#!/usr/bin/perl
#
# Module: vyatta-interfaces.pl
# 
# **** License ****
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
# 
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# A copy of the GNU General Public License is available as
# `/usr/share/common-licenses/GPL' in the Debian GNU/Linux distribution
# or on the World Wide Web at `http://www.gnu.org/copyleft/gpl.html'.
# You can also obtain it by writing to the Free Software Foundation,
# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
# MA 02110-1301, USA.
# 
# This code was originally developed by Vyatta, Inc.
# Portions created by Vyatta are Copyright (C) 2007 Vyatta, Inc.
# All Rights Reserved.
# 
# Author: Stig Thormodsrud
# Date: November 2007
# Description: Script to assign addresses to interfaces.
# 
# **** End License ****
#

use lib "/opt/vyatta/share/perl5/";
use Vyatta::Config;
use Vyatta::Misc qw(generate_dhclient_intf_files
		    getInterfaces getIP get_sysfs_value
 		    is_address_enabled is_dhcp_enabled is_ip_v4_or_v6);
use Vyatta::File qw(touch);
use Vyatta::Interface;

use Getopt::Long;

use strict;
use warnings;

my $dhcp_daemon = '/sbin/dhclient';
my $ETHTOOL     = '/sbin/ethtool';

my ($dev, $mac, $mac_update);
my %skip_interface;
my ($check_name, $show_names, $vif_name, $warn_name);
my ($check_up, $dhcp_command, $allowed_speed);
my (@speed_duplex, @addr_commit, @check_speed);

sub usage {
    print <<EOF;
Usage: $0 --dev=<interface> --check=<type>
       $0 --dev=<interface> --warn
       $0 --dev=<interface> --valid-mac=<aa:aa:aa:aa:aa:aa>
       $0 --dev=<interface> --valid-addr-commit={addr1 addr2 ...}
       $0 --dev=<interface> --speed-duplex=speed,duplex
       $0 --dev=<interface> --check-speed=speed,duplex
       $0 --dev=<interface> --allowed-speed
       $0 --dev=<interface> --isup
       $0 --show=<type>
EOF
    exit 1;
}

GetOptions("valid-addr-commit=s{,}" => \@addr_commit,
           "dev=s"             => \$dev,
	   "valid-mac=s"       => \$mac,
	   "set-mac=s"	       => \$mac_update,
	   "dhcp=s"	       => \$dhcp_command,
	   "check=s"	       => \$check_name,
	   "show=s"	       => \$show_names,
	   "skip=s"	       => sub { $skip_interface{$_[1]} = 1 },
	   "vif=s"	       => \$vif_name,
	   "warn"	       => \$warn_name,
	   "isup"	       => \$check_up,
	   "speed-duplex=s{2}" => \@speed_duplex,
	   "check-speed=s{2}"  => \@check_speed,
	   "allowed-speed"     => \$allowed_speed,
) or usage();

is_valid_addr_commit($dev, @addr_commit) if (@addr_commit);
is_valid_mac($mac, $dev)		if ($mac);
update_mac($mac_update, $dev)		if ($mac_update);
dhcp($dhcp_command, $dev)	if ($dhcp_command);
is_valid_name($check_name, $dev)	if ($check_name);
exists_name($dev)			if ($warn_name);
show_interfaces($show_names)		if ($show_names);
is_up($dev)			        if ($check_up);
set_speed_duplex($dev, @speed_duplex)   if (@speed_duplex);
check_speed_duplex($dev, @check_speed)  if (@check_speed);
allowed_speed($dev)			if ($allowed_speed);
exit 0;

sub is_ip_configured {
    my ($intf, $ip) = @_;
    my $found = grep { $_ eq $ip } Vyatta::Misc::getIP($intf);
    return ($found > 0);
}

sub is_ipv4 {
    return index($_[0],':') < 0;
}

sub is_up {
    my $name = shift;
    my $intf = new Vyatta::Interface($name);
    
    die "Unknown interface type for $name" unless $intf;
    
    exit 0 if ($intf->up());
    exit 1;
}

sub dhcp_write_file {
    my ($file, $data) = @_;

    open(my $fh, '>', $file) || die "Couldn't open $file - $!";
    print $fh $data;
    close $fh;
}

sub dhcp_conf_header {
    my $output;

    my $date = `date`;
    chomp $date;
    $output  = "#\n# autogenerated by vyatta-interfaces.pl on $date\n#\n";
    return $output;
}

sub get_hostname {
    my $config = new Vyatta::Config;
    $config->setLevel("system");
    return $config->returnValue("host-name");
}

sub is_domain_name_set {
    my $config = new Vyatta::Config;
    $config->setLevel("system");
    return $config->returnValue("domain-name");
}

sub get_mtu {
    my $name = shift;
    my $intf = new Vyatta::Interface($name);
    return $intf->mtu();
}

sub dhcp_update_config {
    my ($conf_file, $intf) = @_;
    
    my $output = dhcp_conf_header();
    my $hostname = get_hostname();

    $output .= "interface \"$intf\" {\n";
    if (defined($hostname)) {
       $output .= "\tsend host-name \"$hostname\";\n";
    }
    $output .= "\trequest subnet-mask, broadcast-address, routers, domain-name-servers";
    my $domainname = is_domain_name_set();
    if (!defined($domainname)) {
       $output .= ", domain-name";
    } 

    my $mtu = get_mtu($intf);
    $output .= ", interface-mtu" unless $mtu;

    $output .= ";\n";
    $output .= "}\n\n";

    dhcp_write_file($conf_file, $output);
}

# Is interface disabled in configuration (only valid in config mode)
sub is_intf_disabled {
    my $name = shift;
    my $intf = new Vyatta::Interface($name);
    $intf or die "Unknown interface name/type: $name\n";

    my $config = new Vyatta::Config;
    $config->setLevel($intf->path());

    return $config->exists("disable");
}

sub run_dhclient {
    my ($intf, $op_mode) = @_;

    my ($intf_config_file, $intf_process_id_file, $intf_leases_file)
        = generate_dhclient_intf_files($intf);

    # perform config mode actions if not called from op-mode
    if (!defined $op_mode) {
      dhcp_update_config($intf_config_file, $intf);
      return if is_intf_disabled($intf);
    }

    my $cmd = "$dhcp_daemon -pf $intf_process_id_file -x $intf 2> /dev/null; rm -f $intf_process_id_file 2> /dev/null;";
    $cmd .= "$dhcp_daemon -q -nw -cf $intf_config_file -pf $intf_process_id_file  -lf $intf_leases_file $intf 2> /dev/null &";
    # adding & at the end to make the process into a daemon immediately
    system ($cmd) == 0
	or warn "start $dhcp_daemon failed: $?\n";
}

sub stop_dhclient {
    my ($intf, $op_mode) = @_;

    # perform config mode actions if not called from op-mode
    if (!defined $op_mode) {
      return if is_intf_disabled($intf);
    }

    my ($intf_config_file, $intf_process_id_file, $intf_leases_file)
	= generate_dhclient_intf_files($intf);
    my $release_cmd = "$dhcp_daemon -q -cf $intf_config_file -pf $intf_process_id_file -lf $intf_leases_file -r $intf 2> /dev/null;";
    $release_cmd .= "rm -f $intf_process_id_file 2> /dev/null";
    system ($release_cmd) == 0
	or warn "stop $dhcp_daemon failed: $?\n";
}

sub update_mac {
    my ($mac, $name) = @_;
    my $intf = new Vyatta::Interface($name);
    $intf or die "Unknown interface name/type: $name\n";

    # maybe nothing needs to change
    my $oldmac = $intf->hw_address();
    exit 0 if (lc($oldmac) eq lc($mac));

    # try the direct approach
    if (system("ip link set $name address $mac") == 0) {
	exit 0;
    } elsif ($intf->up()) {
	# some hardware can not change MAC address if up
	system "ip link set $name down"
	    and die "Could not set $name down\n";
	system "ip link set $name address $mac"
	    and die "Could not set $name address\n";
	system "ip link set $name up"
	    and die "Could not set $name up\n";
    } else {
	die "Could not set mac address for $name\n";
    }

    exit 0;
}
 
sub is_valid_mac {
    my ($mac, $intf) = @_;
    my @octets = split /:/, $mac;
    
    ($#octets == 5) or die "Error: wrong number of octets: $#octets\n";

    ((hex($octets[0]) & 1) == 0) or die "Error: $mac is a multicast address\n";

    my $sum = 0;
    $sum += hex( $_) foreach @octets;
    ( $sum != 0 ) or die "Error: zero is not a valid address\n";

    exit 0;
}

# Validate the set of address values configured on an interface at commit
# Check that full set of address address values are consistent. 
#  1. Interface may not be part of bridge or bonding group
#  2. Can not have both DHCP and a static IPv4 address.
sub is_valid_addr_commit {
    my ($ifname, @addrs) = @_;
    my $intf = new Vyatta::Interface($ifname);
    $intf or die "Unknown interface name/type: $ifname\n";

    my $config = new Vyatta::Config;
    $config->setLevel($intf->path());

    my $bridge = $config->returnValue("bridge-group bridge");
    die "Can't configure address on interface that is port of bridge.\n"
	if (defined($bridge));

    my $bond = $config->returnValue("bond-group");
    die "Can't configure address on interface that is slaved to bonding interface.\n"
	if (defined($bond));

    # Map of all the ip addresses
    my %ipaddr_hash = map { $_ => 1 } getIP();

    my ($dhcp, $static_v4);
    foreach my $addr (@addrs) {
	next if ($addr eq 'dhcpv6');
	if ($addr eq 'dhcp') {
	    $dhcp = 1;
  } elsif (!Vyatta::Interface::is_uniq_address($addr)) {
    my $h = Vyatta::Misc::get_ipnet_intf_hash();
            print "Error: duplicate address $addr on $h->{$addr}\n";
            exit 1;
	} elsif ( is_ipv4($addr) ) {
	    $static_v4 = 1;
        }
    }

    die "Can't configure static IPv4 address and DHCP on the same interface.\n"
	    if ($static_v4 && $dhcp);

    exit 0;
}

# Is interface currently in admin down state?
sub is_intf_down {
    my $name = shift;
    my $intf = new Vyatta::Interface($name);

    return 1 unless $intf;
    return ! $intf->up();
}

sub dhcp {
    my ($request, $intf) = @_;

    die "$intf is not using DHCP to get an IP address\n"
	unless ($request eq 'start' || is_dhcp_enabled($intf));
    
    die "$intf is disabled.\n"
    	if ($request ne 'stop' && is_intf_down($intf));

    my $tmp_dhclient_dir = '/var/run/vyatta/dhclient/';
    my $release_file = $tmp_dhclient_dir . 'dhclient_release_' . $intf;
    if ($request eq "release") {
	die "IP address for $intf has already been released.\n"
	    if (-e $release_file);

	print "Releasing DHCP lease on $intf ...\n";
	stop_dhclient($intf, 'op_mode');
	mkdir ($tmp_dhclient_dir) if (! -d $tmp_dhclient_dir );
	touch ($release_file);
    } elsif ($request eq "renew") {
        print "Renewing DHCP lease on $intf ...\n";
        run_dhclient($intf, 'op_mode');
	unlink ($release_file);
    } elsif ($request eq "start") {
	print "Starting DHCP client on $intf ...\n";
	touch("/var/lib/dhcp3/$intf");
	run_dhclient($intf);
    } elsif ($request eq "stop") {
	print "Stopping DHCP client on $intf ...\n";
	stop_dhclient($intf);
	unlink("/var/lib/dhcp3/dhclient_$intf\_lease");
	unlink("/var/lib/dhcp3/$intf");
	unlink("/var/run/vyatta/dhclient/dhclient_release_$intf");
        unlink("/var/lib/dhcp3/dhclient_$intf\.conf");
    } else {
	die "Unknown DHCP request: $request\n";
    }

    exit 0;
}

sub is_valid_name {
    my ($type, $name) = @_;
    die "Missing --dev argument\n" unless $name;

    my $intf = new Vyatta::Interface($name);
    die "$name does not match any known interface name type\n"
	unless $intf;

    my $vif = $intf->vif();
    die "$name is the name of VIF interface\n" ,
        "Need to use \"interface ",$intf->physicalDevice()," vif $vif\"\n"
	    if $vif;

    die "$name is a ", $intf->type(), " interface not an $type interface\n"
	if ($type ne 'all' and $intf->type() ne $type);

    die "$type interface $name does not exist on system\n"
	unless grep { $name eq $_ } getInterfaces();

    exit 0;
}

sub exists_name {
    my $name = shift;
    die "Missing --dev argument\n" unless $name;

    warn "interface $name does not exist on system\n"
	unless grep { $name eq $_ } getInterfaces();
    exit 0;
}

# generate one line with all known interfaces (for allowed)
sub show_interfaces {
    my $type = shift;
    my @interfaces = getInterfaces();
    my @match;

    foreach my $name (@interfaces) {
	my $intf = new Vyatta::Interface($name);
	next unless $intf;		# skip unknown types
	next if $skip_interface{$name};
	next unless ($type eq 'all' || $type eq $intf->type());
        if ($intf->vrid()){
            push @match, $name; # add all vrrp interfaces
        } elsif ($vif_name) {
	    next unless $intf->vif();
	    push @match, $intf->vif()
		if ($vif_name eq $intf->physicalDevice());
	} else {
	    push @match, $name
		unless $intf->vif() and $type ne 'all';
	}
    }
    print join(' ', @match), "\n";
}

# Determine current values for autoneg, speed, duplex
sub get_ethtool {
    my $dev = shift;

    open( my $ethtool, '-|', "$ETHTOOL $dev 2>&1" )
      or die "ethtool failed: $!\n";

    # ethtool produces:
    #
    # Settings for eth1:
    # Supported ports: [ TP ]
    # ...
    # Speed: 1000Mb/s
    # Duplex: Full
    # ...
    # Auto-negotiation: on
    my ($rate, $duplex);
    my $autoneg = 0;
    while (<$ethtool>) {
	chomp;
	return if ( /^Cannot get device settings/ );

	if ( /^\s+Speed: (\d+)Mb/ ) {
	    $rate = $1;
	} elsif ( /^\s+Duplex:\s(.*)$/ ) {
	    $duplex = lc $1;
        } elsif ( /^\s+Auto-negotiation: on/ ) {
	    $autoneg = 1;
	}
    }
    close $ethtool;
    return ($autoneg, $rate, $duplex);
}

sub set_speed_duplex {
    my ($intf, $nspeed, $nduplex) = @_;
    die "Missing --dev argument\n" unless $intf;

    # read old values to avoid meaningless speed changes
    my ($autoneg, $ospeed, $oduplex) = get_ethtool($intf);

    if (defined($autoneg) && $autoneg == 1) {
	# Device is already in autonegotiation mode
	return if ($nspeed eq 'auto');
    } elsif (defined($ospeed) && defined($oduplex)) {
	# Device has explicit speed/duplex but they already match
	return if (($nspeed eq $ospeed) && ($nduplex eq $oduplex));
    }

    my $cmd = "$ETHTOOL -s $intf";
    if ($nspeed eq 'auto') {
	$cmd .= " autoneg on";
    } else {
	$cmd .= " speed $nspeed duplex $nduplex autoneg off";
    }

    exec $cmd;
    die "exec of $ETHTOOL failed: $!";
}

# Check if speed and duplex value is supported by device
sub is_supported_speed {
    my ($dev, $speed, $duplex) = @_;

    my $wanted = sprintf("%dbase%s/%s", $speed,
			 ($speed == 2500) ? 'X' : 'T', ucfirst($duplex));

    open( my $ethtool, '-|', "$ETHTOOL $dev 2>/dev/null" )
      or die "ethtool failed: $!\n";

    # ethtool output:
    #
    # Settings for eth1:
    #	Supported ports: [ TP ]
    #	Supported link modes:   10baseT/Half 10baseT/Full
    #	                        100baseT/Half 100baseT/Full
    #	                        1000baseT/Half 1000baseT/Full
    #   Supports auto-negotiation: Yes
    my $mode;
    while (<$ethtool>) {
	chomp;
	if ($mode) {
	    last unless /^\t /;
	} else {
	    next unless /^\tSupported link modes: /;
	    $mode = 1;
	}

	return 1 if /$wanted/;
    }

    close $ethtool;
    return;
}

# Validate speed and duplex settings prior to commit
sub check_speed_duplex {
    my ($dev, $speed, $duplex) = @_;

    # most basic and default case
    exit 0 if ($speed eq 'auto' && $duplex eq 'auto');

    die "If speed is hardcoded, duplex must also be hardcoded\n"
	if ($duplex eq 'auto');

    die "If duplex is hardcoded, speed must also be hardcoded\n"
	if ($speed eq 'auto');

    die "Speed $speed, duplex $duplex not supported on $dev\n"
	unless is_supported_speed($dev, $speed, $duplex);

    exit 0;
}

# Produce list of valid speed values for device
sub allowed_speed {
    my ($dev) = @_;

    open( my $ethtool, '-|', "$ETHTOOL $dev 2>/dev/null" )
      or die "ethtool failed: $!\n";

    my %speeds;
    my $first = 1;
    while (<$ethtool>) {
	chomp;

	if ($first) {
	    next unless s/\tSupported link modes:\s//;
	    $first = 0;
	} else {
	    last unless /^\t /;
	}

	foreach my $val (split / /) {
	    $speeds{$1} = 1 if $val =~ /(\d+)base/;
	}
    }

    close $ethtool;
    print 'auto ', join(' ', sort keys %speeds), "\n";
}