#!/usr/bin/perl # # Module: vyatta-interfaces.pl # # **** License **** # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # A copy of the GNU General Public License is available as # `/usr/share/common-licenses/GPL' in the Debian GNU/Linux distribution # or on the World Wide Web at `http://www.gnu.org/copyleft/gpl.html'. # You can also obtain it by writing to the Free Software Foundation, # Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, # MA 02110-1301, USA. # # This code was originally developed by Vyatta, Inc. # Portions created by Vyatta are Copyright (C) 2007 Vyatta, Inc. # All Rights Reserved. # # Author: Stig Thormodsrud # Date: November 2007 # Description: Script to assign addresses to interfaces. # # **** End License **** # use lib "/opt/vyatta/share/perl5/"; use Vyatta::Config; use Vyatta::Misc; use Vyatta::Interface; use Getopt::Long; use POSIX; use NetAddr::IP; use Fcntl; use strict; use warnings; my $dhcp_daemon = '/sbin/dhclient'; my ($eth_update, $eth_delete, $addr, $dev, $mac, $mac_update, $op_dhclient); my ($check_name, $show_names, $intf_cli_path, $vif_name, $warn_name); sub usage() { print "Usage: $0 --dev= --check=\n"; print " $0 --dev= --warn\n"; print " $0 --dev= --valid-mac=\n"; print " $0 --dev= --eth-addr-update=\n"; print " $0 --dev= --eth-addr-delete=\n"; print " $0 --dev= --valid-addr={|dhcp}\n"; print " $0 --show=\n"; exit 1; } GetOptions("eth-addr-update=s" => \$eth_update, "eth-addr-delete=s" => \$eth_delete, "valid-addr=s" => \$addr, "dev=s" => \$dev, "valid-mac=s" => \$mac, "set-mac=s" => \$mac_update, "op-command=s" => \$op_dhclient, "check=s" => \$check_name, "show=s" => \$show_names, "vif=s" => \$vif_name, "warn", => \$warn_name, ) or usage(); if ($eth_update) { update_eth_addrs($eth_update, $dev); } if ($eth_delete) { delete_eth_addrs($eth_delete, $dev); } if ($addr) { is_valid_addr($addr, $dev); } if ($mac) { is_valid_mac($mac, $dev); } if ($mac_update) { update_mac($mac_update, $dev); } if ($op_dhclient) { op_dhcp_command($op_dhclient, $dev); } if ($check_name) { is_valid_name($check_name, $dev); } if ($warn_name) { exists_name($dev); } if ($show_names) { show_interfaces($show_names); } sub is_ip_configured { my ($intf, $ip) = @_; my $wc = `ip addr show $intf | grep -c $ip`; if (defined $wc and $wc > 0) { return 1; } else { return 0; } } sub is_ip_duplicate { my ($intf, $ip) = @_; # # get a list of all ipv4 and ipv6 addresses # my @ipaddrs = `ip addr show | grep inet | cut -d" " -f6`; chomp @ipaddrs; my %ipaddrs_hash = map { $_ => 1 } @ipaddrs; if (defined $ipaddrs_hash{$ip}) { # # allow dup if it's the same interface # if (is_ip_configured($intf, $ip)) { return 0; } return 1; } else { return 0; } } sub touch { my $file = shift; my $t = time; sysopen (my $f, $file, O_RDWR|O_CREAT) or die "Can't touch $file: $!"; close $f; utime $t, $t, $file; } sub dhcp_write_file { my ($file, $data) = @_; open(my $fh, '>', $file) || die "Couldn't open $file - $!"; print $fh $data; close $fh; } sub dhcp_conf_header { my $output; my $date = `date`; chomp $date; $output = "#\n# autogenerated by vyatta-interfaces.pl on $date\n#\n"; return $output; } sub get_hostname { my $config = new Vyatta::Config; $config->setLevel("system"); return $config->returnValue("host-name"); } sub is_domain_name_set { my $config = new Vyatta::Config; $config->setLevel("system"); return $config->returnValue("domain-name"); } sub get_mtu { my $name = shift; my $intf = new Vyatta::Interface($name); return $intf->mtu(); } sub dhcp_update_config { my ($conf_file, $intf) = @_; my $output = dhcp_conf_header(); my $hostname = get_hostname(); $output .= "interface \"$intf\" {\n"; if (defined($hostname)) { $output .= "\tsend host-name \"$hostname\";\n"; } $output .= "\trequest subnet-mask, broadcast-address, routers, domain-name-servers"; my $domainname = is_domain_name_set(); if (!defined($domainname)) { $output .= ", domain-name"; } my $mtu = get_mtu($intf); $output .= ", interface-mtu" unless $mtu; $output .= ";\n"; $output .= "}\n\n"; dhcp_write_file($conf_file, $output); } sub is_intf_disabled { my $name = shift; my $intf = new Vyatta::Interface($name); $intf or die "Unknown interface name/type: $name\n"; # only do this if script run from config mode if (!defined $op_dhclient) { my $config = new Vyatta::Config; $config->setLevel($intf->path()); return $config->exists("disable"); } return 0; } sub run_dhclient { my $intf = shift; my ($intf_config_file, $intf_process_id_file, $intf_leases_file) = Vyatta::Misc::generate_dhclient_intf_files($intf); dhcp_update_config($intf_config_file, $intf); if (!(is_intf_disabled($intf))) { my $cmd = "$dhcp_daemon -q -nw -cf $intf_config_file -pf $intf_process_id_file -lf $intf_leases_file $intf 2> /dev/null &"; # adding & at the end to make the process into a daemon immediately system ($cmd) == 0 or warn "start $dhcp_daemon failed: $?\n"; } } sub stop_dhclient { my $intf = shift; if (!(is_intf_disabled($intf))) { my ($intf_config_file, $intf_process_id_file, $intf_leases_file) = Vyatta::Misc::generate_dhclient_intf_files($intf); my $release_cmd = "$dhcp_daemon -q -cf $intf_config_file -pf $intf_process_id_file -lf $intf_leases_file -r $intf 2> /dev/null"; system ($release_cmd) == 0 or warn "stop $dhcp_daemon failed: $?\n"; } } sub update_eth_addrs { my ($addr, $intf) = @_; if ($addr eq "dhcp") { touch("/var/lib/dhcp3/$intf"); run_dhclient($intf); return; } my $version = is_ip_v4_or_v6($addr); if (!defined $version) { exit 1; } if (is_ip_configured($intf, $addr)) { # # treat this as informational, don't fail # print "Address $addr already configured on $intf\n"; exit 0; } if ($version == 4) { return system("ip addr add $addr broadcast + dev $intf"); } if ($version == 6) { return system("ip -6 addr add $addr dev $intf"); } print "Error: Invalid address/prefix [$addr] for interface $intf\n"; exit 1; } sub delete_eth_addrs { my ($addr, $intf) = @_; if ($addr eq "dhcp") { stop_dhclient($intf); unlink("/var/lib/dhcp3/dhclient_$intf\_lease"); unlink("/var/lib/dhcp3/$intf"); unlink("/var/run/vyatta/dhclient/dhclient_release_$intf"); unlink("/var/lib/dhcp3/dhclient_$intf\.conf"); exit 0; } my $version = is_ip_v4_or_v6($addr); if ($version == 6) { exec 'ip', '-6', 'addr', 'del', $addr, 'dev', $intf or die "Could not exec ip?"; } ($version == 4) or die "Bad ip version"; if (is_ip_configured($intf, $addr)) { # Link is up, so just delete address # Zebra is watching for netlink events and will handle it exec 'ip', 'addr', 'del', $addr, 'dev', $intf or die "Could not exec ip?"; } exit 0; } sub update_mac { my ($mac, $intf) = @_; open my $fh, "<", "/sys/class/net/$intf/flags" or die "Error: $intf is not a network device\n"; my $flags = <$fh>; chomp $flags; close $fh or die "Error: can't read state\n"; if (POSIX::strtoul($flags) & 1) { # NB: Perl 5 system return value is bass-ackwards system "sudo ip link set $intf down" and die "Could not set $intf down ($!)\n"; system "sudo ip link set $intf address $mac" and die "Could not set $intf address ($!)\n"; system "sudo ip link set $intf up" and die "Could not set $intf up ($!)\n"; } else { exec "sudo ip link set $intf address $mac"; } exit 0; } sub is_valid_mac { my ($mac, $intf) = @_; my @octets = split /:/, $mac; ($#octets == 5) or die "Error: wrong number of octets: $#octets\n"; (($octets[0] & 1) == 0) or die "Error: $mac is a multicast address\n"; my $sum = 0; $sum += strtoul('0x' . $_) foreach @octets; ( $sum != 0 ) or die "Error: zero is not a valid address\n"; exit 0; } sub is_valid_addr { my ($addr_net, $intf) = @_; if ($addr_net eq "dhcp") { if ($intf eq "lo") { print "Error: can't use dhcp client on loopback interface\n"; exit 1; } if (Vyatta::Misc::is_dhcp_enabled($intf)) { print "Error: dhcp already configured for $intf\n"; exit 1; } if (is_address_enabled($intf)) { print "Error: remove static addresses before enabling dhcp for $intf\n"; exit 1; } exit 0; } my ($addr, $net); if ($addr_net =~ m/^([0-9a-fA-F\.\:]+)\/(\d+)$/) { $addr = $1; $net = $2; } else { exit 1; } my $version = is_ip_v4_or_v6($addr_net); if (!defined $version) { exit 1; } my $ip = NetAddr::IP->new($addr_net); my $network = $ip->network(); my $bcast = $ip->broadcast(); if ($ip->version == 4 and $ip->masklen() == 31) { # # RFC3021 allows for /31 to treat both address as host addresses # } elsif ($ip->masklen() != $ip->bits()) { # # allow /32 for ivp4 and /128 for ipv6 # if ($ip->addr() eq $network->addr()) { print "Can not assign network address as the IP address\n"; exit 1; } if ($ip->addr() eq $bcast->addr()) { print "Can not assign broadcast address as the IP address\n"; exit 1; } } if (Vyatta::Misc::is_dhcp_enabled($intf)) { print "Error: remove dhcp before adding static addresses for $intf\n"; exit 1; } if (is_ip_duplicate($intf, $addr_net)) { print "Error: duplicate address/prefix [$addr_net]\n"; exit 1; } if ($version == 4) { if ($net > 0 && $net <= 32) { exit 0; } } if ($version == 6) { if ($net > 1 && $net <= 128) { exit 0; } } exit 1; } sub op_dhcp_command { my ($op_command, $intf) = @_; if (!Vyatta::Misc::is_dhcp_enabled($intf)) { print "$intf is not using DHCP to get an IP address\n"; exit 1; } my $flags = Vyatta::Misc::get_sysfs_value($intf, 'flags'); my $hex_flags = hex($flags); if (!($hex_flags & 0x1)) { print "$intf is disabled. Unable to release/renew lease\n"; exit 1; } my $tmp_dhclient_dir = '/var/run/vyatta/dhclient/'; my $release_file = $tmp_dhclient_dir . 'dhclient_release_' . $intf; if ($op_command eq "dhcp-release") { if (-e $release_file) { print "IP address for $intf has already been released.\n"; exit 1; } else { print "Releasing DHCP lease on $intf ...\n"; stop_dhclient($intf); mkdir ($tmp_dhclient_dir) if (! -d $tmp_dhclient_dir ); touch ($release_file); exit 0; } } elsif ($op_command eq "dhcp-renew") { print "Renewing DHCP lease on $intf ...\n"; run_dhclient($intf); unlink ($release_file); exit 0; } exit 0; } sub is_valid_name { my ($type, $name) = @_; die "Missing --dev argument\n" unless $name; my $intf = new Vyatta::Interface($name); die "$name does not match any known interface name type\n" unless $intf; die "$name is a ", $intf->type(), " interface not an $type interface\n" if ($type ne 'all' and $intf->type() ne $type); die "$type interface $name does not exist on system\n" unless grep { $name eq $_ } getInterfaces(); exit 0; } sub exists_name { my $name = shift; die "Missing --dev argument\n" unless $name; warn "interface $name does not exist on system\n" unless grep { $name eq $_ } getInterfaces(); exit 0; } # generate one line with all known interfaces (for allowed) sub show_interfaces { my $type = shift; my @interfaces = getInterfaces(); my @match; foreach my $name (@interfaces) { my $intf = new Vyatta::Interface($name); next unless $intf; # skip unknown types next unless ($type eq 'all' || $type eq $intf->type()); if ($vif_name) { next unless $intf->vif(); push @match, $intf->vif() if ($vif_name eq $intf->physicalDevice()); } else { push @match, $name unless $intf->vif() and $type ne 'all'; } } print join(' ', @match), "\n"; } exit 0; # end of file