path: root/scripts/install/install-functions

#! /bin/bash

# this provides environment and functions needed by install scripts.
# must be sourced by the scripts.

if [ -e /etc/default/vyatta ] ; then
  . /etc/default/vyatta
fi

: ${vyatta_prefix:=/opt/vyatta}
: ${vyatta_exec_prefix:=$vyatta_prefix}
: ${vyatta_bindir:=${vyatta_exec_prefix}/bin}
: ${vyatta_sysconfdir:=${vyatta_prefix}/etc}

# trap signals so we can kill runaway progress indicators
trap 'progress_indicator stop; exit 1' 1
trap 'progress_indicator stop; exit 1' 2

# mount point for the install root.
# for union install, this is a r/w union mount.
# for non-union install, this is the root partition mount.
INST_ROOT=/mnt/inst_root

# mount point for the writable root, i.e., the root partition.
# this is only used for union install.
WRITE_ROOT=/mnt/wroot

# mount point for the readonly squashfs mount.
# this is only used for union install.
READ_ROOT=/mnt/squashfs

# mount point for the ISO image.
# this is only used when installing with an ISO image file
# (instead of from a live CD boot).
CD_ROOT=/mnt/cdrom

# mount point for the squashfs image in the ISO image.
# this is only used when installing with an ISO image file
# (instead of from a live CD boot).
CD_SQUASH_ROOT=/mnt/cdsquash

# the vyatta config dir
VYATTA_CFG_DIR=${vyatta_sysconfdir}/config

# the floppy config dir
FD_CFG_DIR=/media/floppy/config

# PROGRESS_PID can be exported by top-level script
progress_indicator () {
  local spid=$PROGRESS_PID
  if [ -z "$spid" ]; then
    spid=$$
  fi
  case "$1" in
    start)
      $vyatta_bindir/progress-indicator $spid &
      ;;
    *)
      if ! rm /tmp/pi.$spid 2>/dev/null; then
        sleep 1
        rm /tmp/pi.$spid 2>/dev/null
      fi
      sleep 1
      echo -n -e "\b"
      ;;
  esac
}

# echo to log. uses INSTALL_LOG if set.
lecho ()
{
  local log=$INSTALL_LOG
  if [ -z "$log" ]; then
    log=/tmp/install-$$.log
  fi
  echo -e "$*" >>$log
}

# echo to both.
becho ()
{
  lecho "$*"
  echo -e "$*"
}

# Validates a user response.  Returns the response if valid.
# Returns the default is the user just hits enter.  
# Returns nothing if not valid.  Default parameter is $1.
# Options are in $2.  If options are defined return must be a member
# of the enum. 
get_response () {
  ldefault=$(echo "$1" | tr [:upper:] [:lower:])
  loptions=$(echo "$2" | tr [:upper:] [:lower:])

  # get the response from the user
  read myresponse
  myresponse=$(echo "$myresponse" | tr [:upper:] [:lower:])

  # Check to see if the user accepts the default
  if [ -z "$myresponse" ]; then
    echo -n $ldefault
  elif [ -n "$loptions" ]; then
    # make sure response is a valid option
    for token in $loptions
      do
        if [ "$token" == "$myresponse" ]; then
          echo -n "$myresponse"
          return 0
        fi
      done
    return 1
  else
    echo -n "$myresponse"
  fi

  return 0
}

# turn off any mounted swap partitions
turnoffswap () {
  if [ -f "/proc/swaps" ]; then
    myresponse=$(cat /proc/swaps)
    if [ -n "$myresponse" ]; then
      lecho "turning off swaps..."
      swapoff -a
    fi
  fi
}

# Return the size of the drive in MB
get_drive_size () {
  ldrive=$1

  # Make sure you can print disk info using parted
  parted /dev/$ldrive p >/dev/null 2>&1

  # If unable to read disk, it's likely it needs a disklabel
  if [  "$?" != "0" ]; then
    lecho "Creating a new disklabel on $ldrive"
    lecho "parted /dev/$ldrive mklabel msdos"
    output=$(parted /dev/$ldrive mklabel msdos)

    # Get the drive size from parted
    lsize=$(parted /dev/$ldrive p | grep "^Disk" | awk '{ print $3 }')

    if [ $(echo $lsize | grep error) ]; then
      echo "Unable to read disk label.  Exiting."
      exit 1
    fi
  fi

  # Get the drive size from parted
  lsize=$(parted /dev/$ldrive p | grep "^Disk" | awk '{ print $3 }')
  # Get the reported units (mB, GB, kB)
  lmodifier=$(echo $lsize | sed 's/[0-9\.]//g')
  # remove the modifier
  lsize=$(echo $lsize | sed 's/[a-z,A-Z]//g')
  # Remove any fractions
  lsize=$(echo $lsize | cut -f1 -d'.')
  # Translate our size into mB if not there already
  if [ $lmodifier = "GB" ]; then 
    lsize=$(($lsize * 1000))
  elif [ $lmodifier = "kB" ]; then 
    lsize=$(($lsize / 1000))
  fi

  echo $lsize
}

# Probe hardrives not shown in /proc/partitions by default
probe_drives () {
  # Find drives that may not be in /proc/partitions since not mounted
  drive=$(ls /sys/block  | grep '[hsv]d.')

  # now exclude all drives that are read-only
  for drive in $drive; do
    if [ $(cat /sys/block/$drive/ro) -ne 0 ]; then
      output=$(mount | grep $drive)
      if [ -z "$output" ]; then
        output=$(parted /dev/$drive p)
      fi
    fi
  done
}

# Display text $1 before choice.
# Sets the variable named by $2.
# Note that select_drive should be wrapped 
# in the verification loop, not the included get_response.
select_drive () {
  local msg=$1
  local outvar=$2
  local drv=''
  # list the drives in /proc/partitions.  Remove partitions and empty lines.
  # the first grep pattern looks for devices named c0d0, hda, and sda.
  drives=$(cat /proc/partitions | \
           awk '{ if ($4!="name") { print $4 } }' | \
           egrep "c[0-9]d[0-9]$|[hsv]d[a-z]$" | \
           egrep -v "^$")

  # take the first drive as the default
  drv=$(echo $drives | /usr/bin/awk '{ print $1 }')

  # Add the drive sizes to the display to help the user decide
  display=''
  for drive in $drives; do
    size=$(get_drive_size $drive)
    display="$display $drive\t$size"MB"\n"
  done

  while true; do
    # Display the drives and ask the user which one to install to
    echo -e "$display"
    echo
    echo -n "$1 [$drv]:"
    response=$(get_response "$drv" "$drives") && break
  done
  eval "$outvar=$response"

  echo
}

# $1: user name
# $2: encrypted password
# $3: config file
set_encrypted_password () {
  sed -i -e \
    "/ user $1 {/,/}/s/encrypted-password.*\$/encrypted-password \"$2\"/" $3
}

# interactively prompt user to change password for the specified account in
# the specified config file
# $1: account name
# $2: config file
change_password() {
  local user=$1
  local config=$2
  local pwd1="1"
  local pwd2="2"

  until [ "$pwd1" == "$pwd2" ]; do
    read -p "Enter $user password:" -r -s pwd1 <>/dev/tty 2>&0
    echo
    read -p "Retype $user password:" -r -s pwd2 <>/dev/tty 2>&0
    echo

    if [ "$pwd1" != "$pwd2" ]; then
      echo "Passwords do not match"
    fi
  done

  # escape any slashes in resulting password
  local epwd=$(mkpasswd -H md5 "$pwd1" | sed 's:/:\\/:g')
  set_encrypted_password "$user" "$epwd" "$config"
}

# returns true if it's a live cd boot
is_live_cd_boot ()
{
  if grep -q ' /live/image [^ ]\+ ro' /proc/mounts; then
    return 0
  else
    return 1
  fi
}

# returns true if it's a union-install boot
is_union_install ()
{
  if is_live_cd_boot; then
    return 1
  fi
  if grep -q ' /live/image [^ ]\+ rw' /proc/mounts \
      && grep -q 'unionfs / unionfs ' /proc/mounts; then
    return 0
  else
    return 1
  fi
}

# outputs the version string of the current running version.
get_cur_version ()
{
  ver=`dpkg-query --showformat='${Version}' --show vyatta-version`
  if [ -z "$ver" ]; then
      echo "UNKNOWN"
  else
      echo $ver
  fi
}

# outputs the version string of the new version, i.e., the version that is
# being installed. this can be from live CD boot or from a ISO image file.
get_new_version ()
{
  ver_path=/var/lib/dpkg/status
  ver_file=${CD_SQUASH_ROOT}${ver_path}
  if [ -f "$ver_file" ]; then
    # CD_SQUASH_ROOT is set up => we are installing with a specified ISO
    # image file. use the version string from there.
    dpkg -l --root=${CD_SQUASH_ROOT} | \
	grep "^..  vyatta-version " | awk '{print $3}'
    return
  fi

  ver_file=${ver_path}
  if is_live_cd_boot && [ -f "$ver_file" ]; then
    # we are installing from a live CD boot
    ver=`dpkg-query --showformat='${Version}' --show vyatta-version`
    echo $ver
    return
  fi

  # couldn't find it
}

# try to mount. log any errors and return the appropriate status.
# $1: arguments for mount
try_mount ()
{
  args="$*"
  output=$(eval "mount $args 2>&1")
  status=$?
  if [ $status == 0 ]; then
    return 0
  fi
  # error
  cat <<EOF
Error trying to mount a partition/directory.
Please see $INSTALL_LOG for details.
EOF
  lecho 'Error trying to mount a partition/directory.'
  lecho "mount $args\n$output"
  return 1
}