vyatta-cfg (0.14.24) unstable; urgency=low * nested priority case under interfaces need mkdir with -p option to set -- slioch Wed, 25 Feb 2009 10:06:21 -0800 vyatta-cfg (0.14.23) unstable; urgency=low * replace unionfs synchronization code with piecewise copy. this should fix most of the problems related to nested priorities (but not all). also moved node profiling output from debug file -- slioch Tue, 24 Feb 2009 13:15:46 -0800 vyatta-cfg (0.14.22) unstable; urgency=low * move ospf/rip before interface -- Stephen Hemminger Fri, 20 Feb 2009 16:22:18 -0800 vyatta-cfg (0.14.21) unstable; urgency=low * changes in priority to support bgp process start/stop. * adjust priority file to push root nodes of protocol before sub nodes to ensure that daemons stop/stop are -- slioch Thu, 19 Feb 2009 20:45:24 -0800 vyatta-cfg (0.14.20) unstable; urgency=low * Typo in regex for vtun -- Stephen Hemminger Thu, 19 Feb 2009 10:01:34 -0800 vyatta-cfg (0.14.19) unstable; urgency=low * fix for bug 4138: reset *glob after completion -- An-Cheng Huang Wed, 18 Feb 2009 16:58:03 -0800 vyatta-cfg (0.14.18) unstable; urgency=low [ slioch ] * need to add service to priority file. [ Bob Gilligan ] * Add type check function for firewall IPv6 src/dst address parameters [ Stephen Hemminger ] * Remove no longer used protocol/disable entries [ Bob Gilligan ] -- Bob Gilligan Wed, 18 Feb 2009 16:52:03 -0800 vyatta-cfg (0.14.17) unstable; urgency=low [ slioch ] * fixed vrrp configuration error by placing vrrp under vif after vif interface is created. this * removing incorrect placement of node.tag on firewall/group priority [ Stephen Hemminger ] * Add Vyatta::Interface::get_interfaces -- Stephen Hemminger Wed, 18 Feb 2009 10:18:57 -0800 vyatta-cfg (0.14.16) unstable; urgency=low [ Stephen Hemminger ] * change bgp disable node priority [ slioch ] * added generic commit failed message on any portion of the configuration failing. To get * added dump transaction support to write to stdout rather than redirected /tmp/cfg-stdout.log * added additional debug output and fixed dumping of trans nodes to screen. added default -- slioch Tue, 17 Feb 2009 16:47:46 -0800 vyatta-cfg (0.14.15) unstable; urgency=low [ slioch ] * provide non-default priorities to load-balancing and cluster so these [ Stephen Hemminger ] * Add hook for starting protocols -- Stephen Hemminger Mon, 16 Feb 2009 08:57:43 -0800 vyatta-cfg (0.14.14) unstable; urgency=low * enable new cli. * typo on setting firewall group priority. * removed priority specification for vrrp. checked with stig and it doesn't sound like priorities -- slioch Fri, 13 Feb 2009 09:06:22 -0800 vyatta-cfg (0.14.13) unstable; urgency=low [ Mohit Mehta ] * Fix Bug 3385 in completion script, thus, also fixing Bug 4120 [ slioch ] * fixed reversed priority for bgp parameters and [ Stephen Hemminger ] * Add new option for checking name validity * Remove script for vyatta-cfg-reload -- Stephen Hemminger Wed, 11 Feb 2009 21:54:57 -0800 vyatta-cfg (0.14.12) unstable; urgency=low [ Stig Thormodsrud ] * Force firewall group to be configured before firewall. [ Stephen Hemminger ] * Change order of config load -- Stephen Hemminger Sun, 08 Feb 2009 15:47:06 -0800 vyatta-cfg (0.14.11) unstable; urgency=low * Move config reload from quagga to vyatta-cfg -- Stephen Hemminger Thu, 05 Feb 2009 14:47:22 -0800 vyatta-cfg (0.14.10) unstable; urgency=low * Vyatta::Config - parseTmpl convert to 3 arg open * Fix boolean error -- Stephen Hemminger Thu, 05 Feb 2009 11:46:46 -0800 vyatta-cfg (0.14.9) unstable; urgency=low * Add type checking functions for 16- and 32-bit hexadecimal values. -- Bob Gilligan Wed, 04 Feb 2009 14:52:25 -0800 vyatta-cfg (0.14.8) unstable; urgency=low * Revert "Cleanup confg library" * Vyatta::Config::returnValue - change to three argument open * Vyatta::Config - fix perlcritic warnings from dangling return * Vyatta::Config - simplify boolean * Vyatta::Config - don't use global handle for opendir * Vyatta::ConfigOutput - test for exists should not use defined * Vyatta::Config - exists simplification -- Stephen Hemminger Wed, 04 Feb 2009 11:08:50 -0800 vyatta-cfg (0.14.7) unstable; urgency=low * Reindent load config for clarity * Simplify logic * Replace bare file handle with variable * Simplify and add strict checks * Missing semicolon * Cleanup config library -- Stephen Hemminger Wed, 04 Feb 2009 09:25:57 -0800 vyatta-cfg (0.14.6) unstable; urgency=low * ConfigOutput: Fix perlcritic warning * Vyatta::Misc - Fix perl critic warnings * DOMTree: Fix perlcritic warnings -- Stephen Hemminger Mon, 26 Jan 2009 17:02:11 -0800 vyatta-cfg (0.14.5) unstable; urgency=low [ slioch ] * expose new cli functions in cfg library. * add lib to link when building vyatta-cfg so [ Stephen Hemminger ] * Cleanup type checker * config load: fix perlcritic warnings * config load: avoid possible bug in getConfigDiff * save_config: fix perlcritic warnings -- Stephen Hemminger Mon, 26 Jan 2009 16:52:25 -0800 vyatta-cfg (0.14.4) unstable; urgency=low [ Stephen Hemminger ] * Fix regression in Vyatta::Misc * Fix isIPinInterfaces * update unit tests [ Bob Gilligan ] * Add more IPv6 address and prefix validation functions. -- Bob Gilligan Thu, 22 Jan 2009 13:35:03 -0800 vyatta-cfg (0.14.3) unstable; urgency=low [ Stephen Hemminger ] * Ignore IPV6 addresses in getInterfacesIPadresses * Fix problems with test program * Add test for is_ip_v4 * Better usage of NetAddr::IP [ An-Cheng Huang ] -- An-Cheng Huang Wed, 14 Jan 2009 17:29:39 -0800 vyatta-cfg (0.14.2) unstable; urgency=low * Remove unused functions * Use getservbyname to find ports * Simplfy and cleanup misc interfaces * Use new interfaces routines -- Stephen Hemminger Mon, 12 Jan 2009 16:50:53 -0800 vyatta-cfg (0.14.1) unstable; urgency=low [ Stephen Hemminger ] * Avoid overhead of modprobe * Optimize for size * Simplify the debug code * Implement touch in perl * Use perl mkdir * Use perl unlink rather than rm * Use grep -c rather than running wc command * Check result of system commands [ Mohit Mehta ] * rectify check for bond interface * move submodules to VyattaMisc.pm so that they can be used elsewhere as well * check dhcp for bond vif interfaces as well * add check for bond vif interface to submodule [ An-Cheng Huang ] * add support for development build [ Mohit Mehta ] * move submodule to get interface related info to VyattaMisc * Fix Bug 3917 dhcp brings interface up for lease acquire/renew even though interface has been disabled in CLI [ Stephen Hemminger ] * Convert VyattaConfig (et al) to Vyatta::Config * Need to fix some stuff from change to Vyatta:: * export getPortRuleString [ Stig Thormodsrud ] * "save" command broken - fix spelling error. * "show interfaces" broken. Use new perl hierarchy. [ Stephen Hemminger ] * Use vyatta-link-detect * Need full path to link-detect [ Stig Thormodsrud ] * Fix 3991: Unable to configure DHCP server on a multinetted interfaceZ [ An-Cheng Huang ] * update maintainer information * "files" file should be removed before package build [ slioch ] * initial checkin of new commit code--building but does not replace original commit. New commit may be accessed through * removed tmp file that shouldn't have been committed. [ An-Cheng Huang ] * update Build-Depends and Depends * update .gitignore [ Stig Thormodsrud ] * Fix 3626: Not all protocol numbers are accepted in firewall rules. * Fix 3815: FW: Hyphenated port names treated as ranges in firewall rules. [ slioch ] * alter return check for dirctory copy on successful completion of node processing. * mod to make it easier to switch between commits [ Stephen Hemminger ] * New Vyatta::Interface infrastructure [ An-Cheng Huang ] -- An-Cheng Huang Thu, 08 Jan 2009 09:27:14 -0800 vyatta-cfg (0.14) unstable; urgency=low 3.2.0 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3922: disable "vpn" command for operators. [ Stig Thormodsrud ] * Fix 3919: Operator level users cannot issue ping6 command [ Mohit Mehta ] * Fix Bug 3808 - OpenVPN accepts non-existent local-host option [ Stephen Hemminger ] * Allow dhcp on bonding * Set history timestamp at start of shell [ Stig Thormodsrud ] * Fix 3505: cli crash on delete of ipv6net static route. [ Stephen Hemminger ] * Fix dhcp on bonding * Expand shell history [ Bob Gilligan ] * Bugfix: 3807: Typo in config template for interfaces/loopback. * Bugfix: 3655 [ Stephen Hemminger ] * Enforce restrictions on loopback name * enforce syntax restrictions on ethernet device names * reboot not allowed from operator level * Revert my bad idea * Fix permissions of config file during upgrade [ Mohit Mehta ] * Fix Bug 3770 vpn pre-shared keys should be obscured in "show configuration" [ rbalocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2138 [ slioch ] * fix for regression bug 3758. added additional check requiring opening and closing quotes before stripping takes place. * fix for bug 3666. strip off leading and trailing quote from default text values that are deleted. default values are treated [ rbalocca ] * Simplify the code * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3680 (floppy config not loaded) [ Stephen Hemminger ] * Add entry for upcoming bonding [ Stig Thormodsrud ] * Allow operator user to execute top level "update" node. [ Stephen Hemminger ] * Handle special files in aufs * Fix build warnings * Allow use of aufs [ slioch ] * strip off whitespace in default value parsed from node.def file-- fixes problem of deleting time-zone value without [ An-Cheng Huang ] * fix for bug 3280: ignore password etc. in history [ Stephen Hemminger ] * Vtysh is not in sbindir * Change back to vyatta-vtysh * Replace vyatta-vtysh with vtysh [ Stig Thormodsrud ] * Move is_ip_v4_or_v6() to VyattaMisc.pm so other scripts can use it. * Add curl package for bug 3143. [ Mohit Mehta ] * Fix Bug 3524 dhcp client doesn't insert default route on system reboot [ Stephen Hemminger ] * Use vtysh directly * mark vyatta-cfg as bash not sh script * Optimize delete * Optimize commit * Turn my_wrappers into macros * Avoid overhead of system * Avoid needless calls to system() * Add missing include * Add annotation to cli functions [ Stig Thormodsrud ] * Add ipv6 address to comp_help. [ Stephen Hemminger ] * type_to_name returns immutable string [ Stig Thormodsrud ] * Fix 3505: cli crashes on ipv6net type. [ rbalocca ] * Remove spurious error message during install [ root ] * fix for bug 1130. disable ctrl-c during load command to prevent partial load. [ Mohit Mehta ] * Fix bug 3318 * Fix Bug 3318 ENHANCEMENT REQUEST: Option to NOT Accept DHCP MTU Offers Below Specified Value [ Mark O'Brien ] -- Mark O'Brien Tue, 25 Nov 2008 19:09:37 -0800 vyatta-cfg (0.13) unstable; urgency=low 3.1.3 [ Mark O'Brien ] [ Mohit Mehta ] * fix bug 3524 dhcp client doesn't insert default route on system reboot [ Mark O'Brien ] -- Mark O'Brien Tue, 19 Aug 2008 17:48:27 -0700 vyatta-cfg (0.12) unstable; urgency=low 3.1.2 [ Mark O'Brien ] [ Rick Balocca ] * Code moved for fix of bug http://bugzilla.vyatta.com/show_bug.cgi?id=3417 [ Stig Thormodsrud ] * Prioritize vpn ahead of pppo[ea] interfaces. [ Mohit Mehta ] * removing code to update resolv.conf from here, it is better to call it from dhclient-script * => Modified VyattaConfig.pm function 'returnOrigValues()' to return empty array when no value is configured [ Michael Larson ] * fix for bug 3441. Selective stripping of the 'def' only needs to occur in one location. * Revert "fix for bug 3441. Removed def from listOutputNodes(), which allowed other code that filters out def file to be removed." [ root ] * fix for bug 3441. Removed def from listOutputNodes(), which allowed other code that filters out def file to be removed. [ rbalocca ] * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3427 [ An-Cheng Huang ] * fix for bug 3323: skip deletions of nodes with default values when loading [ Michael Larson ] * fix for bug 3216. added no escape option to push path for environmental path variable. note this is appied to all c code access to the [ Stig Thormodsrud ] * Partial fix for 3383: check for vyatta-config-version, warn/prompt that it appears to be invalid config. [ Michael Larson ] * fix for bug 3377. [ An-Cheng Huang ] * fix for bug 3403: allocate correct amount of memory for multi-valued nodes. [ Michael Larson ] * Revert "set load-balancing load order after interfaces are configured on load." [ Stig Thormodsrud ] * Fix 3396: "commit failed at rank 800" while booting with bgp peer- group. [ An-Cheng Huang ] * add help string for "copy" and "rename" [ Michael Larson ] * fix for bug 3400. user vyatta needed modification to discard command. * set load-balancing load order after interfaces are configured on load. [ Mark O'Brien ] -- Mark O'Brien Wed, 23 Jul 2008 21:36:00 -0700 vyatta-cfg (0.11) unstable; urgency=low 3.1.1 [ Mark O'Brien ] [ Mohit Mehta ] * add top level op-mode commands: 'connect', 'delete', 'disconnect', and 'terminal' [ Michael Larson ] * fixed non-root user access for discard. also moved help string. [ Stig Thormodsrud ] * Fix 2619: Implement something similar to Juniper's "show | display set" functionality. * Fix 3143: Unable to save/load config from a remote server. [ Mohit Mehta ] * add release and renew to allowed-op file so that operator is able to execute them * better handling of allowed values for 'release/renew dhcp interface <>' [ rbalocca ] * Add dependency [ Mohit Mehta ] * better handling of dhcp release/renew commands * Fix bug 3059 Operator Level commands for DHCP client [ Stig Thormodsrud ] * Add a config ranking to prioritize bgp route-id ahead of neighbors. [ Mohit Mehta ] * -> redo the way dhcp client works. instead of using one daemon for all interfaces, [ Bob Gilligan ] * Bugfix: 3355 [ An-Cheng Huang ] * fix for bug 2622: add "copy" and "rename" commands for configuration mode. [ Michael Larson ] * fix for bug 110. added discard command to configure mode. This command deletes local changes and keeps the user in configure mode. * fix for bug 3347--skip def file.o [ Mark O'Brien ] -- Mark O'Brien Sat, 28 Jun 2008 11:22:15 -0700 vyatta-cfg (0.10) unstable; urgency=low 3.1.0 [ Mark O'Brien ] [ Stig Thormodsrud ] * Block reboot from config mode. * Add exception for /31 and /32 for ipv4 and /128 for ipv6 * Fix 920: System allows configuration of invalid IP Address for subnet [ rbalocca ] * Ignore log file * Fix for bug #3274 https://bugzilla.vyatta.com/show_bug.cgi?id=3274 [ Stig Thormodsrud ] * Force "protocols ospf parameters" to be committed before other ospf config. [ Stephen Hemminger ] * Avoid any problems with non-device entries in /sys/class/net * Remove unused dependencies [ Stig Thormodsrud ] * Fix vlan regex. [ An-Cheng Huang ] * fix for bug 3239: now support regex-based ordering for startup config [ Stig Thormodsrud ] * Add more granularity to config rank (commit rip, ospf, bgp separately). [ rbalocca ] * Fix problem with Default-Stop * Convert to our method of changelog creation [ Stig Thormodsrud ] * Only check for dhcp client on eth, vlan, and bridge. * Fix 3233 dhcp client doesn't work on bridge interface [ An-Cheng Huang ] * support "wildcard" ranking at boot time. only VRRP uses this for now. * partial fix for bug 3216: display escaped edit path correctly. [ Michael Larson ] * fix for show -all. note there is a change in how config files are saved--only set values are now save as opposed to set [ rbalocca ] * Add parted debian package for install-system use [ Michael Larson ] * backing out show cmd change for now on existence of def * final checkin as fix for bug 1219. * mask out def markers in config script * create def file to mark configuration nodes that are created by default, rather than a node with a default value created by a * modified fix for 2525--fixes problem introduced with last fix (bug 3163) * revert fix for 2525 until delete on commit warnings are resolved. * reverse sort order on delete * modified node ordering code. * partial revert of priority support--will reapply after additional changes. * temp removal of free--possible corruption. * support for node priority. higher value in node.def is higher priority. [ Mohit Mehta ] * Fix Bug 3069 Help strings should be standardized [ An-Cheng Huang ] * partial fix for bug 2181: add new template field "priority". [ Michael Larson ] * alternate fix for 2525--force directory evaluation upstream. * Revert "fix for bug 2525" [ Mohit Mehta ] * Fix Bug 3069 Help strings should be standardized [ Michael Larson ] * fix for bug 2525 * fix for bug 2549. * fix for bug 2507 [ An-Cheng Huang ] * fix for bug 2689: sort tag nodes appropriately [ Mohit Mehta ] * Fix Bug 2825 Load should read config file from default location when no argument is provided. [ Stig Thormodsrud ] * Add vlan dependancy for vyatta-cfg. [ rbalocca ] * Fix a changelog problem [ Mark O'Brien ] -- Mark O'Brien Tue, 17 Jun 2008 09:26:38 -0700 vyatta-cfg (0.9) unstable; urgency=low 3.0.5 -- Mark O'Brien Tue, 06 May 2008 12:43:19 -0700 vyatta-cfg (0.8) unstable; urgency=low 3.0.4 [ Mark O'Brien ] [ An-Cheng Huang ] * support "wildcard" ranking at boot time. only VRRP uses this for now. [ Mark O'Brien ] -- Mark O'Brien Mon, 05 May 2008 16:40:38 -0700 vyatta-cfg (0.7) unstable; urgency=low 3.0.3 [ Mark O'Brien ] [ Stephen Hemminger ] * Remove hack to cycle state for static routes * Eliminate vestigates of watchlink [ rbalocca ] * Indicate the VC4.0.2 release candidate in the changelog [ Mark O'Brien ] -- Mark O'Brien Tue, 29 Apr 2008 16:42:21 -0700 vyatta-cfg (0.6) unstable; urgency=low VC4.0.2 [ Mark O'Brien ] [ Robert Bays ] * fix for bug 3177 * cycle interface state on IP address assigment to fix static routes [ Stig Thormodsrud ] * If watchlink isn't running, don't treat it as a fatal error. [ Mark O'Brien ] -- Mark O'Brien Sat, 19 Apr 2008 11:56:07 -0700 vyatta-cfg (0.5) unstable; urgency=low VC4.0.2 release candidate [ Mark O'Brien ] [ Stig Thormodsrud ] * Fix 3034: Loopback interface controlled by "ethernet lo" [ Mark O'Brien ] -- Mark O'Brien Wed, 16 Apr 2008 09:50:08 -0700 vyatta-cfg (0.4) unstable; urgency=low 3.0.2 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 3037: shell completion * add validation for more types * handle <> completion correctly * startup config ordering * fix for bug 3032: * fix for bug 2675: correctly detect newly created config nodes. * add function to delete watchlink exclude entries based on ID. * fix for bug 2689: sort tag nodes appropriately * code cleanup (remove some evil copy-and-paste instances). * fix for bug 3097: correctly detect deleted tag * fix for bug 3090: commit "policy" before "protocols" at boot time. [ Mark O'Brien ] * 3.0.1 [ Stephen Hemminger ] * handle delete address request if address is already removed * stop watchlink when address is removed * handle multiple address deletion when link is down [ Stig Thormodsrud ] * Add utilitly script to add/removed entries to watchlink exclude file. * Add duplicate check to watchlink exclude file. [ rbalocca ] * Fix debian dependencies * Set dependencies on either bash or vyatta-bash [ Mark O'Brien ] -- Mark O'Brien Fri, 04 Apr 2008 18:00:44 -0700 vyatta-cfg (0.3) unstable; urgency=low VC4.0.1 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 2868: return failure for invalid values. * fix for bug 2749: add u32 range check * fix for bug 2912: direct config loading output to syslog. * fix for bug 2924: set admin flag for root * fix for bug 2950: raise config error messages during boot to warning level. * add LESSSECURE * partial fix for bug 2987: use "less" instead of "more", and disable * handle "<*>" allowed values [ Bob Gilligan ] * Bugfix: 2653 * Bugfix: 2885 * Bugfix: 2986 [ Christopher Liljenstolpe ] * Fix 2954: IPv6 addresses that have a-f in the address fail. [ Mohit Mehta ] * CLI tab enhancement at "set interfaces ethernet <> address" * CLI tab enhancement at "set interfaces ethernet <> address" [ Robert Bays ] * fix for bugs 2725 and 2999 * fix for bugs 2725 2999 [ Stephen Hemminger ] * Read qos-policy before setting interface qos-policy * Replace VPL with GPLv2 * Convert from VPL 1.0 to GPLv2 * more robust handling of set mac address * Don't allow operator to run init-floppy [ rbalocca ] * Merge changelog fix to glendale * Vyatta-cfg postinst was preventing upgrade * Add VPL to scripts and fix lintian errors * Fix problems with upgrading (and also fix lintian errors) * Fix problems with upgrading (and also fix lintian errors) * Remove a dependency listed twice * Add GPLv2 to additional Vyatta created scripts [ Mark O'Brien ] -- Mark O'Brien Tue, 18 Mar 2008 19:04:10 -0700 vyatta-cfg (0.2) unstable; urgency=low vc4.0.0 [ Mark O'Brien ] [ An-Cheng Huang ] * rewrite lexical analyzer to support simplified templates. * add "official" support for "comp_help" and "allowed" in config template * allow non-indented line continuation * skip spaces immediately after field names * handle empty action * * don't require backslash line-continuation in expressions. * allow non-txt values in initial state (for default). -- An-Cheng Huang Mon, 25 Feb 2008 17:38:45 -0800 vyatta-cfg (0.1) unstable; urgency=low * Initial Release. -- An-Cheng Huang Mon, 24 Sep 2007 17:31:53 -0700