path: root/debian/changelog

vyatta-cfg (0.16.51) unstable; urgency=low

  * fix for loading config for deactivated nodes. allows nested
    deactivates within a single set of deactivated commands. only
    preserves
  * additional fix for boot loading of deactivate nodes.
  * fix for content-inspection on deactivate.

 -- Michael Larson <slioch@slioch.vyatta.com>  Thu, 27 May 2010 16:50:33 -0700

vyatta-cfg (0.16.50) unstable; urgency=low

  * script that will remove migration comments from configuration file.
    to remove these comments from the comments in the action
    configuration the user should:
  * fix for multiple type support in cli for the following case:

 -- Michael Larson <slioch@slioch.vyatta.com>  Wed, 26 May 2010 13:52:16 -0700

vyatta-cfg (0.16.49) unstable; urgency=low

  * final fix for 5610. fixes loading where node in active config is
    deactivated and is active in loaded configuration.

 -- Michael Larson <slioch@slioch.vyatta.com>  Tue, 25 May 2010 09:53:47 -0700

vyatta-cfg (0.16.48) unstable; urgency=low

  * make validate_ipv6net consistent with others. validateType decides
    whether

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Mon, 24 May 2010 15:43:48 -0700

vyatta-cfg (0.16.47) unstable; urgency=low

  * don't count current node towards limit if it already matches a node
    in the configuration.

 -- Michael Larson <slioch@slioch.vyatta.com>  Fri, 21 May 2010 15:18:54 -0700

vyatta-cfg (0.16.46) unstable; urgency=low

  * Rename sysfs to net_set

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 21 May 2010 15:00:54 -0700

vyatta-cfg (0.16.45) unstable; urgency=low

  * Add command to get/set sysfs files

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 21 May 2010 14:18:59 -0700

vyatta-cfg (0.16.44) unstable; urgency=low

  * fix for disable nodes loading (bug 5610). Additional checks added on
    configuration of disable nodes. requires vyatta-config-migrate
    package as well.

 -- Michael Larson <slioch@slioch.vyatta.com>  Fri, 21 May 2010 10:21:32 -0700

vyatta-cfg (0.16.43) unstable; urgency=low

  * fixed error message on multinode limit exceeded--refer to parent
    node name, not value.
  * fixed seg violation on commit due to extended multiple types support
    in valstruct.

 -- Michael Larson <slioch@slioch.vyatta.com>  Thu, 20 May 2010 15:41:25 -0700

vyatta-cfg (0.16.42) unstable; urgency=low

  * fix for bug 5618. needed to extend valstruct to maintain multiple
    types rather than using first type found in node.val file. also
    simplified type check.

 -- Michael Larson <slioch@slioch.vyatta.com>  Thu, 20 May 2010 13:36:53 -0700

vyatta-cfg (0.16.41) unstable; urgency=low

  * trap for illegal characters in comment field being set by user and
    provide feedback.
  * modified tag limit == 1. Now when set this node will only allow a
    single instance. todo update the parsing structure to support a
    signed value to support embedded tag node

 -- Michael Larson <slioch@slioch.vyatta.com>  Wed, 19 May 2010 14:56:31 -0700

vyatta-cfg (0.16.40) unstable; urgency=low

  [ Arthur Xiong ]
  * 1) skip comment and empty lines in priority file;

  [ Michael Larson ]
  * added additional warning message if the user tries to deactivate a
    node that has already been deactivated.
  * initial checkin of comment feature for cli.

  [ An-Cheng Huang ]
  * POC implementation of unified enumeration mechanism

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 14 May 2010 17:41:16 -0700

vyatta-cfg (0.16.39) unstable; urgency=low

  * additional fix

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 06 May 2010 17:32:40 -0700

vyatta-cfg (0.16.38) unstable; urgency=low

  * fix parsing error in node.def--seen with boolean default values.

 -- Michael Larson <slioch@slioch.vyatta.com>  Thu, 06 May 2010 16:04:45 -0700

vyatta-cfg (0.16.37) unstable; urgency=low

  [ Arthur ]
  * A script to automatically update/add priority tag with some value
    for

  [ Arthur Xiong ]
  * Update regex to handle priority line without space(s) and comment in
    the
  * Update to handle none default path to the templates if provided

  [ Michael Larson ]
  * initial working version of activate and deactivate:
    load,save,show,commit supported.
  * boot loader support now added. various bug fixes and some small
    rework.

 -- Michael Larson <slioch@slioch.vyatta.com>  Wed, 05 May 2010 21:34:38 -0700

vyatta-cfg (0.16.36) unstable; urgency=low

  * support all valid multi-type types

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 23 Apr 2010 16:04:04 -0700

vyatta-cfg (0.16.35) unstable; urgency=low

  [ Michael Larson ]
  * multinode limit and multiple types now supported through config.pm
  * support for PARENT reference in priority statements. Example:

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 22 Apr 2010 18:48:13 -0700

vyatta-cfg (0.16.34) unstable; urgency=low

  * Multiple (i.e. one or two) datatypes can now be supported on a
    node.def type definition.

 -- Michael Larson <slioch@slioch.vyatta.com>  Thu, 15 Apr 2010 13:48:41 -0700

vyatta-cfg (0.16.33) unstable; urgency=low

  * Rename in0 to ifb0

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 15 Apr 2010 13:14:11 -0700

vyatta-cfg (0.16.32) unstable; urgency=low

  * fix for bug 2176.

 -- Michael Larson <slioch@slioch.vyatta.com>  Tue, 13 Apr 2010 13:15:47 -0700

vyatta-cfg (0.16.31) unstable; urgency=low

  * Add support for input interface in Interface module
  * Defer reading ppp config until necessary

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 06 Apr 2010 08:56:31 -0700

vyatta-cfg (0.16.30) unstable; urgency=low

  * Use opendir/grep to get rid of running ls/grep
  * Add support for incoming interface type
  * Remove ifb device skipping

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 05 Apr 2010 16:17:09 -0700

vyatta-cfg (0.16.29) unstable; urgency=low

  * fix for bug 5450.

 -- Michael Larson <slioch@slioch.vyatta.com>  Thu, 01 Apr 2010 14:44:10 -0700

vyatta-cfg (0.16.28) unstable; urgency=low

  * Ignore ifb devices

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 30 Mar 2010 10:47:52 -0700

vyatta-cfg (0.16.27) unstable; urgency=low

  * Allow reading interface description outside config mode

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 29 Mar 2010 16:13:43 -0700

vyatta-cfg (0.16.26) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix perlcritic warnings

  [ Michael Larson ]
  * changed double quotes to single quotes on in commit actions.

 -- Michael Larson <slioch@slioch.vyatta.com>  Mon, 29 Mar 2010 10:41:07 -0700

vyatta-cfg (0.16.25) unstable; urgency=low

  * fix for bug 5300

 -- Michael Larson <slioch@slioch.vyatta.com>  Fri, 26 Mar 2010 16:12:49 -0700

vyatta-cfg (0.16.24) unstable; urgency=low

  [ Stephen Hemminger ]
  * Need explicit return to guarantee returning false

  [ Stig Thormodsrud ]
  * Fix 5203: negation in firewall rule causes deprecation message

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 24 Mar 2010 17:13:24 -0700

vyatta-cfg (0.16.23) unstable; urgency=low

  [ An-Cheng Huang ]
  * use template to determine leaf nodes

  [ Stephen Hemminger ]
  * Fix typo in adsl interface discovery

 -- Stephen Hemminger <shemminger@debian.localdomain>  Wed, 17 Mar 2010 14:11:57 -0700

vyatta-cfg (0.16.22) unstable; urgency=low

  * add hook for boot-time config loading environment

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 15 Mar 2010 14:03:07 -0700

vyatta-cfg (0.16.21) unstable; urgency=low

  * Fix PPP serial QoS support

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 15 Mar 2010 10:54:28 -0700

vyatta-cfg (0.16.20) unstable; urgency=low

  * Print node name before the warning message.

 -- Stig Thormodsrud <stig@vyatta.com>  Fri, 12 Mar 2010 11:11:56 -0800

vyatta-cfg (0.16.19) unstable; urgency=low

  * run migration as vyattacfg group

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 11 Mar 2010 19:03:41 -0800

vyatta-cfg (0.16.18) unstable; urgency=low

  * Bugfix 5021: Make smp_affinity configuration tolerant of failures.

 -- Bob Gilligan <gilligan@vyatta.com>  Tue, 09 Mar 2010 15:53:39 -0800

vyatta-cfg (0.16.17) unstable; urgency=low

  * add function for traversing template hierarchy

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 05 Mar 2010 17:52:38 -0800

vyatta-cfg (0.16.16) unstable; urgency=low

  * add cmd-wrapper move command (for app-mode)

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 05 Mar 2010 11:27:50 -0800

vyatta-cfg (0.16.15) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix completion format for loadkey
  * Hide wireless and tunnel key values

  [ Michael Larson ]
  * reapply term multinode sorting. fix for bug 5376

 -- Michael Larson <slioch@slioch.vyatta.com>  Wed, 24 Feb 2010 18:11:47 -0800

vyatta-cfg (0.16.14) unstable; urgency=low

  * add fucntion to return bridge-group that an interface might be
    assigned to

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Thu, 18 Feb 2010 17:28:20 -0800

vyatta-cfg (0.16.13) unstable; urgency=low

  * UNRELEASED

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 17 Feb 2010 16:13:47 -0800

vyatta-cfg (0.16.12) unstable; urgency=low

  * Add filename completion for keyfile

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 17 Feb 2010 12:46:26 -0800

vyatta-cfg (0.16.11) unstable; urgency=low

  * Add completion for loadkey

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 16 Feb 2010 14:37:10 -0800

vyatta-cfg (0.16.10) unstable; urgency=low

  [ An-Cheng Huang ]
  * improve default value parsing

  [ Michael Larson ]
  * fixed problem with sibling environment variable flag. Also added

 -- Michael Larson <slioch@slioch.vyatta.com>  Mon, 15 Feb 2010 09:42:14 -0800

vyatta-cfg (0.16.9) unstable; urgency=low

  * Fix handling of pppoe devices

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 10 Feb 2010 16:45:21 -0800

vyatta-cfg (0.16.8) unstable; urgency=low

  * Fix missing bracket

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 10 Feb 2010 08:16:30 -0800

vyatta-cfg (0.16.7) unstable; urgency=low

  [ An-Cheng Huang ]
  * add util function

  [ Stephen Hemminger ]
  * Add preliminary support for pppoe devices

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 09 Feb 2010 21:01:08 -0800

vyatta-cfg (0.16.6) unstable; urgency=low

  * Be unsafe, don't harden
  * Force vyatta-cfg/vyatta-cfg-system synchronization

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 05 Feb 2010 12:31:56 -0800

vyatta-cfg (0.16.5) unstable; urgency=low

  * Remove dead function
  * Allow fine grain disabling of vyatta during boot

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 03 Feb 2010 17:33:31 -0800

vyatta-cfg (0.16.4) unstable; urgency=low

  * Turn on debian hardening
  * Allow disabling vyatta config on kernel boot
  * Rename vyatta-ofr to vyatta-router
  * Move modprobe.d/no-copybreak to vyatta-cfg-system package

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 03 Feb 2010 14:04:35 -0800

vyatta-cfg (0.16.3) unstable; urgency=low

  * Restore priority comments

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 19 Jan 2010 14:16:31 -0800

vyatta-cfg (0.16.2) unstable; urgency=low

  * Rewrite priority script to use File::find
  * Revert "Workaround issues with floppy formatting on some VM and
    hardware"

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 22 Dec 2009 09:52:30 -0800

vyatta-cfg (0.16.1) unstable; urgency=low

  * UNRELEASED

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 21 Dec 2009 13:15:18 -0800

vyatta-cfg (0.16) unstable; urgency=low

  * add derived file
  * Remove no longer used priority file
  * Move tests to vyatta-cfg-system
  * Move interfaces to vyatta-cfg-system package
  * Don't copy templates from here
  * Move no copy break modprobe file to handle Debian Lintian warning
  * Fix lintian warning about vyatta-ofr not providing itself
  * Workaround issues with floppy formatting on some VM and hardware
  * Modprobe files are not executable scripts
  * Remove install step refering to old priority file

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 21 Dec 2009 12:57:23 -0800

vyatta-cfg (0.15.49) unstable; urgency=low

  * Setup vyatta groups in early stage of install

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Sun, 20 Dec 2009 18:20:19 -0800

vyatta-cfg (0.15.48) unstable; urgency=low

  * Fix DHCP command handling

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 16 Dec 2009 12:10:00 -0800

vyatta-cfg (0.15.47) unstable; urgency=low

  * Bugfix 5143: Fix grep regex for NICs with >= 10 queues.

 -- Bob Gilligan <gilligan@vyatta.com>  Tue, 08 Dec 2009 12:30:31 -0800

vyatta-cfg (0.15.46) unstable; urgency=low

  * Fix problem from earlier FILE handle removal in Config.pm

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 04 Dec 2009 19:50:34 -0800

vyatta-cfg (0.15.45) unstable; urgency=low

  * Fix perlcritic warnings in Keepalived
  * Fix perlcritic warnings in Config.pm
  * Add alias wrapper for vyatta-load-user-key

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 04 Dec 2009 19:33:59 -0800

vyatta-cfg (0.15.44) unstable; urgency=low

  * remove .changes file after work was done by commit
  * fix for bug 4999

 -- Michael Larson <slioch@slioch.vyatta.com>  Tue, 01 Dec 2009 17:05:54 -0800

vyatta-cfg (0.15.43) unstable; urgency=low

  * Fix 5133: vrrp transition scripts not working properly when going to
    backup

 -- Stig Thormodsrud <stig@vyatta.com>  Tue, 01 Dec 2009 14:58:45 -0800

vyatta-cfg (0.15.42) unstable; urgency=low

  [ Stephen Hemminger ]
  * Change options to floppy mount

  [ Stig Thormodsrud ]
  * Fix breakage from pervious commit.

 -- Stig Thormodsrud <stig@vyatta.com>  Sat, 14 Nov 2009 14:27:27 -0800

vyatta-cfg (0.15.41) unstable; urgency=low

  * preserve node.val order for term multinodes. fix for bug 5103

 -- Michael Larson <mike@ft1.vyatta.com>  Tue, 10 Nov 2009 12:06:38 -0800

vyatta-cfg (0.15.40) unstable; urgency=low

  * Allow inline comments in config template fields.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 05 Nov 2009 16:41:12 -0800

vyatta-cfg (0.15.39) unstable; urgency=low

  * Fix missing semicolon.

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 04 Nov 2009 08:16:11 -0800

vyatta-cfg (0.15.38) unstable; urgency=low

  * Fix uninitialized variable when reading carrier on admin down
    interface.

 -- Stig Thormodsrud <stig@vyatta.com>  Tue, 03 Nov 2009 11:22:03 -0800

vyatta-cfg (0.15.37) unstable; urgency=low

  [ slioch ]
  * fix for missing priority value on embedded multinode. bug behavior
    was more limited than this--at least tag node.def and multiple

 -- root <root@eng-140.vyatta.com>  Mon, 02 Nov 2009 17:26:42 -0800

vyatta-cfg (0.15.36) unstable; urgency=low

  [ David S. Madole ]
  * Add VRRP capability to bonding interfaces and vifs of bonding
    interfaces.

  [ Stig Thormodsrud ]
  * Add method to retrieve carrier value.
  * Convert keepalived to use Interface infrastructure.
  * Fix carrier method.
  * Add natural order sort.
  * Fix spelling error in carrier method.

 -- Stig Thormodsrud <stig@vyatta.com>  Sun, 01 Nov 2009 14:58:58 -0800

vyatta-cfg (0.15.35) unstable; urgency=low

  * Sync config file after saving

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 30 Oct 2009 11:05:03 -0700

vyatta-cfg (0.15.34) unstable; urgency=low

  * Add copybreak option to all ether drivers
  * Avoid updating config.boot unless necessary
  * Change how floppy is mounted

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 29 Oct 2009 11:18:09 -0700

vyatta-cfg (0.15.33) unstable; urgency=low

  [ slioch ]
  * removed out of date priority values from priority file

 -- root <root@eng-140.vyatta.com>  Tue, 27 Oct 2009 17:13:25 -0700

vyatta-cfg (0.15.32) unstable; urgency=low

  [ slioch ]
  * dismantle old priority file parsing and node matching code. removed

  [ Bob Gilligan ]
  * Generalize handling of multi-queue NICs.

 -- Bob Gilligan <gilligan@vyatta.com>  Mon, 26 Oct 2009 17:09:30 -0700

vyatta-cfg (0.15.31) unstable; urgency=low

  [ slioch ]
  * sorts and generates priority statements from priority node.def
    entries
  * fixed script to handle multiple entries for same priority
  * pull priority from file into data structure

  [ Stephen Hemminger ]
  * Fix description setting on vif

  [ slioch ]
  * preserve priorities in hierarchy. old priority still active, but
    commit -s will now display both priorities:
  * priorities should match up on all nodes now, except where the
    priority file diverges from the node.defs
  * activate priority values from node.def. priority file is now no
    longer used and should be considered depricated.

 -- slioch <slioch@eng-140.vyatta.com>  Thu, 22 Oct 2009 15:37:21 -0700

vyatta-cfg (0.15.30) unstable; urgency=low

  * move priority after tag nodes.

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 21 Oct 2009 09:14:04 -0700

vyatta-cfg (0.15.29) unstable; urgency=low

  * pushed priorities to node.def's

 -- slioch <slioch@eng-140.vyatta.com>  Tue, 20 Oct 2009 16:12:40 -0700

vyatta-cfg (0.15.28) unstable; urgency=low

  * new commit mode for debugging.
  * add sudo back to save command, and add check to save script that
    validates vyatta config token at end of file. this will prevent the

 -- slioch <slioch@eng-140.vyatta.com>  Mon, 19 Oct 2009 15:45:34 -0700

vyatta-cfg (0.15.27) unstable; urgency=low

  [ slioch ]
  * modify group ownership on save command

 -- root <root@eng-140.vyatta.com>  Thu, 15 Oct 2009 11:57:14 -0700

vyatta-cfg (0.15.26) unstable; urgency=low

  [ slioch ]
  * followup checkin for fast commit on success behavior. Addresses
    problem with deleted leafs. Partial regression run on changes,
    results map to 10/10 build.

 -- root <root@eng-140.vyatta.com>  Mon, 12 Oct 2009 17:02:45 -0700

vyatta-cfg (0.15.25) unstable; urgency=low

  * Bugfix 2593: Introduce automatic static IRQ affinity balancing for
    some NICs.

 -- Bob Gilligan <gilligan@vyatta.com>  Mon, 12 Oct 2009 16:45:33 -0700

vyatta-cfg (0.15.24) unstable; urgency=low

  * escape value slash in leaf value--followon fix to suppression of
    leaf value with slash in
  * performance optimization on commit. On successful commits (i.e. no
    failures) will improve performance by avoiding the piecewise
    priority based copy and just

 -- slioch <slioch@eng-140.vyatta.com>  Sat, 10 Oct 2009 23:28:36 -0700

vyatta-cfg (0.15.23) unstable; urgency=low

  [ Michael Larson ]
  * remove old source commit head. likely no longer works well given
    corresponding changes made to node.defs
  *  escape value slash in leaf value--followon fix to suppression of
    leaf value with slash in

  [ An-Cheng Huang ]
  * make snmp come up last
  * update .gitignore
  * commit post-processing performance optimization

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 09 Oct 2009 19:51:31 -0700

vyatta-cfg (0.15.22) unstable; urgency=low

  * UNRELEASED

 -- root <root@ft1.vyatta.com>  Mon, 05 Oct 2009 09:55:56 -0700

vyatta-cfg (0.15.21) unstable; urgency=low

  [ Michael Larson ]
  *     fix for bug 4969. on leaf nodes scan for '/' and don't make
    these values available to the partial commit status api (bug fix
    4919). this approach will

  [ Stephen Hemminger ]
  * Fix warning from missing return
  * add missing prototypes
  * Update function prototypes

  [ Bob Gilligan ]
  * Add priority nodes to start router advertisement daemon.

 -- Bob Gilligan <gilligan@vyatta.com>  Fri, 02 Oct 2009 18:03:03 -0700

vyatta-cfg (0.15.20) unstable; urgency=low

  [ Michael Larson ]
  * term multinodes perl api support to provide currently committed
    values.

  [ Mohit Mehta ]
  * Fix Bug 4919 "service dns" branch of configuration file missing ...

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 11 Sep 2009 18:11:11 -0700

vyatta-cfg (0.15.19) unstable; urgency=low

  [ Michael Larson ]
  * leaf node support for new commit. Returns reconciled processed node
    returnOrigPlusComValue()
  * add support for value tags on term multinodes. used in debugging
    output and accounting file.

  [ Stephen Hemminger ]

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 11 Sep 2009 15:43:00 -0700

vyatta-cfg (0.15.18) unstable; urgency=low

  [ Michael Larson ]
  *     add leaf values to path data structures. will show in disgnostic
    output from commit and via .changes

  [ Stephen Hemminger ]
  * Add group vyatta-op

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 11 Sep 2009 08:59:24 -0700

vyatta-cfg (0.15.17) unstable; urgency=low

  [ Michael Larson ]
  * fix for ptr magic on 64 bit system. looks like double ptr was
    getting the missing the last 4 bytes on 64 bit copy.
  *        Priority file generator. This program will iterate over the
    complete template tree and build the

  [ Bob Gilligan ]
  * Bugfix 4700, 4269: Fix set and commit-time checks of ethernet
    address values
  * Bugfix 4700, 4269: Fix set and commit-time checks for ethernet vif
    addresses too

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 09 Sep 2009 17:39:26 -0700

vyatta-cfg (0.15.16) unstable; urgency=low

  * Allow empty description

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 09 Sep 2009 14:39:25 -0700

vyatta-cfg (0.15.15) unstable; urgency=low

  * added data path to environment during commit. value key is
    "NODE_DATA_PATH". nodes are delimited by "/" rather than spaces.
  * fix for bug 4697. Added range value check that start must be less
    than or equal to stop address

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 09 Sep 2009 09:29:14 -0700

vyatta-cfg (0.15.14) unstable; urgency=low

  * Bugfix 4793: Narrow the set of platforms on which module is loaded.

 -- Bob Gilligan <gilligan@vyatta.com>  Fri, 28 Aug 2009 17:51:04 -0700

vyatta-cfg (0.15.13) unstable; urgency=low

  * Bugfix 4793: Load the acpi_cpufreq module on certain processors.

 -- Bob Gilligan <gilligan@vyatta.com>  Fri, 28 Aug 2009 15:43:00 -0700

vyatta-cfg (0.15.12) unstable; urgency=low

  * add no copybreak for more drivers
  * Failure to set address should fail the commit

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 27 Aug 2009 10:07:06 -0700

vyatta-cfg (0.15.11) unstable; urgency=low

  * Skip more wireless interfaces
  * Add a small script to test for node existance

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 24 Aug 2009 12:16:12 -0700

vyatta-cfg (0.15.10) unstable; urgency=low

  * Add priority for wireless
  * Skip wmaster interface in operational commands
  * Add ability to disable flow-control

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 20 Aug 2009 11:51:01 -0700

vyatta-cfg (0.15.9) unstable; urgency=low

  * check if port name is valid for both tcp and udp when protocol
    tcp_udp

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 07 Aug 2009 18:56:01 -0700

vyatta-cfg (0.15.8) unstable; urgency=low

  [ slioch ]
  * cleaned out more of the islavista rank code. closing bug 4473 as a
    result

  [ Stig Thormodsrud ]
  * Revert "Fix [Bug 4760] New: members were removed after an in-use
    firewall group"
  * Another attempt to fix 4760.

  [ Stephen Hemminger ]

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 06 Aug 2009 12:18:18 -0700

vyatta-cfg (0.15.7) unstable; urgency=low

  [ Stephen Hemminger ]
  * Add hw_address method for use in bonding

  [ Stig Thormodsrud ]
  * Fix [Bug 4760] New: members were removed after an in-use firewall
    group

 -- Stig Thormodsrud <stig@vyatta.com>  Thu, 30 Jul 2009 11:43:34 -0700

vyatta-cfg (0.15.6) unstable; urgency=low

  * update cli-expand-var script to match current variable reference
    syntax.

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 29 Jul 2009 12:02:31 -0700

vyatta-cfg (0.15.5) unstable; urgency=low

  * alter rename rule option to work for firewall and nat rules

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 28 Jul 2009 17:08:03 -0700

vyatta-cfg (0.15.4) unstable; urgency=low

  [ slioch ]
  * fix for bug 4255. commit check was not being called on active node
    that had deleted children. This change only affects

  [ Stig Thormodsrud ]
  * Fix 4722: Output inconsistent from 'save' and 'load' commands

  [ Mohit Mehta ]

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 24 Jul 2009 14:27:06 -0700

vyatta-cfg (0.15.3) unstable; urgency=low

  * Bugfix 4717: Remove duplicate entries in priority file.

 -- Bob Gilligan <gilligan@vyatta.com>  Mon, 13 Jul 2009 16:42:48 -0700

vyatta-cfg (0.15.2) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Add more system priorities so that 1 system failure doesn't affect

  [ Stephen Hemminger ]
  * Fix duplicate bonding vif entry

  [ Stig Thormodsrud ]
  * Fix 4623: Removing IPSEC VPN config without removing cluster ipsec
    config drops all interfaces.

 -- Stig Thormodsrud <stig@vyatta.com>  Fri, 10 Jul 2009 14:11:49 -0700

vyatta-cfg (0.15.1) unstable; urgency=low

  * load requires additional environment variables

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 08 Jul 2009 18:29:31 -0700

vyatta-cfg (0.14.104) unstable; urgency=low

  [ Mark O'Brien ]
  * Updated bridging/bonding priorites.

  [ slioch ]
  * added isActive function in perl code to allow a comparison of active
  * fixed isActive() api to now support mixed level and passed in
    relative path values.

  [ Stephen Hemminger ]
  * Start bonding vif after bond-group is created
  * Use ip command rather than sysfs to set ifalias

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 08 Jul 2009 16:55:51 -0700

vyatta-cfg (0.14.103) unstable; urgency=low

  * fix for ptr magic on 64 bit system. looks like double ptr was
    getting the missing the last 4 bytes on 64 bit copy.

 -- slioch <slioch@eng-140.vyatta.com>  Mon, 06 Jul 2009 17:51:15 -0700

vyatta-cfg (0.14.102) unstable; urgency=low

  * updated perl api for new cli to support working node representation.
    not yet functional without additional testing.
  * bugsfixed in active+working node merge for perl api.
  * fix for bug 4669. Revert string back to value for terminating
    multinodes.

 -- slioch <slioch@eng-140.vyatta.com>  Mon, 06 Jul 2009 14:09:20 -0700

vyatta-cfg (0.14.101) unstable; urgency=low

  * add function to check if a firewall ruleset isActive

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Thu, 02 Jul 2009 12:23:19 -0700

vyatta-cfg (0.14.100) unstable; urgency=low

  * Fix 4664: 'set failed' is returned when duplicated interface IP
    address is set

 -- Stig Thormodsrud <stig@vyatta.com>  Tue, 30 Jun 2009 12:08:55 -0700

vyatta-cfg (0.14.99) unstable; urgency=low

  * add option for renaming firewall rules to cmd-wrapper script

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 30 Jun 2009 11:39:01 -0700

vyatta-cfg (0.14.98) unstable; urgency=low

  [ slioch ]
  * fix -a option for displaying actions when commit or syntax check is
    present in the node.def. This change only affects display of nodes
    when -a option is used.
  * Commit check now behaves like IslaVista.
  * The SYNTAX and COMMIT tags will be executed before an actions
    (UPDATE,

  [ Mohit Mehta ]
  * make changes to work with dhcp 4.1.0

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Mon, 29 Jun 2009 10:05:13 -0700

vyatta-cfg (0.14.97) unstable; urgency=low

  * add validation for bash special characters

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 12 Jun 2009 19:01:29 -0700

vyatta-cfg (0.14.96) unstable; urgency=low

  [ slioch ]
  * fix for bug 4444.
  * fix for bug 4505 merge is now called merge.
  * additional fix for bug 4212. root dirs needed to be reversed on del
    event. passes regression

  [ An-Cheng Huang ]
  * add "restrictive_filename" to TypeChecker

  [ Stephen Hemminger ]
  * Fix update on multi-node
  * Handle speed/duplex settings better
  * Allow delete of ethernet settings when device does not exist
  * Make sure interface name regex are anchored
  * Manage speed duplex in vyatta-interfaces.pl
  * Make sure interface name regex are anchored

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 12 Jun 2009 17:09:25 -0700

vyatta-cfg (0.14.95) unstable; urgency=low

  * Bugfix 4235: Improve help text.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 04 Jun 2009 10:43:41 -0700

vyatta-cfg (0.14.94) unstable; urgency=low

  [ slioch ]
  * added support for first and last sibling environment variable:
    "ENV_SIBLING_POSITION". This value will either be "FIRST" or "LAST"
    or undefined.

  [ Mohit Mehta ]
  * change default-policy to default-action for zones

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Wed, 03 Jun 2009 16:42:28 -0700

vyatta-cfg (0.14.93) unstable; urgency=low

  * Reset to higher version

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 01 Jun 2009 17:40:31 -0700

vyatta-cfg (0.14.91) unstable; urgency=low

  * Bugfix 4235: Code cleanup.

 -- Bob Gilligan <gilligan@vyatta.com>  Fri, 29 May 2009 17:34:27 -0700

vyatta-cfg (0.14.90) unstable; urgency=low

  [ Stephen Hemminger ]
  * Remove priorities from unnecessary bgp steps
  * Fix BGP priority

  [ Bob Gilligan ]
  * Bugfix 4235: Add help for "copy" and "rename" commands.

 -- Bob Gilligan <gilligan@vyatta.com>  Fri, 29 May 2009 15:42:28 -0700

vyatta-cfg (0.14.89) unstable; urgency=low

  * Bugfix 4235: Add help text for "load" and "save" commands in config
    mode.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 28 May 2009 14:53:32 -0700

vyatta-cfg (0.14.88) unstable; urgency=low

  * fix for bug 4212 and bug 4434.

 -- slioch <slioch@eng-140.vyatta.com>  Thu, 28 May 2009 13:26:05 -0700

vyatta-cfg (0.14.87) unstable; urgency=low

  * Fix ordering of ospf

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 27 May 2009 16:01:23 -0700

vyatta-cfg (0.14.86) unstable; urgency=low

  * Bugfix 4428: Disable copybreak in selected drivers to improve
    performance.

 -- Bob Gilligan <gilligan@vyatta.com>  Tue, 26 May 2009 20:42:25 +0000

vyatta-cfg (0.14.85) unstable; urgency=low

  * Update priority file
  * Simplify ospf/rip priority

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 22 May 2009 10:49:47 -0700

vyatta-cfg (0.14.84) unstable; urgency=low

  [ An-Cheng Huang ]
  * add "discard" command to cmd wrapper

  [ slioch ]
  * added load-merge command to configuration mode

  [ Bob Gilligan ]
  * Bugfix 4432: Don't validate interface name in "check" sub-command.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 21 May 2009 17:28:48 -0700

vyatta-cfg (0.14.83) unstable; urgency=low

  * Add wireless device to table
  * Allow creating vlan on disabled device
  * Add script option to check if interface is up
  * Only bring up VIF if real device is up

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 21 May 2009 10:40:00 -0700

vyatta-cfg (0.14.82) unstable; urgency=low

  * Use the default_smp_affinity /proc file if it is available.

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 20 May 2009 16:41:25 -0700

vyatta-cfg (0.14.81) unstable; urgency=low

  [ slioch ]
  * merge option added to load script. "load [configfile] --merge" adds
    configuration to current
  * root node support on load merge operation. additional work needed
    for deeper merge path support
  * now explicit root merge works up to first multinode with explicit
    path
  * notes on arbitrary root node loading in merge operations.

  [ Bob Gilligan ]
  * Bugfix 4427: Handle multiqueue NICs.

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 20 May 2009 16:21:53 -0700

vyatta-cfg (0.14.80) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix warnings from using undefined variable

  [ Mohit Mehta ]
  * * don't allow user to change zone-type on the fly

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Wed, 06 May 2009 16:52:23 -0700

vyatta-cfg (0.14.79) unstable; urgency=low

  * * add flag to print commands to STDOUT for debugging

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Tue, 05 May 2009 11:49:38 -0700

vyatta-cfg (0.14.78) unstable; urgency=low

  * fix for bug 4338. update was being called on active nodes that
    contained

 -- slioch <slioch@eng-140.vyatta.com>  Fri, 01 May 2009 22:57:05 -0700

vyatta-cfg (0.14.77) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix spelling errors in priority file comments

  [ An-Cheng Huang ]
  * add "load" support in vyatta-cfg-cmd-wrapper

 -- An-Cheng Huang <ancheng@vyatta.com>  Fri, 01 May 2009 11:05:56 -0700

vyatta-cfg (0.14.76) unstable; urgency=low

  * testing if this fixes diable-link-detect file move problem

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Wed, 29 Apr 2009 14:48:20 -0700

vyatta-cfg (0.14.75) unstable; urgency=low

  * Rename virtual-ethernet to pseudo-ethernet

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 29 Apr 2009 12:32:54 -0700

vyatta-cfg (0.14.74) unstable; urgency=low

  * Extend getIP() to be able to get all addresses
  * Fix bug in is_ip_configured
  * Catch incorrect address format
  * Use getIP() to check for duplicates

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 28 Apr 2009 23:01:55 -0700

vyatta-cfg (0.14.73) unstable; urgency=low

  * Need to convert path to have slashes
  * DHCP should be checking config not flags

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 28 Apr 2009 11:24:42 -0700

vyatta-cfg (0.14.72) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix path to virtual-ethernet

  [ Mohit Mehta ]
  * outlaw adding an interface to a zone that has firewall configured
    for it

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Mon, 27 Apr 2009 17:20:22 -0700

vyatta-cfg (0.14.71) unstable; urgency=low

  * reindent code
  * Cleanup exports of Vyatta::Misc

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 27 Apr 2009 14:30:37 -0700

vyatta-cfg (0.14.70) unstable; urgency=low

  * fix broken call to getIP

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Mon, 27 Apr 2009 14:24:11 -0700

vyatta-cfg (0.14.69) unstable; urgency=low

  * Use getIP rather than call 'ip addr'
  * Use undef for false
  * Add method to show configured mtu
  * Handle errors better in show_mtu
  * vyatta-interfaces changes for DHCP

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 27 Apr 2009 10:19:03 -0700

vyatta-cfg (0.14.68) unstable; urgency=low

  [ Stephen Hemminger ]
  * Add support for virtual-ethernets

  [ Stig Thormodsrud ]
  * Add more firewall priorities.

 -- Stig Thormodsrud <stig@vyatta.com>  Sun, 26 Apr 2009 19:02:45 -0700

vyatta-cfg (0.14.67) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix vyatta-interfaces

  [ Stig Thormodsrud ]
  * Add some debug files to help diagnose boot issue with new cli
    ordering.

 -- Stig Thormodsrud <stig@vyatta.com>  Tue, 21 Apr 2009 17:30:22 -0700

vyatta-cfg (0.14.66) unstable; urgency=low

  * Move disable-link-detect from vytta-cfg-quagga to here

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 20 Apr 2009 09:22:35 -0700

vyatta-cfg (0.14.65) unstable; urgency=low

  * add env override for default session id

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 20 Apr 2009 01:43:22 -0700

vyatta-cfg (0.14.64) unstable; urgency=low

  * add function to get zone default-policy

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Thu, 16 Apr 2009 17:43:38 -0700

vyatta-cfg (0.14.63) unstable; urgency=low

  * Add separate priority for 4 firewall trees, since the "end"
    processing

 -- Stig Thormodsrud <stig@vyatta.com>  Mon, 13 Apr 2009 14:25:13 -0700

vyatta-cfg (0.14.62) unstable; urgency=low

  * wild cards are now supported on terminating nodes in the priority
    file:

 -- slioch <slioch@eng-140.vyatta.com>  Sun, 12 Apr 2009 09:52:06 -0700

vyatta-cfg (0.14.61) unstable; urgency=low

  * add zone module

 -- Mohit Mehta <mohit.mehta@vyatta.com>  Fri, 10 Apr 2009 18:40:08 -0700

vyatta-cfg (0.14.60) unstable; urgency=low

  [ Mohit Mehta ]
  * maintain increasing order of priority file

  [ slioch ]
  * remove rank loading from loadconfig. rank load is disabled--will
    remove ordering code (that has no effect) in a future submission.

  [ An-Cheng Huang ]
  * add "save" command to cfg-cmd-wrapper

  [ slioch ]
  * for fans of the new priority|commit system, debug output is now
    enabled on config boot. -a action is activated and last output is
    written to
  * Handle commit failure processing within priority group correctly.
    Processing now stops on failure within priority group (expected
    behavior).

  [ Mohit Mehta ]
  * add priorities and ranks for zone based firewall

  [ slioch ]
  * added syslog entries for debug statements.

  [ Bob Gilligan ]
  * Bugfix 4272: Set log level to "notice" so messages are logged by
    default.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 09 Apr 2009 11:40:28 -0700

vyatta-cfg (0.14.59) unstable; urgency=low

  * Fix cut/paste syntax of priority which is different than rank.

 -- Stig Thormodsrud <stig@vyatta.com>  Fri, 03 Apr 2009 17:21:32 -0700

vyatta-cfg (0.14.58) unstable; urgency=low

  * UNRELEASED

 -- Stig Thormodsrud <stig@vyatta.com>  Fri, 03 Apr 2009 13:15:32 -0700

vyatta-cfg (0.14.57) unstable; urgency=low

  * orphaned parent support

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 01 Apr 2009 23:55:09 -0700

vyatta-cfg (0.14.56) unstable; urgency=low

  * Add more service priorities so one service can fail without
    affecting

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 01 Apr 2009 16:26:43 -0700

vyatta-cfg (0.14.55) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Change rank value such that tunnels get created before "protocols
    rip interface".

  [ Stephen Hemminger ]
  * Add --warn option for vyatta-interfaces

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 01 Apr 2009 12:25:44 -0700

vyatta-cfg (0.14.54) unstable; urgency=low

  [ slioch ]
  * added noop state to commit_action env variable to make scripts
    happy.
  * change noop to active for env variable--this is more consistent with
    the action being applied.

  [ An-Cheng Huang ]
  * make bridge address a different rank to match new priority scheme.

 -- An-Cheng Huang <ancheng@vyatta.com>  Tue, 31 Mar 2009 14:57:12 -0700

vyatta-cfg (0.14.53) unstable; urgency=low

  [ slioch ]
  * only set env varible for commit action on directly deleted set nodes
    and do not promote to enclosing transaction scope.

  [ Stig Thormodsrud ]
  * Remove duplicate priorities for ethernet/vif.

 -- Stig Thormodsrud <stig@vyatta.com>  Mon, 30 Mar 2009 14:21:08 -0700

vyatta-cfg (0.14.52) unstable; urgency=low

  [ slioch ]
  * propagate commit failure error to commit return status.

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 30 Mar 2009 11:24:36 -0700

vyatta-cfg (0.14.51) unstable; urgency=low

  * Add all the new ip/ipv6 ospf/rip parameters

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Sat, 28 Mar 2009 17:45:13 -0700

vyatta-cfg (0.14.50) unstable; urgency=low

  [ Bob Gilligan ]
  * Update comments in priority file.

  [ Stig Thormodsrud ]
  * Add priorities to create vif before trying to add bridge-group to
    vif.

 -- Stig Thormodsrud <stig@vyatta.com>  Wed, 25 Mar 2009 17:40:56 -0700

vyatta-cfg (0.14.49) unstable; urgency=low

  * Move Keepalived.pm from vyatta-cfg-system

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 25 Mar 2009 16:44:37 -0700

vyatta-cfg (0.14.48) unstable; urgency=low

  [ slioch ]
  * skip comment fields in priority file. a comment field is defined by
    the first non-space character on a line--if this character is a hash
    it is a comment otherwise it's an

  [ Stephen Hemminger ]
  * add ipv6 interface priority
  * Fix update of interface description

  [ Bob Gilligan ]
  * Added explanatory comments to the priority file.

  [ slioch ]
  * bug in logic when implementing additional show command--was causing
    commit failures to be lost on repeated commits.

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 25 Mar 2009 15:51:37 -0700

vyatta-cfg (0.14.47) unstable; urgency=low

  * Cleanup description string
  * Move interface metric configuration until after protocols

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 23 Mar 2009 16:23:45 -0700

vyatta-cfg (0.14.46) unstable; urgency=low

  [ Stephen Hemminger ]
  * Store description in ifalias
  * Remove #! /usr/bin/perl

  [ slioch ]
  * added command to view set of actions and nodes applied to system in
    order. The new command flag is "-a"

  [ Stephen Hemminger ]

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 23 Mar 2009 12:26:45 -0700

vyatta-cfg (0.14.45) unstable; urgency=low

  * Tweak priority to get cluster before vpn.

 -- Stig Thormodsrud <stig@vyatta.com>  Mon, 16 Mar 2009 20:54:53 -0700

vyatta-cfg (0.14.44) unstable; urgency=low

  * isClusterIP() needs to strip off the /mask/interface/bcast.

 -- Stig Thormodsrud <stig@vyatta.com>  Mon, 16 Mar 2009 18:10:25 -0700

vyatta-cfg (0.14.43) unstable; urgency=low

  [ Stephen Hemminger ]
  * Use create rather than update on multi-node (loopback)

  [ Stig Thormodsrud ]
  * Tweak some priorities to get vlans created before vrrp.

 -- Stig Thormodsrud <stig@vyatta.com>  Thu, 12 Mar 2009 17:32:45 -0700

vyatta-cfg (0.14.42) unstable; urgency=low

  * Disable creating vlan on disabled interface
  * fix email in changelog
  * Block disabling interface with VIF
  * Fix warnings from redefining TRUE
  * Fix compiler warnings in commit2
  * Fix compiler warnings in unionfs
  * Fix vif delete
  * Fix argument to show-interfaces to find vif

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 11 Mar 2009 21:35:45 -0700

vyatta-cfg (0.14.41) unstable; urgency=low

  [ slioch ]
  * added action and location of error to syslog on commit. error
    message string will need to be added later after some reworking of
    the old node

  [ Stephen Hemminger ]
  * Block shutdown in configure mode

  [ slioch ]
  * buggy file exist test--thanx stig for test case to repro. fixes
    vpn_smoke regression failure.

 -- slioch <slioch@eng-140.vyatta.com>  Tue, 10 Mar 2009 21:31:05 -0700

vyatta-cfg (0.14.40) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Change tag node to use 'create' instead of 'update' since the cli
    orders them differently.

  [ slioch ]
  * fix for qos-walkthrough. manage def file during commit--should
    handle general case, just happened to show up on qos-walkthrough
    (after def files were supported in the new

 -- slioch <slioch@eng-140.vyatta.com>  Mon, 09 Mar 2009 12:20:22 -0700

vyatta-cfg (0.14.39) unstable; urgency=low

  * Fix show_interfaces() so that it includes vlans for $type='all'.
  * Fix is_valid_name() to support any valid interface type (--check
    all).

 -- Stig Thormodsrud <stig@io.vyatta.com>  Thu, 05 Mar 2009 15:07:07 -0800

vyatta-cfg (0.14.38) unstable; urgency=low

  * limit unescape command to embedded multinodes--fixes problem in qos-
    walkthrough regression test. haven't tried it but system probably
    inherently prevents percents from

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 04 Mar 2009 17:17:24 -0800

vyatta-cfg (0.14.37) unstable; urgency=low

  * modified environment variable setting for action on nodes.

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 04 Mar 2009 09:46:20 -0800

vyatta-cfg (0.14.36) unstable; urgency=low

  * fixed -o option on commit. modified empty multinode behavior so
    action is NOT executed if a multinode does not possess a value.
    Other source cleanup.

 -- slioch <slioch@eng-140.vyatta.com>  Tue, 03 Mar 2009 17:07:36 -0800

vyatta-cfg (0.14.35) unstable; urgency=low

  * Use vyatta-interfaces to generate allowed list
  * Extend vyatta-interfaces to do device name checking
  * Use check option to vyatta-interfaces.pl
  * Need to setup bonding before ethernet

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Tue, 03 Mar 2009 10:55:57 -0800

vyatta-cfg (0.14.34) unstable; urgency=low

  * added fix for nested priority and deletion failure. also priorities
    should not reside

 -- slioch <slioch@eng-140.vyatta.com>  Mon, 02 Mar 2009 22:30:23 -0800

vyatta-cfg (0.14.33) unstable; urgency=low

  [ Stephen Hemminger ]
  * Need to do bridge before ethernet

 -- Stig Thormodsrud <stig@io.vyatta.com>  Mon, 02 Mar 2009 19:00:47 -0800

vyatta-cfg (0.14.32) unstable; urgency=low

  * Ignore /sys/class/net/bonding_masters
  * Fix delete of VIF
  * Rearrange interfaces in priority table

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 02 Mar 2009 17:18:48 -0800

vyatta-cfg (0.14.31) unstable; urgency=low

  * Use iproute link to setup vif

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 02 Mar 2009 16:22:29 -0800

vyatta-cfg (0.14.30) unstable; urgency=low

  [ slioch ]
  * fixed preservation of def file when committing configuration.
    default leafs

  [ Stig Thormodsrud ]
  * Remove duplicate constants.
  * When an IP address is configured on a loopback,
    getInterfacesIPadresses('all') doesn't include them.  Include
    loopback addresses.
  * Add loopback as a type for getInterfacesIPadresses().

 -- Stig Thormodsrud <stig@io.vyatta.com>  Mon, 02 Mar 2009 15:53:28 -0800

vyatta-cfg (0.14.29) unstable; urgency=low

  * Fix call to Vyatta::Misc::getIP()
  * Fix bareword error for missing constants.

 -- Stig Thormodsrud <stig@io.vyatta.com>  Sun, 01 Mar 2009 12:13:10 -0800

vyatta-cfg (0.14.28) unstable; urgency=low

  [ slioch ]
  * new option added to commit to disable partial commit behavior. This
    allows the

  [ Stephen Hemminger ]
  * Fix --vif option

  [ slioch ]
  * Added environment variable that can be accessed in executing
    node.def script to check whether commit is in a delete or set
    action. The environmental variable is
  * fixed node walk for delete of nodes--error introduced when adding
    ordering indirection for actions in commit head.

 -- slioch <slioch@eng-140.vyatta.com>  Fri, 27 Feb 2009 20:51:52 -0800

vyatta-cfg (0.14.27) unstable; urgency=low

  [ slioch ]
  * added protocols to root nodes at end of priority listing.
  * handle seg violation if an empty line is found in the priority file.

  [ Stephen Hemminger ]
  * Fix regex for VIF name extraction
  * Add option to show VIF for interface
  * Handle MTU on all types of interface

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 26 Feb 2009 14:12:19 -0800

vyatta-cfg (0.14.26) unstable; urgency=low

  [ slioch ]
  * harvesting dead code.
  * cosmetic changes, and better to not leave interfaces root node under
    default priority.

  [ Stig Thormodsrud ]
  * Add bgp priority.

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 25 Feb 2009 18:58:12 -0800

vyatta-cfg (0.14.25) unstable; urgency=low

  * Adjust priorities
  * Change protocols to protocols/snmp

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 25 Feb 2009 10:21:18 -0800

vyatta-cfg (0.14.24) unstable; urgency=low

  * nested priority case under interfaces need mkdir with -p option to
    set

 -- slioch <slioch@eng-140.vyatta.com>  Wed, 25 Feb 2009 10:06:21 -0800

vyatta-cfg (0.14.23) unstable; urgency=low

  * replace unionfs synchronization code with piecewise copy. this
    should fix most of the problems related to nested priorities (but
    not all). also moved node profiling output from debug file

 -- slioch <slioch@eng-140.vyatta.com>  Tue, 24 Feb 2009 13:15:46 -0800

vyatta-cfg (0.14.22) unstable; urgency=low

  * move ospf/rip before interface

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Fri, 20 Feb 2009 16:22:18 -0800

vyatta-cfg (0.14.21) unstable; urgency=low

  * changes in priority to support bgp process start/stop.
  * adjust priority file to push root nodes of protocol before sub nodes
    to ensure that daemons stop/stop are

 -- slioch <slioch@eng-140.vyatta.com>  Thu, 19 Feb 2009 20:45:24 -0800

vyatta-cfg (0.14.20) unstable; urgency=low

  * Typo in regex for vtun

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 19 Feb 2009 10:01:34 -0800

vyatta-cfg (0.14.19) unstable; urgency=low

  * fix for bug 4138: reset *glob after completion

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 18 Feb 2009 16:58:03 -0800

vyatta-cfg (0.14.18) unstable; urgency=low

  [ slioch ]
  * need to add service to priority file.

  [ Bob Gilligan ]
  * Add type check function for firewall IPv6 src/dst address parameters

  [ Stephen Hemminger ]
  * Remove no longer used protocol/disable entries

  [ Bob Gilligan ]

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 18 Feb 2009 16:52:03 -0800

vyatta-cfg (0.14.17) unstable; urgency=low

  [ slioch ]
  * fixed vrrp configuration error by placing vrrp under vif after vif
    interface is created. this
  * removing incorrect placement of node.tag on firewall/group priority

  [ Stephen Hemminger ]
  * Add Vyatta::Interface::get_interfaces

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 18 Feb 2009 10:18:57 -0800

vyatta-cfg (0.14.16) unstable; urgency=low

  [ Stephen Hemminger ]
  * change bgp disable node priority

  [ slioch ]
  * added generic commit failed message on any portion of the
    configuration failing. To get
  * added dump transaction support to write to stdout rather than
    redirected /tmp/cfg-stdout.log
  * added additional debug output and fixed dumping of trans nodes to
    screen. added default

 -- slioch <slioch@eng-140.vyatta.com>  Tue, 17 Feb 2009 16:47:46 -0800

vyatta-cfg (0.14.15) unstable; urgency=low

  [ slioch ]
  * provide non-default priorities to load-balancing and cluster so
    these

  [ Stephen Hemminger ]
  * Add hook for starting protocols

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 16 Feb 2009 08:57:43 -0800

vyatta-cfg (0.14.14) unstable; urgency=low

  * enable new cli.
  * typo on setting firewall group priority.
  * removed priority specification for vrrp. checked with stig and it
    doesn't sound like priorities

 -- slioch <slioch@eng-140.vyatta.com>  Fri, 13 Feb 2009 09:06:22 -0800

vyatta-cfg (0.14.13) unstable; urgency=low

  [ Mohit Mehta ]
  * Fix Bug 3385 in completion script, thus, also fixing Bug 4120

  [ slioch ]
  * fixed reversed priority for bgp parameters and

  [ Stephen Hemminger ]
  * Add new option for checking name validity
  * Remove script for vyatta-cfg-reload

 -- Stephen Hemminger <shemminger@vyatta.com>  Wed, 11 Feb 2009 21:54:57 -0800

vyatta-cfg (0.14.12) unstable; urgency=low

  [ Stig Thormodsrud ]
  * Force firewall group to be configured before firewall.

  [ Stephen Hemminger ]
  * Change order of config load

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Sun, 08 Feb 2009 15:47:06 -0800

vyatta-cfg (0.14.11) unstable; urgency=low

  * Move config reload from quagga to vyatta-cfg

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 05 Feb 2009 14:47:22 -0800

vyatta-cfg (0.14.10) unstable; urgency=low

  * Vyatta::Config - parseTmpl convert to 3 arg open
  * Fix boolean error

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Thu, 05 Feb 2009 11:46:46 -0800

vyatta-cfg (0.14.9) unstable; urgency=low

  * Add type checking functions for 16- and 32-bit hexadecimal values.

 -- Bob Gilligan <gilligan@vyatta.com>  Wed, 04 Feb 2009 14:52:25 -0800

vyatta-cfg (0.14.8) unstable; urgency=low

  * Revert "Cleanup confg library"
  * Vyatta::Config::returnValue - change to three argument open
  * Vyatta::Config - fix perlcritic warnings from dangling return
  * Vyatta::Config - simplify boolean
  * Vyatta::Config - don't use global handle for opendir
  * Vyatta::ConfigOutput - test for exists should not use defined
  * Vyatta::Config - exists simplification

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 04 Feb 2009 11:08:50 -0800

vyatta-cfg (0.14.7) unstable; urgency=low

  * Reindent load config for clarity
  * Simplify logic
  * Replace bare file handle with variable
  * Simplify and add strict checks
  * Missing semicolon
  * Cleanup config library

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Wed, 04 Feb 2009 09:25:57 -0800

vyatta-cfg (0.14.6) unstable; urgency=low

  * ConfigOutput: Fix perlcritic warning
  * Vyatta::Misc - Fix perl critic warnings
  * DOMTree: Fix perlcritic warnings

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 26 Jan 2009 17:02:11 -0800

vyatta-cfg (0.14.5) unstable; urgency=low

  [ slioch ]
  * expose new cli functions in cfg library.
  * add lib to link when building vyatta-cfg so

  [ Stephen Hemminger ]
  * Cleanup type checker
  * config load: fix perlcritic warnings
  * config load: avoid possible bug in getConfigDiff
  * save_config: fix perlcritic warnings

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 26 Jan 2009 16:52:25 -0800

vyatta-cfg (0.14.4) unstable; urgency=low

  [ Stephen Hemminger ]
  * Fix regression in Vyatta::Misc
  * Fix isIPinInterfaces
  * update unit tests

  [ Bob Gilligan ]
  * Add more IPv6 address and prefix validation functions.

 -- Bob Gilligan <gilligan@vyatta.com>  Thu, 22 Jan 2009 13:35:03 -0800

vyatta-cfg (0.14.3) unstable; urgency=low

  [ Stephen Hemminger ]
  * Ignore IPV6 addresses in getInterfacesIPadresses
  * Fix problems with test program
  * Add test for is_ip_v4
  * Better usage of NetAddr::IP

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Wed, 14 Jan 2009 17:29:39 -0800

vyatta-cfg (0.14.2) unstable; urgency=low

  * Remove unused functions
  * Use getservbyname to find ports
  * Simplfy and cleanup misc interfaces
  * Use new interfaces routines

 -- Stephen Hemminger <stephen.hemminger@vyatta.com>  Mon, 12 Jan 2009 16:50:53 -0800

vyatta-cfg (0.14.1) unstable; urgency=low

  [ Stephen Hemminger ]
  * Avoid overhead of modprobe
  * Optimize for size
  * Simplify the debug code
  * Implement touch in perl
  * Use perl mkdir
  * Use perl unlink rather than rm
  * Use grep -c rather than running wc command
  * Check result of system commands

  [ Mohit Mehta ]
  * rectify check for bond interface
  * move submodules to VyattaMisc.pm so that they can be used elsewhere
    as well
  * check dhcp for bond vif interfaces as well
  * add check for bond vif interface to submodule

  [ An-Cheng Huang ]
  * add support for development build

  [ Mohit Mehta ]
  * move submodule to get interface related info to VyattaMisc
  * Fix Bug 3917 dhcp brings interface up for lease acquire/renew even
    though interface has been disabled in CLI

  [ Stephen Hemminger ]
  * Convert VyattaConfig (et al) to Vyatta::Config
  * Need to fix some stuff from change to Vyatta::
  * export getPortRuleString

  [ Stig Thormodsrud ]
  * "save" command broken - fix spelling error.
  * "show interfaces" broken.  Use new perl hierarchy.

  [ Stephen Hemminger ]
  * Use vyatta-link-detect
  * Need full path to link-detect

  [ Stig Thormodsrud ]
  * Fix 3991: Unable to configure DHCP server on a multinetted
    interfaceZ

  [ An-Cheng Huang ]
  * update maintainer information
  * "files" file should be removed before package build

  [ slioch ]
  * initial checkin of new commit code--building but does not replace
    original commit. New commit may be accessed through
  * removed tmp file that shouldn't have been committed.

  [ An-Cheng Huang ]
  * update Build-Depends and Depends
  * update .gitignore

  [ Stig Thormodsrud ]
  * Fix 3626: Not all protocol numbers are accepted in firewall rules.
  * Fix 3815: FW: Hyphenated port names treated as ranges in firewall
    rules.

  [ slioch ]
  * alter return check for dirctory copy on successful completion of
    node processing.
  * mod to make it easier to switch between commits

  [ Stephen Hemminger ]
  * New Vyatta::Interface infrastructure

  [ An-Cheng Huang ]

 -- An-Cheng Huang <ancheng@vyatta.com>  Thu, 08 Jan 2009 09:27:14 -0800

vyatta-cfg (0.14) unstable; urgency=low

	  3.2.0
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 3922: disable "vpn" command for operators.

  [ Stig Thormodsrud ]
  * Fix 3919: Operator level users cannot issue ping6 command

  [ Mohit Mehta ]
  * Fix Bug 3808 - OpenVPN accepts non-existent local-host option

  [ Stephen Hemminger ]
  * Allow dhcp on bonding
  * Set history timestamp at start of shell

  [ Stig Thormodsrud ]
  * Fix 3505: cli crash on delete of ipv6net static route.

  [ Stephen Hemminger ]
  * Fix dhcp on bonding
  * Expand shell history

  [ Bob Gilligan ]
  * Bugfix: 3807: Typo in config template for interfaces/loopback.
  * Bugfix: 3655

  [ Stephen Hemminger ]
  * Enforce restrictions on loopback name
  * enforce syntax restrictions on ethernet device names
  * reboot not allowed from operator level
  * Revert my bad idea
  * Fix permissions of config file during upgrade

  [ Mohit Mehta ]
  * Fix Bug 3770 vpn pre-shared keys should be obscured in "show
    configuration"

  [ rbalocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=2138

  [ slioch ]
  * fix for regression bug 3758. added additional check requiring
    opening and closing quotes before stripping takes place.
  * fix for bug 3666. strip off leading and trailing quote from default
    text values that are deleted. default values are treated

  [ rbalocca ]
  * Simplify the code
  * Fix for http://bugzilla.vyatta.com/show_bug.cgi?id=3680 (floppy
    config not loaded)

  [ Stephen Hemminger ]
  * Add entry for upcoming bonding

  [ Stig Thormodsrud ]
  * Allow operator user to execute top level "update" node.

  [ Stephen Hemminger ]
  * Handle special files in aufs
  * Fix build warnings
  * Allow use of aufs

  [ slioch ]
  * strip off whitespace in default value parsed from node.def file--
    fixes problem of deleting time-zone value without

  [ An-Cheng Huang ]
  * fix for bug 3280: ignore password etc. in history

  [ Stephen Hemminger ]
  * Vtysh is not in sbindir
  * Change back to vyatta-vtysh
  * Replace vyatta-vtysh with vtysh

  [ Stig Thormodsrud ]
  * Move is_ip_v4_or_v6() to VyattaMisc.pm so other scripts can use it.
  * Add curl package for bug 3143.

  [ Mohit Mehta ]
  * Fix Bug 3524 dhcp client doesn't insert default route on system
    reboot

  [ Stephen Hemminger ]
  * Use vtysh directly
  * mark vyatta-cfg as bash not sh script
  * Optimize delete
  * Optimize commit
  * Turn my_wrappers into macros
  * Avoid overhead of system
  * Avoid needless calls to system()
  * Add missing include
  * Add annotation to cli functions

  [ Stig Thormodsrud ]
  * Add ipv6 address to comp_help.

  [ Stephen Hemminger ]
  * type_to_name returns immutable string

  [ Stig Thormodsrud ]
  * Fix 3505: cli crashes on ipv6net type.

  [ rbalocca ]
  * Remove spurious error message during install

  [ root ]
  * fix for bug 1130. disable ctrl-c during load command to prevent
    partial load.

  [ Mohit Mehta ]
  * Fix bug 3318
  * Fix Bug 3318 ENHANCEMENT REQUEST: Option to NOT Accept DHCP MTU
    Offers Below Specified Value

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 25 Nov 2008 19:09:37 -0800

vyatta-cfg (0.13) unstable; urgency=low

	  3.1.3
  [ Mark O'Brien ]


  [ Mohit Mehta ]
  * fix bug 3524  dhcp client doesn't insert default route on system
    reboot

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 19 Aug 2008 17:48:27 -0700

vyatta-cfg (0.12) unstable; urgency=low

	  3.1.2
  [ Mark O'Brien ]


  [ Rick Balocca ]
  * Code moved for fix of bug
    http://bugzilla.vyatta.com/show_bug.cgi?id=3417

  [ Stig Thormodsrud ]
  * Prioritize vpn ahead of pppo[ea] interfaces.

  [ Mohit Mehta ]
  * removing code to update resolv.conf from here, it is better to call
    it from dhclient-script
  * => Modified VyattaConfig.pm function 'returnOrigValues()' to return
    empty array when no value is configured

  [ Michael Larson ]
  * fix for bug 3441. Selective stripping of the 'def' only needs to
    occur in one location.
  * Revert "fix for bug 3441. Removed def from listOutputNodes(), which
    allowed other code that filters out def file to be removed."

  [ root ]
  * fix for bug 3441. Removed def from listOutputNodes(), which allowed
    other code that filters out def file to be removed.

  [ rbalocca ]
  * Fix for bug http://bugzilla.vyatta.com/show_bug.cgi?id=3427

  [ An-Cheng Huang ]
  * fix for bug 3323: skip deletions of nodes with default values when
    loading

  [ Michael Larson ]
  * fix for bug 3216. added no escape option to push path for
    environmental path variable. note this is appied to all c code
    access to the

  [ Stig Thormodsrud ]
  * Partial fix for 3383: check for vyatta-config-version, warn/prompt
    that it appears to be invalid config.

  [ Michael Larson ]
  * fix for bug 3377.

  [ An-Cheng Huang ]
  * fix for bug 3403: allocate correct amount of memory for multi-valued
    nodes.

  [ Michael Larson ]
  * Revert "set load-balancing load order after interfaces are
    configured on load."

  [ Stig Thormodsrud ]
  * Fix 3396: "commit failed at rank 800" while booting with bgp peer-
    group.

  [ An-Cheng Huang ]
  * add help string for "copy" and "rename"

  [ Michael Larson ]
  * fix for bug 3400. user vyatta needed modification to discard
    command.
  * set load-balancing load order after interfaces are configured on
    load.

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Wed, 23 Jul 2008 21:36:00 -0700

vyatta-cfg (0.11) unstable; urgency=low

	  3.1.1
  [ Mark O'Brien ]


  [ Mohit Mehta ]
  * add top level op-mode commands: 'connect', 'delete', 'disconnect',
    and 'terminal'

  [ Michael Larson ]
  * fixed non-root user access for discard. also moved help string.

  [ Stig Thormodsrud ]
  * Fix 2619: Implement something similar to Juniper's "show | display
    set" functionality.
  * Fix 3143: Unable to save/load config from a remote server.

  [ Mohit Mehta ]
  * add release and renew to allowed-op file so that operator is able to
    execute them
  * better handling of allowed values for 'release/renew dhcp interface
    <>'

  [ rbalocca ]
  * Add dependency

  [ Mohit Mehta ]
  * better handling of dhcp release/renew commands
  * Fix bug 3059 Operator Level commands for DHCP client

  [ Stig Thormodsrud ]
  * Add a config ranking to prioritize bgp route-id ahead of neighbors.

  [ Mohit Mehta ]
  * -> redo the way dhcp client works. instead of using one daemon for
    all interfaces,

  [ Bob Gilligan ]
  * Bugfix: 3355

  [ An-Cheng Huang ]
  * fix for bug 2622: add "copy" and "rename" commands for configuration
    mode.

  [ Michael Larson ]
  * fix for bug 110. added discard command to configure mode. This
    command deletes local changes and keeps the user in configure mode.
  * fix for bug 3347--skip def file.o

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Sat, 28 Jun 2008 11:22:15 -0700

vyatta-cfg (0.10) unstable; urgency=low

	  3.1.0
  [ Mark O'Brien ]


  [ Stig Thormodsrud ]
  * Block reboot from config mode.
  * Add exception for /31 and /32 for ipv4 and /128 for ipv6
  * Fix 920: System allows configuration of invalid IP Address for
    subnet

  [ rbalocca ]
  * Ignore log file
  * Fix for bug #3274 https://bugzilla.vyatta.com/show_bug.cgi?id=3274

  [ Stig Thormodsrud ]
  * Force "protocols ospf parameters" to be committed before other ospf
    config.

  [ Stephen Hemminger ]
  * Avoid any problems with non-device entries in /sys/class/net
  * Remove unused dependencies

  [ Stig Thormodsrud ]
  * Fix vlan regex.

  [ An-Cheng Huang ]
  * fix for bug 3239: now support regex-based ordering for startup
    config

  [ Stig Thormodsrud ]
  * Add more granularity to config rank (commit rip, ospf, bgp
    separately).

  [ rbalocca ]
  * Fix problem with Default-Stop
  * Convert to our method of changelog creation

  [ Stig Thormodsrud ]
  * Only check for dhcp client on eth, vlan, and bridge.
  * Fix 3233 dhcp client doesn't work on bridge interface

  [ An-Cheng Huang ]
  * support "wildcard" ranking at boot time. only VRRP uses this for
    now.
  * partial fix for bug 3216: display escaped edit path correctly.

  [ Michael Larson ]
  * fix for show -all. note there is a change in how config files are
    saved--only set values are now save as opposed to set

  [ rbalocca ]
  * Add parted debian package for install-system use

  [ Michael Larson ]
  * backing out show cmd change for now on existence of def
  * final checkin as fix for bug 1219.
  * mask out def markers in config script
  * create def file to mark configuration nodes that are created by
    default, rather than a node with a default value created by a
  * modified fix for 2525--fixes problem introduced with last fix (bug
    3163)
  * revert fix for 2525 until delete on commit warnings are resolved.
  * reverse sort order on delete
  * modified node ordering code.
  * partial revert of priority support--will reapply after additional
    changes.
  * temp removal of free--possible corruption.
  * support for node priority. higher value in node.def is higher
    priority.

  [ Mohit Mehta ]
  * Fix Bug 3069 Help strings should be standardized

  [ An-Cheng Huang ]
  * partial fix for bug 2181: add new template field "priority".

  [ Michael Larson ]
  * alternate fix for 2525--force directory evaluation upstream.
  * Revert "fix for bug 2525"

  [ Mohit Mehta ]
  * Fix Bug 3069 Help strings should be standardized

  [ Michael Larson ]
  * fix for bug 2525
  * fix for bug 2549.
  * fix for bug 2507

  [ An-Cheng Huang ]
  * fix for bug 2689: sort tag nodes appropriately

  [ Mohit Mehta ]
  * Fix Bug 2825 Load should read config file from default location when
    no argument is provided.

  [ Stig Thormodsrud ]
  * Add vlan dependancy for vyatta-cfg.

  [ rbalocca ]
  * Fix a changelog problem

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@firebolt.vyatta.com>  Tue, 17 Jun 2008 09:26:38 -0700

vyatta-cfg (0.9) unstable; urgency=low

  3.0.5


 -- Mark O'Brien <mobrien@vyatta.com>  Tue, 06 May 2008 12:43:19 -0700

vyatta-cfg (0.8) unstable; urgency=low

  3.0.4
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * support "wildcard" ranking at boot time. only VRRP uses this for
    now.

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Mon, 05 May 2008 16:40:38 -0700

vyatta-cfg (0.7) unstable; urgency=low

  3.0.3
  [ Mark O'Brien ]


  [ Stephen Hemminger ]
  * Remove hack to cycle state for static routes
  * Eliminate vestigates of watchlink

  [ rbalocca ]
  * Indicate the VC4.0.2 release candidate in the changelog

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Tue, 29 Apr 2008 16:42:21 -0700

vyatta-cfg (0.6) unstable; urgency=low

  VC4.0.2
  [ Mark O'Brien ]


  [ Robert Bays ]
  * fix for bug 3177
  * cycle interface state on IP address assigment to fix static routes

  [ Stig Thormodsrud ]
  * If watchlink isn't running, don't treat it as a fatal error.

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Sat, 19 Apr 2008 11:56:07 -0700

vyatta-cfg (0.5) unstable; urgency=low

  VC4.0.2 release candidate
  [ Mark O'Brien ]


  [ Stig Thormodsrud ]
  * Fix 3034: Loopback interface controlled by "ethernet lo"

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Wed, 16 Apr 2008 09:50:08 -0700

vyatta-cfg (0.4) unstable; urgency=low

  3.0.2
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 3037: shell completion
  * add validation for more types
  * handle <> completion correctly
  * startup config ordering
  * fix for bug 3032:
  * fix for bug 2675: correctly detect newly created config nodes.
  * add function to delete watchlink exclude entries based on ID.
  * fix for bug 2689: sort tag nodes appropriately
  * code cleanup (remove some evil copy-and-paste instances).
  * fix for bug 3097: correctly detect deleted tag
  * fix for bug 3090: commit "policy" before "protocols" at boot time.

  [ Mark O'Brien ]
  * 3.0.1

  [ Stephen Hemminger ]
  * handle delete address request if address is already removed
  * stop watchlink when address is removed
  * handle multiple address deletion when link is down

  [ Stig Thormodsrud ]
  * Add utilitly script to add/removed entries to watchlink exclude
    file.
  * Add duplicate check to watchlink exclude file.

  [ rbalocca ]
  * Fix debian dependencies
  * Set dependencies on either bash or vyatta-bash

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Fri, 04 Apr 2008 18:00:44 -0700

vyatta-cfg (0.3) unstable; urgency=low

  VC4.0.1
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * fix for bug 2868: return failure for invalid values.
  * fix for bug 2749: add u32 range check
  * fix for bug 2912: direct config loading output to syslog.
  * fix for bug 2924: set admin flag for root
  * fix for bug 2950: raise config error messages during boot to warning
    level.
  * add LESSSECURE
  * partial fix for bug 2987: use "less" instead of "more", and disable
  * handle "<*>" allowed values

  [ Bob Gilligan ]
  * Bugfix: 2653
  * Bugfix: 2885
  * Bugfix: 2986

  [ Christopher Liljenstolpe ]
  * Fix 2954: IPv6 addresses that have a-f in the address fail.

  [ Mohit Mehta ]
  * CLI tab enhancement at "set interfaces ethernet <> address"
  * CLI tab enhancement at "set interfaces ethernet <> address"

  [ Robert Bays ]
  * fix for bugs 2725 and 2999
  * fix for bugs 2725 2999

  [ Stephen Hemminger ]
  * Read qos-policy before setting interface qos-policy
  * Replace VPL with GPLv2
  * Convert from VPL 1.0 to GPLv2
  * more robust handling of set mac address
  * Don't allow operator to run init-floppy

  [ rbalocca ]
  * Merge changelog fix to glendale
  * Vyatta-cfg postinst was preventing upgrade
  * Add VPL to scripts and fix lintian errors
  * Fix problems with upgrading (and also fix lintian errors)
  * Fix problems with upgrading (and also fix lintian errors)
  * Remove a dependency listed twice
  * Add GPLv2 to additional Vyatta created scripts

  [ Mark O'Brien ]

 -- Mark O'Brien <mobrien@vyatta.com>  Tue, 18 Mar 2008 19:04:10 -0700

vyatta-cfg (0.2) unstable; urgency=low

  vc4.0.0
  [ Mark O'Brien ]


  [ An-Cheng Huang ]
  * rewrite lexical analyzer to support simplified templates.
  * add "official" support for "comp_help" and "allowed" in config
    template
  * allow non-indented line continuation
  * skip spaces immediately after field names
  * handle empty action
  * * don't require backslash line-continuation in expressions.
  * allow non-txt values in initial state (for default).

 -- An-Cheng Huang <mobrien@vyatta.com>  Mon, 25 Feb 2008 17:38:45 -0800

vyatta-cfg (0.1) unstable; urgency=low

  * Initial Release.

 -- An-Cheng Huang <ancheng@vyatta.com>  Mon, 24 Sep 2007 17:31:53 -0700