vyatta-op (0.13.53) unstable; urgency=low * Change vyatta-vtysh to vtysh -- Stephen Hemminger Mon, 08 Mar 2010 16:34:53 -0800 vyatta-op (0.13.52) unstable; urgency=low * Bugfix 5394: Move colon characters to their proper locations. -- Bob Gilligan Thu, 04 Mar 2010 16:37:51 -0800 vyatta-op (0.13.51) unstable; urgency=low * Bugfix 5404: Handle RAID resynchronization on image-installed systems. -- Bob Gilligan Wed, 03 Mar 2010 18:11:12 -0800 vyatta-op (0.13.50) unstable; urgency=low * UNRELEASED -- An-Cheng Huang Wed, 17 Feb 2010 16:15:49 -0800 vyatta-op (0.13.49) unstable; urgency=low * Fix bug 4115 'clear nat translations' does not clear nat translations * clear expect table as well -- Mohit Mehta Wed, 03 Feb 2010 18:26:56 -0800 vyatta-op (0.13.48) unstable; urgency=low * Bugfix 2539: Validate input when user specifies image name. -- Bob Gilligan Tue, 02 Feb 2010 12:07:37 -0800 vyatta-op (0.13.47) unstable; urgency=low * Merge branch 'kenwood' of 192.168.100.1:git/vyatta-op into kenwood * Fix completion string * Ignore subst vars file * Fix allowed strings for hostname/ipaddress -- Stephen Hemminger Tue, 02 Feb 2010 10:46:07 -0800 vyatta-op (0.13.46) unstable; urgency=low * Expand all possible interfaces with leases for renew -- Stephen Hemminger Thu, 28 Jan 2010 17:21:45 -0800 vyatta-op (0.13.45) unstable; urgency=low * Bugfix 5238: Prevent the running image from being deleted -- Bob Gilligan Mon, 25 Jan 2010 15:49:00 -0800 vyatta-op (0.13.44) unstable; urgency=low * Re-factor image installation commands. -- Bob Gilligan Mon, 25 Jan 2010 11:36:48 -0800 vyatta-op (0.13.43) unstable; urgency=low * Remove system accounting -- Stephen Hemminger Thu, 21 Jan 2010 18:17:12 -0800 vyatta-op (0.13.42) unstable; urgency=low * Add accounting per user -- Stephen Hemminger Thu, 21 Jan 2010 13:47:01 -0800 vyatta-op (0.13.41) unstable; urgency=low * Add image name completion for two system image commands. -- Bob Gilligan Mon, 11 Jan 2010 17:07:51 -0800 vyatta-op (0.13.40) unstable; urgency=low * Change operational mode commands to match those in design document. -- Bob Gilligan Fri, 08 Jan 2010 17:41:23 -0800 vyatta-op (0.13.39) unstable; urgency=low * Handle various conditions and cleanup. -- Bob Gilligan Wed, 06 Jan 2010 11:50:32 -0800 vyatta-op (0.13.38) unstable; urgency=low * Show interfaces no longer uses Vyatta::Config * Simple SNMP operational command -- Stephen Hemminger Wed, 06 Jan 2010 08:30:17 -0800 vyatta-op (0.13.37) unstable; urgency=low * Allow deletion of disk-based non-image installation. -- Bob Gilligan Tue, 05 Jan 2010 14:59:33 -0800 vyatta-op (0.13.36) unstable; urgency=low * Don't allow operator to run show system login users -- Stephen Hemminger Mon, 04 Jan 2010 16:51:26 -0800 vyatta-op (0.13.35) unstable; urgency=low * Indicate when system was booted via image. -- Bob Gilligan Mon, 04 Jan 2010 14:29:13 -0800 vyatta-op (0.13.34) unstable; urgency=low * Fix typo in show dhcp client lease script -- Stephen Hemminger Fri, 25 Dec 2009 15:22:26 -0800 vyatta-op (0.13.33) unstable; urgency=low * Add help text for install-image URL mode. -- Bob Gilligan Wed, 23 Dec 2009 16:39:19 -0800 vyatta-op (0.13.32) unstable; urgency=low * Fix deletion of image from disk-based image. -- Bob Gilligan Wed, 23 Dec 2009 11:22:40 -0800 vyatta-op (0.13.31) unstable; urgency=low * Allow displaying and switching to disk-based installations. -- Bob Gilligan Wed, 23 Dec 2009 10:55:49 -0800 vyatta-op (0.13.30) unstable; urgency=low * Use perl to scan directory * Get rid of dead code. * Use perl to read resolv.conf * Rearrange code for clarity -- Stephen Hemminger Tue, 22 Dec 2009 14:46:28 -0800 vyatta-op (0.13.29) unstable; urgency=low * Add display of accounting information -- Stephen Hemminger Fri, 18 Dec 2009 16:27:24 -0800 vyatta-op (0.13.28) unstable; urgency=low * Use new cleaner command arguments -- Stephen Hemminger Wed, 16 Dec 2009 12:06:35 -0800 vyatta-op (0.13.27) unstable; urgency=low * add op command for image removal -- An-Cheng Huang Wed, 11 Nov 2009 18:19:24 -0800 vyatta-op (0.13.26) unstable; urgency=low * Prevent problems on upgrade for files moved from vyatta-serial to this package -- Mohit Mehta Mon, 09 Nov 2009 16:06:49 -0800 vyatta-op (0.13.25) unstable; urgency=low * move generic interface op commands to vyatta-op -- An-Cheng Huang Mon, 09 Nov 2009 11:51:05 -0800 vyatta-op (0.13.24) unstable; urgency=low * add .merge-branch-exclude * add install-image op commands * add op commands for installed images -- An-Cheng Huang Wed, 04 Nov 2009 15:32:46 -0800 vyatta-op (0.13.23) unstable; urgency=low * Decolorize show system login users -- Stephen Hemminger Mon, 14 Sep 2009 17:17:04 -0700 vyatta-op (0.13.22) unstable; urgency=low * Add show system login users -- Stephen Hemminger Fri, 11 Sep 2009 23:19:12 -0700 vyatta-op (0.13.21) unstable; urgency=low [ Stephen Hemminger ] * remove unwanted allowed tag [ slioch ] * now supports quoted values for op mode commands -- slioch Thu, 03 Sep 2009 11:03:41 -0700 vyatta-op (0.13.20) unstable; urgency=low [ Stig Thormodsrud ] * Change vyatta-op dependency from ssmtp to mail-transport-agent. [ Stephen Hemminger ] * Add 'show interfaces pseudo-ethernet' * Fix completion for VIF * Ignore ntp.conf server options * Add ethtool output to show tech-support * Remove show tech-support bug related to interfaces * Add operator to show disk format * Fix handling of invalid bonding name * Fix error message from show bonding * Cleanup show bonding script * Make bonding operational mode consistent with ethernet * Remove pseudo-ethernet vif templates * Add missing template for 'show interfaces bonding bondX' * Remove bogus statistics template -- Stephen Hemminger Wed, 12 Aug 2009 22:06:40 -0700 vyatta-op (0.13.19) unstable; urgency=low * UNRELEASED -- An-Cheng Huang Fri, 29 May 2009 18:36:59 -0700 vyatta-op (0.13.18) unstable; urgency=low * Show more detail about interfaces in show tech-support * Make tech-support show more PCI info -- Stephen Hemminger Thu, 28 May 2009 14:17:44 -0700 vyatta-op (0.13.17) unstable; urgency=low [ Conny Brunnkvist ] * Add "show configuration files". -- Stig Thormodsrud Mon, 25 May 2009 13:01:09 -0700 vyatta-op (0.13.16) unstable; urgency=low * add local env hook -- An-Cheng Huang Mon, 23 Mar 2009 16:56:44 -0700 vyatta-op (0.13.15) unstable; urgency=low * Fix shutdown at to return to prompt -- Stephen Hemminger Thu, 19 Mar 2009 15:38:27 -0700 vyatta-op (0.13.14) unstable; urgency=low * Add show shutdown * fix email in changelog * Add dependency on perl libtimedate * Fix formatting of output * Use nohup to avoid extra messages -- Stephen Hemminger Thu, 12 Mar 2009 11:10:53 -0700 vyatta-op (0.13.13) unstable; urgency=low * Fix typo in shutdown cancel * Cleanup show disk format * Cleanup show disk format * Fix lsof options in tech-support -- Stephen Hemminger Wed, 11 Mar 2009 17:58:58 -0700 vyatta-op (0.13.12) unstable; urgency=low [ Stig Thormodsrud ] * Fix 4183: no auto completion for 'clear vrrp interfaces <> group ?'. -- An-Cheng Huang Mon, 09 Mar 2009 19:44:29 -0700 vyatta-op (0.13.11) unstable; urgency=low * Remove [y] from prompt -- Stephen Hemminger Sun, 08 Mar 2009 14:12:48 -0700 vyatta-op (0.13.10) unstable; urgency=low * Fix broken path in 'show arp '. -- Stig Thormodsrud Thu, 05 Mar 2009 15:09:17 -0800 vyatta-op (0.13.9) unstable; urgency=low * Use new --vif option to find allowed interfaces * Add default option to yesno for shutdown * Fix out of date stuff in README * Fix expansion of bonding VIF * Use show-interface to allow clear on all interface types * Use getInterfaces in vyatta-show-interfaces.pl -- Stephen Hemminger Mon, 02 Mar 2009 17:21:27 -0800 vyatta-op (0.13.8) unstable; urgency=low * Fix problems with new show-interfaces.pl * Invalid action should cause usage message -- Stephen Hemminger Wed, 18 Feb 2009 10:19:16 -0800 vyatta-op (0.13.7) unstable; urgency=low * Prompt before immediate shutdown * Put delayed shutdown in background to allow for other commands. * Enable strict in cpu summary * Use common Vyatta:: library -- Stephen Hemminger Tue, 17 Feb 2009 17:04:34 -0800 vyatta-op (0.13.6) unstable; urgency=low * Change show log directory to use 'if' * Show arp: don't resolve host names * Add show arp eth0 * Use vyatta-interfaces --show to display allowed types * Don't resolve hostnames in show tech-support * Use lesspipe to unzip log files * Add shutdown command to CLI -- Stephen Hemminger Thu, 12 Feb 2009 14:58:54 -0800 vyatta-op (0.13.5) unstable; urgency=low [ Mohit Mehta ] * Fix Bug 4120 Extraneous item at top of Operation tree [ Stephen Hemminger ] * Add heading to 'show users' [ Bob Gilligan ] * Explicitly use the shell builtin "test" command since "test" is now a -- Bob Gilligan Wed, 11 Feb 2009 09:41:40 -0800 vyatta-op (0.13.4) unstable; urgency=low * Fix CPU summary -- Stephen Hemminger Fri, 30 Jan 2009 11:05:18 -0800 vyatta-op (0.13.3) unstable; urgency=low * New show system cpu * Move 'show system cpu' to 'show hardware cpu summary' * Change name of cpu summary script and rearrange -- Stephen Hemminger Thu, 29 Jan 2009 16:34:26 -0800 vyatta-op (0.13.2) unstable; urgency=low [ Justin Fletcher ] * Move tcp and udp commands under system/connections -- An-Cheng Huang Tue, 13 Jan 2009 18:15:06 -0800 vyatta-op (0.13.1) unstable; urgency=low [ Stephen Hemminger ] * Add commands to display open sockets * Need full path to ss command [ An-Cheng Huang ] * correct package dependency [ Mohit Mehta ] * add bond interfaces to list of allowed interfaces for dhcp release/renew [ An-Cheng Huang ] * add support for development build [ Mohit Mehta ] * make changes for submodule moved to VyattaMisc [ Stephen Hemminger ] * Decode bonding modes * Convert to Vyatta:: [ Stig Thormodsrud ] * "show interfaces" broken. Use new perl hierarchy. [ Stephen Hemminger ] * Get rid of reference to OFR [ Stig Thormodsrud ] * Add option to show counters for multiple interfaces. [ An-Cheng Huang ] * update maintainer information * "files" file should be removed before package build [ Mohit Mehta ] * Fix Bug 4022 dynamic dns config fails during system boot if interface does not exist [ An-Cheng Huang ] -- An-Cheng Huang Thu, 08 Jan 2009 09:42:49 -0800 vyatta-op (0.13) unstable; urgency=low 3.2.0 [ Mark O'Brien ] [ Mohit Mehta ] * add 'ppp interface-name' to output of 'show dns forwarding nameserver' * add wirelessmodem to interface hash to pick up description from CLI [ Stephen Hemminger ] * Sort interfaces in bonding operational mode commands * Show correct statistics on slaves [ Stig Thormodsrud ] * Rename "show arp6" to "show ipv6 neighbors". [ Stephen Hemminger ] * need sudo before ethtool -S * Save/restore command history in configure [ Bob Gilligan ] * Bugfix: 3841: Allow admin level users to run the RAID op mode commands. [ Stephen Hemminger ] * fix 'show history N' * Fix references to ethtool * Better format of output * Show command history [ Robert Bays ] * move show system usb to vyatta-op [ Bob Gilligan ] * Bugfix: 3744 [ Stephen Hemminger ] * Revert insecure method of displaying configuration [ Mohit Mehta ] * Fix Bug 3763 Configuration is not available to operator in "show tech-support" * make sure file has been written to before extracting [ Rick Balocca ] * Recognize aufs [ Mohit Mehta ] * Fix Bug 3609 "show tech-support" does not display open file information for operator level user [ Stig Thormodsrud ] * Fix 2881: "show tech-support" should limit the output of "show ip route" [ Bob Gilligan ] * Bugfix: 3333 * Bugfix: 1725 [ Mohit Mehta ] * Fix Bug 3716 - Dynamic DNS status may incorrectly indicate lack of configuration [ Stig Thormodsrud ] * Revert "Fix less prompt." * Fix less prompt. [ Stephen Hemminger ] * remove debug code * Fix script for bond with no slaves * Show all interfaces * Add preliminary operational mode support for bonding * Add operational mode template for ethtool statistics [ Mohit Mehta ] * change op-mode command 'clear dns forwarding statistics' to 'clear dns forwarding all' * add code for op-mode Dynamic DNS commands [ Bob Gilligan ] * Add operational mode commands for RAID. [ Mohit Mehta ] * change command 'clear dns forwarding process' to 'clear dns forwarding statistics' * allowed values for dhcp release/renew should show bridges as well if configured to use dhcp * add command 'clear dns forwarding process' to restart dnsmasq and clear all statistics [ Stig Thormodsrud ] * Fix 3540: ssmtp complaining that it's unable to locate mail [ Mohit Mehta ] * better wording for output of 'show dns forwarding nameservers' [ Stig Thormodsrud ] * Fix "show interfaces ethernet" after "clear interfaces counters" [ Mohit Mehta ] * use active config directory base to get config values from op-mode * code for op-mode command: 'show dns forwarding nameservers' * dns-forwarding op-mode commands: * add 'clear dns forwarding cache' command [ Stig Thormodsrud ] * Fix IPv6 help string. * Add some ipv6 op mode commands. * The at package pulls in citadel-mta, use small mta. * Add missing "show reboot". * Enable "reload at|cancel". [ An-Cheng Huang ] * add openvpn interfaces to "show interfaces" [ Mark O'Brien ] -- Mark O'Brien Tue, 25 Nov 2008 19:10:16 -0800 vyatta-op (0.12) unstable; urgency=low 3.1.2 [ Mark O'Brien ] [ Mohit Mehta ] * better detection of whether domain-name set using CLI is overriding * => display text saying the domain-name received from dhcp-server [ An-Cheng Huang ] * fix for bug 3451: add messages output [ Stephen Hemminger ] * Turn on paging of tail when showing count lines * Show files completion [ Mohit Mehta ] * prevents showing backend error to user on traceroute when name- server not set * Fix Bug 2871 Internal errors reported with traceroute [ An-Cheng Huang ] * fix for bug 3414: make op mode functions available in config mode. [ Mohit Mehta ] * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI [ Mark O'Brien ] -- Mark O'Brien Wed, 23 Jul 2008 21:36:10 -0700 vyatta-op (0.11) unstable; urgency=low 3.1.1 [ Mark O'Brien ] [ Mohit Mehta ] * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI * Bug 3385 incomplete command 'run' in configure mode produces backend error to user * Fix Bug 3378 user "vyatta" got "permission denied" after executing "renew dhcp ..." and/or "release dhcp ..." [ rbalocca ] * Output was sometimes missing important white space [ Mohit Mehta ] * added code for allowed values for op-mode dhcp release/renew lease commands * Fix bug 3059 Operator Level commands for DHCP client * deleting op-command 'clear dhcp client process' as its handling [ Mark O'Brien ] -- Mark O'Brien Sat, 28 Jun 2008 11:22:25 -0700 vyatta-op (0.10) unstable; urgency=low 3.1.0 [ Mark O'Brien ] [ Stephen Hemminger ] * Do chomp in accessor routine for sysfs * add completions for show files [ Stig Thormodsrud ] * Add sanity check if getlogin() fails. [ Stephen Hemminger ] * Fix use of invalid variable [ Stig Thormodsrud ] * Fix 3328: operator can't issue "show vrrp" * Fix 787: Add command to force vrrp state transition to backup. * Fix 88: Feature Request: Reboot Command (add confirmation) * Fix 2705: Add "clear vrrp process" command. * Fix 3155: setting the third vrrp member with the highest priority doesn't change (update) the backup [ rbalocca ] * Ignore derived files [ Stephen Hemminger ] * Use perl to read sysfs directly [ rbalocca ] * Convert to our method of changelog creation [ Stig Thormodsrud ] * Fix 3233: dhcp client doesn't work on bridge interface [ Bob Gilligan ] * Bugfix: 3228 * Bugfix: 2858 * Enable display of info about ADSL interfaces. [ Mohit Mehta ] * Fix Bug 3069 Help strings should be standardized * Fix Bug 3069 Help strings should be standardized * Fix Bug 3069 Help strings should be standardized * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI * Fix Bug 3069 Help strings should be standardized [ Stig Thormodsrud ] * Fix 3062: "Show interfaces" displays interfaces in lexicographic, not numeric, order [ Mohit Mehta ] * Fix Bug 2871 Internal errors reported with traceroute [ Tom Grennan ] * record selected vtysh (vyatta-quagga vs quagga) in exported shell variable * donot pipe through VYATTA_PAGER if run_cmd begins with LESSOPEN, less, pager, or tail * use less prompt to display the "show" content * fix typo in bug fix 3017 * this is an architecture independent package * fix bug 3017 [ Mohit Mehta ] * Fix Bug 802 VRRP - add "show vrrp summary" command (TC 3.2.5.7.2) [ Mark O'Brien ] -- Mark O'Brien Tue, 17 Jun 2008 09:27:18 -0700 vyatta-op (0.9) unstable; urgency=low 3.0.5 -- Mark O'Brien Tue, 06 May 2008 12:43:38 -0700 vyatta-op (0.8) unstable; urgency=low 3.0.4 -- Mark O'Brien Mon, 05 May 2008 16:40:56 -0700 vyatta-op (0.7) unstable; urgency=low 3.0.3 [ Mark O'Brien ] [ rbalocca ] * Indicate the VC4.0.2 release candidate in the changelog [ Mark O'Brien ] -- Mark O'Brien Tue, 29 Apr 2008 16:42:42 -0700 vyatta-op (0.6) unstable; urgency=low VC4.0.2 -- Mark O'Brien Sat, 19 Apr 2008 11:56:25 -0700 vyatta-op (0.5) unstable; urgency=low VC4.0.2 release candidate [ Mark O'Brien ] [ Stig Thormodsrud ] * "show bridge brX" doesn't work. Use full path to brctl. [ Mark O'Brien ] -- Mark O'Brien Wed, 16 Apr 2008 09:50:26 -0700 vyatta-op (0.4) unstable; urgency=low 3.0.2 [ Mark O'Brien ] * 3.0.1 [ rbalocca ] * Fix debian dependencies * Line up the colons with the copyright notice (in show version) * Set dependencies on either bash or vyatta-bash [ Mark O'Brien ] -- Mark O'Brien Fri, 04 Apr 2008 18:01:12 -0700 vyatta-op (0.3) unstable; urgency=low VC4.0.1 [ Mark O'Brien ] [ An-Cheng Huang ] * * fix for bug 2771: bind space to completion for vbash users. * Revert "* fix for bug 2771: bind space to completion for vbash users." * fix for bug 2911: check log file name * add quoting for inline scripts in templates * show commands don't need sudo * revert sudo removal for "identify" command since the kernel change * partial fix for bug 2771: change default for root and add command for [ Bob Gilligan ] * Bugfix: 2879 [ Christopher LILJENSTOLPE ] * Fix 2965: IPv6 Interface information not shown in show interfaces [ Justin Fletcher ] * Follow log file through log rotation [ Mohit Mehta ] * Fix Bug 2707 Missing from Glendale * Fix Bug 2707 Missing from Glendale * Fix Bug 2707 Missing from Glendale * Fix Bug 2863 "show bridge" prompts for sudo password * Fix Bug 2707 Missing from Glendale [ Stephen Hemminger ] * add command to show end of log file * bridge status commands don't need sudo * no need for sudo to read log messages * use sysfs rather dmidecode to look at hardware information * remove root requirement * Use hardcoded path to ethtool * don't use sudo-users for ip commands * no longer need sudo-users links for commands * tech-support is a shell script * Add show license command * Update license from VPL 1.0 to GPLv2 * remove init-floppy * Fix this a different way. * Move init-floppy to /opt/vyatta/sbin * don't run commands in subshell * Need to run commands via eval * Better fix for interrupted shell commands problem. [ Stig Thormodsrud ] * Fix operator permissions for "clear arp" and "clear ip route cache". * Fix operator permissions for "clear interface counters" and "clear dhcp client process" * Add quotes to user entered parameters * Add quotes around user input [ rbalocca ] * Remove postrm from configure.ac, since it was deleted * Fix syntax error in control file + add a missing dependency: "less" [ Mark O'Brien ] -- Mark O'Brien Tue, 18 Mar 2008 19:05:07 -0700 vyatta-op (0.2) unstable; urgency=low vc4.0.0 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 2587: add "identify" command under "show interfaces ethernet". * bind '?' to "possible-completions" for help [ Bob Gilligan ] * Teach the vyatta-show-interfaces script about PPPOE interfaces. * Bugfix: 2634 * Bugfix: 2712 [ Mark O'Brien ] * Added "clear console" command to clear screen. [ Stephen Hemminger ] * running brctl doesn't need root privledges * no longer need sudo for ethtool * no need for sudo when using ethtool * remove usage of sudo in tech-support script * remove unneeded install steps * Revert "remove unneeded install steps" * Revert "remove usage of sudo in tech-support script" * Revert "no need for sudo when using ethtool" * Revert "no longer need sudo for ethtool" * Revert "running brctl doesn't need root privledges" [ Stig Thormodsrud ] * add 'show dhcp client leases' * fix 'show vrrp interface <>' * - Add "show ip route forward" * Change 'show dhcp client' to 'show dhcp client leases' * Add 'clear arp ' bug 2702 * Fix 2710: Missing hardware commands * - Fix bug 776: need "clear interface" command to clear counters * Add "clear dhcp client process". * Fix "show dhcp client leases" so that it will parse multiple name servers. * Change printf to use "u" instead of "d". Still need to handle 32 bit counter roll. * Handle 32 bit counter roll in "show interfaces". [ Tom Grennan ] * fix (or at least improve) bug 2519 [ Mark O'Brien ] -- Mark O'Brien Mon, 25 Feb 2008 17:39:32 -0800 vyatta-op (0.1) unstable; urgency=low * Initial Release. -- Tom Grennan Mon, 17 Sep 2007 15:29:15 -0700