vyatta-op (0.13.2) unstable; urgency=low [ Justin Fletcher ] * Move tcp and udp commands under system/connections -- An-Cheng Huang Tue, 13 Jan 2009 18:15:06 -0800 vyatta-op (0.13.1) unstable; urgency=low [ Stephen Hemminger ] * Add commands to display open sockets * Need full path to ss command [ An-Cheng Huang ] * correct package dependency [ Mohit Mehta ] * add bond interfaces to list of allowed interfaces for dhcp release/renew [ An-Cheng Huang ] * add support for development build [ Mohit Mehta ] * make changes for submodule moved to VyattaMisc [ Stephen Hemminger ] * Decode bonding modes * Convert to Vyatta:: [ Stig Thormodsrud ] * "show interfaces" broken. Use new perl hierarchy. [ Stephen Hemminger ] * Get rid of reference to OFR [ Stig Thormodsrud ] * Add option to show counters for multiple interfaces. [ An-Cheng Huang ] * update maintainer information * "files" file should be removed before package build [ Mohit Mehta ] * Fix Bug 4022 dynamic dns config fails during system boot if interface does not exist [ An-Cheng Huang ] -- An-Cheng Huang Thu, 08 Jan 2009 09:42:49 -0800 vyatta-op (0.13) unstable; urgency=low 3.2.0 [ Mark O'Brien ] [ Mohit Mehta ] * add 'ppp interface-name' to output of 'show dns forwarding nameserver' * add wirelessmodem to interface hash to pick up description from CLI [ Stephen Hemminger ] * Sort interfaces in bonding operational mode commands * Show correct statistics on slaves [ Stig Thormodsrud ] * Rename "show arp6" to "show ipv6 neighbors". [ Stephen Hemminger ] * need sudo before ethtool -S * Save/restore command history in configure [ Bob Gilligan ] * Bugfix: 3841: Allow admin level users to run the RAID op mode commands. [ Stephen Hemminger ] * fix 'show history N' * Fix references to ethtool * Better format of output * Show command history [ Robert Bays ] * move show system usb to vyatta-op [ Bob Gilligan ] * Bugfix: 3744 [ Stephen Hemminger ] * Revert insecure method of displaying configuration [ Mohit Mehta ] * Fix Bug 3763 Configuration is not available to operator in "show tech-support" * make sure file has been written to before extracting [ Rick Balocca ] * Recognize aufs [ Mohit Mehta ] * Fix Bug 3609 "show tech-support" does not display open file information for operator level user [ Stig Thormodsrud ] * Fix 2881: "show tech-support" should limit the output of "show ip route" [ Bob Gilligan ] * Bugfix: 3333 * Bugfix: 1725 [ Mohit Mehta ] * Fix Bug 3716 - Dynamic DNS status may incorrectly indicate lack of configuration [ Stig Thormodsrud ] * Revert "Fix less prompt." * Fix less prompt. [ Stephen Hemminger ] * remove debug code * Fix script for bond with no slaves * Show all interfaces * Add preliminary operational mode support for bonding * Add operational mode template for ethtool statistics [ Mohit Mehta ] * change op-mode command 'clear dns forwarding statistics' to 'clear dns forwarding all' * add code for op-mode Dynamic DNS commands [ Bob Gilligan ] * Add operational mode commands for RAID. [ Mohit Mehta ] * change command 'clear dns forwarding process' to 'clear dns forwarding statistics' * allowed values for dhcp release/renew should show bridges as well if configured to use dhcp * add command 'clear dns forwarding process' to restart dnsmasq and clear all statistics [ Stig Thormodsrud ] * Fix 3540: ssmtp complaining that it's unable to locate mail [ Mohit Mehta ] * better wording for output of 'show dns forwarding nameservers' [ Stig Thormodsrud ] * Fix "show interfaces ethernet" after "clear interfaces counters" [ Mohit Mehta ] * use active config directory base to get config values from op-mode * code for op-mode command: 'show dns forwarding nameservers' * dns-forwarding op-mode commands: * add 'clear dns forwarding cache' command [ Stig Thormodsrud ] * Fix IPv6 help string. * Add some ipv6 op mode commands. * The at package pulls in citadel-mta, use small mta. * Add missing "show reboot". * Enable "reload at|cancel". [ An-Cheng Huang ] * add openvpn interfaces to "show interfaces" [ Mark O'Brien ] -- Mark O'Brien Tue, 25 Nov 2008 19:10:16 -0800 vyatta-op (0.12) unstable; urgency=low 3.1.2 [ Mark O'Brien ] [ Mohit Mehta ] * better detection of whether domain-name set using CLI is overriding * => display text saying the domain-name received from dhcp-server [ An-Cheng Huang ] * fix for bug 3451: add messages output [ Stephen Hemminger ] * Turn on paging of tail when showing count lines * Show files completion [ Mohit Mehta ] * prevents showing backend error to user on traceroute when name- server not set * Fix Bug 2871 Internal errors reported with traceroute [ An-Cheng Huang ] * fix for bug 3414: make op mode functions available in config mode. [ Mohit Mehta ] * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI [ Mark O'Brien ] -- Mark O'Brien Wed, 23 Jul 2008 21:36:10 -0700 vyatta-op (0.11) unstable; urgency=low 3.1.1 [ Mark O'Brien ] [ Mohit Mehta ] * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI * Bug 3385 incomplete command 'run' in configure mode produces backend error to user * Fix Bug 3378 user "vyatta" got "permission denied" after executing "renew dhcp ..." and/or "release dhcp ..." [ rbalocca ] * Output was sometimes missing important white space [ Mohit Mehta ] * added code for allowed values for op-mode dhcp release/renew lease commands * Fix bug 3059 Operator Level commands for DHCP client * deleting op-command 'clear dhcp client process' as its handling [ Mark O'Brien ] -- Mark O'Brien Sat, 28 Jun 2008 11:22:25 -0700 vyatta-op (0.10) unstable; urgency=low 3.1.0 [ Mark O'Brien ] [ Stephen Hemminger ] * Do chomp in accessor routine for sysfs * add completions for show files [ Stig Thormodsrud ] * Add sanity check if getlogin() fails. [ Stephen Hemminger ] * Fix use of invalid variable [ Stig Thormodsrud ] * Fix 3328: operator can't issue "show vrrp" * Fix 787: Add command to force vrrp state transition to backup. * Fix 88: Feature Request: Reboot Command (add confirmation) * Fix 2705: Add "clear vrrp process" command. * Fix 3155: setting the third vrrp member with the highest priority doesn't change (update) the backup [ rbalocca ] * Ignore derived files [ Stephen Hemminger ] * Use perl to read sysfs directly [ rbalocca ] * Convert to our method of changelog creation [ Stig Thormodsrud ] * Fix 3233: dhcp client doesn't work on bridge interface [ Bob Gilligan ] * Bugfix: 3228 * Bugfix: 2858 * Enable display of info about ADSL interfaces. [ Mohit Mehta ] * Fix Bug 3069 Help strings should be standardized * Fix Bug 3069 Help strings should be standardized * Fix Bug 3069 Help strings should be standardized * Fix Bug 1059 Feature Request: integrate 'tcpdump' and 'tethereal' into Vyatta CLI * Fix Bug 3069 Help strings should be standardized [ Stig Thormodsrud ] * Fix 3062: "Show interfaces" displays interfaces in lexicographic, not numeric, order [ Mohit Mehta ] * Fix Bug 2871 Internal errors reported with traceroute [ Tom Grennan ] * record selected vtysh (vyatta-quagga vs quagga) in exported shell variable * donot pipe through VYATTA_PAGER if run_cmd begins with LESSOPEN, less, pager, or tail * use less prompt to display the "show" content * fix typo in bug fix 3017 * this is an architecture independent package * fix bug 3017 [ Mohit Mehta ] * Fix Bug 802 VRRP - add "show vrrp summary" command (TC 3.2.5.7.2) [ Mark O'Brien ] -- Mark O'Brien Tue, 17 Jun 2008 09:27:18 -0700 vyatta-op (0.9) unstable; urgency=low 3.0.5 -- Mark O'Brien Tue, 06 May 2008 12:43:38 -0700 vyatta-op (0.8) unstable; urgency=low 3.0.4 -- Mark O'Brien Mon, 05 May 2008 16:40:56 -0700 vyatta-op (0.7) unstable; urgency=low 3.0.3 [ Mark O'Brien ] [ rbalocca ] * Indicate the VC4.0.2 release candidate in the changelog [ Mark O'Brien ] -- Mark O'Brien Tue, 29 Apr 2008 16:42:42 -0700 vyatta-op (0.6) unstable; urgency=low VC4.0.2 -- Mark O'Brien Sat, 19 Apr 2008 11:56:25 -0700 vyatta-op (0.5) unstable; urgency=low VC4.0.2 release candidate [ Mark O'Brien ] [ Stig Thormodsrud ] * "show bridge brX" doesn't work. Use full path to brctl. [ Mark O'Brien ] -- Mark O'Brien Wed, 16 Apr 2008 09:50:26 -0700 vyatta-op (0.4) unstable; urgency=low 3.0.2 [ Mark O'Brien ] * 3.0.1 [ rbalocca ] * Fix debian dependencies * Line up the colons with the copyright notice (in show version) * Set dependencies on either bash or vyatta-bash [ Mark O'Brien ] -- Mark O'Brien Fri, 04 Apr 2008 18:01:12 -0700 vyatta-op (0.3) unstable; urgency=low VC4.0.1 [ Mark O'Brien ] [ An-Cheng Huang ] * * fix for bug 2771: bind space to completion for vbash users. * Revert "* fix for bug 2771: bind space to completion for vbash users." * fix for bug 2911: check log file name * add quoting for inline scripts in templates * show commands don't need sudo * revert sudo removal for "identify" command since the kernel change * partial fix for bug 2771: change default for root and add command for [ Bob Gilligan ] * Bugfix: 2879 [ Christopher LILJENSTOLPE ] * Fix 2965: IPv6 Interface information not shown in show interfaces [ Justin Fletcher ] * Follow log file through log rotation [ Mohit Mehta ] * Fix Bug 2707 Missing from Glendale * Fix Bug 2707 Missing from Glendale * Fix Bug 2707 Missing from Glendale * Fix Bug 2863 "show bridge" prompts for sudo password * Fix Bug 2707 Missing from Glendale [ Stephen Hemminger ] * add command to show end of log file * bridge status commands don't need sudo * no need for sudo to read log messages * use sysfs rather dmidecode to look at hardware information * remove root requirement * Use hardcoded path to ethtool * don't use sudo-users for ip commands * no longer need sudo-users links for commands * tech-support is a shell script * Add show license command * Update license from VPL 1.0 to GPLv2 * remove init-floppy * Fix this a different way. * Move init-floppy to /opt/vyatta/sbin * don't run commands in subshell * Need to run commands via eval * Better fix for interrupted shell commands problem. [ Stig Thormodsrud ] * Fix operator permissions for "clear arp" and "clear ip route cache". * Fix operator permissions for "clear interface counters" and "clear dhcp client process" * Add quotes to user entered parameters * Add quotes around user input [ rbalocca ] * Remove postrm from configure.ac, since it was deleted * Fix syntax error in control file + add a missing dependency: "less" [ Mark O'Brien ] -- Mark O'Brien Tue, 18 Mar 2008 19:05:07 -0700 vyatta-op (0.2) unstable; urgency=low vc4.0.0 [ Mark O'Brien ] [ An-Cheng Huang ] * fix for bug 2587: add "identify" command under "show interfaces ethernet". * bind '?' to "possible-completions" for help [ Bob Gilligan ] * Teach the vyatta-show-interfaces script about PPPOE interfaces. * Bugfix: 2634 * Bugfix: 2712 [ Mark O'Brien ] * Added "clear console" command to clear screen. [ Stephen Hemminger ] * running brctl doesn't need root privledges * no longer need sudo for ethtool * no need for sudo when using ethtool * remove usage of sudo in tech-support script * remove unneeded install steps * Revert "remove unneeded install steps" * Revert "remove usage of sudo in tech-support script" * Revert "no need for sudo when using ethtool" * Revert "no longer need sudo for ethtool" * Revert "running brctl doesn't need root privledges" [ Stig Thormodsrud ] * add 'show dhcp client leases' * fix 'show vrrp interface <>' * - Add "show ip route forward" * Change 'show dhcp client' to 'show dhcp client leases' * Add 'clear arp ' bug 2702 * Fix 2710: Missing hardware commands * - Fix bug 776: need "clear interface" command to clear counters * Add "clear dhcp client process". * Fix "show dhcp client leases" so that it will parse multiple name servers. * Change printf to use "u" instead of "d". Still need to handle 32 bit counter roll. * Handle 32 bit counter roll in "show interfaces". [ Tom Grennan ] * fix (or at least improve) bug 2519 [ Mark O'Brien ] -- Mark O'Brien Mon, 25 Feb 2008 17:39:32 -0800 vyatta-op (0.1) unstable; urgency=low * Initial Release. -- Tom Grennan Mon, 17 Sep 2007 15:29:15 -0700