suricata: T751: Initial support for suricata

9 files changed, 1779 insertions, 1 deletions

diff --git a/data/templates/ids/suricata.j2 b/data/templates/ids/suricata.j2
new file mode 100644
index 000000000..1bd90b67f
--- /dev/null
+++ b/data/templates/ids/suricata.j2
@@ -0,0 +1,1280 @@
+%YAML 1.1
+---
+
+# Suricata configuration file. In addition to the comments describing all
+# options in this file, full documentation can be found at:
+# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html
+#
+# This configuration file generated by:
+#     Suricata 6.0.10
+
+##
+## Step 1: Inform Suricata about your network
+##
+
+vars:
+  # more specific is better for alert accuracy and performance
+  address-groups:
+{% for (name, value) in suricata['address-group'] %}
+    {{ name }}: "[{{ value | join(',') }}]"
+{% endfor %}
+
+  port-groups:
+{% for (name, value) in suricata['port-group'] %}
+    {{ name }}: "[{{ value | join(',') }}]"
+{% endfor %}
+
+##
+## Step 2: Select outputs to enable
+##
+
+# The default logging directory.  Any log or output file will be
+# placed here if it's not specified with a full path name. This can be
+# overridden with the -l command line parameter.
+default-log-dir: /var/log/suricata/
+
+# Configure the type of alert (and other) logging you would like.
+{% if suricata.log is vyos_defined %}
+outputs:
+{%     if suricata.log.eve is vyos_defined %}
+  # Extensible Event Format (nicknamed EVE) event log in JSON format
+  - eve-log:
+      enabled: yes
+      filetype: {{ suricata.log.eve.filetype }} #regular|syslog|unix_dgram|unix_stream|redis
+      filename: {{ suricata.log.eve.filename }}
+
+      types:
+{%         if suricata.log.eve.type is not vyos_defined or "alert" in suricata.log.eve.type %}
+        - alert:
+            tagged-packets: yes
+{%         endif %}
+{%         if "http" in suricata.log.eve.type %}
+        - http:
+            enabled: yes
+            extended: yes
+{%         endif %}
+{%         if "tls" in suricata.log.eve.type %}
+        - tls:
+            enabled: yes
+            extended: yes     # enable this for extended logging information
+{%         endif %}
+{%         for protocol in suricata.log.eve.type %}
+{%             if protocol not in ["alert","http","tls"] %}
+        - {{ protocol }}:
+            enabled: yes
+{%             endif %}
+{%         endfor %}
+{%     endif %}
+{% endif %}
+
+##
+## Step 3: Configure common capture settings
+##
+## See "Advanced Capture Options" below for more options, including Netmap
+## and PF_RING.
+##
+
+# Linux high speed capture support
+af-packet:
+{% for interface in suricata.interface %}
+  - interface: {{ interface }}
+    # Default clusterid. AF_PACKET will load balance packets based on flow.
+    cluster-id: 99
+    # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
+    # This is only supported for Linux kernel > 3.1
+    # possible value are:
+    #  * cluster_flow: all packets of a given flow are sent to the same socket
+    #  * cluster_cpu: all packets treated in kernel by a CPU are sent to the same socket
+    #  * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
+    #  socket. Requires at least Linux 3.14.
+    #  * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for
+    #  more info.
+    # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
+    # with capture card using RSS (requires cpu affinity tuning and system IRQ tuning)
+    cluster-type: cluster_flow
+    # In some fragmentation cases, the hash can not be computed. If "defrag" is set
+    # to yes, the kernel will do the needed defragmentation before sending the packets.
+    defrag: yes
+{% endfor %}
+
+# Cross platform libpcap capture support
+pcap:
+{% for interface in suricata.interface %}
+  - interface: {{ interface }}
+{% endfor %}
+
+# Settings for reading pcap files
+pcap-file:
+  # Possible values are:
+  #  - yes: checksum validation is forced
+  #  - no: checksum validation is disabled
+  #  - auto: Suricata uses a statistical approach to detect when
+  #  checksum off-loading is used. (default)
+  # Warning: 'checksum-validation' must be set to yes to have checksum tested
+  checksum-checks: auto
+
+# See "Advanced Capture Options" below for more options, including Netmap
+# and PF_RING.
+
+
+##
+## Step 4: App Layer Protocol configuration
+##
+
+# Configure the app-layer parsers.
+#
+# The error-policy setting applies to all app-layer parsers. Values can be
+# "drop-flow", "pass-flow", "bypass", "drop-packet", "pass-packet", "reject" or
+# "ignore" (the default).
+#
+# The protocol's section details each protocol.
+#
+# The option "enabled" takes 3 values - "yes", "no", "detection-only".
+# "yes" enables both detection and the parser, "no" disables both, and
+# "detection-only" enables protocol detection only (parser disabled).
+app-layer:
+  # error-policy: ignore
+  protocols:
+    rfb:
+      enabled: yes
+      detection-ports:
+        dp: 5900, 5901, 5902, 5903, 5904, 5905, 5906, 5907, 5908, 5909
+    # MQTT, disabled by default.
+    mqtt:
+      enabled: yes
+      # max-msg-length: 1mb
+      # subscribe-topic-match-limit: 100
+      # unsubscribe-topic-match-limit: 100
+      # Maximum number of live MQTT transactions per flow
+      # max-tx: 4096
+    krb5:
+      enabled: yes
+    snmp:
+      enabled: yes
+    ikev2:
+      enabled: yes
+    tls:
+      enabled: yes
+      detection-ports:
+        dp: 443
+
+      # Generate JA3 fingerprint from client hello. If not specified it
+      # will be disabled by default, but enabled if rules require it.
+      #ja3-fingerprints: auto
+
+      # What to do when the encrypted communications start:
+      # - default: keep tracking TLS session, check for protocol anomalies,
+      #            inspect tls_* keywords. Disables inspection of unmodified
+      #            'content' signatures.
+      # - bypass:  stop processing this flow as much as possible. No further
+      #            TLS parsing and inspection. Offload flow bypass to kernel
+      #            or hardware if possible.
+      # - full:    keep tracking and inspection as normal. Unmodified content
+      #            keyword signatures are inspected as well.
+      #
+      # For best performance, select 'bypass'.
+      #
+      #encryption-handling: default
+
+    dcerpc:
+      enabled: yes
+    ftp:
+      enabled: yes
+      # memcap: 64mb
+    rdp:
+      enabled: yes
+    ssh:
+      enabled: yes
+      #hassh: yes
+    # HTTP2: Experimental HTTP 2 support. Disabled by default.
+    http2:
+      enabled: no
+      # use http keywords on HTTP2 traffic
+      http1-rules: no
+    smtp:
+      enabled: yes
+      raw-extraction: no
+      # Configure SMTP-MIME Decoder
+      mime:
+        # Decode MIME messages from SMTP transactions
+        # (may be resource intensive)
+        # This field supersedes all others because it turns the entire
+        # process on or off
+        decode-mime: yes
+
+        # Decode MIME entity bodies (ie. Base64, quoted-printable, etc.)
+        decode-base64: yes
+        decode-quoted-printable: yes
+
+        # Maximum bytes per header data value stored in the data structure
+        # (default is 2000)
+        header-value-depth: 2000
+
+        # Extract URLs and save in state data structure
+        extract-urls: yes
+        # Set to yes to compute the md5 of the mail body. You will then
+        # be able to journalize it.
+        body-md5: no
+      # Configure inspected-tracker for file_data keyword
+      inspected-tracker:
+        content-limit: 100000
+        content-inspect-min-size: 32768
+        content-inspect-window: 4096
+    imap:
+      enabled: detection-only
+    smb:
+      enabled: yes
+      detection-ports:
+        dp: 139, 445
+
+      # Stream reassembly size for SMB streams. By default track it completely.
+      #stream-depth: 0
+
+    nfs:
+      enabled: yes
+    tftp:
+      enabled: yes
+    dns:
+      tcp:
+        enabled: yes
+        detection-ports:
+          dp: 53
+      udp:
+        enabled: yes
+        detection-ports:
+          dp: 53
+    http:
+      enabled: yes
+      # memcap:                   Maximum memory capacity for HTTP
+      #                           Default is unlimited, values can be 64mb, e.g.
+
+      # default-config:           Used when no server-config matches
+      #   personality:            List of personalities used by default
+      #   request-body-limit:     Limit reassembly of request body for inspection
+      #                           by http_client_body & pcre /P option.
+      #   response-body-limit:    Limit reassembly of response body for inspection
+      #                           by file_data, http_server_body & pcre /Q option.
+      #
+      #   For advanced options, see the user guide
+
+
+      # server-config:            List of server configurations to use if address matches
+      #   address:                List of IP addresses or networks for this block
+      #   personality:            List of personalities used by this block
+      #
+      #                           Then, all the fields from default-config can be overloaded
+      #
+      # Currently Available Personalities:
+      #   Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
+      #   IIS_7_0, IIS_7_5, Apache_2
+      libhtp:
+         default-config:
+           personality: IDS
+
+           # Can be specified in kb, mb, gb.  Just a number indicates
+           # it's in bytes.
+           request-body-limit: 100kb
+           response-body-limit: 100kb
+
+           # inspection limits
+           request-body-minimal-inspect-size: 32kb
+           request-body-inspect-window: 4kb
+           response-body-minimal-inspect-size: 40kb
+           response-body-inspect-window: 16kb
+
+           # response body decompression (0 disables)
+           response-body-decompress-layer-limit: 2
+
+           # auto will use http-body-inline mode in IPS mode, yes or no set it statically
+           http-body-inline: auto
+
+           # Decompress SWF files.
+           # Two types: 'deflate', 'lzma', 'both' will decompress deflate and lzma
+           # compress-depth:
+           # Specifies the maximum amount of data to decompress,
+           # set 0 for unlimited.
+           # decompress-depth:
+           # Specifies the maximum amount of decompressed data to obtain,
+           # set 0 for unlimited.
+           swf-decompression:
+             enabled: yes
+             type: both
+             compress-depth: 100kb
+             decompress-depth: 100kb
+
+           # Use a random value for inspection sizes around the specified value.
+           # This lowers the risk of some evasion techniques but could lead
+           # to detection change between runs. It is set to 'yes' by default.
+           #randomize-inspection-sizes: yes
+           # If "randomize-inspection-sizes" is active, the value of various
+           # inspection size will be chosen from the [1 - range%, 1 + range%]
+           # range
+           # Default value of "randomize-inspection-range" is 10.
+           #randomize-inspection-range: 10
+
+           # decoding
+           double-decode-path: no
+           double-decode-query: no
+
+           # Can enable LZMA decompression
+           #lzma-enabled: false
+           # Memory limit usage for LZMA decompression dictionary
+           # Data is decompressed until dictionary reaches this size
+           #lzma-memlimit: 1mb
+           # Maximum decompressed size with a compression ratio
+           # above 2048 (only LZMA can reach this ratio, deflate cannot)
+           #compression-bomb-limit: 1mb
+           # Maximum time spent decompressing a single transaction in usec
+           #decompression-time-limit: 100000
+
+         server-config:
+
+           #- apache:
+           #    address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
+           #    personality: Apache_2
+           #    # Can be specified in kb, mb, gb.  Just a number indicates
+           #    # it's in bytes.
+           #    request-body-limit: 4096
+           #    response-body-limit: 4096
+           #    double-decode-path: no
+           #    double-decode-query: no
+
+           #- iis7:
+           #    address:
+           #      - 192.168.0.0/24
+           #      - 192.168.10.0/24
+           #    personality: IIS_7_0
+           #    # Can be specified in kb, mb, gb.  Just a number indicates
+           #    # it's in bytes.
+           #    request-body-limit: 4096
+           #    response-body-limit: 4096
+           #    double-decode-path: no
+           #    double-decode-query: no
+
+    # Note: Modbus probe parser is minimalist due to the limited usage in the field.
+    # Only Modbus message length (greater than Modbus header length)
+    # and protocol ID (equal to 0) are checked in probing parser
+    # It is important to enable detection port and define Modbus port
+    # to avoid false positives
+    modbus:
+      # How many unanswered Modbus requests are considered a flood.
+      # If the limit is reached, the app-layer-event:modbus.flooded; will match.
+      #request-flood: 500
+
+      enabled: no
+      detection-ports:
+        dp: 502
+      # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
+      # is recommended to keep the TCP connection opened with a remote device
+      # and not to open and close it for each MODBUS/TCP transaction. In that
+      # case, it is important to set the depth of the stream reassembling as
+      # unlimited (stream.reassembly.depth: 0)
+
+      # Stream reassembly size for modbus. By default track it completely.
+      stream-depth: 0
+
+    # DNP3
+    dnp3:
+      enabled: no
+      detection-ports:
+        dp: 20000
+
+    # SCADA EtherNet/IP and CIP protocol support
+    enip:
+      enabled: no
+      detection-ports:
+        dp: 44818
+        sp: 44818
+
+    ntp:
+      enabled: yes
+
+    dhcp:
+      enabled: yes
+
+    sip:
+      enabled: yes
+
+# Limit for the maximum number of asn1 frames to decode (default 256)
+asn1-max-frames: 256
+
+# Datasets default settings
+# datasets:
+#   # Default fallback memcap and hashsize values for datasets in case these
+#   # were not explicitly defined.
+#   defaults:
+#     memcap: 100mb
+#     hashsize: 2048
+
+##############################################################################
+##
+## Advanced settings below
+##
+##############################################################################
+
+##
+## Run Options
+##
+
+# Run Suricata with a specific user-id and group-id:
+#run-as:
+#  user: suri
+#  group: suri
+
+# Some logging modules will use that name in event as identifier. The default
+# value is the hostname
+#sensor-name: suricata
+
+# Default location of the pid file. The pid file is only used in
+# daemon mode (start Suricata with -D). If not running in daemon mode
+# the --pidfile command line option must be used to create a pid file.
+#pid-file: /var/run/suricata.pid
+
+# Daemon working directory
+# Suricata will change directory to this one if provided
+# Default: "/"
+#daemon-directory: "/"
+
+# Umask.
+# Suricata will use this umask if it is provided. By default it will use the
+# umask passed on by the shell.
+#umask: 022
+
+# Suricata core dump configuration. Limits the size of the core dump file to
+# approximately max-dump. The actual core dump size will be a multiple of the
+# page size. Core dumps that would be larger than max-dump are truncated. On
+# Linux, the actual core dump size may be a few pages larger than max-dump.
+# Setting max-dump to 0 disables core dumping.
+# Setting max-dump to 'unlimited' will give the full core dump file.
+# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
+# to be 'unlimited'.
+
+coredump:
+  max-dump: unlimited
+
+# If the Suricata box is a router for the sniffed networks, set it to 'router'. If
+# it is a pure sniffing setup, set it to 'sniffer-only'.
+# If set to auto, the variable is internally switched to 'router' in IPS mode
+# and 'sniffer-only' in IDS mode.
+# This feature is currently only used by the reject* keywords.
+host-mode: auto
+
+# Number of packets preallocated per thread. The default is 1024. A higher number
+# will make sure each CPU will be more easily kept busy, but may negatively
+# impact caching.
+#max-pending-packets: 1024
+
+# Runmode the engine should use. Please check --list-runmodes to get the available
+# runmodes for each packet acquisition method. Default depends on selected capture
+# method. 'workers' generally gives best performance.
+#runmode: autofp
+
+# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
+#
+# Supported schedulers are:
+#
+# hash     - Flow assigned to threads using the 5-7 tuple hash.
+# ippair   - Flow assigned to threads using addresses only.
+#
+#autofp-scheduler: hash
+
+# Preallocated size for each packet. Default is 1514 which is the classical
+# size for pcap on Ethernet. You should adjust this value to the highest
+# packet size (MTU + hardware header) on your system.
+#default-packet-size: 1514
+
+# Unix command socket that can be used to pass commands to Suricata.
+# An external tool can then connect to get information from Suricata
+# or trigger some modifications of the engine. Set enabled to yes
+# to activate the feature. In auto mode, the feature will only be
+# activated in live capture mode. You can use the filename variable to set
+# the file name of the socket.
+unix-command:
+  enabled: yes
+  filename: /run/suricata/suricata.socket
+
+# Magic file. The extension .mgc is added to the value here.
+#magic-file: /usr/share/file/magic
+#magic-file:
+
+# GeoIP2 database file. Specify path and filename of GeoIP2 database
+# if using rules with "geoip" rule option.
+#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb
+
+legacy:
+  uricontent: enabled
+
+##
+## Detection settings
+##
+
+# Set the order of alerts based on actions
+# The default order is pass, drop, reject, alert
+# action-order:
+#   - pass
+#   - drop
+#   - reject
+#   - alert
+
+# Define maximum number of possible alerts that can be triggered for the same
+# packet. Default is 15
+#packet-alert-max: 15
+
+# IP Reputation
+#reputation-categories-file: /etc/suricata/iprep/categories.txt
+#default-reputation-path: /etc/suricata/iprep
+#reputation-files:
+# - reputation.list
+
+# When run with the option --engine-analysis, the engine will read each of
+# the parameters below, and print reports for each of the enabled sections
+# and exit.  The reports are printed to a file in the default log dir
+# given by the parameter "default-log-dir", with engine reporting
+# subsection below printing reports in its own report file.
+engine-analysis:
+  # enables printing reports for fast-pattern for every rule.
+  rules-fast-pattern: yes
+  # enables printing reports for each rule
+  rules: yes
+
+#recursion and match limits for PCRE where supported
+pcre:
+  match-limit: 3500
+  match-limit-recursion: 1500
+
+##
+## Advanced Traffic Tracking and Reconstruction Settings
+##
+
+# Host specific policies for defragmentation and TCP stream
+# reassembly. The host OS lookup is done using a radix tree, just
+# like a routing table so the most specific entry matches.
+host-os-policy:
+  # Make the default policy windows.
+  windows: [0.0.0.0/0]
+  bsd: []
+  bsd-right: []
+  old-linux: []
+  linux: []
+  old-solaris: []
+  solaris: []
+  hpux10: []
+  hpux11: []
+  irix: []
+  macos: []
+  vista: []
+  windows2k3: []
+
+# Defrag settings:
+
+# The memcap-policy value can be "drop-flow", "pass-flow", "bypass",
+# "drop-packet", "pass-packet", "reject" or "ignore" (which is the default).
+defrag:
+  memcap: 32mb
+  # memcap-policy: ignore
+  hash-size: 65536
+  trackers: 65535 # number of defragmented flows to follow
+  max-frags: 65535 # number of fragments to keep (higher than trackers)
+  prealloc: yes
+  timeout: 60
+
+# Enable defrag per host settings
+#  host-config:
+#
+#    - dmz:
+#        timeout: 30
+#        address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
+#
+#    - lan:
+#        timeout: 45
+#        address:
+#          - 192.168.0.0/24
+#          - 192.168.10.0/24
+#          - 172.16.14.0/24
+
+# Flow settings:
+# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
+# for flow allocation inside the engine. You can change this value to allow
+# more memory usage for flows.
+# The hash-size determines the size of the hash used to identify flows inside
+# the engine, and by default the value is 65536.
+# At startup, the engine can preallocate a number of flows, to get better
+# performance. The number of flows preallocated is 10000 by default.
+# emergency-recovery is the percentage of flows that the engine needs to
+# prune before clearing the emergency state. The emergency state is activated
+# when the memcap limit is reached, allowing new flows to be created, but
+# pruning them with the emergency timeouts (they are defined below).
+# If the memcap is reached, the engine will try to prune flows
+# with the default timeouts. If it doesn't find a flow to prune, it will set
+# the emergency bit and it will try again with more aggressive timeouts.
+# If that doesn't work, then it will try to kill the oldest flows using
+# last time seen flows.
+# The memcap can be specified in kb, mb, gb.  Just a number indicates it's
+# in bytes.
+# The memcap-policy can be "drop-flow", "pass-flow", "bypass", "drop-packet",
+# "pass-packet", "reject" or "ignore" (which is the default).
+
+flow:
+  memcap: 128mb
+  #memcap-policy: ignore
+  hash-size: 65536
+  prealloc: 10000
+  emergency-recovery: 30
+  #managers: 1 # default to one flow manager
+  #recyclers: 1 # default to one flow recycler thread
+
+# This option controls the use of VLAN ids in the flow (and defrag)
+# hashing. Normally this should be enabled, but in some (broken)
+# setups where both sides of a flow are not tagged with the same VLAN
+# tag, we can ignore the VLAN id's in the flow hashing.
+vlan:
+  use-for-tracking: true
+
+# Specific timeouts for flows. Here you can specify the timeouts that the
+# active flows will wait to transit from the current state to another, on each
+# protocol. The value of "new" determines the seconds to wait after a handshake or
+# stream startup before the engine frees the data of that flow it doesn't
+# change the state to established (usually if we don't receive more packets
+# of that flow). The value of "established" is the amount of
+# seconds that the engine will wait to free the flow if that time elapses
+# without receiving new packets or closing the connection. "closed" is the
+# amount of time to wait after a flow is closed (usually zero). "bypassed"
+# timeout controls locally bypassed flows. For these flows we don't do any other
+# tracking. If no packets have been seen after this timeout, the flow is discarded.
+#
+# There's an emergency mode that will become active under attack circumstances,
+# making the engine to check flow status faster. This configuration variables
+# use the prefix "emergency-" and work similar as the normal ones.
+# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
+# icmp.
+
+flow-timeouts:
+
+  default:
+    new: 30
+    established: 300
+    closed: 0
+    bypassed: 100
+    emergency-new: 10
+    emergency-established: 100
+    emergency-closed: 0
+    emergency-bypassed: 50
+  tcp:
+    new: 60
+    established: 600
+    closed: 60
+    bypassed: 100
+    emergency-new: 5
+    emergency-established: 100
+    emergency-closed: 10
+    emergency-bypassed: 50
+  udp:
+    new: 30
+    established: 300
+    bypassed: 100
+    emergency-new: 10
+    emergency-established: 100
+    emergency-bypassed: 50
+  icmp:
+    new: 30
+    established: 300
+    bypassed: 100
+    emergency-new: 10
+    emergency-established: 100
+    emergency-bypassed: 50
+
+# Stream engine settings. Here the TCP stream tracking and reassembly
+# engine is configured.
+#
+# stream:
+#   memcap: 64mb                # Can be specified in kb, mb, gb.  Just a
+#                               # number indicates it's in bytes.
+#   memcap-policy: ignore       # Can be "drop-flow", "pass-flow", "bypass",
+#                               # "drop-packet", "pass-packet", "reject" or
+#                               # "ignore" default is "ignore"
+#   checksum-validation: yes    # To validate the checksum of received
+#                               # packet. If csum validation is specified as
+#                               # "yes", then packets with invalid csum values will not
+#                               # be processed by the engine stream/app layer.
+#                               # Warning: locally generated traffic can be
+#                               # generated without checksum due to hardware offload
+#                               # of checksum. You can control the handling of checksum
+#                               # on a per-interface basis via the 'checksum-checks'
+#                               # option
+#   prealloc-sessions: 2k       # 2k sessions prealloc'd per stream thread
+#   midstream: false            # don't allow midstream session pickups
+#   midstream-policy: ignore    # Can be "drop-flow", "pass-flow", "bypass",
+#                               # "drop-packet", "pass-packet", "reject" or
+#                               # "ignore" default is "ignore"
+#   async-oneside: false        # don't enable async stream handling
+#   inline: no                  # stream inline mode
+#   drop-invalid: yes           # in inline mode, drop packets that are invalid with regards to streaming engine
+#   max-synack-queued: 5        # Max different SYN/ACKs to queue
+#   bypass: no                  # Bypass packets when stream.reassembly.depth is reached.
+#                               # Warning: first side to reach this triggers
+#                               # the bypass.
+#
+#   reassembly:
+#     memcap: 256mb             # Can be specified in kb, mb, gb.  Just a number
+#                               # indicates it's in bytes.
+#     memcap-policy: ignore     # Can be "drop-flow", "pass-flow", "bypass",
+#                               # "drop-packet", "pass-packet", "reject" or
+#                               # "ignore" default is "ignore"
+#     depth: 1mb                # Can be specified in kb, mb, gb.  Just a number
+#                               # indicates it's in bytes.
+#     toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
+#                               # this size.  Can be specified in kb, mb,
+#                               # gb.  Just a number indicates it's in bytes.
+#     toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
+#                               # this size.  Can be specified in kb, mb,
+#                               # gb.  Just a number indicates it's in bytes.
+#     randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
+#                               # This lowers the risk of some evasion techniques but could lead
+#                               # to detection change between runs. It is set to 'yes' by default.
+#     randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
+#                               # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
+#                               # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
+#                               # calculation for toclient-chunk-size.
+#                               # Default value of randomize-chunk-range is 10.
+#
+#     raw: yes                  # 'Raw' reassembly enabled or disabled.
+#                               # raw is for content inspection by detection
+#                               # engine.
+#
+#     segment-prealloc: 2048    # number of segments preallocated per thread
+#
+#     check-overlap-different-data: true|false
+#                               # check if a segment contains different data
+#                               # than what we've already seen for that
+#                               # position in the stream.
+#                               # This is enabled automatically if inline mode
+#                               # is used or when stream-event:reassembly_overlap_different_data;
+#                               # is used in a rule.
+#
+stream:
+  memcap: 64mb
+  #memcap-policy: ignore
+  checksum-validation: yes      # reject incorrect csums
+  #midstream: false
+  #midstream-policy: ignore
+  inline: auto                  # auto will use inline mode in IPS mode, yes or no set it statically
+  reassembly:
+    memcap: 256mb
+    #memcap-policy: ignore
+    depth: 1mb                  # reassemble 1mb into a stream
+    toserver-chunk-size: 2560
+    toclient-chunk-size: 2560
+    randomize-chunk-size: yes
+    #randomize-chunk-range: 10
+    #raw: yes
+    #segment-prealloc: 2048
+    #check-overlap-different-data: true
+
+# Host table:
+#
+# Host table is used by the tagging and per host thresholding subsystems.
+#
+host:
+  hash-size: 4096
+  prealloc: 1000
+  memcap: 32mb
+
+# IP Pair table:
+#
+# Used by xbits 'ippair' tracking.
+#
+#ippair:
+#  hash-size: 4096
+#  prealloc: 1000
+#  memcap: 32mb
+
+# Decoder settings
+
+decoder:
+  # Teredo decoder is known to not be completely accurate
+  # as it will sometimes detect non-teredo as teredo.
+  teredo:
+    enabled: true
+    # ports to look for Teredo. Max 4 ports. If no ports are given, or
+    # the value is set to 'any', Teredo detection runs on _all_ UDP packets.
+    ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'.
+
+  # VXLAN decoder is assigned to up to 4 UDP ports. By default only the
+  # IANA assigned port 4789 is enabled.
+  vxlan:
+    enabled: true
+    ports: $VXLAN_PORTS # syntax: '[8472, 4789]' or '4789'.
+
+  # VNTag decode support
+  vntag:
+    enabled: false
+
+  # Geneve decoder is assigned to up to 4 UDP ports. By default only the
+  # IANA assigned port 6081 is enabled.
+  geneve:
+    enabled: true
+    ports: $GENEVE_PORTS # syntax: '[6081, 1234]' or '6081'.
+
+  # maximum number of decoder layers for a packet
+  # max-layers: 16
+
+##
+## Performance tuning and profiling
+##
+
+# The detection engine builds internal groups of signatures. The engine
+# allows us to specify the profile to use for them, to manage memory in an
+# efficient way keeping good performance. For the profile keyword you
+# can use the words "low", "medium", "high" or "custom". If you use custom,
+# make sure to define the values in the "custom-values" section.
+# Usually you would prefer medium/high/low.
+#
+# "sgh mpm-context", indicates how the staging should allot mpm contexts for
+# the signature groups.  "single" indicates the use of a single context for
+# all the signature group heads.  "full" indicates a mpm-context for each
+# group head.  "auto" lets the engine decide the distribution of contexts
+# based on the information the engine gathers on the patterns from each
+# group head.
+#
+# The option inspection-recursion-limit is used to limit the recursive calls
+# in the content inspection code.  For certain payload-sig combinations, we
+# might end up taking too much time in the content inspection code.
+# If the argument specified is 0, the engine uses an internally defined
+# default limit.  When a value is not specified, there are no limits on the recursion.
+detect:
+  profile: medium
+  custom-values:
+    toclient-groups: 3
+    toserver-groups: 25
+  sgh-mpm-context: auto
+  inspection-recursion-limit: 3000
+  # If set to yes, the loading of signatures will be made after the capture
+  # is started. This will limit the downtime in IPS mode.
+  #delayed-detect: yes
+
+  prefilter:
+    # default prefiltering setting. "mpm" only creates MPM/fast_pattern
+    # engines. "auto" also sets up prefilter engines for other keywords.
+    # Use --list-keywords=all to see which keywords support prefiltering.
+    default: mpm
+
+  # the grouping values above control how many groups are created per
+  # direction. Port whitelisting forces that port to get its own group.
+  # Very common ports will benefit, as well as ports with many expensive
+  # rules.
+  grouping:
+    #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
+    #udp-whitelist: 53, 135, 5060
+
+  profiling:
+    # Log the rules that made it past the prefilter stage, per packet
+    # default is off. The threshold setting determines how many rules
+    # must have made it past pre-filter for that rule to trigger the
+    # logging.
+    #inspect-logging-threshold: 200
+    grouping:
+      dump-to-disk: false
+      include-rules: false      # very verbose
+      include-mpm-stats: false
+
+# Select the multi pattern algorithm you want to run for scan/search the
+# in the engine.
+#
+# The supported algorithms are:
+# "ac"      - Aho-Corasick, default implementation
+# "ac-bs"   - Aho-Corasick, reduced memory implementation
+# "ac-ks"   - Aho-Corasick, "Ken Steele" variant
+# "hs"      - Hyperscan, available when built with Hyperscan support
+#
+# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
+# available, "ac" otherwise.
+#
+# The mpm you choose also decides the distribution of mpm contexts for
+# signature groups, specified by the conf - "detect.sgh-mpm-context".
+# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
+# to be set to "single", because of ac's memory requirements, unless the
+# ruleset is small enough to fit in memory, in which case one can
+# use "full" with "ac".  The rest of the mpms can be run in "full" mode.
+
+mpm-algo: auto
+
+# Select the matching algorithm you want to use for single-pattern searches.
+#
+# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
+# available if Suricata has been built with Hyperscan support).
+#
+# The default of "auto" will use "hs" if available, otherwise "bm".
+
+spm-algo: auto
+
+# Suricata is multi-threaded. Here the threading can be influenced.
+threading:
+  set-cpu-affinity: no
+  # Tune cpu affinity of threads. Each family of threads can be bound
+  # to specific CPUs.
+  #
+  # These 2 apply to the all runmodes:
+  # management-cpu-set is used for flow timeout handling, counters
+  # worker-cpu-set is used for 'worker' threads
+  #
+  # Additionally, for autofp these apply:
+  # receive-cpu-set is used for capture threads
+  # verdict-cpu-set is used for IPS verdict threads
+  #
+  cpu-affinity:
+    - management-cpu-set:
+        cpu: [ 0 ]  # include only these CPUs in affinity settings
+    - receive-cpu-set:
+        cpu: [ 0 ]  # include only these CPUs in affinity settings
+    - worker-cpu-set:
+        cpu: [ "all" ]
+        mode: "exclusive"
+        # Use explicitly 3 threads and don't compute number by using
+        # detect-thread-ratio variable:
+        # threads: 3
+        prio:
+          low: [ 0 ]
+          medium: [ "1-2" ]
+          high: [ 3 ]
+          default: "medium"
+    #- verdict-cpu-set:
+    #    cpu: [ 0 ]
+    #    prio:
+    #      default: "high"
+  #
+  # By default Suricata creates one "detect" thread per available CPU/CPU core.
+  # This setting allows controlling this behaviour. A ratio setting of 2 will
+  # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
+  # will result in 4 detect threads. If values below 1 are used, less threads
+  # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
+  # thread being created. Regardless of the setting at a minimum 1 detect
+  # thread will always be created.
+  #
+  detect-thread-ratio: 1.0
+  #
+  # By default, the per-thread stack size is left to its default setting. If
+  # the default thread stack size is too small, use the following configuration
+  # setting to change the size. Note that if any thread's stack size cannot be
+  # set to this value, a fatal error occurs.
+  #
+  # Generally, the per-thread stack-size should not exceed 8MB.
+  #stack-size: 8mb
+
+# Luajit has a strange memory requirement, its 'states' need to be in the
+# first 2G of the process' memory.
+#
+# 'luajit.states' is used to control how many states are preallocated.
+# State use: per detect script: 1 per detect thread. Per output script: 1 per
+# script.
+luajit:
+  states: 128
+
+# Profiling settings. Only effective if Suricata has been built with
+# the --enable-profiling configure flag.
+#
+profiling:
+  # Run profiling for every X-th packet. The default is 1, which means we
+  # profile every packet. If set to 1000, one packet is profiled for every
+  # 1000 received.
+  #sample-rate: 1000
+
+  # rule profiling
+  rules:
+
+    # Profiling can be disabled here, but it will still have a
+    # performance impact if compiled in.
+    enabled: yes
+    filename: rule_perf.log
+    append: yes
+
+    # Sort options: ticks, avgticks, checks, matches, maxticks
+    # If commented out all the sort options will be used.
+    #sort: avgticks
+
+    # Limit the number of sids for which stats are shown at exit (per sort).
+    limit: 10
+
+    # output to json
+    json: yes
+
+  # per keyword profiling
+  keywords:
+    enabled: yes
+    filename: keyword_perf.log
+    append: yes
+
+  prefilter:
+    enabled: yes
+    filename: prefilter_perf.log
+    append: yes
+
+  # per rulegroup profiling
+  rulegroups:
+    enabled: yes
+    filename: rule_group_perf.log
+    append: yes
+
+  # packet profiling
+  packets:
+
+    # Profiling can be disabled here, but it will still have a
+    # performance impact if compiled in.
+    enabled: yes
+    filename: packet_stats.log
+    append: yes
+
+    # per packet csv output
+    csv:
+
+      # Output can be disabled here, but it will still have a
+      # performance impact if compiled in.
+      enabled: no
+      filename: packet_stats.csv
+
+  # profiling of locking. Only available when Suricata was built with
+  # --enable-profiling-locks.
+  locks:
+    enabled: no
+    filename: lock_stats.log
+    append: yes
+
+  pcap-log:
+    enabled: no
+    filename: pcaplog_stats.log
+    append: yes
+
+##
+## Netfilter integration
+##
+
+# When running in NFQ inline mode, it is possible to use a simulated
+# non-terminal NFQUEUE verdict.
+# This permits sending all needed packet to Suricata via this rule:
+#        iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
+# And below, you can have your standard filtering ruleset. To activate
+# this mode, you need to set mode to 'repeat'
+# If you want a packet to be sent to another queue after an ACCEPT decision
+# set the mode to 'route' and set next-queue value.
+# On Linux >= 3.1, you can set batchcount to a value > 1 to improve performance
+# by processing several packets before sending a verdict (worker runmode only).
+# On Linux >= 3.6, you can set the fail-open option to yes to have the kernel
+# accept the packet if Suricata is not able to keep pace.
+# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
+# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
+# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
+# directly accept all packets of a flow once a packet has been marked.
+nfq:
+#  mode: accept
+#  repeat-mark: 1
+#  repeat-mask: 1
+#  bypass-mark: 1
+#  bypass-mask: 1
+#  route-queue: 2
+#  batchcount: 20
+#  fail-open: yes
+
+#nflog support
+nflog:
+    # netlink multicast group
+    # (the same as the iptables --nflog-group param)
+    # Group 0 is used by the kernel, so you can't use it
+  - group: 2
+    # netlink buffer size
+    buffer-size: 18432
+    # put default value here
+  - group: default
+    # set number of packets to queue inside kernel
+    qthreshold: 1
+    # set the delay before flushing packet in the kernel's queue
+    qtimeout: 100
+    # netlink max buffer size
+    max-size: 20000
+
+##
+## Advanced Capture Options
+##
+
+# General settings affecting packet capture
+capture:
+  # disable NIC offloading. It's restored when Suricata exits.
+  # Enabled by default.
+  #disable-offloading: false
+  #
+  # disable checksum validation. Same as setting '-k none' on the
+  # commandline.
+  #checksum-validation: none
+
+# Netmap support
+#
+# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which has
+# built-in Netmap support or compile and install the Netmap module and appropriate
+# NIC driver for your Linux system.
+# To reach maximum throughput disable all receive-, segmentation-,
+# checksum- offloading on your NIC (using ethtool or similar).
+# Disabling TX checksum offloading is *required* for connecting OS endpoint
+# with NIC endpoint.
+# You can find more information at https://github.com/luigirizzo/netmap
+#
+netmap:
+ - interface: default
+
+# PF_RING configuration: for use with native PF_RING support
+# for more info see http://www.ntop.org/products/pf_ring/
+pfring:
+  - interface: default
+    #threads: 2
+
+# For FreeBSD ipfw(8) divert(4) support.
+# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
+# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
+# Additionally, you need to have an ipfw rule for the engine to see
+# the packets from ipfw.  For Example:
+#
+#   ipfw add 100 divert 8000 ip from any to any
+#
+# N.B. This example uses "8000" -- this number must mach the values
+# you passed on the command line, i.e., -d 8000
+#
+ipfw:
+
+  # Reinject packets at the specified ipfw rule number.  This config
+  # option is the ipfw rule number AT WHICH rule processing continues
+  # in the ipfw processing system after the engine has finished
+  # inspecting the packet for acceptance.  If no rule number is specified,
+  # accepted packets are reinjected at the divert rule which they entered
+  # and IPFW rule processing continues.  No check is done to verify
+  # this will rule makes sense so care must be taken to avoid loops in ipfw.
+  #
+  ## The following example tells the engine to reinject packets
+  # back into the ipfw firewall AT rule number 5500:
+  #
+  # ipfw-reinjection-rule-number: 5500
+
+
+napatech:
+    # When use_all_streams is set to "yes" the initialization code will query
+    # the Napatech service for all configured streams and listen on all of them.
+    # When set to "no" the streams config array will be used.
+    #
+    # This option necessitates running the appropriate NTPL commands to create
+    # the desired streams prior to running Suricata.
+    #use-all-streams: no
+
+    # The streams to listen on when auto-config is disabled or when and threading
+    # cpu-affinity is disabled.  This can be either:
+    #   an individual stream (e.g. streams: [0])
+    # or
+    #   a range of streams (e.g. streams: ["0-3"])
+    #
+    streams: ["0-3"]
+
+    # Stream stats can be enabled to provide fine grain packet and byte counters
+    # for each thread/stream that is configured.
+    #
+    enable-stream-stats: no
+
+    # When auto-config is enabled the streams will be created and assigned
+    # automatically to the NUMA node where the thread resides.  If cpu-affinity
+    # is enabled in the threading section.  Then the streams will be created
+    # according to the number of worker threads specified in the worker-cpu-set.
+    # Otherwise, the streams array is used to define the streams.
+    #
+    # This option is intended primarily to support legacy configurations.
+    #
+    # This option cannot be used simultaneously with either "use-all-streams"
+    # or "hardware-bypass".
+    #
+    auto-config: yes
+
+    # Enable hardware level flow bypass.
+    #
+    hardware-bypass: yes
+
+    # Enable inline operation.  When enabled traffic arriving on a given port is
+    # automatically forwarded out its peer port after analysis by Suricata.
+    #
+    inline: no
+
+    # Ports indicates which Napatech ports are to be used in auto-config mode.
+    # these are the port IDs of the ports that will be merged prior to the
+    # traffic being distributed to the streams.
+    #
+    # When hardware-bypass is enabled the ports must be configured as a segment.
+    # specify the port(s) on which upstream and downstream traffic will arrive.
+    # This information is necessary for the hardware to properly process flows.
+    #
+    # When using a tap configuration one of the ports will receive inbound traffic
+    # for the network and the other will receive outbound traffic. The two ports on a
+    # given segment must reside on the same network adapter.
+    #
+    # When using a SPAN-port configuration the upstream and downstream traffic
+    # arrives on a single port. This is configured by setting the two sides of the
+    # segment to reference the same port.  (e.g. 0-0 to configure a SPAN port on
+    # port 0).
+    #
+    # port segments are specified in the form:
+    #    ports: [0-1,2-3,4-5,6-6,7-7]
+    #
+    # For legacy systems when hardware-bypass is disabled this can be specified in any
+    # of the following ways:
+    #
+    #   a list of individual ports (e.g. ports: [0,1,2,3])
+    #
+    #   a range of ports (e.g. ports: [0-3])
+    #
+    #   "all" to indicate that all ports are to be merged together
+    #   (e.g. ports: [all])
+    #
+    # This parameter has no effect if auto-config is disabled.
+    #
+    ports: [0-1,2-3]
+
+    # When auto-config is enabled the hashmode specifies the algorithm for
+    # determining to which stream a given packet is to be delivered.
+    # This can be any valid Napatech NTPL hashmode command.
+    #
+    # The most common hashmode commands are:  hash2tuple, hash2tuplesorted,
+    # hash5tuple, hash5tuplesorted and roundrobin.
+    #
+    # See Napatech NTPL documentation other hashmodes and details on their use.
+    #
+    # This parameter has no effect if auto-config is disabled.
+    #
+    hashmode: hash5tuplesorted
+
+##
+## Configure Suricata to load Suricata-Update managed rules.
+##
+
+# As VyOS leverages suricata-update, the default rule path points to the
+# generated rules instead of the built-in rules.
+#
+# default-rule-path: /etc/suricata/rules
+default-rule-path: /var/lib/suricata/rules
+
+rule-files:
+  - suricata.rules
+
+##
+## Auxiliary configuration files.
+##
+
+# As VyOS leverages suricata-update, the classification file points to the
+# generated classification instead of the built-in one.
+#
+# classification-file: /etc/suricata/classification.config
+classification-file: /var/lib/suricata/rules/classification.config
+reference-config-file: /etc/suricata/reference.config
+# threshold-file: /etc/suricata/threshold.config
+
+##
+## Include other configs
+##
+
+# Includes:  Files included here will be handled as if they were in-lined
+# in this configuration file. Files with relative pathnames will be
+# searched for in the same directory as this configuration file. You may
+# use absolute pathnames too.
+# You can specify more than 2 configuration files, if needed.
+#include: include1.yaml
+#include: include2.yaml
diff --git a/data/templates/ids/suricata_logrotate.j2 b/data/templates/ids/suricata_logrotate.j2
new file mode 100644
index 000000000..62773fc68
--- /dev/null
+++ b/data/templates/ids/suricata_logrotate.j2
@@ -0,0 +1,17 @@
+{% for filename in [(log.eve.filename | default("eve.json"))] %}
+{{ filename if filename.startswith("/") else ("/var/log/suricata/" + filename) }}
+{% endfor %}{
+    weekly
+    dateext
+    dateformat _%Y-%m-%d_%H-%M-%S
+    maxsize 10M
+    rotate 10
+    missingok
+    nocompress
+    nocreate
+    nomail
+    sharedscripts
+    postrotate
+            /bin/kill -HUP `cat /run/suricata/suricata.pid 2>/dev/null` 2>/dev/null || true
+    endscript
+}
diff --git a/debian/control b/debian/control
index 801cce269..4151d83bb 100644
--- a/debian/control
+++ b/debian/control
@@ -163,6 +163,8 @@ Depends:
 # End "service dns dynamic"
 # # For "service ids"
   fastnetmon [amd64],
+  suricata,
+  suricata-update,
 # End "service ids"
 # # For "service ndp-proxy"
   ndppd,
diff --git a/interface-definitions/service_ids_suricata.xml.in b/interface-definitions/service_ids_suricata.xml.in
new file mode 100644
index 000000000..8c1973567
--- /dev/null
+++ b/interface-definitions/service_ids_suricata.xml.in
@@ -0,0 +1,250 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+  <node name="service">
+    <children>
+      <node name="ids">
+        <children>
+          <node name="suricata" owner="${vyos_conf_scripts_dir}/service_ids_suricata.py">
+            <properties>
+              <help>Network IDS, IPS and Network Security Monitoring</help>
+              <priority>740</priority>
+            </properties>
+            <children>
+              #include <include/generic-interface-multi.xml.i>
+              <tagNode name="address-group">
+                <properties>
+                  <help>Address group name</help>
+                  <completionHelp>
+                    <list>home-net external-net http-servers smtp-servers sql-servers dns-servers telnet-servers aim-servers dc-servers dnp3-server dnp3-client modbus-client modbus-server enip-client enip-server</list>
+                  </completionHelp>
+                  <constraint>
+                    <regex>[a-z0-9-]+</regex>
+                  </constraint>
+                </properties>
+                <children>
+                  <leafNode name="address">
+                    <properties>
+                      <help>IP address or subnet</help>
+                      <valueHelp>
+                        <format>ipv4</format>
+                        <description>IPv4 address to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>ipv6</format>
+                        <description>IPv6 address to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>ipv4net</format>
+                        <description>IPv4 prefix to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>ipv6net</format>
+                        <description>IPv6 prefix to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!ipv4</format>
+                        <description>Exclude the specified IPv4 address from matches</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!ipv6</format>
+                        <description>Exclude the specified IPv6 address from matches</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!ipv4net</format>
+                        <description>Exclude the specified IPv6 prefix from matches</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!ipv6net</format>
+                        <description>Exclude the specified IPv6 prefix from matches</description>
+                      </valueHelp>
+                      <constraint>
+                        <validator name="ipv4-address"/>
+                        <validator name="ipv6-address"/>
+                        <validator name="ipv4-prefix"/>
+                        <validator name="ipv6-prefix"/>
+                        <validator name="ipv4-address-exclude"/>
+                        <validator name="ipv6-address-exclude"/>
+                        <validator name="ipv4-prefix-exclude"/>
+                        <validator name="ipv6-prefix-exclude"/>
+                      </constraint>
+                      <multi/>
+                    </properties>
+                  </leafNode>
+                  <leafNode name="group">
+                    <properties>
+                      <help>Address group</help>
+                      <completionHelp>
+                        <path>service ids suricata address-group</path>
+                        <list>home-net external-net http-servers smtp-servers sql-servers dns-servers telnet-servers aim-servers dc-servers dnp3-server dnp3-client modbus-client modbus-server enip-client enip-server</list>
+                      </completionHelp>
+                      <valueHelp>
+                        <format>string</format>
+                        <description>Address group to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!string</format>
+                        <description>Exclude the specified address group from matches</description>
+                      </valueHelp>
+                      <constraint>
+                        <regex>!?[a-z0-9-]+</regex>
+                      </constraint>
+                      <multi/>
+                    </properties>
+                  </leafNode>
+                </children>
+              </tagNode>
+              <tagNode name="port-group">
+                <properties>
+                  <help>Port group name</help>
+                  <completionHelp>
+                    <list>http-ports shellcode-ports oracle-ports ssh-ports dnp3-ports modbus-ports file-data-ports ftp-ports geneve-ports vxlan-ports teredo-ports</list>
+                  </completionHelp>
+                  <constraint>
+                    <regex>[a-z0-9-]+</regex>
+                  </constraint>
+                </properties>
+                <children>
+                  <leafNode name="port">
+                    <properties>
+                      <help>Port number</help>
+                      <valueHelp>
+                        <format>u32:1-65535</format>
+                        <description>Numeric port to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!u32:1-65535</format>
+                        <description>Numeric port to exclude from matches</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>start-end</format>
+                        <description>Numbered port range (e.g. 1001-1005) to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!start-end</format>
+                        <description>Numbered port range (e.g. !1001-1005) to exclude from matches</description>
+                      </valueHelp>
+                      <constraint>
+                        <validator name="port-range"/>
+                        <validator name="port-range-exclude"/>
+                      </constraint>
+                      <multi/>
+                    </properties>
+                  </leafNode>
+                  <leafNode name="group">
+                    <properties>
+                      <help>Port group</help>
+                      <completionHelp>
+                        <path>service ids suricata port-group</path>
+                        <list>http-ports shellcode-ports oracle-ports ssh-ports dnp3-ports modbus-ports file-data-ports ftp-ports geneve-ports vxlan-ports teredo-ports</list>
+                      </completionHelp>
+                      <valueHelp>
+                        <format>string</format>
+                        <description>Port group to match</description>
+                      </valueHelp>
+                      <valueHelp>
+                        <format>!string</format>
+                        <description>Exclude the specified port group from matches</description>
+                      </valueHelp>
+                      <constraint>
+                        <regex>!?[a-z0-9-]+</regex>
+                      </constraint>
+                      <multi/>
+                    </properties>
+                  </leafNode>
+                </children>
+              </tagNode>
+              <node name="log">
+                <properties>
+                  <help>Suricata log outputs</help>
+                </properties>
+                <children>
+                  <node name="eve">
+                    <properties>
+                      <help>Extensible Event Format (EVE)</help>
+                    </properties>
+                    <children>
+                      <leafNode name="filetype">
+                        <properties>
+                          <help>EVE logging destination</help>
+                          <completionHelp>
+                            <list>regular syslog</list>
+                          </completionHelp>
+                          <valueHelp>
+                            <format>regular</format>
+                            <description>Log to filename</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>syslog</format>
+                            <description>Log to syslog</description>
+                          </valueHelp>
+                          <constraint>
+                            <regex>(regular|syslog)</regex>
+                          </constraint>
+                        </properties>
+                        <defaultValue>regular</defaultValue>
+                      </leafNode>
+                      <leafNode name="filename">
+                        <properties>
+                          <help>Log file</help>
+                          <valueHelp>
+                            <format>filename</format>
+                            <description>File name in default Suricata log directory</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>/path</format>
+                            <description>Absolute file path</description>
+                          </valueHelp>
+                        </properties>
+                        <defaultValue>eve.json</defaultValue>
+                      </leafNode>
+                      <leafNode name="type">
+                        <properties>
+                          <help>Log types</help>
+                          <completionHelp>
+                            <list>alert anomaly drop files http dns tls smtp dnp3 ftp rdp nfs smb tftp ikev2 dcerpc krb5 snmp rfb sip dhcp ssh mqtt http2 flow netflow</list>
+                          </completionHelp>
+                          <valueHelp>
+                            <format>alert</format>
+                            <description>Record events for rule matches</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>anomaly</format>
+                            <description>Record unexpected conditions such as truncated packets, packets with invalid IP/UDP/TCP length values, and other events that render the packet invalid for further processing or describe unexpected behavior on an established stream</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>drop</format>
+                            <description>Record events for dropped packets</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>file</format>
+                            <description>Record file details (e.g., MD5) for files extracted from application protocols (e.g., HTTP)</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>application (http, dns, tls, ...)</format>
+                            <description>Record application-level transactions</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>flow</format>
+                            <description>Record bi-directional flows</description>
+                          </valueHelp>
+                          <valueHelp>
+                            <format>netflow</format>
+                            <description>Record uni-directional flows</description>
+                          </valueHelp>
+                          <constraint>
+                            <regex>(alert|anomaly|http|dns|tls|files|drop|smtp|dnp3|ftp|rdp|nfs|smb|tftp|ikev2|dcerpc|krb5|snmp|rfb|sip|dhcp|ssh|mqtt|http2|flow|netflow)</regex>
+                          </constraint>
+                          <multi/>
+                        </properties>
+                      </leafNode>
+                    </children>
+                  </node>
+                </children>
+              </node>
+            </children>
+          </node>
+        </children>
+      </node>
+    </children>
+  </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/suricata.xml.in b/op-mode-definitions/suricata.xml.in
new file mode 100644
index 000000000..a5025afba
--- /dev/null
+++ b/op-mode-definitions/suricata.xml.in
@@ -0,0 +1,23 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+  <node name="update">
+    <children>
+      <node name="suricata">
+        <properties>
+          <help>Update Suricata</help>
+        </properties>
+        <command>if test -f /run/suricata/suricata.yaml; then sudo suricata-update --suricata-conf /run/suricata/suricata.yaml; sudo systemctl restart suricata; else echo "Service Suricata not configured"; fi </command>
+      </node>
+    </children>
+  </node>
+  <node name="restart">
+    <children>
+      <node name="suricata">
+        <properties>
+          <help>Restart Suricata service</help>
+        </properties>
+        <command>if systemctl is-active --quiet suricata; then sudo systemctl restart suricata.service; else echo "Service Suricata not configured"; fi</command>
+      </node>
+    </children>
+  </node>
+</interfaceDefinition>
diff --git a/python/vyos/base.py b/python/vyos/base.py
index 9b93cb2f2..054b1d837 100644
--- a/python/vyos/base.py
+++ b/python/vyos/base.py
@@ -41,7 +41,7 @@ class BaseWarning:
                 isfirstmessage = False
                 initial_indent = self.standardindent
             print(f'{mes}')
-        print('')
+        print('', flush=True)
 
 
 class Warning():
diff --git a/src/conf_mode/service_ids_suricata.py b/src/conf_mode/service_ids_suricata.py
new file mode 100755
index 000000000..49fbce244
--- /dev/null
+++ b/src/conf_mode/service_ids_suricata.py
@@ -0,0 +1,190 @@
+#!/usr/bin/env python3
+#
+# Copyright (C) 2024 VyOS maintainers and contributors
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+import os
+
+from sys import exit
+
+from vyos.base import Warning
+from vyos.config import Config
+from vyos.template import render
+from vyos.utils.process import call
+from vyos import ConfigError
+from vyos import airbag
+airbag.enable()
+
+config_file = '/run/suricata/suricata.yaml'
+rotate_file = '/etc/logrotate.d/suricata'
+
+address_group_defaults = {
+    'home-net': {'address': ['192.168.0.0/16','10.0.0.0/8','172.16.0.0/12']},
+    'external-net': {'group': ['!home-net']},
+    'http-servers': {'group': ['home-net']},
+    'smtp-servers': {'group': ['home-net']},
+    'sql-servers': {'group': ['home-net']},
+    'dns-servers': {'group': ['home-net']},
+    'telnet-servers': {'group': ['home-net']},
+    'aim-servers': {'group': ['external-net']},
+    'dc-servers': {'group': ['home-net']},
+    'dnp3-server': {'group': ['home-net']},
+    'modbus-client': {'group': ['home-net']},
+    'modbus-server': {'group': ['home-net']},
+    'enip-client': {'group': ['home-net']},
+    'enip-server': {'group': ['home-net']},
+}
+
+port_group_defaults = {
+    'http-ports': {'port': ['80']},
+    'shellcode-ports': {'port': ['!80']},
+    'oracle-ports': {'port': ['1521']},
+    'ssh-ports': {'port': ['22']},
+    'dnp3-ports': {'port': ['20000']},
+    'modbus-ports': {'port': ['502']},
+    'file-data-ports': {'port': ['110', '143'], 'group': ['http-ports']},
+    'ftp-ports': {'port': ['21']},
+    'geneve-ports': {'port': ['6081']},
+    'vxlan-ports': {'port': ['4789']},
+    'teredo-ports': {'port': ['3544']},
+}
+
+def get_config(config=None):
+    if config:
+        conf = config
+    else:
+        conf = Config()
+    base = ['service', 'ids', 'suricata']
+    if not conf.exists(base):
+        return None
+
+    suricata = conf.get_config_dict(base,
+                                      get_first_key=True,
+                                      with_recursive_defaults=True)
+
+    # Ensure minimal defaults are present
+    suricata['address-group'] = address_group_defaults | suricata.get('address-group', {})
+    suricata['port-group'] = port_group_defaults | suricata.get('port-group', {})
+
+    return suricata
+
+# https://en.wikipedia.org/wiki/Topological_sorting#Depth-first_search
+def topological_sort(source):
+    sorted_nodes = []
+    permanent_marks = set()
+    temporary_marks = set()
+
+    def visit(n, v):
+        if n in permanent_marks:
+            return
+        if n in temporary_marks:
+            raise ConfigError('At least one cycle exists in the referenced groups')
+
+        temporary_marks.add(n)
+
+        for m in v.get('group', []):
+            m = m.lstrip('!')
+            if m not in source:
+                raise ConfigError(f'Undefined referenced group "{m}"')
+            visit(m, source[m])
+
+        temporary_marks.remove(n)
+        permanent_marks.add(n)
+        sorted_nodes.append((n, v))
+
+    while len(permanent_marks) < len(source):
+        n = next(n for n in source.keys() if n not in permanent_marks)
+        visit(n, source[n])
+
+    return sorted_nodes
+
+def verify(suricata):
+    if not suricata:
+        return None
+
+    if 'interface' not in suricata:
+        raise ConfigError('No interfaces configured')
+
+    try:
+        topological_sort(suricata['address-group'])
+    except (ConfigError,StopIteration) as e:
+        raise ConfigError(f'Invalid address-group: {e}')
+
+    try:
+        topological_sort(suricata['port-group'])
+    except (ConfigError,StopIteration) as e:
+        raise ConfigError(f'Invalid port-group: {e}')
+
+def generate(suricata):
+    if not suricata:
+        for file in [config_file, rotate_file]:
+            if os.path.isfile(file):
+                os.unlink(file)
+
+        return None
+
+    # Config-related formatters
+    def to_var(s:str):
+        return s.replace('-','_').upper()
+
+    def to_val(s:str):
+        return s.replace('-',':')
+
+    def to_ref(s:str):
+        if s[0] == '!':
+            return '!$' + to_var(s[1:])
+        return '$' + to_var(s)
+
+    def to_config(kind:str):
+        def format_group(group):
+            (name, value) = group
+            property = [to_val(property) for property in value.get(kind,[])]
+            group = [to_ref(group) for group in value.get('group',[])]
+            return (to_var(name), property + group)
+        return format_group
+
+    # Format the address group
+    suricata['address-group'] = map(to_config('address'),
+                                    topological_sort(suricata['address-group']))
+
+    # Format the port group
+    suricata['port-group'] = map(to_config('port'),
+                                    topological_sort(suricata['port-group']))
+
+    render(config_file, 'ids/suricata.j2', {'suricata': suricata})
+    render(rotate_file, 'ids/suricata_logrotate.j2', suricata)
+    return None
+
+def apply(suricata):
+    systemd_service = 'suricata.service'
+    if not suricata or 'interface' not in suricata:
+        # Stop suricata service if removed
+        call(f'systemctl stop {systemd_service}')
+    else:
+        Warning('To fetch the latest rules, use "update suricata"; '
+                'To periodically fetch the latest rules, '
+                'use the task scheduler!')
+        call(f'systemctl restart {systemd_service}')
+
+    return None
+
+if __name__ == '__main__':
+    try:
+        c = get_config()
+        verify(c)
+        generate(c)
+        apply(c)
+    except ConfigError as e:
+        print(e)
+        exit(1)
diff --git a/src/etc/systemd/system/suricata.service.d/10-override.conf b/src/etc/systemd/system/suricata.service.d/10-override.conf
new file mode 100644
index 000000000..781256cf5
--- /dev/null
+++ b/src/etc/systemd/system/suricata.service.d/10-override.conf
@@ -0,0 +1,9 @@
+[Service]
+ExecStart=
+ExecStart=/usr/bin/suricata -D --af-packet -c /run/suricata/suricata.yaml --pidfile /run/suricata/suricata.pid
+PIDFile=
+PIDFile=/run/suricata/suricata.pid
+ExecReload=
+ExecReload=/usr/bin/suricatasc -c reload-rules /run/suricata/suricata.socket ; /bin/kill -HUP $MAINPID
+ExecStop=
+ExecStop=/usr/bin/suricatasc -c shutdown /run/suricata/suricata.socket
diff --git a/src/validators/port-range-exclude b/src/validators/port-range-exclude
new file mode 100755
index 000000000..4c049e98f
--- /dev/null
+++ b/src/validators/port-range-exclude
@@ -0,0 +1,7 @@
+#!/bin/sh
+arg="$1"
+if [ "${arg:0:1}" != "!" ]; then
+  exit 1
+fi
+path=$(dirname "$0")
+${path}/port-range "${arg:1}"