diff options
Diffstat (limited to 'mibs/RFC1213-MIB.txt')
| -rw-r--r-- | mibs/RFC1213-MIB.txt | 2613 |
1 files changed, 0 insertions, 2613 deletions
diff --git a/mibs/RFC1213-MIB.txt b/mibs/RFC1213-MIB.txt deleted file mode 100644 index 408ccd79..00000000 --- a/mibs/RFC1213-MIB.txt +++ /dev/null @@ -1,2613 +0,0 @@ -RFC1213-MIB DEFINITIONS ::= BEGIN - -IMPORTS - mgmt, NetworkAddress, IpAddress, Counter, Gauge, - TimeTicks - FROM RFC1155-SMI - OBJECT-TYPE - FROM RFC-1212; - --- This MIB module uses the extended OBJECT-TYPE macro as --- defined in [14]; - --- MIB-II (same prefix as MIB-I) - -mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } - --- textual conventions - -DisplayString ::= - OCTET STRING --- This data type is used to model textual information taken --- from the NVT ASCII character set. By convention, objects --- with this syntax are declared as having - --- --- SIZE (0..255) - -PhysAddress ::= - OCTET STRING --- This data type is used to model media addresses. For many --- types of media, this will be in a binary representation. --- For example, an ethernet address would be represented as --- a string of 6 octets. - --- groups in MIB-II - -system OBJECT IDENTIFIER ::= { mib-2 1 } - -interfaces OBJECT IDENTIFIER ::= { mib-2 2 } - -at OBJECT IDENTIFIER ::= { mib-2 3 } - -ip OBJECT IDENTIFIER ::= { mib-2 4 } - -icmp OBJECT IDENTIFIER ::= { mib-2 5 } - -tcp OBJECT IDENTIFIER ::= { mib-2 6 } - -udp OBJECT IDENTIFIER ::= { mib-2 7 } - -egp OBJECT IDENTIFIER ::= { mib-2 8 } - --- historical (some say hysterical) --- cmot OBJECT IDENTIFIER ::= { mib-2 9 } - -transmission OBJECT IDENTIFIER ::= { mib-2 10 } - -snmp OBJECT IDENTIFIER ::= { mib-2 11 } - --- the System group - --- Implementation of the System group is mandatory for all --- systems. If an agent is not configured to have a value --- for any of these variables, a string of length 0 is --- returned. - -sysDescr OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A textual description of the entity. This value - should include the full name and version - identification of the system's hardware type, - software operating-system, and networking - software. It is mandatory that this only contain - printable ASCII characters." - ::= { system 1 } - -sysObjectID OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The vendor's authoritative identification of the - network management subsystem contained in the - entity. This value is allocated within the SMI - enterprises subtree (1.3.6.1.4.1) and provides an - easy and unambiguous means for determining `what - kind of box' is being managed. For example, if - vendor `Flintstones, Inc.' was assigned the - subtree 1.3.6.1.4.1.4242, it could assign the - identifier 1.3.6.1.4.1.4242.1.1 to its `Fred - Router'." - ::= { system 2 } - -sysUpTime OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The time (in hundredths of a second) since the - network management portion of the system was last - re-initialized." - ::= { system 3 } - -sysContact OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The textual identification of the contact person - for this managed node, together with information - on how to contact this person." - ::= { system 4 } - -sysName OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "An administratively-assigned name for this - managed node. By convention, this is the node's - fully-qualified domain name." - ::= { system 5 } - -sysLocation OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The physical location of this node (e.g., - `telephone closet, 3rd floor')." - ::= { system 6 } - -sysServices OBJECT-TYPE - SYNTAX INTEGER (0..127) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A value which indicates the set of services that - this entity primarily offers. - - The value is a sum. This sum initially takes the - value zero, Then, for each layer, L, in the range - 1 through 7, that this node performs transactions - for, 2 raised to (L - 1) is added to the sum. For - example, a node which performs primarily routing - functions would have a value of 4 (2^(3-1)). In - contrast, a node which is a host offering - application services would have a value of 72 - (2^(4-1) + 2^(7-1)). Note that in the context of - the Internet suite of protocols, values should be - calculated accordingly: - - layer functionality - 1 physical (e.g., repeaters) - 2 datalink/subnetwork (e.g., bridges) - 3 internet (e.g., IP gateways) - 4 end-to-end (e.g., IP hosts) - 7 applications (e.g., mail relays) - - For systems including OSI protocols, layers 5 and - 6 may also be counted." - ::= { system 7 } - --- the Interfaces group - --- Implementation of the Interfaces group is mandatory for --- all systems. - -ifNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of network interfaces (regardless of - their current state) present on this system." - ::= { interfaces 1 } - --- the Interfaces table - --- The Interfaces table contains information on the entity's --- interfaces. Each interface is thought of as being --- attached to a `subnetwork'. Note that this term should --- not be confused with `subnet' which refers to an --- addressing partitioning scheme used in the Internet suite --- of protocols. - -ifTable OBJECT-TYPE - SYNTAX SEQUENCE OF IfEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of interface entries. The number of - entries is given by the value of ifNumber." - ::= { interfaces 2 } - -ifEntry OBJECT-TYPE - SYNTAX IfEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "An interface entry containing objects at the - subnetwork layer and below for a particular - interface." - INDEX { ifIndex } - ::= { ifTable 1 } - -IfEntry ::= - SEQUENCE { - ifIndex - INTEGER, - ifDescr - DisplayString, - ifType - INTEGER, - ifMtu - INTEGER, - ifSpeed - Gauge, - ifPhysAddress - PhysAddress, - ifAdminStatus - INTEGER, - ifOperStatus - INTEGER, - ifLastChange - TimeTicks, - ifInOctets - Counter, - ifInUcastPkts - Counter, - ifInNUcastPkts - Counter, - ifInDiscards - Counter, - ifInErrors - Counter, - ifInUnknownProtos - Counter, - ifOutOctets - Counter, - ifOutUcastPkts - Counter, - ifOutNUcastPkts - Counter, - ifOutDiscards - Counter, - ifOutErrors - Counter, - ifOutQLen - Gauge, - ifSpecific - OBJECT IDENTIFIER - } - -ifIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A unique value for each interface. Its value - ranges between 1 and the value of ifNumber. The - value for each interface must remain constant at - least from one re-initialization of the entity's - network management system to the next re- - initialization." - ::= { ifEntry 1 } - -ifDescr OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A textual string containing information about the - interface. This string should include the name of - the manufacturer, the product name and the version - of the hardware interface." - ::= { ifEntry 2 } - -ifType OBJECT-TYPE - SYNTAX INTEGER { - other(1), -- none of the following - regular1822(2), - hdh1822(3), - ddn-x25(4), - rfc877-x25(5), - ethernet-csmacd(6), - iso88023-csmacd(7), - iso88024-tokenBus(8), - iso88025-tokenRing(9), - iso88026-man(10), - starLan(11), - proteon-10Mbit(12), - proteon-80Mbit(13), - hyperchannel(14), - fddi(15), - lapb(16), - sdlc(17), - ds1(18), -- T-1 - e1(19), -- european equiv. of T-1 - basicISDN(20), - primaryISDN(21), -- proprietary serial - propPointToPointSerial(22), - ppp(23), - softwareLoopback(24), - eon(25), -- CLNP over IP [11] - ethernet-3Mbit(26), - nsip(27), -- XNS over IP - slip(28), -- generic SLIP - ultra(29), -- ULTRA technologies - ds3(30), -- T-3 - sip(31), -- SMDS - frame-relay(32) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The type of interface, distinguished according to - the physical/link protocol(s) immediately `below' - the network layer in the protocol stack." - ::= { ifEntry 3 } - -ifMtu OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The size of the largest datagram which can be - sent/received on the interface, specified in - octets. For interfaces that are used for - transmitting network datagrams, this is the size - of the largest network datagram that can be sent - on the interface." - ::= { ifEntry 4 } - -ifSpeed OBJECT-TYPE - SYNTAX Gauge - ACCESS read-only - STATUS mandatory - DESCRIPTION - "An estimate of the interface's current bandwidth - in bits per second. For interfaces which do not - vary in bandwidth or for those where no accurate - estimation can be made, this object should contain - the nominal bandwidth." - ::= { ifEntry 5 } - -ifPhysAddress OBJECT-TYPE - SYNTAX PhysAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The interface's address at the protocol layer - immediately `below' the network layer in the - protocol stack. For interfaces which do not have - - such an address (e.g., a serial line), this object - should contain an octet string of zero length." - ::= { ifEntry 6 } - -ifAdminStatus OBJECT-TYPE - SYNTAX INTEGER { - up(1), -- ready to pass packets - down(2), - testing(3) -- in some test mode - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The desired state of the interface. The - testing(3) state indicates that no operational - packets can be passed." - ::= { ifEntry 7 } - -ifOperStatus OBJECT-TYPE - SYNTAX INTEGER { - up(1), -- ready to pass packets - down(2), - testing(3) -- in some test mode - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current operational state of the interface. - The testing(3) state indicates that no operational - packets can be passed." - ::= { ifEntry 8 } - -ifLastChange OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The value of sysUpTime at the time the interface - entered its current operational state. If the - current state was entered prior to the last re- - initialization of the local network management - subsystem, then this object contains a zero - value." - ::= { ifEntry 9 } - -ifInOctets OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of octets received on the - interface, including framing characters." - ::= { ifEntry 10 } - -ifInUcastPkts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of subnetwork-unicast packets - delivered to a higher-layer protocol." - ::= { ifEntry 11 } - -ifInNUcastPkts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of non-unicast (i.e., subnetwork- - broadcast or subnetwork-multicast) packets - delivered to a higher-layer protocol." - ::= { ifEntry 12 } - -ifInDiscards OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of inbound packets which were chosen - to be discarded even though no errors had been - detected to prevent their being deliverable to a - higher-layer protocol. One possible reason for - discarding such a packet could be to free up - buffer space." - ::= { ifEntry 13 } - -ifInErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of inbound packets that contained - errors preventing them from being deliverable to a - higher-layer protocol." - ::= { ifEntry 14 } - -ifInUnknownProtos OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of packets received via the interface - which were discarded because of an unknown or - unsupported protocol." - ::= { ifEntry 15 } - -ifOutOctets OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of octets transmitted out of the - interface, including framing characters." - ::= { ifEntry 16 } - -ifOutUcastPkts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of packets that higher-level - protocols requested be transmitted to a - subnetwork-unicast address, including those that - were discarded or not sent." - ::= { ifEntry 17 } - -ifOutNUcastPkts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of packets that higher-level - protocols requested be transmitted to a non- - unicast (i.e., a subnetwork-broadcast or - subnetwork-multicast) address, including those - that were discarded or not sent." - ::= { ifEntry 18 } - -ifOutDiscards OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of outbound packets which were chosen - - to be discarded even though no errors had been - detected to prevent their being transmitted. One - possible reason for discarding such a packet could - be to free up buffer space." - ::= { ifEntry 19 } - -ifOutErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of outbound packets that could not be - transmitted because of errors." - ::= { ifEntry 20 } - -ifOutQLen OBJECT-TYPE - SYNTAX Gauge - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The length of the output packet queue (in - packets)." - ::= { ifEntry 21 } - -ifSpecific OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A reference to MIB definitions specific to the - particular media being used to realize the - interface. For example, if the interface is - realized by an ethernet, then the value of this - object refers to a document defining objects - specific to ethernet. If this information is not - present, its value should be set to the OBJECT - IDENTIFIER { 0 0 }, which is a syntatically valid - object identifier, and any conformant - implementation of ASN.1 and BER must be able to - generate and recognize this value." - ::= { ifEntry 22 } - --- the Address Translation group - --- Implementation of the Address Translation group is --- mandatory for all systems. Note however that this group --- is deprecated by MIB-II. That is, it is being included - --- solely for compatibility with MIB-I nodes, and will most --- likely be excluded from MIB-III nodes. From MIB-II and --- onwards, each network protocol group contains its own --- address translation tables. - --- The Address Translation group contains one table which is --- the union across all interfaces of the translation tables --- for converting a NetworkAddress (e.g., an IP address) into --- a subnetwork-specific address. For lack of a better term, --- this document refers to such a subnetwork-specific address --- as a `physical' address. - --- Examples of such translation tables are: for broadcast --- media where ARP is in use, the translation table is --- equivalent to the ARP cache; or, on an X.25 network where --- non-algorithmic translation to X.121 addresses is --- required, the translation table contains the --- NetworkAddress to X.121 address equivalences. - -atTable OBJECT-TYPE - SYNTAX SEQUENCE OF AtEntry - ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "The Address Translation tables contain the - NetworkAddress to `physical' address equivalences. - Some interfaces do not use translation tables for - determining address equivalences (e.g., DDN-X.25 - has an algorithmic method); if all interfaces are - of this type, then the Address Translation table - is empty, i.e., has zero entries." - ::= { at 1 } - -atEntry OBJECT-TYPE - SYNTAX AtEntry - ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "Each entry contains one NetworkAddress to - `physical' address equivalence." - INDEX { atIfIndex, - atNetAddress } - ::= { atTable 1 } - -AtEntry ::= - SEQUENCE { - atIfIndex - INTEGER, - atPhysAddress - PhysAddress, - atNetAddress - NetworkAddress - } - -atIfIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS deprecated - DESCRIPTION - "The interface on which this entry's equivalence - is effective. The interface identified by a - particular value of this index is the same - interface as identified by the same value of - ifIndex." - ::= { atEntry 1 } - -atPhysAddress OBJECT-TYPE - SYNTAX PhysAddress - ACCESS read-write - STATUS deprecated - DESCRIPTION - "The media-dependent `physical' address. - - Setting this object to a null string (one of zero - length) has the effect of invaliding the - corresponding entry in the atTable object. That - is, it effectively dissasociates the interface - identified with said entry from the mapping - identified with said entry. It is an - implementation-specific matter as to whether the - agent removes an invalidated entry from the table. - Accordingly, management stations must be prepared - to receive tabular information from agents that - corresponds to entries not currently in use. - Proper interpretation of such entries requires - examination of the relevant atPhysAddress object." - ::= { atEntry 2 } - -atNetAddress OBJECT-TYPE - SYNTAX NetworkAddress - ACCESS read-write - STATUS deprecated - DESCRIPTION - "The NetworkAddress (e.g., the IP address) - corresponding to the media-dependent `physical' - address." - ::= { atEntry 3 } - --- the IP group - --- Implementation of the IP group is mandatory for all --- systems. - -ipForwarding OBJECT-TYPE - SYNTAX INTEGER { - forwarding(1), -- acting as a gateway - not-forwarding(2) -- NOT acting as a gateway - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The indication of whether this entity is acting - as an IP gateway in respect to the forwarding of - datagrams received by, but not addressed to, this - entity. IP gateways forward datagrams. IP hosts - do not (except those source-routed via the host). - - Note that for some managed nodes, this object may - take on only a subset of the values possible. - Accordingly, it is appropriate for an agent to - return a `badValue' response if a management - station attempts to change this object to an - inappropriate value." - ::= { ip 1 } - -ipDefaultTTL OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The default value inserted into the Time-To-Live - field of the IP header of datagrams originated at - this entity, whenever a TTL value is not supplied - by the transport layer protocol." - ::= { ip 2 } - -ipInReceives OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of input datagrams received from - interfaces, including those received in error." - ::= { ip 3 } - -ipInHdrErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of input datagrams discarded due to - errors in their IP headers, including bad - checksums, version number mismatch, other format - errors, time-to-live exceeded, errors discovered - in processing their IP options, etc." - ::= { ip 4 } - -ipInAddrErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of input datagrams discarded because - the IP address in their IP header's destination - field was not a valid address to be received at - this entity. This count includes invalid - addresses (e.g., 0.0.0.0) and addresses of - unsupported Classes (e.g., Class E). For entities - which are not IP Gateways and therefore do not - forward datagrams, this counter includes datagrams - discarded because the destination address was not - a local address." - ::= { ip 5 } - -ipForwDatagrams OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of input datagrams for which this - entity was not their final IP destination, as a - result of which an attempt was made to find a - route to forward them to that final destination. - In entities which do not act as IP Gateways, this - counter will include only those packets which were - Source-Routed via this entity, and the Source- - Route option processing was successful." - ::= { ip 6 } - -ipInUnknownProtos OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of locally-addressed datagrams - received successfully but discarded because of an - unknown or unsupported protocol." - ::= { ip 7 } - -ipInDiscards OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of input IP datagrams for which no - problems were encountered to prevent their - continued processing, but which were discarded - (e.g., for lack of buffer space). Note that this - counter does not include any datagrams discarded - while awaiting re-assembly." - ::= { ip 8 } - -ipInDelivers OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of input datagrams successfully - delivered to IP user-protocols (including ICMP)." - ::= { ip 9 } - -ipOutRequests OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of IP datagrams which local IP - user-protocols (including ICMP) supplied to IP in - requests for transmission. Note that this counter - does not include any datagrams counted in - ipForwDatagrams." - ::= { ip 10 } - -ipOutDiscards OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of output IP datagrams for which no - - problem was encountered to prevent their - transmission to their destination, but which were - discarded (e.g., for lack of buffer space). Note - that this counter would include datagrams counted - in ipForwDatagrams if any such packets met this - (discretionary) discard criterion." - ::= { ip 11 } - -ipOutNoRoutes OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of IP datagrams discarded because no - route could be found to transmit them to their - destination. Note that this counter includes any - packets counted in ipForwDatagrams which meet this - `no-route' criterion. Note that this includes any - datagarms which a host cannot route because all of - its default gateways are down." - ::= { ip 12 } - -ipReasmTimeout OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The maximum number of seconds which received - fragments are held while they are awaiting - reassembly at this entity." - ::= { ip 13 } - -ipReasmReqds OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of IP fragments received which needed - to be reassembled at this entity." - ::= { ip 14 } - -ipReasmOKs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of IP datagrams successfully re- - assembled." - ::= { ip 15 } - -ipReasmFails OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of failures detected by the IP re- - assembly algorithm (for whatever reason: timed - out, errors, etc). Note that this is not - necessarily a count of discarded IP fragments - since some algorithms (notably the algorithm in - RFC 815) can lose track of the number of fragments - by combining them as they are received." - ::= { ip 16 } - -ipFragOKs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of IP datagrams that have been - successfully fragmented at this entity." - ::= { ip 17 } - -ipFragFails OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of IP datagrams that have been - discarded because they needed to be fragmented at - this entity but could not be, e.g., because their - Don't Fragment flag was set." - ::= { ip 18 } - -ipFragCreates OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of IP datagram fragments that have - been generated as a result of fragmentation at - this entity." - ::= { ip 19 } - --- the IP address table - --- The IP address table contains this entity's IP addressing --- information. - -ipAddrTable OBJECT-TYPE - SYNTAX SEQUENCE OF IpAddrEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The table of addressing information relevant to - this entity's IP addresses." - ::= { ip 20 } - -ipAddrEntry OBJECT-TYPE - SYNTAX IpAddrEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The addressing information for one of this - entity's IP addresses." - INDEX { ipAdEntAddr } - ::= { ipAddrTable 1 } - -IpAddrEntry ::= - SEQUENCE { - ipAdEntAddr - IpAddress, - ipAdEntIfIndex - INTEGER, - ipAdEntNetMask - IpAddress, - ipAdEntBcastAddr - INTEGER, - ipAdEntReasmMaxSize - INTEGER (0..65535) - } - -ipAdEntAddr OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The IP address to which this entry's addressing - information pertains." - ::= { ipAddrEntry 1 } - -ipAdEntIfIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The index value which uniquely identifies the - interface to which this entry is applicable. The - interface identified by a particular value of this - index is the same interface as identified by the - same value of ifIndex." - ::= { ipAddrEntry 2 } - -ipAdEntNetMask OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The subnet mask associated with the IP address of - this entry. The value of the mask is an IP - address with all the network bits set to 1 and all - the hosts bits set to 0." - ::= { ipAddrEntry 3 } - -ipAdEntBcastAddr OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The value of the least-significant bit in the IP - broadcast address used for sending datagrams on - the (logical) interface associated with the IP - address of this entry. For example, when the - Internet standard all-ones broadcast address is - used, the value will be 1. This value applies to - both the subnet and network broadcasts addresses - used by the entity on this (logical) interface." - ::= { ipAddrEntry 4 } - -ipAdEntReasmMaxSize OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The size of the largest IP datagram which this - entity can re-assemble from incoming IP fragmented - datagrams received on this interface." - ::= { ipAddrEntry 5 } - --- the IP routing table - --- The IP routing table contains an entry for each route --- presently known to this entity. - -ipRouteTable OBJECT-TYPE - SYNTAX SEQUENCE OF IpRouteEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "This entity's IP Routing table." - ::= { ip 21 } - -ipRouteEntry OBJECT-TYPE - SYNTAX IpRouteEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A route to a particular destination." - INDEX { ipRouteDest } - ::= { ipRouteTable 1 } - -IpRouteEntry ::= - SEQUENCE { - ipRouteDest - IpAddress, - ipRouteIfIndex - INTEGER, - ipRouteMetric1 - INTEGER, - ipRouteMetric2 - INTEGER, - ipRouteMetric3 - INTEGER, - ipRouteMetric4 - INTEGER, - ipRouteNextHop - IpAddress, - ipRouteType - INTEGER, - ipRouteProto - INTEGER, - ipRouteAge - INTEGER, - ipRouteMask - IpAddress, - ipRouteMetric5 - INTEGER, - ipRouteInfo - OBJECT IDENTIFIER - } - -ipRouteDest OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The destination IP address of this route. An - entry with a value of 0.0.0.0 is considered a - default route. Multiple routes to a single - destination can appear in the table, but access to - such multiple entries is dependent on the table- - access mechanisms defined by the network - management protocol in use." - ::= { ipRouteEntry 1 } - -ipRouteIfIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The index value which uniquely identifies the - local interface through which the next hop of this - route should be reached. The interface identified - by a particular value of this index is the same - interface as identified by the same value of - ifIndex." - ::= { ipRouteEntry 2 } - -ipRouteMetric1 OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The primary routing metric for this route. The - semantics of this metric are determined by the - routing-protocol specified in the route's - ipRouteProto value. If this metric is not used, - its value should be set to -1." - ::= { ipRouteEntry 3 } - -ipRouteMetric2 OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "An alternate routing metric for this route. The - semantics of this metric are determined by the - routing-protocol specified in the route's - ipRouteProto value. If this metric is not used, - its value should be set to -1." - ::= { ipRouteEntry 4 } - -ipRouteMetric3 OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "An alternate routing metric for this route. The - semantics of this metric are determined by the - routing-protocol specified in the route's - ipRouteProto value. If this metric is not used, - its value should be set to -1." - ::= { ipRouteEntry 5 } - -ipRouteMetric4 OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "An alternate routing metric for this route. The - semantics of this metric are determined by the - routing-protocol specified in the route's - ipRouteProto value. If this metric is not used, - its value should be set to -1." - ::= { ipRouteEntry 6 } - -ipRouteNextHop OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The IP address of the next hop of this route. - (In the case of a route bound to an interface - which is realized via a broadcast media, the value - of this field is the agent's IP address on that - interface.)" - ::= { ipRouteEntry 7 } - -ipRouteType OBJECT-TYPE - SYNTAX INTEGER { - other(1), -- none of the following - - invalid(2), -- an invalidated route - - -- route to directly - direct(3), -- connected (sub-)network - - -- route to a non-local - indirect(4) -- host/network/sub-network - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The type of route. Note that the values - direct(3) and indirect(4) refer to the notion of - direct and indirect routing in the IP - architecture. - - Setting this object to the value invalid(2) has - the effect of invalidating the corresponding entry - in the ipRouteTable object. That is, it - effectively dissasociates the destination - identified with said entry from the route - identified with said entry. It is an - implementation-specific matter as to whether the - agent removes an invalidated entry from the table. - Accordingly, management stations must be prepared - to receive tabular information from agents that - corresponds to entries not currently in use. - Proper interpretation of such entries requires - examination of the relevant ipRouteType object." - ::= { ipRouteEntry 8 } - -ipRouteProto OBJECT-TYPE - SYNTAX INTEGER { - other(1), -- none of the following - - -- non-protocol information, - -- e.g., manually configured - local(2), -- entries - - -- set via a network - netmgmt(3), -- management protocol - - -- obtained via ICMP, - icmp(4), -- e.g., Redirect - - -- the remaining values are - -- all gateway routing - -- protocols - egp(5), - ggp(6), - hello(7), - rip(8), - is-is(9), - es-is(10), - ciscoIgrp(11), - bbnSpfIgp(12), - ospf(13), - bgp(14) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The routing mechanism via which this route was - learned. Inclusion of values for gateway routing - protocols is not intended to imply that hosts - should support those protocols." - ::= { ipRouteEntry 9 } - -ipRouteAge OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The number of seconds since this route was last - updated or otherwise determined to be correct. - Note that no semantics of `too old' can be implied - except through knowledge of the routing protocol - by which the route was learned." - ::= { ipRouteEntry 10 } - -ipRouteMask OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Indicate the mask to be logical-ANDed with the - destination address before being compared to the - value in the ipRouteDest field. For those systems - that do not support arbitrary subnet masks, an - agent constructs the value of the ipRouteMask by - determining whether the value of the correspondent - ipRouteDest field belong to a class-A, B, or C - network, and then using one of: - - mask network - 255.0.0.0 class-A - 255.255.0.0 class-B - 255.255.255.0 class-C - - If the value of the ipRouteDest is 0.0.0.0 (a - default route), then the mask value is also - 0.0.0.0. It should be noted that all IP routing - subsystems implicitly use this mechanism." - ::= { ipRouteEntry 11 } - -ipRouteMetric5 OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "An alternate routing metric for this route. The - semantics of this metric are determined by the - routing-protocol specified in the route's - ipRouteProto value. If this metric is not used, - its value should be set to -1." - ::= { ipRouteEntry 12 } - -ipRouteInfo OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A reference to MIB definitions specific to the - particular routing protocol which is responsible - for this route, as determined by the value - specified in the route's ipRouteProto value. If - this information is not present, its value should - be set to the OBJECT IDENTIFIER { 0 0 }, which is - a syntatically valid object identifier, and any - conformant implementation of ASN.1 and BER must be - able to generate and recognize this value." - ::= { ipRouteEntry 13 } - --- the IP Address Translation table - --- The IP address translation table contain the IpAddress to --- `physical' address equivalences. Some interfaces do not --- use translation tables for determining address --- equivalences (e.g., DDN-X.25 has an algorithmic method); --- if all interfaces are of this type, then the Address --- Translation table is empty, i.e., has zero entries. - -ipNetToMediaTable OBJECT-TYPE - SYNTAX SEQUENCE OF IpNetToMediaEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The IP Address Translation table used for mapping - from IP addresses to physical addresses." - ::= { ip 22 } - -ipNetToMediaEntry OBJECT-TYPE - SYNTAX IpNetToMediaEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Each entry contains one IpAddress to `physical' - address equivalence." - INDEX { ipNetToMediaIfIndex, - ipNetToMediaNetAddress } - ::= { ipNetToMediaTable 1 } - -IpNetToMediaEntry ::= - SEQUENCE { - ipNetToMediaIfIndex - INTEGER, - ipNetToMediaPhysAddress - PhysAddress, - ipNetToMediaNetAddress - IpAddress, - ipNetToMediaType - INTEGER - } - -ipNetToMediaIfIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The interface on which this entry's equivalence - is effective. The interface identified by a - particular value of this index is the same - interface as identified by the same value of - ifIndex." - ::= { ipNetToMediaEntry 1 } - -ipNetToMediaPhysAddress OBJECT-TYPE - SYNTAX PhysAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The media-dependent `physical' address." - ::= { ipNetToMediaEntry 2 } - -ipNetToMediaNetAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The IpAddress corresponding to the media- - dependent `physical' address." - ::= { ipNetToMediaEntry 3 } - -ipNetToMediaType OBJECT-TYPE - SYNTAX INTEGER { - other(1), -- none of the following - invalid(2), -- an invalidated mapping - dynamic(3), - static(4) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The type of mapping. - - Setting this object to the value invalid(2) has - the effect of invalidating the corresponding entry - in the ipNetToMediaTable. That is, it effectively - dissasociates the interface identified with said - entry from the mapping identified with said entry. - It is an implementation-specific matter as to - whether the agent removes an invalidated entry - from the table. Accordingly, management stations - must be prepared to receive tabular information - from agents that corresponds to entries not - currently in use. Proper interpretation of such - entries requires examination of the relevant - ipNetToMediaType object." - ::= { ipNetToMediaEntry 4 } - --- additional IP objects - -ipRoutingDiscards OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of routing entries which were chosen - to be discarded even though they are valid. One - possible reason for discarding such an entry could - be to free-up buffer space for other routing - - entries." - ::= { ip 23 } - --- the ICMP group - --- Implementation of the ICMP group is mandatory for all --- systems. - -icmpInMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of ICMP messages which the - entity received. Note that this counter includes - all those counted by icmpInErrors." - ::= { icmp 1 } - -icmpInErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP messages which the entity - received but determined as having ICMP-specific - errors (bad ICMP checksums, bad length, etc.)." - ::= { icmp 2 } - -icmpInDestUnreachs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Destination Unreachable - messages received." - ::= { icmp 3 } - -icmpInTimeExcds OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Time Exceeded messages - received." - ::= { icmp 4 } - -icmpInParmProbs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Parameter Problem messages - received." - ::= { icmp 5 } - -icmpInSrcQuenchs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Source Quench messages - received." - ::= { icmp 6 } - -icmpInRedirects OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Redirect messages received." - ::= { icmp 7 } - -icmpInEchos OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Echo (request) messages - received." - ::= { icmp 8 } - -icmpInEchoReps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Echo Reply messages received." - ::= { icmp 9 } - -icmpInTimestamps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Timestamp (request) messages - received." - ::= { icmp 10 } - -icmpInTimestampReps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Timestamp Reply messages - received." - ::= { icmp 11 } - -icmpInAddrMasks OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Address Mask Request messages - received." - ::= { icmp 12 } - -icmpInAddrMaskReps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Address Mask Reply messages - received." - ::= { icmp 13 } - -icmpOutMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of ICMP messages which this - entity attempted to send. Note that this counter - includes all those counted by icmpOutErrors." - ::= { icmp 14 } - -icmpOutErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP messages which this entity did - not send due to problems discovered within ICMP - - such as a lack of buffers. This value should not - include errors discovered outside the ICMP layer - such as the inability of IP to route the resultant - datagram. In some implementations there may be no - types of error which contribute to this counter's - value." - ::= { icmp 15 } - -icmpOutDestUnreachs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Destination Unreachable - messages sent." - ::= { icmp 16 } - -icmpOutTimeExcds OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Time Exceeded messages sent." - ::= { icmp 17 } - -icmpOutParmProbs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Parameter Problem messages - sent." - ::= { icmp 18 } - -icmpOutSrcQuenchs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Source Quench messages sent." - ::= { icmp 19 } - -icmpOutRedirects OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Redirect messages sent. For a - - host, this object will always be zero, since hosts - do not send redirects." - ::= { icmp 20 } - -icmpOutEchos OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Echo (request) messages sent." - ::= { icmp 21 } - -icmpOutEchoReps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Echo Reply messages sent." - ::= { icmp 22 } - -icmpOutTimestamps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Timestamp (request) messages - sent." - ::= { icmp 23 } - -icmpOutTimestampReps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Timestamp Reply messages - sent." - ::= { icmp 24 } - -icmpOutAddrMasks OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Address Mask Request messages - sent." - ::= { icmp 25 } - -icmpOutAddrMaskReps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of ICMP Address Mask Reply messages - sent." - ::= { icmp 26 } - --- the TCP group - --- Implementation of the TCP group is mandatory for all --- systems that implement the TCP. - --- Note that instances of object types that represent --- information about a particular TCP connection are --- transient; they persist only as long as the connection --- in question. - -tcpRtoAlgorithm OBJECT-TYPE - SYNTAX INTEGER { - other(1), -- none of the following - - constant(2), -- a constant rto - rsre(3), -- MIL-STD-1778, Appendix B - vanj(4) -- Van Jacobson's algorithm [10] - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The algorithm used to determine the timeout value - used for retransmitting unacknowledged octets." - ::= { tcp 1 } - -tcpRtoMin OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The minimum value permitted by a TCP - implementation for the retransmission timeout, - measured in milliseconds. More refined semantics - for objects of this type depend upon the algorithm - used to determine the retransmission timeout. In - particular, when the timeout algorithm is rsre(3), - an object of this type has the semantics of the - LBOUND quantity described in RFC 793." - ::= { tcp 2 } - -tcpRtoMax OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The maximum value permitted by a TCP - implementation for the retransmission timeout, - measured in milliseconds. More refined semantics - for objects of this type depend upon the algorithm - used to determine the retransmission timeout. In - particular, when the timeout algorithm is rsre(3), - an object of this type has the semantics of the - UBOUND quantity described in RFC 793." - ::= { tcp 3 } - -tcpMaxConn OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The limit on the total number of TCP connections - the entity can support. In entities where the - maximum number of connections is dynamic, this - object should contain the value -1." - ::= { tcp 4 } - -tcpActiveOpens OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of times TCP connections have made a - direct transition to the SYN-SENT state from the - CLOSED state." - ::= { tcp 5 } - -tcpPassiveOpens OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of times TCP connections have made a - direct transition to the SYN-RCVD state from the - LISTEN state." - ::= { tcp 6 } - -tcpAttemptFails OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of times TCP connections have made a - direct transition to the CLOSED state from either - the SYN-SENT state or the SYN-RCVD state, plus the - number of times TCP connections have made a direct - transition to the LISTEN state from the SYN-RCVD - state." - ::= { tcp 7 } - -tcpEstabResets OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of times TCP connections have made a - direct transition to the CLOSED state from either - the ESTABLISHED state or the CLOSE-WAIT state." - ::= { tcp 8 } - -tcpCurrEstab OBJECT-TYPE - SYNTAX Gauge - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of TCP connections for which the - current state is either ESTABLISHED or CLOSE- - WAIT." - ::= { tcp 9 } - -tcpInSegs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of segments received, including - those received in error. This count includes - segments received on currently established - connections." - ::= { tcp 10 } - -tcpOutSegs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of segments sent, including - those on current connections but excluding those - containing only retransmitted octets." - ::= { tcp 11 } - -tcpRetransSegs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of segments retransmitted - that - is, the number of TCP segments transmitted - containing one or more previously transmitted - octets." - ::= { tcp 12 } - --- the TCP Connection table - --- The TCP connection table contains information about this --- entity's existing TCP connections. - -tcpConnTable OBJECT-TYPE - SYNTAX SEQUENCE OF TcpConnEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table containing TCP connection-specific - information." - ::= { tcp 13 } - -tcpConnEntry OBJECT-TYPE - SYNTAX TcpConnEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Information about a particular current TCP - connection. An object of this type is transient, - in that it ceases to exist when (or soon after) - the connection makes the transition to the CLOSED - state." - INDEX { tcpConnLocalAddress, - tcpConnLocalPort, - tcpConnRemAddress, - tcpConnRemPort } - ::= { tcpConnTable 1 } - -TcpConnEntry ::= - SEQUENCE { - tcpConnState - INTEGER, - tcpConnLocalAddress - IpAddress, - tcpConnLocalPort - INTEGER (0..65535), - tcpConnRemAddress - IpAddress, - tcpConnRemPort - INTEGER (0..65535) - } - -tcpConnState OBJECT-TYPE - SYNTAX INTEGER { - closed(1), - listen(2), - synSent(3), - synReceived(4), - established(5), - finWait1(6), - finWait2(7), - closeWait(8), - lastAck(9), - closing(10), - timeWait(11), - deleteTCB(12) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The state of this TCP connection. - - The only value which may be set by a management - station is deleteTCB(12). Accordingly, it is - appropriate for an agent to return a `badValue' - response if a management station attempts to set - this object to any other value. - - If a management station sets this object to the - value deleteTCB(12), then this has the effect of - deleting the TCB (as defined in RFC 793) of the - corresponding connection on the managed node, - resulting in immediate termination of the - connection. - - As an implementation-specific option, a RST - - segment may be sent from the managed node to the - other TCP endpoint (note however that RST segments - are not sent reliably)." - ::= { tcpConnEntry 1 } - -tcpConnLocalAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The local IP address for this TCP connection. In - the case of a connection in the listen state which - is willing to accept connections for any IP - interface associated with the node, the value - 0.0.0.0 is used." - ::= { tcpConnEntry 2 } - -tcpConnLocalPort OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The local port number for this TCP connection." - ::= { tcpConnEntry 3 } - -tcpConnRemAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The remote IP address for this TCP connection." - ::= { tcpConnEntry 4 } - -tcpConnRemPort OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The remote port number for this TCP connection." - ::= { tcpConnEntry 5 } - --- additional TCP objects - -tcpInErrs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of segments received in error - (e.g., bad TCP checksums)." - ::= { tcp 14 } - -tcpOutRsts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of TCP segments sent containing the - RST flag." - ::= { tcp 15 } - --- the UDP group - --- Implementation of the UDP group is mandatory for all --- systems which implement the UDP. - -udpInDatagrams OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of UDP datagrams delivered to - UDP users." - ::= { udp 1 } - -udpNoPorts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of received UDP datagrams for - which there was no application at the destination - port." - ::= { udp 2 } - -udpInErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of received UDP datagrams that could - not be delivered for reasons other than the lack - of an application at the destination port." - ::= { udp 3 } - -udpOutDatagrams OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of UDP datagrams sent from this - entity." - ::= { udp 4 } - --- the UDP Listener table - --- The UDP listener table contains information about this --- entity's UDP end-points on which a local application is --- currently accepting datagrams. - -udpTable OBJECT-TYPE - SYNTAX SEQUENCE OF UdpEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table containing UDP listener information." - ::= { udp 5 } - -udpEntry OBJECT-TYPE - SYNTAX UdpEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Information about a particular current UDP - listener." - INDEX { udpLocalAddress, udpLocalPort } - ::= { udpTable 1 } - -UdpEntry ::= - SEQUENCE { - udpLocalAddress - IpAddress, - udpLocalPort - INTEGER (0..65535) - } - -udpLocalAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The local IP address for this UDP listener. In - - the case of a UDP listener which is willing to - accept datagrams for any IP interface associated - with the node, the value 0.0.0.0 is used." - ::= { udpEntry 1 } - -udpLocalPort OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The local port number for this UDP listener." - ::= { udpEntry 2 } - --- the EGP group - --- Implementation of the EGP group is mandatory for all --- systems which implement the EGP. - -egpInMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP messages received without - error." - ::= { egp 1 } - -egpInErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP messages received that proved - to be in error." - ::= { egp 2 } - -egpOutMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of locally generated EGP - messages." - ::= { egp 3 } - -egpOutErrors OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of locally generated EGP messages not - sent due to resource limitations within an EGP - entity." - ::= { egp 4 } - --- the EGP Neighbor table - --- The EGP neighbor table contains information about this --- entity's EGP neighbors. - -egpNeighTable OBJECT-TYPE - SYNTAX SEQUENCE OF EgpNeighEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The EGP neighbor table." - ::= { egp 5 } - -egpNeighEntry OBJECT-TYPE - SYNTAX EgpNeighEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Information about this entity's relationship with - a particular EGP neighbor." - INDEX { egpNeighAddr } - ::= { egpNeighTable 1 } - -EgpNeighEntry ::= - SEQUENCE { - egpNeighState - INTEGER, - egpNeighAddr - IpAddress, - egpNeighAs - INTEGER, - egpNeighInMsgs - Counter, - egpNeighInErrs - Counter, - egpNeighOutMsgs - Counter, - egpNeighOutErrs - Counter, - egpNeighInErrMsgs - Counter, - egpNeighOutErrMsgs - Counter, - egpNeighStateUps - Counter, - egpNeighStateDowns - Counter, - egpNeighIntervalHello - INTEGER, - egpNeighIntervalPoll - INTEGER, - egpNeighMode - INTEGER, - egpNeighEventTrigger - INTEGER - } - -egpNeighState OBJECT-TYPE - SYNTAX INTEGER { - idle(1), - acquisition(2), - down(3), - up(4), - cease(5) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The EGP state of the local system with respect to - this entry's EGP neighbor. Each EGP state is - represented by a value that is one greater than - the numerical value associated with said state in - RFC 904." - ::= { egpNeighEntry 1 } - -egpNeighAddr OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The IP address of this entry's EGP neighbor." - ::= { egpNeighEntry 2 } - -egpNeighAs OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The autonomous system of this EGP peer. Zero - should be specified if the autonomous system - number of the neighbor is not yet known." - ::= { egpNeighEntry 3 } - -egpNeighInMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP messages received without error - from this EGP peer." - ::= { egpNeighEntry 4 } - -egpNeighInErrs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP messages received from this EGP - peer that proved to be in error (e.g., bad EGP - checksum)." - ::= { egpNeighEntry 5 } - -egpNeighOutMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of locally generated EGP messages to - this EGP peer." - ::= { egpNeighEntry 6 } - -egpNeighOutErrs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of locally generated EGP messages not - sent to this EGP peer due to resource limitations - within an EGP entity." - ::= { egpNeighEntry 7 } - -egpNeighInErrMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP-defined error messages received - from this EGP peer." - ::= { egpNeighEntry 8 } - -egpNeighOutErrMsgs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP-defined error messages sent to - this EGP peer." - ::= { egpNeighEntry 9 } - -egpNeighStateUps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP state transitions to the UP - state with this EGP peer." - ::= { egpNeighEntry 10 } - -egpNeighStateDowns OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EGP state transitions from the UP - state to any other state with this EGP peer." - ::= { egpNeighEntry 11 } - -egpNeighIntervalHello OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The interval between EGP Hello command - retransmissions (in hundredths of a second). This - represents the t1 timer as defined in RFC 904." - ::= { egpNeighEntry 12 } - -egpNeighIntervalPoll OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The interval between EGP poll command - - retransmissions (in hundredths of a second). This - represents the t3 timer as defined in RFC 904." - ::= { egpNeighEntry 13 } - -egpNeighMode OBJECT-TYPE - SYNTAX INTEGER { active(1), passive(2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The polling mode of this EGP entity, either - passive or active." - ::= { egpNeighEntry 14 } - -egpNeighEventTrigger OBJECT-TYPE - SYNTAX INTEGER { start(1), stop(2) } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "A control variable used to trigger operator- - initiated Start and Stop events. When read, this - variable always returns the most recent value that - egpNeighEventTrigger was set to. If it has not - been set since the last initialization of the - network management subsystem on the node, it - returns a value of `stop'. - - When set, this variable causes a Start or Stop - event on the specified neighbor, as specified on - pages 8-10 of RFC 904. Briefly, a Start event - causes an Idle peer to begin neighbor acquisition - and a non-Idle peer to reinitiate neighbor - acquisition. A stop event causes a non-Idle peer - to return to the Idle state until a Start event - occurs, either via egpNeighEventTrigger or - otherwise." - ::= { egpNeighEntry 15 } - --- additional EGP objects - -egpAs OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The autonomous system number of this EGP entity." - ::= { egp 6 } - --- the Transmission group - --- Based on the transmission media underlying each interface --- on a system, the corresponding portion of the Transmission --- group is mandatory for that system. - --- When Internet-standard definitions for managing --- transmission media are defined, the transmission group is --- used to provide a prefix for the names of those objects. - --- Typically, such definitions reside in the experimental --- portion of the MIB until they are "proven", then as a --- part of the Internet standardization process, the --- definitions are accordingly elevated and a new object --- identifier, under the transmission group is defined. By --- convention, the name assigned is: --- --- type OBJECT IDENTIFIER ::= { transmission number } --- --- where "type" is the symbolic value used for the media in --- the ifType column of the ifTable object, and "number" is --- the actual integer value corresponding to the symbol. - --- the SNMP group - --- Implementation of the SNMP group is mandatory for all --- systems which support an SNMP protocol entity. Some of --- the objects defined below will be zero-valued in those --- SNMP implementations that are optimized to support only --- those functions specific to either a management agent or --- a management station. In particular, it should be --- observed that the objects below refer to an SNMP entity, --- and there may be several SNMP entities residing on a --- managed node (e.g., if the node is hosting acting as --- a management station). - -snmpInPkts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of Messages delivered to the - SNMP entity from the transport service." - ::= { snmp 1 } - -snmpOutPkts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Messages which were - passed from the SNMP protocol entity to the - transport service." - ::= { snmp 2 } - -snmpInBadVersions OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Messages which were - delivered to the SNMP protocol entity and were for - an unsupported SNMP version." - ::= { snmp 3 } - -snmpInBadCommunityNames OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Messages delivered to - the SNMP protocol entity which used a SNMP - community name not known to said entity." - ::= { snmp 4 } - -snmpInBadCommunityUses OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Messages delivered to - the SNMP protocol entity which represented an SNMP - operation which was not allowed by the SNMP - community named in the Message." - ::= { snmp 5 } - -snmpInASNParseErrs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of ASN.1 or BER errors - encountered by the SNMP protocol entity when - decoding received SNMP Messages." - ::= { snmp 6 } - --- { snmp 7 } is not used - -snmpInTooBigs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - delivered to the SNMP protocol entity and for - which the value of the error-status field is - `tooBig'." - ::= { snmp 8 } - -snmpInNoSuchNames OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - delivered to the SNMP protocol entity and for - which the value of the error-status field is - `noSuchName'." - ::= { snmp 9 } - -snmpInBadValues OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - delivered to the SNMP protocol entity and for - which the value of the error-status field is - `badValue'." - ::= { snmp 10 } - -snmpInReadOnlys OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number valid SNMP PDUs which were - delivered to the SNMP protocol entity and for - which the value of the error-status field is - `readOnly'. It should be noted that it is a - protocol error to generate an SNMP PDU which - contains the value `readOnly' in the error-status - field, as such this object is provided as a means - of detecting incorrect implementations of the - - SNMP." - ::= { snmp 11 } - -snmpInGenErrs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - delivered to the SNMP protocol entity and for - which the value of the error-status field is - `genErr'." - ::= { snmp 12 } - -snmpInTotalReqVars OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of MIB objects which have been - retrieved successfully by the SNMP protocol entity - as the result of receiving valid SNMP Get-Request - and Get-Next PDUs." - ::= { snmp 13 } - -snmpInTotalSetVars OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of MIB objects which have been - altered successfully by the SNMP protocol entity - as the result of receiving valid SNMP Set-Request - PDUs." - ::= { snmp 14 } - -snmpInGetRequests OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Get-Request PDUs which - have been accepted and processed by the SNMP - protocol entity." - ::= { snmp 15 } - -snmpInGetNexts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Get-Next PDUs which have - been accepted and processed by the SNMP protocol - entity." - ::= { snmp 16 } - -snmpInSetRequests OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Set-Request PDUs which - have been accepted and processed by the SNMP - protocol entity." - ::= { snmp 17 } - -snmpInGetResponses OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Get-Response PDUs which - have been accepted and processed by the SNMP - protocol entity." - ::= { snmp 18 } - -snmpInTraps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Trap PDUs which have - been accepted and processed by the SNMP protocol - entity." - ::= { snmp 19 } - -snmpOutTooBigs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - generated by the SNMP protocol entity and for - which the value of the error-status field is - `tooBig.'" - ::= { snmp 20 } - -snmpOutNoSuchNames OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - generated by the SNMP protocol entity and for - which the value of the error-status is - `noSuchName'." - ::= { snmp 21 } - -snmpOutBadValues OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - generated by the SNMP protocol entity and for - which the value of the error-status field is - `badValue'." - ::= { snmp 22 } - --- { snmp 23 } is not used - -snmpOutGenErrs OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP PDUs which were - generated by the SNMP protocol entity and for - which the value of the error-status field is - `genErr'." - ::= { snmp 24 } - -snmpOutGetRequests OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Get-Request PDUs which - have been generated by the SNMP protocol entity." - ::= { snmp 25 } - -snmpOutGetNexts OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Get-Next PDUs which have - been generated by the SNMP protocol entity." - ::= { snmp 26 } - -snmpOutSetRequests OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Set-Request PDUs which - have been generated by the SNMP protocol entity." - ::= { snmp 27 } - -snmpOutGetResponses OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Get-Response PDUs which - have been generated by the SNMP protocol entity." - ::= { snmp 28 } - -snmpOutTraps OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of SNMP Trap PDUs which have - been generated by the SNMP protocol entity." - ::= { snmp 29 } - -snmpEnableAuthenTraps OBJECT-TYPE - SYNTAX INTEGER { enabled(1), disabled(2) } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Indicates whether the SNMP agent process is - permitted to generate authentication-failure - traps. The value of this object overrides any - configuration information; as such, it provides a - means whereby all authentication-failure traps may - be disabled. - - Note that it is strongly recommended that this - object be stored in non-volatile memory so that it - remains constant between re-initializations of the - network management system." - ::= { snmp 30 } - -END |