951: Add configuration parameter to blacklist the IPv6 module. -- Bob Gilligan Thu, 24 Sep 2009 16:05:25 -0700 vyatta-cfg-system (0.15.81) unstable; urgency=low * Bugfix 4892: Add a config parameter to disable IPv6 -- Bob Gilligan Wed, 23 Sep 2009 16:27:00 -0700 vyatta-cfg-system (0.15.80) unstable; urgency=low * Bugfix 4951: Don't fail if IPv6 kernel module is not loaded. -- Bob Gilligan Tue, 22 Sep 2009 15:56:58 -0700 vyatta-cfg-system (0.15.79) unstable; urgency=low * allow install on old compaq smart-array -- Robert Bays Mon, 14 Sep 2009 09:10:18 -0700 vyatta-cfg-system (0.15.78) unstable; urgency=low * Fix Bug 4919 "service dns" branch of configuration file missing ... -- Mohit Mehta Fri, 11 Sep 2009 18:11:30 -0700 vyatta-cfg-system (0.15.77) unstable; urgency=low * User group fixes * Add operators to vyattaop group * If configuration is wrong just skip user don't die * Delete vyatta users not in configuration -- Stephen Hemminger Fri, 11 Sep 2009 16:31:43 -0700 vyatta-cfg-system (0.15.76) unstable; urgency=low * Invert test for livecd -- Stephen Hemminger Fri, 11 Sep 2009 08:31:19 -0700 vyatta-cfg-system (0.15.75) unstable; urgency=low * Move check for livecd install to before filesystem intialization -- Stephen Hemminger Thu, 10 Sep 2009 15:44:25 -0700 vyatta-cfg-system (0.15.74) unstable; urgency=low * Allow null description on device -- Stephen Hemminger Wed, 09 Sep 2009 14:39:39 -0700 vyatta-cfg-system (0.15.73) unstable; urgency=low [ Bob Gilligan ] * Bugfix 4916, 4917: Exit correctly when vyatta user doesn't exist. Add timeout. [ Stephen Hemminger ] * Enforce syntax checking on password [ Bob Gilligan ] -- Bob Gilligan Fri, 04 Sep 2009 02:56:14 -0700 vyatta-cfg-system (0.15.72) unstable; urgency=low * Revert "Validate encrypted password field" -- Stephen Hemminger Fri, 04 Sep 2009 09:35:58 -0700 vyatta-cfg-system (0.15.71) unstable; urgency=low * Don't change name of non-ethernet devices * Validate encrypted password field -- Stephen Hemminger Thu, 03 Sep 2009 11:18:24 -0700 vyatta-cfg-system (0.15.70) unstable; urgency=low * Bonding: load module with MII monitor enabled * bonding: remove primary slave last * BONDING: handle change of bond-group * BONDING: handle change of bond-group * BONDING: fix error messages * Fix bonding group setup * Remove slaves before changing mode -- Stephen Hemminger Tue, 04 Aug 2009 16:27:17 -0700 vyatta-cfg-system (0.15.69) unstable; urgency=low * Fix uninitialized variable. * Fix 4766: can't set login banners "Can't locate Vyatta/Login/Banner.pm" -- Stig Thormodsrud Thu, 30 Jul 2009 16:27:16 -0700 vyatta-cfg-system (0.15.68) unstable; urgency=low * Bugfix 4700: Move processing to "end" field so that param modifications are handled. -- Bob Gilligan Thu, 30 Jul 2009 14:09:49 -0700 vyatta-cfg-system (0.15.67) unstable; urgency=low [ Stig Thormodsrud ] * Fix 4748: Pre-login message files (/etc/issue,/etc/issue.net) are -- Bob Gilligan Thu, 30 Jul 2009 13:59:35 -0700 vyatta-cfg-system (0.15.66) unstable; urgency=low * fix undefined array ref -- An-Cheng Huang Mon, 27 Jul 2009 18:06:59 -0700 vyatta-cfg-system (0.15.65) unstable; urgency=low [ Stephen Hemminger ] * Fix User Login configurator * Make Radius server work * Change API for login modules * Handle deletion of radius (or other) server * Avoid rewriting radius config unless needed * Fix multi-nodes for address using update tag * Fix some more update tag * Fix generation of syslog host targets * Change version of system config [ An-Cheng Huang ] * Use sysfs for bonding device control [ Stephen Hemminger ] * Fix help/completion for xor-hash * Remove invalid buried templates [ An-Cheng Huang ] * Revert earlier change -- keep debian net.agent [ Stephen Hemminger ] * Remove ability to add vif to macvlan * Convert bonding to use sysfs instead of ifenslave * Add ifupdown package * move acpid and ifupdown from Suggest to Depends * Make telnet management smarter [ Bob Gilligan ] * Bugfix 4592: Generate NTP config file from Vyatta configuration parameters. [ Mark O'Brien ] * Change interface state to down, add to bond group, change state to up. * Added link detect to ethernet bonded vlan interfaces. * Fix 'sh: line 1:' error ing bug 4655. * Allow user to select round-robin mode. [ Stephen Hemminger ] * Block creating vif until after slaves present * Allow disable of bonding interface with VIF * Revert "Allow user to select round-robin mode." * Allow round-robin to be selected * Fix descriptions with meta-characters [ An-Cheng Huang ] * initial implementation of image install -- An-Cheng Huang Fri, 17 Jul 2009 15:09:47 -0700 vyatta-cfg-system (0.15.64) unstable; urgency=low * Bugfix 4708: Re-structure to avoid using "update" in non-leaf valueless nodes. -- Bob Gilligan Tue, 14 Jul 2009 17:19:12 -0700 vyatta-cfg-system (0.15.63) unstable; urgency=low * Bugfix 4708: Eliminate use of "update" in non-leaf valueless nodes. -- Bob Gilligan Tue, 14 Jul 2009 12:12:55 -0700 vyatta-cfg-system (0.15.62) unstable; urgency=low [ Mark O'Brien ] * Fix 'sh:1 error' in bug 4655. [ Mohit Mehta ] * Fix Bug 4554 check for existing firewall ruleset fails when applying it to a zone during boot -- Mohit Mehta Thu, 02 Jul 2009 12:23:33 -0700 vyatta-cfg-system (0.15.61) unstable; urgency=low * Fix Bug 4593 zone-policy can't be deleted if zone interfaces are bridges -- Mohit Mehta Tue, 30 Jun 2009 18:28:55 -0700 vyatta-cfg-system (0.15.60) unstable; urgency=low * make changes to work with dhcp 4.1.0 -- Mohit Mehta Mon, 29 Jun 2009 10:05:35 -0700 vyatta-cfg-system (0.15.59) unstable; urgency=low * Update hooks to setup config files for installing to a Xen VM. -- Bob Gilligan Thu, 25 Jun 2009 17:41:38 -0700 vyatta-cfg-system (0.15.58) unstable; urgency=low * Add optional hooks to setup config files for installing to a Xen VM. -- Bob Gilligan Wed, 24 Jun 2009 16:19:12 -0700 vyatta-cfg-system (0.15.57) unstable; urgency=low * temporarily undo check for firewall ruleset until bug 4554 is resolved -- Mohit Mehta Wed, 17 Jun 2009 20:35:37 -0700 vyatta-cfg-system (0.15.56) unstable; urgency=low * Merged from Jenner. -- Bob Gilligan Wed, 17 Jun 2009 16:24:28 -0700 vyatta-cfg-system (0.15.55) unstable; urgency=low * Bugfix 4490: Wait for stability after marking partition bootable. -- Bob Gilligan Wed, 17 Jun 2009 16:22:47 -0700 vyatta-cfg-system (0.15.54) unstable; urgency=low * Bugfix 4490: Mark root partition as "bootable" in the master boot record (MBR). -- Bob Gilligan Wed, 17 Jun 2009 10:49:56 -0700 vyatta-cfg-system (0.15.53) unstable; urgency=low * Fix 4579: There is no validation for vrrp virtual-address like the one for interfaces address. -- Stig Thormodsrud Sun, 14 Jun 2009 14:30:17 -0700 vyatta-cfg-system (0.15.52) unstable; urgency=low * change default-policy to default-action for zones -- Mohit Mehta Wed, 03 Jun 2009 16:42:45 -0700 vyatta-cfg-system (0.15.51) unstable; urgency=low [ Stephen Hemminger ] * Tacplus no longer part of jenner -- An-Cheng Huang Tue, 02 Jun 2009 11:25:45 -0700 vyatta-cfg-system (0.15.50) unstable; urgency=low [ Stephen Hemminger ] * Print error message on failure to create group/user [ Mohit Mehta ] * move server,protocol to the same line in config file [ Stig Thormodsrud ] * Change tunnel multicast from on/off to enable/disable. * Fix bug preventing 'vyatta' user login. [ Stephen Hemminger ] * Fix deletion of pseudo-ethernet * Ignore patch and editor temporary files * Change how system login update works -- An-Cheng Huang Mon, 01 Jun 2009 17:43:59 -0700 vyatta-cfg-system (0.15.48) unstable; urgency=low * Restore default facility for 'syslog console' * Revert "Restore default facility for 'syslog console'" * NTP management version 3 -- Stephen Hemminger Wed, 27 May 2009 10:12:45 -0700 vyatta-cfg-system (0.15.47) unstable; urgency=low [ Jon Andersson ] * Fix 4430: Not possible to create tunnel on fluctating interfaces * Allow multicast to be enabled on tunnel interfaces. [ Stig Thormodsrud ] -- Stig Thormodsrud Mon, 25 May 2009 14:19:19 -0700 vyatta-cfg-system (0.15.46) unstable; urgency=low * Fix install rules * Simplify ntp.conf * Fix post install script to adjust ntp.conf and net.agent -- Stephen Hemminger Sun, 24 May 2009 10:15:03 -0700 vyatta-cfg-system (0.15.45) unstable; urgency=low * Put server at end of file * add iburst * Fix ntp.conf management -- Stephen Hemminger Fri, 22 May 2009 14:38:52 -0700 vyatta-cfg-system (0.15.44) unstable; urgency=low * UNRELEASED -- Stephen Hemminger Fri, 22 May 2009 14:36:24 -0700 vyatta-cfg-system (0.15.43) unstable; urgency=low * Run ntp during boot * Don't run net.agent -- Stephen Hemminger Fri, 22 May 2009 10:22:30 -0700 vyatta-cfg-system (0.15.42) unstable; urgency=low * Change default NTP server * Don't flush out ntp.conf on boot * Revert "Change default NTP server" * Add NTP configuration file -- Stephen Hemminger Fri, 22 May 2009 08:13:33 -0700 vyatta-cfg-system (0.15.41) unstable; urgency=low [ Stephen Hemminger ] * Avoid restarting NTP server if not needed [ Mohit Mehta ] * Fix Bug 4416 Add the ability to configure a specific server for DynDNS -- Mohit Mehta Tue, 19 May 2009 21:24:59 -0700 vyatta-cfg-system (0.15.40) unstable; urgency=low * Don't advertise loopback interface as an allowed value for zone interfaces -- Mohit Mehta Fri, 15 May 2009 12:20:42 -0700 vyatta-cfg-system (0.15.39) unstable; urgency=low * Fix Bug 4395 After local-zone is set, traffic from localhost is dropped -- Mohit Mehta Fri, 15 May 2009 11:02:14 -0700 vyatta-cfg-system (0.15.38) unstable; urgency=low * Allow specifying 'protocols' for syslog facility * Reindent syslog script -- Stephen Hemminger Wed, 06 May 2009 17:21:16 -0700 vyatta-cfg-system (0.15.37) unstable; urgency=low * * do silent validity check when creating zone chains and adding from zone rules -- Mohit Mehta Wed, 06 May 2009 16:52:59 -0700 vyatta-cfg-system (0.15.36) unstable; urgency=low * Split up system login scripts -- Stephen Hemminger Tue, 05 May 2009 13:51:14 -0700 vyatta-cfg-system (0.15.35) unstable; urgency=low * * restrict zone name to 20 characters -- Mohit Mehta Tue, 05 May 2009 11:50:15 -0700 vyatta-cfg-system (0.15.34) unstable; urgency=low * Move virtual-ethernet to pseudo-ethernet -- Stephen Hemminger Wed, 29 Apr 2009 12:32:41 -0700 vyatta-cfg-system (0.15.33) unstable; urgency=low [ Stig Thormodsrud ] * Replace md5 compare with a (hopefully) lighter-weight file compare. [ Stephen Hemminger ] * ntp: fix message -- Stephen Hemminger Tue, 28 Apr 2009 14:09:30 -0700 vyatta-cfg-system (0.15.32) unstable; urgency=low * Using perl module for move() rather than system call. * Avoid unnecessary writing of file if it's the same contents. -- Stig Thormodsrud Mon, 27 Apr 2009 14:42:17 -0700 vyatta-cfg-system (0.15.31) unstable; urgency=low * Add configurable login banners. -- Stig Thormodsrud Sun, 26 Apr 2009 18:53:02 -0700 vyatta-cfg-system (0.15.30) unstable; urgency=low * * add jump to local-zone-out chain in OUTPUT chain for both [ip and ip6] tables -- Mohit Mehta Fri, 24 Apr 2009 18:31:57 -0700 vyatta-cfg-system (0.15.29) unstable; urgency=low * Add support for virtual-ethernet * New tacacs+ configuration templates -- Stephen Hemminger Fri, 24 Apr 2009 13:01:24 -0700 vyatta-cfg-system (0.15.28) unstable; urgency=low [ Justin Fletcher ] * Allow for enterprise MIB [ Mohit Mehta ] * Fix Bug 4207 dns forwarding has hardcoded ethernet assumptions [ Stig Thormodsrud ] -- Stig Thormodsrud Thu, 23 Apr 2009 13:26:49 -0700 vyatta-cfg-system (0.15.27) unstable; urgency=low * Move disable-link-detect out of vyatta-cfg-quagga to interfaces -- Stephen Hemminger Mon, 20 Apr 2009 09:22:39 -0700 vyatta-cfg-system (0.15.26) unstable; urgency=low * add default-policy node for zones. can be set to drop or reject * add default-policy node for zones. can be set to drop or reject -- Mohit Mehta Thu, 16 Apr 2009 17:46:19 -0700 vyatta-cfg-system (0.15.25) unstable; urgency=low * add read-write union install mechanism * handle default xen kernel * post-install changes -- An-Cheng Huang Tue, 14 Apr 2009 16:27:15 -0700 vyatta-cfg-system (0.15.24) unstable; urgency=low * add local-zone in|out firewall and clean-up code -- Mohit Mehta Fri, 10 Apr 2009 18:41:11 -0700 vyatta-cfg-system (0.15.23) unstable; urgency=low * Fix file syslog target -- Stephen Hemminger Fri, 10 Apr 2009 10:13:35 -0700 vyatta-cfg-system (0.15.22) unstable; urgency=low * fix xen kernel handling for union install -- An-Cheng Huang Thu, 09 Apr 2009 13:49:59 -0700 vyatta-cfg-system (0.15.21) unstable; urgency=low * Resolve problems with syslog.conf -- Stephen Hemminger Thu, 09 Apr 2009 13:25:42 -0700 vyatta-cfg-system (0.15.20) unstable; urgency=low * Rewrite syslog management -- Stephen Hemminger Wed, 08 Apr 2009 15:35:47 -0700 vyatta-cfg-system (0.15.19) unstable; urgency=low * change xen kernel detection -- An-Cheng Huang Mon, 06 Apr 2009 11:41:23 -0700 vyatta-cfg-system (0.15.18) unstable; urgency=low * Fix "clear vrrp process". Use new perl lib hierarchy. -- Stig Thormodsrud Sun, 05 Apr 2009 13:14:14 -0700 vyatta-cfg-system (0.15.17) unstable; urgency=low [ Stig Thormodsrud ] * Change "syntax" check to "commit" check for virtual interfaces. * 0.15.16 [ Stephen Hemminger ] * Update template to handle change in default syslog.conf -- Stephen Hemminger Wed, 01 Apr 2009 16:52:02 -0700 vyatta-cfg-system (0.15.16) unstable; urgency=low * Change "syntax" check to "commit" check for virtual interfaces. -- Stig Thormodsrud Wed, 01 Apr 2009 16:27:35 -0700 vyatta-cfg-system (0.15.15) unstable; urgency=low * Don't double log quagga messages * Help text spelling fix * Update help text to show which facility is quagga * Use interface check program -- Stephen Hemminger Wed, 01 Apr 2009 08:46:51 -0700 vyatta-cfg-system (0.15.14) unstable; urgency=low * Turn off forwarding delay if STP is off * Set forwarding-delay when STP is enabled -- Stephen Hemminger Tue, 31 Mar 2009 14:12:24 -0700 vyatta-cfg-system (0.15.13) unstable; urgency=low * UNRELEASED -- Bob Gilligan Thu, 26 Mar 2009 14:53:20 -0700 vyatta-cfg-system (0.15.12) unstable; urgency=low * Bugfix 4139: Increase minimum root filesystem size to 1 GB. -- Bob Gilligan Thu, 26 Mar 2009 14:11:38 -0700 vyatta-cfg-system (0.15.11) unstable; urgency=low * Revert "Split login authentication configuration into three scripts" -- Stephen Hemminger Thu, 26 Mar 2009 10:17:39 -0700 vyatta-cfg-system (0.15.10) unstable; urgency=low * Add "interface ethernet <> bridge-group bridge" update tag in addition to create tag. -- Stig Thormodsrud Wed, 25 Mar 2009 18:22:28 -0700 vyatta-cfg-system (0.15.9) unstable; urgency=low * Change bridge check from "syntax" to "create". -- Stig Thormodsrud Wed, 25 Mar 2009 17:45:33 -0700 vyatta-cfg-system (0.15.8) unstable; urgency=low * move keepalived.pm to vyatta-cfg -- Stephen Hemminger Wed, 25 Mar 2009 16:43:25 -0700 vyatta-cfg-system (0.15.7) unstable; urgency=low [ Stephen Hemminger ] * Fix bare file handle warning * Split login authentication configuration into three scripts [ Stig Thormodsrud ] * Change "syntax" check to "commit" check for "bridge-group bridge". [ Stephen Hemminger ] * Fix update of description -- Stephen Hemminger Wed, 25 Mar 2009 14:19:22 -0700 vyatta-cfg-system (0.15.6) unstable; urgency=low * Change "syntax" check to a "commit" check. -- Stig Thormodsrud Tue, 24 Mar 2009 17:53:17 -0700 vyatta-cfg-system (0.15.5) unstable; urgency=low * Save interface description in kernel -- Stephen Hemminger Mon, 23 Mar 2009 12:27:42 -0700 vyatta-cfg-system (0.15.4) unstable; urgency=low [ Stephen Hemminger ] * Change update to create on multi-nodes [ Mohit Mehta ] * will help debug bug 4181 if and when it happens [ An-Cheng Huang ] * use renamed tacplus package -- An-Cheng Huang Mon, 23 Mar 2009 11:11:38 -0700 vyatta-cfg-system (0.15.3-14) unstable; urgency=low * Fix 4190: vrrp may fail to start daemon if previous commit of vrrp partially failed -- Stig Thormodsrud Thu, 12 Mar 2009 10:58:43 -0700 vyatta-cfg-system (0.15.3-13) unstable; urgency=low [ Mohit Mehta ] * use code from Vyatta::Misc where is_dhcp_enabled() is already defined [ Stephen Hemminger ] * Fix perlcritic warning about bare file handle * Fix delete of bonding vif * Don't allow vif on disabled bonding interface -- Stephen Hemminger Wed, 11 Mar 2009 21:36:16 -0700 vyatta-cfg-system (0.15.3-12) unstable; urgency=low [ Stig Thormodsrud ] * Fix 4183: No auto completion for group number when running 'clear vrrp [ Bob Gilligan ] * Remove per-interface firewall templates. They are generated now. -- Bob Gilligan Mon, 09 Mar 2009 11:16:47 -0700 vyatta-cfg-system (0.15.3-11) unstable; urgency=low [ Stig Thormodsrud ] * Remove prefix mask on vip if present since it can't be using in arping. [ Stephen Hemminger ] * Fix path to lsof -- An-Cheng Huang Sat, 07 Mar 2009 23:25:55 -0800 vyatta-cfg-system (0.15.3-10) unstable; urgency=low [ Stephen Hemminger ] * Fix perlcritic warnings * Change sudo ability of some operator related commands * More checking for open() of log [ Stig Thormodsrud ] * Move changes file to /var/run/vrrpd and make sure the directory exists. * Remove unused directory. * Specify source address with arping since we no longer require an IP -- Stig Thormodsrud Fri, 06 Mar 2009 18:59:46 -0800 vyatta-cfg-system (0.15.3-9) unstable; urgency=low * Fix path on hwclock cleanout * Run through tidy for indent * Use vyatta-interfaces.pl to show available bonding devices * Use vyatta-interfaces.pl to check bridge validity * Fix slave device startup -- Stephen Hemminger Tue, 03 Mar 2009 10:56:22 -0800 vyatta-cfg-system (0.15.3-8) unstable; urgency=low * Convert to bonding vif to use netlink. * Change install-system to handle CF better * Remove out of date quick-install -- Stephen Hemminger Mon, 02 Mar 2009 16:11:10 -0800 vyatta-cfg-system (0.15.3-7) unstable; urgency=low [ Mohit Mehta ] * let admin user set arp paramters [ Stig Thormodsrud ] * Fix 3778: vrrp should allow prefix to be included with the virtual- address * Fix breakage from previous cleanup commit. * Fix 4068: 'show vrrp' last transition times are not updated when a transition occurs on boot. * Fix 4152: Add support for VRRP operation on unnumbered interfaces -- Stig Thormodsrud Sun, 01 Mar 2009 12:15:45 -0800 vyatta-cfg-system (0.15.3-6) unstable; urgency=low [ An-Cheng Huang ] * fix logic and shell syntax * up the bridge interface when it's created [ Mohit Mehta ] * Fix Bug 2463 Allow the neighbor table threshold values to be -- Mohit Mehta Fri, 27 Feb 2009 19:08:52 -0800 vyatta-cfg-system (0.15.3-5) unstable; urgency=low * set default values for ipv6 accept_redirects and accept_source_route -- Mohit Mehta Tue, 24 Feb 2009 18:56:48 -0800 vyatta-cfg-system (0.15.3-4) unstable; urgency=low * Allow installation on virtio disk * Don't depend on /proc/ide -- Stephen Hemminger Tue, 24 Feb 2009 15:41:57 -0800 vyatta-cfg-system (0.15.3-3) unstable; urgency=low [ Stephen Hemminger ] * Take out ipt_rlsnmpstats module [ Mohit Mehta ] * Fix Bug 3951 default values for kernel tunable security parameters under firewall -- Mohit Mehta Thu, 19 Feb 2009 19:12:45 -0800 vyatta-cfg-system (0.15.3-2) unstable; urgency=low * fix spelling mistake -- Mohit Mehta Tue, 10 Feb 2009 10:10:03 -0800 vyatta-cfg-system (0.15.3-1) unstable; urgency=low [ Stephen Hemminger ] * bridge: handle non ethernet devices in bridge [ Mohit Mehta ] * permit operator-level user to issue show and clear commands for firewall -- Mohit Mehta Fri, 06 Feb 2009 17:45:06 -0800 vyatta-cfg-system (0.15.3) unstable; urgency=low * Fix delete of bonding interface * Replace bare word file handle -- Stephen Hemminger Mon, 26 Jan 2009 16:25:33 -0800 vyatta-cfg-system (0.15.2) unstable; urgency=low * disable bridge node should be same as disable ethernet * Bridge/bonding update to new syntax -- Stephen Hemminger Mon, 12 Jan 2009 16:51:36 -0800 vyatta-cfg-system (0.15.1) unstable; urgency=low [ Rick Balocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3731 [ Stephen Hemminger ] * Fix password changer to deal with update config format * Make standalone passwd reset change vyatta not root * Leave root account disabled * Standalone tool now changes vyatta not root password [ Rick Balocca ] * Fix typo [ rbalocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2426 [ Stephen Hemminger ] * Mount root filesystem with noatime * Add completion for allowed values * Don't force rebuild of ssh_host_key on each boot * Remove OFR from grub lines * fix grammar of previous patch * Don't restart sshd if not needed * Always restart ssh [ Robert Bays ] * add basic tacacs+ support [ Stephen Hemminger ] * Avoid sleep in ntp restart * Speed up boot * Remove extra call to set hwclock on startup * typo in last commit * Speed up addition of users to system [ Mohit Mehta ] * dhcp action scripts for linkup/down [ Stephen Hemminger ] * Fix sysctl key values [ An-Cheng Huang ] * add support for development build [ Mohit Mehta ] * Fix Bug 3917 dhcp brings interface up for lease acquire/renew even though interface has been disabled in CLI [ Stephen Hemminger ] * Rename VyattaKeepalived to Vyatta::Keepalived * Convert to Vyatta::Config hierarchy [ Bob Gilligan ] * Bugfix 3747: Allow user to break previously existing RAID group. [ Stephen Hemminger ] * VyattaConfig -> Vyatta::Config * Add correct help for bonding modes [ Rick Balocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3963 [ Stephen Hemminger ] * use vyatta-link-detect * Remove OFR from grub lines * fix grammar of previous patch * need full path to linkdetect [ An-Cheng Huang ] * update maintainer information * "files" file should be removed before package build [ Stephen Hemminger ] * Add acpid [ slioch ] * removed unprintable form-feed characters. This was causing xml validation to fail within the webgui. [ Mohit Mehta ] * Fix Bug 4022 dynamic dns config fails during system boot if interface does not exist [ An-Cheng Huang ] -- An-Cheng Huang Thu, 08 Jan 2009 09:25:28 -0800 vyatta-cfg-system (0.15) unstable; urgency=low 3.2.0 [ Mark O'Brien ] [ Bob Gilligan ] * Bugfix 3738: Improve safety in installing onto RAID sets. * Bugfix 3932 [ Stig Thormodsrud ] * Fix 3929: Operator level user now need sudo password to run "clear arp [ Bob Gilligan ] * Bugfix 3928: Need to install vyatta-raid-event script. [ Stig Thormodsrud ] * Fix 3920: Operator level users require sudo permission for nat * Fix 3918: Operator level users require sudo permission for ipv6 clear [ Stephen Hemminger ] * Make sure install-system only run with root privledges [ Mohit Mehta ] * make 'show interfaces wirelessmodem stats' work from operator mode [ Stephen Hemminger ] * Handle older format config files in password reset [ An-Cheng Huang ] * fix for bug 2313: add support for "Region/City" timezone specification. [ Mohit Mehta ] * rmeove ddclient script from ppp ip-up directory as we configure [ Stig Thormodsrud ] * Add config to disable ip/ipv6 forwarding. [ Mohit Mehta ] * change input parameter name from dhclient_script to outside_cli to [ Robert Bays ] * bug 3791: set sysObjectID and sysDescr * bug 1587: add error message when user tries native install from non- union media [ Bob Gilligan ] * Bugfix: 3841 [ Stephen Hemminger ] * Fix standalone password reset * Allow more ethtool commands * Make stanalone passwd reset work [ Mohit Mehta ] * Fix Bug 3840 System error reported on initial SNMP commit with trap target [ Stephen Hemminger ] * Handle config file format change in standalone reset * Fix password changer to deal with update config format [ An-Cheng Huang ] * add firewall configuration to bridge interface [ Stephen Hemminger ] * Fix bad tab completion on interfaces/bonding [ Mohit Mehta ] * Fix Bug 3567 Debug messages are not logged by default on upgraded system [ Bob Gilligan ] * Bugfix: 3687: Only start mdadm if we have a RAID group as root filesystem. * Bugfix: 3775: Allow RAID-1 to be configured on disks with different sizes [ Stig Thormodsrud ] * Change telnet allow-root type from txt to bool. [ Stephen Hemminger ] * Need sudo when editing ssh config file * Fix parsing of allow-root field * Revert "Block remote access to rpc-bind port" * Block remote access to rpc-bind port [ Bob Gilligan ] * Bugfix: 3744 [ An-Cheng Huang ] * remove unused files * use epoch in package version number * add ssh key blacklists [ Stephen Hemminger ] * Allow non-livecd union install * install-system can only run from livecd [ Bob Gilligan ] * Bugfix: 3226 [ Robert Bays ] * fix ssh keygen on startup [ Mohit Mehta ] * - redo internal snmpv3 user creation for linkUpDownNotifications * Fix Bug 3751 configuring multiple global syslog facilities overwrites previous ones in /etc/syslog.conf [ Stephen Hemminger ] * Go back to simpler syslog config * Don't allow operator to reboot system [ Bob Gilligan ] * Bugfix: 3226 [ Stephen Hemminger ] * Revert "Set correct mode on configuration mode" * Set correct mode on configuration mode [ An-Cheng Huang ] * fix xen grub setup [ slioch ] * Revert "Change allow-root nodes to boolean" [ Stephen Hemminger ] * Change allow-root nodes to boolean [ Mohit Mehta ] * don't poll resolv files for nameserver changes - it messes up statistics [ rbalocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3735 [ Bob Gilligan ] * Bugfix: 3743 [ Mohit Mehta ] * Fix Bug 3609 - "show tech-support" does not display open file information for operator level user [ Bob Gilligan ] * Bugfix: 3727 * Bugfix: 3572 [ Stephen Hemminger ] * Standalone passwd reset prompt for password * Workaround problems with mkpasswd [ rbalocca ] * Add vyatta-grub-setup * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3712 [ Bob Gilligan ] * Bugfix: 3492 * Bugfix: 3515 * Bugfix: 3703 [ Stephen Hemminger ] * No longer need to turn off SACK * Allow any number of bridge devices * Allow any number of tunnel devices [ Rick Balocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3694 [ Mohit Mehta ] * Fix Bug 3607 Error setting DNS forwarding to use DHCP [ Stephen Hemminger ] * Don't need to list ifenslave twice * Add support for bonding [ Robert Bays ] * expose the union option in install-system * fix bug 3863 * Don't kill An-Cheng's commits. * change to native install from a USB stick * remove complex options from union install * changed union install to support multiple directories [ An-Cheng Huang ] * add postinst hook for install-system [ Mohit Mehta ] * use script for setting/deleting system nameservers * preserve system name-servers order in /etc/resolv.conf as configured in CLI * - change forced update wait time from 2 weeks to 4 weeks if no change in IP as per the free service provided by dyndns * - remove ddclient cache before restarting [ Robert Bays ] * fixes to install-system and grub-setup for xen hypervisor and device.map [ Mohit Mehta ] * - use apt per interface ddclient files [ Bob Gilligan ] * Account for size of diag partition when calculating disk size, which is needed [ Mohit Mehta ] * first attempt at implementing CLI support for Dynamic DNS * better worded warning when no name-servers set under 'system name- server' * released interface should be flagged as a warning rather than a commit failed [ Robert Bays ] * add functioanlity for binary images to install system [ Mohit Mehta ] * prompt warning for no nameservers if no nameservers set and no interface set to use dhcp [ Stephen Hemminger ] * Add support for aufs [ Mohit Mehta ] * polish up DNS forwarding error messages * show bridge interfaces in allowed values as well if configured to use dhcp * move from a 'ignore-interface' model to a 'listen-on' model for DNS forwarding * - get ddclient package for Dynamic DNS [ An-Cheng Huang ] * remove 2nd timeout to avoid 64-bit boot problem [ Bob Gilligan ] * Update install-system and grub-setup to handle RAID-1 configuration. [ Rick Balocca ] * Merge from "hollywood" [ rbalocca ] * Merge from "hollywood" [ Bob Gilligan ] * Add mdadm package to support RAID-1 configurations. [ Mohit Mehta ] * - servers being used for dns forwarding written to dnsmasq.conf with more info in comments * log dnsmasq output to /var/log/dnsmasq.log on start-up and whilst running (i.e. when sent a signal to log) * tighten the checks for checking the existence or removal or nameservers * tighten regex pattern to get dhclient resolv files [ Stig Thormodsrud ] * Change udevtrigger to udevadm trigger. [ Mohit Mehta ] * remove earlier added dnsmasq options * update dns forwarding nameservers on dhcp lease updates * any change in system name-servers should be communicated to dnsmasq * configure dnsmasq to use dns-servers as specified in CLI * use config rather than /etc/resolv.conf to get system set nameservers * code to specify DNS forwarding nameservers (system, dhcp, explicitly specified) using CLI * tighten syntax check * change 'service dns forward' to 'service dns forwarding' * this better detects the interfaces in /proc/net/dev [ Rick Balocca ] * Script cleanup [ Mohit Mehta ] * change DNS forwarding CLI from 'service dns-forwarding' to 'service dns forward' * add missing comma [ Mark O'Brien ] * control: added ifenslave-2.6 to debian control file [ rbalocca ] * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3542 [ Mohit Mehta ] * add command for user to enter interfaces on which not to listen for DNS queries * - add ability to set cache-size for DNS forwarding from CLI [ Rick Balocca ] * Cleanup * Additional fixes for http://bugzilla.vyatta.com/show_bug.cgi?id=3520 [ rbalocca ] * Fixes for: http://bugzilla.vyatta.com/show_bug.cgi?id=3520 http://bugzilla.vyatta.com/show_bug.cgi?id=3519 http://bugzilla.vyatta.com/show_bug.cgi?d for: http://bugzilla.vyatta.com/show_bug.cgi?id=3520 http://bugzilla.vyatta.com/show_bug.cgi?id=3519 http://bugzilla.vyatta.com/show_bug.cgi?id=3518 and perhaps others [ Mohit Mehta ] * First parts of DNS forwarding stuff [ Stig Thormodsrud ] * Add IPv6 address to comp_help for bridge/tunnel * Enable IPv6 forwarding. [ Stephen Hemminger ] * Get rid of debian build warning [ Rick Balocca ] * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3225 * Partial fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3225 [ Bob Gilligan ] * Bugfix: 3519 [ rbalocca ] * Since this packages changes the bash-completion conf file, it must be installed after bash-completion [ Mohit Mehta ] * add dnsmasq package to be included in the build [ rbalocca ] * The postinst was printing a '?' [ An-Cheng Huang ] * fix for bug 3459: make bash-completion use "builtin set". [ Mark O'Brien ] -- Mark O'Brien Tue, 25 Nov 2008 19:09:21 -0800 vyatta-cfg-system (0.14) unstable; urgency=low 3.1.4 [ Mark O'Brien ] [ Robert Bays ] * fix ssh keygen on startup [ An-Cheng Huang ] * remove unused files * use epoch in package version number * add ssh key blacklists [ Mark O'Brien ] -- Mark O'Brien Tue, 14 Oct 2008 17:30:18 -0700 vyatta-cfg-system (0.13) unstable; urgency=low 3.1.3 [ Mark O'Brien ] [ Bob Gilligan ] * Bugfix: 1292 * Bugfix: 1292 [ rbalocca ] * More spaces (bugs http://bugzilla.vyatta.com/show_bug.cgi?id=3549 and http://bugzilla.vyatta.com/show_bug.cgi?id=3552) * Fixes for bugs: http://bugzilla.vyatta.com/show_bug.cgi?id=3549 and http://bugzilla.vyatta.com/show_bug.cgi?id=3552 [ Rick Balocca ] * Merge from islavista * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3520 [ Mark O'Brien ] -- Mark O'Brien Tue, 19 Aug 2008 17:48:26 -0700 vyatta-cfg-system (0.12) unstable; urgency=low 3.1.2 [ Mark O'Brien ] [ Mohit Mehta ] * => Modified vyatta_update_resolv.pl to update (i.e. add and remove) 'name-server' and 'domain-name-server' options [ root ] * Fix 3359: changing telnet setting drops other telnet sessions. [ Stig Thormodsrud ] * Fix 3460: vrrp authentication error msg is wrong [ Stephen Hemminger ] * purge any old entries from sudoers * Don't add ide=nodma twice [ rbalocca ] * Remove debugging * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2807 [ Robert Bays ] * fix for bug 3095 [ Stephen Hemminger ] * Modify upgrade procedure for /etc/sudoers [ An-Cheng Huang ] * fix for bug 3417: use UUID in grub config file [ Stephen Hemminger ] * Fix problem if install-system run twice [ Bob Gilligan ] * Bugfix: 1592 [ Stephen Hemminger ] * Missing -e causes sudoers problem * Can't use logger in standalone * get rid of extra fi from last commit * Change syslogging of authorization related commands * Use logger to write system log * Make standalone password reset work * Handle multiple slashes in passwd [ Mark O'Brien ] -- Mark O'Brien Wed, 23 Jul 2008 21:35:54 -0700 vyatta-cfg-system (0.11) unstable; urgency=low 3.1.1 [ Mark O'Brien ] [ Stig Thormodsrud ] * Fix 3379: tunnel interfaces are artificially limited to tun0-tun9 * Add cli to enable proxy arp on a interface. [ Bob Gilligan ] * Bugfix: 1292 [ Stephen Hemminger ] * translate slash in password * Spellin fixes [ Auto Build ] * Remove dependency on grub-pc [ rbalocca ] * Insist on vyatta-keepalived * Additional dependencies [ Bob Gilligan ] * Bugfix: 3259 [ Stig Thormodsrud ] * Add module version for vrrp. * Fix 2030: Enhancement: VRRP preemption hold down timer [ Stephen Hemminger ] * Prompt for vyatta and root password * Use tr command rather than awk * Use UUID to find root filesystem * Surpress messages by default * Add passwd sync script [ Mark O'Brien ] -- Mark O'Brien Sat, 28 Jun 2008 11:22:12 -0700 vyatta-cfg-system (0.10) unstable; urgency=low 3.1.0 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3032: rename pre-glendale config files during install- system. [ Robert Bays ] * fix bug 3039 [ Stephen Hemminger ] * Turn off framebuffer (by default) [ Stig Thormodsrud ] * Fix 1818: Add disable option to vrrp. [ Stephen Hemminger ] * Enable vga framebuffer on console * Allow operator to run wanpipemon [ Bob Gilligan ] * Bugfix: 3305 [ Stig Thormodsrud ] * Fix 3328: operator can't issue "show vrrp". [ Stephen Hemminger ] * wrong option to useradd * Put vyatta users in the users group [ Stig Thormodsrud ] * Fix 787: Add a command to force vrrp state transition to backup [ Stephen Hemminger ] * Switch back to snmpd * Remove shell template (not ready yet). [ Robert Bays ] * fix for bugs 3294 and 3296 [ Stephen Hemminger ] * Turn off TCP SACK * Pull in vyatta version of snmpd [ Mohit Mehta ] * Fix Bug 3094 SMUX port is open to outside connections [ Stephen Hemminger ] * Allow any user to be in config file * Rework how user accounts are managed * re-indent login script * Add GPL license [ Tom Grennan ] * add libnetaddr-ip-perl dependency [ Stig Thormodsrud ] * Fix 2705: Add "clear vrrp process" command. * Fix vrrp snoop_for_master() to also work with AH authentication. * Make vrrp pcap filter more specific. * Fix 3273: "show vrrp summary" output doesn't line-up when using vlans * Fix 3155: setting the third vrrp member with the highest priority doesn't change (update) the backup [ rbalocca ] * Add vyatta-busybox to dependencies * Ignore derived files [ rbays ] * update install-system to work with xen setup [ Stig Thormodsrud ] * Fix 3251: vrrp should also send a gratuitous arp reply on master transition * Fix 3144: VRRP backup obtains VIP resulting in a duplicate IP situation. * Change dependancy from keepalived to vyatta-keepalived. [ rbays ] * fix install system to use the correct kernels in grub.cfg [ An-Cheng Huang ] * fix typo in rl-system.init [ Stephen Hemminger ] * Move sysctl configuration to /etc/vyatta-sysctl.conf [ Stig Thormodsrud ] * Set initial vrrp state based on existing state if available. [ rbalocca ] * Convert to our method of changelog creation [ Mohit Mehta ] * Modifications to send link up/down traps to configured trap-target * Modifications for enabling net-snmp's interaction with quagga for bgp, ospf and rip mib traversals [ Stephen Hemminger ] * watchlink is no longer used [ rbalocca ] * Pretty print the grub.cfg file * Partitions in grub-pc now start at 1 (instead of 0) * Update install-system to use grub-pc * Revert "remove deprecated install scripts" * config.boot.default is not moved to the top level repo (build- iso.git) [ Mohit Mehta ] * Fix Bug 3172 set interfaces tunnel <> key <> allowed after tunnel creation [ Stig Thormodsrud ] * Fix 3148: can't delete bridge interface [ Mohit Mehta ] * Fix Bug 3164 set interfaces tunnel tun0 remote-ip <> doesn't take effect after committing [ rbalocca ] * Merge from glendale [ Mohit Mehta ] * Bug 3069 Help strings should be standardized * Bug 3069 Help strings should be standardized * Fix Bug 3069 Help strings should be standardized * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI [ An-Cheng Huang ] * fix dependencies [ Stephen Hemminger ] * Allow operator to run ntpdate [ Mohit Mehta ] * Fix Bug 2778 VRRP: add ability to run scripts on state transition [ Tom Grennan ] * consolidate proc/sys flag settings to livecd/install hook * remove deprecated install scripts [ Mohit Mehta ] * Fix Bug 802 VRRP - add "show vrrp summary" command (TC 3.2.5.7.2) [ Stig Thormodsrud ] * Add tshark dependency on vyatta-cfg-system. [ Stephen Hemminger ] * Fix format of date from rl-system.init [ Mark O'Brien ] -- Mark O'Brien Tue, 17 Jun 2008 09:26:27 -0700 vyatta-cfg-system (0.9) unstable; urgency=low 3.0.5 -- Mark O'Brien Tue, 06 May 2008 12:43:15 -0700 vyatta-cfg-system (0.8) unstable; urgency=low 3.0.4 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3225: only insert sudoers if not present. [ Stig Thormodsrud ] * Mimic the transaction mechanism to only restart the vrrp daemon once/commit. [ rbalocca ] * config.boot.default is not moved to the top level repo (build- iso.git) [ Mark O'Brien ] -- Mark O'Brien Mon, 05 May 2008 16:40:35 -0700 vyatta-cfg-system (0.7) unstable; urgency=low 3.0.3 [ Mark O'Brien ] [ Stephen Hemminger ] * watchlink is no longer used [ rbalocca ] * Indicate the VC4.0.2 release candidate in the changelog [ Mark O'Brien ] -- Mark O'Brien Tue, 29 Apr 2008 16:42:17 -0700 vyatta-cfg-system (0.6) unstable; urgency=low VC4.0.2 -- Mark O'Brien Sat, 19 Apr 2008 11:56:03 -0700 vyatta-cfg-system (0.5) unstable; urgency=low VC4.0.2 release candidate [ Mark O'Brien ] [ Stig Thormodsrud ] * Fix 3148: can't delete bridge interface [ rbalocca ] * Remove vestigal version file from vyatta-cfg-system [ Mark O'Brien ] -- Mark O'Brien Wed, 16 Apr 2008 09:50:05 -0700 vyatta-cfg-system (0.4) unstable; urgency=low 3.0.2 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3032: rename pre-glendale config files during install- system. * fix for bug 3087: add proper dependency to ensure install order. [ Bob Gilligan ] * Bugfix: 3021 [ Mark O'Brien ] * Update version file to 3.0.1 * 3.0.1 [ Michael Larson ] * up proc limit for rmem_max to support zebra netlink buffer size increase. [ Mohit Mehta ] * Fix Bug 3027 Unable to configure SNMP community client address [ Robert Bays ] * fix bug 3039 [ Stephen Hemminger ] * Allow operator to run ntpdate [ Stig Thormodsrud ] * Add vrrp vip addresses to watchlink exclude file. * Fix 3086: VRRP only allows up to 20 virtual IPs [ rbalocca ] * Fix debian dependencies * Line up the colons with the one from the copyright notice (in show version) * Set dependencies on either bash or vyatta-bash * Move the copyright dates over (bug 3028) [ Mark O'Brien ] -- Mark O'Brien Fri, 04 Apr 2008 18:00:34 -0700 vyatta-cfg-system (0.3) unstable; urgency=low VC4.0.1 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 2083: add radius authentication support. [ Mark O'Brien ] * Update version file to VC4.0.1 [ Mohit Mehta ] * Fix Bug 2707 Missing from Glendale * CLI tab enhancement at "set interfaces ethernet <> address" [ Robert Bays ] * fixes for bugs 2499, 2967 [ Stephen Hemminger ] * add operator and admin to linux group adm * add option to disable root login over ssh * fix ssh allow-root template * put operator in operator group * add explicit list of commands in sudoers * don't allow illegal hostnames * allow numbers in hostname * allow non-root to clear nat counters * Replace VPL with GPLv2 * Changes for license/copyright * Update to GPLv2 * Move init-floppy to /opt/vyatta/sbin * Allow operator to set date. [ Stig Thormodsrud ] * Fix 2877: Bridge group can not be assiged to vif sub interfaceZ * Fix parse error in /etc/sudoers * Fix 2880 SNMP configuration file issues * Fix 2695 GRE tunnel doesn't work with "key" [ rbalocca ] * Fix for bug #2934 * Fix for bug #2542 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2542 ) * Fix for bug #2921 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2921 ) * Revert "Fix for bug #2921 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2921 )" * Improve the package repository template * Fix for bug #2969 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2969 ) * Update copyright for "show version" [ Mark O'Brien ] -- Mark O'Brien Tue, 18 Mar 2008 19:03:58 -0700 vyatta-cfg-system (0.2) unstable; urgency=low vc4.0.0 [ Mark O'Brien ] [ An-Cheng Huang ] * clean up temp file in delete fail case * convert templates to new syntax * add commit check for user password * revise the password check * fix for bug 2768: add "dynamic" keyword to server entry. * template cleanup and fix for bug 2785: update /etc/mailname with hostname. * prevent ':' in full name (separator in passwd) * allow empty full-name * fix for bug 2547: don't require/output ':' after "hw-id". * fix for bug 2855: change help text * debian's latest update to "bash" (3.1dfsg-9) broke the completion mechanism. * fix for bug 2764: rename user level * use vyattacfg for config files [ Mark O'Brien ] * Updated syslog help with severity information. * Update version file to vc4.0.0 [ Michael Larson ] * bump up rmem_max limit to 223232 (in conjunction with fix for zebra) [ Stig Thormodsrud ] * update tunnel help strings with defaults * add a few missing help strings * - Fix 2745: bridge-group cost - syntax error * Fix 2819 Plain-text authentication should be identified as such. * Fix syntax error in "interface bridge <> priority". [ Tom Grennan ] * source /etc/default/vyatta instead of configuring install-system * remove stale CONFIG_PARTITION comments [ rbalocca ] * Add version file * Update version file to 4.0.0 * 4.0.0 * vyatta-cfg-system postinst was clobbering version file * These files will be changed by autobuild-git-eureak * Missing version file in Makefile.am [ Mark O'Brien ] -- Mark O'Brien Mon, 25 Feb 2008 17:38:40 -0800 vyatta-cfg-system (0.1) unstable; urgency=low * Initial Release. -- An-Cheng Huang Thu, 18 Oct 2007 11:03:18 -0700