summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorViacheslav Hletenko <v.gletenko@vyos.io>2024-06-10 09:21:58 +0000
committerViacheslav Hletenko <v.gletenko@vyos.io>2024-06-10 09:21:58 +0000
commitae0ca9f5e54b841eb8ff37b41033bcca74d6827c (patch)
treeba84607d578d826609e5fc42544204ac77aa889e
parent82607438d6df5291c581d802c7a2a98eabe084ff (diff)
downloadvyos-1x-ae0ca9f5e54b841eb8ff37b41033bcca74d6827c.tar.gz
vyos-1x-ae0ca9f5e54b841eb8ff37b41033bcca74d6827c.zip
T751: Remove ids suricata
-rw-r--r--data/templates/ids/suricata.j21280
-rw-r--r--data/templates/ids/suricata_logrotate.j217
-rw-r--r--debian/control2
-rw-r--r--interface-definitions/service_suricata.xml.in238
-rw-r--r--op-mode-definitions/suricata.xml.in23
-rwxr-xr-xsrc/conf_mode/service_suricata.py161
-rw-r--r--src/etc/systemd/system/suricata.service.d/10-override.conf9
7 files changed, 0 insertions, 1730 deletions
diff --git a/data/templates/ids/suricata.j2 b/data/templates/ids/suricata.j2
deleted file mode 100644
index 585db93eb..000000000
--- a/data/templates/ids/suricata.j2
+++ /dev/null
@@ -1,1280 +0,0 @@
-%YAML 1.1
----
-
-# Suricata configuration file. In addition to the comments describing all
-# options in this file, full documentation can be found at:
-# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html
-#
-# This configuration file generated by:
-# Suricata 6.0.10
-
-##
-## Step 1: Inform Suricata about your network
-##
-
-vars:
- # more specific is better for alert accuracy and performance
- address-groups:
-{% for (name, value) in suricata['address_group'] %}
- {{ name }}: "[{{ value | join(',') }}]"
-{% endfor %}
-
- port-groups:
-{% for (name, value) in suricata['port_group'] %}
- {{ name }}: "[{{ value | join(',') }}]"
-{% endfor %}
-
-##
-## Step 2: Select outputs to enable
-##
-
-# The default logging directory. Any log or output file will be
-# placed here if it's not specified with a full path name. This can be
-# overridden with the -l command line parameter.
-default-log-dir: /var/log/suricata/
-
-# Configure the type of alert (and other) logging you would like.
-{% if suricata.log is vyos_defined %}
-outputs:
-{% if suricata.log.eve is vyos_defined %}
- # Extensible Event Format (nicknamed EVE) event log in JSON format
- - eve-log:
- enabled: yes
- filetype: {{ suricata.log.eve.filetype }} #regular|syslog|unix_dgram|unix_stream|redis
- filename: {{ suricata.log.eve.filename }}
-
- types:
-{% if suricata.log.eve.type is not vyos_defined or "alert" in suricata.log.eve.type %}
- - alert:
- tagged-packets: yes
-{% endif %}
-{% if "http" in suricata.log.eve.type %}
- - http:
- enabled: yes
- extended: yes
-{% endif %}
-{% if "tls" in suricata.log.eve.type %}
- - tls:
- enabled: yes
- extended: yes # enable this for extended logging information
-{% endif %}
-{% for protocol in suricata.log.eve.type %}
-{% if protocol not in ["alert","http","tls"] %}
- - {{ protocol }}:
- enabled: yes
-{% endif %}
-{% endfor %}
-{% endif %}
-{% endif %}
-
-##
-## Step 3: Configure common capture settings
-##
-## See "Advanced Capture Options" below for more options, including Netmap
-## and PF_RING.
-##
-
-# Linux high speed capture support
-af-packet:
-{% for interface in suricata.interface %}
- - interface: {{ interface }}
- # Default clusterid. AF_PACKET will load balance packets based on flow.
- cluster-id: 99
- # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
- # This is only supported for Linux kernel > 3.1
- # possible value are:
- # * cluster_flow: all packets of a given flow are sent to the same socket
- # * cluster_cpu: all packets treated in kernel by a CPU are sent to the same socket
- # * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
- # socket. Requires at least Linux 3.14.
- # * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for
- # more info.
- # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
- # with capture card using RSS (requires cpu affinity tuning and system IRQ tuning)
- cluster-type: cluster_flow
- # In some fragmentation cases, the hash can not be computed. If "defrag" is set
- # to yes, the kernel will do the needed defragmentation before sending the packets.
- defrag: yes
-{% endfor %}
-
-# Cross platform libpcap capture support
-pcap:
-{% for interface in suricata.interface %}
- - interface: {{ interface }}
-{% endfor %}
-
-# Settings for reading pcap files
-pcap-file:
- # Possible values are:
- # - yes: checksum validation is forced
- # - no: checksum validation is disabled
- # - auto: Suricata uses a statistical approach to detect when
- # checksum off-loading is used. (default)
- # Warning: 'checksum-validation' must be set to yes to have checksum tested
- checksum-checks: auto
-
-# See "Advanced Capture Options" below for more options, including Netmap
-# and PF_RING.
-
-
-##
-## Step 4: App Layer Protocol configuration
-##
-
-# Configure the app-layer parsers.
-#
-# The error-policy setting applies to all app-layer parsers. Values can be
-# "drop-flow", "pass-flow", "bypass", "drop-packet", "pass-packet", "reject" or
-# "ignore" (the default).
-#
-# The protocol's section details each protocol.
-#
-# The option "enabled" takes 3 values - "yes", "no", "detection-only".
-# "yes" enables both detection and the parser, "no" disables both, and
-# "detection-only" enables protocol detection only (parser disabled).
-app-layer:
- # error-policy: ignore
- protocols:
- rfb:
- enabled: yes
- detection-ports:
- dp: 5900, 5901, 5902, 5903, 5904, 5905, 5906, 5907, 5908, 5909
- # MQTT, disabled by default.
- mqtt:
- enabled: yes
- # max-msg-length: 1mb
- # subscribe-topic-match-limit: 100
- # unsubscribe-topic-match-limit: 100
- # Maximum number of live MQTT transactions per flow
- # max-tx: 4096
- krb5:
- enabled: yes
- snmp:
- enabled: yes
- ikev2:
- enabled: yes
- tls:
- enabled: yes
- detection-ports:
- dp: 443
-
- # Generate JA3 fingerprint from client hello. If not specified it
- # will be disabled by default, but enabled if rules require it.
- #ja3-fingerprints: auto
-
- # What to do when the encrypted communications start:
- # - default: keep tracking TLS session, check for protocol anomalies,
- # inspect tls_* keywords. Disables inspection of unmodified
- # 'content' signatures.
- # - bypass: stop processing this flow as much as possible. No further
- # TLS parsing and inspection. Offload flow bypass to kernel
- # or hardware if possible.
- # - full: keep tracking and inspection as normal. Unmodified content
- # keyword signatures are inspected as well.
- #
- # For best performance, select 'bypass'.
- #
- #encryption-handling: default
-
- dcerpc:
- enabled: yes
- ftp:
- enabled: yes
- # memcap: 64mb
- rdp:
- enabled: yes
- ssh:
- enabled: yes
- #hassh: yes
- # HTTP2: Experimental HTTP 2 support. Disabled by default.
- http2:
- enabled: no
- # use http keywords on HTTP2 traffic
- http1-rules: no
- smtp:
- enabled: yes
- raw-extraction: no
- # Configure SMTP-MIME Decoder
- mime:
- # Decode MIME messages from SMTP transactions
- # (may be resource intensive)
- # This field supersedes all others because it turns the entire
- # process on or off
- decode-mime: yes
-
- # Decode MIME entity bodies (ie. Base64, quoted-printable, etc.)
- decode-base64: yes
- decode-quoted-printable: yes
-
- # Maximum bytes per header data value stored in the data structure
- # (default is 2000)
- header-value-depth: 2000
-
- # Extract URLs and save in state data structure
- extract-urls: yes
- # Set to yes to compute the md5 of the mail body. You will then
- # be able to journalize it.
- body-md5: no
- # Configure inspected-tracker for file_data keyword
- inspected-tracker:
- content-limit: 100000
- content-inspect-min-size: 32768
- content-inspect-window: 4096
- imap:
- enabled: detection-only
- smb:
- enabled: yes
- detection-ports:
- dp: 139, 445
-
- # Stream reassembly size for SMB streams. By default track it completely.
- #stream-depth: 0
-
- nfs:
- enabled: yes
- tftp:
- enabled: yes
- dns:
- tcp:
- enabled: yes
- detection-ports:
- dp: 53
- udp:
- enabled: yes
- detection-ports:
- dp: 53
- http:
- enabled: yes
- # memcap: Maximum memory capacity for HTTP
- # Default is unlimited, values can be 64mb, e.g.
-
- # default-config: Used when no server-config matches
- # personality: List of personalities used by default
- # request-body-limit: Limit reassembly of request body for inspection
- # by http_client_body & pcre /P option.
- # response-body-limit: Limit reassembly of response body for inspection
- # by file_data, http_server_body & pcre /Q option.
- #
- # For advanced options, see the user guide
-
-
- # server-config: List of server configurations to use if address matches
- # address: List of IP addresses or networks for this block
- # personality: List of personalities used by this block
- #
- # Then, all the fields from default-config can be overloaded
- #
- # Currently Available Personalities:
- # Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
- # IIS_7_0, IIS_7_5, Apache_2
- libhtp:
- default-config:
- personality: IDS
-
- # Can be specified in kb, mb, gb. Just a number indicates
- # it's in bytes.
- request-body-limit: 100kb
- response-body-limit: 100kb
-
- # inspection limits
- request-body-minimal-inspect-size: 32kb
- request-body-inspect-window: 4kb
- response-body-minimal-inspect-size: 40kb
- response-body-inspect-window: 16kb
-
- # response body decompression (0 disables)
- response-body-decompress-layer-limit: 2
-
- # auto will use http-body-inline mode in IPS mode, yes or no set it statically
- http-body-inline: auto
-
- # Decompress SWF files.
- # Two types: 'deflate', 'lzma', 'both' will decompress deflate and lzma
- # compress-depth:
- # Specifies the maximum amount of data to decompress,
- # set 0 for unlimited.
- # decompress-depth:
- # Specifies the maximum amount of decompressed data to obtain,
- # set 0 for unlimited.
- swf-decompression:
- enabled: yes
- type: both
- compress-depth: 100kb
- decompress-depth: 100kb
-
- # Use a random value for inspection sizes around the specified value.
- # This lowers the risk of some evasion techniques but could lead
- # to detection change between runs. It is set to 'yes' by default.
- #randomize-inspection-sizes: yes
- # If "randomize-inspection-sizes" is active, the value of various
- # inspection size will be chosen from the [1 - range%, 1 + range%]
- # range
- # Default value of "randomize-inspection-range" is 10.
- #randomize-inspection-range: 10
-
- # decoding
- double-decode-path: no
- double-decode-query: no
-
- # Can enable LZMA decompression
- #lzma-enabled: false
- # Memory limit usage for LZMA decompression dictionary
- # Data is decompressed until dictionary reaches this size
- #lzma-memlimit: 1mb
- # Maximum decompressed size with a compression ratio
- # above 2048 (only LZMA can reach this ratio, deflate cannot)
- #compression-bomb-limit: 1mb
- # Maximum time spent decompressing a single transaction in usec
- #decompression-time-limit: 100000
-
- server-config:
-
- #- apache:
- # address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
- # personality: Apache_2
- # # Can be specified in kb, mb, gb. Just a number indicates
- # # it's in bytes.
- # request-body-limit: 4096
- # response-body-limit: 4096
- # double-decode-path: no
- # double-decode-query: no
-
- #- iis7:
- # address:
- # - 192.168.0.0/24
- # - 192.168.10.0/24
- # personality: IIS_7_0
- # # Can be specified in kb, mb, gb. Just a number indicates
- # # it's in bytes.
- # request-body-limit: 4096
- # response-body-limit: 4096
- # double-decode-path: no
- # double-decode-query: no
-
- # Note: Modbus probe parser is minimalist due to the limited usage in the field.
- # Only Modbus message length (greater than Modbus header length)
- # and protocol ID (equal to 0) are checked in probing parser
- # It is important to enable detection port and define Modbus port
- # to avoid false positives
- modbus:
- # How many unanswered Modbus requests are considered a flood.
- # If the limit is reached, the app-layer-event:modbus.flooded; will match.
- #request-flood: 500
-
- enabled: no
- detection-ports:
- dp: 502
- # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
- # is recommended to keep the TCP connection opened with a remote device
- # and not to open and close it for each MODBUS/TCP transaction. In that
- # case, it is important to set the depth of the stream reassembling as
- # unlimited (stream.reassembly.depth: 0)
-
- # Stream reassembly size for modbus. By default track it completely.
- stream-depth: 0
-
- # DNP3
- dnp3:
- enabled: no
- detection-ports:
- dp: 20000
-
- # SCADA EtherNet/IP and CIP protocol support
- enip:
- enabled: no
- detection-ports:
- dp: 44818
- sp: 44818
-
- ntp:
- enabled: yes
-
- dhcp:
- enabled: yes
-
- sip:
- enabled: yes
-
-# Limit for the maximum number of asn1 frames to decode (default 256)
-asn1-max-frames: 256
-
-# Datasets default settings
-# datasets:
-# # Default fallback memcap and hashsize values for datasets in case these
-# # were not explicitly defined.
-# defaults:
-# memcap: 100mb
-# hashsize: 2048
-
-##############################################################################
-##
-## Advanced settings below
-##
-##############################################################################
-
-##
-## Run Options
-##
-
-# Run Suricata with a specific user-id and group-id:
-#run-as:
-# user: suri
-# group: suri
-
-# Some logging modules will use that name in event as identifier. The default
-# value is the hostname
-#sensor-name: suricata
-
-# Default location of the pid file. The pid file is only used in
-# daemon mode (start Suricata with -D). If not running in daemon mode
-# the --pidfile command line option must be used to create a pid file.
-#pid-file: /var/run/suricata.pid
-
-# Daemon working directory
-# Suricata will change directory to this one if provided
-# Default: "/"
-#daemon-directory: "/"
-
-# Umask.
-# Suricata will use this umask if it is provided. By default it will use the
-# umask passed on by the shell.
-#umask: 022
-
-# Suricata core dump configuration. Limits the size of the core dump file to
-# approximately max-dump. The actual core dump size will be a multiple of the
-# page size. Core dumps that would be larger than max-dump are truncated. On
-# Linux, the actual core dump size may be a few pages larger than max-dump.
-# Setting max-dump to 0 disables core dumping.
-# Setting max-dump to 'unlimited' will give the full core dump file.
-# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
-# to be 'unlimited'.
-
-coredump:
- max-dump: unlimited
-
-# If the Suricata box is a router for the sniffed networks, set it to 'router'. If
-# it is a pure sniffing setup, set it to 'sniffer-only'.
-# If set to auto, the variable is internally switched to 'router' in IPS mode
-# and 'sniffer-only' in IDS mode.
-# This feature is currently only used by the reject* keywords.
-host-mode: auto
-
-# Number of packets preallocated per thread. The default is 1024. A higher number
-# will make sure each CPU will be more easily kept busy, but may negatively
-# impact caching.
-#max-pending-packets: 1024
-
-# Runmode the engine should use. Please check --list-runmodes to get the available
-# runmodes for each packet acquisition method. Default depends on selected capture
-# method. 'workers' generally gives best performance.
-#runmode: autofp
-
-# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
-#
-# Supported schedulers are:
-#
-# hash - Flow assigned to threads using the 5-7 tuple hash.
-# ippair - Flow assigned to threads using addresses only.
-#
-#autofp-scheduler: hash
-
-# Preallocated size for each packet. Default is 1514 which is the classical
-# size for pcap on Ethernet. You should adjust this value to the highest
-# packet size (MTU + hardware header) on your system.
-#default-packet-size: 1514
-
-# Unix command socket that can be used to pass commands to Suricata.
-# An external tool can then connect to get information from Suricata
-# or trigger some modifications of the engine. Set enabled to yes
-# to activate the feature. In auto mode, the feature will only be
-# activated in live capture mode. You can use the filename variable to set
-# the file name of the socket.
-unix-command:
- enabled: yes
- filename: /run/suricata/suricata.socket
-
-# Magic file. The extension .mgc is added to the value here.
-#magic-file: /usr/share/file/magic
-#magic-file:
-
-# GeoIP2 database file. Specify path and filename of GeoIP2 database
-# if using rules with "geoip" rule option.
-#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb
-
-legacy:
- uricontent: enabled
-
-##
-## Detection settings
-##
-
-# Set the order of alerts based on actions
-# The default order is pass, drop, reject, alert
-# action-order:
-# - pass
-# - drop
-# - reject
-# - alert
-
-# Define maximum number of possible alerts that can be triggered for the same
-# packet. Default is 15
-#packet-alert-max: 15
-
-# IP Reputation
-#reputation-categories-file: /etc/suricata/iprep/categories.txt
-#default-reputation-path: /etc/suricata/iprep
-#reputation-files:
-# - reputation.list
-
-# When run with the option --engine-analysis, the engine will read each of
-# the parameters below, and print reports for each of the enabled sections
-# and exit. The reports are printed to a file in the default log dir
-# given by the parameter "default-log-dir", with engine reporting
-# subsection below printing reports in its own report file.
-engine-analysis:
- # enables printing reports for fast-pattern for every rule.
- rules-fast-pattern: yes
- # enables printing reports for each rule
- rules: yes
-
-#recursion and match limits for PCRE where supported
-pcre:
- match-limit: 3500
- match-limit-recursion: 1500
-
-##
-## Advanced Traffic Tracking and Reconstruction Settings
-##
-
-# Host specific policies for defragmentation and TCP stream
-# reassembly. The host OS lookup is done using a radix tree, just
-# like a routing table so the most specific entry matches.
-host-os-policy:
- # Make the default policy windows.
- windows: [0.0.0.0/0]
- bsd: []
- bsd-right: []
- old-linux: []
- linux: []
- old-solaris: []
- solaris: []
- hpux10: []
- hpux11: []
- irix: []
- macos: []
- vista: []
- windows2k3: []
-
-# Defrag settings:
-
-# The memcap-policy value can be "drop-flow", "pass-flow", "bypass",
-# "drop-packet", "pass-packet", "reject" or "ignore" (which is the default).
-defrag:
- memcap: 32mb
- # memcap-policy: ignore
- hash-size: 65536
- trackers: 65535 # number of defragmented flows to follow
- max-frags: 65535 # number of fragments to keep (higher than trackers)
- prealloc: yes
- timeout: 60
-
-# Enable defrag per host settings
-# host-config:
-#
-# - dmz:
-# timeout: 30
-# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
-#
-# - lan:
-# timeout: 45
-# address:
-# - 192.168.0.0/24
-# - 192.168.10.0/24
-# - 172.16.14.0/24
-
-# Flow settings:
-# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
-# for flow allocation inside the engine. You can change this value to allow
-# more memory usage for flows.
-# The hash-size determines the size of the hash used to identify flows inside
-# the engine, and by default the value is 65536.
-# At startup, the engine can preallocate a number of flows, to get better
-# performance. The number of flows preallocated is 10000 by default.
-# emergency-recovery is the percentage of flows that the engine needs to
-# prune before clearing the emergency state. The emergency state is activated
-# when the memcap limit is reached, allowing new flows to be created, but
-# pruning them with the emergency timeouts (they are defined below).
-# If the memcap is reached, the engine will try to prune flows
-# with the default timeouts. If it doesn't find a flow to prune, it will set
-# the emergency bit and it will try again with more aggressive timeouts.
-# If that doesn't work, then it will try to kill the oldest flows using
-# last time seen flows.
-# The memcap can be specified in kb, mb, gb. Just a number indicates it's
-# in bytes.
-# The memcap-policy can be "drop-flow", "pass-flow", "bypass", "drop-packet",
-# "pass-packet", "reject" or "ignore" (which is the default).
-
-flow:
- memcap: 128mb
- #memcap-policy: ignore
- hash-size: 65536
- prealloc: 10000
- emergency-recovery: 30
- #managers: 1 # default to one flow manager
- #recyclers: 1 # default to one flow recycler thread
-
-# This option controls the use of VLAN ids in the flow (and defrag)
-# hashing. Normally this should be enabled, but in some (broken)
-# setups where both sides of a flow are not tagged with the same VLAN
-# tag, we can ignore the VLAN id's in the flow hashing.
-vlan:
- use-for-tracking: true
-
-# Specific timeouts for flows. Here you can specify the timeouts that the
-# active flows will wait to transit from the current state to another, on each
-# protocol. The value of "new" determines the seconds to wait after a handshake or
-# stream startup before the engine frees the data of that flow it doesn't
-# change the state to established (usually if we don't receive more packets
-# of that flow). The value of "established" is the amount of
-# seconds that the engine will wait to free the flow if that time elapses
-# without receiving new packets or closing the connection. "closed" is the
-# amount of time to wait after a flow is closed (usually zero). "bypassed"
-# timeout controls locally bypassed flows. For these flows we don't do any other
-# tracking. If no packets have been seen after this timeout, the flow is discarded.
-#
-# There's an emergency mode that will become active under attack circumstances,
-# making the engine to check flow status faster. This configuration variables
-# use the prefix "emergency-" and work similar as the normal ones.
-# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
-# icmp.
-
-flow-timeouts:
-
- default:
- new: 30
- established: 300
- closed: 0
- bypassed: 100
- emergency-new: 10
- emergency-established: 100
- emergency-closed: 0
- emergency-bypassed: 50
- tcp:
- new: 60
- established: 600
- closed: 60
- bypassed: 100
- emergency-new: 5
- emergency-established: 100
- emergency-closed: 10
- emergency-bypassed: 50
- udp:
- new: 30
- established: 300
- bypassed: 100
- emergency-new: 10
- emergency-established: 100
- emergency-bypassed: 50
- icmp:
- new: 30
- established: 300
- bypassed: 100
- emergency-new: 10
- emergency-established: 100
- emergency-bypassed: 50
-
-# Stream engine settings. Here the TCP stream tracking and reassembly
-# engine is configured.
-#
-# stream:
-# memcap: 64mb # Can be specified in kb, mb, gb. Just a
-# # number indicates it's in bytes.
-# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
-# # "drop-packet", "pass-packet", "reject" or
-# # "ignore" default is "ignore"
-# checksum-validation: yes # To validate the checksum of received
-# # packet. If csum validation is specified as
-# # "yes", then packets with invalid csum values will not
-# # be processed by the engine stream/app layer.
-# # Warning: locally generated traffic can be
-# # generated without checksum due to hardware offload
-# # of checksum. You can control the handling of checksum
-# # on a per-interface basis via the 'checksum-checks'
-# # option
-# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread
-# midstream: false # don't allow midstream session pickups
-# midstream-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
-# # "drop-packet", "pass-packet", "reject" or
-# # "ignore" default is "ignore"
-# async-oneside: false # don't enable async stream handling
-# inline: no # stream inline mode
-# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine
-# max-synack-queued: 5 # Max different SYN/ACKs to queue
-# bypass: no # Bypass packets when stream.reassembly.depth is reached.
-# # Warning: first side to reach this triggers
-# # the bypass.
-#
-# reassembly:
-# memcap: 256mb # Can be specified in kb, mb, gb. Just a number
-# # indicates it's in bytes.
-# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
-# # "drop-packet", "pass-packet", "reject" or
-# # "ignore" default is "ignore"
-# depth: 1mb # Can be specified in kb, mb, gb. Just a number
-# # indicates it's in bytes.
-# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
-# # this size. Can be specified in kb, mb,
-# # gb. Just a number indicates it's in bytes.
-# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
-# # this size. Can be specified in kb, mb,
-# # gb. Just a number indicates it's in bytes.
-# randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
-# # This lowers the risk of some evasion techniques but could lead
-# # to detection change between runs. It is set to 'yes' by default.
-# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
-# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
-# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
-# # calculation for toclient-chunk-size.
-# # Default value of randomize-chunk-range is 10.
-#
-# raw: yes # 'Raw' reassembly enabled or disabled.
-# # raw is for content inspection by detection
-# # engine.
-#
-# segment-prealloc: 2048 # number of segments preallocated per thread
-#
-# check-overlap-different-data: true|false
-# # check if a segment contains different data
-# # than what we've already seen for that
-# # position in the stream.
-# # This is enabled automatically if inline mode
-# # is used or when stream-event:reassembly_overlap_different_data;
-# # is used in a rule.
-#
-stream:
- memcap: 64mb
- #memcap-policy: ignore
- checksum-validation: yes # reject incorrect csums
- #midstream: false
- #midstream-policy: ignore
- inline: auto # auto will use inline mode in IPS mode, yes or no set it statically
- reassembly:
- memcap: 256mb
- #memcap-policy: ignore
- depth: 1mb # reassemble 1mb into a stream
- toserver-chunk-size: 2560
- toclient-chunk-size: 2560
- randomize-chunk-size: yes
- #randomize-chunk-range: 10
- #raw: yes
- #segment-prealloc: 2048
- #check-overlap-different-data: true
-
-# Host table:
-#
-# Host table is used by the tagging and per host thresholding subsystems.
-#
-host:
- hash-size: 4096
- prealloc: 1000
- memcap: 32mb
-
-# IP Pair table:
-#
-# Used by xbits 'ippair' tracking.
-#
-#ippair:
-# hash-size: 4096
-# prealloc: 1000
-# memcap: 32mb
-
-# Decoder settings
-
-decoder:
- # Teredo decoder is known to not be completely accurate
- # as it will sometimes detect non-teredo as teredo.
- teredo:
- enabled: true
- # ports to look for Teredo. Max 4 ports. If no ports are given, or
- # the value is set to 'any', Teredo detection runs on _all_ UDP packets.
- ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'.
-
- # VXLAN decoder is assigned to up to 4 UDP ports. By default only the
- # IANA assigned port 4789 is enabled.
- vxlan:
- enabled: true
- ports: $VXLAN_PORTS # syntax: '[8472, 4789]' or '4789'.
-
- # VNTag decode support
- vntag:
- enabled: false
-
- # Geneve decoder is assigned to up to 4 UDP ports. By default only the
- # IANA assigned port 6081 is enabled.
- geneve:
- enabled: true
- ports: $GENEVE_PORTS # syntax: '[6081, 1234]' or '6081'.
-
- # maximum number of decoder layers for a packet
- # max-layers: 16
-
-##
-## Performance tuning and profiling
-##
-
-# The detection engine builds internal groups of signatures. The engine
-# allows us to specify the profile to use for them, to manage memory in an
-# efficient way keeping good performance. For the profile keyword you
-# can use the words "low", "medium", "high" or "custom". If you use custom,
-# make sure to define the values in the "custom-values" section.
-# Usually you would prefer medium/high/low.
-#
-# "sgh mpm-context", indicates how the staging should allot mpm contexts for
-# the signature groups. "single" indicates the use of a single context for
-# all the signature group heads. "full" indicates a mpm-context for each
-# group head. "auto" lets the engine decide the distribution of contexts
-# based on the information the engine gathers on the patterns from each
-# group head.
-#
-# The option inspection-recursion-limit is used to limit the recursive calls
-# in the content inspection code. For certain payload-sig combinations, we
-# might end up taking too much time in the content inspection code.
-# If the argument specified is 0, the engine uses an internally defined
-# default limit. When a value is not specified, there are no limits on the recursion.
-detect:
- profile: medium
- custom-values:
- toclient-groups: 3
- toserver-groups: 25
- sgh-mpm-context: auto
- inspection-recursion-limit: 3000
- # If set to yes, the loading of signatures will be made after the capture
- # is started. This will limit the downtime in IPS mode.
- #delayed-detect: yes
-
- prefilter:
- # default prefiltering setting. "mpm" only creates MPM/fast_pattern
- # engines. "auto" also sets up prefilter engines for other keywords.
- # Use --list-keywords=all to see which keywords support prefiltering.
- default: mpm
-
- # the grouping values above control how many groups are created per
- # direction. Port whitelisting forces that port to get its own group.
- # Very common ports will benefit, as well as ports with many expensive
- # rules.
- grouping:
- #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
- #udp-whitelist: 53, 135, 5060
-
- profiling:
- # Log the rules that made it past the prefilter stage, per packet
- # default is off. The threshold setting determines how many rules
- # must have made it past pre-filter for that rule to trigger the
- # logging.
- #inspect-logging-threshold: 200
- grouping:
- dump-to-disk: false
- include-rules: false # very verbose
- include-mpm-stats: false
-
-# Select the multi pattern algorithm you want to run for scan/search the
-# in the engine.
-#
-# The supported algorithms are:
-# "ac" - Aho-Corasick, default implementation
-# "ac-bs" - Aho-Corasick, reduced memory implementation
-# "ac-ks" - Aho-Corasick, "Ken Steele" variant
-# "hs" - Hyperscan, available when built with Hyperscan support
-#
-# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
-# available, "ac" otherwise.
-#
-# The mpm you choose also decides the distribution of mpm contexts for
-# signature groups, specified by the conf - "detect.sgh-mpm-context".
-# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
-# to be set to "single", because of ac's memory requirements, unless the
-# ruleset is small enough to fit in memory, in which case one can
-# use "full" with "ac". The rest of the mpms can be run in "full" mode.
-
-mpm-algo: auto
-
-# Select the matching algorithm you want to use for single-pattern searches.
-#
-# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
-# available if Suricata has been built with Hyperscan support).
-#
-# The default of "auto" will use "hs" if available, otherwise "bm".
-
-spm-algo: auto
-
-# Suricata is multi-threaded. Here the threading can be influenced.
-threading:
- set-cpu-affinity: no
- # Tune cpu affinity of threads. Each family of threads can be bound
- # to specific CPUs.
- #
- # These 2 apply to the all runmodes:
- # management-cpu-set is used for flow timeout handling, counters
- # worker-cpu-set is used for 'worker' threads
- #
- # Additionally, for autofp these apply:
- # receive-cpu-set is used for capture threads
- # verdict-cpu-set is used for IPS verdict threads
- #
- cpu-affinity:
- - management-cpu-set:
- cpu: [ 0 ] # include only these CPUs in affinity settings
- - receive-cpu-set:
- cpu: [ 0 ] # include only these CPUs in affinity settings
- - worker-cpu-set:
- cpu: [ "all" ]
- mode: "exclusive"
- # Use explicitly 3 threads and don't compute number by using
- # detect-thread-ratio variable:
- # threads: 3
- prio:
- low: [ 0 ]
- medium: [ "1-2" ]
- high: [ 3 ]
- default: "medium"
- #- verdict-cpu-set:
- # cpu: [ 0 ]
- # prio:
- # default: "high"
- #
- # By default Suricata creates one "detect" thread per available CPU/CPU core.
- # This setting allows controlling this behaviour. A ratio setting of 2 will
- # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
- # will result in 4 detect threads. If values below 1 are used, less threads
- # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
- # thread being created. Regardless of the setting at a minimum 1 detect
- # thread will always be created.
- #
- detect-thread-ratio: 1.0
- #
- # By default, the per-thread stack size is left to its default setting. If
- # the default thread stack size is too small, use the following configuration
- # setting to change the size. Note that if any thread's stack size cannot be
- # set to this value, a fatal error occurs.
- #
- # Generally, the per-thread stack-size should not exceed 8MB.
- #stack-size: 8mb
-
-# Luajit has a strange memory requirement, its 'states' need to be in the
-# first 2G of the process' memory.
-#
-# 'luajit.states' is used to control how many states are preallocated.
-# State use: per detect script: 1 per detect thread. Per output script: 1 per
-# script.
-luajit:
- states: 128
-
-# Profiling settings. Only effective if Suricata has been built with
-# the --enable-profiling configure flag.
-#
-profiling:
- # Run profiling for every X-th packet. The default is 1, which means we
- # profile every packet. If set to 1000, one packet is profiled for every
- # 1000 received.
- #sample-rate: 1000
-
- # rule profiling
- rules:
-
- # Profiling can be disabled here, but it will still have a
- # performance impact if compiled in.
- enabled: yes
- filename: rule_perf.log
- append: yes
-
- # Sort options: ticks, avgticks, checks, matches, maxticks
- # If commented out all the sort options will be used.
- #sort: avgticks
-
- # Limit the number of sids for which stats are shown at exit (per sort).
- limit: 10
-
- # output to json
- json: yes
-
- # per keyword profiling
- keywords:
- enabled: yes
- filename: keyword_perf.log
- append: yes
-
- prefilter:
- enabled: yes
- filename: prefilter_perf.log
- append: yes
-
- # per rulegroup profiling
- rulegroups:
- enabled: yes
- filename: rule_group_perf.log
- append: yes
-
- # packet profiling
- packets:
-
- # Profiling can be disabled here, but it will still have a
- # performance impact if compiled in.
- enabled: yes
- filename: packet_stats.log
- append: yes
-
- # per packet csv output
- csv:
-
- # Output can be disabled here, but it will still have a
- # performance impact if compiled in.
- enabled: no
- filename: packet_stats.csv
-
- # profiling of locking. Only available when Suricata was built with
- # --enable-profiling-locks.
- locks:
- enabled: no
- filename: lock_stats.log
- append: yes
-
- pcap-log:
- enabled: no
- filename: pcaplog_stats.log
- append: yes
-
-##
-## Netfilter integration
-##
-
-# When running in NFQ inline mode, it is possible to use a simulated
-# non-terminal NFQUEUE verdict.
-# This permits sending all needed packet to Suricata via this rule:
-# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
-# And below, you can have your standard filtering ruleset. To activate
-# this mode, you need to set mode to 'repeat'
-# If you want a packet to be sent to another queue after an ACCEPT decision
-# set the mode to 'route' and set next-queue value.
-# On Linux >= 3.1, you can set batchcount to a value > 1 to improve performance
-# by processing several packets before sending a verdict (worker runmode only).
-# On Linux >= 3.6, you can set the fail-open option to yes to have the kernel
-# accept the packet if Suricata is not able to keep pace.
-# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
-# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
-# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
-# directly accept all packets of a flow once a packet has been marked.
-nfq:
-# mode: accept
-# repeat-mark: 1
-# repeat-mask: 1
-# bypass-mark: 1
-# bypass-mask: 1
-# route-queue: 2
-# batchcount: 20
-# fail-open: yes
-
-#nflog support
-nflog:
- # netlink multicast group
- # (the same as the iptables --nflog-group param)
- # Group 0 is used by the kernel, so you can't use it
- - group: 2
- # netlink buffer size
- buffer-size: 18432
- # put default value here
- - group: default
- # set number of packets to queue inside kernel
- qthreshold: 1
- # set the delay before flushing packet in the kernel's queue
- qtimeout: 100
- # netlink max buffer size
- max-size: 20000
-
-##
-## Advanced Capture Options
-##
-
-# General settings affecting packet capture
-capture:
- # disable NIC offloading. It's restored when Suricata exits.
- # Enabled by default.
- #disable-offloading: false
- #
- # disable checksum validation. Same as setting '-k none' on the
- # commandline.
- #checksum-validation: none
-
-# Netmap support
-#
-# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which has
-# built-in Netmap support or compile and install the Netmap module and appropriate
-# NIC driver for your Linux system.
-# To reach maximum throughput disable all receive-, segmentation-,
-# checksum- offloading on your NIC (using ethtool or similar).
-# Disabling TX checksum offloading is *required* for connecting OS endpoint
-# with NIC endpoint.
-# You can find more information at https://github.com/luigirizzo/netmap
-#
-netmap:
- - interface: default
-
-# PF_RING configuration: for use with native PF_RING support
-# for more info see http://www.ntop.org/products/pf_ring/
-pfring:
- - interface: default
- #threads: 2
-
-# For FreeBSD ipfw(8) divert(4) support.
-# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
-# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
-# Additionally, you need to have an ipfw rule for the engine to see
-# the packets from ipfw. For Example:
-#
-# ipfw add 100 divert 8000 ip from any to any
-#
-# N.B. This example uses "8000" -- this number must mach the values
-# you passed on the command line, i.e., -d 8000
-#
-ipfw:
-
- # Reinject packets at the specified ipfw rule number. This config
- # option is the ipfw rule number AT WHICH rule processing continues
- # in the ipfw processing system after the engine has finished
- # inspecting the packet for acceptance. If no rule number is specified,
- # accepted packets are reinjected at the divert rule which they entered
- # and IPFW rule processing continues. No check is done to verify
- # this will rule makes sense so care must be taken to avoid loops in ipfw.
- #
- ## The following example tells the engine to reinject packets
- # back into the ipfw firewall AT rule number 5500:
- #
- # ipfw-reinjection-rule-number: 5500
-
-
-napatech:
- # When use_all_streams is set to "yes" the initialization code will query
- # the Napatech service for all configured streams and listen on all of them.
- # When set to "no" the streams config array will be used.
- #
- # This option necessitates running the appropriate NTPL commands to create
- # the desired streams prior to running Suricata.
- #use-all-streams: no
-
- # The streams to listen on when auto-config is disabled or when and threading
- # cpu-affinity is disabled. This can be either:
- # an individual stream (e.g. streams: [0])
- # or
- # a range of streams (e.g. streams: ["0-3"])
- #
- streams: ["0-3"]
-
- # Stream stats can be enabled to provide fine grain packet and byte counters
- # for each thread/stream that is configured.
- #
- enable-stream-stats: no
-
- # When auto-config is enabled the streams will be created and assigned
- # automatically to the NUMA node where the thread resides. If cpu-affinity
- # is enabled in the threading section. Then the streams will be created
- # according to the number of worker threads specified in the worker-cpu-set.
- # Otherwise, the streams array is used to define the streams.
- #
- # This option is intended primarily to support legacy configurations.
- #
- # This option cannot be used simultaneously with either "use-all-streams"
- # or "hardware-bypass".
- #
- auto-config: yes
-
- # Enable hardware level flow bypass.
- #
- hardware-bypass: yes
-
- # Enable inline operation. When enabled traffic arriving on a given port is
- # automatically forwarded out its peer port after analysis by Suricata.
- #
- inline: no
-
- # Ports indicates which Napatech ports are to be used in auto-config mode.
- # these are the port IDs of the ports that will be merged prior to the
- # traffic being distributed to the streams.
- #
- # When hardware-bypass is enabled the ports must be configured as a segment.
- # specify the port(s) on which upstream and downstream traffic will arrive.
- # This information is necessary for the hardware to properly process flows.
- #
- # When using a tap configuration one of the ports will receive inbound traffic
- # for the network and the other will receive outbound traffic. The two ports on a
- # given segment must reside on the same network adapter.
- #
- # When using a SPAN-port configuration the upstream and downstream traffic
- # arrives on a single port. This is configured by setting the two sides of the
- # segment to reference the same port. (e.g. 0-0 to configure a SPAN port on
- # port 0).
- #
- # port segments are specified in the form:
- # ports: [0-1,2-3,4-5,6-6,7-7]
- #
- # For legacy systems when hardware-bypass is disabled this can be specified in any
- # of the following ways:
- #
- # a list of individual ports (e.g. ports: [0,1,2,3])
- #
- # a range of ports (e.g. ports: [0-3])
- #
- # "all" to indicate that all ports are to be merged together
- # (e.g. ports: [all])
- #
- # This parameter has no effect if auto-config is disabled.
- #
- ports: [0-1,2-3]
-
- # When auto-config is enabled the hashmode specifies the algorithm for
- # determining to which stream a given packet is to be delivered.
- # This can be any valid Napatech NTPL hashmode command.
- #
- # The most common hashmode commands are: hash2tuple, hash2tuplesorted,
- # hash5tuple, hash5tuplesorted and roundrobin.
- #
- # See Napatech NTPL documentation other hashmodes and details on their use.
- #
- # This parameter has no effect if auto-config is disabled.
- #
- hashmode: hash5tuplesorted
-
-##
-## Configure Suricata to load Suricata-Update managed rules.
-##
-
-# As VyOS leverages suricata-update, the default rule path points to the
-# generated rules instead of the built-in rules.
-#
-# default-rule-path: /etc/suricata/rules
-default-rule-path: /var/lib/suricata/rules
-
-rule-files:
- - suricata.rules
-
-##
-## Auxiliary configuration files.
-##
-
-# As VyOS leverages suricata-update, the classification file points to the
-# generated classification instead of the built-in one.
-#
-# classification-file: /etc/suricata/classification.config
-classification-file: /var/lib/suricata/rules/classification.config
-reference-config-file: /etc/suricata/reference.config
-# threshold-file: /etc/suricata/threshold.config
-
-##
-## Include other configs
-##
-
-# Includes: Files included here will be handled as if they were in-lined
-# in this configuration file. Files with relative pathnames will be
-# searched for in the same directory as this configuration file. You may
-# use absolute pathnames too.
-# You can specify more than 2 configuration files, if needed.
-#include: include1.yaml
-#include: include2.yaml
diff --git a/data/templates/ids/suricata_logrotate.j2 b/data/templates/ids/suricata_logrotate.j2
deleted file mode 100644
index 62773fc68..000000000
--- a/data/templates/ids/suricata_logrotate.j2
+++ /dev/null
@@ -1,17 +0,0 @@
-{% for filename in [(log.eve.filename | default("eve.json"))] %}
-{{ filename if filename.startswith("/") else ("/var/log/suricata/" + filename) }}
-{% endfor %}{
- weekly
- dateext
- dateformat _%Y-%m-%d_%H-%M-%S
- maxsize 10M
- rotate 10
- missingok
- nocompress
- nocreate
- nomail
- sharedscripts
- postrotate
- /bin/kill -HUP `cat /run/suricata/suricata.pid 2>/dev/null` 2>/dev/null || true
- endscript
-}
diff --git a/debian/control b/debian/control
index 2e99bdc28..329ed09eb 100644
--- a/debian/control
+++ b/debian/control
@@ -164,8 +164,6 @@ Depends:
# End "service dns dynamic"
# # For "service ids"
fastnetmon [amd64],
- suricata,
- suricata-update,
# End "service ids"
# # For "service ndp-proxy"
ndppd,
diff --git a/interface-definitions/service_suricata.xml.in b/interface-definitions/service_suricata.xml.in
deleted file mode 100644
index e0159e2ba..000000000
--- a/interface-definitions/service_suricata.xml.in
+++ /dev/null
@@ -1,238 +0,0 @@
-<?xml version="1.0"?>
-<interfaceDefinition>
- <node name="service">
- <children>
- <node name="suricata" owner="${vyos_conf_scripts_dir}/service_suricata.py">
- <properties>
- <help>Network IDS, IPS and Security Monitoring</help>
- <priority>740</priority>
- </properties>
- <children>
- #include <include/generic-interface-multi.xml.i>
- <tagNode name="address-group">
- <properties>
- <help>Address group name</help>
- <constraint>
- <regex>[a-z0-9-]+</regex>
- </constraint>
- </properties>
- <children>
- <leafNode name="address">
- <properties>
- <help>IP address or subnet</help>
- <valueHelp>
- <format>ipv4</format>
- <description>IPv4 address to match</description>
- </valueHelp>
- <valueHelp>
- <format>ipv6</format>
- <description>IPv6 address to match</description>
- </valueHelp>
- <valueHelp>
- <format>ipv4net</format>
- <description>IPv4 prefix to match</description>
- </valueHelp>
- <valueHelp>
- <format>ipv6net</format>
- <description>IPv6 prefix to match</description>
- </valueHelp>
- <valueHelp>
- <format>!ipv4</format>
- <description>Exclude the specified IPv4 address from matches</description>
- </valueHelp>
- <valueHelp>
- <format>!ipv6</format>
- <description>Exclude the specified IPv6 address from matches</description>
- </valueHelp>
- <valueHelp>
- <format>!ipv4net</format>
- <description>Exclude the specified IPv6 prefix from matches</description>
- </valueHelp>
- <valueHelp>
- <format>!ipv6net</format>
- <description>Exclude the specified IPv6 prefix from matches</description>
- </valueHelp>
- <constraint>
- <validator name="ipv4-address"/>
- <validator name="ipv6-address"/>
- <validator name="ipv4-prefix"/>
- <validator name="ipv6-prefix"/>
- <validator name="ipv4-address-exclude"/>
- <validator name="ipv6-address-exclude"/>
- <validator name="ipv4-prefix-exclude"/>
- <validator name="ipv6-prefix-exclude"/>
- </constraint>
- <multi/>
- </properties>
- </leafNode>
- <leafNode name="group">
- <properties>
- <help>Address group</help>
- <completionHelp>
- <path>service ids suricata address-group</path>
- </completionHelp>
- <valueHelp>
- <format>txt</format>
- <description>Address group to match</description>
- </valueHelp>
- <valueHelp>
- <format>!txt</format>
- <description>Exclude the specified address group from matches</description>
- </valueHelp>
- <constraint>
- <regex>!?[a-z0-9-]+</regex>
- </constraint>
- <multi/>
- </properties>
- </leafNode>
- </children>
- </tagNode>
- <tagNode name="port-group">
- <properties>
- <help>Port group name</help>
- <constraint>
- <regex>[a-z0-9-]+</regex>
- </constraint>
- </properties>
- <children>
- <leafNode name="port">
- <properties>
- <help>Port number</help>
- <valueHelp>
- <format>u32:1-65535</format>
- <description>Numeric port to match</description>
- </valueHelp>
- <valueHelp>
- <format>!u32:1-65535</format>
- <description>Numeric port to exclude from matches</description>
- </valueHelp>
- <valueHelp>
- <format>start-end</format>
- <description>Numbered port range (e.g. 1001-1005) to match</description>
- </valueHelp>
- <valueHelp>
- <format>!start-end</format>
- <description>Numbered port range (e.g. !1001-1005) to exclude from matches</description>
- </valueHelp>
- <constraint>
- <validator name="port-range"/>
- <validator name="port-range-exclude"/>
- </constraint>
- <multi/>
- </properties>
- </leafNode>
- <leafNode name="group">
- <properties>
- <help>Port group</help>
- <completionHelp>
- <path>service ids suricata port-group</path>
- </completionHelp>
- <valueHelp>
- <format>txt</format>
- <description>Port group to match</description>
- </valueHelp>
- <valueHelp>
- <format>!txt</format>
- <description>Exclude the specified port group from matches</description>
- </valueHelp>
- <constraint>
- <regex>!?[a-z0-9-]+</regex>
- </constraint>
- <multi/>
- </properties>
- </leafNode>
- </children>
- </tagNode>
- <node name="log">
- <properties>
- <help>Suricata log outputs</help>
- </properties>
- <children>
- <node name="eve">
- <properties>
- <help>Extensible Event Format (EVE)</help>
- </properties>
- <children>
- <leafNode name="filetype">
- <properties>
- <help>EVE logging destination</help>
- <completionHelp>
- <list>regular syslog</list>
- </completionHelp>
- <valueHelp>
- <format>regular</format>
- <description>Log to filename</description>
- </valueHelp>
- <valueHelp>
- <format>syslog</format>
- <description>Log to syslog</description>
- </valueHelp>
- <constraint>
- <regex>(regular|syslog)</regex>
- </constraint>
- </properties>
- <defaultValue>regular</defaultValue>
- </leafNode>
- <leafNode name="filename">
- <properties>
- <help>Log file</help>
- <valueHelp>
- <format>filename</format>
- <description>File name in default Suricata log directory</description>
- </valueHelp>
- <valueHelp>
- <format>/path</format>
- <description>Absolute file path</description>
- </valueHelp>
- </properties>
- <defaultValue>eve.json</defaultValue>
- </leafNode>
- <leafNode name="type">
- <properties>
- <help>Log types</help>
- <completionHelp>
- <list>alert anomaly drop files http dns tls smtp dnp3 ftp rdp nfs smb tftp ikev2 dcerpc krb5 snmp rfb sip dhcp ssh mqtt http2 flow netflow</list>
- </completionHelp>
- <valueHelp>
- <format>alert</format>
- <description>Record events for rule matches</description>
- </valueHelp>
- <valueHelp>
- <format>anomaly</format>
- <description>Record unexpected conditions such as truncated packets, packets with invalid IP/UDP/TCP length values, and other events that render the packet invalid for further processing or describe unexpected behavior on an established stream</description>
- </valueHelp>
- <valueHelp>
- <format>drop</format>
- <description>Record events for dropped packets</description>
- </valueHelp>
- <valueHelp>
- <format>file</format>
- <description>Record file details (e.g., MD5) for files extracted from application protocols (e.g., HTTP)</description>
- </valueHelp>
- <valueHelp>
- <format>application (http, dns, tls, ...)</format>
- <description>Record application-level transactions</description>
- </valueHelp>
- <valueHelp>
- <format>flow</format>
- <description>Record bi-directional flows</description>
- </valueHelp>
- <valueHelp>
- <format>netflow</format>
- <description>Record uni-directional flows</description>
- </valueHelp>
- <constraint>
- <regex>(alert|anomaly|http|dns|tls|files|drop|smtp|dnp3|ftp|rdp|nfs|smb|tftp|ikev2|dcerpc|krb5|snmp|rfb|sip|dhcp|ssh|mqtt|http2|flow|netflow)</regex>
- </constraint>
- <multi/>
- </properties>
- </leafNode>
- </children>
- </node>
- </children>
- </node>
- </children>
- </node>
- </children>
- </node>
-</interfaceDefinition>
diff --git a/op-mode-definitions/suricata.xml.in b/op-mode-definitions/suricata.xml.in
deleted file mode 100644
index a5025afba..000000000
--- a/op-mode-definitions/suricata.xml.in
+++ /dev/null
@@ -1,23 +0,0 @@
-<?xml version="1.0"?>
-<interfaceDefinition>
- <node name="update">
- <children>
- <node name="suricata">
- <properties>
- <help>Update Suricata</help>
- </properties>
- <command>if test -f /run/suricata/suricata.yaml; then sudo suricata-update --suricata-conf /run/suricata/suricata.yaml; sudo systemctl restart suricata; else echo "Service Suricata not configured"; fi </command>
- </node>
- </children>
- </node>
- <node name="restart">
- <children>
- <node name="suricata">
- <properties>
- <help>Restart Suricata service</help>
- </properties>
- <command>if systemctl is-active --quiet suricata; then sudo systemctl restart suricata.service; else echo "Service Suricata not configured"; fi</command>
- </node>
- </children>
- </node>
-</interfaceDefinition>
diff --git a/src/conf_mode/service_suricata.py b/src/conf_mode/service_suricata.py
deleted file mode 100755
index 69b369e0b..000000000
--- a/src/conf_mode/service_suricata.py
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright (C) 2024 VyOS maintainers and contributors
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 or later as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-import os
-
-from sys import exit
-
-from vyos.base import Warning
-from vyos.config import Config
-from vyos.template import render
-from vyos.utils.process import call
-from vyos import ConfigError
-from vyos import airbag
-airbag.enable()
-
-config_file = '/run/suricata/suricata.yaml'
-rotate_file = '/etc/logrotate.d/suricata'
-
-def get_config(config=None):
- if config:
- conf = config
- else:
- conf = Config()
- base = ['service', 'suricata']
-
- if not conf.exists(base):
- return None
-
- suricata = conf.get_config_dict(base, key_mangling=('-', '_'),
- get_first_key=True, with_recursive_defaults=True)
-
- return suricata
-
-# https://en.wikipedia.org/wiki/Topological_sorting#Depth-first_search
-def topological_sort(source):
- sorted_nodes = []
- permanent_marks = set()
- temporary_marks = set()
-
- def visit(n, v):
- if n in permanent_marks:
- return
- if n in temporary_marks:
- raise ConfigError('At least one cycle exists in the referenced groups')
-
- temporary_marks.add(n)
-
- for m in v.get('group', []):
- m = m.lstrip('!')
- if m not in source:
- raise ConfigError(f'Undefined referenced group "{m}"')
- visit(m, source[m])
-
- temporary_marks.remove(n)
- permanent_marks.add(n)
- sorted_nodes.append((n, v))
-
- while len(permanent_marks) < len(source):
- n = next(n for n in source.keys() if n not in permanent_marks)
- visit(n, source[n])
-
- return sorted_nodes
-
-def verify(suricata):
- if not suricata:
- return None
-
- if 'interface' not in suricata:
- raise ConfigError('No interfaces configured!')
-
- if 'address_group' not in suricata:
- raise ConfigError('No address-group configured!')
-
- if 'port_group' not in suricata:
- raise ConfigError('No port-group configured!')
-
- try:
- topological_sort(suricata['address_group'])
- except (ConfigError,StopIteration) as e:
- raise ConfigError(f'Invalid address-group: {e}')
-
- try:
- topological_sort(suricata['port_group'])
- except (ConfigError,StopIteration) as e:
- raise ConfigError(f'Invalid port-group: {e}')
-
-def generate(suricata):
- if not suricata:
- for file in [config_file, rotate_file]:
- if os.path.isfile(file):
- os.unlink(file)
-
- return None
-
- # Config-related formatters
- def to_var(s:str):
- return s.replace('-','_').upper()
-
- def to_val(s:str):
- return s.replace('-',':')
-
- def to_ref(s:str):
- if s[0] == '!':
- return '!$' + to_var(s[1:])
- return '$' + to_var(s)
-
- def to_config(kind:str):
- def format_group(group):
- (name, value) = group
- property = [to_val(property) for property in value.get(kind,[])]
- group = [to_ref(group) for group in value.get('group',[])]
- return (to_var(name), property + group)
- return format_group
-
- # Format the address group
- suricata['address_group'] = map(to_config('address'),
- topological_sort(suricata['address_group']))
-
- # Format the port group
- suricata['port_group'] = map(to_config('port'),
- topological_sort(suricata['port_group']))
-
- render(config_file, 'ids/suricata.j2', {'suricata': suricata})
- render(rotate_file, 'ids/suricata_logrotate.j2', suricata)
- return None
-
-def apply(suricata):
- systemd_service = 'suricata.service'
- if not suricata or 'interface' not in suricata:
- # Stop suricata service if removed
- call(f'systemctl stop {systemd_service}')
- else:
- Warning('To fetch the latest rules, use "update suricata"; '
- 'To periodically fetch the latest rules, '
- 'use the task scheduler!')
- call(f'systemctl restart {systemd_service}')
-
- return None
-
-if __name__ == '__main__':
- try:
- c = get_config()
- verify(c)
- generate(c)
- apply(c)
- except ConfigError as e:
- print(e)
- exit(1)
diff --git a/src/etc/systemd/system/suricata.service.d/10-override.conf b/src/etc/systemd/system/suricata.service.d/10-override.conf
deleted file mode 100644
index 781256cf5..000000000
--- a/src/etc/systemd/system/suricata.service.d/10-override.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-[Service]
-ExecStart=
-ExecStart=/usr/bin/suricata -D --af-packet -c /run/suricata/suricata.yaml --pidfile /run/suricata/suricata.pid
-PIDFile=
-PIDFile=/run/suricata/suricata.pid
-ExecReload=
-ExecReload=/usr/bin/suricatasc -c reload-rules /run/suricata/suricata.socket ; /bin/kill -HUP $MAINPID
-ExecStop=
-ExecStop=/usr/bin/suricatasc -c shutdown /run/suricata/suricata.socket