snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 0 insertions, 1472 deletions

diff --git a/data/mibs/BRIDGE-MIB.txt b/data/mibs/BRIDGE-MIB.txt
deleted file mode 100644
index 1e77a190f..000000000
--- a/data/mibs/BRIDGE-MIB.txt
+++ /dev/null
@@ -1,1472 +0,0 @@
-BRIDGE-MIB DEFINITIONS ::= BEGIN
-
--- ---------------------------------------------------------- --
--- MIB for IEEE 802.1D devices
--- ---------------------------------------------------------- --
-IMPORTS
-    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-    Counter32, Integer32, TimeTicks, mib-2
-        FROM SNMPv2-SMI
-    TEXTUAL-CONVENTION, MacAddress
-        FROM SNMPv2-TC
-    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
-        FROM SNMPv2-CONF
-    InterfaceIndex FROM IF-MIB
-    ;
-
-dot1dBridge MODULE-IDENTITY
-    LAST-UPDATED "200509190000Z"
-    ORGANIZATION "IETF Bridge MIB Working Group"
-    CONTACT-INFO
-        "Email: bridge-mib@ietf.org
-
-                 K.C. Norseth (Editor)
-                 L-3 Communications
-            Tel: +1 801-594-2809
-          Email: kenyon.c.norseth@L-3com.com
-         Postal: 640 N. 2200 West.
-                 Salt Lake City, Utah 84116-0850
-
-                 Les Bell (Editor)
-                 3Com Europe Limited
-          Phone: +44 1442 438025
-          Email: elbell@ntlworld.com
-         Postal: 3Com Centre, Boundary Way
-                 Hemel Hempstead
-                 Herts.  HP2 7YU
-                 UK
-
-         Send comments to <bridge-mib@ietf.org>"
-    DESCRIPTION
-        "The Bridge MIB module for managing devices that support
-        IEEE 802.1D.
-
-        Copyright (C) The Internet Society (2005).  This version of
-        this MIB module is part of RFC 4188; see the RFC itself for
-        full legal notices."
-    REVISION     "200509190000Z"
-    DESCRIPTION
-         "Third revision, published as part of RFC 4188.
-
-         The MIB module has been converted to SMIv2 format.
-         Conformance statements have been added and some
-         description and reference clauses have been updated.
-
-         The object dot1dStpPortPathCost32 was added to
-         support IEEE 802.1t and the permissible values of
-         dot1dStpPriority and dot1dStpPortPriority have been
-         clarified for bridges supporting IEEE 802.1t or
-         IEEE 802.1w.
-
-         The interpretation of dot1dStpTimeSinceTopologyChange
-         has been clarified for bridges supporting the Rapid
-         Spanning Tree Protocol (RSTP)."
-    REVISION     "199307310000Z"
-    DESCRIPTION
-         "Second revision, published as part of RFC 1493."
-    REVISION     "199112310000Z"
-    DESCRIPTION
-         "Initial revision, published as part of RFC 1286."
-    ::= { mib-2 17 }
-
--- ---------------------------------------------------------- --
--- Textual Conventions
--- ---------------------------------------------------------- --
-
-BridgeId ::= TEXTUAL-CONVENTION
-    STATUS      current
-    DESCRIPTION
-        "The Bridge-Identifier, as used in the Spanning Tree
-        Protocol, to uniquely identify a bridge.  Its first two
-        octets (in network byte order) contain a priority value,
-        and its last 6 octets contain the MAC address used to
-        refer to a bridge in a unique fashion (typically, the
-        numerically smallest MAC address of all ports on the
-        bridge)."
-    SYNTAX      OCTET STRING (SIZE (8))
-
-Timeout ::= TEXTUAL-CONVENTION
-    DISPLAY-HINT "d"
-    STATUS      current
-    DESCRIPTION
-        "A Spanning Tree Protocol (STP) timer in units of 1/100
-        seconds.  Several objects in this MIB module represent
-        values of timers used by the Spanning Tree Protocol.
-        In this MIB, these timers have values in units of
-        hundredths of a second (i.e., 1/100 secs).
-
-        These timers, when stored in a Spanning Tree Protocol's
-        BPDU, are in units of 1/256 seconds.  Note, however, that
-        802.1D-1998 specifies a settable granularity of no more
-        than one second for these timers.  To avoid ambiguity,
-        a conversion algorithm is defined below for converting
-        between the different units, which ensures a timer's
-        value is not distorted by multiple conversions.
-
-        To convert a Timeout value into a value in units of
-        1/256 seconds, the following algorithm should be used:
-
-            b = floor( (n * 256) / 100)
-
-        where:
-            floor   =  quotient [ignore remainder]
-            n is the value in 1/100 second units
-            b is the value in 1/256 second units
-
-        To convert the value from 1/256 second units back to
-        1/100 seconds, the following algorithm should be used:
-
-            n = ceiling( (b * 100) / 256)
-
-        where:
-            ceiling = quotient [if remainder is 0], or
-                      quotient + 1 [if remainder is nonzero]
-            n is the value in 1/100 second units
-
-            b is the value in 1/256 second units
-
-        Note: it is important that the arithmetic operations are
-        done in the order specified (i.e., multiply first,
-        divide second)."
-    SYNTAX      Integer32
-
--- ---------------------------------------------------------- --
--- subtrees in the Bridge MIB
--- ---------------------------------------------------------- --
-
-dot1dNotifications  OBJECT IDENTIFIER ::= { dot1dBridge 0 }
-
-dot1dBase           OBJECT IDENTIFIER ::= { dot1dBridge 1 }
-dot1dStp            OBJECT IDENTIFIER ::= { dot1dBridge 2 }
-
-dot1dSr             OBJECT IDENTIFIER ::= { dot1dBridge 3 }
--- documented in RFC 1525
-
-dot1dTp             OBJECT IDENTIFIER ::= { dot1dBridge 4 }
-dot1dStatic         OBJECT IDENTIFIER ::= { dot1dBridge 5 }
-
--- Subtrees used by Bridge MIB Extensions:
---      pBridgeMIB  MODULE-IDENTITY   ::= { dot1dBridge 6 }
---      qBridgeMIB  MODULE-IDENTITY   ::= { dot1dBridge 7 }
--- Note that the practice of registering related MIB modules
--- below dot1dBridge has been discouraged since there is no
--- robust mechanism to track such registrations.
-
-dot1dConformance    OBJECT IDENTIFIER ::= { dot1dBridge 8 }
-
--- ---------------------------------------------------------- --
--- the dot1dBase subtree
--- ---------------------------------------------------------- --
--- Implementation of the dot1dBase subtree is mandatory for all
--- bridges.
--- ---------------------------------------------------------- --
-
-dot1dBaseBridgeAddress OBJECT-TYPE
-    SYNTAX      MacAddress
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The MAC address used by this bridge when it must be
-        referred to in a unique fashion.  It is recommended
-        that this be the numerically smallest MAC address of
-        all ports that belong to this bridge.  However, it is only
-
-        required to be unique.  When concatenated with
-        dot1dStpPriority, a unique BridgeIdentifier is formed,
-        which is used in the Spanning Tree Protocol."
-    REFERENCE
-        "IEEE 802.1D-1998: clauses 14.4.1.1.3 and 7.12.5"
-    ::= { dot1dBase 1 }
-
-dot1dBaseNumPorts OBJECT-TYPE
-    SYNTAX      Integer32
-    UNITS       "ports"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The number of ports controlled by this bridging
-        entity."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.4.1.1.3"
-    ::= { dot1dBase 2 }
-
-dot1dBaseType OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    unknown(1),
-                    transparent-only(2),
-                    sourceroute-only(3),
-                    srt(4)
-                }
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Indicates what type of bridging this bridge can
-        perform.  If a bridge is actually performing a
-        certain type of bridging, this will be indicated by
-        entries in the port table for the given type."
-    ::= { dot1dBase 3 }
-
--- ---------------------------------------------------------- --
--- The Generic Bridge Port Table
--- ---------------------------------------------------------- --
-dot1dBasePortTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF Dot1dBasePortEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A table that contains generic information about every
-        port that is associated with this bridge.  Transparent,
-        source-route, and srt ports are included."
-    ::= { dot1dBase 4 }
-
-dot1dBasePortEntry OBJECT-TYPE
-    SYNTAX      Dot1dBasePortEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A list of information for each port of the bridge."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.4.2, 14.6.1"
-    INDEX  { dot1dBasePort }
-    ::= { dot1dBasePortTable 1 }
-
-Dot1dBasePortEntry ::=
-    SEQUENCE {
-        dot1dBasePort
-            Integer32,
-        dot1dBasePortIfIndex
-            InterfaceIndex,
-        dot1dBasePortCircuit
-            OBJECT IDENTIFIER,
-        dot1dBasePortDelayExceededDiscards
-            Counter32,
-        dot1dBasePortMtuExceededDiscards
-            Counter32
-    }
-
-dot1dBasePort OBJECT-TYPE
-    SYNTAX      Integer32 (1..65535)
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The port number of the port for which this entry
-        contains bridge management information."
-    ::= { dot1dBasePortEntry 1 }
-
-dot1dBasePortIfIndex OBJECT-TYPE
-    SYNTAX      InterfaceIndex
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The value of the instance of the ifIndex object,
-        defined in IF-MIB, for the interface corresponding
-        to this port."
-    ::= { dot1dBasePortEntry 2 }
-
-dot1dBasePortCircuit OBJECT-TYPE
-    SYNTAX      OBJECT IDENTIFIER
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "For a port that (potentially) has the same value of
-        dot1dBasePortIfIndex as another port on the same bridge.
-        This object contains the name of an object instance
-        unique to this port.  For example, in the case where
-        multiple ports correspond one-to-one with multiple X.25
-        virtual circuits, this value might identify an (e.g.,
-        the first) object instance associated with the X.25
-        virtual circuit corresponding to this port.
-
-        For a port which has a unique value of
-        dot1dBasePortIfIndex, this object can have the value
-        { 0 0 }."
-    ::= { dot1dBasePortEntry 3 }
-
-dot1dBasePortDelayExceededDiscards OBJECT-TYPE
-    SYNTAX      Counter32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The number of frames discarded by this port due
-        to excessive transit delay through the bridge.  It
-        is incremented by both transparent and source
-        route bridges."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.6.1.1.3"
-    ::= { dot1dBasePortEntry 4 }
-
-dot1dBasePortMtuExceededDiscards OBJECT-TYPE
-    SYNTAX      Counter32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The number of frames discarded by this port due
-        to an excessive size.  It is incremented by both
-        transparent and source route bridges."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.6.1.1.3"
-    ::= { dot1dBasePortEntry 5 }
-
--- ---------------------------------------------------------- --
--- the dot1dStp subtree
--- ---------------------------------------------------------- --
--- Implementation of the dot1dStp subtree is optional.  It is
--- implemented by those bridges that support the Spanning Tree
--- Protocol.
--- ---------------------------------------------------------- --
-
-dot1dStpProtocolSpecification OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    unknown(1),
-                    decLb100(2),
-                    ieee8021d(3)
-                }
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "An indication of what version of the Spanning Tree
-        Protocol is being run.  The value 'decLb100(2)'
-        indicates the DEC LANbridge 100 Spanning Tree protocol.
-        IEEE 802.1D implementations will return 'ieee8021d(3)'.
-        If future versions of the IEEE Spanning Tree Protocol
-        that are incompatible with the current version
-        are released a new value will be defined."
-    ::= { dot1dStp 1 }
-
-dot1dStpPriority OBJECT-TYPE
-    SYNTAX      Integer32 (0..65535)
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The value of the write-able portion of the Bridge ID
-        (i.e., the first two octets of the (8 octet long) Bridge
-        ID).  The other (last) 6 octets of the Bridge ID are
-        given by the value of dot1dBaseBridgeAddress.
-        On bridges supporting IEEE 802.1t or IEEE 802.1w,
-        permissible values are 0-61440, in steps of 4096."
-    REFERENCE
-        "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
-        IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
-    ::= { dot1dStp 2 }
-
-dot1dStpTimeSinceTopologyChange OBJECT-TYPE
-    SYNTAX      TimeTicks
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The time (in hundredths of a second) since the
-        last time a topology change was detected by the
-        bridge entity.
-        For RSTP, this reports the time since the tcWhile
-        timer for any port on this Bridge was nonzero."
-    REFERENCE
-        "IEEE 802.1D-1998 clause 14.8.1.1.,
-        IEEE 802.1w clause 14.8.1.1."
-    ::= { dot1dStp 3 }
-
-dot1dStpTopChanges OBJECT-TYPE
-    SYNTAX      Counter32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The total number of topology changes detected by
-        this bridge since the management entity was last
-        reset or initialized."
-    REFERENCE
-        "IEEE 802.1D-1998 clause 14.8.1.1."
-    ::= { dot1dStp 4 }
-
-dot1dStpDesignatedRoot OBJECT-TYPE
-    SYNTAX      BridgeId
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The bridge identifier of the root of the spanning
-        tree, as determined by the Spanning Tree Protocol,
-        as executed by this node.  This value is used as
-        the Root Identifier parameter in all Configuration
-        Bridge PDUs originated by this node."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.1"
-    ::= { dot1dStp 5 }
-
-dot1dStpRootCost OBJECT-TYPE
-    SYNTAX      Integer32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The cost of the path to the root as seen from
-        this bridge."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.2"
-    ::= { dot1dStp 6 }
-
-dot1dStpRootPort OBJECT-TYPE
-    SYNTAX      Integer32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The port number of the port that offers the lowest
-        cost path from this bridge to the root bridge."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.3"
-    ::= { dot1dStp 7 }
-
-dot1dStpMaxAge OBJECT-TYPE
-    SYNTAX      Timeout
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The maximum age of Spanning Tree Protocol information
-        learned from the network on any port before it is
-        discarded, in units of hundredths of a second.  This is
-        the actual value that this bridge is currently using."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.4"
-    ::= { dot1dStp 8 }
-
-dot1dStpHelloTime OBJECT-TYPE
-    SYNTAX      Timeout
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The amount of time between the transmission of
-        Configuration bridge PDUs by this node on any port when
-        it is the root of the spanning tree, or trying to become
-        so, in units of hundredths of a second.  This is the
-        actual value that this bridge is currently using."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.5"
-    ::= { dot1dStp 9 }
-
-dot1dStpHoldTime OBJECT-TYPE
-    SYNTAX      Integer32
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This time value determines the interval length
-        during which no more than two Configuration bridge
-        PDUs shall be transmitted by this node, in units
-        of hundredths of a second."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.14"
-    ::= { dot1dStp 10 }
-
-dot1dStpForwardDelay OBJECT-TYPE
-    SYNTAX      Timeout
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This time value, measured in units of hundredths of a
-        second, controls how fast a port changes its spanning
-        state when moving towards the Forwarding state.  The
-        value determines how long the port stays in each of the
-        Listening and Learning states, which precede the
-        Forwarding state.  This value is also used when a
-        topology change has been detected and is underway, to
-        age all dynamic entries in the Forwarding Database.
-        [Note that this value is the one that this bridge is
-        currently using, in contrast to
-        dot1dStpBridgeForwardDelay, which is the value that this
-        bridge and all others would start using if/when this
-        bridge were to become the root.]"
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.6"
-    ::= { dot1dStp 11 }
-
-dot1dStpBridgeMaxAge OBJECT-TYPE
-    SYNTAX      Timeout (600..4000)
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The value that all bridges use for MaxAge when this
-        bridge is acting as the root.  Note that 802.1D-1998
-        specifies that the range for this parameter is related
-        to the value of dot1dStpBridgeHelloTime.  The
-        granularity of this timer is specified by 802.1D-1998 to
-        be 1 second.  An agent may return a badValue error if a
-        set is attempted to a value that is not a whole number
-        of seconds."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.8"
-    ::= { dot1dStp 12 }
-
-dot1dStpBridgeHelloTime OBJECT-TYPE
-    SYNTAX      Timeout (100..1000)
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The value that all bridges use for HelloTime when this
-        bridge is acting as the root.  The granularity of this
-        timer is specified by 802.1D-1998 to be 1 second.  An
-        agent may return a badValue error if a set is attempted
-
-        to a value that is not a whole number of seconds."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.9"
-    ::= { dot1dStp 13 }
-
-dot1dStpBridgeForwardDelay OBJECT-TYPE
-    SYNTAX      Timeout (400..3000)
-    UNITS       "centi-seconds"
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The value that all bridges use for ForwardDelay when
-        this bridge is acting as the root.  Note that
-        802.1D-1998 specifies that the range for this parameter
-        is related to the value of dot1dStpBridgeMaxAge.  The
-        granularity of this timer is specified by 802.1D-1998 to
-        be 1 second.  An agent may return a badValue error if a
-        set is attempted to a value that is not a whole number
-        of seconds."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.3.10"
-    ::= { dot1dStp 14 }
-
--- ---------------------------------------------------------- --
--- The Spanning Tree Port Table
--- ---------------------------------------------------------- --
-
-dot1dStpPortTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF Dot1dStpPortEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A table that contains port-specific information
-        for the Spanning Tree Protocol."
-    ::= { dot1dStp 15 }
-
-dot1dStpPortEntry OBJECT-TYPE
-    SYNTAX      Dot1dStpPortEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A list of information maintained by every port about
-        the Spanning Tree Protocol state for that port."
-    INDEX   { dot1dStpPort }
-    ::= { dot1dStpPortTable 1 }
-
-Dot1dStpPortEntry ::=
-    SEQUENCE {
-
-        dot1dStpPort
-            Integer32,
-        dot1dStpPortPriority
-            Integer32,
-        dot1dStpPortState
-            INTEGER,
-        dot1dStpPortEnable
-            INTEGER,
-        dot1dStpPortPathCost
-            Integer32,
-        dot1dStpPortDesignatedRoot
-            BridgeId,
-        dot1dStpPortDesignatedCost
-            Integer32,
-        dot1dStpPortDesignatedBridge
-            BridgeId,
-        dot1dStpPortDesignatedPort
-            OCTET STRING,
-        dot1dStpPortForwardTransitions
-            Counter32,
-        dot1dStpPortPathCost32
-            Integer32
-    }
-
-dot1dStpPort OBJECT-TYPE
-    SYNTAX      Integer32 (1..65535)
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The port number of the port for which this entry
-        contains Spanning Tree Protocol management information."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.8.2.1.2"
-    ::= { dot1dStpPortEntry 1 }
-
-dot1dStpPortPriority OBJECT-TYPE
-    SYNTAX      Integer32 (0..255)
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The value of the priority field that is contained in
-        the first (in network byte order) octet of the (2 octet
-        long) Port ID.  The other octet of the Port ID is given
-        by the value of dot1dStpPort.
-        On bridges supporting IEEE 802.1t or IEEE 802.1w,
-        permissible values are 0-240, in steps of 16."
-    REFERENCE
-        "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
-        IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
-    ::= { dot1dStpPortEntry 2 }
-
-dot1dStpPortState OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    disabled(1),
-                    blocking(2),
-                    listening(3),
-                    learning(4),
-                    forwarding(5),
-                    broken(6)
-                }
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The port's current state, as defined by application of
-        the Spanning Tree Protocol.  This state controls what
-        action a port takes on reception of a frame.  If the
-        bridge has detected a port that is malfunctioning, it
-        will place that port into the broken(6) state.  For
-        ports that are disabled (see dot1dStpPortEnable), this
-        object will have a value of disabled(1)."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.5.2"
-    ::= { dot1dStpPortEntry 3 }
-
-dot1dStpPortEnable OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    enabled(1),
-                    disabled(2)
-                }
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The enabled/disabled status of the port."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.5.2"
-    ::= { dot1dStpPortEntry 4 }
-
-dot1dStpPortPathCost OBJECT-TYPE
-    SYNTAX      Integer32 (1..65535)
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The contribution of this port to the path cost of
-        paths towards the spanning tree root which include
-        this port.  802.1D-1998 recommends that the default
-        value of this parameter be in inverse proportion to
-
-        the speed of the attached LAN.
-
-        New implementations should support dot1dStpPortPathCost32.
-        If the port path costs exceeds the maximum value of this
-        object then this object should report the maximum value,
-        namely 65535.  Applications should try to read the
-        dot1dStpPortPathCost32 object if this object reports
-        the maximum value."
-    REFERENCE "IEEE 802.1D-1998: clause 8.5.5.3"
-        ::= { dot1dStpPortEntry 5 }
-
-dot1dStpPortDesignatedRoot OBJECT-TYPE
-    SYNTAX      BridgeId
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The unique Bridge Identifier of the Bridge
-        recorded as the Root in the Configuration BPDUs
-        transmitted by the Designated Bridge for the
-        segment to which the port is attached."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.5.4"
-    ::= { dot1dStpPortEntry 6 }
-
-dot1dStpPortDesignatedCost OBJECT-TYPE
-    SYNTAX      Integer32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The path cost of the Designated Port of the segment
-        connected to this port.  This value is compared to the
-        Root Path Cost field in received bridge PDUs."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.5.5"
-    ::= { dot1dStpPortEntry 7 }
-
-dot1dStpPortDesignatedBridge OBJECT-TYPE
-    SYNTAX      BridgeId
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The Bridge Identifier of the bridge that this
-        port considers to be the Designated Bridge for
-        this port's segment."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.5.6"
-    ::= { dot1dStpPortEntry 8 }
-
-dot1dStpPortDesignatedPort OBJECT-TYPE
-    SYNTAX      OCTET STRING (SIZE (2))
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The Port Identifier of the port on the Designated
-        Bridge for this port's segment."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 8.5.5.7"
-    ::= { dot1dStpPortEntry 9 }
-
-dot1dStpPortForwardTransitions OBJECT-TYPE
-    SYNTAX      Counter32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The number of times this port has transitioned
-        from the Learning state to the Forwarding state."
-    ::= { dot1dStpPortEntry 10 }
-
-dot1dStpPortPathCost32 OBJECT-TYPE
-    SYNTAX      Integer32 (1..200000000)
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The contribution of this port to the path cost of
-        paths towards the spanning tree root which include
-        this port.  802.1D-1998 recommends that the default
-        value of this parameter be in inverse proportion to
-        the speed of the attached LAN.
-
-        This object replaces dot1dStpPortPathCost to support
-        IEEE 802.1t."
-    REFERENCE
-        "IEEE 802.1t clause 8.10.2, Table 8-5."
-    ::= { dot1dStpPortEntry 11 }
-
--- ---------------------------------------------------------- --
--- the dot1dTp subtree
--- ---------------------------------------------------------- --
--- Implementation of the dot1dTp subtree is optional.  It is
--- implemented by those bridges that support the transparent
--- bridging mode.  A transparent or SRT bridge will implement
--- this subtree.
--- ---------------------------------------------------------- --
-
-dot1dTpLearnedEntryDiscards OBJECT-TYPE
-    SYNTAX      Counter32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The total number of Forwarding Database entries that
-        have been or would have been learned, but have been
-        discarded due to a lack of storage space in the
-        Forwarding Database.  If this counter is increasing, it
-        indicates that the Forwarding Database is regularly
-        becoming full (a condition that has unpleasant
-        performance effects on the subnetwork).  If this counter
-        has a significant value but is not presently increasing,
-        it indicates that the problem has been occurring but is
-        not persistent."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.7.1.1.3"
-    ::= { dot1dTp 1 }
-
-dot1dTpAgingTime OBJECT-TYPE
-    SYNTAX      Integer32 (10..1000000)
-    UNITS       "seconds"
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-        "The timeout period in seconds for aging out
-        dynamically-learned forwarding information.
-        802.1D-1998 recommends a default of 300 seconds."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.7.1.1.3"
-    ::= { dot1dTp 2 }
-
--- ---------------------------------------------------------- --
---  The Forwarding Database for Transparent Bridges
--- ---------------------------------------------------------- --
-
-dot1dTpFdbTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF Dot1dTpFdbEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A table that contains information about unicast
-        entries for which the bridge has forwarding and/or
-        filtering information.  This information is used
-        by the transparent bridging function in
-        determining how to propagate a received frame."
-    ::= { dot1dTp 3 }
-
-dot1dTpFdbEntry OBJECT-TYPE
-    SYNTAX      Dot1dTpFdbEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Information about a specific unicast MAC address
-        for which the bridge has some forwarding and/or
-        filtering information."
-    INDEX   { dot1dTpFdbAddress }
-    ::= { dot1dTpFdbTable 1 }
-
-Dot1dTpFdbEntry ::=
-    SEQUENCE {
-        dot1dTpFdbAddress
-            MacAddress,
-        dot1dTpFdbPort
-            Integer32,
-        dot1dTpFdbStatus
-            INTEGER
-    }
-
-dot1dTpFdbAddress OBJECT-TYPE
-    SYNTAX      MacAddress
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "A unicast MAC address for which the bridge has
-        forwarding and/or filtering information."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
-    ::= { dot1dTpFdbEntry 1 }
-
-dot1dTpFdbPort OBJECT-TYPE
-    SYNTAX      Integer32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Either the value '0', or the port number of the port on
-        which a frame having a source address equal to the value
-        of the corresponding instance of dot1dTpFdbAddress has
-        been seen.  A value of '0' indicates that the port
-        number has not been learned, but that the bridge does
-        have some forwarding/filtering information about this
-        address (e.g., in the dot1dStaticTable).  Implementors
-        are encouraged to assign the port value to this object
-        whenever it is learned, even for addresses for which the
-        corresponding value of dot1dTpFdbStatus is not
-        learned(3)."
-    ::= { dot1dTpFdbEntry 2 }
-
-dot1dTpFdbStatus OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    other(1),
-                    invalid(2),
-                    learned(3),
-                    self(4),
-                    mgmt(5)
-                }
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The status of this entry.  The meanings of the
-        values are:
-            other(1) - none of the following.  This would
-                include the case where some other MIB object
-                (not the corresponding instance of
-                dot1dTpFdbPort, nor an entry in the
-                dot1dStaticTable) is being used to determine if
-                and how frames addressed to the value of the
-                corresponding instance of dot1dTpFdbAddress are
-                being forwarded.
-            invalid(2) - this entry is no longer valid (e.g.,
-                it was learned but has since aged out), but has
-                not yet been flushed from the table.
-            learned(3) - the value of the corresponding instance
-                of dot1dTpFdbPort was learned, and is being
-                used.
-            self(4) - the value of the corresponding instance of
-                dot1dTpFdbAddress represents one of the bridge's
-                addresses.  The corresponding instance of
-                dot1dTpFdbPort indicates which of the bridge's
-                ports has this address.
-            mgmt(5) - the value of the corresponding instance of
-                dot1dTpFdbAddress is also the value of an
-                existing instance of dot1dStaticAddress."
-    ::= { dot1dTpFdbEntry 3 }
-
--- ---------------------------------------------------------- --
---  Port Table for Transparent Bridges
--- ---------------------------------------------------------- --
-
-dot1dTpPortTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF Dot1dTpPortEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A table that contains information about every port that
-        is associated with this transparent bridge."
-    ::= { dot1dTp 4 }
-
-dot1dTpPortEntry OBJECT-TYPE
-    SYNTAX      Dot1dTpPortEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A list of information for each port of a transparent
-        bridge."
-    INDEX   { dot1dTpPort }
-    ::= { dot1dTpPortTable 1 }
-
-Dot1dTpPortEntry ::=
-    SEQUENCE {
-        dot1dTpPort
-            Integer32,
-        dot1dTpPortMaxInfo
-            Integer32,
-        dot1dTpPortInFrames
-            Counter32,
-        dot1dTpPortOutFrames
-            Counter32,
-        dot1dTpPortInDiscards
-            Counter32
-    }
-
-dot1dTpPort OBJECT-TYPE
-    SYNTAX      Integer32 (1..65535)
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The port number of the port for which this entry
-        contains Transparent bridging management information."
-    ::= { dot1dTpPortEntry 1 }
-
--- It would be nice if we could use ifMtu as the size of the
--- largest INFO field, but we can't because ifMtu is defined
--- to be the size that the (inter-)network layer can use, which
--- can differ from the MAC layer (especially if several layers
--- of encapsulation are used).
-
-dot1dTpPortMaxInfo OBJECT-TYPE
-    SYNTAX      Integer32
-    UNITS       "bytes"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The maximum size of the INFO (non-MAC) field that
-
-        this port will receive or transmit."
-    ::= { dot1dTpPortEntry 2 }
-
-dot1dTpPortInFrames OBJECT-TYPE
-    SYNTAX      Counter32
-    UNITS       "frames"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The number of frames that have been received by this
-        port from its segment.  Note that a frame received on the
-        interface corresponding to this port is only counted by
-        this object if and only if it is for a protocol being
-        processed by the local bridging function, including
-        bridge management frames."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.6.1.1.3"
-    ::= { dot1dTpPortEntry 3 }
-
-dot1dTpPortOutFrames OBJECT-TYPE
-    SYNTAX      Counter32
-    UNITS       "frames"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The number of frames that have been transmitted by this
-        port to its segment.  Note that a frame transmitted on
-        the interface corresponding to this port is only counted
-        by this object if and only if it is for a protocol being
-        processed by the local bridging function, including
-        bridge management frames."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.6.1.1.3"
-    ::= { dot1dTpPortEntry 4 }
-
-dot1dTpPortInDiscards OBJECT-TYPE
-    SYNTAX      Counter32
-    UNITS       "frames"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Count of received valid frames that were discarded
-        (i.e., filtered) by the Forwarding Process."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.6.1.1.3"
-    ::= { dot1dTpPortEntry 5 }
-
--- ---------------------------------------------------------- --
-
--- The Static (Destination-Address Filtering) Database
--- ---------------------------------------------------------- --
--- Implementation of this subtree is optional.
--- ---------------------------------------------------------- --
-
-dot1dStaticTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF Dot1dStaticEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "A table containing filtering information configured
-        into the bridge by (local or network) management
-        specifying the set of ports to which frames received
-        from specific ports and containing specific destination
-        addresses are allowed to be forwarded.  The value of
-        zero in this table, as the port number from which frames
-        with a specific destination address are received, is
-        used to specify all ports for which there is no specific
-        entry in this table for that particular destination
-        address.  Entries are valid for unicast and for
-        group/broadcast addresses."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.7.2"
-    ::= { dot1dStatic 1 }
-
-dot1dStaticEntry OBJECT-TYPE
-    SYNTAX      Dot1dStaticEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Filtering information configured into the bridge by
-        (local or network) management specifying the set of
-        ports to which frames received from a specific port and
-        containing a specific destination address are allowed to
-        be forwarded."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 14.7.2"
-    INDEX   { dot1dStaticAddress, dot1dStaticReceivePort }
-    ::= { dot1dStaticTable 1 }
-
-Dot1dStaticEntry ::=
-    SEQUENCE {
-        dot1dStaticAddress       MacAddress,
-        dot1dStaticReceivePort   Integer32,
-        dot1dStaticAllowedToGoTo OCTET STRING,
-        dot1dStaticStatus        INTEGER
-    }
-
-dot1dStaticAddress OBJECT-TYPE
-    SYNTAX      MacAddress
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The destination MAC address in a frame to which this
-        entry's filtering information applies.  This object can
-        take the value of a unicast address, a group address, or
-        the broadcast address."
-    REFERENCE
-        "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
-    ::= { dot1dStaticEntry 1 }
-
-dot1dStaticReceivePort OBJECT-TYPE
-    SYNTAX      Integer32 (0..65535)
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Either the value '0', or the port number of the port
-        from which a frame must be received in order for this
-        entry's filtering information to apply.  A value of zero
-        indicates that this entry applies on all ports of the
-        bridge for which there is no other applicable entry."
-    ::= { dot1dStaticEntry 2 }
-
-dot1dStaticAllowedToGoTo OBJECT-TYPE
-    SYNTAX      OCTET STRING (SIZE (0..512))
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The set of ports to which frames received from a
-        specific port and destined for a specific MAC address,
-        are allowed to be forwarded.  Each octet within the
-        value of this object specifies a set of eight ports,
-        with the first octet specifying ports 1 through 8, the
-        second octet specifying ports 9 through 16, etc.  Within
-        each octet, the most significant bit represents the
-        lowest numbered port, and the least significant bit
-        represents the highest numbered port.  Thus, each port
-        of the bridge is represented by a single bit within the
-        value of this object.  If that bit has a value of '1',
-        then that port is included in the set of ports; the port
-        is not included if its bit has a value of '0'.  (Note
-        that the setting of the bit corresponding to the port
-        from which a frame is received is irrelevant.)  The
-        default value of this object is a string of ones of
-        appropriate length.
-
-        The value of this object may exceed the required minimum
-        maximum message size of some SNMP transport (484 bytes,
-        in the case of SNMP over UDP, see RFC 3417, section 3.2).
-        SNMP engines on bridges supporting a large number of
-        ports must support appropriate maximum message sizes."
-    ::= { dot1dStaticEntry 3 }
-
-dot1dStaticStatus OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    other(1),
-                    invalid(2),
-                    permanent(3),
-                    deleteOnReset(4),
-                    deleteOnTimeout(5)
-                }
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "This object indicates the status of this entry.
-        The default value is permanent(3).
-            other(1) - this entry is currently in use but the
-                conditions under which it will remain so are
-                different from each of the following values.
-            invalid(2) - writing this value to the object
-                removes the corresponding entry.
-            permanent(3) - this entry is currently in use and
-                will remain so after the next reset of the
-                bridge.
-            deleteOnReset(4) - this entry is currently in use
-                and will remain so until the next reset of the
-                bridge.
-            deleteOnTimeout(5) - this entry is currently in use
-                and will remain so until it is aged out."
-    ::= { dot1dStaticEntry 4 }
-
--- ---------------------------------------------------------- --
--- Notifications for use by Bridges
--- ---------------------------------------------------------- --
--- Notifications for the Spanning Tree Protocol
--- ---------------------------------------------------------- --
-
-newRoot NOTIFICATION-TYPE
-    -- OBJECTS     { }
-    STATUS      current
-    DESCRIPTION
-        "The newRoot trap indicates that the sending agent has
-        become the new root of the Spanning Tree; the trap is
-        sent by a bridge soon after its election as the new
-
-        root, e.g., upon expiration of the Topology Change Timer,
-        immediately subsequent to its election.  Implementation
-        of this trap is optional."
-    ::= { dot1dNotifications 1 }
-
-topologyChange NOTIFICATION-TYPE
-    -- OBJECTS     { }
-    STATUS      current
-    DESCRIPTION
-        "A topologyChange trap is sent by a bridge when any of
-        its configured ports transitions from the Learning state
-        to the Forwarding state, or from the Forwarding state to
-        the Blocking state.  The trap is not sent if a newRoot
-        trap is sent for the same transition.  Implementation of
-        this trap is optional."
-    ::= { dot1dNotifications 2 }
-
--- ---------------------------------------------------------- --
--- IEEE 802.1D MIB - Conformance Information
--- ---------------------------------------------------------- --
-
-dot1dGroups         OBJECT IDENTIFIER ::= { dot1dConformance 1 }
-dot1dCompliances    OBJECT IDENTIFIER ::= { dot1dConformance 2 }
-
--- ---------------------------------------------------------- --
--- units of conformance
--- ---------------------------------------------------------- --
-
--- ---------------------------------------------------------- --
--- the dot1dBase group
--- ---------------------------------------------------------- --
-
-dot1dBaseBridgeGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dBaseBridgeAddress,
-        dot1dBaseNumPorts,
-        dot1dBaseType
-    }
-    STATUS      current
-    DESCRIPTION
-        "Bridge level information for this device."
-    ::= { dot1dGroups 1 }
-
-dot1dBasePortGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dBasePort,
-        dot1dBasePortIfIndex,
-        dot1dBasePortCircuit,
-        dot1dBasePortDelayExceededDiscards,
-        dot1dBasePortMtuExceededDiscards
-    }
-    STATUS      current
-    DESCRIPTION
-        "Information for each port on this device."
-    ::= { dot1dGroups 2 }
-
--- ---------------------------------------------------------- --
--- the dot1dStp group
--- ---------------------------------------------------------- --
-
-dot1dStpBridgeGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dStpProtocolSpecification,
-        dot1dStpPriority,
-        dot1dStpTimeSinceTopologyChange,
-        dot1dStpTopChanges,
-        dot1dStpDesignatedRoot,
-        dot1dStpRootCost,
-        dot1dStpRootPort,
-        dot1dStpMaxAge,
-        dot1dStpHelloTime,
-        dot1dStpHoldTime,
-        dot1dStpForwardDelay,
-        dot1dStpBridgeMaxAge,
-        dot1dStpBridgeHelloTime,
-        dot1dStpBridgeForwardDelay
-    }
-    STATUS      current
-    DESCRIPTION
-        "Bridge level Spanning Tree data for this device."
-    ::= { dot1dGroups 3 }
-
-dot1dStpPortGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dStpPort,
-        dot1dStpPortPriority,
-        dot1dStpPortState,
-        dot1dStpPortEnable,
-        dot1dStpPortPathCost,
-        dot1dStpPortDesignatedRoot,
-        dot1dStpPortDesignatedCost,
-        dot1dStpPortDesignatedBridge,
-        dot1dStpPortDesignatedPort,
-        dot1dStpPortForwardTransitions
-    }
-    STATUS      current
-    DESCRIPTION
-        "Spanning Tree data for each port on this device."
-    ::= { dot1dGroups 4 }
-
-dot1dStpPortGroup2 OBJECT-GROUP
-    OBJECTS {
-        dot1dStpPort,
-        dot1dStpPortPriority,
-        dot1dStpPortState,
-        dot1dStpPortEnable,
-        dot1dStpPortDesignatedRoot,
-        dot1dStpPortDesignatedCost,
-        dot1dStpPortDesignatedBridge,
-        dot1dStpPortDesignatedPort,
-        dot1dStpPortForwardTransitions,
-        dot1dStpPortPathCost32
-    }
-    STATUS      current
-    DESCRIPTION
-        "Spanning Tree data for each port on this device."
-    ::= { dot1dGroups 5 }
-
-dot1dStpPortGroup3 OBJECT-GROUP
-    OBJECTS {
-        dot1dStpPortPathCost32
-    }
-    STATUS      current
-    DESCRIPTION
-        "Spanning Tree data for devices supporting 32-bit
-         path costs."
-    ::= { dot1dGroups 6 }
-
--- ---------------------------------------------------------- --
--- the dot1dTp group
--- ---------------------------------------------------------- --
-
-dot1dTpBridgeGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dTpLearnedEntryDiscards,
-        dot1dTpAgingTime
-    }
-    STATUS      current
-    DESCRIPTION
-        "Bridge level Transparent Bridging data."
-    ::= { dot1dGroups 7 }
-
-dot1dTpFdbGroup OBJECT-GROUP
-    OBJECTS {
-
-        dot1dTpFdbAddress,
-        dot1dTpFdbPort,
-        dot1dTpFdbStatus
-    }
-    STATUS      current
-    DESCRIPTION
-        "Filtering Database information for the Bridge."
-    ::= { dot1dGroups 8 }
-
-dot1dTpGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dTpPort,
-        dot1dTpPortMaxInfo,
-        dot1dTpPortInFrames,
-        dot1dTpPortOutFrames,
-        dot1dTpPortInDiscards
-    }
-    STATUS      current
-    DESCRIPTION
-        "Dynamic Filtering Database information for each port of
-        the Bridge."
-    ::= { dot1dGroups 9 }
-
--- ---------------------------------------------------------- --
--- The Static (Destination-Address Filtering) Database
--- ---------------------------------------------------------- --
-
-dot1dStaticGroup OBJECT-GROUP
-    OBJECTS {
-        dot1dStaticAddress,
-        dot1dStaticReceivePort,
-        dot1dStaticAllowedToGoTo,
-        dot1dStaticStatus
-    }
-    STATUS      current
-    DESCRIPTION
-        "Static Filtering Database information for each port of
-        the Bridge."
-    ::= { dot1dGroups 10 }
-
--- ---------------------------------------------------------- --
--- The Trap Notification Group
--- ---------------------------------------------------------- --
-
-dot1dNotificationGroup NOTIFICATION-GROUP
-    NOTIFICATIONS {
-        newRoot,
-        topologyChange
-    }
-    STATUS      current
-    DESCRIPTION
-        "Group of objects describing notifications (traps)."
-    ::= { dot1dGroups 11 }
-
--- ---------------------------------------------------------- --
--- compliance statements
--- ---------------------------------------------------------- --
-
-bridgeCompliance1493 MODULE-COMPLIANCE
-    STATUS      current
-    DESCRIPTION
-        "The compliance statement for device support of bridging
-        services, as per RFC1493."
-
-    MODULE
-        MANDATORY-GROUPS {
-            dot1dBaseBridgeGroup,
-            dot1dBasePortGroup
-        }
-
-    GROUP   dot1dStpBridgeGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for bridges
-        that support the Spanning Tree Protocol."
-
-    GROUP   dot1dStpPortGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for bridges
-        that support the Spanning Tree Protocol."
-
-    GROUP   dot1dTpBridgeGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for bridges
-        that support the transparent bridging mode.  A
-        transparent or SRT bridge will implement this group."
-
-    GROUP   dot1dTpFdbGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for bridges
-        that support the transparent bridging mode.  A
-        transparent or SRT bridge will implement this group."
-
-    GROUP   dot1dTpGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for bridges
-
-        that support the transparent bridging mode.  A
-        transparent or SRT bridge will implement this group."
-
-    GROUP   dot1dStaticGroup
-    DESCRIPTION
-        "Implementation of this group is optional."
-
-    GROUP dot1dNotificationGroup
-    DESCRIPTION
-        "Implementation of this group is optional."
-    ::= { dot1dCompliances 1 }
-
-bridgeCompliance4188 MODULE-COMPLIANCE
-    STATUS      current
-    DESCRIPTION
-        "The compliance statement for device support of bridging
-        services.  This supports 32-bit Path Cost values and the
-        more restricted bridge and port priorities, as per IEEE
-        802.1t.
-
-        Full support for the 802.1D management objects requires that
-        the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as
-        well as the IF-MIB [RFC2863] objects ifIndex, ifType,
-        ifDescr, ifPhysAddress, and ifLastChange are implemented."
-
-    MODULE
-        MANDATORY-GROUPS {
-            dot1dBaseBridgeGroup,
-            dot1dBasePortGroup
-        }
-
-    GROUP   dot1dStpBridgeGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for
-        bridges that support the Spanning Tree Protocol."
-
-    OBJECT dot1dStpPriority
-    SYNTAX Integer32 (0|4096|8192|12288|16384|20480|24576
-                     |28672|32768|36864|40960|45056|49152
-                     |53248|57344|61440)
-    DESCRIPTION
-        "The possible values defined by IEEE 802.1t."
-
-    GROUP   dot1dStpPortGroup2
-    DESCRIPTION
-        "Implementation of this group is mandatory for
-        bridges that support the Spanning Tree Protocol."
-
-    GROUP   dot1dStpPortGroup3
-    DESCRIPTION
-        "Implementation of this group is mandatory for bridges
-         that support the Spanning Tree Protocol and 32-bit path
-         costs.  In particular, this includes devices supporting
-         IEEE 802.1t and IEEE 802.1w."
-
-    OBJECT dot1dStpPortPriority
-    SYNTAX Integer32 (0|16|32|48|64|80|96|112|128
-                     |144|160|176|192|208|224|240)
-    DESCRIPTION
-        "The possible values defined by IEEE 802.1t."
-
-    GROUP   dot1dTpBridgeGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for
-        bridges that support the transparent bridging
-        mode.  A transparent or SRT bridge will implement
-        this group."
-
-    GROUP   dot1dTpFdbGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for
-        bridges that support the transparent bridging
-        mode.  A transparent or SRT bridge will implement
-        this group."
-
-    GROUP   dot1dTpGroup
-    DESCRIPTION
-        "Implementation of this group is mandatory for
-        bridges that support the transparent bridging
-        mode.  A transparent or SRT bridge will implement
-        this group."
-
-    GROUP   dot1dStaticGroup
-    DESCRIPTION
-        "Implementation of this group is optional."
-
-    GROUP dot1dNotificationGroup
-    DESCRIPTION
-        "Implementation of this group is optional."
-    ::= { dot1dCompliances 2 }
-
-END