Merge branch 'pppoe-server-update' of github.com:c-po/vyos-1x into current

* 'pppoe-server-update' of github.com:c-po/vyos-1x:
  accel-ppp: T2314: use common tempplate for chap-secrets
  pppoe-server: T2314: migrate IPv6 to common CLI nodes with embeeded validation
  pppoe-server: T2313: bugfix Floating Point Exception
  pppoe-server: T2314: migrate RADIUS configuration to common CLI syntax
  vpn: l2tp: pptp: sstp: rename files to common pattern
  pppoe-server: T2314: migrate IPv4/IPv6 name-servers to common node
  vpn: l2tp: sstp: ease unlinking of configuration files
  pppoe-server: T2314: remove boilerplate code and adjust
  pppoe-server: T2185: migrate from SysVinit to systemd

19 files changed, 911 insertions, 918 deletions

diff --git a/data/templates/l2tp/chap-secrets.tmpl b/data/templates/accel-ppp/chap-secrets.tmpl
index dd00d7bd0..dd00d7bd0 100644
--- a/data/templates/l2tp/chap-secrets.tmpl
+++ b/data/templates/accel-ppp/chap-secrets.tmpl
diff --git a/data/templates/l2tp/l2tp.config.tmpl b/data/templates/accel-ppp/l2tp.config.tmpl
index ba78cadcd..ebe3aca29 100644
--- a/data/templates/l2tp/l2tp.config.tmpl
+++ b/data/templates/accel-ppp/l2tp.config.tmpl
@@ -124,7 +124,6 @@ ipv6=allow
 {% for p in client_ipv6_delegate_prefix %}
 delegate={{ p.prefix }},{{ p.mask }}
 {% endfor %}
-
 {% endif %}
 
 {% if client_ipv6_delegate_prefix %}
@@ -144,4 +143,3 @@ vendor={{ radius_shaper_vendor }}
 [cli]
 tcp=127.0.0.1:2004
 sessions-columns=ifname,username,calling-sid,ip,{{ ip6_column | join(',') }}{{ ',' if ip6_column }}rate-limit,type,comp,state,rx-bytes,tx-bytes,uptime
-
diff --git a/data/templates/accel-ppp/pppoe.config.tmpl b/data/templates/accel-ppp/pppoe.config.tmpl
new file mode 100644
index 000000000..325b75adc
--- /dev/null
+++ b/data/templates/accel-ppp/pppoe.config.tmpl
@@ -0,0 +1,203 @@
+
+### generated by accel_pppoe.py ###
+[modules]
+log_syslog
+pppoe
+{% if auth_mode == 'radius' %}
+radius
+{% endif %}
+ippool
+{% if ppp_ipv6 != 'deny' %}
+ipv6pool
+ipv6_nd
+ipv6_dhcp
+{% endif %}
+chap-secrets
+auth_pap
+auth_chap_md5
+auth_mschap_v1
+auth_mschap_v2
+shaper
+{% if snmp %}
+net-snmp
+{% endif %}
+{% if limits %}
+connlimit
+{% endif %}
+
+[core]
+thread-count={{ thread_cnt }}
+
+[log]
+syslog=accel-pppoe,daemon
+copy=1
+level=5
+
+{% if snmp == 'enable-ma' %}
+[snmp]
+master=1
+{% endif %}
+
+[client-ip-range]
+disable
+
+{% if ppp_gw %}
+[ip-pool]
+gw-ip-address={{ ppp_gw }}
+{% if client_ip_pool %}
+{{ client_ip_pool }}
+{% endif -%}
+{% if client_ip_subnets %}
+{% for subnet in client_ip_subnets %}
+{{ subnet }}
+{% endfor %}
+{% endif %}
+{% endif %}
+
+{% if client_ipv6_pool %}
+[ipv6-pool]
+{% for p in client_ipv6_pool %}
+{{ p.prefix }},{{ p.mask }}
+{% endfor %}
+{% for p in client_ipv6_delegate_prefix %}
+delegate={{ p.prefix }},{{ p.mask }}
+{% endfor %}
+{% endif %}
+
+{% if dnsv4 %}
+[dns]
+{% for dns in dnsv4 -%}
+dns{{ loop.index }}={{ dns }}
+{% endfor -%}
+{% endif %}
+
+{% if dnsv6 %}
+[ipv6-dns]
+{% for dns in dnsv6 -%}
+{{ dns }}
+{% endfor -%}
+{% endif %}
+
+{% if wins %}
+[wins]
+{% for server in wins -%}
+wins{{ loop.index }}={{ server }}
+{% endfor -%}
+{% endif %}
+
+{% if auth_mode == 'local' %}
+[chap-secrets]
+chap-secrets={{ chap_secrets_file }}
+{% elif auth_mode == 'radius' %}
+[radius]
+verbose=1
+{% for r in radius_server %}
+server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }}
+{% endfor -%}
+
+acct-timeout={{ radius_acct_tmo }}
+timeout={{ radius_timeout }}
+max-try={{ radius_max_try }}
+{% if radius_nas_id %}
+nas-identifier={{ radius_nas_id }}
+{% endif -%}
+{% if radius_nas_ip %}
+nas-ip-address={{ radius_nas_ip }}
+{% endif -%}
+{% if radius_source_address %}
+bind={{ radius_source_address }}
+{% endif -%}
+
+{% if radius_dynamic_author %}
+dae-server={{ radius_dynamic_author.server }}:{{ radius_dynamic_author.port }},{{ radius_dynamic_author.key }}
+{% endif -%}
+
+{% if radius_shaper_attr %}
+[shaper]
+verbose=1
+attr={{ radius_shaper_attr }}
+{% if radius_shaper_vendor %}
+vendor={{ radius_shaper_vendor }}
+{% endif -%}
+{% endif -%}
+{% endif %}
+
+[ppp]
+verbose=1
+check-ip=1
+{% if not sesscrtl == 'disable' %}
+single-session={{sesscrtl}}
+{% endif -%}
+{% if ppp_ccp %}
+ccp=1
+{% endif %}
+{% if ppp_min_mtu %}
+min-mtu={{ ppp_min_mtu }}
+{% else %}
+min-mtu={{ mtu }}
+{% endif %}
+{% if ppp_mru %}
+mru={{ ppp_mru }}
+{% endif %}
+mppe={{ ppp_mppe }}
+lcp-echo-interval={{ ppp_echo_interval }}
+lcp-echo-timeout={{ ppp_echo_timeout }}
+lcp-echo-failure={{ ppp_echo_failure }}
+{% if ppp_ipv4 %}
+ipv4={{ ppp_ipv4 }}
+{% endif %}
+{% if client_ipv6_pool %}
+ipv6=allow
+{% endif %}
+
+{% if ppp_ipv6 %}
+ipv6={{ ppp_ipv6 }}
+{% if ppp_ipv6_intf_id %}
+ipv6-intf-id={{ ppp_ipv6_intf_id }}
+{% endif %}
+{% if ppp_ipv6_peer_intf_id %}
+ipv6-peer-intf-id={{ ppp_ipv6_peer_intf_id }}
+{% endif %}
+{% if ppp_ipv6_accept_peer_intf_id %}
+ipv6-accept-peer-intf-id={{ ppp_ipv6_accept_peer_intf_id }}
+{% endif %}
+{% endif %}
+mtu={{ mtu }}
+
+[pppoe]
+verbose=1
+ac-name={{ concentrator }}
+
+{% if interfaces %}
+{% for interface in interfaces %}
+interface={{ interface.name }}
+{% if interface.vlans %}
+vlan-mon={{ interface.name }},{{ interface.vlans | join(',') }}
+interface=re:{{ interface.name }}\.\d+
+{% endif %}
+{% endfor -%}
+{% endif -%}
+
+{% if svc_name %}
+service-name={{ svc_name|join(',') }}
+{% endif -%}
+
+{% if pado_delay %}
+pado-delay={{ pado_delay }}
+{% endif %}
+
+{% if limits_burst or limits_connections or limits_connections %}
+[connlimit]
+{% if limits_connections %}
+limit={{ limits_connections }}
+{% endif %}
+{% if limits_burst %}
+burst={{ limits_burst }}
+{% endif %}
+{% if limits_timeout %}
+timeout={{ limits_timeout }}
+{% endif %}
+{% endif %}
+
+[cli]
+tcp=127.0.0.1:2001
diff --git a/data/templates/sstp/sstp.config.tmpl b/data/templates/accel-ppp/sstp.config.tmpl
index acdb6c76b..c3dc83429 100644
--- a/data/templates/sstp/sstp.config.tmpl
+++ b/data/templates/accel-ppp/sstp.config.tmpl
@@ -112,4 +112,3 @@ vendor={{ radius_shaper_vendor }}
 
 [cli]
 tcp=127.0.0.1:2005
-
diff --git a/data/templates/pppoe-server/chap-secrets.tmpl b/data/templates/pppoe-server/chap-secrets.tmpl
deleted file mode 100644
index 907ac6ed7..000000000
--- a/data/templates/pppoe-server/chap-secrets.tmpl
+++ /dev/null
@@ -1,10 +0,0 @@
-# username  server  password  acceptable local IP addresses   shaper
-{% for user in authentication['local-users'] %}
-{% if authentication['local-users'][user]['state'] == 'enabled' %}
-{% if (authentication['local-users'][user]['upload']) and (authentication['local-users'][user]['download']) %}
-{{ "%-12s" | format(user) }} * {{ "%-16s" | format(authentication['local-users'][user]['passwd']) }} {{ "%-16s" | format(authentication['local-users'][user]['ip']) }} {{ authentication['local-users'][user]['download'] }} / {{ authentication['local-users'][user]['upload'] }}
-{% else %}
-{{ "%-12s" | format(user) }} * {{ "%-16s" | format(authentication['local-users'][user]['passwd']) }} {{ "%-16s" | format(authentication['local-users'][user]['ip']) }}
-{% endif %}
-{% endif %}
-{% endfor %}
diff --git a/data/templates/pppoe-server/pppoe.config.tmpl b/data/templates/pppoe-server/pppoe.config.tmpl
deleted file mode 100644
index d44c0aa93..000000000
--- a/data/templates/pppoe-server/pppoe.config.tmpl
+++ /dev/null
@@ -1,228 +0,0 @@
-
-### generated by accel_pppoe.py ###
-[modules]
-log_syslog
-pppoe
-{% if authentication['mode'] == 'radius' %}
-radius
-{% endif %}
-ippool
-{% if ppp_options['ipv6'] != 'deny' %}
-ipv6pool
-ipv6_nd
-ipv6_dhcp
-{% endif %}
-chap-secrets
-auth_pap
-auth_chap_md5
-auth_mschap_v1
-auth_mschap_v2
-#pppd_compat
-shaper
-{% if snmp == 'enable' or snmp == 'enable-ma' %}
-net-snmp
-{% endif %}
-{% if limits %}
-connlimit
-{% endif %}
-
-[core]
-thread-count={{thread_cnt}}
-
-[log]
-syslog=accel-pppoe,daemon
-copy=1
-level=5
-
-{% if snmp == 'enable-ma' %}
-[snmp]
-master=1
-{% endif -%}
-
-[client-ip-range]
-disable
-
-{% if ppp_gw %}
-[ip-pool]
-gw-ip-address={{ppp_gw}}
-{% if client_ip_pool %}
-{{client_ip_pool}}
-{% endif -%}
-
-{% if client_ip_subnets %}
-{% for sn in client_ip_subnets %}
-{{sn}}
-{% endfor %}
-{% endif %}
-{% endif -%}
-
-{% if client_ipv6_pool %}
-[ipv6-pool]
-{% for prfx in client_ipv6_pool['prefix']: %}
-{{prfx}}
-{% endfor %}
-{% for prfx in client_ipv6_pool['delegate-prefix']: %}
-delegate={{prfx}}
-{% endfor %}
-{% endif %}
-
-{% if dns %}
-[dns]
-{% if dns[0] %}
-dns1={{dns[0]}}
-{% endif -%}
-{% if dns[1] %}
-dns2={{dns[1]}}
-{% endif -%}
-{% endif %}
-
-{% if dnsv6 %}
-[ipv6-dns]
-{% for srv in dnsv6: %}
-{{srv}}
-{% endfor %}
-{% endif %}
-
-{% if wins %}
-[wins]
-{% if wins[0] %}
-wins1={{wins[0]}}
-{% endif %}
-{% if wins[1] %}
-wins2={{wins[1]}}
-{% endif -%}
-{% endif -%}
-
-{% if authentication['mode'] == 'local' %}
-[chap-secrets]
-chap-secrets=/etc/accel-ppp/pppoe/chap-secrets
-{% endif -%}
-
-{% if authentication['mode'] == 'radius' %}
-[radius]
-{% for rsrv in authentication['radiussrv']: %}
-server={{rsrv}},{{authentication['radiussrv'][rsrv]['secret']}},\
-req-limit={{authentication['radiussrv'][rsrv]['req-limit']}},\
-fail-time={{authentication['radiussrv'][rsrv]['fail-time']}}
-{% endfor %}
-{% if authentication['radiusopt']['timeout'] %}
-timeout={{authentication['radiusopt']['timeout']}}
-{% endif %}
-{% if authentication['radiusopt']['acct-timeout'] %}
-acct-timeout={{authentication['radiusopt']['acct-timeout']}}
-{% endif %}
-{% if authentication['radiusopt']['max-try'] %}
-max-try={{authentication['radiusopt']['max-try']}}
-{% endif %}
-{% if authentication['radiusopt']['nas-id'] %}
-nas-identifier={{authentication['radiusopt']['nas-id']}}
-{% endif %}
-{% if authentication['radiusopt']['nas-ip'] %}
-nas-ip-address={{authentication['radiusopt']['nas-ip']}}
-{% endif -%}
-{% if authentication['radiusopt']['dae-srv'] %}
-dae-server={{authentication['radiusopt']['dae-srv']['ip-addr']}}:\
-{{authentication['radiusopt']['dae-srv']['port']}},\
-{{authentication['radiusopt']['dae-srv']['secret']}}
-{% endif -%}
-gw-ip-address={{ppp_gw}}
-verbose=1
-
-{% if authentication['radiusopt']['shaper'] %}
-[shaper]
-verbose=1
-attr={{authentication['radiusopt']['shaper']['attr']}}
-{% if authentication['radiusopt']['shaper']['vendor'] %}
-vendor={{authentication['radiusopt']['shaper']['vendor']}}
-{% endif -%}
-{% endif -%}
-{% endif %}
-
-[ppp]
-verbose=1
-check-ip=1
-{% if not sesscrtl == 'disable' %}
-single-session={{sesscrtl}}
-{% endif -%}
-{% if ppp_options['ccp'] %}
-ccp=1
-{% endif %}
-{% if ppp_options['min-mtu'] %}
-min-mtu={{ppp_options['min-mtu']}}
-{% else %}
-min-mtu={{mtu}}
-{% endif %}
-{% if ppp_options['mru'] %}
-mru={{ppp_options['mru']}}
-{% endif %}
-{% if ppp_options['mppe'] %}
-mppe={{ppp_options['mppe']}}
-{% else %}
-mppe=prefer
-{% endif %}
-{% if ppp_options['lcp-echo-interval'] %}
-lcp-echo-interval={{ppp_options['lcp-echo-interval']}}
-{% else %}
-lcp-echo-interval=30
-{% endif %}
-{% if ppp_options['lcp-echo-timeout'] %}
-lcp-echo-timeout={{ppp_options['lcp-echo-timeout']}}
-{% endif %}
-{% if ppp_options['lcp-echo-failure'] %}
-lcp-echo-failure={{ppp_options['lcp-echo-failure']}}
-{% else %}
-lcp-echo-failure=3
-{% endif %}
-{% if ppp_options['ipv4'] %}
-ipv4={{ppp_options['ipv4']}}
-{% endif %}
-{% if client_ipv6_pool %}
-ipv6=allow
-{% endif %}
-
-{% if ppp_options['ipv6'] %}
-ipv6={{ppp_options['ipv6']}}
-{% if ppp_options['ipv6-intf-id'] %}
-ipv6-intf-id={{ppp_options['ipv6-intf-id']}}
-{% endif %}
-{% if ppp_options['ipv6-peer-intf-id'] %}
-ipv6-peer-intf-id={{ppp_options['ipv6-peer-intf-id']}}
-{% endif %}
-{% if ppp_options['ipv6-accept-peer-intf-id'] %}
-ipv6-accept-peer-intf-id={{ppp_options['ipv6-accept-peer-intf-id']}}
-{% endif %}
-{% endif %}
-mtu={{mtu}}
-
-[pppoe]
-verbose=1
-{% if concentrator %}
-ac-name={{concentrator}}
-{% endif %}
-{% if interface %}
-{% for int in interface %}
-interface={{int}}
-{% if interface[int]['vlans'] %}
-vlan-mon={{int}},{{interface[int]['vlans']|join(',')}}
-interface=re:{{int}}\.\d+
-{% endif %}
-{% endfor -%}
-{% endif -%}
-
-{% if svc_name %}
-service-name={{svc_name|join(',')}}
-{% endif -%}
-
-{% if pado_delay %}
-pado-delay={{pado_delay}}
-{% endif %}
-
-{% if limits %}
-[connlimit]
-limit={{limits['conn-limit']}}
-burst={{limits['burst']}}
-timeout={{limits['timeout']}}
-{% endif %}
-
-[cli]
-tcp=127.0.0.1:2001
diff --git a/data/templates/sstp/chap-secrets.tmpl b/data/templates/sstp/chap-secrets.tmpl
deleted file mode 100644
index dd00d7bd0..000000000
--- a/data/templates/sstp/chap-secrets.tmpl
+++ /dev/null
@@ -1,10 +0,0 @@
-# username  server  password  acceptable local IP addresses   shaper
-{% for user in local_users %}
-{% if user.state == 'enabled' %}
-{% if user.upload and user.download %}
-{{ "%-12s" | format(user.name) }} * {{ "%-16s" | format(user.password) }} {{ "%-16s" | format(user.ip) }} {{ user.download }} / {{ user.upload }}
-{% else %}
-{{ "%-12s" | format(user.name) }} * {{ "%-16s" | format(user.password) }} {{ "%-16s" | format(user.ip) }}
-{% endif %}
-{% endif %}
-{% endfor %}
diff --git a/interface-definitions/include/accel-client-ipv6-pool.xml.in b/interface-definitions/include/accel-client-ipv6-pool.xml.in
new file mode 100644
index 000000000..455ada6ef
--- /dev/null
+++ b/interface-definitions/include/accel-client-ipv6-pool.xml.in
@@ -0,0 +1,59 @@
+<node name="client-ipv6-pool">
+  <properties>
+    <help>Pool of client IPv6 addresses</help>
+  </properties>
+  <children>
+    <tagNode name="prefix">
+      <properties>
+        <help>Pool of addresses used to assign to clients</help>
+        <valueHelp>
+          <format>ipv6net</format>
+          <description>IPv6 address and prefix length</description>
+        </valueHelp>
+        <constraint>
+          <validator name="ipv6-prefix"/>
+        </constraint>
+      </properties>
+      <children>
+          <leafNode name="mask">
+            <properties>
+              <help>Prefix length used for individual client</help>
+              <valueHelp>
+                <format>&lt;48-128&gt;</format>
+                <description>Client prefix length (default: 64)</description>
+              </valueHelp>
+              <constraint>
+                <validator name="numeric" argument="--range 48-128"/>
+              </constraint>
+            </properties>
+          </leafNode>
+      </children>
+    </tagNode>
+    <tagNode name="delegate">
+      <properties>
+        <help>Subnet used to delegate prefix through DHCPv6-PD (RFC3633)</help>
+        <valueHelp>
+          <format>ipv6net</format>
+          <description>IPv6 address and prefix length</description>
+        </valueHelp>
+        <constraint>
+          <validator name="ipv6-prefix"/>
+        </constraint>
+      </properties>
+      <children>
+          <leafNode name="delegation-prefix">
+            <properties>
+              <help>Prefix length delegated to client</help>
+              <valueHelp>
+                <format>&lt;32-64&gt;</format>
+                <description>Delegated prefix length</description>
+              </valueHelp>
+              <constraint>
+                <validator name="numeric" argument="--range 32-64"/>
+              </constraint>
+            </properties>
+          </leafNode>
+      </children>
+    </tagNode>
+  </children>
+</node>
diff --git a/interface-definitions/service-pppoe.xml.in b/interface-definitions/service_pppoe-server.xml.in
index b4950ede1..e42de4f90 100644
--- a/interface-definitions/service-pppoe.xml.in
+++ b/interface-definitions/service_pppoe-server.xml.in
@@ -2,7 +2,7 @@
 <interfaceDefinition>
   <node name="service">
     <children>
-      <node name="pppoe-server" owner="${vyos_conf_scripts_dir}/service-pppoe.py">
+      <node name="pppoe-server" owner="${vyos_conf_scripts_dir}/service_pppoe-server.py">
         <properties>
           <help>Point to Point over Ethernet (PPPoE) Server</help>
           <priority>900</priority>
@@ -126,37 +126,26 @@
                   </completionHelp>
                 </properties>
               </leafNode>
-              <tagNode name="radius-server">
-                <properties>
-                  <help>IP address of RADIUS server</help>
-                  <valueHelp>
-                    <format>ipv4</format>
-                      <description>IP address of RADIUS server</description>
-                  </valueHelp>
-                </properties>
-                <children>
-                  <leafNode name="secret">
-                    <properties>
-                      <help>Key for accessing the specified server</help>
-                    </properties>
-                  </leafNode>
-                  <leafNode name="req-limit">
-                    <properties>
-                      <help>Maximum number of simultaneous requests to server (default: unlimited)</help>
-                    </properties>
-                  </leafNode>
-                  <leafNode name="fail-time">
-                    <properties>
-                      <help>If server does not responds mark it as unavailable for this amount of time in seconds</help>
-                    </properties>
-                  </leafNode>
-                </children>
-              </tagNode>
-              <node name="radius-settings">
-                <properties>
-                  <help>RADIUS settings</help>
-                </properties>
+              #include <include/radius-server.xml.i>
+              <node name="radius">
                 <children>
+                  <tagNode name="server">
+                    <children>
+                      <leafNode name="fail-time">
+                        <properties>
+                          <help>Mark server unavailable for &lt;n&gt; seconds on failure</help>
+                          <valueHelp>
+                            <format>0-600</format>
+                            <description>Fail time penalty</description>
+                          </valueHelp>
+                          <constraint>
+                            <validator name="numeric" argument="--range 0-600"/>
+                          </constraint>
+                          <constraintErrorMessage>Fail time must be between 0 and 600 seconds</constraintErrorMessage>
+                        </properties>
+                      </leafNode>
+                    </children>
+                  </tagNode>
                   <leafNode name="timeout">
                     <properties>
                       <help>Timeout to wait response from server (seconds)</help>
@@ -177,11 +166,6 @@
                       <help>Value to send to RADIUS server in NAS-Identifier attribute and to be matched in DM/CoA requests.</help>
                     </properties>
                   </leafNode>
-                  <leafNode name="nas-ip-address">
-                    <properties>
-                      <help>Value to send to RADIUS server in NAS-IP-Address attribute and to be matched in DM/CoA requests. Also DM/CoA server will bind to that address.</help>
-                    </properties>
-                  </leafNode>
                   <node name="dae-server">
                     <properties>
                       <help>IPv4 address and port to bind Dynamic Authorization Extension server (DM/CoA)</help>
@@ -264,100 +248,25 @@
               </leafNode>
             </children>
           </node>
-          <node name="client-ipv6-pool">
+          #include <include/accel-client-ipv6-pool.xml.in>
+          <leafNode name="name-server">
             <properties>
-              <help>Pool of client IPv6 addresses</help>
-            </properties>
-            <children>
-              <leafNode name="prefix">
-                <properties>
-                  <help>Format: ipv6prefix/mask,prefix_len (e.g.: fc00:0:1::/48,64 - divides prefix into /64 subnets for clients)</help>
-                  <multi />
-                </properties>
-              </leafNode>
-              <leafNode name="delegate-prefix">
-                <properties>
-                  <help>Format: ipv6prefix/mask,prefix_len (delegate to clients through DHCPv6 prefix delegation - rfc3633)</help>
-                  <multi />
-                </properties>
-              </leafNode>
-            </children>
-          </node>
-          <node name="dns-servers">
-            <properties>
-              <help>IPv4 Domain Name Service (DNS) server</help>
-            </properties>
-            <children>
-            <leafNode name="server-1">
-              <properties>
-                <help>Primary DNS server</help>
-                <valueHelp>
-                  <format>ipv4</format>
-                  <description>IPv4 address</description>
-                </valueHelp>
-                <constraint>
-                  <validator name="ipv4-address"/>
-                </constraint>
-              </properties>
-            </leafNode>
-            <leafNode name="server-2">
-              <properties>
-                <help>Secondary DNS server</help>
-                <valueHelp>
-                  <format>ipv4</format>
-                  <description>IPv4 address</description>
-                </valueHelp>
-                <constraint>
-                  <validator name="ipv4-address"/>
-                </constraint>
-              </properties>
-            </leafNode>
-            </children>
-          </node>
-           <node name="dnsv6-servers">
-            <properties>
-              <help>IPv6 Domain Name Service (DNS) server</help>
+              <help>Domain Name Server (DNS) propagated to client</help>
+              <valueHelp>
+                <format>ipv4</format>
+                <description>Domain Name Server (DNS) IPv4 address</description>
+              </valueHelp>
+              <valueHelp>
+                <format>ipv6</format>
+                <description>Domain Name Server (DNS) IPv6 address</description>
+              </valueHelp>
+              <constraint>
+                <validator name="ipv4-address"/>
+                <validator name="ipv6-address"/>
+              </constraint>
+              <multi/>
             </properties>
-            <children>
-              <leafNode name="server-1">
-                <properties>
-                  <valueHelp>
-                    <format>ipv6</format>
-                    <description>IPv6 address</description>
-                  </valueHelp>
-                  <help>Primary DNS server</help>
-                  <constraint>
-                    <validator name="ipv6-address"/>
-                  </constraint>
-                </properties>
-              </leafNode>
-              <leafNode name="server-2">
-                <properties>
-                  <valueHelp>
-                    <format>ipv6</format>
-                    <description>IPv6 address</description>
-                  </valueHelp>
-                  <help>Secondary DNS server</help>
-                  <constraint>
-                    <validator name="ipv6-address"/>
-                  </constraint>
-                </properties>
-              </leafNode>
-              <leafNode name="server-3">
-                <properties>
-                  <valueHelp>
-                    <format>ipv6</format>
-                  <description>IPv6 address</description>
-                  </valueHelp>
-                  <help>Tertiary DNS server</help>
-                  <constraint>
-                    <validator name="ipv6-address"/>
-                  </constraint>
-                </properties>
-              </leafNode>
-            </children>
-          </node>
-
+          </leafNode>
           <tagNode name="interface">
             <properties>
               <help>interface(s) to listen on</help>
@@ -439,29 +348,19 @@
               <multi/>
             </properties>
           </leafNode>
-          <node name="wins-servers">
+          <leafNode name="wins-server">
             <properties>
-              <help>Windows Internet Name Service (WINS) server settings</help>
+              <help>Windows Internet Name Service (WINS) servers propagated to client</help>
+              <valueHelp>
+                <format>ipv4</format>
+                <description>Domain Name Server (DNS) IPv4 address</description>
+              </valueHelp>
+              <constraint>
+                <validator name="ipv4-address"/>
+              </constraint>
+              <multi/>
             </properties>
-            <children>
-              <leafNode name="server-1">
-                <properties>
-                  <help>Primary WINS server</help>
-                  <constraint>
-                    <validator name="ipv4-address"/>
-                  </constraint>
-                </properties>
-              </leafNode>
-              <leafNode name="server-2">
-                <properties>
-                  <help>Secondary WINS server</help>
-                  <constraint>
-                    <validator name="ipv4-address"/>
-                  </constraint>
-                </properties>
-              </leafNode>
-            </children>
-          </node>
+          </leafNode>
           <node name="ppp-options">
             <properties>
               <help>Advanced protocol options</help>
diff --git a/interface-definitions/vpn-l2tp.xml.in b/interface-definitions/vpn_l2tp.xml.in
index d4286a810..d92817ca0 100644
--- a/interface-definitions/vpn-l2tp.xml.in
+++ b/interface-definitions/vpn_l2tp.xml.in
@@ -232,65 +232,7 @@
                   </leafNode>
                 </children>
               </node>
-              <node name="client-ipv6-pool">
-                <properties>
-                  <help>Pool of client IPv6 addresses</help>
-                </properties>
-                <children>
-                  <tagNode name="prefix">
-                    <properties>
-                      <help>Pool of addresses used to assign to clients</help>
-                      <valueHelp>
-                        <format>ipv6net</format>
-                        <description>IPv6 address and prefix length</description>
-                      </valueHelp>
-                      <constraint>
-                        <validator name="ipv6-prefix"/>
-                      </constraint>
-                    </properties>
-                    <children>
-                        <leafNode name="mask">
-                          <properties>
-                            <help>Prefix length used for individual client</help>
-                            <valueHelp>
-                              <format>&lt;48-128&gt;</format>
-                              <description>Client prefix length (default: 64)</description>
-                            </valueHelp>
-                            <constraint>
-                              <validator name="numeric" argument="--range 48-128"/>
-                            </constraint>
-                          </properties>
-                        </leafNode>
-                    </children>
-                  </tagNode>
-                  <tagNode name="delegate">
-                    <properties>
-                      <help>Subnet used to delegate prefix through DHCPv6-PD (RFC3633)</help>
-                      <valueHelp>
-                        <format>ipv6net</format>
-                        <description>IPv6 address and prefix length</description>
-                      </valueHelp>
-                      <constraint>
-                        <validator name="ipv6-prefix"/>
-                      </constraint>
-                    </properties>
-                    <children>
-                        <leafNode name="delegation-prefix">
-                          <properties>
-                            <help>Prefix length delegated to client</help>
-                            <valueHelp>
-                              <format>&lt;32-64&gt;</format>
-                              <description>Delegated prefix length</description>
-                            </valueHelp>
-                            <constraint>
-                              <validator name="numeric" argument="--range 32-64"/>
-                            </constraint>
-                          </properties>
-                        </leafNode>
-                    </children>
-                  </tagNode>
-                </children>
-              </node>
+              #include <include/accel-client-ipv6-pool.xml.in>
               <leafNode name="description">
                 <properties>
                   <help>Description for L2TP remote-access settings</help>
diff --git a/interface-definitions/vpn-pptp.xml.in b/interface-definitions/vpn_pptp.xml.in
index 9636c3b39..5d8ead2aa 100644
--- a/interface-definitions/vpn-pptp.xml.in
+++ b/interface-definitions/vpn_pptp.xml.in
@@ -2,7 +2,7 @@
 <interfaceDefinition>
   <node name="vpn">
     <children>
-      <node name="pptp" owner="${vyos_conf_scripts_dir}/vpn-pptp.py">
+      <node name="pptp" owner="${vyos_conf_scripts_dir}/vpn_pptp.py">
         <properties>
           <help>Point to Point Tunneling Protocol (PPTP) Virtual Private Network (VPN)</help>
         </properties>
diff --git a/interface-definitions/vpn-sstp.xml.in b/interface-definitions/vpn_sstp.xml.in
index b026417b3..b026417b3 100644
--- a/interface-definitions/vpn-sstp.xml.in
+++ b/interface-definitions/vpn_sstp.xml.in
diff --git a/src/conf_mode/service-pppoe.py b/src/conf_mode/service-pppoe.py
deleted file mode 100755
index a96249199..000000000
--- a/src/conf_mode/service-pppoe.py
+++ /dev/null
@@ -1,428 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright (C) 2018-2020 VyOS maintainers and contributors
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 or later as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-import os
-import re
-
-from socket import socket, AF_INET, SOCK_STREAM
-from sys import exit
-from time import sleep
-
-from vyos.config import Config
-from vyos import ConfigError
-from vyos.util import run
-from vyos.template import render
-
-
-pidfile = r'/var/run/accel_pppoe.pid'
-pppoe_cnf_dir = r'/etc/accel-ppp/pppoe'
-chap_secrets = pppoe_cnf_dir + '/chap-secrets'
-pppoe_conf = pppoe_cnf_dir + '/pppoe.config'
-# accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p
-# /var/run/accel_pppoe.pid
-
-# config path creation
-if not os.path.exists(pppoe_cnf_dir):
-    os.makedirs(pppoe_cnf_dir)
-
-#
-# depending on hw and threads, daemon needs a little to start
-# if it takes longer than 100 * 0.5 secs, exception is being raised
-# not sure if that's the best way to check it, but it worked so far quite well
-#
-def _chk_con():
-    cnt = 0
-    s = socket(AF_INET, SOCK_STREAM)
-    while True:
-        try:
-            s.connect(("127.0.0.1", 2001))
-            break
-        except ConnectionRefusedError:
-            sleep(0.5)
-            cnt += 1
-            if cnt == 100:
-                raise("failed to start pppoe server")
-
-
-def _accel_cmd(command):
-    return run(f'/usr/bin/accel-cmd {command}')
-
-
-def get_config():
-    c = Config()
-    if not c.exists('service pppoe-server'):
-        return None
-
-    config_data = {
-        'concentrator': 'vyos-ac',
-        'authentication': {
-            'local-users': {
-            },
-            'mode': 'local',
-            'radiussrv': {},
-            'radiusopt': {}
-        },
-        'client_ip_pool': '',
-        'client_ip_subnets': [],
-        'client_ipv6_pool': {},
-        'interface': {},
-        'ppp_gw': '',
-        'svc_name': [],
-        'dns': [],
-        'dnsv6': [],
-        'wins': [],
-        'mtu': '1492',
-        'ppp_options': {},
-        'limits': {},
-        'snmp': 'disable',
-        'sesscrtl': 'replace',
-        'pado_delay': ''
-    }
-
-    c.set_level(['service', 'pppoe-server'])
-    # general options
-    if c.exists(['access-concentrator']):
-        config_data['concentrator'] = c.return_value(['access-concentrator'])
-    if c.exists(['service-name']):
-        config_data['svc_name'] = c.return_values(['service-name'])
-    if c.exists(['interface']):
-        for intfc in c.list_nodes(['interface']):
-            config_data['interface'][intfc] = {'vlans': []}
-            if c.exists(['interface', intfc, 'vlan-id']):
-                config_data['interface'][intfc]['vlans'] += c.return_values(
-                    ['interface', intfc, 'vlan-id'])
-            if c.exists(['interface', intfc, 'vlan-range']):
-                config_data['interface'][intfc]['vlans'] += c.return_values(
-                    ['interface', intfc, 'vlan-range'])
-    if c.exists(['local-ip']):
-        config_data['ppp_gw'] = c.return_value(['local-ip'])
-    if c.exists(['dns-servers']):
-        if c.return_value(['dns-servers', 'server-1']):
-            config_data['dns'].append(
-                c.return_value(['dns-servers', 'server-1']))
-        if c.return_value(['dns-servers', 'server-2']):
-            config_data['dns'].append(
-                c.return_value(['dns-servers', 'server-2']))
-    if c.exists(['dnsv6-servers']):
-        if c.return_value(['dnsv6-servers', 'server-1']):
-            config_data['dnsv6'].append(
-                c.return_value(['dnsv6-servers', 'server-1']))
-        if c.return_value(['dnsv6-servers', 'server-2']):
-            config_data['dnsv6'].append(
-                c.return_value(['dnsv6-servers', 'server-2']))
-        if c.return_value(['dnsv6-servers', 'server-3']):
-            config_data['dnsv6'].append(
-                c.return_value(['dnsv6-servers', 'server-3']))
-    if c.exists(['wins-servers']):
-        if c.return_value(['wins-servers', 'server-1']):
-            config_data['wins'].append(
-                c.return_value(['wins-servers', 'server-1']))
-        if c.return_value(['wins-servers', 'server-2']):
-            config_data['wins'].append(
-                c.return_value(['wins-servers', 'server-2']))
-    if c.exists(['client-ip-pool']):
-        if c.exists(['client-ip-pool', 'start']):
-            config_data['client_ip_pool'] = c.return_value(
-                ['client-ip-pool start'])
-            if c.exists(['client-ip-pool stop']):
-                config_data['client_ip_pool'] += '-' + re.search(
-                    '[0-9]+$', c.return_value(['client-ip-pool', 'stop'])).group(0)
-            else:
-                raise ConfigError('client ip pool stop required')
-        if c.exists(['client-ip-pool', 'subnet']):
-            config_data['client_ip_subnets'] = c.return_values(
-                ['client-ip-pool', 'subnet'])
-    if c.exists(['client-ipv6-pool', 'prefix']):
-        config_data['client_ipv6_pool'][
-            'prefix'] = c.return_values(['client-ipv6-pool', 'prefix'])
-        if c.exists(['client-ipv6-pool', 'delegate-prefix']):
-            config_data['client_ipv6_pool']['delegate-prefix'] = c.return_values(
-                ['client-ipv6-pool', 'delegate-prefix'])
-    if c.exists(['limits']):
-        if c.exists(['limits', 'burst']):
-            config_data['limits']['burst'] = str(
-                c.return_value(['limits', 'burst']))
-        if c.exists(['limits', 'timeout']):
-            config_data['limits']['timeout'] = str(
-                c.return_value(['limits', 'timeout']))
-        if c.exists(['limits', 'connection-limit']):
-            config_data['limits']['conn-limit'] = str(
-                c.return_value(['limits', 'connection-limit']))
-    if c.exists(['snmp']):
-        config_data['snmp'] = 'enable'
-    if c.exists(['snmp', 'master-agent']):
-        config_data['snmp'] = 'enable-ma'
-
-    # authentication mode local
-    if not c.exists(['authentication', 'mode']):
-        raise ConfigError('pppoe-server authentication mode required')
-
-    if c.exists(['authentication', 'mode', 'local']):
-        if c.exists(['authentication', 'local-users', 'username']):
-            for usr in c.list_nodes(['authentication', 'local-users', 'username']):
-                config_data['authentication']['local-users'].update(
-                    {
-                        usr: {
-                            'passwd': None,
-                            'state': 'enabled',
-                            'ip': '*',
-                            'upload': None,
-                            'download': None
-                        }
-                    }
-                )
-                if c.exists(['authentication', 'local-users', 'username', usr, 'password']):
-                    config_data['authentication']['local-users'][usr]['passwd'] = c.return_value(
-                        ['authentication', 'local-users', 'username', usr, 'password'])
-                if c.exists(['authentication', 'local-users', 'username', usr, 'disable']):
-                    config_data['authentication'][
-                        'local-users'][usr]['state'] = 'disable'
-                if c.exists(['authentication', 'local-users', 'username', usr, 'static-ip']):
-                    config_data['authentication']['local-users'][usr]['ip'] = c.return_value(
-                        ['authentication', 'local-users', 'username', usr, 'static-ip'])
-                if c.exists(['authentication', 'local-users', 'username', usr, 'rate-limit', 'download']):
-                    config_data['authentication']['local-users'][usr]['download'] = c.return_value(
-                        ['authentication', 'local-users', 'username', usr, 'rate-limit', 'download'])
-                if c.exists(['authentication', 'local-users', 'username', usr, 'rate-limit', 'upload']):
-                    config_data['authentication']['local-users'][usr]['upload'] = c.return_value(
-                        ['authentication', 'local-users', 'username', usr, 'rate-limit', 'upload'])
-
-        # authentication mode radius servers and settings
-
-    if c.exists(['authentication', 'mode', 'radius']):
-        config_data['authentication']['mode'] = 'radius'
-        rsrvs = c.list_nodes(['authentication', 'radius-server'])
-        for rsrv in rsrvs:
-            if c.return_value(['authentication', 'radius-server', rsrv, 'fail-time']) == None:
-                ftime = '0'
-            else:
-                ftime = str(
-                    c.return_value(['authentication', 'radius-server', rsrv, 'fail-time']))
-            if c.return_value(['authentication', 'radius-server', rsrv, 'req-limit']) == None:
-                reql = '0'
-            else:
-                reql = str(
-                    c.return_value(['authentication', 'radius-server', rsrv, 'req-limit']))
-            config_data['authentication']['radiussrv'].update(
-                {
-                    rsrv: {
-                        'secret': c.return_value(['authentication', 'radius-server', rsrv, 'secret']),
-                        'fail-time': ftime,
-                        'req-limit': reql
-                    }
-                }
-            )
-
-        # advanced radius-setting
-        if c.exists(['authentication', 'radius-settings']):
-            if c.exists(['authentication', 'radius-settings', 'acct-timeout']):
-                config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value(
-                    ['authentication', 'radius-settings', 'acct-timeout'])
-            if c.exists(['authentication', 'radius-settings', 'max-try']):
-                config_data['authentication']['radiusopt'][
-                    'max-try'] = c.return_value(['authentication', 'radius-settings', 'max-try'])
-            if c.exists(['authentication', 'radius-settings', 'timeout']):
-                config_data['authentication']['radiusopt'][
-                    'timeout'] = c.return_value(['authentication', 'radius-settings', 'timeout'])
-            if c.exists(['authentication', 'radius-settings', 'nas-identifier']):
-                config_data['authentication']['radiusopt']['nas-id'] = c.return_value(
-                    ['authentication', 'radius-settings', 'nas-identifier'])
-            if c.exists(['authentication', 'radius-settings', 'nas-ip-address']):
-                config_data['authentication']['radiusopt']['nas-ip'] = c.return_value(
-                    ['authentication', 'radius-settings', 'nas-ip-address'])
-            if c.exists(['authentication', 'radius-settings', 'dae-server']):
-                config_data['authentication']['radiusopt'].update(
-                    {
-                        'dae-srv': {
-                            'ip-addr': c.return_value(['authentication', 'radius-settings', 'dae-server', 'ip-address']),
-                            'port': c.return_value(['authentication', 'radius-settings', 'dae-server', 'port']),
-                            'secret': str(c.return_value(['authentication', 'radius-settings', 'dae-server', 'secret']))
-                        }
-                    }
-                )
-            # filter-id is the internal accel default if attribute is empty
-            # set here as default for visibility which may change in the future
-            if c.exists(['authentication', 'radius-settings', 'rate-limit', 'enable']):
-                if not c.exists(['authentication', 'radius-settings', 'rate-limit', 'attribute']):
-                    config_data['authentication']['radiusopt']['shaper'] = {
-                        'attr': 'Filter-Id'
-                    }
-                else:
-                    config_data['authentication']['radiusopt']['shaper'] = {
-                        'attr': c.return_value(['authentication', 'radius-settings', 'rate-limit', 'attribute'])
-                    }
-                if c.exists(['authentication', 'radius-settings', 'rate-limit', 'vendor']):
-                    config_data['authentication']['radiusopt']['shaper'][
-                        'vendor'] = c.return_value(['authentication', 'radius-settings', 'rate-limit', 'vendor'])
-
-    if c.exists(['mtu']):
-        config_data['mtu'] = c.return_value(['mtu'])
-
-    # ppp_options
-    ppp_options = {}
-    if c.exists(['ppp-options']):
-        if c.exists(['ppp-options', 'ccp']):
-            ppp_options['ccp'] = c.return_value(['ppp-options', 'ccp'])
-        if c.exists(['ppp-options', 'min-mtu']):
-            ppp_options['min-mtu'] = c.return_value(['ppp-options', 'min-mtu'])
-        if c.exists(['ppp-options', 'mru']):
-            ppp_options['mru'] = c.return_value(['ppp-options', 'mru'])
-        if c.exists(['ppp-options', 'mppe deny']):
-            ppp_options['mppe'] = 'deny'
-        if c.exists(['ppp-options', 'mppe', 'require']):
-            ppp_options['mppe'] = 'require'
-        if c.exists(['ppp-options', 'mppe', 'prefer']):
-            ppp_options['mppe'] = 'prefer'
-        if c.exists(['ppp-options', 'lcp-echo-failure']):
-            ppp_options['lcp-echo-failure'] = c.return_value(
-                ['ppp-options', 'lcp-echo-failure'])
-        if c.exists(['ppp-options', 'lcp-echo-interval']):
-            ppp_options['lcp-echo-interval'] = c.return_value(
-                ['ppp-options', 'lcp-echo-interval'])
-        if c.exists(['ppp-options', 'ipv4']):
-            ppp_options['ipv4'] = c.return_value(['ppp-options', 'ipv4'])
-        if c.exists(['ppp-options', 'ipv6']):
-            ppp_options['ipv6'] = c.return_value(['ppp-options', 'ipv6'])
-        if c.exists(['ppp-options', 'ipv6-accept-peer-intf-id']):
-            ppp_options['ipv6-accept-peer-intf-id'] = 1
-        if c.exists(['ppp-options', 'ipv6-intf-id']):
-            ppp_options['ipv6-intf-id'] = c.return_value(
-                ['ppp-options', 'ipv6-intf-id'])
-        if c.exists(['ppp-options', 'ipv6-peer-intf-id']):
-            ppp_options['ipv6-peer-intf-id'] = c.return_value(
-                ['ppp-options', 'ipv6-peer-intf-id'])
-        if c.exists(['ppp-options', 'lcp-echo-timeout']):
-            ppp_options['lcp-echo-timeout'] = c.return_value(
-                ['ppp-options', 'lcp-echo-timeout'])
-
-    if len(ppp_options) != 0:
-        config_data['ppp_options'] = ppp_options
-
-    if c.exists(['session-control']):
-        config_data['sesscrtl'] = c.return_value(['session-control'])
-
-    if c.exists(['pado-delay']):
-        config_data['pado_delay'] = '0'
-        a = {}
-        for id in c.list_nodes(['pado-delay']):
-            if not c.return_value(['pado-delay', id, 'sessions']):
-                a[id] = 0
-            else:
-                a[id] = c.return_value(['pado-delay', id, 'sessions'])
-
-        for k in sorted(a.keys()):
-            if k != sorted(a.keys())[-1]:
-                config_data['pado_delay'] += ",{0}:{1}".format(k, a[k])
-            else:
-                config_data['pado_delay'] += ",{0}:{1}".format('-1', a[k])
-
-    return config_data
-
-
-def verify(c):
-    if c == None:
-        return None
-    # vertify auth settings
-    if c['authentication']['mode'] == 'local':
-        if not c['authentication']['local-users']:
-            raise ConfigError(
-                'pppoe-server authentication local-users required')
-
-        for usr in c['authentication']['local-users']:
-            if not c['authentication']['local-users'][usr]['passwd']:
-                raise ConfigError('user ' + usr + ' requires a password')
-            # if up/download is set, check that both have a value
-            if c['authentication']['local-users'][usr]['upload']:
-                if not c['authentication']['local-users'][usr]['download']:
-                    raise ConfigError(
-                        'user ' + usr + ' requires download speed value')
-            if c['authentication']['local-users'][usr]['download']:
-                if not c['authentication']['local-users'][usr]['upload']:
-                    raise ConfigError(
-                        'user ' + usr + ' requires upload speed value')
-
-    if c['authentication']['mode'] == 'radius':
-        if len(c['authentication']['radiussrv']) == 0:
-            raise ConfigError('radius server required')
-        for rsrv in c['authentication']['radiussrv']:
-            if c['authentication']['radiussrv'][rsrv]['secret'] == None:
-                raise ConfigError(
-                    'radius server ' + rsrv + ' needs a secret configured')
-
-    # local ippool and gateway settings config checks
-
-    if c['client_ip_subnets'] or c['client_ip_pool']:
-        if not c['ppp_gw']:
-            raise ConfigError('pppoe-server local-ip required')
-
-    if c['ppp_gw'] and not c['client_ip_subnets'] and not c['client_ip_pool']:
-        print ("Warning: No pppoe client IPv4 pool defined")
-
-
-def generate(c):
-    if c == None:
-        return None
-
-    # accel-cmd reload doesn't work so any change results in a restart of the
-    # daemon
-    try:
-        if os.cpu_count() == 1:
-            c['thread_cnt'] = 1
-        else:
-            c['thread_cnt'] = int(os.cpu_count() / 2)
-    except KeyError:
-        if os.cpu_count() == 1:
-            c['thread_cnt'] = 1
-        else:
-            c['thread_cnt'] = int(os.cpu_count() / 2)
-
-    render(pppoe_conf, 'pppoe-server/pppoe.config.tmpl', c, trim_blocks=True)
-
-    if c['authentication']['local-users']:
-        old_umask = os.umask(0o077)
-        render(chap_secrets, 'pppoe-server/chap-secrets.tmpl', c, trim_blocks=True)
-        os.umask(old_umask)
-
-    return c
-
-
-def apply(c):
-    if c == None:
-        if os.path.exists(pidfile):
-            _accel_cmd('shutdown hard')
-            if os.path.exists(pidfile):
-                os.remove(pidfile)
-        return None
-
-    if not os.path.exists(pidfile):
-        ret = run(f'/usr/sbin/accel-pppd -c {pppoe_conf} -p {pidfile} -d')
-        _chk_con()
-        if ret != 0 and os.path.exists(pidfile):
-            os.remove(pidfile)
-            raise ConfigError('accel-pppd failed to start')
-    else:
-        _accel_cmd('restart')
-
-
-if __name__ == '__main__':
-    try:
-        c = get_config()
-        verify(c)
-        generate(c)
-        apply(c)
-    except ConfigError as e:
-        print(e)
-        exit(1)
diff --git a/src/conf_mode/service_pppoe-server.py b/src/conf_mode/service_pppoe-server.py
new file mode 100755
index 000000000..13d0b1920
--- /dev/null
+++ b/src/conf_mode/service_pppoe-server.py
@@ -0,0 +1,456 @@
+#!/usr/bin/env python3
+#
+# Copyright (C) 2018-2020 VyOS maintainers and contributors
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+import os
+import re
+
+from copy import deepcopy
+from stat import S_IRUSR, S_IWUSR, S_IRGRP
+from sys import exit
+
+from vyos.config import Config
+from vyos.template import render
+from vyos.util import call
+from vyos.validate import is_ipv4
+from vyos import ConfigError
+
+pppoe_conf = r'/run/accel-pppd/pppoe.conf'
+pppoe_chap_secrets = r'/run/accel-pppd/pppoe.chap-secrets'
+
+default_config_data = {
+    'auth_mode': 'local',
+    'chap_secrets_file': pppoe_chap_secrets, # used in Jinja2 template
+    'client_ip_pool': '',
+    'client_ip_subnets': [],
+    'client_ipv6_pool': [],
+    'client_ipv6_delegate_prefix': [],
+    'concentrator': 'vyos-ac',
+    'interfaces': [],
+    'local_users' : [],
+
+    'svc_name': [],
+    'dnsv4': [],
+    'dnsv6': [],
+    'wins': [],
+    'mtu': '1492',
+
+    'limits_burst': '',
+    'limits_connections': '',
+    'limits_timeout': '',
+
+    'pado_delay': '',
+    'ppp_ccp': False,
+    'ppp_gw': '',
+    'ppp_ipv4': '',
+    'ppp_ipv6': '',
+    'ppp_ipv6_accept_peer_intf_id': False,
+    'ppp_ipv6_intf_id': '',
+    'ppp_ipv6_peer_intf_id': '',
+    'ppp_echo_failure': '3',
+    'ppp_echo_interval': '30',
+    'ppp_echo_timeout': '0',
+    'ppp_min_mtu': '',
+    'ppp_mppe': 'prefer',
+    'ppp_mru': '',
+
+    'radius_server': [],
+    'radius_acct_tmo': '3',
+    'radius_max_try': '3',
+    'radius_timeout': '3',
+    'radius_nas_id': '',
+    'radius_nas_ip': '',
+    'radius_source_address': '',
+    'radius_shaper_attr': '',
+    'radius_shaper_vendor': '',
+    'radius_dynamic_author': '',
+    'sesscrtl': 'replace',
+    'snmp': False,
+}
+
+def get_config():
+    conf = Config()
+    base_path = ['service', 'pppoe-server']
+    if not conf.exists(base_path):
+        return None
+
+    conf.set_level(base_path)
+    pppoe = deepcopy(default_config_data)
+
+    cpu = os.cpu_count()
+    if cpu > 1:
+        pppoe['thread_cnt'] = int(cpu/2)
+
+    # general options
+    if conf.exists(['access-concentrator']):
+        pppoe['concentrator'] = conf.return_value(['access-concentrator'])
+
+    if conf.exists(['service-name']):
+        pppoe['svc_name'] = conf.return_values(['service-name'])
+
+    if conf.exists(['interface']):
+        for interface in conf.list_nodes(['interface']):
+            conf.set_level(base_path + ['interface', interface])
+            tmp = {
+                'name': interface,
+                'vlans': []
+            }
+
+            if conf.exists(['vlan-id']):
+                tmp['vlans'] += conf.return_values(['vlan-id'])
+
+            if conf.exists(['vlan-range']):
+                tmp['vlans'] += conf.return_values(['vlan-range'])
+
+            pppoe['interfaces'].append(tmp)
+
+    conf.set_level(base_path)
+
+    if conf.exists(['local-ip']):
+        pppoe['ppp_gw'] = conf.return_value(['local-ip'])
+
+    if conf.exists(['name-server']):
+        for name_server in conf.return_values(['name-server']):
+            if is_ipv4(name_server):
+                pppoe['dnsv4'].append(name_server)
+            else:
+                pppoe['dnsv6'].append(name_server)
+
+    if conf.exists(['wins-server']):
+        pppoe['wins'] = conf.return_values(['wins-server'])
+
+
+    if conf.exists(['client-ip-pool']):
+        if conf.exists(['client-ip-pool', 'start']) and conf.exists(['client-ip-pool', 'stop']):
+            start = conf.return_value(['client-ip-pool', 'start'])
+            stop  = conf.return_value(['client-ip-pool', 'stop'])
+            pppoe['client_ip_pool'] = start + '-' + re.search('[0-9]+$', stop).group(0)
+
+        if conf.exists(['client-ip-pool', 'subnet']):
+            pppoe['client_ip_subnets'] = conf.return_values(['client-ip-pool', 'subnet'])
+
+
+    if conf.exists(['client-ipv6-pool', 'prefix']):
+        for prefix in conf.list_nodes(['client-ipv6-pool', 'prefix']):
+            tmp = {
+                'prefix': prefix,
+                'mask': '64'
+            }
+
+            if conf.exists(['client-ipv6-pool', 'prefix', prefix, 'mask']):
+                tmp['mask'] = conf.return_value(['client-ipv6-pool', 'prefix', prefix, 'mask'])
+
+            pppoe['client_ipv6_pool'].append(tmp)
+
+
+    if conf.exists(['client-ipv6-pool', 'delegate']):
+        for prefix in conf.list_nodes(['client-ipv6-pool', 'delegate']):
+            tmp = {
+                'prefix': prefix,
+                'mask': ''
+            }
+
+            if conf.exists(['client-ipv6-pool', 'delegate', prefix, 'delegation-prefix']):
+                tmp['mask'] = conf.return_value(['client-ipv6-pool', 'delegate', prefix, 'delegation-prefix'])
+
+            pppoe['client_ipv6_delegate_prefix'].append(tmp)
+
+
+    if conf.exists(['limits']):
+        if conf.exists(['limits', 'burst']):
+            pppoe['limits_burst'] = conf.return_value(['limits', 'burst'])
+
+        if conf.exists(['limits', 'connection-limit']):
+            pppoe['limits_connections'] = conf.return_value(['limits', 'connection-limit'])
+
+        if conf.exists(['limits', 'timeout']):
+            pppoe['limits_timeout'] = conf.return_value(['limits', 'timeout'])
+
+
+    if conf.exists(['snmp']):
+        pppoe['snmp'] = True
+
+    if conf.exists(['snmp', 'master-agent']):
+        pppoe['snmp'] = 'enable-ma'
+
+    # authentication mode local
+    if conf.exists(['authentication', 'mode']):
+        pppoe['auth_mode'] = conf.return_value(['authentication', 'mode'])
+
+    if conf.exists(['authentication', 'local-users']):
+        for username in conf.list_nodes(['authentication', 'local-users', 'username']):
+            user = {
+                'name' : username,
+                'password' : '',
+                'state' : 'enabled',
+                'ip' : '*',
+                'upload' : None,
+                'download' : None
+            }
+            conf.set_level(base_path + ['authentication', 'local-users', 'username', username])
+
+            if conf.exists(['password']):
+                user['password'] = conf.return_value(['password'])
+
+            if conf.exists(['disable']):
+                user['state'] = 'disable'
+
+            if conf.exists(['static-ip']):
+                user['ip'] = conf.return_value(['static-ip'])
+
+            if conf.exists(['rate-limit', 'download']):
+                user['download'] = conf.return_value(['rate-limit', 'download'])
+
+            if conf.exists(['rate-limit', 'upload']):
+                user['upload'] = conf.return_value(['rate-limit', 'upload'])
+
+            pppoe['local_users'].append(user)
+
+    conf.set_level(base_path)
+    #
+    # authentication mode radius servers and settings
+    if conf.exists(['authentication', 'mode', 'radius']):
+
+        for server in conf.list_nodes(['authentication', 'radius', 'server']):
+            radius = {
+                'server' : server,
+                'key' : '',
+                'fail_time' : 0,
+                'port' : '1812'
+            }
+
+            conf.set_level(base_path + ['authentication', 'radius', 'server', server])
+
+            if conf.exists(['fail-time']):
+                radius['fail-time'] = conf.return_value(['fail-time'])
+
+            if conf.exists(['port']):
+                radius['port'] = conf.return_value(['port'])
+
+            if conf.exists(['key']):
+                radius['key'] = conf.return_value(['key'])
+
+            if not conf.exists(['disable']):
+                pppoe['radius_server'].append(radius)
+
+        #
+        # advanced radius-setting
+        conf.set_level(base_path + ['authentication', 'radius'])
+
+        if conf.exists(['acct-timeout']):
+            pppoe['radius_acct_tmo'] = conf.return_value(['acct-timeout'])
+
+        if conf.exists(['max-try']):
+            pppoe['radius_max_try'] = conf.return_value(['max-try'])
+
+        if conf.exists(['timeout']):
+            pppoe['radius_timeout'] = conf.return_value(['timeout'])
+
+        if conf.exists(['nas-identifier']):
+            pppoe['radius_nas_id'] = conf.return_value(['nas-identifier'])
+
+        if conf.exists(['nas-ip-address']):
+            pppoe['radius_nas_ip'] = conf.return_value(['nas-ip-address'])
+
+        if conf.exists(['source-address']):
+            pppoe['radius_source_address'] = conf.return_value(['source-address'])
+
+        # Dynamic Authorization Extensions (DOA)/Change Of Authentication (COA)
+        if conf.exists(['dynamic-author']):
+            dae = {
+                'port' : '',
+                'server' : '',
+                'key' : ''
+            }
+
+            if conf.exists(['dynamic-author', 'ip-address']):
+                dae['server'] = conf.return_value(['dynamic-author', 'ip-address'])
+
+            if conf.exists(['dynamic-author', 'port']):
+                dae['port'] = conf.return_value(['dynamic-author', 'port'])
+
+            if conf.exists(['dynamic-author', 'secret']):
+                dae['key'] = conf.return_value(['dynamic-author', 'secret'])
+
+            pppoe['radius_dynamic_author'] = dae
+
+        # RADIUS based rate-limiter
+        if conf.exists(['rate-limit', 'enable']):
+            pppoe['radius_shaper_attr'] = 'Filter-Id'
+            c_attr = ['rate-limit', 'enable', 'attribute']
+            if conf.exists(c_attr):
+                pppoe['radius_shaper_attr'] = conf.return_value(c_attr)
+
+            c_vendor = ['rate-limit', 'enable', 'vendor']
+            if conf.exists(c_vendor):
+                pppoe['radius_shaper_vendor'] = conf.return_value(c_vendor)
+
+    # re-set config level
+    conf.set_level(base_path)
+
+    if conf.exists(['mtu']):
+        pppoe['mtu'] = conf.return_value(['mtu'])
+
+    if conf.exists(['session-control']):
+        pppoe['session_control'] = conf.return_value(['session-control'])
+
+    # ppp_options
+    if conf.exists(['ppp-options']):
+        conf.set_level(base_path + ['ppp-options'])
+
+        if conf.exists(['ccp']):
+            pppoe['ppp_ccp'] = True
+
+        if conf.exists(['ipv4']):
+            pppoe['ppp_ipv4'] = conf.return_value(['ipv4'])
+
+        if conf.exists(['ipv6']):
+            pppoe['ppp_ipv6'] = conf.return_value(['ipv6'])
+
+        if conf.exists(['ipv6-accept-peer-intf-id']):
+            pppoe['ppp_ipv6_peer_intf_id'] = True
+
+        if conf.exists(['ipv6-intf-id']):
+            pppoe['ppp_ipv6_intf_id'] = conf.return_value(['ipv6-intf-id'])
+
+        if conf.exists(['ipv6-peer-intf-id']):
+            pppoe['ppp_ipv6_peer_intf_id'] = conf.return_value(['ipv6-peer-intf-id'])
+
+        if conf.exists(['lcp-echo-failure']):
+            pppoe['ppp_echo_failure'] = conf.return_value(['lcp-echo-failure'])
+
+        if conf.exists(['lcp-echo-failure']):
+            pppoe['ppp_echo_interval'] = conf.return_value(['lcp-echo-failure'])
+
+        if conf.exists(['lcp-echo-timeout']):
+            pppoe['ppp_echo_timeout'] = conf.return_value(['lcp-echo-timeout'])
+
+        if conf.exists(['min-mtu']):
+            pppoe['ppp_min_mtu'] = conf.return_value(['min-mtu'])
+
+        if conf.exists(['mppe']):
+            pppoe['ppp_mppe'] = conf.return_value(['mppe'])
+
+        if conf.exists(['mru']):
+            pppoe['ppp_mru'] = conf.return_value(['mru'])
+
+    if conf.exists(['pado-delay']):
+        pppoe['pado_delay'] = '0'
+        a = {}
+        for id in conf.list_nodes(['pado-delay']):
+            if not conf.return_value(['pado-delay', id, 'sessions']):
+                a[id] = 0
+            else:
+                a[id] = conf.return_value(['pado-delay', id, 'sessions'])
+
+        for k in sorted(a.keys()):
+            if k != sorted(a.keys())[-1]:
+                pppoe['pado_delay'] += ",{0}:{1}".format(k, a[k])
+            else:
+                pppoe['pado_delay'] += ",{0}:{1}".format('-1', a[k])
+
+    return pppoe
+
+
+def verify(pppoe):
+    if not pppoe:
+        return None
+
+    # vertify auth settings
+    if pppoe['auth_mode'] == 'local':
+        if not pppoe['local_users']:
+            raise ConfigError('PPPoE local auth mode requires local users to be configured!')
+
+        for user in pppoe['local_users']:
+            username = user['name']
+            if not user['password']:
+                raise ConfigError(f'Password required for local user "{username}"')
+
+            # if up/download is set, check that both have a value
+            if user['upload'] and not user['download']:
+                raise ConfigError(f'Download speed value required for local user "{username}"')
+
+            if user['download'] and not user['upload']:
+                raise ConfigError(f'Upload speed value required for local user "{username}"')
+
+    elif pppoe['auth_mode'] == 'radius':
+        if len(pppoe['radius_server']) == 0:
+            raise ConfigError('RADIUS authentication requires at least one server')
+
+        for radius in pppoe['radius_server']:
+            if not radius['key']:
+                server = radius['server']
+                raise ConfigError(f'Missing RADIUS secret key for server "{{ server }}"')
+
+    if len(pppoe['wins']) > 2:
+        raise ConfigError('Not more then two IPv4 WINS name-servers can be configured')
+
+    if len(pppoe['dnsv4']) > 2:
+        raise ConfigError('Not more then two IPv4 DNS name-servers can be configured')
+
+    if len(pppoe['dnsv6']) > 3:
+        raise ConfigError('Not more then three IPv6 DNS name-servers can be configured')
+
+    # local ippool and gateway settings config checks
+    if pppoe['client_ip_subnets'] or pppoe['client_ip_pool']:
+        if not pppoe['ppp_gw']:
+            raise ConfigError('PPPoE server requires local IP to be configured')
+
+    if pppoe['ppp_gw'] and not pppoe['client_ip_subnets'] and not pppoe['client_ip_pool']:
+        print("Warning: No PPPoE client pool defined")
+
+    return None
+
+
+def generate(pppoe):
+    if not pppoe:
+        return None
+
+    dirname = os.path.dirname(pppoe_conf)
+    if not os.path.exists(dirname):
+        os.mkdir(dirname)
+
+    render(pppoe_conf, 'accel-ppp/pppoe.config.tmpl', c, trim_blocks=True)
+
+    if pppoe['local_users']:
+        render(pppoe_chap_secrets, 'accel-ppp/chap-secrets.tmpl', c, trim_blocks=True)
+        os.chmod(pppoe_chap_secrets, S_IRUSR | S_IWUSR | S_IRGRP)
+    else:
+        if os.path.exists(pppoe_chap_secrets):
+             os.unlink(pppoe_chap_secrets)
+
+    return None
+
+
+def apply(pppoe):
+    if not pppoe:
+        call('systemctl stop accel-ppp@pppoe.service')
+        for file in [pppoe_conf, pppoe_chap_secrets]:
+            if os.path.exists(file):
+                os.unlink(file)
+
+        return None
+
+    call('systemctl restart accel-ppp@pppoe.service')
+
+if __name__ == '__main__':
+    try:
+        c = get_config()
+        verify(c)
+        generate(c)
+        apply(c)
+    except ConfigError as e:
+        print(e)
+        exit(1)
diff --git a/src/conf_mode/vpn_l2tp.py b/src/conf_mode/vpn_l2tp.py
index a8b183bef..417520e09 100755
--- a/src/conf_mode/vpn_l2tp.py
+++ b/src/conf_mode/vpn_l2tp.py
@@ -252,7 +252,7 @@ def get_config():
                 'mask': ''
             }
 
-            if conf.exists(['client-ipv6-pool', 'delegate', prefix, 'mask']):
+            if conf.exists(['client-ipv6-pool', 'delegate', prefix, 'delegation-prefix']):
                 tmp['mask'] = conf.return_value(['client-ipv6-pool', 'delegate', prefix, 'delegation-prefix'])
 
             l2tp['client_ipv6_delegate_prefix'].append(tmp)
@@ -348,10 +348,10 @@ def generate(l2tp):
     if not os.path.exists(dirname):
         os.mkdir(dirname)
 
-    render(l2tp_conf, 'l2tp/l2tp.config.tmpl', c, trim_blocks=True)
+    render(l2tp_conf, 'accel-ppp/l2tp.config.tmpl', c, trim_blocks=True)
 
     if l2tp['auth_mode'] == 'local':
-        render(l2tp_chap_secrets, 'l2tp/chap-secrets.tmpl', l2tp)
+        render(l2tp_chap_secrets, 'accel-ppp/chap-secrets.tmpl', l2tp)
         os.chmod(l2tp_chap_secrets, S_IRUSR | S_IWUSR | S_IRGRP)
 
     else:
@@ -364,12 +364,9 @@ def generate(l2tp):
 def apply(l2tp):
     if not l2tp:
         call('systemctl stop accel-ppp@l2tp.service')
-
-        if os.path.exists(l2tp_conf):
-             os.unlink(l2tp_conf)
-
-        if os.path.exists(l2tp_chap_secrets):
-             os.unlink(l2tp_chap_secrets)
+        for file in [l2tp_chap_secrets, l2tp_conf]:
+            if os.path.exists(file):
+                os.unlink(file)
 
         return None
 
diff --git a/src/conf_mode/vpn-pptp.py b/src/conf_mode/vpn_pptp.py
index 15b80f984..15b80f984 100755
--- a/src/conf_mode/vpn-pptp.py
+++ b/src/conf_mode/vpn_pptp.py
diff --git a/src/conf_mode/vpn_sstp.py b/src/conf_mode/vpn_sstp.py
index 438731972..9ec352290 100755
--- a/src/conf_mode/vpn_sstp.py
+++ b/src/conf_mode/vpn_sstp.py
@@ -259,21 +259,22 @@ def verify(sstp):
             raise ConfigError('SSTP local auth mode requires local users to be configured!')
 
         for user in sstp['local_users']:
+            username = user['name']
             if not user['password']:
-                raise ConfigError(f"Password required for user {user['name']}")
+                raise ConfigError(f'Password required for local user "{username}"')
 
             # if up/download is set, check that both have a value
             if user['upload'] and not user['download']:
-                raise ConfigError(f"Download speed value required for user {user['name']}")
+                raise ConfigError(f'Download speed value required for local user "{username}"')
 
             if user['download'] and not user['upload']:
-                raise ConfigError(f"Upload speed value required for user {user['name']}")
+                raise ConfigError(f'Upload speed value required for local user "{username}"')
 
         if not sstp['client_ip_pool']:
-            raise ConfigError("Client IP subnet required")
+            raise ConfigError('Client IP subnet required')
 
         if not sstp['client_gateway']:
-            raise ConfigError("Client gateway IP address required")
+            raise ConfigError('Client gateway IP address required')
 
     if len(sstp['dnsv4']) > 2:
         raise ConfigError('Not more then two IPv4 DNS name-servers can be configured')
@@ -282,21 +283,25 @@ def verify(sstp):
         raise ConfigError('One or more SSL certificates missing')
 
     if not os.path.exists(sstp['ssl_ca']):
-        raise ConfigError(f"CA cert file {sstp['ssl_ca']} does not exist")
+        file = sstp['ssl_ca']
+        raise ConfigError(f'SSL CA certificate file "{file}" does not exist')
 
     if not os.path.exists(sstp['ssl_cert']):
-        raise ConfigError(f"SSL cert file {sstp['ssl_cert']} does not exist")
+        file = sstp['ssl_cert']
+        raise ConfigError(f'SSL public key file "{file}" does not exist')
 
     if not os.path.exists(sstp['ssl_key']):
-        raise ConfigError(f"SSL key file {sstp['ssl_key']} does not exist")
+        file = sstp['ssl_key']
+        raise ConfigError(f'SSL private key file "{file}" does not exist')
 
     if sstp['auth_mode'] == 'radius':
         if len(sstp['radius_server']) == 0:
-            raise ConfigError("RADIUS authentication requires at least one server")
+            raise ConfigError('RADIUS authentication requires at least one server')
 
         for radius in sstp['radius_server']:
             if not radius['key']:
-                raise ConfigError(f"Missing RADIUS secret for server {{ radius['key'] }}")
+                server = radius['server']
+                raise ConfigError(f'Missing RADIUS secret key for server "{{ server }}"')
 
 def generate(sstp):
     if not sstp:
@@ -307,10 +312,10 @@ def generate(sstp):
         os.mkdir(dirname)
 
     # accel-cmd reload doesn't work so any change results in a restart of the daemon
-    render(sstp_conf, 'sstp/sstp.config.tmpl', sstp, trim_blocks=True)
+    render(sstp_conf, 'accel-ppp/sstp.config.tmpl', sstp, trim_blocks=True)
 
     if sstp['local_users']:
-        render(sstp_chap_secrets, 'sstp/chap-secrets.tmpl', sstp, trim_blocks=True)
+        render(sstp_chap_secrets, 'accel-ppp/chap-secrets.tmpl', sstp, trim_blocks=True)
         os.chmod(sstp_chap_secrets, S_IRUSR | S_IWUSR | S_IRGRP)
     else:
         if os.path.exists(sstp_chap_secrets):
@@ -321,12 +326,9 @@ def generate(sstp):
 def apply(sstp):
     if not sstp:
         call('systemctl stop accel-ppp@sstp.service')
-
-        if os.path.exists(sstp_conf):
-             os.unlink(sstp_conf)
-
-        if os.path.exists(sstp_chap_secrets):
-             os.unlink(sstp_chap_secrets)
+        for file in [sstp_chap_secrets, sstp_conf]:
+            if os.path.exists(file):
+                os.unlink(file)
 
         return None
 
diff --git a/src/migration-scripts/l2tp/2-to-3 b/src/migration-scripts/l2tp/2-to-3
index bd0839e03..3472ee3ed 100755
--- a/src/migration-scripts/l2tp/2-to-3
+++ b/src/migration-scripts/l2tp/2-to-3
@@ -95,13 +95,13 @@ else:
         # delete old delegate prefix CLI nodes
         config.delete(ipv6_base + ['delegate-prefix'])
         # create ned delegation tag node
-        config.set(ipv6_base + ['delegate '])
-        config.set_tag(ipv6_base + ['delegate '])
+        config.set(ipv6_base + ['delegate'])
+        config.set_tag(ipv6_base + ['delegate'])
 
         for p in prefix_old:
             prefix = p.split(',')[0]
             mask = p.split(',')[1]
-            config.set(ipv6_base + ['delegate', prefix, 'mask'], value=mask)
+            config.set(ipv6_base + ['delegate', prefix, 'delegate-prefix'], value=mask)
 
     try:
         with open(file_name, 'w') as f:
diff --git a/src/migration-scripts/pppoe-server/2-to-3 b/src/migration-scripts/pppoe-server/2-to-3
new file mode 100755
index 000000000..eb3e00b8b
--- /dev/null
+++ b/src/migration-scripts/pppoe-server/2-to-3
@@ -0,0 +1,114 @@
+#!/usr/bin/env python3
+#
+# Copyright (C) 2020 VyOS maintainers and contributors
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# - remove primary/secondary identifier from nameserver
+
+import os
+import sys
+
+from sys import argv, exit
+from vyos.configtree import ConfigTree
+
+if (len(argv) < 1):
+    print("Must specify file name!")
+    exit(1)
+
+file_name = argv[1]
+
+with open(file_name, 'r') as f:
+    config_file = f.read()
+
+config = ConfigTree(config_file)
+base = ['service', 'pppoe-server']
+if not config.exists(base):
+    # Nothing to do
+    exit(0)
+else:
+
+    # Migrate IPv4 DNS servers
+    dns_base = base + ['dns-servers']
+    if config.exists(dns_base):
+        for server in ['server-1', 'server-2']:
+          if config.exists(dns_base + [server]):
+            dns = config.return_value(dns_base + [server])
+            config.set(base + ['name-server'], value=dns, replace=False)
+
+        config.delete(dns_base)
+
+    # Migrate IPv6 DNS servers
+    dns_base = base + ['dnsv6-servers']
+    if config.exists(dns_base):
+        for server in ['server-1', 'server-2', 'server-3']:
+          if config.exists(dns_base + [server]):
+            dns = config.return_value(dns_base + [server])
+            config.set(base + ['name-server'], value=dns, replace=False)
+
+        config.delete(dns_base)
+
+    # Migrate IPv4 WINS servers
+    wins_base = base + ['wins-servers']
+    if config.exists(wins_base):
+        for server in ['server-1', 'server-2']:
+          if config.exists(wins_base + [server]):
+            wins = config.return_value(wins_base + [server])
+            config.set(base + ['wins-server'], value=wins, replace=False)
+
+        config.delete(wins_base)
+
+    # Remove RADIUS server req-limit node
+    radius_base = base + ['authentication', 'radius']
+    if config.exists(radius_base):
+        for server in config.list_nodes(radius_base + ['server']):
+            if config.exists(radius_base + ['server', server, 'req-limit']):
+                config.delete(radius_base + ['server', server, 'req-limit'])
+
+    # Migrate IPv6 prefixes
+    ipv6_base = base + ['client-ipv6-pool']
+    if config.exists(ipv6_base + ['prefix']):
+        prefix_old = config.return_values(ipv6_base + ['prefix'])
+        # delete old prefix CLI nodes
+        config.delete(ipv6_base + ['prefix'])
+        # create ned prefix tag node
+        config.set(ipv6_base + ['prefix'])
+        config.set_tag(ipv6_base + ['prefix'])
+
+        for p in prefix_old:
+            prefix = p.split(',')[0]
+            mask = p.split(',')[1]
+            config.set(ipv6_base + ['prefix', prefix, 'mask'], value=mask)
+
+    if config.exists(ipv6_base + ['delegate-prefix']):
+        prefix_old = config.return_values(ipv6_base + ['delegate-prefix'])
+        # delete old delegate prefix CLI nodes
+        config.delete(ipv6_base + ['delegate-prefix'])
+        # create ned delegation tag node
+        config.set(ipv6_base + ['delegate'])
+        config.set_tag(ipv6_base + ['delegate'])
+
+        for p in prefix_old:
+            prefix = p.split(',')[0]
+            mask = p.split(',')[1]
+            config.set(ipv6_base + ['delegate', prefix, 'delegation-prefix'], value=mask)
+
+    print(config.to_string())
+    exit(1)
+
+    try:
+        with open(file_name, 'w') as f:
+            f.write(config.to_string())
+    except OSError as e:
+        print("Failed to save the modified config: {}".format(e))
+        exit(1)