T5150: do not apply zebra route-map from routing-daemon config level

14 files changed, 4 insertions, 99 deletions

diff --git a/data/templates/frr/vrf.route-map.frr.j2 b/data/templates/frr/vrf.route-map.frr.j2
deleted file mode 100644
index 5e0c56a7b..000000000
--- a/data/templates/frr/vrf.route-map.frr.j2
+++ /dev/null
@@ -1,10 +0,0 @@
-!
-{% if vrf is vyos_defined and route_map is vyos_defined %}
-vrf {{ vrf }}
- ip protocol {{ protocol }} route-map {{ route_map }}
- exit-vrf
-!
-{% elif route_map is vyos_defined %}
-ip protocol {{ protocol }} route-map {{ route_map }}
-{% endif %}
-!
diff --git a/data/templates/frr/vrf.route-map.v6.frr.j2 b/data/templates/frr/vrf.route-map.v6.frr.j2
deleted file mode 100644
index 7dc59a046..000000000
--- a/data/templates/frr/vrf.route-map.v6.frr.j2
+++ /dev/null
@@ -1,10 +0,0 @@
-!
-{% if vrf is vyos_defined and route_map is vyos_defined %}
-vrf {{ vrf }}
- ipv6 protocol {{ protocol }} route-map {{ route_map }}
- exit-vrf
-!
-{% elif route_map is vyos_defined %}
-ipv6 protocol {{ protocol }} route-map {{ route_map }}
-{% endif %}
-!
diff --git a/interface-definitions/include/bgp/protocol-common-config.xml.i b/interface-definitions/include/bgp/protocol-common-config.xml.i
index a9122db57..527eaf991 100644
--- a/interface-definitions/include/bgp/protocol-common-config.xml.i
+++ b/interface-definitions/include/bgp/protocol-common-config.xml.i
@@ -1565,7 +1565,6 @@
     #include <include/port-number.xml.i>
   </children>
 </tagNode>
-#include <include/route-map.xml.i>
 <node name="timers">
   <properties>
     <help>BGP protocol timers</help>
diff --git a/interface-definitions/include/eigrp/protocol-common-config.xml.i b/interface-definitions/include/eigrp/protocol-common-config.xml.i
index 88365187a..a21d18424 100644
--- a/interface-definitions/include/eigrp/protocol-common-config.xml.i
+++ b/interface-definitions/include/eigrp/protocol-common-config.xml.i
@@ -107,7 +107,6 @@
     <multi/>
   </properties>
 </leafNode>
-#include <include/route-map.xml.i>
 #include <include/router-id.xml.i>
 <!-- FRR timers not implemented yet -->
 <leafNode name="variance">
diff --git a/interface-definitions/include/isis/protocol-common-config.xml.i b/interface-definitions/include/isis/protocol-common-config.xml.i
index 8103b5c5d..4ca7061db 100644
--- a/interface-definitions/include/isis/protocol-common-config.xml.i
+++ b/interface-definitions/include/isis/protocol-common-config.xml.i
@@ -687,5 +687,4 @@
     </leafNode>
   </children>
 </tagNode>
-#include <include/route-map.xml.i>
 <!-- include end -->
diff --git a/interface-definitions/include/ospf/protocol-common-config.xml.i b/interface-definitions/include/ospf/protocol-common-config.xml.i
index e400119dd..b7f22cb88 100644
--- a/interface-definitions/include/ospf/protocol-common-config.xml.i
+++ b/interface-definitions/include/ospf/protocol-common-config.xml.i
@@ -816,7 +816,6 @@
     </leafNode>
   </children>
 </node>
-#include <include/route-map.xml.i>
 <node name="timers">
   <properties>
     <help>Adjust routing timers</help>
diff --git a/interface-definitions/include/ospfv3/protocol-common-config.xml.i b/interface-definitions/include/ospfv3/protocol-common-config.xml.i
index 1c33ca920..a7de50638 100644
--- a/interface-definitions/include/ospfv3/protocol-common-config.xml.i
+++ b/interface-definitions/include/ospfv3/protocol-common-config.xml.i
@@ -256,5 +256,4 @@
     </node>
   </children>
 </node>
-#include <include/route-map.xml.i>
 <!-- include end -->
diff --git a/smoketest/scripts/cli/test_protocols_bgp.py b/smoketest/scripts/cli/test_protocols_bgp.py
index f6eede87a..ce9590fc2 100755
--- a/smoketest/scripts/cli/test_protocols_bgp.py
+++ b/smoketest/scripts/cli/test_protocols_bgp.py
@@ -713,7 +713,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase):
         for prefix in listen_ranges:
             self.assertIn(f' bgp listen range {prefix} peer-group {peer_group}', frrconfig)
 
-
     def test_bgp_07_l2vpn_evpn(self):
         vnis = ['10010', '10020', '10030']
         neighbors = ['192.0.2.10', '192.0.2.20', '192.0.2.30']
@@ -743,26 +742,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase):
             self.assertIn(f'   advertise-default-gw', vniconfig)
             self.assertIn(f'   advertise-svi-ip', vniconfig)
 
-    def test_bgp_08_zebra_route_map(self):
-        # Implemented because of T3328
-        self.cli_set(base_path + ['route-map', route_map_in])
-        # commit changes
-        self.cli_commit()
-
-        # Verify FRR configuration
-        zebra_route_map = f'ip protocol bgp route-map {route_map_in}'
-        frrconfig = self.getFRRconfig(zebra_route_map)
-        self.assertIn(zebra_route_map, frrconfig)
-
-        # Remove the route-map again
-        self.cli_delete(base_path + ['route-map'])
-        # commit changes
-        self.cli_commit()
-
-        # Verify FRR configuration
-        frrconfig = self.getFRRconfig(zebra_route_map)
-        self.assertNotIn(zebra_route_map, frrconfig)
-
     def test_bgp_09_distance_and_flowspec(self):
         distance_external = '25'
         distance_internal = '30'
diff --git a/src/conf_mode/protocols_bgp.py b/src/conf_mode/protocols_bgp.py
index cf553f0e8..66505e58d 100755
--- a/src/conf_mode/protocols_bgp.py
+++ b/src/conf_mode/protocols_bgp.py
@@ -484,26 +484,15 @@ def generate(bgp):
     if not bgp or 'deleted' in bgp:
         return None
 
-    bgp['protocol'] = 'bgp' # required for frr/vrf.route-map.frr.j2
-    bgp['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', bgp)
     bgp['frr_bgpd_config']  = render_to_string('frr/bgpd.frr.j2', bgp)
-
     return None
 
 def apply(bgp):
     bgp_daemon = 'bgpd'
-    zebra_daemon = 'zebra'
 
     # Save original configuration prior to starting any commit actions
     frr_cfg = frr.FRRConfig()
 
-    # The route-map used for the FIB (zebra) is part of the zebra daemon
-    frr_cfg.load_configuration(zebra_daemon)
-    frr_cfg.modify_section(r'(\s+)?ip protocol bgp route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)')
-    if 'frr_zebra_config' in bgp:
-        frr_cfg.add_before(frr.default_add_before, bgp['frr_zebra_config'])
-    frr_cfg.commit_configuration(zebra_daemon)
-
     # Generate empty helper string which can be ammended to FRR commands, it
     # will be either empty (default VRF) or contain the "vrf <name" statement
     vrf = ''
diff --git a/src/conf_mode/protocols_eigrp.py b/src/conf_mode/protocols_eigrp.py
index 6e75e34ff..609b39065 100755
--- a/src/conf_mode/protocols_eigrp.py
+++ b/src/conf_mode/protocols_eigrp.py
@@ -78,24 +78,14 @@ def generate(eigrp):
     if not eigrp or 'deleted' in eigrp:
         return None
 
-    eigrp['protocol'] = 'eigrp' # required for frr/vrf.route-map.frr.j2
-    eigrp['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', eigrp)
     eigrp['frr_eigrpd_config']  = render_to_string('frr/eigrpd.frr.j2', eigrp)
 
 def apply(eigrp):
     eigrp_daemon = 'eigrpd'
-    zebra_daemon = 'zebra'
 
     # Save original configuration prior to starting any commit actions
     frr_cfg = frr.FRRConfig()
 
-    # The route-map used for the FIB (zebra) is part of the zebra daemon
-    frr_cfg.load_configuration(zebra_daemon)
-    frr_cfg.modify_section(r'(\s+)?ip protocol eigrp route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)')
-    if 'frr_zebra_config' in eigrp:
-        frr_cfg.add_before(frr.default_add_before, eigrp['frr_zebra_config'])
-    frr_cfg.commit_configuration(zebra_daemon)
-
     # Generate empty helper string which can be ammended to FRR commands, it
     # will be either empty (default VRF) or contain the "vrf <name" statement
     vrf = ''
diff --git a/src/conf_mode/protocols_isis.py b/src/conf_mode/protocols_isis.py
index cb8ea3be4..af2937db8 100755
--- a/src/conf_mode/protocols_isis.py
+++ b/src/conf_mode/protocols_isis.py
@@ -203,7 +203,7 @@ def verify(isis):
         if list(set(global_range) & set(local_range)):
             raise ConfigError(f'Segment-Routing Global Block ({g_low_label_value}/{g_high_label_value}) '\
                               f'conflicts with Local Block ({l_low_label_value}/{l_high_label_value})!')
-        
+
     # Check for a blank or invalid value per prefix
     if dict_search('segment_routing.prefix', isis):
         for prefix, prefix_config in isis['segment_routing']['prefix'].items():
@@ -218,7 +218,7 @@ def verify(isis):
     if dict_search('segment_routing.prefix', isis):
         for prefix, prefix_config in isis['segment_routing']['prefix'].items():
             if 'absolute' in prefix_config:
-                if ("explicit_null" in prefix_config['absolute']) and ("no_php_flag" in prefix_config['absolute']): 
+                if ("explicit_null" in prefix_config['absolute']) and ("no_php_flag" in prefix_config['absolute']):
                     raise ConfigError(f'Segment routing prefix {prefix} cannot have both explicit-null '\
                                       f'and no-php-flag configured at the same time.')
             elif 'index' in prefix_config:
@@ -232,25 +232,15 @@ def generate(isis):
     if not isis or 'deleted' in isis:
         return None
 
-    isis['protocol'] = 'isis' # required for frr/vrf.route-map.frr.j2
-    isis['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', isis)
     isis['frr_isisd_config'] = render_to_string('frr/isisd.frr.j2', isis)
     return None
 
 def apply(isis):
     isis_daemon = 'isisd'
-    zebra_daemon = 'zebra'
 
     # Save original configuration prior to starting any commit actions
     frr_cfg = frr.FRRConfig()
 
-    # The route-map used for the FIB (zebra) is part of the zebra daemon
-    frr_cfg.load_configuration(zebra_daemon)
-    frr_cfg.modify_section('(\s+)?ip protocol isis route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)')
-    if 'frr_zebra_config' in isis:
-        frr_cfg.add_before(frr.default_add_before, isis['frr_zebra_config'])
-    frr_cfg.commit_configuration(zebra_daemon)
-
     # Generate empty helper string which can be ammended to FRR commands, it
     # will be either empty (default VRF) or contain the "vrf <name" statement
     vrf = ''
diff --git a/src/conf_mode/protocols_ospf.py b/src/conf_mode/protocols_ospf.py
index eb64afa0c..fbb876123 100755
--- a/src/conf_mode/protocols_ospf.py
+++ b/src/conf_mode/protocols_ospf.py
@@ -256,25 +256,15 @@ def generate(ospf):
     if not ospf or 'deleted' in ospf:
         return None
 
-    ospf['protocol'] = 'ospf' # required for frr/vrf.route-map.frr.j2
-    ospf['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', ospf)
     ospf['frr_ospfd_config'] = render_to_string('frr/ospfd.frr.j2', ospf)
     return None
 
 def apply(ospf):
     ospf_daemon = 'ospfd'
-    zebra_daemon = 'zebra'
 
     # Save original configuration prior to starting any commit actions
     frr_cfg = frr.FRRConfig()
 
-    # The route-map used for the FIB (zebra) is part of the zebra daemon
-    frr_cfg.load_configuration(zebra_daemon)
-    frr_cfg.modify_section('(\s+)?ip protocol ospf route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)')
-    if 'frr_zebra_config' in ospf:
-        frr_cfg.add_before(frr.default_add_before, ospf['frr_zebra_config'])
-    frr_cfg.commit_configuration(zebra_daemon)
-
     # Generate empty helper string which can be ammended to FRR commands, it
     # will be either empty (default VRF) or contain the "vrf <name" statement
     vrf = ''
@@ -292,6 +282,7 @@ def apply(ospf):
 
     if 'frr_ospfd_config' in ospf:
         frr_cfg.add_before(frr.default_add_before, ospf['frr_ospfd_config'])
+
     frr_cfg.commit_configuration(ospf_daemon)
 
     return None
diff --git a/src/conf_mode/protocols_ospfv3.py b/src/conf_mode/protocols_ospfv3.py
index 1e2c02d03..ee1fdd399 100755
--- a/src/conf_mode/protocols_ospfv3.py
+++ b/src/conf_mode/protocols_ospfv3.py
@@ -146,25 +146,15 @@ def generate(ospfv3):
     if not ospfv3 or 'deleted' in ospfv3:
         return None
 
-    ospfv3['protocol'] = 'ospf6' # required for frr/vrf.route-map.v6.frr.j2
-    ospfv3['frr_zebra_config'] = render_to_string('frr/vrf.route-map.v6.frr.j2', ospfv3)
     ospfv3['new_frr_config'] = render_to_string('frr/ospf6d.frr.j2', ospfv3)
     return None
 
 def apply(ospfv3):
     ospf6_daemon = 'ospf6d'
-    zebra_daemon = 'zebra'
 
     # Save original configuration prior to starting any commit actions
     frr_cfg = frr.FRRConfig()
 
-    # The route-map used for the FIB (zebra) is part of the zebra daemon
-    frr_cfg.load_configuration(zebra_daemon)
-    frr_cfg.modify_section('(\s+)?ipv6 protocol ospf6 route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)')
-    if 'frr_zebra_config' in ospfv3:
-        frr_cfg.add_before(frr.default_add_before, ospfv3['frr_zebra_config'])
-    frr_cfg.commit_configuration(zebra_daemon)
-
     # Generate empty helper string which can be ammended to FRR commands, it
     # will be either empty (default VRF) or contain the "vrf <name" statement
     vrf = ''
diff --git a/src/conf_mode/protocols_static.py b/src/conf_mode/protocols_static.py
index 3eabf24bc..5122f60b2 100755
--- a/src/conf_mode/protocols_static.py
+++ b/src/conf_mode/protocols_static.py
@@ -108,6 +108,7 @@ def apply(static):
 
     # Save original configuration prior to starting any commit actions
     frr_cfg = frr.FRRConfig()
+    frr_cfg.load_configuration(static_daemon)
 
     if 'vrf' in static:
         vrf = static['vrf']