path: root/debian/changelog

vyatta-cfg-system (0.15.55) unstable; urgency=low

  * Bugfix 4490: Wait for stability after marking partition bootable.

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 17 Jun 2009 16:22:47 -0700

vyatta-cfg-system (0.15.54) unstable; urgency=low

  * Bugfix 4490: Mark root partition as "bootable" in the master boot
    record (MBR).

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 17 Jun 2009 10:49:56 -0700

vyatta-cfg-system (0.15.53) unstable; urgency=low

  * Fix 4579: There is no validation for vrrp virtual-address like the
    one for interfaces address.

 -- Stig Thormodsrud <stig@vyatta.com>  Sun, 14 Jun 2009 14:30:17 -0700

vyatta-cfg-system (0.15.52) unstable; urgency=low

  * change default-policy to default-action for zones

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Wed, 03 Jun 2009 16:42:45 -0700

vyatta-cfg-system (0.15.51) unstable; urgency=low

  [ Stephen Hemminger ]
  * Tacplus no longer part of jenner

 -- An-Cheng Huang <ancheng@vyatta.com>  Tue, 02 Jun 2009 11:25:45 -0700

vyatta-cfg-system (0.15.50) unstable; urgency=low

  [ Stephen Hemminger ]
  * Print error message on failure to create group/user

  [ Mohit Mehta ]
  * move server,protocol to the same line in config file

  [ Stig Thormodsrud ]
  * Change tunnel multicast from on/off to enable/disable.
  * Fix bug preventing 'vyatta' user login.

  [ Stephen Hemminger ]
  * Fix deletion of pseudo-ethernet
  * Ignore patch and editor temporary files
  * Change how system login update works

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 01 Jun 2009 17:43:59 -0700

vyatta-cfg-system (0.15.48) unstable; urgency=low

  * Restore default facility for 'syslog console'
  * Revert "Restore default facility for 'syslog console'"
  * NTP management version 3

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 27 May 2009 10:12:45 -0700

vyatta-cfg-system (0.15.47) unstable; urgency=low

  [ Jon Andersson ]
  * Fix 4430: Not possible to create tunnel on fluctating interfaces
  * Allow multicast to be enabled on tunnel interfaces.

  [ Stig Thormodsrud ]

 -- Stig Thormodsrud <stig@vyatta.com>  Mon, 25 May 2009 14:19:19 -0700

vyatta-cfg-system (0.15.46) unstable; urgency=low

  * Fix install rules
  * Simplify ntp.conf
  * Fix post install script to adjust ntp.conf and net.agent

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Sun, 24 May 2009 10:15:03 -0700

vyatta-cfg-system (0.15.45) unstable; urgency=low

  * Put server at end of file
  * add iburst
  * Fix ntp.conf management

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 22 May 2009 14:38:52 -0700

vyatta-cfg-system (0.15.44) unstable; urgency=low

  * UNRELEASED

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 22 May 2009 14:36:24 -0700

vyatta-cfg-system (0.15.43) unstable; urgency=low

  * Run ntp during boot
  * Don't run net.agent

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 22 May 2009 10:22:30 -0700

vyatta-cfg-system (0.15.42) unstable; urgency=low

  * Change default NTP server
  * Don't flush out ntp.conf on boot
  * Revert "Change default NTP server"
  * Add NTP configuration file

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 22 May 2009 08:13:33 -0700

vyatta-cfg-system (0.15.41) unstable; urgency=low

  [ Stephen Hemminger ]
  * Avoid restarting NTP server if not needed

  [ Mohit Mehta ]
  * Fix Bug 4416 Add the ability to configure a specific server for
    DynDNS

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 19 May 2009 21:24:59 -0700

vyatta-cfg-system (0.15.40) unstable; urgency=low

  * Don't advertise loopback interface as an allowed value for zone
    interfaces

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 15 May 2009 12:20:42 -0700

vyatta-cfg-system (0.15.39) unstable; urgency=low

  * Fix Bug 4395 After local-zone is set, traffic from localhost is
    dropped

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 15 May 2009 11:02:14 -0700

vyatta-cfg-system (0.15.38) unstable; urgency=low

  * Allow specifying 'protocols' for syslog facility
  * Reindent syslog script

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 06 May 2009 17:21:16 -0700

vyatta-cfg-system (0.15.37) unstable; urgency=low

  * * do silent validity check when creating zone chains and adding from
    zone rules

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Wed, 06 May 2009 16:52:59 -0700

vyatta-cfg-system (0.15.36) unstable; urgency=low

  * Split up system login scripts

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 05 May 2009 13:51:14 -0700

vyatta-cfg-system (0.15.35) unstable; urgency=low

  * * restrict zone name to 20 characters

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 05 May 2009 11:50:15 -0700

vyatta-cfg-system (0.15.34) unstable; urgency=low

  * Move virtual-ethernet to pseudo-ethernet

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 29 Apr 2009 12:32:41 -0700

vyatta-cfg-system (0.15.33) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Replace md5 compare with a (hopefully) lighter-weight file compare.

  [ Stephen Hemminger ]
  * ntp: fix message

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 28 Apr 2009 14:09:30 -0700

vyatta-cfg-system (0.15.32) unstable; urgency=low

  * Using perl module for move() rather than system call.
  * Avoid unnecessary writing of file if it's the same contents.

 -- Stig Thormodsrud <stig@vyatta.com>  Mon, 27 Apr 2009 14:42:17 -0700

vyatta-cfg-system (0.15.31) unstable; urgency=low

  * Add configurable login banners.

 -- Stig Thormodsrud <stig@vyatta.com>  Sun, 26 Apr 2009 18:53:02 -0700

vyatta-cfg-system (0.15.30) unstable; urgency=low

  * * add jump to local-zone-out chain in OUTPUT chain for both [ip and
    ip6] tables

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 24 Apr 2009 18:31:57 -0700

vyatta-cfg-system (0.15.29) unstable; urgency=low

  * Add support for virtual-ethernet
  * New tacacs+ configuration templates

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 24 Apr 2009 13:01:24 -0700

vyatta-cfg-system (0.15.28) unstable; urgency=low

  [ Justin Fletcher ]
  * Allow for enterprise MIB

  [ Mohit Mehta ]
  * Fix Bug 4207 dns forwarding has hardcoded ethernet assumptions

  [ Stig Thormodsrud ]

 -- Stig Thormodsrud <stig@vyatta.com>  Thu, 23 Apr 2009 13:26:49 -0700

vyatta-cfg-system (0.15.27) unstable; urgency=low

  * Move disable-link-detect out of vyatta-cfg-quagga to interfaces

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 20 Apr 2009 09:22:39 -0700

vyatta-cfg-system (0.15.26) unstable; urgency=low

  * add default-policy node for zones. can be set to drop or reject
  * add default-policy node for zones. can be set to drop or reject

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Thu, 16 Apr 2009 17:46:19 -0700

vyatta-cfg-system (0.15.25) unstable; urgency=low

  * add read-write union install mechanism
  * handle default xen kernel
  * post-install changes

 -- An-Cheng Huang <ancheng@vyatta.com>  Tue, 14 Apr 2009 16:27:15 -0700

vyatta-cfg-system (0.15.24) unstable; urgency=low

  * add local-zone in|out firewall and clean-up code

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 10 Apr 2009 18:41:11 -0700

vyatta-cfg-system (0.15.23) unstable; urgency=low

  * Fix file syslog target

 -- Stephen Hemminger <shemminger@vyatta.com>  Fri, 10 Apr 2009 10:13:35 -0700

vyatta-cfg-system (0.15.22) unstable; urgency=low

  * fix xen kernel handling for union install

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 09 Apr 2009 13:49:59 -0700

vyatta-cfg-system (0.15.21) unstable; urgency=low

  *  Resolve problems with syslog.conf

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 09 Apr 2009 13:25:42 -0700

vyatta-cfg-system (0.15.20) unstable; urgency=low

  * Rewrite syslog management

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 08 Apr 2009 15:35:47 -0700

vyatta-cfg-system (0.15.19) unstable; urgency=low

  * change xen kernel detection

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 06 Apr 2009 11:41:23 -0700

vyatta-cfg-system (0.15.18) unstable; urgency=low

  * Fix "clear vrrp process".  Use new perl lib hierarchy.

 -- Stig Thormodsrud <stig@vyatta.com>  Sun, 05 Apr 2009 13:14:14 -0700

vyatta-cfg-system (0.15.17) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Change "syntax" check to "commit" check for virtual interfaces.
  * 0.15.16

  [ Stephen Hemminger ]
  * Update template to handle change in default syslog.conf

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 01 Apr 2009 16:52:02 -0700

vyatta-cfg-system (0.15.16) unstable; urgency=low

  * Change "syntax" check to "commit" check for virtual interfaces.

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 01 Apr 2009 16:27:35 -0700

vyatta-cfg-system (0.15.15) unstable; urgency=low

  * Don't double log quagga messages
  * Help text spelling fix
  * Update help text to show which facility is quagga
  * Use interface check program

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 01 Apr 2009 08:46:51 -0700

vyatta-cfg-system (0.15.14) unstable; urgency=low

  * Turn off forwarding delay if STP is off
  * Set forwarding-delay when STP is enabled

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 31 Mar 2009 14:12:24 -0700

vyatta-cfg-system (0.15.13) unstable; urgency=low

  * UNRELEASED

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 26 Mar 2009 14:53:20 -0700

vyatta-cfg-system (0.15.12) unstable; urgency=low

  * Bugfix 4139:  Increase minimum root filesystem size to 1 GB.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 26 Mar 2009 14:11:38 -0700

vyatta-cfg-system (0.15.11) unstable; urgency=low

  * Revert "Split login authentication configuration into three scripts"

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 26 Mar 2009 10:17:39 -0700

vyatta-cfg-system (0.15.10) unstable; urgency=low

  * Add "interface ethernet <> bridge-group bridge" update tag in
    addition to create tag.

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 25 Mar 2009 18:22:28 -0700

vyatta-cfg-system (0.15.9) unstable; urgency=low

  * Change bridge check from "syntax" to "create".

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 25 Mar 2009 17:45:33 -0700

vyatta-cfg-system (0.15.8) unstable; urgency=low

  * move keepalived.pm to vyatta-cfg

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 25 Mar 2009 16:43:25 -0700

vyatta-cfg-system (0.15.7) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix bare file handle warning
  * Split login authentication configuration into three scripts

  [ Stig Thormodsrud ]
  * Change "syntax" check to "commit" check for "bridge-group bridge".

  [ Stephen Hemminger ]
  * Fix update of description

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 25 Mar 2009 14:19:22 -0700

vyatta-cfg-system (0.15.6) unstable; urgency=low

  * Change "syntax" check to a "commit" check.

 -- Stig Thormodsrud <stig@vyatta.com>  Tue, 24 Mar 2009 17:53:17 -0700

vyatta-cfg-system (0.15.5) unstable; urgency=low

  * Save interface description in kernel

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 23 Mar 2009 12:27:42 -0700

vyatta-cfg-system (0.15.4) unstable; urgency=low

  [ Stephen Hemminger ]
  * Change update to create on multi-nodes

  [ Mohit Mehta ]
  * will help debug bug 4181 if and when it happens

  [ An-Cheng Huang ]
  * use renamed tacplus package

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 23 Mar 2009 11:11:38 -0700

vyatta-cfg-system (0.15.3-14) unstable; urgency=low

  * Fix 4190: vrrp may fail to start daemon if previous commit of vrrp
    partially failed

 -- Stig Thormodsrud <stig@vyatta.com>  Thu, 12 Mar 2009 10:58:43 -0700

vyatta-cfg-system (0.15.3-13) unstable; urgency=low

  [ Mohit Mehta ]
  * use code from Vyatta::Misc where is_dhcp_enabled() is already
    defined

  [ Stephen Hemminger ]
  * Fix perlcritic warning about bare file handle
  * Fix delete of bonding vif
  * Don't allow vif on disabled bonding interface

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 11 Mar 2009 21:36:16 -0700

vyatta-cfg-system (0.15.3-12) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Fix 4183: No auto completion for group number when running 'clear
    vrrp

  [ Bob Gilligan ]
  * Remove per-interface firewall templates.  They are generated now.

 -- Bob Gilligan <gilligan@vyatta.com>  Mon, 09 Mar 2009 11:16:47 -0700

vyatta-cfg-system (0.15.3-11) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Remove prefix mask on vip if present since it can't be using in
    arping.

  [ Stephen Hemminger ]
  * Fix path to lsof

 -- An-Cheng Huang <ancheng@vyatta.com>  Sat, 07 Mar 2009 23:25:55 -0800

vyatta-cfg-system (0.15.3-10) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix perlcritic warnings
  * Change sudo ability of some operator related commands
  * More checking for open() of log

  [ Stig Thormodsrud ]
  * Move changes file to /var/run/vrrpd and make sure the directory
    exists.
  * Remove unused directory.
  * Specify source address with arping since we no longer require an IP

 -- Stig Thormodsrud <stig@io.vyatta.com>  Fri, 06 Mar 2009 18:59:46 -0800

vyatta-cfg-system (0.15.3-9) unstable; urgency=low

  * Fix path on hwclock cleanout
  * Run through tidy for indent
  * Use vyatta-interfaces.pl to show available bonding devices
  * Use vyatta-interfaces.pl to check bridge validity
  * Fix slave device startup

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 03 Mar 2009 10:56:22 -0800

vyatta-cfg-system (0.15.3-8) unstable; urgency=low

  * Convert to bonding vif to use netlink.
  * Change install-system to handle CF better
  * Remove out of date quick-install

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 02 Mar 2009 16:11:10 -0800

vyatta-cfg-system (0.15.3-7) unstable; urgency=low

  [ Mohit Mehta ]
  * let admin user set arp paramters

  [ Stig Thormodsrud ]
  * Fix 3778: vrrp should allow prefix to be included with the virtual-
    address
  * Fix breakage from previous cleanup commit.
  * Fix 4068: 'show vrrp' last transition times are not updated when a
    transition occurs on boot.
  * Fix 4152: Add support for VRRP operation on unnumbered interfaces

 -- Stig Thormodsrud <stig@io.vyatta.com>  Sun, 01 Mar 2009 12:15:45 -0800

vyatta-cfg-system (0.15.3-6) unstable; urgency=low

  [ An-Cheng Huang ]
  * fix logic and shell syntax
  * up the bridge interface when it's created

  [ Mohit Mehta ]
  * Fix Bug 2463 Allow the neighbor table threshold values to be

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 27 Feb 2009 19:08:52 -0800

vyatta-cfg-system (0.15.3-5) unstable; urgency=low

  * set default values for ipv6 accept_redirects and accept_source_route

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 24 Feb 2009 18:56:48 -0800

vyatta-cfg-system (0.15.3-4) unstable; urgency=low

  * Allow installation on virtio disk
  * Don't depend on /proc/ide

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 24 Feb 2009 15:41:57 -0800

vyatta-cfg-system (0.15.3-3) unstable; urgency=low

  [ Stephen Hemminger ]
  * Take out ipt_rlsnmpstats module

  [ Mohit Mehta ]
  * Fix Bug 3951 default values for kernel tunable security parameters
    under firewall

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Thu, 19 Feb 2009 19:12:45 -0800

vyatta-cfg-system (0.15.3-2) unstable; urgency=low

  * fix spelling mistake

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 10 Feb 2009 10:10:03 -0800

vyatta-cfg-system (0.15.3-1) unstable; urgency=low

  [ Stephen Hemminger ]
  * bridge: handle non ethernet devices in bridge

  [ Mohit Mehta ]
  * permit operator-level user to issue show and clear commands for
    firewall

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 06 Feb 2009 17:45:06 -0800

vyatta-cfg-system (0.15.3) unstable; urgency=low

  * Fix delete of bonding interface
  * Replace bare word file handle

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 26 Jan 2009 16:25:33 -0800

vyatta-cfg-system (0.15.2) unstable; urgency=low

  * disable bridge node should be same as disable ethernet
  * Bridge/bonding update to new syntax

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 12 Jan 2009 16:51:36 -0800

vyatta-cfg-system (0.15.1) unstable; urgency=low

  [ Rick Balocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3731

  [ Stephen Hemminger ]
  * Fix password changer to deal with update config format
  * Make standalone passwd reset change vyatta not root
  * Leave root account disabled
  * Standalone tool now changes vyatta not root password

  [ Rick Balocca ]
  * Fix typo

  [ rbalocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2426

  [ Stephen Hemminger ]
  * Mount root filesystem with noatime
  * Add completion for allowed values
  * Don't force rebuild of ssh_host_key on each boot
  * Remove OFR from grub lines
  * fix grammar of previous patch
  * Don't restart sshd if not needed
  * Always restart ssh

  [ Robert Bays ]
  * add basic tacacs+ support

  [ Stephen Hemminger ]
  * Avoid sleep in ntp restart
  * Speed up boot
  * Remove extra call to set hwclock on startup
  * typo in last commit
  * Speed up addition of users to system

  [ Mohit Mehta ]
  * dhcp action scripts for linkup/down

  [ Stephen Hemminger ]
  * Fix sysctl key values

  [ An-Cheng Huang ]
  * add support for development build

  [ Mohit Mehta ]
  * Fix Bug 3917 dhcp brings interface up for lease acquire/renew even
    though interface has been disabled in CLI

  [ Stephen Hemminger ]
  * Rename VyattaKeepalived to Vyatta::Keepalived
  * Convert to Vyatta::Config hierarchy

  [ Bob Gilligan ]
  * Bugfix 3747:  Allow user to break previously existing RAID group.

  [ Stephen Hemminger ]
  * VyattaConfig -> Vyatta::Config
  * Add correct help for bonding modes

  [ Rick Balocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3963

  [ Stephen Hemminger ]
  * use vyatta-link-detect
  * Remove OFR from grub lines
  * fix grammar of previous patch
  * need full path to linkdetect

  [ An-Cheng Huang ]
  * update maintainer information
  * "files" file should be removed before package build

  [ Stephen Hemminger ]
  * Add acpid

  [ slioch ]
  * removed unprintable form-feed characters. This was causing xml
    validation to fail within the webgui.

  [ Mohit Mehta ]
  * Fix Bug 4022 dynamic dns config fails during system boot if
    interface does not exist

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 08 Jan 2009 09:25:28 -0800

vyatta-cfg-system (0.15) unstable; urgency=low

	  3.2.0
  [ Mark O'Brien ]


  [ Bob Gilligan ]
  * Bugfix 3738: Improve safety in installing onto RAID sets.
  * Bugfix 3932

  [ Stig Thormodsrud ]
  * Fix 3929: Operator level user now need sudo password to run "clear
    arp

  [ Bob Gilligan ]
  * Bugfix 3928:  Need to install vyatta-raid-event script.

  [ Stig Thormodsrud ]
  * Fix 3920: Operator level users require sudo permission for nat
  * Fix 3918: Operator level users require sudo permission for ipv6
    clear

  [ Stephen Hemminger ]
  * Make sure install-system only run with root privledges

  [ Mohit Mehta ]
  * make 'show interfaces wirelessmodem <wlm(num)> stats' work from
    operator mode

  [ Stephen Hemminger ]
  * Handle older format config files in password reset

  [ An-Cheng Huang ]
  * fix for bug 2313: add support for "Region/City" timezone
    specification.

  [ Mohit Mehta ]
  * rmeove ddclient script from ppp ip-up directory as we configure

  [ Stig Thormodsrud ]
  * Add config to disable ip/ipv6 forwarding.

  [ Mohit Mehta ]
  * change input parameter name from dhclient_script to outside_cli to

  [ Robert Bays ]
  * bug 3791: set sysObjectID and sysDescr
  * bug 1587: add error message when user tries native install from non-
    union media

  [ Bob Gilligan ]
  * Bugfix: 3841

  [ Stephen Hemminger ]
  * Fix standalone password reset
  * Allow more ethtool commands
  * Make stanalone passwd reset work

  [ Mohit Mehta ]
  * Fix Bug 3840 System error reported on initial SNMP commit with trap
    target

  [ Stephen Hemminger ]
  * Handle config file format change in standalone reset
  * Fix password changer to deal with update config format

  [ An-Cheng Huang ]
  * add firewall configuration to bridge interface

  [ Stephen Hemminger ]
  * Fix bad tab completion on interfaces/bonding

  [ Mohit Mehta ]
  * Fix Bug 3567 Debug messages are not logged by default on upgraded
    system

  [ Bob Gilligan ]
  * Bugfix: 3687:  Only start mdadm if we have a RAID group as root
    filesystem.
  * Bugfix: 3775: Allow RAID-1 to be configured on disks with different
    sizes

  [ Stig Thormodsrud ]
  * Change telnet allow-root type from txt to bool.

  [ Stephen Hemminger ]
  * Need sudo when editing ssh config file
  * Fix parsing of allow-root field
  * Revert "Block remote access to rpc-bind port"
  * Block remote access to rpc-bind port

  [ Bob Gilligan ]
  * Bugfix: 3744

  [ An-Cheng Huang ]
  * remove unused files
  * use epoch in package version number
  * add ssh key blacklists

  [ Stephen Hemminger ]
  * Allow non-livecd union install
  * install-system can only run from livecd

  [ Bob Gilligan ]
  * Bugfix: 3226

  [ Robert Bays ]
  * fix ssh keygen on startup

  [ Mohit Mehta ]
  * - redo internal snmpv3 user creation for linkUpDownNotifications
  * Fix Bug 3751 configuring multiple global syslog facilities
    overwrites previous ones in /etc/syslog.conf

  [ Stephen Hemminger ]
  * Go back to simpler syslog config
  * Don't allow operator to reboot system

  [ Bob Gilligan ]
  * Bugfix: 3226

  [ Stephen Hemminger ]
  * Revert "Set correct mode on configuration mode"
  * Set correct mode on configuration mode

  [ An-Cheng Huang ]
  * fix xen grub setup

  [ slioch ]
  * Revert "Change allow-root nodes to boolean"

  [ Stephen Hemminger ]
  * Change allow-root nodes to boolean

  [ Mohit Mehta ]
  * don't poll resolv files for nameserver changes - it messes up
    statistics

  [ rbalocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3735

  [ Bob Gilligan ]
  * Bugfix: 3743

  [ Mohit Mehta ]
  * Fix Bug 3609 - "show tech-support" does not display open file
    information for operator level user

  [ Bob Gilligan ]
  * Bugfix: 3727
  * Bugfix: 3572

  [ Stephen Hemminger ]
  * Standalone passwd reset prompt for password
  * Workaround problems with mkpasswd

  [ rbalocca ]
  * Add vyatta-grub-setup
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3712

  [ Bob Gilligan ]
  * Bugfix: 3492
  * Bugfix: 3515
  * Bugfix: 3703

  [ Stephen Hemminger ]
  * No longer need to turn off SACK
  * Allow any number of bridge devices
  * Allow any number of tunnel devices

  [ Rick Balocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3694

  [ Mohit Mehta ]
  * Fix Bug 3607 Error setting DNS forwarding to use DHCP

  [ Stephen Hemminger ]
  * Don't need to list ifenslave twice
  * Add support for bonding

  [ Robert Bays ]
  * expose the union option in install-system
  * fix bug 3863
  * Don't kill An-Cheng's commits.
  * change to native install from a USB stick
  * remove complex options from union install
  * changed union install to support multiple directories

  [ An-Cheng Huang ]
  * add postinst hook for install-system

  [ Mohit Mehta ]
  * use script for setting/deleting system nameservers
  * preserve system name-servers order in /etc/resolv.conf as configured
    in CLI
  * - change forced update wait time from 2 weeks to 4 weeks if no
    change in IP as per the free service provided by dyndns
  * - remove ddclient cache before restarting

  [ Robert Bays ]
  * fixes to install-system and grub-setup for xen hypervisor and
    device.map

  [ Mohit Mehta ]
  * - use apt per interface ddclient files

  [ Bob Gilligan ]
  * Account for size of diag partition when calculating disk size, which
    is needed

  [ Mohit Mehta ]
  * first attempt at implementing CLI support for Dynamic DNS
  * better worded warning when no name-servers set under 'system name-
    server'
  * released interface should be flagged as a warning rather than a
    commit failed

  [ Robert Bays ]
  * add functioanlity for binary images to install system

  [ Mohit Mehta ]
  * prompt warning for no nameservers if no nameservers set and no
    interface set to use dhcp

  [ Stephen Hemminger ]
  * Add support for aufs

  [ Mohit Mehta ]
  * polish up DNS forwarding error messages
  * show bridge interfaces in allowed values as well if configured to
    use dhcp
  * move from a 'ignore-interface' model to a 'listen-on' model for DNS
    forwarding
  * - get ddclient package for Dynamic DNS

  [ An-Cheng Huang ]
  * remove 2nd timeout to avoid 64-bit boot problem

  [ Bob Gilligan ]
  * Update install-system and grub-setup to handle RAID-1 configuration.

  [ Rick Balocca ]
  * Merge from "hollywood"

  [ rbalocca ]
  * Merge from "hollywood"

  [ Bob Gilligan ]
  * Add mdadm package to support RAID-1 configurations.

  [ Mohit Mehta ]
  * - servers being used for dns forwarding written to dnsmasq.conf with
    more info in comments
  * log dnsmasq output to /var/log/dnsmasq.log on start-up and whilst
    running (i.e. when sent a signal to log)
  * tighten the checks for checking the existence or removal or
    nameservers
  * tighten regex pattern to get dhclient resolv files

  [ Stig Thormodsrud ]
  * Change udevtrigger to udevadm trigger.

  [ Mohit Mehta ]
  * remove earlier added dnsmasq options
  * update dns forwarding nameservers on dhcp lease updates
  * any change in system name-servers should be communicated to dnsmasq
  * configure dnsmasq to use dns-servers as specified in CLI
  * use config rather than /etc/resolv.conf to get system set
    nameservers
  * code to specify DNS forwarding nameservers (system, dhcp, explicitly
    specified) using CLI
  * tighten syntax check
  * change 'service dns forward' to 'service dns forwarding'
  * this better detects the interfaces in /proc/net/dev

  [ Rick Balocca ]
  * Script cleanup

  [ Mohit Mehta ]
  * change DNS forwarding CLI from 'service dns-forwarding' to 'service
    dns forward'
  * add missing comma

  [ Mark O'Brien ]
  * control: added ifenslave-2.6 to debian control file

  [ rbalocca ]
  * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3542

  [ Mohit Mehta ]
  * add command for user to enter interfaces on which not to listen for
    DNS queries
  * - add ability to set cache-size for DNS forwarding from CLI

  [ Rick Balocca ]
  * Cleanup
  * Additional fixes for http://bugzilla.vyatta.com/show_bug.cgi?id=3520

  [ rbalocca ]
  * Fixes for: http://bugzilla.vyatta.com/show_bug.cgi?id=3520
    http://bugzilla.vyatta.com/show_bug.cgi?id=3519
    http://bugzilla.vyatta.com/show_bug.cgi?d for:
    http://bugzilla.vyatta.com/show_bug.cgi?id=3520
    http://bugzilla.vyatta.com/show_bug.cgi?id=3519
    http://bugzilla.vyatta.com/show_bug.cgi?id=3518 and perhaps others

  [ Mohit Mehta ]
  * First parts of DNS forwarding stuff

  [ Stig Thormodsrud ]
  * Add IPv6 address to comp_help for bridge/tunnel
  * Enable IPv6 forwarding.

  [ Stephen Hemminger ]
  * Get rid of debian build warning

  [ Rick Balocca ]
  * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3225
  * Partial fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3225

  [ Bob Gilligan ]
  * Bugfix: 3519

  [ rbalocca ]
  * Since this packages changes the bash-completion conf file, it must
    be installed after bash-completion

  [ Mohit Mehta ]
  * add dnsmasq package to be included in the build

  [ rbalocca ]
  * The postinst was printing a '?'

  [ An-Cheng Huang ]
  * fix for bug 3459: make bash-completion use "builtin set".

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 25 Nov 2008 19:09:21 -0800

vyatta-cfg-system (0.14) unstable; urgency=low

	  3.1.4
  [ Mark O'Brien ]


  [ Robert Bays ]
  * fix ssh keygen on startup

  [ An-Cheng Huang ]
  * remove unused files
  * use epoch in package version number
  * add ssh key blacklists

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 14 Oct 2008 17:30:18 -0700

vyatta-cfg-system (0.13) unstable; urgency=low

	  3.1.3
  [ Mark O'Brien ]


  [ Bob Gilligan ]
  * Bugfix: 1292
  * Bugfix: 1292

  [ rbalocca ]
  * More spaces (bugs http://bugzilla.vyatta.com/show_bug.cgi?id=3549
    and http://bugzilla.vyatta.com/show_bug.cgi?id=3552)
  * Fixes for bugs: http://bugzilla.vyatta.com/show_bug.cgi?id=3549 and
    http://bugzilla.vyatta.com/show_bug.cgi?id=3552

  [ Rick Balocca ]
  * Merge from islavista
  * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3520

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 19 Aug 2008 17:48:26 -0700

vyatta-cfg-system (0.12) unstable; urgency=low

	  3.1.2
  [ Mark O'Brien ]


  [ Mohit Mehta ]
  * => Modified vyatta_update_resolv.pl to update (i.e. add and remove)
    'name-server' and 'domain-name-server' options

  [ root ]
  * Fix 3359: changing telnet setting drops other telnet sessions.

  [ Stig Thormodsrud ]
  * Fix 3460: vrrp authentication error msg is wrong

  [ Stephen Hemminger ]
  * purge any old entries from sudoers
  * Don't add ide=nodma twice

  [ rbalocca ]
  * Remove debugging
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2807

  [ Robert Bays ]
  * fix for bug 3095

  [ Stephen Hemminger ]
  * Modify upgrade procedure for /etc/sudoers

  [ An-Cheng Huang ]
  * fix for bug 3417: use UUID in grub config file

  [ Stephen Hemminger ]
  * Fix problem if install-system run twice

  [ Bob Gilligan ]
  * Bugfix: 1592

  [ Stephen Hemminger ]
  * Missing -e causes sudoers problem
  * Can't use logger in standalone
  * get rid of extra fi from last commit
  * Change syslogging of authorization related commands
  * Use logger to write system log
  * Make standalone password reset work
  * Handle multiple slashes in passwd

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Wed, 23 Jul 2008 21:35:54 -0700

vyatta-cfg-system (0.11) unstable; urgency=low

	  3.1.1
  [ Mark O'Brien ]


  [ Stig Thormodsrud ]
  * Fix 3379: tunnel interfaces are artificially limited to tun0-tun9
  * Add cli to enable proxy arp on a interface.

  [ Bob Gilligan ]
  * Bugfix: 1292

  [ Stephen Hemminger ]
  * translate slash in password
  * Spellin fixes

  [ Auto Build ]
  * Remove dependency on grub-pc

  [ rbalocca ]
  * Insist on vyatta-keepalived
  * Additional dependencies

  [ Bob Gilligan ]
  * Bugfix: 3259

  [ Stig Thormodsrud ]
  * Add module version for vrrp.
  * Fix 2030: Enhancement: VRRP preemption hold down timer

  [ Stephen Hemminger ]
  * Prompt for vyatta and root password
  * Use tr command rather than awk
  * Use UUID to find root filesystem
  * Surpress messages by default
  * Add passwd sync script

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Sat, 28 Jun 2008 11:22:12 -0700

vyatta-cfg-system (0.10) unstable; urgency=low

	  3.1.0
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 3032: rename pre-glendale config files during install-
    system.

  [ Robert Bays ]
  * fix bug 3039

  [ Stephen Hemminger ]
  * Turn off framebuffer (by default)

  [ Stig Thormodsrud ]
  * Fix 1818: Add disable option to vrrp.

  [ Stephen Hemminger ]
  * Enable vga framebuffer on console
  * Allow operator to run wanpipemon

  [ Bob Gilligan ]
  * Bugfix: 3305

  [ Stig Thormodsrud ]
  * Fix 3328: operator can't issue "show vrrp".

  [ Stephen Hemminger ]
  * wrong option to useradd
  * Put vyatta users in the users group

  [ Stig Thormodsrud ]
  * Fix 787: Add a command to force vrrp state transition to backup

  [ Stephen Hemminger ]
  * Switch back to snmpd
  * Remove shell template (not ready yet).

  [ Robert Bays ]
  * fix for bugs 3294 and 3296

  [ Stephen Hemminger ]
  * Turn off TCP SACK
  * Pull in vyatta version of snmpd

  [ Mohit Mehta ]
  * Fix Bug 3094 SMUX port is open to outside connections

  [ Stephen Hemminger ]
  * Allow any user to be in config file
  * Rework how user accounts are managed
  * re-indent login script
  * Add GPL license

  [ Tom Grennan ]
  * add libnetaddr-ip-perl dependency

  [ Stig Thormodsrud ]
  * Fix 2705: Add "clear vrrp process" command.
  * Fix vrrp snoop_for_master() to also work with AH authentication.
  * Make vrrp pcap filter more specific.
  * Fix 3273: "show vrrp summary" output doesn't line-up when using
    vlans
  * Fix 3155: setting the third vrrp member with the highest priority
    doesn't change (update) the backup

  [ rbalocca ]
  * Add vyatta-busybox to dependencies
  * Ignore derived files

  [ rbays ]
  * update install-system to work with xen setup

  [ Stig Thormodsrud ]
  * Fix 3251: vrrp should also send a gratuitous arp reply on master
    transition
  * Fix 3144: VRRP backup obtains VIP resulting in a duplicate IP
    situation.
  * Change dependancy from keepalived to vyatta-keepalived.

  [ rbays ]
  * fix install system to use the correct kernels in grub.cfg

  [ An-Cheng Huang ]
  * fix typo in rl-system.init

  [ Stephen Hemminger ]
  * Move sysctl configuration to /etc/vyatta-sysctl.conf

  [ Stig Thormodsrud ]
  * Set initial vrrp state based on existing state if available.

  [ rbalocca ]
  * Convert to our method of changelog creation

  [ Mohit Mehta ]
  * Modifications to send link up/down traps to configured trap-target
  * Modifications for enabling net-snmp's interaction with quagga for
    bgp, ospf and rip mib traversals

  [ Stephen Hemminger ]
  * watchlink is no longer used

  [ rbalocca ]
  * Pretty print the grub.cfg file
  * Partitions in grub-pc now start at 1 (instead of 0)
  * Update install-system to use grub-pc
  * Revert "remove deprecated install scripts"
  * config.boot.default is not moved to the top level repo (build-
    iso.git)

  [ Mohit Mehta ]
  * Fix Bug 3172 set interfaces tunnel <> key <> allowed after tunnel
    creation

  [ Stig Thormodsrud ]
  * Fix 3148: can't delete bridge interface

  [ Mohit Mehta ]
  * Fix Bug 3164 set interfaces tunnel tun0 remote-ip <> doesn't take
    effect after committing

  [ rbalocca ]
  * Merge from glendale

  [ Mohit Mehta ]
  * Bug 3069 Help strings should be standardized
  * Bug 3069 Help strings should be standardized
  * Fix Bug 3069 Help strings should be standardized
  * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal'
    into Vyatta CLI

  [ An-Cheng Huang ]
  * fix dependencies

  [ Stephen Hemminger ]
  * Allow operator to run ntpdate

  [ Mohit Mehta ]
  * Fix Bug 2778 VRRP: add ability to run scripts on state transition

  [ Tom Grennan ]
  * consolidate proc/sys flag settings to livecd/install hook
  * remove deprecated install scripts

  [ Mohit Mehta ]
  * Fix Bug 802 VRRP - add "show vrrp summary" command (TC 3.2.5.7.2)

  [ Stig Thormodsrud ]
  * Add tshark dependency on vyatta-cfg-system.

  [ Stephen Hemminger ]
  * Fix format of date from rl-system.init

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 17 Jun 2008 09:26:27 -0700

vyatta-cfg-system (0.9) unstable; urgency=low

  3.0.5


 -- Mark O'Brien <mobrien@vyatta.com>  Tue, 06 May 2008 12:43:15 -0700

vyatta-cfg-system (0.8) unstable; urgency=low

  3.0.4
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 3225: only insert sudoers if not present.

  [ Stig Thormodsrud ]
  * Mimic the transaction mechanism to only restart the vrrp daemon
    once/commit.

  [ rbalocca ]
  * config.boot.default is not moved to the top level repo (build-
    iso.git)

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Mon, 05 May 2008 16:40:35 -0700

vyatta-cfg-system (0.7) unstable; urgency=low

  3.0.3
  [ Mark O'Brien ]


  [ Stephen Hemminger ]
  * watchlink is no longer used

  [ rbalocca ]
  * Indicate the VC4.0.2 release candidate in the changelog

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Tue, 29 Apr 2008 16:42:17 -0700

vyatta-cfg-system (0.6) unstable; urgency=low

  VC4.0.2


 -- Mark O'Brien <mobrien@vyatta.com>  Sat, 19 Apr 2008 11:56:03 -0700

vyatta-cfg-system (0.5) unstable; urgency=low

  VC4.0.2 release candidate
  [ Mark O'Brien ]


  [ Stig Thormodsrud ]
  * Fix 3148: can't delete bridge interface

  [ rbalocca ]
  * Remove vestigal version file from vyatta-cfg-system

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Wed, 16 Apr 2008 09:50:05 -0700

vyatta-cfg-system (0.4) unstable; urgency=low

  3.0.2
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 3032: rename pre-glendale config files during install-
    system.
  * fix for bug 3087: add proper dependency to ensure install order.

  [ Bob Gilligan ]
  * Bugfix: 3021

  [ Mark O'Brien ]
  * Update version file to 3.0.1
  * 3.0.1

  [ Michael Larson ]
  * up proc limit for rmem_max to support zebra netlink buffer size
    increase.

  [ Mohit Mehta ]
  * Fix Bug 3027 Unable to configure SNMP community client address

  [ Robert Bays ]
  * fix bug 3039

  [ Stephen Hemminger ]
  * Allow operator to run ntpdate

  [ Stig Thormodsrud ]
  * Add vrrp vip addresses to watchlink exclude file.
  * Fix 3086: VRRP only allows up to 20 virtual IPs

  [ rbalocca ]
  * Fix debian dependencies
  * Line up the colons with the one from the copyright notice (in show
    version)
  * Set dependencies on either bash or vyatta-bash
  * Move the copyright dates over (bug 3028)

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Fri, 04 Apr 2008 18:00:34 -0700

vyatta-cfg-system (0.3) unstable; urgency=low

  VC4.0.1
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 2083: add radius authentication support.

  [ Mark O'Brien ]
  * Update version file to VC4.0.1

  [ Mohit Mehta ]
  * Fix Bug 2707 Missing from Glendale
  * CLI tab enhancement at "set interfaces ethernet <> address"

  [ Robert Bays ]
  * fixes for bugs 2499, 2967

  [ Stephen Hemminger ]
  * add operator and admin to linux group adm
  * add option to disable root login over ssh
  * fix ssh allow-root template
  * put operator in operator group
  * add explicit list of commands in sudoers
  * don't allow illegal hostnames
  * allow numbers in hostname
  * allow non-root to clear nat counters
  * Replace VPL with GPLv2
  * Changes for license/copyright
  * Update to GPLv2
  * Move init-floppy to /opt/vyatta/sbin
  * Allow operator to set date.

  [ Stig Thormodsrud ]
  * Fix 2877: Bridge group can not be assiged to vif sub interfaceZ
  * Fix parse error in /etc/sudoers
  * Fix 2880 SNMP configuration file issues
  * Fix 2695 GRE tunnel doesn't work with "key"

  [ rbalocca ]
  * Fix for bug #2934
  * Fix for bug #2542 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2542
    )
  * Fix for bug #2921 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2921
    )
  * Revert "Fix for bug #2921 (
    http://bugzilla.vyatta.com/show_bug.cgi?id=2921 )"
  * Improve the package repository template
  * Fix for bug #2969 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2969
    )
  * Update copyright for "show version"

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Tue, 18 Mar 2008 19:03:58 -0700

vyatta-cfg-system (0.2) unstable; urgency=low

  vc4.0.0
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * clean up temp file in delete fail case
  * convert templates to new syntax
  * add commit check for user password
  * revise the password check
  * fix for bug 2768: add "dynamic" keyword to server entry.
  * template cleanup and fix for bug 2785: update /etc/mailname with
    hostname.
  * prevent ':' in full name (separator in passwd)
  * allow empty full-name
  * fix for bug 2547: don't require/output ':' after "hw-id".
  * fix for bug 2855: change help text
  * debian's latest update to "bash" (3.1dfsg-9) broke the completion
    mechanism.
  * fix for bug 2764: rename user level
  * use vyattacfg for config files

  [ Mark O'Brien ]
  * Updated syslog help with severity information.
  * Update version file to vc4.0.0

  [ Michael Larson ]
  * bump up rmem_max limit to 223232 (in conjunction with fix for zebra)

  [ Stig Thormodsrud ]
  * update tunnel help strings with defaults
  * add a few missing help strings
  * - Fix 2745: bridge-group cost - syntax error
  * Fix 2819 Plain-text authentication should be identified as such.
  * Fix syntax error in "interface bridge <> priority".

  [ Tom Grennan ]
  * source /etc/default/vyatta instead of configuring install-system
  * remove stale CONFIG_PARTITION comments

  [ rbalocca ]
  * Add version file
  * Update version file to 4.0.0
  * 4.0.0
  * vyatta-cfg-system postinst was clobbering version file
  * These files will be changed by autobuild-git-eureak
  * Missing version file in Makefile.am

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Mon, 25 Feb 2008 17:38:40 -0800

vyatta-cfg-system (0.1) unstable; urgency=low

  * Initial Release.

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 18 Oct 2007 11:03:18 -0700