#!/usr/bin/perl
#
# Module: vyatta-keepalived.pl
#
# **** License ****
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# This code was originally developed by Vyatta, Inc.
# Portions created by Vyatta are Copyright (C) 2007-2009 Vyatta, Inc.
# All Rights Reserved.
#
# Author: Stig Thormodsrud
# Date: October 2007
# Description: Script to glue vyatta cli to keepalived daemon
#
# **** End License ****
#

use lib "/opt/vyatta/share/perl5/";
use Vyatta::Config;
use Vyatta::Keepalived;
use Vyatta::TypeChecker;
use Vyatta::Interface;
use Vyatta::ConntrackSync;
use Vyatta::Misc;
use Getopt::Long;

use strict;
use warnings;

my ( $action, $vrrp_intf, $vrrp_group, $vrrp_vip, $ctsync );
my ( $conf_file, $changes_file );
my %HoA_sync_groups;
my $ctsync_script = "/opt/vyatta/sbin/vyatta-vrrp-conntracksync.sh";

sub validate_source_addr {
  my ( $ifname, $source_addr ) = @_;

  my @ipaddrs;
  if ( defined $source_addr ) {
    my %config_ipaddrs;
    my @ipaddrs = Vyatta::Misc::getInterfacesIPadresses('all');
    foreach my $ip (@ipaddrs) {
      if ( $ip =~ /^([\d.]+)\/([\d.]+)$/ ) {    # strip /mask
        $config_ipaddrs{$1} = 1;
      }
    }
    if ( !defined $config_ipaddrs{$source_addr} ) {
      vrrp_log("no hello-source");
      return "hello-source-address [$source_addr] must be "
        . "configured on the interface\n";
    }
    return;
  }

  # if the hello-source-address wasn't configured, check that the
  # interface has an IPv4 address configured on it.
  my $intf = new Vyatta::Interface($ifname);
  @ipaddrs = $intf->address(4);
  if ( scalar(@ipaddrs) < 1 ) {
    vrrp_log("no primary or hello-source");
    return "must configure either a primary address on [$ifname] or"
      . " a hello-source-address\n";
  }
  return;
}

sub get_ctsync_syncgrp {
  my ($origfunc) = @_;
  my $failover_sync_grp = undef;

  my $listnodesfunc = "listNodes";
  my $returnvalfunc = "returnValue";
  if ( defined $origfunc ) {
    $listnodesfunc = "listOrigNodes";
    $returnvalfunc = "returnOrigValue";
  }

  my @failover_mechanism =
    Vyatta::ConntrackSync::get_conntracksync_val( $listnodesfunc,
    "failover-mechanism" );

  if ( defined $failover_mechanism[0] && $failover_mechanism[0] eq 'vrrp' ) {
    $failover_sync_grp =
      Vyatta::ConntrackSync::get_conntracksync_val( $returnvalfunc,
      "failover-mechanism $failover_mechanism[0] sync-group" );
  }
  return $failover_sync_grp;
}

sub keepalived_get_values {
  my ( $intf, $path ) = @_;

  my @errs   = ();
  my $output = '';
  my $config = new Vyatta::Config;

  my $state_transition_script = get_state_script();

  vrrp_log("keepalived_get_values [$intf][$path]");
  $config->setLevel("$path vrrp vrrp-group");
  my @groups = $config->listNodes();
  foreach my $group (@groups) {
    my $vrrp_instance = "vyatta-$intf-$group";
    $config->setLevel("$path vrrp vrrp-group $group");
    if ( $config->exists("disable") ) {
      vrrp_log("$vrrp_instance disabled - skipping");
      my $state_file = get_state_file( $intf, $group );
      system("rm -f $state_file");
      next;
    }
    my @vips     = $config->returnValues("virtual-address");
    my $num_vips = scalar(@vips);
    if ( $num_vips == 0 ) {
      push @errs, "must define a virtual-address for vrrp-group $group\n";
      next;
    }
    if ( $num_vips > 20 ) {
      push @errs, "can not set more than 20 VIPs per group\n";
      next;
    }
    my $priority = $config->returnValue("priority");
    if ( !defined $priority ) {
      $priority = 1;
    }
    my $preempt = $config->returnValue("preempt");
    if ( !defined $preempt ) {
      $preempt = "true";
    }
    my $preempt_delay = $config->returnValue("preempt-delay");
    if ( defined $preempt_delay and $preempt eq "false" ) {
      print "Warning: preempt delay is ignored when preempt=false\n";
    }
    my $advert_int = $config->returnValue("advertise-interval");
    if ( !defined $advert_int ) {
      $advert_int = 1;
    }
    my $sync_group = $config->returnValue("sync-group");
    if ( defined $sync_group && $sync_group ne "" ) {
      push @{ $HoA_sync_groups{$sync_group} }, $vrrp_instance;
    }
    my $hello_source_addr = $config->returnValue("hello-source-address");
    my $err = validate_source_addr( $intf, $hello_source_addr );
    if ( defined $err ) {
      push @errs, $err;
      next;
    }

    $config->setLevel("$path vrrp vrrp-group $group authentication");
    my $auth_type = $config->returnValue("type");
    my $auth_pass;
    if ( defined $auth_type ) {
      $auth_type = "PASS" if $auth_type eq "simple";
      $auth_type = uc($auth_type);
      $auth_pass = $config->returnValue("password");
      if ( !defined $auth_pass ) {
        push @errs, "vrrp authentication password not set\n";
        next;
      }
    }

    $config->setLevel("$path vrrp vrrp-group $group run-transition-scripts");
    my $run_backup_script = $config->returnValue("backup");
    if ( !defined $run_backup_script ) {
      $run_backup_script = "null";
    }
    my $run_fault_script = $config->returnValue("fault");
    if ( !defined $run_fault_script ) {
      $run_fault_script = "null";
    }
    my $run_master_script = $config->returnValue("master");
    if ( !defined $run_master_script ) {
      $run_master_script = "null";
    }

    # We now have the values and have validated them, so
    # generate the config.

    $output .= "vrrp_instance $vrrp_instance \{\n";
    my $init_state;
    if ( defined $ctsync ) {

      # check if this group is part of conntrack-sync vrrp sync-group
      my $ctsync_syncgrp = get_ctsync_syncgrp();
      my $vrrpsyncgrp =
        list_vrrp_sync_group( $intf, $group, 'returnOrigPlusComValue' );
      if ( defined $ctsync_syncgrp
        && defined $vrrpsyncgrp
        && ( $ctsync_syncgrp eq $vrrpsyncgrp ) )
      {
        $init_state = 'BACKUP';
      } else {
        $init_state = vrrp_get_init_state( $intf, $group, $vips[0], $preempt );
      }
    } else {
      $init_state = vrrp_get_init_state( $intf, $group, $vips[0], $preempt );
    }
    $output .= "\tstate $init_state\n";
    $output .= "\tinterface $intf\n";
    $output .= "\tvirtual_router_id $group\n";
    $output .= "\tpriority $priority\n";
    if ( $preempt eq "false" ) {
      $output .= "\tnopreempt\n";
    }
    if ( defined $preempt_delay ) {
      $output .= "\tpreempt_delay $preempt_delay\n";
    }
    $output .= "\tadvert_int $advert_int\n";
    if ( defined $auth_type ) {
      $output .= "\tauthentication {\n";
      $output .= "\t\tauth_type $auth_type\n";
      $output .= "\t\tauth_pass $auth_pass\n\t}\n";
    }
    if ( defined $hello_source_addr ) {
      $output .= "\tmcast_src_ip $hello_source_addr\n";
    }
    $output .= "\tvirtual_ipaddress \{\n";
    foreach my $vip (@vips) {
      $output .= "\t\t$vip\n";
    }
    $output .= "\t\}\n";
    $output .= "\tnotify_master \"$state_transition_script master ";
    $output .= "$intf $group $run_master_script @vips\" \n";
    $output .= "\tnotify_backup \"$state_transition_script backup ";
    $output .= "$intf $group $run_backup_script @vips\" \n";
    $output .= "\tnotify_fault \"$state_transition_script fault ";
    $output .= "$intf $group $run_fault_script @vips\" \n";
    $output .= "\}\n\n";
  }

  return ( $output, @errs );
}

sub vrrp_get_sync_groups {

  my $output = "";

  foreach my $sync_group ( keys %HoA_sync_groups ) {
    $output .= "vrrp_sync_group $sync_group \{\n\tgroup \{\n";
    foreach my $vrrp_instance ( 0 .. $#{ $HoA_sync_groups{$sync_group} } ) {
      $output .= "\t\t$HoA_sync_groups{$sync_group}[$vrrp_instance]\n";
    }
    $output .= "\t\}\n";

    ## add conntrack-sync part here if configured ##
    my $origfunc = undef;
    $origfunc = 'true' if !defined $ctsync;
    my $failover_sync_grp = get_ctsync_syncgrp($origfunc);
    if ( defined $failover_sync_grp && $failover_sync_grp eq $sync_group ) {
      $output .= "\tnotify_master \"$ctsync_script master $sync_group\"\n";
      $output .= "\tnotify_backup \"$ctsync_script backup $sync_group\"\n";
      $output .= "\tnotify_fault \"$ctsync_script fault $sync_group\"\n";
    }
    $output .= "\}\n";
  }
  return $output;
}

sub vrrp_read_changes {
  my @lines = ();
  return @lines if !-e $changes_file;
  open( my $FILE, "<", $changes_file ) or die "Error: read $!";
  @lines = <$FILE>;
  close($FILE);
  chomp @lines;
  return @lines;
}

sub vrrp_save_changes {
  my @list = @_;

  my $num_changes = scalar(@list);
  vrrp_log("saving changes file $num_changes");
  open( my $FILE, ">", $changes_file ) or die "Error: write $!";
  print $FILE join( "\n", @list ), "\n";
  close($FILE);
}

sub vrrp_find_changes {

  my @list           = ();
  my $config         = new Vyatta::Config;
  my $vrrp_instances = 0;

  foreach my $name ( getInterfaces() ) {
    my $intf = new Vyatta::Interface($name);
    next unless $intf;
    my $path = $intf->path();
    $config->setLevel($path);
    if ( $config->exists("vrrp") ) {
      my %vrrp_status_hash = $config->listNodeStatus("vrrp");
      my ( $vrrp, $vrrp_status ) = each(%vrrp_status_hash);
      if ( $vrrp_status ne "static" ) {
        push @list, $name;
        vrrp_log("$vrrp_status found $name");
      }
    }

    #
    # Now look for deleted from the origin tree
    #
    $config->setLevel($path);
    if ( $config->isDeleted("vrrp") ) {
      push @list, $name;
      vrrp_log("Delete found $name");
    }

  }

  my $num = scalar(@list);
  vrrp_log("Start transation: $num changes");
  if ($num) {
    vrrp_save_changes(@list);
  }
  return $num;
}

sub remove_from_changes {
  my $intf = shift;

  my @lines = vrrp_read_changes();
  if ( scalar(@lines) < 1 ) {

    #
    # we shouldn't get to this point, but try to handle it if we do
    #
    vrrp_log("unexpected remove_from_changes()");
    system("rm -f $changes_file");
    return 0;
  }
  my @new_lines = ();
  foreach my $line (@lines) {
    if ( $line =~ /$intf$/ ) {
      vrrp_log("remove_from_changes [$line]");
    } else {
      push @new_lines, $line;
    }
  }

  my $num_changes = scalar(@new_lines);
  if ( $num_changes > 0 ) {
    vrrp_save_changes(@new_lines);
  } else {
    system("rm -f $changes_file");
  }
  return $num_changes;
}

sub vrrp_update_config {

  my @errs   = ();
  my $date   = localtime();
  my $output = "#\n# autogenerated by $0 on $date\n#\n\n";

  my $config         = new Vyatta::Config;
  my $vrrp_instances = 0;

  foreach my $name ( getInterfaces() ) {
    my $intf = new Vyatta::Interface($name);
    next unless $intf;
    my $path = $intf->path();
    $config->setLevel($path);
    if ( $config->exists("vrrp") ) {

      #
      # keepalived gets real grumpy with interfaces that
      # don't exist, so skip vlans that haven't been
      # instantiated yet (typically occurs at boot up).
      #
      if ( !( -d "/sys/class/net/$name" ) ) {
        push @errs, "$name doesn't exist";
        next;
      }
      my ( $inst_output, @inst_errs ) = keepalived_get_values( $name, $path );
      if ( scalar(@inst_errs) ) {
        push @errs, @inst_errs;
      } else {
        $output .= $inst_output;
        $vrrp_instances++;
      }
    }
  }

  if ( $vrrp_instances > 0 ) {
    my $sync_groups = vrrp_get_sync_groups();
    if ( defined $sync_groups && $sync_groups ne "" ) {
      $output = $sync_groups . $output;
    }
    keepalived_write_file( $conf_file, $output );
  }
  return ( $vrrp_instances, @errs );
}

sub keepalived_write_file {
  my ( $file, $data ) = @_;

  open( my $fh, '>', $file ) || die "Couldn't open $file - $!";
  print $fh $data;
  close $fh;
}

#
# main
#
GetOptions(
  "vrrp-action=s" => \$action,
  "intf=s"        => \$vrrp_intf,
  "group=s"       => \$vrrp_group,
  "vip=s"         => \$vrrp_vip,
  "ctsync=s"      => \$ctsync,
);

#
# This script can be called from two places :
# 1. a vrrp node under one of the interfaces
# 2. service conntrack-sync when conntrack-sync uses VRRP as failover-mechanism
#
# when called from conntrack-sync; we just need to add/remove config for sync-group
# transition scripts and restart daemon. We do NOT perform any other actions
# usually done in the update part of this script otherwise 
#

if ( !defined $action ) {
  print "no action\n";
  exit 1;
}

if ( !defined $ctsync ) {

  # make sure sync-group used by ctsync has not been deleted

  my $failover_sync_grp = get_ctsync_syncgrp();
  if ( defined $failover_sync_grp ) {

    # make sure vrrp sync-group exists
    my $sync_grp_exists = 'false';
    my @vrrp_intfs      = list_vrrp_intf('exists');
    foreach my $vrrp_intf (@vrrp_intfs) {
      my @vrrp_groups = list_vrrp_group( $vrrp_intf, 'listNodes' );
      foreach my $vrrp_group (@vrrp_groups) {
        my $sync_grp =
          list_vrrp_sync_group( $vrrp_intf, $vrrp_group, 'returnValue' );
        if ( defined $sync_grp && $sync_grp eq "$failover_sync_grp" ) {
          $sync_grp_exists = 'true';
          last;
        }
      }
      last if $sync_grp_exists eq 'true';
    }

    if ( $sync_grp_exists eq 'false' ) {
      print "sync-group $failover_sync_grp used for conntrack-sync"
        . " is either deleted or undefined\n";
      exit 1;
    }
  }

}

if ( $action eq "update" ) {
  $changes_file = get_changes_file();
  $conf_file    = get_conf_file();
  vrrp_log("vrrp update $vrrp_intf")     if defined $vrrp_intf;
  vrrp_log("vrrp update conntrack-sync") if defined $ctsync;
  if ( !-e $changes_file ) {
    my $num_changes = vrrp_find_changes();
    if ( $num_changes == 0 ) {

      #
      # Shouldn't happen, but ...
      #
      vrrp_log("unexpected 0 changes");
    }
  }
  my ( $vrrp_instances, @errs ) = vrrp_update_config();
  my $more_changes = 0;
  $more_changes = remove_from_changes($vrrp_intf) if !defined $ctsync;
  vrrp_log(" instances $vrrp_instances, $more_changes");
  if ( $vrrp_instances > 0 and $more_changes == 0 ) {
    restart_daemon($conf_file);
  }
  if ( $vrrp_instances == 0 ) {
    stop_daemon();
    system("rm -f $conf_file");
  }
  if ( scalar(@errs) ) {
    print join( "\n", @errs );
    vrrp_log( join( "\n", @errs ) );
    exit 1;
  }
  exit 0;
}

if ( $action eq "delete" ) {
  if ( !defined $vrrp_intf || !defined $vrrp_group ) {
    print "must include interface & group";
    exit 1;
  }
  vrrp_log("vrrp delete $vrrp_intf $vrrp_group");
  my $state_file = get_state_file( $vrrp_intf, $vrrp_group );
  system("rm -f $state_file");
  exit 0;
}

if ( $action eq "check-vip" ) {
  if ( !defined $vrrp_vip ) {
    print "must include the virtual-address to check";
    exit 1;
  }
  my $rc = 1;
  if ( $vrrp_vip =~ /\// ) {
    $rc = Vyatta::TypeChecker::validateType( 'ipv4net', $vrrp_vip, 1 );
  } else {
    $rc = Vyatta::TypeChecker::validateType( 'ipv4', $vrrp_vip, 1 );
  }
  exit 1 if !$rc;
  exit 0;
}

if ( $action eq "list-vrrp-intf" ) {
  my @intfs = list_vrrp_intf();
  print join( ' ', @intfs );
  exit 0;
}

if ( $action eq "list-vrrp-group" ) {
  if ( !defined $vrrp_intf ) {
    print "must include interface\n";
    exit 1;
  }
  my @groups = list_vrrp_group($vrrp_intf);
  print join( ' ', @groups );
  exit 0;
}

exit 0;

# end of file