vyatta-cfg-system (0.19.49) unstable; urgency=low * Don't set speed duplex twice * Remove flag file at end of transaction * Speed/duplex setup improvements -- Stephen Hemminger Fri, 11 Mar 2011 14:56:40 -0800 vyatta-cfg-system (0.19.48) unstable; urgency=low [ Stephen Hemminger ] * Fix typo in domain name regex [ Michael Larson ] * fix for bug 6081. Warning, but allow commit to proceed if duplicate address is found. -- Michael Larson Thu, 10 Mar 2011 10:53:58 -0800 vyatta-cfg-system (0.19.47) unstable; urgency=low * Test for ipv6 blacklist when configuring SNMP -- Stephen Hemminger Tue, 08 Mar 2011 09:49:14 -0800 vyatta-cfg-system (0.19.46) unstable; urgency=low * Fix SNMP ifAlias for more than 10 devices -- Stephen Hemminger Mon, 07 Mar 2011 16:13:26 -0800 vyatta-cfg-system (0.19.45) unstable; urgency=low * Fix network name scan for wireless -- Stephen Hemminger Thu, 03 Mar 2011 15:33:17 -0800 vyatta-cfg-system (0.19.44) unstable; urgency=low [ Stephen Hemminger ] * Fix script to handle more than 10 interfaces [ John Southworth ] * Bugfix 5491: Allow tunnel parameters to be changed on a preconfigured tunnel -- John Southworth Thu, 03 Mar 2011 11:38:19 -0600 vyatta-cfg-system (0.19.43) unstable; urgency=low * Warn if attempting to force mask on multiqueue NIC -- Stephen Hemminger Tue, 01 Mar 2011 11:25:55 -0800 vyatta-cfg-system (0.19.42) unstable; urgency=low * Workaround Xen NIC address -- Stephen Hemminger Fri, 25 Feb 2011 11:23:30 -0800 vyatta-cfg-system (0.19.41) unstable; urgency=low * Increase upper limit of IPV6 route table * Handle Vmware mulitqueue naming convention * Don't set irq affinity if device is disabled * Validate domain and host name * Change where ipv6 route table size is increased -- Stephen Hemminger Fri, 25 Feb 2011 10:38:17 -0800 vyatta-cfg-system (0.19.40) unstable; urgency=low * Use standard mechanism to start/stop snmp * Handle case of device with no active IRQ -- Stephen Hemminger Tue, 22 Feb 2011 10:07:39 -0800 vyatta-cfg-system (0.19.39) unstable; urgency=low * Fix syslog not reloading properly after changing the log level -- John Southworth Mon, 07 Feb 2011 14:24:31 -0600 vyatta-cfg-system (0.19.38) unstable; urgency=low * Bugfix 6773: Spread load of single-queue NICs across all CPUs. -- Bob Gilligan Thu, 03 Feb 2011 00:30:03 -0800 vyatta-cfg-system (0.19.37) unstable; urgency=low [ Mohit Mehta ] * Fix Bug 6696 Internal error for release/renew dhcp interface under op mode [ Robert Bays ] * Fix grammar error in help string. [ Bob Gilligan ] * Bugfix 6156: Allow time for renaming to complete before running biosdevname -- Bob Gilligan Tue, 01 Feb 2011 10:52:49 -0800 vyatta-cfg-system (0.19.36) unstable; urgency=low [ Robert Bays ] * Fix grammar error in help string. [ Mohit Mehta ] * use val_help to present valid info for node -- Mohit Mehta Mon, 31 Jan 2011 12:56:34 -0800 vyatta-cfg-system (0.19.35) unstable; urgency=low * Fix Bug 6696 Internal error for release/renew dhcp interface under op mode -- Mohit Mehta Thu, 27 Jan 2011 13:54:04 -0800 vyatta-cfg-system (0.19.34) unstable; urgency=low [ Stephen Hemminger ] * Pass interface name correctly when deleting dhcpv6 [ Stig Thormodsrud ] * Fix 6501: "clear vrrp master interface group " doesnt work with sync groups. [ Stephen Hemminger ] * Rearrange priority for pseudo-ethernet * Rearrange priority for pseudo-ethernet [ Stig Thormodsrud ] * Fix vrrp duplicate generation of last sync-group entry. -- Stig Thormodsrud Wed, 26 Jan 2011 15:43:08 -0800 vyatta-cfg-system (0.19.33) unstable; urgency=low [ Stephen Hemminger ] * Revert "Add debug logging." * Add logging to coldplug * Add more debug output * Don't fail if config.boot does not exist * Pass interface name correctly when deleting dhcpv6 [ Stig Thormodsrud ] * Fix 6501: "clear vrrp master interface group " doesnt work with sync groups. -- Stig Thormodsrud Tue, 25 Jan 2011 11:14:33 -0800 vyatta-cfg-system (0.19.32) unstable; urgency=low [ Stephen Hemminger ] * Change for rsyslog reload [ Bob Gilligan ] * Add debug logging. -- Bob Gilligan Thu, 20 Jan 2011 22:25:40 -0800 vyatta-cfg-system (0.19.31) unstable; urgency=low * Remove call to tshark during vrrp state transition. -- Stig Thormodsrud Thu, 20 Jan 2011 18:18:26 -0800 vyatta-cfg-system (0.19.30) unstable; urgency=low [ Bob Gilligan ] * Bugfix 6684: Don't delete wanpipe config files. * Bugfix 6156: Policy must be given on command line. * Bugfix 6668: Check to see if log files need rotation hourly. * Bugfix 6687: Need to explicitly specify the RAID metadata version number. * Bugfix 6684: Don't delete wanpipe config files. [ Stephen Hemminger ] * Cleanup old net-rules on upgrade [ Bob Gilligan ] -- Bob Gilligan Wed, 19 Jan 2011 20:10:16 -0800 vyatta-cfg-system (0.19.29) unstable; urgency=low * Bugfix 6687: Need to explicitly specify the RAID metadata version number. -- Bob Gilligan Mon, 17 Jan 2011 23:05:43 -0800 vyatta-cfg-system (0.19.28) unstable; urgency=low * Bugfix 6668: Check to see if log files need rotation hourly. -- Bob Gilligan Mon, 17 Jan 2011 19:47:35 -0800 vyatta-cfg-system (0.19.27) unstable; urgency=low [ Stephen Hemminger ] * Change priority of bonding device address [ Bob Gilligan ] * Bugfix 6156: Policy must be given on command line. -- Bob Gilligan Sun, 16 Jan 2011 23:06:37 -0800 vyatta-cfg-system (0.19.26) unstable; urgency=low [ Stephen Hemminger ] * Fix check for broadcast address [ Mohit Mehta ] * Fix Bug 6599 ha_logd starting up by default * skip 'new branch' commit from mendocino when using merge-branch -- Mohit Mehta Tue, 04 Jan 2011 17:50:17 -0800 vyatta-cfg-system (0.19.25) unstable; urgency=low * new branch -- An-Cheng Huang Tue, 28 Dec 2010 13:47:51 -0800 vyatta-cfg-system (0.19.24) unstable; urgency=low * Add more error recovery and disk space checking. -- Bob Gilligan Wed, 22 Dec 2010 02:34:19 -0800 vyatta-cfg-system (0.19.23) unstable; urgency=low * Affinity script was failing to configure some queues of multi-queue NICs. -- Bob Gilligan Wed, 22 Dec 2010 01:23:08 -0800 vyatta-cfg-system (0.19.22) unstable; urgency=low * Add path to SSH V1 host key to config -- Stephen Hemminger Fri, 17 Dec 2010 11:23:31 -0800 vyatta-cfg-system (0.19.21) unstable; urgency=low * Don't regenerate ssh v1 key * Add checking of protocol-version value * Fix help for name-server -- Stephen Hemminger Thu, 16 Dec 2010 13:20:55 -0800 vyatta-cfg-system (0.19.20) unstable; urgency=low * Fix 6554: clear vrrp master tab completion results in cli api error -- Stig Thormodsrud Fri, 10 Dec 2010 18:51:36 -0800 vyatta-cfg-system (0.19.19) unstable; urgency=low * Fix 6453: After configuring VRRP on interface, VRRP is not active until VRRP is manually restared with "restart vrrp" command. -- Stig Thormodsrud Fri, 10 Dec 2010 17:27:03 -0800 vyatta-cfg-system (0.19.18) unstable; urgency=low * Fix update of serial speed on all grub lines -- Stephen Hemminger Fri, 10 Dec 2010 14:54:00 -0800 vyatta-cfg-system (0.19.17) unstable; urgency=low * Allow telnet and ssh to start before routing protocols -- Stephen Hemminger Mon, 06 Dec 2010 17:13:11 -0800 vyatta-cfg-system (0.19.16) unstable; urgency=low * Fix check for unspecified IPv6 address * Move is_local_address to common code * Allow Ipv6 addresses in resolv.conf * Move touch() perl to Vyatta::File -- Stephen Hemminger Mon, 06 Dec 2010 16:39:57 -0800 vyatta-cfg-system (0.19.15) unstable; urgency=low * Set up commit-revisions if configured after init-floppy. -- Stig Thormodsrud Sat, 04 Dec 2010 13:39:09 -0800 vyatta-cfg-system (0.19.14) unstable; urgency=low * Allow configuring console speed etc * Allow more serial console lines * Block accidental use of virtual consoles * Mark the Vyatta specific section of inittab -- Stephen Hemminger Thu, 02 Dec 2010 17:17:26 -0800 vyatta-cfg-system (0.19.13) unstable; urgency=low * Cleanup leftover ipv6_no_fwd files * Set group ownership and permissions on /var/run/vyatta * Fix delete of mac address on bonding interface -- Stephen Hemminger Thu, 02 Dec 2010 13:30:48 -0800 vyatta-cfg-system (0.19.12) unstable; urgency=low * Speed up install-system progress bar -- Stephen Hemminger Wed, 01 Dec 2010 15:26:53 -0800 vyatta-cfg-system (0.19.11) unstable; urgency=low * Fix dhcpv6 client script -- Stephen Hemminger Tue, 30 Nov 2010 14:21:39 -0800 vyatta-cfg-system (0.19.10) unstable; urgency=low * Add dhcpv6 options for all interfaces that support DHCP * Add duplicate address check on commit * Remove old code for address insertion/deletion/validation -- Stephen Hemminger Tue, 30 Nov 2010 14:09:42 -0800 vyatta-cfg-system (0.19.9) unstable; urgency=low * Fix interface scanning on boot - allow more mac addresses * Automatically configure physical device for wireless interfaces -- Stephen Hemminger Mon, 29 Nov 2010 17:16:45 -0800 vyatta-cfg-system (0.19.8) unstable; urgency=low * Fix use of undefined in comparison -- Stephen Hemminger Mon, 29 Nov 2010 16:06:03 -0800 vyatta-cfg-system (0.19.7) unstable; urgency=low * Remove module rather than deleting link device -- Stephen Hemminger Mon, 29 Nov 2010 12:23:53 -0800 vyatta-cfg-system (0.19.6) unstable; urgency=low * Don't let biosdevname look at wireless devices -- Stephen Hemminger Wed, 24 Nov 2010 16:50:26 -0800 vyatta-cfg-system (0.19.5) unstable; urgency=low * Fix tunnel cleanup script -- Stephen Hemminger Wed, 24 Nov 2010 12:24:52 -0800 vyatta-cfg-system (0.19.4) unstable; urgency=low * Add cpufrequtils default config file * Fix range checking on bridge port priority is limited to 0-63 * Revert "Don't need to rename vlan devices" -- Stephen Hemminger Wed, 24 Nov 2010 09:38:45 -0800 vyatta-cfg-system (0.19.3) unstable; urgency=low [ Bob Gilligan ] * Bugfix 6457: Don't ask the question if you're not going to like the answer. * 0.19.2 [ Stephen Hemminger ] * Don't allow zero for VRRP priority or VRID * Bonding should have same VRRP rules as Ethernet * typo in tunnel cleanup * Don't need to rename vlan devices * Make scripts executable * Improve performance of syntax checks for vrrp address * Use sockets to check if IP address is local * Use unlink rather than system() to remove files in keepalive script * Remove check function from keepalived perl script -- Stephen Hemminger Tue, 23 Nov 2010 19:03:23 -0800 vyatta-cfg-system (0.19.2) unstable; urgency=low [ Bob Gilligan ] * Bugfix 6457: Don't ask the question if you're not going to like the answer. [ Stephen Hemminger ] * Don't allow zero for VRRP priority or VRID * Bonding should have same VRRP rules as Ethernet * typo in tunnel cleanup [ Bob Gilligan ] -- Bob Gilligan Sun, 21 Nov 2010 08:00:56 -0800 vyatta-cfg-system (0.19.1) unstable; urgency=low * Cleanup tunnel slave device on last delete * Add utilities checking addresses * Replace perl address validation with utility * Use script vyatta-address to set interface * Optimize lookup of local ip on tunnels -- Stephen Hemminger Mon, 22 Nov 2010 12:57:15 -0800 vyatta-cfg-system (0.18.21) unstable; urgency=low * Bugfix 6101: Make a syslog record when a new image is added. -- Bob Gilligan Sun, 21 Nov 2010 03:08:06 -0800 vyatta-cfg-system (0.18.20) unstable; urgency=low * Bring tunnel down before deleting * When removing tunnel, remove encapsulation device -- Stephen Hemminger Thu, 18 Nov 2010 16:45:22 -0800 vyatta-cfg-system (0.18.19) unstable; urgency=low * Add more checks for bridge/bond conflicts * Add syntax check for bridge interface name * Fix help for syslog -- Stephen Hemminger Thu, 18 Nov 2010 13:14:48 -0800 vyatta-cfg-system (0.18.18) unstable; urgency=low * Add check for adding bridge-group and bond-group when setting address * Add check for interface address before putting it in bonded device * Cleanup bridge port management * Cleanup bond-group syntax and commit checks -- Stephen Hemminger Wed, 17 Nov 2010 20:46:53 -0800 vyatta-cfg-system (0.18.17) unstable; urgency=low * Allow longer domain-name values * Remove useless comment * Add address checks to bonding -- Stephen Hemminger Wed, 17 Nov 2010 15:58:01 -0800 vyatta-cfg-system (0.18.16) unstable; urgency=low * Add option to disable host validation (DNS) for SSH * Add ability to configure SSH listen address * Add ability to configure telnet listen-addres * Need to restart telnet if port or listen-address changes -- Stephen Hemminger Tue, 16 Nov 2010 16:25:44 -0800 vyatta-cfg-system (0.18.15) unstable; urgency=low * update call to error location api. -- Michael Larson Tue, 16 Nov 2010 09:34:32 -0800 vyatta-cfg-system (0.18.14) unstable; urgency=low * Restore IRQ affinity when device is renabled -- Stephen Hemminger Mon, 15 Nov 2010 13:56:33 -0800 vyatta-cfg-system (0.18.13) unstable; urgency=low * Add hw-id for existing interfaces to config -- Stephen Hemminger Mon, 15 Nov 2010 13:14:04 -0800 vyatta-cfg-system (0.18.12) unstable; urgency=low * Move cleanup of serial interface into rl-system.init -- Stephen Hemminger Mon, 15 Nov 2010 10:43:27 -0800 vyatta-cfg-system (0.18.11) unstable; urgency=low * Add more checks on VLAN * Change mode on all executable scripts * remove deprecated linda override * New IRQ affinity script and RPS support * Fix irq-affinity for special cases * Fix is_supported_speed matching -- Stephen Hemminger Fri, 12 Nov 2010 14:51:08 -0800 vyatta-cfg-system (0.18.10) unstable; urgency=low * Fix path to ethtool * Check speed and duplex settings on Ethernet interfaces * Don't produce warnings for drivers that don't support ethtool -- Stephen Hemminger Mon, 08 Nov 2010 15:13:17 -0800 vyatta-cfg-system (0.18.9) unstable; urgency=low * Add special case for single-queue NICs using multi-queue naming format. -- Bob Gilligan Thu, 04 Nov 2010 12:26:39 -0700 vyatta-cfg-system (0.18.8) unstable; urgency=low * Fix to show ifAlias of loopback -- Stephen Hemminger Wed, 03 Nov 2010 13:39:06 -0700 vyatta-cfg-system (0.18.7) unstable; urgency=low * Remove non-functional commit test on mtu of vif -- Stephen Hemminger Tue, 02 Nov 2010 13:06:34 -0700 vyatta-cfg-system (0.18.6) unstable; urgency=low * Allow setting MTU of VIF * Priority change for bridging a bonded vif * Priority change for bridging a bonded vif -- Stephen Hemminger Tue, 02 Nov 2010 08:41:59 -0700 vyatta-cfg-system (0.18.5) unstable; urgency=low * Fix goto in vyatta-net.rules * Add net-snmp ifAlias hook -- Stephen Hemminger Fri, 29 Oct 2010 11:33:08 -0700 vyatta-cfg-system (0.18.4) unstable; urgency=low * fix for bug 6388 -- An-Cheng Huang Thu, 28 Oct 2010 18:14:26 -0700 vyatta-cfg-system (0.18.3) unstable; urgency=low * Don't rename vif and other non-driver interfaces -- Stephen Hemminger Wed, 27 Oct 2010 11:08:12 -0700 vyatta-cfg-system (0.18.2) unstable; urgency=low * Fix set on uniproc machine -- Stephen Hemminger Wed, 27 Oct 2010 10:53:42 -0700 vyatta-cfg-system (0.18.1) unstable; urgency=low * IRQ affinity update * Update dependency on vyatta-cfg * Add irqaffin to Makefile * Fix overwrite of irq commands -- Stephen Hemminger Wed, 27 Oct 2010 10:47:46 -0700 vyatta-cfg-system (0.17.128) unstable; urgency=low * Use pgrep to check if ntp running -- Stephen Hemminger Tue, 26 Oct 2010 20:37:46 -0700 vyatta-cfg-system (0.17.127) unstable; urgency=low * Move config-mgmt to it's own package. -- Stig Thormodsrud Tue, 26 Oct 2010 14:48:23 -0700 vyatta-cfg-system (0.17.126) unstable; urgency=low * Change vyatta_net_name into a perl script * Sort the interface names when adding -- Stephen Hemminger Tue, 26 Oct 2010 14:35:45 -0700 vyatta-cfg-system (0.17.125) unstable; urgency=low * Fix bond hash policy * Fix typo in hash_policy * Wait to bring up bond interface until end * Add bonding ARP monitor parmeters -- Stephen Hemminger Mon, 25 Oct 2010 10:20:08 -0700 vyatta-cfg-system (0.17.124) unstable; urgency=low * Fix commit-uri bug. -- Stig Thormodsrud Sat, 23 Oct 2010 12:14:47 -0700 vyatta-cfg-system (0.17.123) unstable; urgency=low * Fist pass at adding archive to uri on commit. -- Stig Thormodsrud Fri, 22 Oct 2010 17:38:43 -0700 vyatta-cfg-system (0.17.122) unstable; urgency=low * Make empty config files readable -- Stephen Hemminger Wed, 20 Oct 2010 17:34:06 -0700 vyatta-cfg-system (0.17.121) unstable; urgency=low [ Stephen Hemminger ] * keep serial console until configuration is working [ An-Cheng Huang ] -- An-Cheng Huang Tue, 19 Oct 2010 18:24:47 -0700 vyatta-cfg-system (0.17.120) unstable; urgency=low * Neuter the serial console config until it works -- Stephen Hemminger Mon, 18 Oct 2010 12:00:29 -0700 vyatta-cfg-system (0.17.119) unstable; urgency=low * Fix syntax error in vyatta_update_console.pl. -- Stig Thormodsrud Sat, 16 Oct 2010 10:04:44 -0700 vyatta-cfg-system (0.17.118) unstable; urgency=low * Add ability to set transmit hash policy * Handle error cases on console update * 0.17.117 -- Stephen Hemminger Fri, 15 Oct 2010 15:56:56 -0700 vyatta-cfg-system (0.17.117) unstable; urgency=low [ root ] * change to accessor for outputerror [ Stephen Hemminger ] -- Stephen Hemminger Fri, 15 Oct 2010 15:55:50 -0700 vyatta-cfg-system (0.17.116) unstable; urgency=low * Add ability to run modem getty -- Stephen Hemminger Fri, 15 Oct 2010 10:35:46 -0700 vyatta-cfg-system (0.17.115) unstable; urgency=low * Change speed in grub config as well -- Stephen Hemminger Thu, 14 Oct 2010 17:23:31 -0700 vyatta-cfg-system (0.17.114) unstable; urgency=low * Add better control over console screen blanker * Need sudo to change console settings -- Stephen Hemminger Thu, 14 Oct 2010 16:58:42 -0700 vyatta-cfg-system (0.17.113) unstable; urgency=low * Turn off screen blanking on console * Need to be root to write /etc/inittab * Restore old motd and login banner * Remove serial console before config -- Stephen Hemminger Thu, 14 Oct 2010 16:18:35 -0700 vyatta-cfg-system (0.17.112) unstable; urgency=low * Add support for setting up serial console ports * Fix email address in changelog * Fix regexp used for disabling up serial with Xen * Fix serial console setup functions * Change syntax for console config -- Stephen Hemminger Thu, 14 Oct 2010 15:08:42 -0700 vyatta-cfg-system (0.17.111) unstable; urgency=low * Revise new ntp server config -- Stephen Hemminger Wed, 13 Oct 2010 18:12:44 -0700 vyatta-cfg-system (0.17.110) unstable; urgency=low * Migrate NTP server to services ntp -- Stephen Hemminger Wed, 13 Oct 2010 18:04:09 -0700 vyatta-cfg-system (0.17.109) unstable; urgency=low * Add default vyatta rsyslog config rules -- Stephen Hemminger Mon, 11 Oct 2010 12:22:30 -0700 vyatta-cfg-system (0.17.108) unstable; urgency=low * Add LSB support information to telnetd.init * Add ubuntu changes to rsyslog -- Stephen Hemminger Sun, 10 Oct 2010 11:42:35 -0700 vyatta-cfg-system (0.17.107) unstable; urgency=low [ root ] * modified reference error location. [ Stephen Hemminger ] * Check if SNMP is running before starting -- Stephen Hemminger Sat, 09 Oct 2010 15:51:50 -0700 vyatta-cfg-system (0.17.106) unstable; urgency=low * use new error reference location method -- root Fri, 08 Oct 2010 12:13:11 -0700 vyatta-cfg-system (0.17.105) unstable; urgency=low * Convert from syslog to rsyslog -- Stephen Hemminger Fri, 08 Oct 2010 17:12:41 -0700 vyatta-cfg-system (0.17.104) unstable; urgency=low [ Stephen Hemminger ] * Add dependency on Squeeze version of udev * Change udev network naming to be more cooperative * Put udev rules in /lib/udev [ Mohit Mehta ] * moved code for zones to vyatta-zone package -- Mohit Mehta Thu, 07 Oct 2010 19:16:02 -0700 vyatta-cfg-system (0.17.103) unstable; urgency=low * Update hwclockfirst fixup for Squeeze * Fix sysklog dependency * List rsyslog package dependency -- Stephen Hemminger Thu, 07 Oct 2010 11:40:06 -0700 vyatta-cfg-system (0.17.102) unstable; urgency=low * * update count_iptables module usage -- Mohit Mehta Tue, 21 Sep 2010 21:15:28 -0700 vyatta-cfg-system (0.17.101) unstable; urgency=low * * use count_iptables_rule from MISC module -- Mohit Mehta Tue, 21 Sep 2010 17:37:14 -0700 vyatta-cfg-system (0.17.100) unstable; urgency=low * Bugfix 6210: Fix up case where login section is missing from config file. -- Bob Gilligan Sat, 18 Sep 2010 01:56:15 -0700 vyatta-cfg-system (0.17.99) unstable; urgency=low * fix init-floppy for squeeze -- An-Cheng Huang Mon, 20 Sep 2010 15:23:36 -0700 vyatta-cfg-system (0.17.98) unstable; urgency=low * Bugfix 6210: Fix parsing of config file -- Bob Gilligan Fri, 17 Sep 2010 22:38:07 -0700 vyatta-cfg-system (0.17.97) unstable; urgency=low * partial fix for bug 6152 * more fixes for bug 6152 -- An-Cheng Huang Mon, 13 Sep 2010 18:53:48 -0700 vyatta-cfg-system (0.17.96) unstable; urgency=low * rename pre-mendocino ipv6 modprobe files to add .conf suffix -- Mohit Mehta Mon, 13 Sep 2010 15:49:40 -0700 vyatta-cfg-system (0.17.95) unstable; urgency=low * Enforce username length restriction * Fix quoting issues with conversion to lower case * Fix quoting of shell -z -- Stephen Hemminger Wed, 08 Sep 2010 09:41:40 -0700 vyatta-cfg-system (0.17.94) unstable; urgency=low * Change modprobe.d files to .conf * Update to current udev * Update sound blacklist fix -- Stephen Hemminger Tue, 07 Sep 2010 09:55:34 -0700 vyatta-cfg-system (0.17.93) unstable; urgency=low [ Stephen Hemminger ] * Remove ifDescr override [ An-Cheng Huang ] * fix squeeze paths -- An-Cheng Huang Fri, 03 Sep 2010 14:44:40 -0700 vyatta-cfg-system (0.17.92) unstable; urgency=low * Bugfix 5499: Fix restrictions on IPv6 addresses. -- Bob Gilligan Tue, 31 Aug 2010 02:58:11 -0700 vyatta-cfg-system (0.17.91) unstable; urgency=low [ Stephen Hemminger ] * Add dependency on libcap2-bin [ Bob Gilligan ] * Bugfix 6085: Use "-x" flag instead of "-r" to kill the old dhclient process -- Bob Gilligan Mon, 30 Aug 2010 02:33:54 -0700 vyatta-cfg-system (0.17.90) unstable; urgency=low * Add checking of port range * Add check for port range on SNMP listen port value * Generate interface description -- Stephen Hemminger Mon, 23 Aug 2010 15:03:23 -0700 vyatta-cfg-system (0.17.89) unstable; urgency=low * update help text to use val_help -- An-Cheng Huang Tue, 17 Aug 2010 15:31:11 -0700 vyatta-cfg-system (0.17.88) unstable; urgency=low * Don't delete existing root password -- Stephen Hemminger Tue, 17 Aug 2010 15:22:55 -0700 vyatta-cfg-system (0.17.87) unstable; urgency=low * Add vrrp parameters to transition script. -- Stig Thormodsrud Tue, 17 Aug 2010 11:59:45 -0700 vyatta-cfg-system (0.17.86) unstable; urgency=low * remove more low-level config dir usages -- An-Cheng Huang Mon, 16 Aug 2010 18:52:07 -0700 vyatta-cfg-system (0.17.85) unstable; urgency=low * remove low-level config dir usage -- An-Cheng Huang Mon, 16 Aug 2010 18:15:01 -0700 vyatta-cfg-system (0.17.84) unstable; urgency=low * remove low-level config dir usage -- An-Cheng Huang Mon, 16 Aug 2010 15:47:03 -0700 vyatta-cfg-system (0.17.83) unstable; urgency=low * remove "node.val" usages -- An-Cheng Huang Thu, 12 Aug 2010 14:13:07 -0700 vyatta-cfg-system (0.17.82) unstable; urgency=low * use listEffectiveNodes() from new API -- An-Cheng Huang Mon, 02 Aug 2010 17:17:30 -0700 vyatta-cfg-system (0.17.81) unstable; urgency=low * Bugfix 5964: Eliminate unnecessary version check. -- Bob Gilligan Mon, 02 Aug 2010 16:38:53 -0700 vyatta-cfg-system (0.17.80) unstable; urgency=low * new API change -- An-Cheng Huang Mon, 02 Aug 2010 15:45:23 -0700 vyatta-cfg-system (0.17.79) unstable; urgency=low * add comments and missing function -- An-Cheng Huang Fri, 30 Jul 2010 18:13:00 -0700 vyatta-cfg-system (0.17.78) unstable; urgency=low * Bugfix 5711: Don't allow special characters in image names. -- Bob Gilligan Wed, 28 Jul 2010 02:47:32 -0700 vyatta-cfg-system (0.17.77) unstable; urgency=low * new API changes -- An-Cheng Huang Fri, 30 Jul 2010 17:26:20 -0700 vyatta-cfg-system (0.17.76) unstable; urgency=low [ Stephen Hemminger ] * Change ranges for bridge parameters * Fix typo in last change [ Bob Gilligan ] * Bugfix 5929: Preserve SSH host keys during image installation. -- Bob Gilligan Tue, 27 Jul 2010 19:47:45 -0700 vyatta-cfg-system (0.17.75) unstable; urgency=low * UNRELEASED -- An-Cheng Huang Thu, 22 Jul 2010 17:23:36 -0700 vyatta-cfg-system (0.17.74) unstable; urgency=low * More fixes to standalone password reset -- Stephen Hemminger Thu, 22 Jul 2010 15:09:01 -0700 vyatta-cfg-system (0.17.73) unstable; urgency=low [ Stephen Hemminger ] * Make standalone password recovery more robust [ An-Cheng Huang ] * remove unused options -- An-Cheng Huang Thu, 22 Jul 2010 12:13:05 -0700 vyatta-cfg-system (0.17.72) unstable; urgency=low * Move input interface over to Qos package -- Stephen Hemminger Wed, 21 Jul 2010 17:46:50 -0700 vyatta-cfg-system (0.17.71) unstable; urgency=low * Use pgrep to count number of matching processes * Use val_help: for interface name help * Use expression to validate VRRP password * Add proxy-arp over bonding * Fix help completion text * Fix formatting of static-host mapping val help * Add completion for text fields with limited values * Fix completion on multi-type node -- Stephen Hemminger Wed, 21 Jul 2010 15:45:39 -0700 vyatta-cfg-system (0.17.70) unstable; urgency=low [ Stephen Hemminger ] * Fix language in help text for loadkey * Use val_help: for Ethernet interface parameters * bonding vif val_help * Loopback address node cleanup * Convert tunnel parameters to new help format * Convert public-keys help to new format * Revise static-host-mapping * Use val_help: features to format better * Convert syslog commands to new CLI help style [ An-Cheng Huang ] * fix typo, val_help, etc. [ Stephen Hemminger ] * Convert VRRP preempt to bool * Convert VRRP to new CLI help style [ Bob Gilligan ] * Bugfix 5512: Have grub.cfg use the vmlinuz and initrd.img symlinks if available -- Bob Gilligan Mon, 19 Jul 2010 17:45:16 -0700 vyatta-cfg-system (0.17.69) unstable; urgency=low [ Stephen Hemminger ] * Remove verbs from all help messages * Covert bonding mode to val_help * Use val_help: for interface MTU nodes * Bridge parameter node update * Use val_help in zone-policy * Fix old invalid email addresses in changelog [ An-Cheng Huang ] * fix typo [ Stephen Hemminger ] -- Stephen Hemminger Mon, 19 Jul 2010 11:08:12 -0700 vyatta-cfg-system (0.17.68) unstable; urgency=low * Add syntax validation for bridge STP parameters * Use val_help: for address nodes -- Stephen Hemminger Fri, 16 Jul 2010 17:30:20 -0700 vyatta-cfg-system (0.17.67) unstable; urgency=low * Bugfix 5557: Properly update initrd symlink. -- Bob Gilligan Wed, 14 Jul 2010 15:01:20 -0700 vyatta-cfg-system (0.17.66) unstable; urgency=low * Enable putting core files /var/core -- Stephen Hemminger Wed, 14 Jul 2010 16:25:22 -0700 vyatta-cfg-system (0.17.65) unstable; urgency=low * Bugfix 5845, 5557: Install vyatta-update-grub.pl in /opt/vyatta/sbin. -- Bob Gilligan Wed, 14 Jul 2010 15:45:28 -0700 vyatta-cfg-system (0.17.64) unstable; urgency=low * Bugfix 5557: Add script to help update grub after full upgrade. * Move vyatta-update-grub.pl to the vyatta-base package. * Revert "Move vyatta-update-grub.pl to the vyatta-base package." * Select kernel to boot based on current running kernel type. -- Bob Gilligan Wed, 14 Jul 2010 11:12:37 -0700 vyatta-cfg-system (0.17.63) unstable; urgency=low * Fix install-system if not saving old image config -- Stephen Hemminger Thu, 08 Jul 2010 09:44:16 -0700 vyatta-cfg-system (0.17.62) unstable; urgency=low * Don't need explict sync in init-floppy * Change user name validation * Allow incorrect user to be deleted -- Stephen Hemminger Tue, 06 Jul 2010 19:14:50 -0700 vyatta-cfg-system (0.17.61) unstable; urgency=low * Corrected the fix for bug 5408. -- Deepti Kulkarni Tue, 06 Jul 2010 16:40:24 +0000 vyatta-cfg-system (0.17.60) unstable; urgency=low * Update failover-mechanism sync-group CLI path and add -- Mohit Mehta Thu, 01 Jul 2010 17:40:10 -0700 vyatta-cfg-system (0.17.59) unstable; urgency=low * Fix 5675: clearing vrrp master for an interface group removes sync- group config -- Stig Thormodsrud Thu, 01 Jul 2010 14:11:18 -0700 vyatta-cfg-system (0.17.58) unstable; urgency=low * Touch file before setting capability -- Stephen Hemminger Thu, 01 Jul 2010 13:37:07 -0700 vyatta-cfg-system (0.17.57) unstable; urgency=low [ root ] * fix for bug 5408. [ Deepti Kulkarni ] * Revert "fix for bug 5408." * fix for bug 5408. -- Deepti Kulkarni Thu, 01 Jul 2010 16:53:34 +0000 vyatta-cfg-system (0.17.56) unstable; urgency=low [ Stephen Hemminger ] * Remove sudo from tunnel command * Fix path to ipset [ Michael Larson ] * fix for bug 5663 -- Michael Larson Mon, 21 Jun 2010 11:09:56 -0700 vyatta-cfg-system (0.17.55) unstable; urgency=low * initial support for gre-bridge tunnels. -- Robert Bays Thu, 17 Jun 2010 23:33:45 -0700 vyatta-cfg-system (0.17.54) unstable; urgency=low * Remove sudo from ip command * Remove unnecessary :expression: syntax * Remove sudo from brctl * Remove capability from ping * Don't need audit write on vbash -- Stephen Hemminger Thu, 17 Jun 2010 14:46:35 -0700 vyatta-cfg-system (0.17.53) unstable; urgency=low * * make vrrp work with conntrack-sync * * perltidy vyatta-keepalived.pl -- Mohit Mehta Wed, 09 Jun 2010 15:01:47 -0700 vyatta-cfg-system (0.17.52) unstable; urgency=low * Add skip option to vyatta-interfaces -- Stephen Hemminger Mon, 07 Jun 2010 16:28:13 -0700 vyatta-cfg-system (0.17.51) unstable; urgency=low * Using "send dhcp6.oro" is no longer required in config file. -- Bob Gilligan Sun, 30 May 2010 07:14:32 -0700 vyatta-cfg-system (0.17.50) unstable; urgency=low * Fix use of bareword file handles * Set file capability attributes * Add pam_cap capability configuration -- Stephen Hemminger Fri, 04 Jun 2010 14:10:09 -0700 vyatta-cfg-system (0.17.49) unstable; urgency=low * move list functions to vrrp perl module so other scripts can use it as well -- Mohit Mehta Thu, 03 Jun 2010 16:32:05 -0700 vyatta-cfg-system (0.17.48) unstable; urgency=low * fix for bug 5656 -- An-Cheng Huang Thu, 03 Jun 2010 14:55:46 -0700 vyatta-cfg-system (0.17.47) unstable; urgency=low * Fix 5521: Cannot Delete vif with vrrp configured. -- Stig Thormodsrud Tue, 01 Jun 2010 15:24:45 -0700 vyatta-cfg-system (0.17.46) unstable; urgency=low * Move DHCPv6 client configuration to this package and restructre parameters. -- Bob Gilligan Wed, 26 May 2010 16:12:45 -0700 vyatta-cfg-system (0.17.45) unstable; urgency=low * Don't enable PAM Radius by default -- Stephen Hemminger Mon, 24 May 2010 10:46:08 -0700 vyatta-cfg-system (0.17.44) unstable; urgency=low * don't start conntrackd itself -- Mohit Mehta Thu, 20 May 2010 19:29:10 -0700 vyatta-cfg-system (0.17.43) unstable; urgency=low * Add enable-proxy-arp to vif interface. -- Stig Thormodsrud Wed, 19 May 2010 20:16:12 -0700 vyatta-cfg-system (0.17.42) unstable; urgency=low * Change SNMP community handling * Fix syntax of default listen address -- Stephen Hemminger Fri, 14 May 2010 11:01:48 -0700 vyatta-cfg-system (0.17.41) unstable; urgency=low * Revert "Snmp Ipv6 support" * Better version of SNMP IPv6 support * Allow configuring/restricting SNMP listen address -- Stephen Hemminger Wed, 12 May 2010 21:02:35 -0700 vyatta-cfg-system (0.17.40) unstable; urgency=low * Snmp Ipv6 support * Show progress bar when copying filesystem -- Stephen Hemminger Wed, 12 May 2010 14:34:54 -0700 vyatta-cfg-system (0.17.39) unstable; urgency=low * Preserve file capablities and attributes during install-system * Preserve file attributes of root files -- Stephen Hemminger Fri, 07 May 2010 15:25:22 -0700 vyatta-cfg-system (0.17.38) unstable; urgency=low * Add code to check digital signature of image files. -- Bob Gilligan Mon, 03 May 2010 17:21:10 -0700 vyatta-cfg-system (0.17.37) unstable; urgency=low * Allow user to name system images when installing them. -- Bob Gilligan Fri, 30 Apr 2010 15:48:57 -0700 vyatta-cfg-system (0.17.36) unstable; urgency=low * Ignore comments in level file * Set capabilities on standard utilities * Make interface help completion strings consistent * Revert "Set capabilities on standard utilities" -- Stephen Hemminger Tue, 27 Apr 2010 15:27:49 -0700 vyatta-cfg-system (0.17.35) unstable; urgency=low * Configure IFB devices earlier in boot -- Stephen Hemminger Fri, 16 Apr 2010 11:35:23 -0700 vyatta-cfg-system (0.17.34) unstable; urgency=low * Rename in0 to ifb0 -- Stephen Hemminger Thu, 15 Apr 2010 13:16:38 -0700 vyatta-cfg-system (0.17.33) unstable; urgency=low * For Bug 5625 Not ready for DNSSEC implementation -- Mohit Mehta Wed, 14 Apr 2010 16:22:44 -0700 vyatta-cfg-system (0.17.32) unstable; urgency=low * increase xen hypervisor heap size -- An-Cheng Huang Fri, 09 Apr 2010 18:35:29 -0700 vyatta-cfg-system (0.17.31) unstable; urgency=low * Add input pseudo-interface configuration -- Stephen Hemminger Tue, 06 Apr 2010 09:27:17 -0700 vyatta-cfg-system (0.17.30) unstable; urgency=low * Use 3 arg open * Use 3 arg open to create pipe * Ignore errors from ethtool when setting speed/duplex -- Stephen Hemminger Mon, 05 Apr 2010 22:20:49 -0700 vyatta-cfg-system (0.17.29) unstable; urgency=low * Fail gracefully if path is unknown -- Stephen Hemminger Mon, 05 Apr 2010 16:17:35 -0700 vyatta-cfg-system (0.17.28) unstable; urgency=low * Improve wording of config info save dialog. -- Bob Gilligan Tue, 30 Mar 2010 12:02:35 -0700 vyatta-cfg-system (0.17.27) unstable; urgency=low * Ignore setting CPU affinity on UP systems * Fix test for UP -- Stephen Hemminger Mon, 29 Mar 2010 16:34:57 -0700 vyatta-cfg-system (0.17.26) unstable; urgency=low * run snmpd as user snmp -- An-Cheng Huang Wed, 24 Mar 2010 19:08:22 -0700 vyatta-cfg-system (0.17.25) unstable; urgency=low * Fix Bug 5487 http redirect url address placed on the router gets blocked by -- Mohit Mehta Wed, 24 Mar 2010 15:31:16 -0700 vyatta-cfg-system (0.17.24) unstable; urgency=low * Fix Bug 5386 L2TP will work only the first time Vyatta is booted -- Mohit Mehta Sat, 20 Mar 2010 22:43:27 -0700 vyatta-cfg-system (0.17.23) unstable; urgency=low [ Michael Larson ] * fixes commit warning when run invoked via the api--getlogin() may return an undefined value as the process is a child process [ Bob Gilligan ] * Bugfix 5449: Maintain "console affinity" when adding a new image. -- Bob Gilligan Thu, 18 Mar 2010 18:03:55 -0700 vyatta-cfg-system (0.17.22) unstable; urgency=low * Remove Radius Server config file on reboot * Handle devices that do not report ethtool -- Stephen Hemminger Wed, 17 Mar 2010 11:29:44 -0700 vyatta-cfg-system (0.17.21) unstable; urgency=low * Make /var/run/vyatta and /var/log/vyatta * Use userdel -f to force removal of user * Better version of forcing user logout -- Stephen Hemminger Mon, 15 Mar 2010 10:45:04 -0700 vyatta-cfg-system (0.17.20) unstable; urgency=low [ Stephen Hemminger ] * Disable SELinux during password reset * Fix case of VGA_LOGO option [ Mohit Mehta ] * * Fix BZ 5334 services start automatically on boot up after upgrade to kenwood [ Stephen Hemminger ] * Run partition editor with script flag to avoid prompting user * Force user process to die -- Stephen Hemminger Fri, 12 Mar 2010 10:01:06 -0800 vyatta-cfg-system (0.17.19) unstable; urgency=low * Bugfix 5021: Make smp_affinity configuration tolerant of failures. -- Bob Gilligan Tue, 09 Mar 2010 15:49:56 -0800 vyatta-cfg-system (0.17.18) unstable; urgency=low [ Stephen Hemminger ] * Set primary interface after bond-group is initialized [ Bob Gilligan ] * Bugfix 5424: Allow image with same version to be added to disk-based install -- Bob Gilligan Tue, 09 Mar 2010 11:08:49 -0800 vyatta-cfg-system (0.17.17) unstable; urgency=low * Use more reliable method for determining system version. -- Bob Gilligan Mon, 08 Mar 2010 17:37:20 -0800 vyatta-cfg-system (0.17.16) unstable; urgency=low * Bugfix 5416: determine system version from version of vyatta-version package -- Bob Gilligan Mon, 08 Mar 2010 16:19:08 -0800 vyatta-cfg-system (0.17.15) unstable; urgency=low * Bugfix 5360: Get name of image from correct source. -- Bob Gilligan Mon, 08 Mar 2010 14:51:58 -0800 vyatta-cfg-system (0.17.14) unstable; urgency=low [ Stephen Hemminger ] * Fixup xl2tpd init during install [ Bob Gilligan ] * Bugfix 5414: Use correct install root reference when copying back SSH keys. -- Bob Gilligan Mon, 08 Mar 2010 14:17:56 -0800 vyatta-cfg-system (0.17.13) unstable; urgency=low * Bugfix 5413: Determine system version from vyatta-version package. -- Bob Gilligan Fri, 05 Mar 2010 13:07:33 -0800 vyatta-cfg-system (0.17.12) unstable; urgency=low * Bugfix 5404: Handle RAID re-sync on image-installed systems. -- Bob Gilligan Wed, 03 Mar 2010 18:09:55 -0800 vyatta-cfg-system (0.17.11) unstable; urgency=low * Bugfix 5377: strict-dad must be applied before interfaces are configured -- Bob Gilligan Mon, 01 Mar 2010 14:19:23 -0800 vyatta-cfg-system (0.17.10) unstable; urgency=low * Bugfix 5217: Don't use the "-#" option to curl. It runs slow on serial ports. -- Bob Gilligan Thu, 25 Feb 2010 11:50:19 -0800 vyatta-cfg-system (0.17.9) unstable; urgency=low * Bugfix 5377: Add parameter to control behavior when DAD fails. -- Bob Gilligan Tue, 23 Feb 2010 15:53:53 -0800 vyatta-cfg-system (0.17.8) unstable; urgency=low [ Stephen Hemminger ] * Handle empty set of public keys [ Stig Thormodsrud ] * Fix 5157: dhcpclient doesn't work when alternative mac address specified on bootup -- Stig Thormodsrud Sun, 21 Feb 2010 20:21:32 -0800 vyatta-cfg-system (0.17.7) unstable; urgency=low * Fix Bug 5064 can't delete bridge group and membership in one commit -- Mohit Mehta Thu, 18 Feb 2010 17:28:54 -0800 vyatta-cfg-system (0.17.6) unstable; urgency=low * UNRELEASED -- An-Cheng Huang Wed, 17 Feb 2010 16:13:35 -0800 vyatta-cfg-system (0.17.5) unstable; urgency=low * Handle DSA keys * Add support for options in keyfile -- Stephen Hemminger Wed, 17 Feb 2010 12:52:02 -0800 vyatta-cfg-system (0.17.4) unstable; urgency=low * Speed up VIF creation * Check current status (not configured value) when enabling vlan device * Use template to do syntax checks on ethernet device name -- Stephen Hemminger Tue, 16 Feb 2010 17:37:10 -0800 vyatta-cfg-system (0.17.3) unstable; urgency=low * Don't allow format strings in snmp-community * Add syntax check for vif name where non-vif expected * Use die function for failures -- Stephen Hemminger Tue, 16 Feb 2010 13:58:55 -0800 vyatta-cfg-system (0.17.2) unstable; urgency=low * Bugfix 5327: Don't try to save config from images with none. -- Bob Gilligan Tue, 16 Feb 2010 11:57:24 -0800 vyatta-cfg-system (0.17.1) unstable; urgency=low * use more specific version before which modprobe files in vyatta-cfg r2b replaced -- Mohit Mehta Fri, 12 Feb 2010 13:53:27 -0800 vyatta-cfg-system (0.16.43) unstable; urgency=low * fix bug 5334 services start automatically on boot up post upgrade to kenwood -- Mohit Mehta Fri, 12 Feb 2010 11:29:49 -0800 vyatta-cfg-system (0.16.42) unstable; urgency=low * Bugfix 5117: Preserve config files from previous image installation. -- Bob Gilligan Thu, 11 Feb 2010 16:06:16 -0800 vyatta-cfg-system (0.16.41) unstable; urgency=low * Fix bug 5325 vyatta-cfg-system fails to upgrade during full-upgrade VC5 to VC6 -- Mohit Mehta Wed, 10 Feb 2010 12:21:52 -0800 vyatta-cfg-system (0.16.40) unstable; urgency=low * Remove vyatta-ofr on upgrade * Remove IPv6 address_flush sysctl -- Stephen Hemminger Tue, 09 Feb 2010 15:17:46 -0800 vyatta-cfg-system (0.16.39) unstable; urgency=low * add dependency on vyatta-biosdevname -- An-Cheng Huang Mon, 08 Feb 2010 12:53:02 -0800 vyatta-cfg-system (0.16.38) unstable; urgency=low * Bugfix 5225: Include the OS version number in the grub menu entry. -- Bob Gilligan Mon, 08 Feb 2010 12:04:44 -0800 vyatta-cfg-system (0.16.37) unstable; urgency=low * Bugfix 5120: Use biosdevname to generate the canonical name for an interface. -- Bob Gilligan Fri, 05 Feb 2010 16:49:36 -0800 vyatta-cfg-system (0.16.36) unstable; urgency=low * Force vyatta-cfg/vyatta-cfg-system version synchronization -- Stephen Hemminger Fri, 05 Feb 2010 12:31:10 -0800 vyatta-cfg-system (0.16.35) unstable; urgency=low * Set system host-name and time-zone first -- Stephen Hemminger Wed, 03 Feb 2010 14:39:44 -0800 vyatta-cfg-system (0.16.34) unstable; urgency=low * Change owner of created authorized key file * Move modprobe.d/no-copybreak from vyatta-cfg -- Stephen Hemminger Wed, 03 Feb 2010 13:37:20 -0800 vyatta-cfg-system (0.16.33) unstable; urgency=low * Fix password-authentication setup in sshd * Bug in handling local key file * Run login update as root -- Stephen Hemminger Tue, 02 Feb 2010 15:12:07 -0800 vyatta-cfg-system (0.16.32) unstable; urgency=low * Add help for system ip arp * Add help string for system ip neighbor * Static host-name mapping changes * Don't remove users home directory -- Stephen Hemminger Tue, 02 Feb 2010 10:52:39 -0800 vyatta-cfg-system (0.16.31) unstable; urgency=low * Allow local user (non vbash) accounts * Make message clearer -- Stephen Hemminger Wed, 27 Jan 2010 18:21:04 -0800 vyatta-cfg-system (0.16.30) unstable; urgency=low * Don't delete non-user accounts -- Stephen Hemminger Wed, 27 Jan 2010 09:39:33 -0800 vyatta-cfg-system (0.16.29) unstable; urgency=low * Don't allow vyatta configured accounts to overlap internal accounts * Reindent user account module * Change function names in User.pm * Refactor user update * Add additional check that new user doesn't exist in NSS * Get rid of protected-users file -- Stephen Hemminger Tue, 26 Jan 2010 18:30:04 -0800 vyatta-cfg-system (0.16.28) unstable; urgency=low * Bugfix 5229: Save old config info when installing on pre-existing RAID group. -- Bob Gilligan Tue, 26 Jan 2010 16:25:04 -0800 vyatta-cfg-system (0.16.27) unstable; urgency=low * Bugfix 5220: Use correct path to config directory on installed image. -- Bob Gilligan Tue, 26 Jan 2010 14:19:59 -0800 vyatta-cfg-system (0.16.26) unstable; urgency=low * Bugfix 5232: Correctly handle case where user doesn't want to save SSH keys -- Bob Gilligan Tue, 26 Jan 2010 12:03:23 -0800 vyatta-cfg-system (0.16.25) unstable; urgency=low [ Stephen Hemminger ] * Fix typo in PermitRoot setup. -- Stig Thormodsrud Mon, 25 Jan 2010 21:24:55 -0800 vyatta-cfg-system (0.16.24) unstable; urgency=low * Bugfix 5240: Prevent re-installation of same version on running systems -- Bob Gilligan Mon, 25 Jan 2010 17:23:21 -0800 vyatta-cfg-system (0.16.23) unstable; urgency=low * Remove duplicate crontab and stop munging /etc/crontab. -- Stig Thormodsrud Mon, 25 Jan 2010 15:13:09 -0800 vyatta-cfg-system (0.16.22) unstable; urgency=low * Fix allow-root for telnet/ssh -- Stephen Hemminger Sun, 24 Jan 2010 22:27:33 -0800 vyatta-cfg-system (0.16.21) unstable; urgency=low * Set IPV6 parameters in rl-system.init -- Stephen Hemminger Thu, 21 Jan 2010 11:24:44 -0800 vyatta-cfg-system (0.16.20) unstable; urgency=low [ Stephen Hemminger ] * Fix typo in install-image [ Bob Gilligan ] * Bugfix 5162: Make disabling flow control work at boot time. -- Bob Gilligan Tue, 19 Jan 2010 17:37:10 -0800 vyatta-cfg-system (0.16.19) unstable; urgency=low [ Jon Andersson ] * Restiction on filtering of udev rules -- Stig Thormodsrud Tue, 19 Jan 2010 17:01:50 -0800 vyatta-cfg-system (0.16.18) unstable; urgency=low [ Stephen Hemminger ] * Restrict radius-server timeout value [ Robert Bays ] * fix bug 5226: Hostname does not allow number as first char [ Stephen Hemminger ] * Change how IPV4/IPV6 configuration values are done -- Stephen Hemminger Tue, 19 Jan 2010 17:00:39 -0800 vyatta-cfg-system (0.16.17) unstable; urgency=low * Fix snmp trap-source -- Stephen Hemminger Mon, 18 Jan 2010 19:01:44 -0800 vyatta-cfg-system (0.16.16) unstable; urgency=low * Fix typo in community for trap-target -- Stephen Hemminger Mon, 18 Jan 2010 18:35:59 -0800 vyatta-cfg-system (0.16.15) unstable; urgency=low * Bugfix 5220: Save config information from previous image-based install. -- Bob Gilligan Mon, 18 Jan 2010 18:03:59 -0800 vyatta-cfg-system (0.16.14) unstable; urgency=low * Add sysctl to control IPV6 address flush -- Stephen Hemminger Thu, 14 Jan 2010 14:35:01 -0800 vyatta-cfg-system (0.16.13) unstable; urgency=low * Add support for trap community and port * Add support trap source address -- Stephen Hemminger Wed, 13 Jan 2010 19:54:16 -0800 vyatta-cfg-system (0.16.12) unstable; urgency=low * Don't allow installation to proceed if MD5 checksum errors are found. -- Bob Gilligan Wed, 13 Jan 2010 16:55:41 -0800 vyatta-cfg-system (0.16.11) unstable; urgency=low * Switch from wget to curl since the latter supports more URL methods. -- Bob Gilligan Fri, 08 Jan 2010 17:15:36 -0800 vyatta-cfg-system (0.16.10) unstable; urgency=low * Updates to SNMP link state trap -- Stephen Hemminger Wed, 06 Jan 2010 14:37:20 -0800 vyatta-cfg-system (0.16.9) unstable; urgency=low * Validate MD5 checksums on ISO file before proceeding with installation. -- Bob Gilligan Wed, 06 Jan 2010 14:32:18 -0800 vyatta-cfg-system (0.16.8) unstable; urgency=low * Do loopback before other interfaces * Remove snmpd.conf on deletion * Cleanup SNMP config file generation * SNMP: Merge common code for rand hex number * Change 'protocols snmp' to 'service snmp' * update version * Need to be root to remove snmpd.conf -- Stephen Hemminger Tue, 05 Jan 2010 18:39:32 -0800 vyatta-cfg-system (0.16.7) unstable; urgency=low * Add support for fetching ISO file based on URL. -- Bob Gilligan Wed, 23 Dec 2009 16:17:40 -0800 vyatta-cfg-system (0.16.6) unstable; urgency=low * Set default to only ARP if IP address matches received interface * Handle default of auto -- Stephen Hemminger Wed, 23 Dec 2009 10:49:38 -0800 vyatta-cfg-system (0.16.5) unstable; urgency=low * Update snmp template * Remove old init code * Read Vyatta version from file -- Stephen Hemminger Tue, 22 Dec 2009 20:59:10 -0800 vyatta-cfg-system (0.16.4) unstable; urgency=low * Bring device to up state when removed from bond -- Stephen Hemminger Tue, 22 Dec 2009 14:53:03 -0800 vyatta-cfg-system (0.16.3) unstable; urgency=low * Don't allow setting speed/duplex if hardware doesn't support it * Fix return of dhcp start client. * Mark banner script executable * Ignore more debian build files -- Stephen Hemminger Tue, 22 Dec 2009 14:02:55 -0800 vyatta-cfg-system (0.16.2) unstable; urgency=low * allow vyatta-cfg-system to replace interface files in older versions of -- Mohit Mehta Tue, 22 Dec 2009 11:45:39 -0800 vyatta-cfg-system (0.16.1) unstable; urgency=low * UNRELEASED -- Stephen Hemminger Mon, 21 Dec 2009 13:15:00 -0800 vyatta-cfg-system (0.16) unstable; urgency=low * Sync versions with vyatta-cfg -- Stephen Hemminger Mon, 21 Dec 2009 13:14:45 -0800 vyatta-cfg-system (0.15.127) unstable; urgency=low * Move interface support from vyatta-cfg to vyatta-cfg-system * Fix command-with-path-in-maintainer-script postinst:158 /usr/sbin/dpkg-reconfigure * Add vyatta-interfaces.pl to build -- Stephen Hemminger Mon, 21 Dec 2009 12:38:05 -0800 vyatta-cfg-system (0.15.126) unstable; urgency=low * User deletion update * Block passwd command for non-root user -- Stephen Hemminger Fri, 18 Dec 2009 14:56:43 -0800 vyatta-cfg-system (0.15.125) unstable; urgency=low * Re-enable frame-buffer on console * Fix install-image to save config/keys * Ignore errors from chmod/chown if ssh keys don't exist -- Stephen Hemminger Mon, 14 Dec 2009 16:57:26 -0800 vyatta-cfg-system (0.15.124) unstable; urgency=low * The protected-users file does not need to be made during install * Redefine meaning of protected-user -- Stephen Hemminger Wed, 09 Dec 2009 14:53:06 -0800 vyatta-cfg-system (0.15.123) unstable; urgency=low * Keep udev from borking wireless device names * Allow root account to not exist * Force root account to have disabled password -- Stephen Hemminger Tue, 08 Dec 2009 15:03:25 -0800 vyatta-cfg-system (0.15.122) unstable; urgency=low * don't block passwd with pam * Fix configure of user -- Stephen Hemminger Mon, 07 Dec 2009 11:41:33 -0800 vyatta-cfg-system (0.15.121) unstable; urgency=low * Fix load user key script * Add back public-key templates * Fix code that generates authorized keys -- Stephen Hemminger Fri, 04 Dec 2009 20:25:12 -0800 vyatta-cfg-system (0.15.120) unstable; urgency=low * Oops forgot to update installed version * Rearrange the public-key configuration schema * Block user from changing name or password -- Stephen Hemminger Fri, 04 Dec 2009 15:47:22 -0800 vyatta-cfg-system (0.15.119) unstable; urgency=low * Change telnet allow-root to existance (instead of boolean) -- Stephen Hemminger Fri, 04 Dec 2009 09:54:03 -0800 vyatta-cfg-system (0.15.118) unstable; urgency=low * Fix some file headers that cause build warnings * Add dependency on adduser -- Stephen Hemminger Thu, 03 Dec 2009 16:29:30 -0800 vyatta-cfg-system (0.15.117) unstable; urgency=low * SSH enhancements * Require key-type to be set. * Update .ssh/authorized_keys as part of the login update * Set modes of created authorization key (and directory) * Add script for loading public key * Add script for loading public key * Preserve ssh host keys in install-image -- Stephen Hemminger Thu, 03 Dec 2009 16:20:51 -0800 vyatta-cfg-system (0.15.116) unstable; urgency=low * Use ext3 all the time -- Stephen Hemminger Wed, 02 Dec 2009 18:18:31 -0800 vyatta-cfg-system (0.15.115) unstable; urgency=low [ Stephen Hemminger ] * Pass more info to login scripts * Don't lose user customization to pam-auth * Simply Radius server update [ Bob Gilligan ] * Changes related to co-ordination between kernel parameters and radvd. -- Bob Gilligan Wed, 02 Dec 2009 16:48:52 -0800 vyatta-cfg-system (0.15.114) unstable; urgency=low [ Stephen Hemminger ] * Add ability to disable password authentication [ Bob Gilligan ] * Co-ordinate global and per-interface IPv6 forwarding control. -- Bob Gilligan Wed, 02 Dec 2009 11:50:31 -0800 vyatta-cfg-system (0.15.113) unstable; urgency=low * Avoid updating files on boot * Get rid of warning on package update * Save SSH keys on re-install -- Stephen Hemminger Tue, 01 Dec 2009 14:14:00 -0800 vyatta-cfg-system (0.15.112) unstable; urgency=low * Add sync after config save -- Stephen Hemminger Tue, 01 Dec 2009 09:53:35 -0800 vyatta-cfg-system (0.15.111) unstable; urgency=low * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 16:40:47 -0800 vyatta-cfg-system (0.15.110) unstable; urgency=low [ Stephen Hemminger ] * Remove Radius server on reboot [ Michael Larson ] * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 16:33:59 -0800 vyatta-cfg-system (0.15.109) unstable; urgency=low * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 15:55:21 -0800 vyatta-cfg-system (0.15.108) unstable; urgency=low * added required keyword to help text. -- Michael Larson Mon, 30 Nov 2009 15:36:33 -0800 vyatta-cfg-system (0.15.107) unstable; urgency=low * Add user tss for udev -- Stephen Hemminger Thu, 19 Nov 2009 16:41:35 -0800 vyatta-cfg-system (0.15.106) unstable; urgency=low * Mount floppy with dirsync -- Stephen Hemminger Wed, 18 Nov 2009 21:25:57 -0800 vyatta-cfg-system (0.15.105) unstable; urgency=low * Don't start hostapd at boot -- Stephen Hemminger Tue, 17 Nov 2009 16:26:26 -0800 vyatta-cfg-system (0.15.104) unstable; urgency=low * Add start_offset value to log message when partion attempt fails. -- Bob Gilligan Fri, 13 Nov 2009 17:46:42 -0800 vyatta-cfg-system (0.15.103) unstable; urgency=low * Add start_offset value to log message when partion attempt fails. -- Bob Gilligan Fri, 13 Nov 2009 16:39:04 -0800 vyatta-cfg-system (0.15.102) unstable; urgency=low * dependency update -- Michael Larson Fri, 13 Nov 2009 13:45:26 -0800 vyatta-cfg-system (0.15.101) unstable; urgency=low * Remove blank line * Show dependency on pam version -- Stephen Hemminger Wed, 11 Nov 2009 17:09:29 -0800 vyatta-cfg-system (0.15.100) unstable; urgency=low * copy the whole config directory during install -- An-Cheng Huang Tue, 10 Nov 2009 14:08:59 -0800 vyatta-cfg-system (0.15.99) unstable; urgency=low [ An-Cheng Huang ] * use new vyatta-union arg to reduce kernel cmdline length. [ Robert Bays ] * Fix library include -- Robert Bays Fri, 06 Nov 2009 05:53:10 -0800 vyatta-cfg-system (0.15.98) unstable; urgency=low [ Stephen Hemminger ] * Remove blank line * Fix pam-auth-update errors from radius * Move user configuration information to files * radius: only try first password if first module [ An-Cheng Huang ] * move custom script to custom repo -- An-Cheng Huang Thu, 05 Nov 2009 15:01:40 -0800 vyatta-cfg-system (0.15.97) unstable; urgency=low * Fix 5063: committing "set interfaces ethernet <> bridge-group bridge <>" got "invalid variable reference (invalid format)" -- Stig Thormodsrud Mon, 02 Nov 2009 18:31:22 -0800 vyatta-cfg-system (0.15.96) unstable; urgency=low [ An-Cheng Huang ] * use top-level pid for progress indicator [ Stephen Hemminger ] * Don't want/need --package option to pam-auth-update * Reset PAM configuration on boot * rename pam-radius to pam_radius.cfg -- Stephen Hemminger Mon, 02 Nov 2009 17:28:17 -0800 vyatta-cfg-system (0.15.95) unstable; urgency=low [ David S. Madole ] * Add VRRP capability to bonding interfaces and vifs of bonding interfaces. [ Stig Thormodsrud ] * Convert keepalived to use Interface infrastructure. * Add priority for bonding vrrp nodes. * Fix interface carrier status. * Fix 'show vrrp summary' showing last vip 1st * Using Interface.pm infrastructure to detect vif on eth|bond interface. -- Stig Thormodsrud Sun, 01 Nov 2009 14:59:29 -0800 vyatta-cfg-system (0.15.94) unstable; urgency=low [ An-Cheng Huang ] * add unified install-image [ slioch ] * added missed vrrp priorities. -- slioch Sat, 31 Oct 2009 14:02:41 -0700 vyatta-cfg-system (0.15.93) unstable; urgency=low * radius client: try first password only if not first * Shut up debconf when installing pam radius * radius-server: shutup debconf dialog * radius: add missing space -- Stephen Hemminger Fri, 30 Oct 2009 13:37:15 -0700 vyatta-cfg-system (0.15.92) unstable; urgency=low * Dont start radvd on boot -- Stephen Hemminger Thu, 29 Oct 2009 11:16:33 -0700 vyatta-cfg-system (0.15.91) unstable; urgency=low * Fix description of vif bonding * Use pam-auth-update to configure radius -- Stephen Hemminger Tue, 27 Oct 2009 18:52:45 -0700 vyatta-cfg-system (0.15.90) unstable; urgency=low * move priority after tag nodes. -- slioch Wed, 21 Oct 2009 09:12:23 -0700 vyatta-cfg-system (0.15.89) unstable; urgency=low * move priority after multi tags -- slioch Tue, 20 Oct 2009 21:22:35 -0700 vyatta-cfg-system (0.15.88) unstable; urgency=low * partial fix for bug 4903. -- slioch Tue, 20 Oct 2009 16:11:07 -0700 vyatta-cfg-system (0.15.87) unstable; urgency=low * add .merge-branch-exclude * update .merge-branch-exclude -- An-Cheng Huang Wed, 14 Oct 2009 13:16:18 -0700 vyatta-cfg-system (0.15.86) unstable; urgency=low [ Robert Bays ] * limit xen dom0 memory to 512meg -- Stephen Hemminger Tue, 13 Oct 2009 16:42:00 -0700 vyatta-cfg-system (0.15.85) unstable; urgency=low * add override mechanism for protected users -- An-Cheng Huang Mon, 05 Oct 2009 19:20:44 -0700 vyatta-cfg-system (0.15.84) unstable; urgency=low * use pattern instead of exec -- Mohit Mehta Fri, 02 Oct 2009 18:31:15 -0700 vyatta-cfg-system (0.15.83) unstable; urgency=low * Mount floppy with safer options -- Stephen Hemminger Thu, 01 Oct 2009 12:05:29 -0700 vyatta-cfg-system (0.15.82) unstable; urgency=low [ Stephen Hemminger ] * Cleanup all vbash users [ Bob Gilligan ] * Bugfix 4951: Add configuration parameter to blacklist the IPv6 module. -- Bob Gilligan Thu, 24 Sep 2009 16:05:25 -0700 vyatta-cfg-system (0.15.81) unstable; urgency=low * Bugfix 4892: Add a config parameter to disable IPv6 -- Bob Gilligan Wed, 23 Sep 2009 16:27:00 -0700 vyatta-cfg-system (0.15.80) unstable; urgency=low * Bugfix 4951: Don't fail if IPv6 kernel module is not loaded. -- Bob Gilligan Tue, 22 Sep 2009 15:56:58 -0700 vyatta-cfg-system (0.15.79) unstable; urgency=low * allow install on old compaq smart-array -- Robert Bays Mon, 14 Sep 2009 09:10:18 -0700 vyatta-cfg-system (0.15.78) unstable; urgency=low * Fix Bug 4919 "service dns" branch of configuration file missing ... -- Mohit Mehta Fri, 11 Sep 2009 18:11:30 -0700 vyatta-cfg-system (0.15.77) unstable; urgency=low * User group fixes * Add operators to vyattaop group * If configuration is wrong just skip user don't die * Delete vyatta users not in configuration -- Stephen Hemminger Fri, 11 Sep 2009 16:31:43 -0700 vyatta-cfg-system (0.15.76) unstable; urgency=low * Invert test for livecd -- Stephen Hemminger Fri, 11 Sep 2009 08:31:19 -0700 vyatta-cfg-system (0.15.75) unstable; urgency=low * Move check for livecd install to before filesystem intialization -- Stephen Hemminger Thu, 10 Sep 2009 15:44:25 -0700 vyatta-cfg-system (0.15.74) unstable; urgency=low * Allow null description on device -- Stephen Hemminger Wed, 09 Sep 2009 14:39:39 -0700 vyatta-cfg-system (0.15.73) unstable; urgency=low [ Bob Gilligan ] * Bugfix 4916, 4917: Exit correctly when vyatta user doesn't exist. Add timeout. [ Stephen Hemminger ] * Enforce syntax checking on password [ Bob Gilligan ] -- Bob Gilligan Fri, 04 Sep 2009 02:56:14 -0700 vyatta-cfg-system (0.15.72) unstable; urgency=low * Revert "Validate encrypted password field" -- Stephen Hemminger Fri, 04 Sep 2009 09:35:58 -0700 vyatta-cfg-system (0.15.71) unstable; urgency=low * Don't change name of non-ethernet devices * Validate encrypted password field -- Stephen Hemminger Thu, 03 Sep 2009 11:18:24 -0700 vyatta-cfg-system (0.15.70) unstable; urgency=low * Bonding: load module with MII monitor enabled * bonding: remove primary slave last * BONDING: handle change of bond-group * BONDING: handle change of bond-group * BONDING: fix error messages * Fix bonding group setup * Remove slaves before changing mode -- Stephen Hemminger Tue, 04 Aug 2009 16:27:17 -0700 vyatta-cfg-system (0.15.69) unstable; urgency=low * Fix uninitialized variable. * Fix 4766: can't set login banners "Can't locate Vyatta/Login/Banner.pm" -- Stig Thormodsrud Thu, 30 Jul 2009 16:27:16 -0700 vyatta-cfg-system (0.15.68) unstable; urgency=low * Bugfix 4700: Move processing to "end" field so that param modifications are handled. -- Bob Gilligan Thu, 30 Jul 2009 14:09:49 -0700 vyatta-cfg-system (0.15.67) unstable; urgency=low [ Stig Thormodsrud ] * Fix 4748: Pre-login message files (/etc/issue,/etc/issue.net) are -- Bob Gilligan Thu, 30 Jul 2009 13:59:35 -0700 vyatta-cfg-system (0.15.66) unstable; urgency=low * fix undefined array ref -- An-Cheng Huang Mon, 27 Jul 2009 18:06:59 -0700 vyatta-cfg-system (0.15.65) unstable; urgency=low [ Stephen Hemminger ] * Fix User Login configurator * Make Radius server work * Change API for login modules * Handle deletion of radius (or other) server * Avoid rewriting radius config unless needed * Fix multi-nodes for address using update tag * Fix some more update tag * Fix generation of syslog host targets * Change version of system config [ An-Cheng Huang ] * Use sysfs for bonding device control [ Stephen Hemminger ] * Fix help/completion for xor-hash * Remove invalid buried templates [ An-Cheng Huang ] * Revert earlier change -- keep debian net.agent [ Stephen Hemminger ] * Remove ability to add vif to macvlan * Convert bonding to use sysfs instead of ifenslave * Add ifupdown package * move acpid and ifupdown from Suggest to Depends * Make telnet management smarter [ Bob Gilligan ] * Bugfix 4592: Generate NTP config file from Vyatta configuration parameters. [ Mark O'Brien ] * Change interface state to down, add to bond group, change state to up. * Added link detect to ethernet bonded vlan interfaces. * Fix 'sh: line 1:' error ing bug 4655. * Allow user to select round-robin mode. [ Stephen Hemminger ] * Block creating vif until after slaves present * Allow disable of bonding interface with VIF * Revert "Allow user to select round-robin mode." * Allow round-robin to be selected * Fix descriptions with meta-characters [ An-Cheng Huang ] * initial implementation of image install -- An-Cheng Huang Fri, 17 Jul 2009 15:09:47 -0700 vyatta-cfg-system (0.15.64) unstable; urgency=low * Bugfix 4708: Re-structure to avoid using "update" in non-leaf valueless nodes. -- Bob Gilligan Tue, 14 Jul 2009 17:19:12 -0700 vyatta-cfg-system (0.15.63) unstable; urgency=low * Bugfix 4708: Eliminate use of "update" in non-leaf valueless nodes. -- Bob Gilligan Tue, 14 Jul 2009 12:12:55 -0700 vyatta-cfg-system (0.15.62) unstable; urgency=low [ Mark O'Brien ] * Fix 'sh:1 error' in bug 4655. [ Mohit Mehta ] * Fix Bug 4554 check for existing firewall ruleset fails when applying it to a zone during boot -- Mohit Mehta Thu, 02 Jul 2009 12:23:33 -0700 vyatta-cfg-system (0.15.61) unstable; urgency=low * Fix Bug 4593 zone-policy can't be deleted if zone interfaces are bridges -- Mohit Mehta Tue, 30 Jun 2009 18:28:55 -0700 vyatta-cfg-system (0.15.60) unstable; urgency=low * make changes to work with dhcp 4.1.0 -- Mohit Mehta Mon, 29 Jun 2009 10:05:35 -0700 vyatta-cfg-system (0.15.59) unstable; urgency=low * Update hooks to setup config files for installing to a Xen VM. -- Bob Gilligan Thu, 25 Jun 2009 17:41:38 -0700 vyatta-cfg-system (0.15.58) unstable; urgency=low * Add optional hooks to setup config files for installing to a Xen VM. -- Bob Gilligan Wed, 24 Jun 2009 16:19:12 -0700 vyatta-cfg-system (0.15.57) unstable; urgency=low * temporarily undo check for firewall ruleset until bug 4554 is resolved -- Mohit Mehta Wed, 17 Jun 2009 20:35:37 -0700 vyatta-cfg-system (0.15.56) unstable; urgency=low * Merged from Jenner. -- Bob Gilligan Wed, 17 Jun 2009 16:24:28 -0700 vyatta-cfg-system (0.15.55) unstable; urgency=low * Bugfix 4490: Wait for stability after marking partition bootable. -- Bob Gilligan Wed, 17 Jun 2009 16:22:47 -0700 vyatta-cfg-system (0.15.54) unstable; urgency=low * Bugfix 4490: Mark root partition as "bootable" in the master boot record (MBR). -- Bob Gilligan Wed, 17 Jun 2009 10:49:56 -0700 vyatta-cfg-system (0.15.53) unstable; urgency=low * Fix 4579: There is no validation for vrrp virtual-address like the one for interfaces address. -- Stig Thormodsrud Sun, 14 Jun 2009 14:30:17 -0700 vyatta-cfg-system (0.15.52) unstable; urgency=low * change default-policy to default-action for zones -- Mohit Mehta Wed, 03 Jun 2009 16:42:45 -0700 vyatta-cfg-system (0.15.51) unstable; urgency=low [ Stephen Hemminger ] * Tacplus no longer part of jenner -- An-Cheng Huang Tue, 02 Jun 2009 11:25:45 -0700 vyatta-cfg-system (0.15.50) unstable; urgency=low [ Stephen Hemminger ] * Print error message on failure to create group/user [ Mohit Mehta ] * move server,protocol to the same line in config file [ Stig Thormodsrud ] * Change tunnel multicast from on/off to enable/disable. * Fix bug preventing 'vyatta' user login. [ Stephen Hemminger ] * Fix deletion of pseudo-ethernet * Ignore patch and editor temporary files * Change how system login update works -- An-Cheng Huang Mon, 01 Jun 2009 17:43:59 -0700 vyatta-cfg-system (0.15.48) unstable; urgency=low * Restore default facility for 'syslog console' * Revert "Restore default facility for 'syslog console'" * NTP management version 3 -- Stephen Hemminger Wed, 27 May 2009 10:12:45 -0700 vyatta-cfg-system (0.15.47) unstable; urgency=low [ Jon Andersson ] * Fix 4430: Not possible to create tunnel on fluctating interfaces * Allow multicast to be enabled on tunnel interfaces. [ Stig Thormodsrud ] -- Stig Thormodsrud Mon, 25 May 2009 14:19:19 -0700 vyatta-cfg-system (0.15.46) unstable; urgency=low * Fix install rules * Simplify ntp.conf * Fix post install script to adjust ntp.conf and net.agent -- Stephen Hemminger Sun, 24 May 2009 10:15:03 -0700 vyatta-cfg-system (0.15.45) unstable; urgency=low * Put server at end of file * add iburst * Fix ntp.conf management -- Stephen Hemminger Fri, 22 May 2009 14:38:52 -0700 vyatta-cfg-system (0.15.44) unstable; urgency=low * UNRELEASED -- Stephen Hemminger Fri, 22 May 2009 14:36:24 -0700 vyatta-cfg-system (0.15.43) unstable; urgency=low * Run ntp during boot * Don't run net.agent -- Stephen Hemminger Fri, 22 May 2009 10:22:30 -0700 vyatta-cfg-system (0.15.42) unstable; urgency=low * Change default NTP server * Don't flush out ntp.conf on boot * Revert "Change default NTP server" * Add NTP configuration file -- Stephen Hemminger Fri, 22 May 2009 08:13:33 -0700 vyatta-cfg-system (0.15.41) unstable; urgency=low [ Stephen Hemminger ] * Avoid restarting NTP server if not needed [ Mohit Mehta ] * Fix Bug 4416 Add the ability to configure a specific server for DynDNS -- Mohit Mehta Tue, 19 May 2009 21:24:59 -0700 vyatta-cfg-system (0.15.40) unstable; urgency=low * Don't advertise loopback interface as an allowed value for zone interfaces -- Mohit Mehta Fri, 15 May 2009 12:20:42 -0700 vyatta-cfg-system (0.15.39) unstable; urgency=low * Fix Bug 4395 After local-zone is set, traffic from localhost is dropped -- Mohit Mehta Fri, 15 May 2009 11:02:14 -0700 vyatta-cfg-system (0.15.38) unstable; urgency=low * Allow specifying 'protocols' for syslog facility * Reindent syslog script -- Stephen Hemminger Wed, 06 May 2009 17:21:16 -0700 vyatta-cfg-system (0.15.37) unstable; urgency=low * * do silent validity check when creating zone chains and adding from zone rules -- Mohit Mehta Wed, 06 May 2009 16:52:59 -0700 vyatta-cfg-system (0.15.36) unstable; urgency=low * Split up system login scripts -- Stephen Hemminger Tue, 05 May 2009 13:51:14 -0700 vyatta-cfg-system (0.15.35) unstable; urgency=low * * restrict zone name to 20 characters -- Mohit Mehta Tue, 05 May 2009 11:50:15 -0700 vyatta-cfg-system (0.15.34) unstable; urgency=low * Move virtual-ethernet to pseudo-ethernet -- Stephen Hemminger Wed, 29 Apr 2009 12:32:41 -0700 vyatta-cfg-system (0.15.33) unstable; urgency=low [ Stig Thormodsrud ] * Replace md5 compare with a (hopefully) lighter-weight file compare. [ Stephen Hemminger ] * ntp: fix message -- Stephen Hemminger Tue, 28 Apr 2009 14:09:30 -0700 vyatta-cfg-system (0.15.32) unstable; urgency=low * Using perl module for move() rather than system call. * Avoid unnecessary writing of file if it's the same contents. -- Stig Thormodsrud Mon, 27 Apr 2009 14:42:17 -0700 vyatta-cfg-system (0.15.31) unstable; urgency=low * Add configurable login banners. -- Stig Thormodsrud Sun, 26 Apr 2009 18:53:02 -0700 vyatta-cfg-system (0.15.30) unstable; urgency=low * * add jump to local-zone-out chain in OUTPUT chain for both [ip and ip6] tables -- Mohit Mehta Fri, 24 Apr 2009 18:31:57 -0700 vyatta-cfg-system (0.15.29) unstable; urgency=low * Add support for virtual-ethernet * New tacacs+ configuration templates -- Stephen Hemminger Fri, 24 Apr 2009 13:01:24 -0700 vyatta-cfg-system (0.15.28) unstable; urgency=low [ Justin Fletcher ] * Allow for enterprise MIB [ Mohit Mehta ] * Fix Bug 4207 dns forwarding has hardcoded ethernet assumptions [ Stig Thormodsrud ] -- Stig Thormodsrud Thu, 23 Apr 2009 13:26:49 -0700 vyatta-cfg-system (0.15.27) unstable; urgency=low * Move disable-link-detect out of vyatta-cfg-quagga to interfaces -- Stephen Hemminger Mon, 20 Apr 2009 09:22:39 -0700 vyatta-cfg-system (0.15.26) unstable; urgency=low * add default-policy node for zones. can be set to drop or reject * add default-policy node for zones. can be set to drop or reject -- Mohit Mehta Thu, 16 Apr 2009 17:46:19 -0700 vyatta-cfg-system (0.15.25) unstable; urgency=low * add read-write union install mechanism * handle default xen kernel * post-install changes -- An-Cheng Huang Tue, 14 Apr 2009 16:27:15 -0700 vyatta-cfg-system (0.15.24) unstable; urgency=low * add local-zone in|out firewall and clean-up code -- Mohit Mehta Fri, 10 Apr 2009 18:41:11 -0700 vyatta-cfg-system (0.15.23) unstable; urgency=low * Fix file syslog target -- Stephen Hemminger Fri, 10 Apr 2009 10:13:35 -0700 vyatta-cfg-system (0.15.22) unstable; urgency=low * fix xen kernel handling for union install -- An-Cheng Huang Thu, 09 Apr 2009 13:49:59 -0700 vyatta-cfg-system (0.15.21) unstable; urgency=low * Resolve problems with syslog.conf -- Stephen Hemminger Thu, 09 Apr 2009 13:25:42 -0700 vyatta-cfg-system (0.15.20) unstable; urgency=low * Rewrite syslog management -- Stephen Hemminger Wed, 08 Apr 2009 15:35:47 -0700 vyatta-cfg-system (0.15.19) unstable; urgency=low * change xen kernel detection -- An-Cheng Huang Mon, 06 Apr 2009 11:41:23 -0700 vyatta-cfg-system (0.15.18) unstable; urgency=low * Fix "clear vrrp process". Use new perl lib hierarchy. -- Stig Thormodsrud Sun, 05 Apr 2009 13:14:14 -0700 vyatta-cfg-system (0.15.17) unstable; urgency=low [ Stig Thormodsrud ] * Change "syntax" check to "commit" check for virtual interfaces. * 0.15.16 [ Stephen Hemminger ] * Update template to handle change in default syslog.conf -- Stephen Hemminger Wed, 01 Apr 2009 16:52:02 -0700 vyatta-cfg-system (0.15.16) unstable; urgency=low * Change "syntax" check to "commit" check for virtual interfaces. -- Stig Thormodsrud Wed, 01 Apr 2009 16:27:35 -0700 vyatta-cfg-system (0.15.15) unstable; urgency=low * Don't double log quagga messages * Help text spelling fix * Update help text to show which facility is quagga * Use interface check program -- Stephen Hemminger Wed, 01 Apr 2009 08:46:51 -0700 vyatta-cfg-system (0.15.14) unstable; urgency=low * Turn off forwarding delay if STP is off * Set forwarding-delay when STP is enabled -- Stephen Hemminger Tue, 31 Mar 2009 14:12:24 -0700 vyatta-cfg-system (0.15.13) unstable; urgency=low * UNRELEASED -- Bob Gilligan Thu, 26 Mar 2009 14:53:20 -0700 vyatta-cfg-system (0.15.12) unstable; urgency=low * Bugfix 4139: Increase minimum root filesystem size to 1 GB. -- Bob Gilligan Thu, 26 Mar 2009 14:11:38 -0700 vyatta-cfg-system (0.15.11) unstable; urgency=low * Revert "Split login authentication configuration into three scripts" -- Stephen Hemminger Thu, 26 Mar 2009 10:17:39 -0700 vyatta-cfg-system (0.15.10) unstable; urgency=low * Add "interface ethernet <> bridge-group bridge" update tag in addition to create tag. -- Stig Thormodsrud Wed, 25 Mar 2009 18:22:28 -0700 vyatta-cfg-system (0.15.9) unstable; urgency=low * Change bridge check from "syntax" to "create". -- Stig Thormodsrud Wed, 25 Mar 2009 17:45:33 -0700 vyatta-cfg-system (0.15.8) unstable; urgency=low * move keepalived.pm to vyatta-cfg -- Stephen Hemminger Wed, 25 Mar 2009 16:43:25 -0700 vyatta-cfg-system (0.15.7) unstable; urgency=low [ Stephen Hemminger ] * Fix bare file handle warning * Split login authentication configuration into three scripts [ Stig Thormodsrud ] * Change "syntax" check to "commit" check for "bridge-group bridge". [ Stephen Hemminger ] * Fix update of description -- Stephen Hemminger Wed, 25 Mar 2009 14:19:22 -0700 vyatta-cfg-system (0.15.6) unstable; urgency=low * Change "syntax" check to a "commit" check. -- Stig Thormodsrud Tue, 24 Mar 2009 17:53:17 -0700 vyatta-cfg-system (0.15.5) unstable; urgency=low * Save interface description in kernel -- Stephen Hemminger Mon, 23 Mar 2009 12:27:42 -0700 vyatta-cfg-system (0.15.4) unstable; urgency=low [ Stephen Hemminger ] * Change update to create on multi-nodes [ Mohit Mehta ] * will help debug bug 4181 if and when it happens [ An-Cheng Huang ] * use renamed tacplus package -- An-Cheng Huang Mon, 23 Mar 2009 11:11:38 -0700 vyatta-cfg-system (0.15.3-14) unstable; urgency=low * Fix 4190: vrrp may fail to start daemon if previous commit of vrrp partially failed -- Stig Thormodsrud Thu, 12 Mar 2009 10:58:43 -0700 vyatta-cfg-system (0.15.3-13) unstable; urgency=low [ Mohit Mehta ] * use code from Vyatta::Misc where is_dhcp_enabled() is already defined [ Stephen Hemminger ] * Fix perlcritic warning about bare file handle * Fix delete of bonding vif * Don't allow vif on disabled bonding interface -- Stephen Hemminger Wed, 11 Mar 2009 21:36:16 -0700 vyatta-cfg-system (0.15.3-12) unstable; urgency=low [ Stig Thormodsrud ] * Fix 4183: No auto completion for group number when running 'clear vrrp [ Bob Gilligan ] * Remove per-interface firewall templates. They are generated now. -- Bob Gilligan Mon, 09 Mar 2009 11:16:47 -0700 vyatta-cfg-system (0.15.3-11) unstable; urgency=low [ Stig Thormodsrud ] * Remove prefix mask on vip if present since it can't be using in arping. [ Stephen Hemminger ] * Fix path to lsof -- An-Cheng Huang Sat, 07 Mar 2009 23:25:55 -0800 vyatta-cfg-system (0.15.3-10) unstable; urgency=low [ Stephen Hemminger ] * Fix perlcritic warnings * Change sudo ability of some operator related commands * More checking for open() of log [ Stig Thormodsrud ] * Move changes file to /var/run/vrrpd and make sure the directory exists. * Remove unused directory. * Specify source address with arping since we no longer require an IP -- Stig Thormodsrud Fri, 06 Mar 2009 18:59:46 -0800 vyatta-cfg-system (0.15.3-9) unstable; urgency=low * Fix path on hwclock cleanout * Run through tidy for indent * Use vyatta-interfaces.pl to show available bonding devices * Use vyatta-interfaces.pl to check bridge validity * Fix slave device startup -- Stephen Hemminger Tue, 03 Mar 2009 10:56:22 -0800 vyatta-cfg-system (0.15.3-8) unstable; urgency=low * Convert to bonding vif to use netlink. * Change install-system to handle CF better * Remove out of date quick-install -- Stephen Hemminger Mon, 02 Mar 2009 16:11:10 -0800 vyatta-cfg-system (0.15.3-7) unstable; urgency=low [ Mohit Mehta ] * let admin user set arp paramters [ Stig Thormodsrud ] * Fix 3778: vrrp should allow prefix to be included with the virtual- address * Fix breakage from previous cleanup commit. * Fix 4068: 'show vrrp' last transition times are not updated when a transition occurs on boot. * Fix 4152: Add support for VRRP operation on unnumbered interfaces -- Stig Thormodsrud Sun, 01 Mar 2009 12:15:45 -0800 vyatta-cfg-system (0.15.3-6) unstable; urgency=low [ An-Cheng Huang ] * fix logic and shell syntax * up the bridge interface when it's created [ Mohit Mehta ] * Fix Bug 2463 Allow the neighbor table threshold values to be -- Mohit Mehta Fri, 27 Feb 2009 19:08:52 -0800 vyatta-cfg-system (0.15.3-5) unstable; urgency=low * set default values for ipv6 accept_redirects and accept_source_route -- Mohit Mehta Tue, 24 Feb 2009 18:56:48 -0800 vyatta-cfg-system (0.15.3-4) unstable; urgency=low * Allow installation on virtio disk * Don't depend on /proc/ide -- Stephen Hemminger Tue, 24 Feb 2009 15:41:57 -0800 vyatta-cfg-system (0.15.3-3) unstable; urgency=low [ Stephen Hemminger ] * Take out ipt_rlsnmpstats module [ Mohit Mehta ] * Fix Bug 3951 default values for kernel tunable security parameters under firewall -- Mohit Mehta Thu, 19 Feb 2009 19:12:45 -0800 vyatta-cfg-system (0.15.3-2) unstable; urgency=low * fix spelling mistake -- Mohit Mehta Tue, 10 Feb 2009 10:10:03 -0800 vyatta-cfg-system (0.15.3-1) unstable; urgency=low [ Stephen Hemminger ] * bridge: handle non ethernet devices in bridge [ Mohit Mehta ] * permit operator-level user to issue show and clear commands for firewall -- Mohit Mehta Fri, 06 Feb 2009 17:45:06 -0800 vyatta-cfg-system (0.15.3) unstable; urgency=low * Fix delete of bonding interface * Replace bare word file handle -- Stephen Hemminger Mon, 26 Jan 2009 16:25:33 -0800 vyatta-cfg-system (0.15.2) unstable; urgency=low * disable bridge node should be same as disable ethernet * Bridge/bonding update to new syntax -- Stephen Hemminger Mon, 12 Jan 2009 16:51:36 -0800 vyatta-cfg-system (0.15.1) unstable; urgency=low [ Rick Balocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3731 [ Stephen Hemminger ] * Fix password changer to deal with update config format * Make standalone passwd reset change vyatta not root * Leave root account disabled * Standalone tool now changes vyatta not root password [ Rick Balocca ] * Fix typo [ rbalocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2426 [ Stephen Hemminger ] * Mount root filesystem with noatime * Add completion for allowed values * Don't force rebuild of ssh_host_key on each boot * Remove OFR from grub lines * fix grammar of previous patch * Don't restart sshd if not needed * Always restart ssh [ Robert Bays ] * add basic tacacs+ support [ Stephen Hemminger ] * Avoid sleep in ntp restart * Speed up boot * Remove extra call to set hwclock on startup * typo in last commit * Speed up addition of users to system [ Mohit Mehta ] * dhcp action scripts for linkup/down [ Stephen Hemminger ] * Fix sysctl key values [ An-Cheng Huang ] * add support for development build [ Mohit Mehta ] * Fix Bug 3917 dhcp brings interface up for lease acquire/renew even though interface has been disabled in CLI [ Stephen Hemminger ] * Rename VyattaKeepalived to Vyatta::Keepalived * Convert to Vyatta::Config hierarchy [ Bob Gilligan ] * Bugfix 3747: Allow user to break previously existing RAID group. [ Stephen Hemminger ] * VyattaConfig -> Vyatta::Config * Add correct help for bonding modes [ Rick Balocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3963 [ Stephen Hemminger ] * use vyatta-link-detect * Remove OFR from grub lines * fix grammar of previous patch * need full path to linkdetect [ An-Cheng Huang ] * update maintainer information * "files" file should be removed before package build [ Stephen Hemminger ] * Add acpid [ slioch ] * removed unprintable form-feed characters. This was causing xml validation to fail within the webgui. [ Mohit Mehta ] * Fix Bug 4022 dynamic dns config fails during system boot if interface does not exist [ An-Cheng Huang ] -- An-Cheng Huang Thu, 08 Jan 2009 09:25:28 -0800 vyatta-cfg-system (0.15) unstable; urgency=low 3.2.0 [ Mark O'Brien ] [ Bob Gilligan ] * Bugfix 3738: Improve safety in installing onto RAID sets. * Bugfix 3932 [ Stig Thormodsrud ] * Fix 3929: Operator level user now need sudo password to run "clear arp [ Bob Gilligan ] * Bugfix 3928: Need to install vyatta-raid-event script. [ Stig Thormodsrud ] * Fix 3920: Operator level users require sudo permission for nat * Fix 3918: Operator level users require sudo permission for ipv6 clear [ Stephen Hemminger ] * Make sure install-system only run with root privledges [ Mohit Mehta ] * make 'show interfaces wirelessmodem stats' work from operator mode [ Stephen Hemminger ] * Handle older format config files in password reset [ An-Cheng Huang ] * fix for bug 2313: add support for "Region/City" timezone specification. [ Mohit Mehta ] * rmeove ddclient script from ppp ip-up directory as we configure [ Stig Thormodsrud ] * Add config to disable ip/ipv6 forwarding. [ Mohit Mehta ] * change input parameter name from dhclient_script to outside_cli to [ Robert Bays ] * bug 3791: set sysObjectID and sysDescr * bug 1587: add error message when user tries native install from non- union media [ Bob Gilligan ] * Bugfix: 3841 [ Stephen Hemminger ] * Fix standalone password reset * Allow more ethtool commands * Make stanalone passwd reset work [ Mohit Mehta ] * Fix Bug 3840 System error reported on initial SNMP commit with trap target [ Stephen Hemminger ] * Handle config file format change in standalone reset * Fix password changer to deal with update config format [ An-Cheng Huang ] * add firewall configuration to bridge interface [ Stephen Hemminger ] * Fix bad tab completion on interfaces/bonding [ Mohit Mehta ] * Fix Bug 3567 Debug messages are not logged by default on upgraded system [ Bob Gilligan ] * Bugfix: 3687: Only start mdadm if we have a RAID group as root filesystem. * Bugfix: 3775: Allow RAID-1 to be configured on disks with different sizes [ Stig Thormodsrud ] * Change telnet allow-root type from txt to bool. [ Stephen Hemminger ] * Need sudo when editing ssh config file * Fix parsing of allow-root field * Revert "Block remote access to rpc-bind port" * Block remote access to rpc-bind port [ Bob Gilligan ] * Bugfix: 3744 [ An-Cheng Huang ] * remove unused files * use epoch in package version number * add ssh key blacklists [ Stephen Hemminger ] * Allow non-livecd union install * install-system can only run from livecd [ Bob Gilligan ] * Bugfix: 3226 [ Robert Bays ] * fix ssh keygen on startup [ Mohit Mehta ] * - redo internal snmpv3 user creation for linkUpDownNotifications * Fix Bug 3751 configuring multiple global syslog facilities overwrites previous ones in /etc/syslog.conf [ Stephen Hemminger ] * Go back to simpler syslog config * Don't allow operator to reboot system [ Bob Gilligan ] * Bugfix: 3226 [ Stephen Hemminger ] * Revert "Set correct mode on configuration mode" * Set correct mode on configuration mode [ An-Cheng Huang ] * fix xen grub setup [ slioch ] * Revert "Change allow-root nodes to boolean" [ Stephen Hemminger ] * Change allow-root nodes to boolean [ Mohit Mehta ] * don't poll resolv files for nameserver changes - it messes up statistics [ rbalocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3735 [ Bob Gilligan ] * Bugfix: 3743 [ Mohit Mehta ] * Fix Bug 3609 - "show tech-support" does not display open file information for operator level user [ Bob Gilligan ] * Bugfix: 3727 * Bugfix: 3572 [ Stephen Hemminger ] * Standalone passwd reset prompt for password * Workaround problems with mkpasswd [ rbalocca ] * Add vyatta-grub-setup * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3712 [ Bob Gilligan ] * Bugfix: 3492 * Bugfix: 3515 * Bugfix: 3703 [ Stephen Hemminger ] * No longer need to turn off SACK * Allow any number of bridge devices * Allow any number of tunnel devices [ Rick Balocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3694 [ Mohit Mehta ] * Fix Bug 3607 Error setting DNS forwarding to use DHCP [ Stephen Hemminger ] * Don't need to list ifenslave twice * Add support for bonding [ Robert Bays ] * expose the union option in install-system * fix bug 3863 * Don't kill An-Cheng's commits. * change to native install from a USB stick * remove complex options from union install * changed union install to support multiple directories [ An-Cheng Huang ] * add postinst hook for install-system [ Mohit Mehta ] * use script for setting/deleting system nameservers * preserve system name-servers order in /etc/resolv.conf as configured in CLI * - change forced update wait time from 2 weeks to 4 weeks if no change in IP as per the free service provided by dyndns * - remove ddclient cache before restarting [ Robert Bays ] * fixes to install-system and grub-setup for xen hypervisor and device.map [ Mohit Mehta ] * - use apt per interface ddclient files [ Bob Gilligan ] * Account for size of diag partition when calculating disk size, which is needed [ Mohit Mehta ] * first attempt at implementing CLI support for Dynamic DNS * better worded warning when no name-servers set under 'system name- server' * released interface should be flagged as a warning rather than a commit failed [ Robert Bays ] * add functioanlity for binary images to install system [ Mohit Mehta ] * prompt warning for no nameservers if no nameservers set and no interface set to use dhcp [ Stephen Hemminger ] * Add support for aufs [ Mohit Mehta ] * polish up DNS forwarding error messages * show bridge interfaces in allowed values as well if configured to use dhcp * move from a 'ignore-interface' model to a 'listen-on' model for DNS forwarding * - get ddclient package for Dynamic DNS [ An-Cheng Huang ] * remove 2nd timeout to avoid 64-bit boot problem [ Bob Gilligan ] * Update install-system and grub-setup to handle RAID-1 configuration. [ Rick Balocca ] * Merge from "hollywood" [ rbalocca ] * Merge from "hollywood" [ Bob Gilligan ] * Add mdadm package to support RAID-1 configurations. [ Mohit Mehta ] * - servers being used for dns forwarding written to dnsmasq.conf with more info in comments * log dnsmasq output to /var/log/dnsmasq.log on start-up and whilst running (i.e. when sent a signal to log) * tighten the checks for checking the existence or removal or nameservers * tighten regex pattern to get dhclient resolv files [ Stig Thormodsrud ] * Change udevtrigger to udevadm trigger. [ Mohit Mehta ] * remove earlier added dnsmasq options * update dns forwarding nameservers on dhcp lease updates * any change in system name-servers should be communicated to dnsmasq * configure dnsmasq to use dns-servers as specified in CLI * use config rather than /etc/resolv.conf to get system set nameservers * code to specify DNS forwarding nameservers (system, dhcp, explicitly specified) using CLI * tighten syntax check * change 'service dns forward' to 'service dns forwarding' * this better detects the interfaces in /proc/net/dev [ Rick Balocca ] * Script cleanup [ Mohit Mehta ] * change DNS forwarding CLI from 'service dns-forwarding' to 'service dns forward' * add missing comma [ Mark O'Brien ] * control: added ifenslave-2.6 to debian control file [ rbalocca ] * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3542 [ Mohit Mehta ] * add command for user to enter interfaces on which not to listen for DNS queries * - add ability to set cache-size for DNS forwarding from CLI [ Rick Balocca ] * Cleanup * Additional fixes for http://bugzilla.vyatta.com/show_bug.cgi?id=3520 [ rbalocca ] * Fixes for: http://bugzilla.vyatta.com/show_bug.cgi?id=3520 http://bugzilla.vyatta.com/show_bug.cgi?id=3519 http://bugzilla.vyatta.com/show_bug.cgi?d for: http://bugzilla.vyatta.com/show_bug.cgi?id=3520 http://bugzilla.vyatta.com/show_bug.cgi?id=3519 http://bugzilla.vyatta.com/show_bug.cgi?id=3518 and perhaps others [ Mohit Mehta ] * First parts of DNS forwarding stuff [ Stig Thormodsrud ] * Add IPv6 address to comp_help for bridge/tunnel * Enable IPv6 forwarding. [ Stephen Hemminger ] * Get rid of debian build warning [ Rick Balocca ] * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3225 * Partial fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3225 [ Bob Gilligan ] * Bugfix: 3519 [ rbalocca ] * Since this packages changes the bash-completion conf file, it must be installed after bash-completion [ Mohit Mehta ] * add dnsmasq package to be included in the build [ rbalocca ] * The postinst was printing a '?' [ An-Cheng Huang ] * fix for bug 3459: make bash-completion use "builtin set". [ Mark O'Brien ] -- Mark O'Brien Tue, 25 Nov 2008 19:09:21 -0800 vyatta-cfg-system (0.14) unstable; urgency=low 3.1.4 [ Mark O'Brien ] [ Robert Bays ] * fix ssh keygen on startup [ An-Cheng Huang ] * remove unused files * use epoch in package version number * add ssh key blacklists [ Mark O'Brien ] -- Mark O'Brien Tue, 14 Oct 2008 17:30:18 -0700 vyatta-cfg-system (0.13) unstable; urgency=low 3.1.3 [ Mark O'Brien ] [ Bob Gilligan ] * Bugfix: 1292 * Bugfix: 1292 [ rbalocca ] * More spaces (bugs http://bugzilla.vyatta.com/show_bug.cgi?id=3549 and http://bugzilla.vyatta.com/show_bug.cgi?id=3552) * Fixes for bugs: http://bugzilla.vyatta.com/show_bug.cgi?id=3549 and http://bugzilla.vyatta.com/show_bug.cgi?id=3552 [ Rick Balocca ] * Merge from islavista * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3520 [ Mark O'Brien ] -- Mark O'Brien Tue, 19 Aug 2008 17:48:26 -0700 vyatta-cfg-system (0.12) unstable; urgency=low 3.1.2 [ Mark O'Brien ] [ Mohit Mehta ] * => Modified vyatta_update_resolv.pl to update (i.e. add and remove) 'name-server' and 'domain-name-server' options [ root ] * Fix 3359: changing telnet setting drops other telnet sessions. [ Stig Thormodsrud ] * Fix 3460: vrrp authentication error msg is wrong [ Stephen Hemminger ] * purge any old entries from sudoers * Don't add ide=nodma twice [ rbalocca ] * Remove debugging * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2807 [ Robert Bays ] * fix for bug 3095 [ Stephen Hemminger ] * Modify upgrade procedure for /etc/sudoers [ An-Cheng Huang ] * fix for bug 3417: use UUID in grub config file [ Stephen Hemminger ] * Fix problem if install-system run twice [ Bob Gilligan ] * Bugfix: 1592 [ Stephen Hemminger ] * Missing -e causes sudoers problem * Can't use logger in standalone * get rid of extra fi from last commit * Change syslogging of authorization related commands * Use logger to write system log * Make standalone password reset work * Handle multiple slashes in passwd [ Mark O'Brien ] -- Mark O'Brien Wed, 23 Jul 2008 21:35:54 -0700 vyatta-cfg-system (0.11) unstable; urgency=low 3.1.1 [ Mark O'Brien ] [ Stig Thormodsrud ] * Fix 3379: tunnel interfaces are artificially limited to tun0-tun9 * Add cli to enable proxy arp on a interface. [ Bob Gilligan ] * Bugfix: 1292 [ Stephen Hemminger ] * translate slash in password * Spellin fixes [ Auto Build ] * Remove dependency on grub-pc [ rbalocca ] * Insist on vyatta-keepalived * Additional dependencies [ Bob Gilligan ] * Bugfix: 3259 [ Stig Thormodsrud ] * Add module version for vrrp. * Fix 2030: Enhancement: VRRP preemption hold down timer [ Stephen Hemminger ] * Prompt for vyatta and root password * Use tr command rather than awk * Use UUID to find root filesystem * Surpress messages by default * Add passwd sync script [ Mark O'Brien ] -- Mark O'Brien Sat, 28 Jun 2008 11:22:12 -0700 vyatta-cfg-system (0.10) unstable; urgency=low 3.1.0 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3032: rename pre-glendale config files during install- system. [ Robert Bays ] * fix bug 3039 [ Stephen Hemminger ] * Turn off framebuffer (by default) [ Stig Thormodsrud ] * Fix 1818: Add disable option to vrrp. [ Stephen Hemminger ] * Enable vga framebuffer on console * Allow operator to run wanpipemon [ Bob Gilligan ] * Bugfix: 3305 [ Stig Thormodsrud ] * Fix 3328: operator can't issue "show vrrp". [ Stephen Hemminger ] * wrong option to useradd * Put vyatta users in the users group [ Stig Thormodsrud ] * Fix 787: Add a command to force vrrp state transition to backup [ Stephen Hemminger ] * Switch back to snmpd * Remove shell template (not ready yet). [ Robert Bays ] * fix for bugs 3294 and 3296 [ Stephen Hemminger ] * Turn off TCP SACK * Pull in vyatta version of snmpd [ Mohit Mehta ] * Fix Bug 3094 SMUX port is open to outside connections [ Stephen Hemminger ] * Allow any user to be in config file * Rework how user accounts are managed * re-indent login script * Add GPL license [ Tom Grennan ] * add libnetaddr-ip-perl dependency [ Stig Thormodsrud ] * Fix 2705: Add "clear vrrp process" command. * Fix vrrp snoop_for_master() to also work with AH authentication. * Make vrrp pcap filter more specific. * Fix 3273: "show vrrp summary" output doesn't line-up when using vlans * Fix 3155: setting the third vrrp member with the highest priority doesn't change (update) the backup [ rbalocca ] * Add vyatta-busybox to dependencies * Ignore derived files [ rbays ] * update install-system to work with xen setup [ Stig Thormodsrud ] * Fix 3251: vrrp should also send a gratuitous arp reply on master transition * Fix 3144: VRRP backup obtains VIP resulting in a duplicate IP situation. * Change dependancy from keepalived to vyatta-keepalived. [ rbays ] * fix install system to use the correct kernels in grub.cfg [ An-Cheng Huang ] * fix typo in rl-system.init [ Stephen Hemminger ] * Move sysctl configuration to /etc/vyatta-sysctl.conf [ Stig Thormodsrud ] * Set initial vrrp state based on existing state if available. [ rbalocca ] * Convert to our method of changelog creation [ Mohit Mehta ] * Modifications to send link up/down traps to configured trap-target * Modifications for enabling net-snmp's interaction with quagga for bgp, ospf and rip mib traversals [ Stephen Hemminger ] * watchlink is no longer used [ rbalocca ] * Pretty print the grub.cfg file * Partitions in grub-pc now start at 1 (instead of 0) * Update install-system to use grub-pc * Revert "remove deprecated install scripts" * config.boot.default is not moved to the top level repo (build- iso.git) [ Mohit Mehta ] * Fix Bug 3172 set interfaces tunnel <> key <> allowed after tunnel creation [ Stig Thormodsrud ] * Fix 3148: can't delete bridge interface [ Mohit Mehta ] * Fix Bug 3164 set interfaces tunnel tun0 remote-ip <> doesn't take effect after committing [ rbalocca ] * Merge from glendale [ Mohit Mehta ] * Bug 3069 Help strings should be standardized * Bug 3069 Help strings should be standardized * Fix Bug 3069 Help strings should be standardized * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI [ An-Cheng Huang ] * fix dependencies [ Stephen Hemminger ] * Allow operator to run ntpdate [ Mohit Mehta ] * Fix Bug 2778 VRRP: add ability to run scripts on state transition [ Tom Grennan ] * consolidate proc/sys flag settings to livecd/install hook * remove deprecated install scripts [ Mohit Mehta ] * Fix Bug 802 VRRP - add "show vrrp summary" command (TC 3.2.5.7.2) [ Stig Thormodsrud ] * Add tshark dependency on vyatta-cfg-system. [ Stephen Hemminger ] * Fix format of date from rl-system.init [ Mark O'Brien ] -- Mark O'Brien Tue, 17 Jun 2008 09:26:27 -0700 vyatta-cfg-system (0.9) unstable; urgency=low 3.0.5 -- Mark O'Brien Tue, 06 May 2008 12:43:15 -0700 vyatta-cfg-system (0.8) unstable; urgency=low 3.0.4 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3225: only insert sudoers if not present. [ Stig Thormodsrud ] * Mimic the transaction mechanism to only restart the vrrp daemon once/commit. [ rbalocca ] * config.boot.default is not moved to the top level repo (build- iso.git) [ Mark O'Brien ] -- Mark O'Brien Mon, 05 May 2008 16:40:35 -0700 vyatta-cfg-system (0.7) unstable; urgency=low 3.0.3 [ Mark O'Brien ] [ Stephen Hemminger ] * watchlink is no longer used [ rbalocca ] * Indicate the VC4.0.2 release candidate in the changelog [ Mark O'Brien ] -- Mark O'Brien Tue, 29 Apr 2008 16:42:17 -0700 vyatta-cfg-system (0.6) unstable; urgency=low VC4.0.2 -- Mark O'Brien Sat, 19 Apr 2008 11:56:03 -0700 vyatta-cfg-system (0.5) unstable; urgency=low VC4.0.2 release candidate [ Mark O'Brien ] [ Stig Thormodsrud ] * Fix 3148: can't delete bridge interface [ rbalocca ] * Remove vestigal version file from vyatta-cfg-system [ Mark O'Brien ] -- Mark O'Brien Wed, 16 Apr 2008 09:50:05 -0700 vyatta-cfg-system (0.4) unstable; urgency=low 3.0.2 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3032: rename pre-glendale config files during install- system. * fix for bug 3087: add proper dependency to ensure install order. [ Bob Gilligan ] * Bugfix: 3021 [ Mark O'Brien ] * Update version file to 3.0.1 * 3.0.1 [ Michael Larson ] * up proc limit for rmem_max to support zebra netlink buffer size increase. [ Mohit Mehta ] * Fix Bug 3027 Unable to configure SNMP community client address [ Robert Bays ] * fix bug 3039 [ Stephen Hemminger ] * Allow operator to run ntpdate [ Stig Thormodsrud ] * Add vrrp vip addresses to watchlink exclude file. * Fix 3086: VRRP only allows up to 20 virtual IPs [ rbalocca ] * Fix debian dependencies * Line up the colons with the one from the copyright notice (in show version) * Set dependencies on either bash or vyatta-bash * Move the copyright dates over (bug 3028) [ Mark O'Brien ] -- Mark O'Brien Fri, 04 Apr 2008 18:00:34 -0700 vyatta-cfg-system (0.3) unstable; urgency=low VC4.0.1 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 2083: add radius authentication support. [ Mark O'Brien ] * Update version file to VC4.0.1 [ Mohit Mehta ] * Fix Bug 2707 Missing from Glendale * CLI tab enhancement at "set interfaces ethernet <> address" [ Robert Bays ] * fixes for bugs 2499, 2967 [ Stephen Hemminger ] * add operator and admin to linux group adm * add option to disable root login over ssh * fix ssh allow-root template * put operator in operator group * add explicit list of commands in sudoers * don't allow illegal hostnames * allow numbers in hostname * allow non-root to clear nat counters * Replace VPL with GPLv2 * Changes for license/copyright * Update to GPLv2 * Move init-floppy to /opt/vyatta/sbin * Allow operator to set date. [ Stig Thormodsrud ] * Fix 2877: Bridge group can not be assiged to vif sub interfaceZ * Fix parse error in /etc/sudoers * Fix 2880 SNMP configuration file issues * Fix 2695 GRE tunnel doesn't work with "key" [ rbalocca ] * Fix for bug #2934 * Fix for bug #2542 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2542 ) * Fix for bug #2921 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2921 ) * Revert "Fix for bug #2921 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2921 )" * Improve the package repository template * Fix for bug #2969 ( http://bugzilla.vyatta.com/show_bug.cgi?id=2969 ) * Update copyright for "show version" [ Mark O'Brien ] -- Mark O'Brien Tue, 18 Mar 2008 19:03:58 -0700 vyatta-cfg-system (0.2) unstable; urgency=low vc4.0.0 [ Mark O'Brien ] [ An-Cheng Huang ] * clean up temp file in delete fail case * convert templates to new syntax * add commit check for user password * revise the password check * fix for bug 2768: add "dynamic" keyword to server entry. * template cleanup and fix for bug 2785: update /etc/mailname with hostname. * prevent ':' in full name (separator in passwd) * allow empty full-name * fix for bug 2547: don't require/output ':' after "hw-id". * fix for bug 2855: change help text * debian's latest update to "bash" (3.1dfsg-9) broke the completion mechanism. * fix for bug 2764: rename user level * use vyattacfg for config files [ Mark O'Brien ] * Updated syslog help with severity information. * Update version file to vc4.0.0 [ Michael Larson ] * bump up rmem_max limit to 223232 (in conjunction with fix for zebra) [ Stig Thormodsrud ] * update tunnel help strings with defaults * add a few missing help strings * - Fix 2745: bridge-group cost - syntax error * Fix 2819 Plain-text authentication should be identified as such. * Fix syntax error in "interface bridge <> priority". [ Tom Grennan ] * source /etc/default/vyatta instead of configuring install-system * remove stale CONFIG_PARTITION comments [ rbalocca ] * Add version file * Update version file to 4.0.0 * 4.0.0 * vyatta-cfg-system postinst was clobbering version file * These files will be changed by autobuild-git-eureak * Missing version file in Makefile.am [ Mark O'Brien ] -- Mark O'Brien Mon, 25 Feb 2008 17:38:40 -0800 vyatta-cfg-system (0.1) unstable; urgency=low * Initial Release. -- An-Cheng Huang Thu, 18 Oct 2007 11:03:18 -0700