diff options
Diffstat (limited to 'mibs/OSPF-TRAP-MIB.txt')
| -rw-r--r-- | mibs/OSPF-TRAP-MIB.txt | 443 |
1 files changed, 0 insertions, 443 deletions
diff --git a/mibs/OSPF-TRAP-MIB.txt b/mibs/OSPF-TRAP-MIB.txt deleted file mode 100644 index 8a3ab990..00000000 --- a/mibs/OSPF-TRAP-MIB.txt +++ /dev/null @@ -1,443 +0,0 @@ -OSPF-TRAP-MIB DEFINITIONS ::= BEGIN - - IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress - FROM SNMPv2-SMI - MODULE-COMPLIANCE, OBJECT-GROUP - FROM SNMPv2-CONF - ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState, - ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState, - ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, - ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState, - ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId, - ospfExtLsdbLimit, ospf - FROM OSPF-MIB; - - ospfTrap MODULE-IDENTITY - LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 - ORGANIZATION "IETF OSPF Working Group" - CONTACT-INFO - " Fred Baker - Postal: Cisco Systems - 519 Lado Drive - Santa Barbara, California 93111 - Tel: +1 805 681 0115 - E-Mail: fred@cisco.com - - Rob Coltun - Postal: RainbowBridge Communications - Tel: (301) 340-9416 - E-Mail: rcoltun@rainbow-bridge.com" - DESCRIPTION - "The MIB module to describe traps for the OSPF - Version 2 Protocol." - ::= { ospf 16 } - --- Trap Support Objects - --- The following are support objects for the OSPF traps. - -ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 } -ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 } - - ospfSetTrap OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(4)) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "A four-octet string serving as a bit map for - the trap events defined by the OSPF traps. This - object is used to enable and disable specific - OSPF traps where a 1 in the bit field - represents enabled. The right-most bit (least - significant) represents trap 0." - ::= { ospfTrapControl 1 } - - - ospfConfigErrorType OBJECT-TYPE - SYNTAX INTEGER { - badVersion (1), - areaMismatch (2), - unknownNbmaNbr (3), -- Router is Dr eligible - unknownVirtualNbr (4), - authTypeMismatch(5), - authFailure (6), - netMaskMismatch (7), - helloIntervalMismatch (8), - deadIntervalMismatch (9), - optionMismatch (10) } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Potential types of configuration conflicts. - Used by the ospfConfigError and ospfConfigVir- - tError traps." - ::= { ospfTrapControl 2 } - - - ospfPacketType OBJECT-TYPE - SYNTAX INTEGER { - hello (1), - dbDescript (2), - lsReq (3), - lsUpdate (4), - lsAck (5) } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "OSPF packet types." - ::= { ospfTrapControl 3 } - - - ospfPacketSrc OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address of an inbound packet that can- - not be identified by a neighbor instance." - ::= { ospfTrapControl 4 } - - --- Traps - - - ospfIfStateChange NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfIfIpAddress, - ospfAddressLessIf, - ospfIfState -- The new state - } - STATUS current - DESCRIPTION - "An ospfIfStateChange trap signifies that there - has been a change in the state of a non-virtual - OSPF interface. This trap should be generated - when the interface state regresses (e.g., goes - from Dr to Down) or progresses to a terminal - state (i.e., Point-to-Point, DR Other, Dr, or - Backup)." - ::= { ospfTraps 16 } - - - ospfVirtIfStateChange NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfVirtIfAreaId, - ospfVirtIfNeighbor, - ospfVirtIfState -- The new state - } - STATUS current - DESCRIPTION - "An ospfIfStateChange trap signifies that there - has been a change in the state of an OSPF vir- - tual interface. - This trap should be generated when the inter- - face state regresses (e.g., goes from Point- - to-Point to Down) or progresses to a terminal - state (i.e., Point-to-Point)." - ::= { ospfTraps 1 } - - - ospfNbrStateChange NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfNbrIpAddr, - ospfNbrAddressLessIndex, - ospfNbrRtrId, - ospfNbrState -- The new state - } - STATUS current - DESCRIPTION - "An ospfNbrStateChange trap signifies that - there has been a change in the state of a non- - virtual OSPF neighbor. This trap should be - generated when the neighbor state regresses - (e.g., goes from Attempt or Full to 1-Way or - Down) or progresses to a terminal state (e.g., - 2-Way or Full). When an neighbor transitions - from or to Full on non-broadcast multi-access - and broadcast networks, the trap should be gen- - erated by the designated router. A designated - router transitioning to Down will be noted by - ospfIfStateChange." - ::= { ospfTraps 2 } - - - ospfVirtNbrStateChange NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfVirtNbrArea, - ospfVirtNbrRtrId, - ospfVirtNbrState -- The new state - } - STATUS current - DESCRIPTION - "An ospfIfStateChange trap signifies that there - has been a change in the state of an OSPF vir- - tual neighbor. This trap should be generated - when the neighbor state regresses (e.g., goes - from Attempt or Full to 1-Way or Down) or - progresses to a terminal state (e.g., Full)." - ::= { ospfTraps 3 } - ospfIfConfigError NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfIfIpAddress, - ospfAddressLessIf, - ospfPacketSrc, -- The source IP address - ospfConfigErrorType, -- Type of error - ospfPacketType - } - STATUS current - DESCRIPTION - "An ospfIfConfigError trap signifies that a - packet has been received on a non-virtual in- - terface from a router whose configuration - parameters conflict with this router's confi- - guration parameters. Note that the event op- - tionMismatch should cause a trap only if it - prevents an adjacency from forming." - ::= { ospfTraps 4 } - - - ospfVirtIfConfigError NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfVirtIfAreaId, - ospfVirtIfNeighbor, - ospfConfigErrorType, -- Type of error - ospfPacketType - } - STATUS current - DESCRIPTION - "An ospfConfigError trap signifies that a pack- - et has been received on a virtual interface - from a router whose configuration parameters - conflict with this router's configuration - parameters. Note that the event optionMismatch - should cause a trap only if it prevents an ad- - jacency from forming." - ::= { ospfTraps 5 } - - - ospfIfAuthFailure NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfIfIpAddress, - ospfAddressLessIf, - ospfPacketSrc, -- The source IP address - ospfConfigErrorType, -- authTypeMismatch or - -- authFailure - ospfPacketType - } - STATUS current - DESCRIPTION - "An ospfIfAuthFailure trap signifies that a - packet has been received on a non-virtual in- - terface from a router whose authentication key - or authentication type conflicts with this - router's authentication key or authentication - type." - ::= { ospfTraps 6 } - - - ospfVirtIfAuthFailure NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfVirtIfAreaId, - ospfVirtIfNeighbor, - ospfConfigErrorType, -- authTypeMismatch or - -- authFailure - ospfPacketType - } - STATUS current - DESCRIPTION - "An ospfVirtIfAuthFailure trap signifies that a - packet has been received on a virtual interface - from a router whose authentication key or au- - thentication type conflicts with this router's - authentication key or authentication type." - ::= { ospfTraps 7 } - - - ospfIfRxBadPacket NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfIfIpAddress, - ospfAddressLessIf, - ospfPacketSrc, -- The source IP address - ospfPacketType - } - STATUS current - DESCRIPTION - "An ospfIfRxBadPacket trap signifies that an - OSPF packet has been received on a non-virtual - interface that cannot be parsed." - ::= { ospfTraps 8 } - - ospfVirtIfRxBadPacket NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfVirtIfAreaId, - ospfVirtIfNeighbor, - ospfPacketType - } - STATUS current - DESCRIPTION - "An ospfRxBadPacket trap signifies that an OSPF - packet has been received on a virtual interface - that cannot be parsed." - ::= { ospfTraps 9 } - - - ospfTxRetransmit NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfIfIpAddress, - ospfAddressLessIf, - ospfNbrRtrId, -- Destination - ospfPacketType, - ospfLsdbType, - ospfLsdbLsid, - ospfLsdbRouterId - } - STATUS current - DESCRIPTION - "An ospfTxRetransmit trap signifies than an - OSPF packet has been retransmitted on a non- - virtual interface. All packets that may be re- - transmitted are associated with an LSDB entry. - The LS type, LS ID, and Router ID are used to - identify the LSDB entry." - ::= { ospfTraps 10 } - - - ospfVirtIfTxRetransmit NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfVirtIfAreaId, - ospfVirtIfNeighbor, - ospfPacketType, - ospfLsdbType, - ospfLsdbLsid, - ospfLsdbRouterId - } - STATUS current - DESCRIPTION - "An ospfTxRetransmit trap signifies than an - OSPF packet has been retransmitted on a virtual - interface. All packets that may be retransmit- - ted are associated with an LSDB entry. The LS - type, LS ID, and Router ID are used to identify - the LSDB entry." - ::= { ospfTraps 11 } - - - ospfOriginateLsa NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfLsdbAreaId, -- 0.0.0.0 for AS Externals - ospfLsdbType, - ospfLsdbLsid, - ospfLsdbRouterId - } - STATUS current - DESCRIPTION - "An ospfOriginateLsa trap signifies that a new - LSA has been originated by this router. This - trap should not be invoked for simple refreshes - of LSAs (which happesn every 30 minutes), but - instead will only be invoked when an LSA is - (re)originated due to a topology change. Addi- - tionally, this trap does not include LSAs that - are being flushed because they have reached - MaxAge." - ::= { ospfTraps 12 } - - - ospfMaxAgeLsa NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfLsdbAreaId, -- 0.0.0.0 for AS Externals - ospfLsdbType, - ospfLsdbLsid, - ospfLsdbRouterId - } - STATUS current - DESCRIPTION - "An ospfMaxAgeLsa trap signifies that one of - the LSA in the router's link-state database has - aged to MaxAge." - ::= { ospfTraps 13 } - - - ospfLsdbOverflow NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfExtLsdbLimit - } - STATUS current - DESCRIPTION - "An ospfLsdbOverflow trap signifies that the - number of LSAs in the router's link-state data- - base has exceeded ospfExtLsdbLimit." - ::= { ospfTraps 14 } - - - ospfLsdbApproachingOverflow NOTIFICATION-TYPE - OBJECTS { - ospfRouterId, -- The originator of the trap - ospfExtLsdbLimit - } - STATUS current - DESCRIPTION - "An ospfLsdbApproachingOverflow trap signifies - that the number of LSAs in the router's link- - state database has exceeded ninety percent of - ospfExtLsdbLimit." - ::= { ospfTraps 15 } - - --- conformance information - -ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 } - -ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 } -ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 } - --- compliance statements - - ospfTrapCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement " - MODULE -- this module - MANDATORY-GROUPS { ospfTrapControlGroup } - - - GROUP ospfTrapControlGroup - DESCRIPTION - "This group is optional but recommended for all - OSPF systems" - ::= { ospfTrapCompliances 1 } - - --- units of conformance - - ospfTrapControlGroup OBJECT-GROUP - OBJECTS { - ospfSetTrap, - ospfConfigErrorType, - ospfPacketType, - ospfPacketSrc - } - STATUS current - DESCRIPTION - "These objects are required to control traps - from OSPF systems." - ::= { ospfTrapGroups 1 } - - -END |