| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Daniil Baturin <daniil@baturin.org>
|
|
Replacing with an updated patch.
This reverts commit 461db303287b4f838b68b120a9656c9fc31070b2.
|
|
Signed-off-by: Daniil Baturin <daniil@baturin.org>
|
|
vyatta@vyatta# run show wan-load-balance
Interface: eth0
Status: active
Last Status Change: Mon Sep 12 21:55:13 2011
-Test: ping Target: 8.8.8.8
+Test: ping Target: 10.3.0.120
Test: ping Target: 127.0.0.1
Last Interface Success: 0s
Last Interface Failure: n/a
# Interface Failure(s): 0
[edit]
vyatta@vyatta# run show wan-load-balance
Interface: eth0
Status: active
Last Status Change: Mon Sep 12 21:55:13 2011
+Test: ping Target: 8.8.8.8
Test: ping Target: 10.3.0.120
Test: ping Target: 127.0.0.1
Last Interface Success: 0s
Last Interface Failure: n/a
# Interface Failure(s): 0
- denotes failed test
+ denotes successful test
blank means the test wasn't performed
All test status' refer to the last test cycle.
|
|
Add the ability to run a user defined script to determine wan load-balancing interface health
includes sample http test (scripts/http_test.pl). Configuration will look as follows:
wan {
interface-health eth0 {
nexthop 10.3.0.1
test 1 {
test-script /tmp/http_test.pl
type user-defined
}
}
interface-health eth1 {
nexthop 10.3.0.1
test 1 {
test-script /tmp/http_test.pl
type user-defined
}
}
With corresponding output:
vyatta@vyatta# run show wan-load-balance
Interface: eth0
Status: active
Last Status Change: Wed Mar 30 19:03:59 2011
+Test: user Script: /tmp/http_test.pl
Last Interface Success: 0s
Last Interface Failure: n/a
# Interface Failure(s): 0
Interface: eth1
Status: failed
Last Status Change: Wed Mar 30 19:03:59 2011
-Test: user Script: /tmp/http_test.pl
Last Interface Success: n/a
Last Interface Failure: 0s
# Interface Failure(s): 52
Scripts returns 0 for success, non-zero for failure.
|
|
|
|
|
|
/var/load-balance. fix for bug 6630
(cherry picked from commit cf1754c28af9dc17f5dea4995049823dc7687a63)
|
|
|
|
|
|
|
|
remove policy route on shutdown.
|
|
* fix 64-bit problem: string::*find*() functions have return type of "size_t", not "unsigned int".
|
|
* fix 64-bit problem: string::find*() functions have return type of "size_t", not "uint32_t".
|
|
|
|
table.
|
|
table with adsl dhcp configuration:
http://www.vyatta.org/forum/viewtopic.php?t=4254
|
|
When checking policy route compare nexthop and interface rather then just checking for an entry. This allows for incorrect entries to be replaced. This would be
a problem if different nexthop is readvertised via dhcp to the interface.
|
|
into milliseconds, therefore without a configured test it is much more likely that a ping test
will fail.
the work-around is to configure a test (response time is not required as the default value of 5 seconds will be used at this point).
|
|
correctly when configured.
|
|
leak otherwise.
|
|
local) traffic when exclude rule is specified.
|
|
|
|
fix for bug 4675. Throttle back the initial setting of nat rules during startup of wlb.
Conflicts:
src/lbdecision.cc
|
|
"enable-local-traffic". This preserves previous behavior (i.e. no balancing of local traffic) by default, but can be enable
via the configuration node.
Conflicts:
scripts/vyatta-wanloadbalance.pl
src/lbdecision.cc
|
|
also supports additional command to disable balancing of locally sourced traffic
"disable-local-traffic"
Conflicts:
src/lbdecision.cc
|
|
|
|
inbound interface for wlb is the same as the packet outbound interface.
|
|
|
|
output.
|
|
|
|
target iteration where some targets never completed test cycle
|
|
|
|
source-based-policy applied
|
|
|
|
|
|
|
|
|
|
layout. modified op mode command to
provide indication on multiple target success/failures.
|
|
user can now specify a sequence of targets to test (ordered by rule number). The first success satifies the success
criteria for the test and no further tests will be performed on the interface for this period.
Additional test types can be coded and added to the target framework.
configuration has changed as a result of the rework.
|
|
startup of wlb.
Conflicts:
src/lbdecision.cc
|
|
|
|
receiving new address. in this case the new address is not recorded and we'll try creating the rule on the next processing cycle until successful.
|
|
changes in the location of the dhcp client information. this was also
fixed.
|
|
and output table scope. now tables are not flushed on removal.
|
|
configurable via conf mode. environment variables identify interface and new state.
|
|
|
|
global setting.
Conflicts:
src/lbdecision.cc
|
|
per comments in bug.
|
|
|
