summaryrefslogtreecommitdiff
path: root/scripts/install-system
diff options
context:
space:
mode:
Diffstat (limited to 'scripts/install-system')
-rwxr-xr-xscripts/install-system1637
1 files changed, 0 insertions, 1637 deletions
diff --git a/scripts/install-system b/scripts/install-system
deleted file mode 100755
index e8464951..00000000
--- a/scripts/install-system
+++ /dev/null
@@ -1,1637 +0,0 @@
-#!/bin/bash
-#
-# Module: install-system
-#
-# **** License ****
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# This code was originally developed by Vyatta, Inc.
-# Portions created by Vyatta are Copyright (C) 2006, 2007 Vyatta, Inc.
-# All Rights Reserved.
-#
-# Author: Robert Bays
-# Date: 2006
-# Description:
-#
-# **** End License ****
-#
-# Vyatta system installer script.
-#
-
-if [ `whoami` != 'root' ] ; then
- echo "This script must be run with root privileges."
- exit 1
-fi
-
-# If you set VYATTA_AUTO_INSTALL I will try to do an automated install for you
-
-if [ -e /etc/default/vyatta ] ; then
- . /etc/default/vyatta
-fi
-
-# get system manufactuer, Xen needs special treatment
-MANUF=`/usr/sbin/dmidecode -s system-manufacturer`
-
-: ${vyatta_prefix:=/opt/vyatta}
-: ${vyatta_exec_prefix:=$vyatta_prefix}
-: ${vyatta_bindir:=${vyatta_exec_prefix}/bin}
-: ${vyatta_sbindir:=${vyatta_exec_prefix}/sbin}
-: ${vyatta_sysconfdir:=${vyatta_prefix}/etc}
-
-ofrconfdir=${vyatta_sysconfdir}/config
-rootfsdir=/mnt/rootfs
-
-# By default this is not a union install
-# UNION=false
-
-# install log file name
-INSTALL_LOG=/tmp/install-$$.log
-# Absolute minimum root partition size in MB. Below this, we won't let
-# you install.
-ROOT_MIN=1000
-
-# the base install drive e.g. sda
-if [ -n "$INSTALL_DRIVE" ]; then
- INSTALL_DRIVE=""
-fi
-# the install partition e.g. sda1
-if [ -n "$ROOT_PARTITION" ]; then
- ROOT_PARTITION=""
-fi
-# the config partition e.g. sda2
-if [ -n "$CONFIG_PARTITION" ]; then
- CONFIG_PARTITION=""
-fi
-# the size of the root partition
-if [ -n "$ROOT_PARTITION_SIZE" ]; then
- ROOT_PARTITION_SIZE=""
-fi
-# global holding variable used in the select_partition sub
-PARTITION=''
-
-# default file system type
-if [ "$MANUF" = "Xen" ]; then
- ROOT_FSTYPE="ext3"
-else
- ROOT_FSTYPE="ext4"
-fi
-
-# start of root partition (64 sectors == 32K bytes)
-ROOT_OFFSET="64S"
-
-# Process ID of this script for the lame marketing spinner
-SPID=$$
-
-# Grub options
-GRUB_OPTIONS="quiet"
-
-# Enable Vesa framebuffer mode (comment out to disable)
-VGA_LOGO="vga=0x314" # 800 x 600 (16bit colors)
-
-# trap signals so we can kill runaway progress indicators
-trap 'progress_indicator stop; exit 1' 1
-trap 'progress_indicator stop; exit 1' 2
-
-# turn off any mounted swap partitions
-turnoffswap () {
- if [ -f "/proc/swaps" ]; then
- myresponse=$(cat /proc/swaps)
- if [ -n "$myresponse" ]; then
- echo "turning off swaps..." >> $INSTALL_LOG
- swapoff -a
- fi
- fi
-}
-
-tolower () {
- echo "$*" | tr '[:upper:]' '[:lower:]'
-}
-
-# Validates a user response. Returns the response if valid.
-# Returns the default is the user just hits enter.
-# Returns nothing if not valid. Default parameter is $1.
-# Options are in $2. If options are defined return must be a member
-# of the enum.
-get_response () {
- local ldefault=$(tolower "$1")
- local loptions=$(tolower "$2")
-
- # get the response from the user
- read myresponse
- myresponse=$(tolower "$myresponse")
-
- # Check to see if the user accepts the default
- if [ -z "$myresponse" ]; then
- echo -n $ldefault
- # if we are passing in options to check, make sure response is a valid option
- elif [ -n "$loptions" ]; then
- for token in $loptions
- do
- if [ "$token" == "$myresponse" ]; then
- echo -n "$myresponse"
- return 0
- fi
- done
- return 1
- else
- echo -n "$myresponse"
- fi
-
- return 0
-}
-
-# Return the size of the drive in MB
-get_drive_size () {
- local ldrive=$1
-
- # Get size of disk in 1k blocks
- local blocks=$(sfdisk -s /dev/$ldrive)
-
- # Translate to Megabytes (SI units)
- local bytes=$(($blocks * 1024))
- local lsize=$(($bytes / 1000000))
-
- echo $lsize
-}
-
-# Probe hardrives not shown in /proc/partitions by default
-probe_drives () {
- # Find drives that may not be in /proc/partitions since not mounted
- drive=$(ls /sys/block | grep '[hsv]d.')
-
- # now exclude all drives that are read-only
- for drive in $drive
- do
- if [ $(cat /sys/block/$drive/ro) -ne 0 ]
- then
- output=$(mount | grep $drive)
- if [ -z "$output" ]; then
- output=$(parted -s /dev/$drive p)
- fi
- fi
- done
-}
-
-
-warn_of_dire_consequences () {
- # Give the user a requisite warning that we are about to nuke their drive
- response=''
- while [ -z "$response" ]
- do
- echo "This will destroy all data on /dev/$INSTALL_DRIVE."
- echo -n "Continue? (Yes/No) [No]: "
- response=$(get_response "No" "Yes No Y N")
-
- if [ "$response" == "no" ] || [ "$response" == "n" ]; then
- echo "Ok then. Exiting..."
- exit 1
- fi
- done
-}
-
-
-
-check_for_old_raid () {
- # First, trigger construction of previously configured RAID groups
- echo -n "Looking for pre-existing RAID groups..."
- raid_config=`mdadm --examine --scan`
- if [ -z "$raid_config" ]; then
- echo "none found."
- return
- fi
-
- echo "found some."
- echo "Trying to configure pre-existing RAID groups..."
- mdadm --assemble --scan --auto=yes --symlink=no
-
- # Identify physical drives
- raid_drives=$(cat /proc/partitions | awk '{ if ($4!="name") { print $4 } }' | grep "md" | egrep -v "^$")
-
- if [ -z "$raid_drives" ]; then
- echo "Unable to configure any RAID groups."
- return
- fi
-
- numraids=`echo $raid_drives | wc -w`
-
- if [ $numraids -eq 1 ]; then
- echo "The following RAID group is now configured:"
- else
- echo "The following RAID groups are now configured:"
- fi
-
- for drive in $raid_drives
- do
- cat /proc/mdstat | grep --after-context 2 ^$drive | sed -e 's/^/\t/'
- done
-
- if [ $numraids -eq 1 ]; then
- echo -n "Would you like to use this one? (Yes/No) [Yes]:"
- else
- echo -n "Would you like to use one of these? (Yes/No) [Yes]:"
- fi
-
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" == "no" ] || [ "$response" == "n" ]; then
- echo
- echo "Ok. Not using existing RAID groups."
- echo
-
- # pick the first RAID group to be broken
- raid_drive=$(echo $raid_drives | /usr/bin/awk '{ print $1 }')
-
- echo "Would you like to break RAID group $raid_drive so that its"
- echo "members can be re-used for a new installation, understanding"
- echo -n "that doing so will destroy all data on it? (Yes/No) [No]:"
- destroy_raid=$(get_response "No" "Yes No Y N")
- echo
-
- if [ "${destroy_raid:0:1}" = "y" ]; then
- echo "OK. Breaking the RAID group $raid_drive."
-
- members=`ls /sys/block/$raid_drive/slaves`
-
- echo "First, stopping all existing RAID groups:"
- mdadm --stop --scan
-
- for member in $members ; do
- drive=${member:0:3}
- part=${member:3:1}
- echo "Re-setting partition ID for RAID group $raid_drive member /dev/${member}:"
- sfdisk --change-id /dev/$drive $part 0x83
- echo "Clearing RAID superblock from RAID group $raid_drive member /dev/${member}."
- mdadm --zero-superblock /dev/$member
- done
- else
- echo "OK. Stopping, but not breaking, existing RAID groups:"
- mdadm --stop --scan
- fi
-
- echo
- return
- fi
-
- if [ $numraids -eq 1 ]; then
- INSTALL_DRIVE=$raid_drives
- else
- # take the first drive as the default
- INSTALL_DRIVE=$(echo $raid_drives | /usr/bin/awk '{ print $1 }')
- echo -n "Which one would you like to use? ($raid_drives) [$INSTALL_DRIVE]: "
- INSTALL_DRIVE=$(get_response "$INSTALL_DRIVE" "$drives")
- fi
-
- echo "Using RAID partition $INSTALL_DRIVE"
-
- raid_degraded=`cat /sys/block/$INSTALL_DRIVE/md/degraded`
- raid_sync_action=`cat /sys/block/$INSTALL_DRIVE/md/sync_action`
-
- if [ "$raid_degraded" = "1" ]; then
- echo
- if [ "$raid_sync_action" = "recover" ]; then
- echo "Error: This RAID set is degraded and is in the process of"
- echo "rebuilding. It is not safe to install onto it while the"
- echo "rebuild is in progress. Please wait for the rebuild to"
- echo "complete and then re-start the installation. You may"
- echo "monitor the progress of the RAID rebuild with the"
- echo "command:"
- echo
- echo " show raid $INSTALL_DRIVE"
- echo
- exit 1
- fi
- echo "Warning: This RAID set is degraded, but is not in the"
- echo "process of rebuilding. It is safe to perform the installation"
- echo "onto a degraded RAID set that is not in the process of"
- echo "rebuilding. You may stop the installation now and rebuild the"
- echo "RAID set, or continue installing onto it. If you continue"
- echo "installing, do not attempt to rebuild the RAID set until the"
- echo "installation has completed and you have rebooted the system."
- echo
- fi
-
- warn_of_dire_consequences
-
- ROOT_PARTITION=$INSTALL_DRIVE
-
- # make sure we aren't working on a mounted part
- unmount "$INSTALL_DRIVE"
-
- # check for an old config on the partition
- check_config_partition "$ROOT_PARTITION"
-
- # create the filesystem on the part
- make_filesystem "$ROOT_PARTITION"
-
- INSTALL_METHOD=RAID
-}
-
-check_for_new_raid () {
- # Identify physical drives
- drives=$(cat /proc/partitions | awk '{ if ($4!="name") { print $4 } }' | egrep -v "[0-9]$" | egrep -v "^$")
-
- numdrives=`echo $drives | wc -w`
-
- # Need at least two drives for RAID-1. We don't yet have the code
- # to handle selection of two from a set of 3 or more, so for now, we
- # only support two drives.
- #
- if [ $numdrives -ne 2 ]; then
- return
- fi
-
- drive1=`echo $drives | awk '{ print $1 }'`
- drive2=`echo $drives | awk '{ print $2 }'`
-
- drivesize1=$(get_drive_size $drive1)
- drivesize2=$(get_drive_size $drive2)
-
- # Both drives must have enough space to hold our minimum root filesystem
- #
- if [ $drivesize1 -lt $ROOT_MIN -o $drivesize2 -lt $ROOT_MIN ]; then
- return
- fi
-
-
- echo "You have two disk drives:"
- echo -e "\t$drive1 \t$drivesize1 MB"
- echo -e "\t$drive2 \t$drivesize2 MB"
-
- echo -n "Would you like to configure RAID-1 mirroring on them? (Yes/No) [Yes]:"
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" == "no" ] || [ "$response" == "n" ]; then
- echo "Ok. Not configuring RAID-1."
- return
- fi
-
- if [ $drivesize1 -ne $drivesize2 ]; then
- echo "Since the disks are not the same size, we will use the smaller"
- echo "of the two sizes in configuring the RAID-1 set. This will"
- echo "waste some space on the larger drive."
- echo ""
- fi
-
- # Configure RAID-1
- echo "This process will erase all data on both drives."
- echo -n "Are you sure you want to do this? (Yes/No) [No]: "
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" == "no" ] || [ "$response" == "n" ]; then
- echo "Ok. Not configuring RAID-1."
- return
- fi
-
- for drive in $drives
- do
- echo "Deleting old partitions on drive $drive"
- # remove any existing partitions on that drive
- delete_partitions "$drive"
- done
-
- # Need to leave space on both disks between the MBR and the start
- # of the first partition for grub. Grub needs to embed a large
- # boot image there when booting off RAID devices.
- #
- # Partition creation variables are in units of megabytes.
- part_start_offset=2
- data_dev=1
-
- if [ $drivesize1 -lt $drivesize2 ]; then
- root_size=$drivesize1
- else
- root_size=$drivesize2
- fi
-
- let root_size-=$part_start_offset
-
- for drive in $drives
- do
- echo "Creating data partition: /dev/${drive}${data_dev}"
- create_partitions "$drive" $root_size $part_start_offset "no"
- sfdisk --change-id /dev/$drive $data_dev 0xfd
- # mark data partition as bootable
- echo "Marking /dev/$drive partition $data_dev bootable" >> $INSTALL_LOG
- parted -s /dev/$drive set $data_dev boot on >> $INSTALL_LOG 2>&1
- done
-
- # Must give partition device time to settle
- sleep 5
- echo
-
- for drive in $drives
- do
- echo "Erasing any previous RAID metadata that may exist on /dev/${drive}${data_dev}"
- mdadm --zero-superblock /dev/${drive}${data_dev}
- done
-
- echo "Creating RAID-1 group on partitions: /dev/${drive1}${data_dev} /dev/${drive2}${data_dev}"
-
- raid_dev=md0
- mdadm --create /dev/$raid_dev --level=1 --raid-disks=2 --metadata=0.90 /dev/${drive1}${data_dev} /dev/${drive2}${data_dev}
-
- if [ $? = 0 -a -e /dev/$raid_dev ]; then
- echo "RAID-1 group created successfully:"
- cat /proc/mdstat | grep --after-context 2 ^$raid_dev | sed -e 's/^/\t/'
- else
- echo "Unable to create RAID-1 group!"
- return
- fi
-
- INSTALL_DRIVE=$raid_dev
- ROOT_PARTITION=$INSTALL_DRIVE
-
- # Give device time to settle...
- sleep 5
-
- # create the filesystem on the part
- make_filesystem "$ROOT_PARTITION"
-
- INSTALL_METHOD=RAID
-}
-
-
-# Takes an argument to display text before choice
-# Sets INSTALL_DRIVE. Note that select_drive should be wrapped
-# in the verification loop, not the included get_response.
-select_drive () {
- # list the drives in /proc/partitions. Remove partitions and empty lines.
- # the first grep pattern looks for devices named c0d0, hda, and sda.
- drives=$(cat /proc/partitions | \
- awk '{ if ($4!="name") { print $4 } }' | \
- egrep "c[0-9]d[0-9]$|[hsv]d[a-z]$" | \
- egrep -v "^$")
-
- # take the first drive as the default
- INSTALL_DRIVE=$(echo $drives | /usr/bin/awk '{ print $1 }')
-
- # Add the drive sizes to the display to help the user decide
- display=''
- for drive in $drives
- do
- size=$(get_drive_size $drive)
- display="$display $drive\t$size"MB"\n"
- done
-
- while true
- do
- # Display the drives and ask the user which one to install to
- echo -e "$display"
- echo
- echo -n "$1 [$INSTALL_DRIVE]:"
- response=$(get_response "$INSTALL_DRIVE" "$drives") && break
- done
- INSTALL_DRIVE="$response"
-
- echo
-}
-
-# Allow the user to select a partition to work with
-# sets the global PARTITION
-# $1 is the text to display before prompt
-select_partition () {
- minsize=$1
- text=$2
- exclude=$3
-
- echo -n "Looking for appropriate partitions: "
- progress_indicator start
-
- # initialize out global var. using globals in this way is bad form. I know.
- PARTITION=''
-
- # list only the partitions in /proc/partitions.
- parts=$(cat /proc/partitions | awk '{ if ($4!="name") { print $4 " "} }' | egrep "[0-9]" | egrep -v "loop" | tr -d '\n')
-
- # remove any partitions we have already previously used
- if [ -n "$exclude" ]; then
- for part in $parts;
- do
- temp=$(echo $part | egrep -v $exclude)
- parts_temp="$parts_temp $temp"
- done
- parts=$parts_temp
- fi
-
- # Get the partition sizes for display
- # only show linux partitions that have sizes, i.e. remove loops
- display=''
- myparts=''
- for part in $parts
- do
- if [ ${part:0:2} = "md" ]; then
- parttype="RAID"
- else
- rootdev=$(echo $part | sed 's/[0-9]//g')
- parttype=$(fdisk -l /dev/$rootdev | grep $part | grep Linux)
- fi
- if [ -n "$parttype" ]; then
- lsize=$(get_drive_size $part)
- if [ "$lsize" -a $lsize -ge $minsize ]; then
- display="$display $part\t\t$lsize"MB"\n"
- myparts="$myparts $part"
- fi
- fi
- done
-
- progress_indicator stop
- echo "OK"
-
- if [ -n "$myparts" ]; then
- lpartition=''
- while [ -z "$lpartition" ]
- do
- # take the first partition as the default
- lpartition=$(echo $myparts | /usr/bin/awk '{ print $1 }')
-
- echo "I found the following partitions suitable for the Vyatta image:"
- echo -e "Partition\tSize"
- echo -e "$display"
- echo
- echo -n "$text [$lpartition]: "
-
- lpartition=$(get_response "$lpartition" "$myparts")
- echo
- done
- else
- echo "No suitable partition sizes found. Exiting..." | tee $INSTALL_LOG
- exit 1
- fi
- PARTITION=$lpartition
-}
-
-rename_old_config() {
- files=$(find /mnt/config -mindepth 1 -type f | grep -v pre-glendale)
- for f in $files; do
- if grep -q '/\*XORP Configuration File, v1.0\*/' $f >&/dev/null; then
- CURTIME=$(date +%F-%H%M%S)
- mv $f $f.pre-glendale.$CURTIME
- fi
- done
-}
-
-# copy old config file from /mnt/tmp
-save_old_config() {
- local response=''
- while [ -z "$response" ]
- do
- echo "/dev/$lpart has an old configuration directory!"
- echo -ne "Would you like me to save the data on it\nbefore I delete it? (Yes/No) [Yes]: "
- response=$(get_response "Yes" "Yes No Y N")
- done
-
- if [ "$response" == "yes" ] || [ "$response" == "y" ]; then
- mkdir -p /mnt/config
- if [ -d /mnt/tmp/opt/vyatta/etc/config ]; then
- output=$(cp -pR /mnt/tmp/opt/vyatta/etc/config/* /mnt/config)
- else
- output=$(cp -pR /mnt/tmp/* /mnt/config)
- fi
- if [ -n "$output" ]; then
- echo -e "Warning: error in copying the old config partition.\nSee $INSTALL_LOG for more details."
- echo -e "Warning: error in copying the old config partition.\ncp -pR /mnt/tmp/* /mnt/config\n$output\n" >> $INSTALL_LOG
- fi
- rename_old_config
- fi
-}
-
-save_old_keys() {
- local response=''
-
- while [ -z "$response" ]
- do
- echo "/dev/$lpart has SSH host keys"
- echo -ne "Would you like me to keep SSH keys on new install? (Yes/No) [Yes]: "
- response=$(get_response "Yes" "Yes No Y N")
- done
-
- if [ "$response" == "yes" ] || [ "$response" == "y" ]; then
- mkdir -p /mnt/ssh
- output=$(cp -p /mnt/tmp/etc/ssh/ssh_host_* /mnt/ssh)
-
- if [ -n "$output" ]; then
- echo -e "Warning: error in copying the old ssh keys."
- echo -e "See $INSTALL_LOG for more details."
- echo "Warning: error in copying the old ssh keys." >> $INSTALL_LOG
- echo "cp -pR /mnt/tmp/etc/ssh/ssh_host_* /mnt/ssh" >> $INSTALL_LOG
- echo "$output\n">> $INSTALL_LOG
- fi
- fi
-}
-
-save_image_config() {
- image_name=$1
-
- # Cleanup from possible partial last run
- rm -fr /mnt/config
- mkdir /mnt/config
-
- output=$(cp -pR /mnt/tmp/boot/$image_name/live-rw/config/* /mnt/config)
-
- if [ -n "$output" ]; then
- echo -e "Warning: error in copying the old config partition.\nSee $INSTALL_LOG for more details."
- echo "Warning: error in copying the old config partition.\ncp -pR /mnt/tmp/* /mnt/config\n$output\n"
- fi
- rename_old_config
-}
-
-save_image_keys() {
- image_name=$1
-
- if [ ! -d /mnt/tmp/boot/$image_name/live-rw/etc/ssh ]; then
- echo "No SSH keys found on $image_name, so none can be saved."
- return;
- fi
-
- echo -n "Would you like to save SSH keys from $image_name too? (Yes/No) [Yes] "
-
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" != "yes" ] && [ "$response" != "y" ]; then
- echo "OK. SSH keys not saved."
- return
- fi
-
- mkdir -p /mnt/ssh
- output=$(cp -p /mnt/tmp/boot/$image_name/live-rw/etc/ssh/ssh_host_* /mnt/ssh)
-
- if [ -n "$output" ]; then
- echo -e "Warning: error in copying the old ssh keys."
- echo -e "See $INSTALL_LOG for more details."
- echo "Warning: error in copying the old ssh keys." >> $INSTALL_LOG
- echo "cp -pR /mnt/tmp/etc/ssh/ssh_host_* /mnt/ssh" >> $INSTALL_LOG
- echo "$output\n">> $INSTALL_LOG
- return
- fi
-
- # reset modes on keys (should already be set)
- chmod 600 /mnt/ssh/*_key 2>&1
- chmod 644 /mnt/ssh/*.pub 2>&1
-
- echo "SSH keys have been saved."
-}
-
-
-
-## check_config_partition
-# look to see if this partition contains a config file
-# and back it up
-check_config_partition() {
- lpart=$1
- copied=0
-
- # Cleanup from possible partial last run
- rm -fr /mnt/config
-
- # Look to see if this is a config partition
- mkdir -p /mnt/tmp
- output=$(mount -r /dev/$lpart /mnt/tmp 2>&1)
- if [ $? != 0 ]; then
- echo -e "Cannot mount /dev/$lpart"."\nmount /dev/$ldrive$part /mnt/tmp\nExiting..." >> $INSTALL_LOG
- echo "$output" >> $INSTALL_LOG
- return
- fi
-
- # Look to see if there is a config partition there
- if [ -f /mnt/tmp/opt/vyatta/etc/config/.vyatta_config ] ||
- [ -f /mnt/tmp/.vyatta_config ]; then
- save_old_config
- copied=1
- fi
-
- # Look to see if there are SSH host keys
- if [ -d /mnt/tmp/etc/ssh ]; then
- save_old_keys
- copied=1
- fi
-
- if [ $copied -eq 0 ]; then
- # Check for images
- images=()
- image_dirs=/mnt/tmp/boot/*
-
- for dir in $image_dirs; do
- if [ -f $dir/live-rw/config/.vyatta_config ]; then
- item=${dir##/mnt/tmp/boot/}
- images=($item ${images[@]})
- fi
- done
-
- num_images=${#images[@]}
-
- if [ $num_images -gt 0 ]; then
- echo "I found the following installed system image(s) with config files on $part:"
- for (( i = 0; i < $num_images; i++ )); do
- echo " $((i + 1)): ${images[$i]}"
- done
-
- if [ $num_images -eq 1 ]; then
- echo -n "Would you like to save config information from it? (Yes/No) [Yes] "
- else
- echo -n "Would you like to save config information from one? (Yes/No) [Yes] "
- fi
-
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" != "yes" ] && [ "$response" != "y" ]; then
- echo "OK. Config information not saved."
- umount /mnt/tmp
- return
- fi
-
- if [ $num_images -gt 1 ]; then
- image_index=-1
- while [ $image_index -lt 0 -o $image_index -ge $num_images ]; do
- echo -n "Which image would you like to use? (1 .. $num_images): "
- read num
- image_index=$((num - 1))
- done
- else
- image_index=0
- fi
-
- image_name=${images[$image_index]}
- echo "Saving config information from image $image_name."
- save_image_config $image_name
- echo "Done."
- save_image_keys $image_name
- fi
- fi
- umount /mnt/tmp
-}
-
-# Delete all existing partitions for an automated install
-# $1 is the drive to delete partitions from
-delete_partitions () {
- ldrive=$1
-
- # get the partitions on the drive
- # in the first grep below we add the optional [p] in order to accomdate cciss drives
- partitions=$(cat /proc/partitions | grep $ldrive[p]*[0-9] | awk '{ print $4 }' | sed 's/\(.*\)\([0-9]$\)/\2/g' | grep -v "^$")
-
- # now for each part, blow it away
- for part in $partitions
- do
- # Look to see if this is a config partition
- check_config_partition "$ldrive$part"
-
- echo "Removing partition $part on /dev/$ldrive" >> $INSTALL_LOG
- output=$(parted -s /dev/$ldrive rm $part)
- status=$?
- if [ "$status" != 0 ]; then
- echo -e "Warning: cannot delete partition $part on $ldrive.\nPlease see $INSTALL_LOG for more details."
- echo -e "Warning: cannot delete partition $part on $ldrive.\nparted /dev/$ldrive rm $part\n$output" >> $INSTALL_LOG
- fi
-
- # We add a bogus sleep here because the loop needs to wait for udev
- sleep 5
- done
-}
-
-# make a filesystem on the drive
-# $1 is the drive to format
-make_filesystem () {
- ldrive=$1
-
- echo -n "Creating filesystem on /dev/$ldrive: "
- echo "Creating filesystem on /dev/$ldrive..." >> $INSTALL_LOG
-
- progress_indicator start
- output=$(mkfs -t $ROOT_FSTYPE /dev/$ldrive 2>&1)
- status=$?
- if [ "$status" != 0 ]; then
- echo -e "Error: couldn't create the root filesystem.\nSee $INSTALL_LOG for further details.\nExiting..."
- echo -e "Error: couldn't create the root filesystem.\n/sbin/mke2fs -j /dev/$ldrive\n$output"
- exit 1
- fi
- progress_indicator stop
- echo "OK"
-}
-
-# create the root partition
-# $1 is the install drive e.g. sda
-# $2 is the partition size e.g. 512
-# This will set the global ROOT_PARTITION
-create_partitions() {
- ldrive=$1
- root_part_size=$2
- start_offset=$3
- initialize_fs=$4
-
- # Make sure there is enough space on drive
- size=$(get_drive_size "$ldrive")
- if [ "$root_part_size" -gt "$size" ]; then
- echo "Error: $ldrive is only $size"MB" large. Desired root is $root_part_size"
- exit 1
- fi
-
- # Make sure you can print disk info using parted
- parted --script /dev/$ldrive p >/dev/null 2>&1
-
- # If unable to read disk, it's likely it needs a disklabel
- if [ "$?" != "0" ]; then
- echo "Creating a new disklabel on $ldrive"
- echo "parted /dev/$ldrive mklabel msdos"
- output=$(parted -s /dev/$ldrive mklabel msdos)
-
- parted --script /dev/$ldrive p >/dev/null 2>&1
- if [ "$?" != "0" ]; then
- echo "Unable to read disk label. Exiting."
- exit 1
- fi
- fi
-
- echo "Creating root partition on /dev/$ldrive" >> $INSTALL_LOG
-
- # make the root partition
- # align at optimal block boundary
- output=$(parted -s /dev/$ldrive mkpart primary $start_offset $root_part_size)
- status=$?
- if [ "$status" != 0 ]; then
- echo -e "Error creating primary partition on $ldrive.\nPlease see $INSTALL_LOG for more details.\nExiting..."
- echo -e "Error creating primary partition on $ldrive.\nparted /dev/$ldrive mkpart primary $start_offset $root_part_size\n$output" >> $INSTALL_LOG
- exit 1
- fi
-
- # set the partition number on the device.
- if [ -n "$( echo $ldrive | grep -E "cciss|ida" )" ]; then
- # if this is a cciss
- ROOT_PARTITION=$ldrive"p1"
- else
- # else... the rest of the world
- ROOT_PARTITION=$ldrive"1"
- fi
- # udev takes time to re-add the device file, so wait for it
- while [ ! -b "/dev/$ROOT_PARTITION" ]
- do
- sleep 1
- done
-
- if [ "$initialize_fs" = "yes" ]; then
- # make the root and config file systems.
- make_filesystem "$ROOT_PARTITION"
- fi
-}
-
-# Copy directory with pretty progress bar
-copy_filesystem() {
- cp -r -v --preserve=all "$@" | awk '{
- ++files
- if ((files % 100) == 0) {
- percent = files / total_files * 100
- printf "%3d%% [", percent
- for (i=0;i<percent; i+=2)
- printf "="
- printf ">"
- for (;i<100;i+=2)
- printf " "
- printf "]\r"
- fflush()
- }
- }' total_files=$(find "$@" | wc -l)
-}
-
-# Install the root filesystem
-# $1 is the partition to install on
-install_root_filesystem () {
- ldrive=$1
- version=`dpkg-query --showformat='${Version}' --show vyatta-version`
-
- dpkg="/usr/bin/dpkg --force-all --root=$rootfsdir"
- echo "Mounting /dev/$ldrive "
- echo "Mounting /dev/$ldrive..." >> $INSTALL_LOG
-
- # make the mount point
- output=$(/bin/mkdir -p $rootfsdir)
-
- # mount the partition
- output=$(mount /dev/$ldrive $rootfsdir)
- status=$?
-
- if [ "$status" != 0 ]; then
- echo -e "Error trying to mount the new root partition.\nPlease see $INSTALL_LOG for details.\nExiting..."
- echo -e "Error trying to mount the new root partition.\nmount /dev/$ldrive $rootfsdir\n$output" >> $INSTALL_LOG
- exit 1
- fi
-
- if [ -z "$UNION" ]; then
- echo "Copying system files to /dev/$ROOT_PARTITION: "
- # Mount the squashfs for copying
- output=$(mkdir -p /mnt/squashfs)
- if [ -f /live/image/live/filesystem.squashfs ]; then
- output=$(mount /live/image/live/filesystem.squashfs /mnt/squashfs -t squashfs -o loop)
- status=$?
- elif [ -f /live/image/boot/$version/$version.squashfs ]; then
- output=$(mount /live/image/boot/$version/$version.squashfs /mnt/squashfs -t squashfs -o loop)
- status=$?
- else
- echo -e "Error: Unable to find a squash image. To install natively\nthe install media must be a livecd or a union install.\nExiting...\n\n"
- echo -e "Error: Unable to find a squash image. To install natively\nthe install media must be a livecd or a union install.\nExiting...\n\n" >> $INSTALL_LOG
- exit 1
- fi
-
- if [ "$status" != 0 ]; then
- echo -e "Error trying to mount the squashfs.\nPlease see install log for more details.\nExiting..."
- echo -e "Error trying to mount the squashfs.\nmount /live/image/live/filesystem.squashfs /mnt/squashfs -t squashfs -o loop\n$output" >> $INSTALL_LOG
- exit 1
- fi
-
- echo "Copying /mnt/squashfs/* to $rootfsddir" >>$INSTALL_LOG
- copy_filesystem /mnt/squashfs/* $rootfsdir 2>>$INSTALL_LOG
- status=$?
- echo
-
- if [ "$status" != 0 ]; then
- echo -e "Error trying to copy the rootfs.\nPlease see install log for more details.\nExiting..."
- exit 1
- fi
-
- # unmount the squashfs. No big deal if it fails.
- output=$(umount /mnt/squashfs)
-
- # create the fstab
- local rootdev="/dev/$ROOT_PARTITION";
- uuid=$(dumpe2fs -h $rootdev 2>/dev/null | awk '/^Filesystem UUID/ {print $3}')
- if [ -z "$uuid" ]
- then
- echo "Unable to read filesystem UUID. Exiting."
- exit 1
- else
- if [ "$MANUF" = "Xen" ]; then
- #disable barriers explicitly (just incase)
- echo -e "UUID=$uuid\t/\t$ROOT_FSTYPE\tnoatime,nobarrier\t0 1" >> $rootfsdir/etc/fstab
- else
- echo -e "UUID=$uuid\t/\t$ROOT_FSTYPE\tnoatime\t0 1" >> $rootfsdir/etc/fstab
- fi
- fi
-
- #setup the hostname file
- cp /etc/hostname $rootfsdir/etc/
- cp /etc/hosts $rootfsdir/etc/
-
- progress_indicator stop
- echo "OK"
- else
- # UNION install
- mkdir -p $rootfsdir/boot/$version
- ## make dir for backing store
- mkdir -p $rootfsdir/boot/$version/live-rw
- if [ -f /live/image/live/filesystem.squashfs ]; then
- echo Copying squashfs image...
- cp /live/image/live/filesystem.squashfs $rootfsdir/boot/$version/$version.squashfs
- echo Copying kernel and initrd images...
- cp -a /boot/* $rootfsdir/boot/$version/
- else
- echo Copying image files...
- cp -ar /live/image/boot/$version $rootfsdir/boot/
- fi
- fi
-}
-
-# copy the configuration to the config partition
-# $1 is the config partition device
-copy_config () {
- config_partition=$1
- lerror=''
- config_default=$vyatta_sysconfdir/config.boot.default
- tmp_config_default=/tmp/${vyatta_sysconfdir//\//__}
-
- # create the config directory on the union file system
- mkdir -p $rootfsdir$ofrconfdir
-
- # create the proper perms on the new config partition
- chgrp vyattacfg $rootfsdir$ofrconfdir
- chmod 775 $rootfsdir$ofrconfdir
-
- # create our config partition marker
- touch $rootfsdir$ofrconfdir/.vyatta_config
-
- if [ -d /mnt/config ]; then
- echo "Copying old configurations to config partition."
- cp -pR /mnt/config/* $rootfsdir$ofrconfdir
- else
- # Find the config files and give the user the option to copy config files
- # TODO: this needs cleaned up
- if [ -f $ofrconfdir/config.boot ]; then
- config=$ofrconfdir/config.boot
- fi
-
- if [ -n "$config" ]; then
- echo "I found the following configuration files"
- for file in $config
- do
- echo $file
- done
-
- default=$(echo -e $config | awk '{ print $1 }')
-
- while [ -z "$configfile" ]
- do
- echo -n "Which one should I copy to $INSTALL_DRIVE? [$default]: "
- configfile=$(get_response "$default" "$config")
- done
-
- echo
- output=$(cp $configfile $rootfsdir$ofrconfdir)
- if [ -n "$output" ]; then
- echo "Error copying file $configfile to config directory. Exiting..." >> $INSTALL_LOG
- exit 1
- fi
- fi
- fi
-
- # set the permissions on the new config file
- if [ -f $rootfsdir$ofrconfdir/config.boot ]; then
- chgrp vyattacfg $rootfsdir$ofrconfdir/config.boot
- chmod 775 $rootfsdir$ofrconfdir/config.boot
- fi
-}
-
-# copy the saved ssh host key to the new install
-copy_sshkeys() {
- if [ -d /mnt/ssh ]; then
- echo "Copying SSH keys."
- cp -p /mnt/ssh/* $rootfsdir/etc/ssh
- fi
-}
-
-set_encrypted_password() {
- sed -i \
- -e "/ user $1 {/,/}/s/encrypted-password.*\$/encrypted-password \"$2\"/" $3
-}
-
-change_password() {
- local user=$1
- local pwd1="1"
- local pwd2="2"
-
- until [[ "$pwd1" == "$pwd2" ]]
- do
- read -p "Enter password for user '$user': " -r -s pwd1 <>/dev/tty 2>&0
- echo
- if [[ "$pwd1" == "" ]]; then
- echo "'' is not a valid password"
- continue
- fi
- read -p "Retype password for user '$user':" -r -s pwd2 <>/dev/tty 2>&0
- echo
-
- if [ "$pwd1" != "$pwd2" ]
- then
- echo "Passwords do not match"
- fi
- done
-
- # escape any slashes in resulting password
- local epwd=$(mkpasswd -H md5 "$pwd1" | sed 's:/:\\/:g')
- set_encrypted_password $user $epwd $rootfsdir$ofrconfdir/config.boot
-}
-
-# setup grub on the boot sector of a user queried drive
-install_grub () {
- # we now use INSTALL_DRIVE to reference the grub boot drive.
- # that way I can re-use select_drive. I'm lazy that way.
-
- if [ ${INSTALL_DRIVE:0:2} != "md" ]; then
- INSTALL_DRIVE=''
- fi
-
- mkdir -p $rootfsdir/boot/grub
- # Let the user choose the boot sector
-
- while [ -z "$INSTALL_DRIVE" ]
- do
- echo "I need to install the GRUB boot loader."
- echo "I found the following drives on your system:"
- select_drive "Which drive should GRUB modify the boot partition on?"
- done
-
- echo -n "Setting up grub: "
- echo "Setting up grub..." >> $INSTALL_LOG
-
- # Install grub in the boot sector of the primary drive
- progress_indicator start
- grub-install --no-floppy --recheck --root-directory=$rootfsdir /dev/$INSTALL_DRIVE >>$INSTALL_LOG 2>&1
- progress_indicator stop
-
- # Check if using aufs
- if grep -q aufs /proc/filesystems
- then
- if [ -z "$grub_options" ]
- then
- grub_options="union=aufs"
- else
- grub_options="$grub_options union=aufs"
- fi
- fi
-
- version=`dpkg-query --showformat='${Version}' --show vyatta-version`
-
- # if union install tell vyatta-grub-setup
- if [ -n "$UNION" ]; then
- grub_args="-u $version"
- else
- grub_args="-v $version"
- fi
-
- if /opt/vyatta/sbin/vyatta-grub-setup $grub_args "$ROOT_PARTITION" "$grub_options" /mnt/rootfs >>$INSTALL_LOG
- then
- echo "OK"
- else
- echo Grub failed to install!
- exit 1
- fi
-}
-
-# ask for user input on the parted and skip setup methods
-# $1 is whether or not to run parted
-# sets globals INSTALL_DRIVE, ROOT_PARTITION, CONFIG_PARTITION
-setup_method_manual() {
- parted=$1
-
- echo "The VyOS install needs a minimum ${ROOT_MIN}MB root"
- echo "with partiton type 83 (Linux)."
- echo -e "\n\n"
-
- # if this is parted, let the user create the partitions
- if [ "$INSTALL_METHOD" == "parted" ] || [ "$INSTALL_METHOD" == "p" ]; then
- while [ -z "$INSTALL_DRIVE" ]
- do
- # TODO: right now we only run parted on a single drive
- echo -e "\nI found the following drives on your system:"
- select_drive "Which drive would you like to run parted on?"
-
- done
-
- # Unmount the install drive if it is mounted
- unmount "$INSTALL_DRIVE"
-
- # Run parted and let the user configure
- parted /dev/$INSTALL_DRIVE
- fi
-
- # Ask for the root partition and make sure it's valid
- while [ -z "$ROOT_PARTITION" ]
- do
- select_partition 500 "Which partition should I install the root on?"
- # Note that PARTITION is defined in select partition
- ROOT_PARTITION=$PARTITION
- unmount "$ROOT_PARTITION"
- vd=$(grep $ROOT_PARTITION /proc/partitions | awk '{ print $4 }')
-
- if [ -z "$vd" ]; then
- echo
- echo "$ROOT_PARTITION is an invalid partition. Please try again."
- ROOT_PARTITION=""
- fi
- done
-
- # check for an old config on the partition
- check_config_partition "$ROOT_PARTITION"
-
- # create the filesystem on the part
- make_filesystem "$ROOT_PARTITION"
-
- # We need to set the INSTALL_DRIVE if it wasn't set when the user ran parted
- # We assume that we will use the boot sector of the same drive that the
- # partition is on.
- # TODO: Allow different drives to function as the boot device
- if [ -z "$INSTALL_DRIVE" ]; then
- if [ ${ROOT_PARTITION:0:2} = "md" ]; then
- INSTALL_DRIVE=$ROOT_PARTITION
- else
- INSTALL_DRIVE=$(echo $ROOT_PARTITION | sed 's/[0-9]//g')
- fi
- fi
-}
-
-# Walk the user through the auto setup method
-# sets globals INSTALL_DRIVE, ROOT_PARTITION, CONFIG_PARTITION
-setup_method_auto() {
- while [ -z "$INSTALL_DRIVE" ]
- do
- echo "I found the following drives on your system:"
- select_drive "Install the image on?"
-
- # check to make sure the drive is large enough to hold the image
- if [ -n "$INSTALL_DRIVE" ]; then
- lsize=$(get_drive_size "$INSTALL_DRIVE")
- total=$ROOT_MIN
- if [ "$total" -gt "$lsize" ]; then
- echo "Unfortunately, VyOS requires a total of at least $total"MB" to properly install."
- echo "$INSTALL_DRIVE is below the minimum required capacity and therefore, cannot be used to"
- echo -e "complete the installation.\n"
- echo "If other drives are present"
- echo -e "Please select another drive...\n"
-
- INSTALL_DRIVE=''
- fi
- fi
- done
-
- warn_of_dire_consequences
-
- echo
-
- # make sure we aren't working on a mounted part
- unmount "$INSTALL_DRIVE"
-
- # remove any existing partitions on that drive
- delete_partitions "$INSTALL_DRIVE"
-
- # Enforce minimum partion size requirement.
- ROOT_PARTITION_SIZE=0
- while [ $ROOT_MIN -gt $ROOT_PARTITION_SIZE ]; do
- # Get the size of the drive
- size=$(get_drive_size $INSTALL_DRIVE)
-
- # If drive is big, leave more space 512K bytes (1024 sectors)
- # this is better for SSD
- if (( $size > 10000 )); then
- ROOT_OFFSET="1024S"
- fi
-
- echo -n "How big of a root partition should I create? ($ROOT_MIN"MB" - $size"MB") [$size]MB: "
- response=$(get_response "$size")
- # TODO: need to have better error checking on this value
- ROOT_PARTITION_SIZE=$(echo "$response" | sed 's/[^0-9]//g')
- if [ $ROOT_PARTITION_SIZE -lt $ROOT_MIN ] || [ $ROOT_PARTITION_SIZE -gt $size ]; then
- echo "Root partion must be between $ROOT_MIN"MB" and $size"MB""
- echo
- ROOT_PARTITION_SIZE=0
- fi
- done
-
- echo
-
- # now take the data and create the partitions
- create_partitions "$INSTALL_DRIVE" "$ROOT_PARTITION_SIZE" "$ROOT_OFFSET" "yes"
- # mark data partition as bootable
- echo "Marking /dev/$INSTALL_DRIVE partition 1 as bootable" >> $INSTALL_LOG
- parted -s /dev/$INSTALL_DRIVE set 1 boot on >> $INSTALL_LOG 2>&1
- # Must give partition device time to settle
- sleep 5
-}
-
-# walk the user through a union setup
-# sets globals INSTALL_DRIVE, ROOT_PARTITION, CONFIG_PARTITION
-setup_method_union() {
- UNION=1
-
- echo "A union install requires an image partition of at least 250mbs."
- echo "If you want to accomodate more than one image on the partition,"
- echo "it should be larger. Each image is roughly 200mbs. This "
- echo "partition will be the bootable partition for this machine."
- echo
-
- # Ask for the image partition and make sure it's valid
- while [ -z "$ROOT_PARTITION" ]
- do
- select_partition 250 "Which partition should I install the images on?"
- # Note that PARTITION is defined in select partition
- ROOT_PARTITION=$PARTITION
- unmount "$ROOT_PARTITION"
- vd=$(grep $ROOT_PARTITION /proc/partitions | awk '{ print $4 }')
-
- if [ -z "$vd" ]; then
- echo
- echo "$ROOT_PARTITION is an invalid partition. Please try again."
- ROOT_PARTITION=""
- fi
- done
-
- echo Creating filesystem on $ROOT_PARTITION
- make_filesystem $ROOT_PARTITION
-
- echo
- echo "An optional writable persistent root partition may also"
- echo "be created. This partition will allow you to store "
- echo "files between reboots and upgrade packages."
- echo
- echo -n "Would you like to create a persistent root partition? (Yes/No) [Yes]: "
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" == "yes" ] || [ "$response" == "y" ]; then
- echo "The persistent root partition should be a minimum of 50mbs"
- echo "for log files. If you plan on adding any other software or"
- echo "upgrading it, the root partition should be large enough to"
- echo "accomodate those packages"
-
- # Ask for the union partition and make sure it's valid
- while [ -z "$UNION_PARTITION" ]
- do
- select_partition 50 "Which partition should I install the binary images on?" "$ROOT_PARTITION"
- # Note that PARTITION is defined in select partition
- UNION_PARTITION=$PARTITION
- unmount "$UNION_PARTITION"
- vd=$(grep $UNION_PARTITION /proc/partitions | awk '{ print $4 }')
-
- if [ -z "$vd" ]; then
- echo
- echo "$UNION_PARTITION is an invalid partition. Please try again."
- UNION_PARTITION=""
- fi
- done
-
- echo Creating filesystems on $ROOT_PARTITION
- make_filesystem $UNION_PARTITION
-
- echo Labeling $UNION_PARTITION
- e2label /dev/$UNION_PARTITION live-rw
- fi
-}
-
-unmount () {
- # grab the list of mounted drives
- # make sure to reverse sort so as to unmount up the tree
- mounted=$(mount | grep "$1" | cut -f3 -d' ' | sort -r)
- if [ -n "$mounted" ]; then
- echo "I need to unmount: "
- echo "$mounted"
-
- response=''
- while [ -z "$response" ]
- do
- echo -n "Continue (Yes/No) [No]: "
- response=$(get_response "No" "Yes No Y N")
- if [ "$response" == "no" ] || [ "$response" == "n" ]; then
- echo -e "Ok then. Need to unmount to continue.\nExiting..."
- exit 1
- fi
- done
-
- for parts in "$mounted"
- do
- echo "umount $parts" >> $INSTALL_LOG
- output=$(umount $parts)
- status=$?
- if [ "$status" != 0 ]; then
- echo -e "Exiting: error unmounting $parts.\nPlease see $INSTALL_LOG for more details."
- echo -e "Exiting: error unmounting $parts.\numount $parts\n$output" >> $INSTALL_LOG
- exit 1
- fi
- done
- fi
-}
-
-setup_xen_partition_images () {
- if [ -d "$rootfsdir/var/xen/" ]; then
- echo Setting up Xen virtual machine images
- compressed_images=$(ls $rootfsdir/var/xen/*.img.gz 2> /dev/null)
- if [ -n "$compressed_images" ]; then
- for cmp_img in $compressed_images; do
- # uncompress the image
- uncmp_img=$(echo $cmp_img | sed s'/.gz$//')
- if [ ! -f "$uncmp_img" ]; then
- echo decompressing $cmp_img
- gzip -dc $cmp_img > $uncmp_img
- fi
- done
- fi
- echo
- fi
-}
-
-setup_xen_extras () {
- echo "Setting up config files for Xen..."
- # Set up /boot/grub/menu.lst for use by pygrub
- grubfile=$rootfsdir/boot/grub/menu.lst
- echo "timeout 5" >> $grubfile
- echo "" >> $grubfile
- echo "title vyos-virt" >> $grubfile
- echo "root (hd0,0)" >> $grubfile
- echo "kernel /boot/vmlinuz root=/dev/xvda1 ro console=hvc0" >> $grubfile
- echo "initrd /boot/initrd.img" >> $grubfile
-
- # Add /proc/xen entry to fstab
- echo "xenfs /proc/xen xenfs defaults 0 0" >> $rootfsdir/etc/fstab
-
- # Comment out serial port entry and add Xen console entry to inittab.
- inittab=$rootfsdir/etc/inittab
- sed -i -e 's/^T0/#T0/' $inittab
- echo "" >> $inittab
- echo "h0:12345:respawn:/sbin/getty 38400 hvc0" >> $inittab
-}
-
-check_for_xen_extras () {
- prod=`/usr/sbin/dmidecode -s system-product-name`
- if [ "$MANUF" = "Xen" -a "$prod" = "HVM domU" ]; then
- echo "You are installing to a $MANUF $prod virtual machine."
- echo "Would you like to set up config files to prepare for the"
- echo -n "conversion to PV domU? [No]: "
- response=$(get_response "No" "Yes No Y N")
- if [ "$response" == "yes" ] || [ "$response" == "y" ]; then
- setup_xen_extras
- fi
- fi
-}
-
-progress_indicator () {
- case "$1" in
- start) $vyatta_bindir/progress-indicator $SPID &
- ;;
- *)
- if ! rm /tmp/pi.$SPID 2>/dev/null
- then
- sleep 1
- rm /tmp/pi.$SPID 2>/dev/null
- fi
-
- sleep 1
- echo -n -e "\b"
- ;;
- esac
-}
-
-##### Main
-##
-# turn off any mounted swap files
-turnoffswap
-
-# Print welcome and instructions.
-echo "Welcome to the VyOS install program. This script"
-echo "will walk you through the process of installing the"
-echo "VyOS image to a local hard drive."
-echo
-
-response=''
-while [ -z "$response" ]
-do
- echo -n "Would you like to continue? (Yes/No) [Yes]: "
- response=$(get_response "Yes" "Yes No Y N")
- if [ "$response" == "no" ] || [ "$response" == "n" ]; then
- echo "Ok then. Exiting..."
- exit 1
- fi
-done
-
-# some drives don't show up in /proc/partitions so we need to bootstrap them
-echo -n "Probing drives: "
-progress_indicator start
-probe_drives
-progress_indicator stop
-echo "OK"
-
-INSTALL_METHOD=''
-check_for_old_raid
-if [ -z "$INSTALL_METHOD" ]; then
- check_for_new_raid
-fi
-
-if [ -z "$INSTALL_METHOD" ]; then
- echo "The VyOS image will require a minimum ${ROOT_MIN}MB root."
- echo "Would you like me to try to partition a drive automatically"
- echo "or would you rather partition it manually with parted? If"
- echo "you have already setup your partitions, you may skip this step."
- echo
-
- while [ -z "$INSTALL_METHOD" ]
- do
- echo -n "Partition (Auto/Union/Parted/Skip) [Auto]: "
- INSTALL_METHOD=$(get_response "Auto" "Auto Parted Skip Union A P S U")
- done
-
- echo
-fi
-
-# Unless doing union install, must be from live cd
-if [ $INSTALL_METHOD != "union" -a $INSTALL_METHOD != "u" ] &&
- [ -w /live/image -o ! -d /live/image ]
-then
- echo "install-system can only be run from livecd"
- echo "(except if doing union install)"
- exit 1
-fi
-
-# TODO: Note installs assume an LBA BIOS. So no boot partition currently.
-# also note that we are not creating a swap partition right now.
-if [ "$INSTALL_METHOD" == "parted" ] || [ "$INSTALL_METHOD" == "p" ]; then
- setup_method_manual "parted"
-elif [ "$INSTALL_METHOD" == "skip" ] || [ "$INSTALL_METHOD" == "s" ]; then
- setup_method_manual "skip"
-elif [ "$INSTALL_METHOD" == "auto" ] || [ "$INSTALL_METHOD" == "a" ]; then
- setup_method_auto
-elif [ "$INSTALL_METHOD" == "union" ] || [ "$INSTALL_METHOD" == "u" ]; then
- echo "A union install requires an image partition of at least 250mbs."
- echo "If you want to accomodate more than one image on the partition,"
- echo "it should be larger. Each image is roughly 200mbs. This "
- echo "partition will be the bootable partition for this machine."
- echo
-
- UNION=1
- setup_method_auto
-elif [ "$INSTALL_METHOD" == "vyatta" ]; then
- echo "Automated install..."
- echo "unmounting $INSTALL_DRIVE"
- unmount "$INSTALL_DRIVE"
- echo "deleting partitions on $INSTALL_DRIVE"
- delete_partitions "$INSTALL_DRIVE"
- echo "creating config partition"
- create_partitions "$INSTALL_DRIVE" "$ROOT_PARTITION_SIZE" "$ROOT_OFFSET" "yes"
- # mark data partition as bootable
- echo "Marking /dev/$INSTALL_DRIVE partition 1 as bootable" >> $INSTALL_LOG
- parted -s /dev/$INSTALL_DRIVE set 1 boot on >> $INSTALL_LOG 2>&1
- # Must give partition device time to settle
- sleep 5
-fi
-
-# Install the root filesystem
-install_root_filesystem "$ROOT_PARTITION"
-
-# Copy the config files
-copy_config "$CONFIG_PARTITION"
-
-# Modify config to match system
-# Assume user wants to keep password from old config
-if [ ! -d /mnt/config ]; then
- # Disable root login
- set_encrypted_password root "*" $rootfsdir$ofrconfdir/config.boot
-
- echo "Enter password for administrator account"
- change_password vyos
-fi
-
-# restore ssh host keys
-copy_sshkeys
-
-# check for xen part images in /var/xen
-setup_xen_partition_images
-
-# Install grub
-install_grub
-
-check_for_xen_extras
-
-if [ -z "$UNION" ]; then
- # Fix up PAM configuration for login so that invalid users are prompted
- # for password
- sed -i 's/requisite[ \t][ \t]*pam_securetty.so/required pam_securetty.so/' $rootfsdir/etc/pam.d/login
-fi
-
-#
-# Only start the mdadm daemon if we have the root filesystem running
-# on a RAID set. Since this script is the only way that the root filesystem
-# ever gets set up, we can do this configuration here.
-#
-MDADM_CONFIG_FILE=$rootfsdir/etc/default/mdadm
-if [ -e $MDADM_CONFIG_FILE ]; then
- if [ ${INSTALL_DRIVE:0:2} = "md" ]; then
- sed -i -e 's/^START_DAEMON.*$/START_DAEMON=true/' \
- -e 's/^AUTOSTART=.*$/AUTOSTART=true/' $MDADM_CONFIG_FILE
- else
- sed -i -e 's/^START_DAEMON.*$/START_DAEMON=false/' \
- -e 's/^AUTOSTART=.*$/AUTOSTART=false/' $MDADM_CONFIG_FILE
- fi
-fi
-
-postinst_root=$rootfsdir
-writable_root=''
-if [ -n "$UNION" ]; then
- # set up root for postinst
- postinst_root=/mnt/postinst_root
- writable_root=$rootfsdir
- version=`dpkg-query --showformat='${Version}' --show vyatta-version`
- rw_dir=$rootfsdir/boot/$version/live-rw
-
- mkdir -p $postinst_root /mnt/squashfs
- mount -o loop,ro -t squashfs \
- $rootfsdir/boot/$version/$version.squashfs /mnt/squashfs
- mount -t unionfs -o noatime,dirs=$rw_dir=rw:/mnt/squashfs=ro unionfs \
- $postinst_root
-
- # handle start-up config file
- mkdir -p $postinst_root/$ofrconfdir
- if [ -f $rootfsdir/$ofrconfdir/config.boot ]; then
- cp -p $rootfsdir/$ofrconfdir/* $postinst_root/$ofrconfdir/
- fi
-
- # set up /var/run
- pi_fstab=$postinst_root/etc/fstab
- if ! grep -q 'tmpfs /var/run ' $pi_fstab >&/dev/null; then
- # replace the fstab. the default one has header that will cause
- # it to be wiped out on live boot.
- echo 'tmpfs /var/run tmpfs nosuid,nodev 0 0' >$pi_fstab
- fi
-fi
-
-# postinst hook
-if [ -e /opt/vyatta/etc/install-system/postinst ]; then
- echo "running post-install script"
- /opt/vyatta/etc/install-system/postinst $postinst_root $writable_root \
- >>$INSTALL_LOG
-fi
-
-if [ -n "$UNION" ]; then
- umount $postinst_root
- umount /mnt/squashfs
-fi
-
-cp $INSTALL_LOG $rootfsdir/install.log
-
-umount $rootfsdir
-
-echo "Done!"
-echo "Done!" >> $INSTALL_LOG
-
-exit 0
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 06:32:22 +0000