snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 0 insertions, 1850 deletions

diff --git a/data/mibs/DISMAN-TRACEROUTE-MIB.txt b/data/mibs/DISMAN-TRACEROUTE-MIB.txt
deleted file mode 100644
index d207b2455..000000000
--- a/data/mibs/DISMAN-TRACEROUTE-MIB.txt
+++ /dev/null
@@ -1,1850 +0,0 @@
-DISMAN-TRACEROUTE-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
-    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
-    Gauge32, Unsigned32, mib-2,
-    NOTIFICATION-TYPE,
-    OBJECT-IDENTITY
-        FROM SNMPv2-SMI                  -- RFC2578
-    RowStatus, StorageType,
-    TruthValue, DateAndTime
-        FROM SNMPv2-TC                   -- RFC2579
-    MODULE-COMPLIANCE, OBJECT-GROUP,
-    NOTIFICATION-GROUP
-        FROM SNMPv2-CONF                 -- RFC2580
-    SnmpAdminString
-        FROM SNMP-FRAMEWORK-MIB          -- RFC3411
-    InterfaceIndexOrZero                 -- RFC2863
-        FROM IF-MIB
-    InetAddressType, InetAddress
-        FROM INET-ADDRESS-MIB            -- RFC4001
-    OperationResponseStatus
-        FROM DISMAN-PING-MIB;            -- RFC4560
-
- traceRouteMIB MODULE-IDENTITY
-    LAST-UPDATED "200606130000Z"         -- 13 June 2006
-    ORGANIZATION "IETF Distributed Management Working Group"
-    CONTACT-INFO
-        "Juergen Quittek
-
-        NEC Europe Ltd.
-        Network Laboratories
-        Kurfuersten-Anlage 36
-        69115 Heidelberg
-        Germany
-
-        Phone: +49 6221 4342-115
-        Email: quittek@netlab.nec.de"
-    DESCRIPTION
-        "The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides
-        access to the traceroute capability at a remote host.
-
-        Copyright (C) The Internet Society (2006). This version of
-        this MIB module is part of RFC 4560; see the RFC itself for
-        full legal notices."
-
-     --  Revision history
-
-     REVISION     "200606130000Z"         -- 13 June 2006
-     DESCRIPTION
-         "Updated version, published as RFC 4560.
-             - Correctly considered IPv6 in DESCRIPTION clause of
-               object traceRouteCtlDataSize
-             - Replaced references to RFC 2575 by RFC 3415
-             - Replaced references to RFC 2571 by RFC 3411
-             - Replaced references to RFC 2851 by RFC 4001
-             - Clarified DESCRIPTION clause of object
-               traceRouteResultsLastGoodPath
-             - Changed range of object traceRouteCtlInitialTtl
-               from (0..255) to (1..255)
-             - Extended DESCRIPTION clause of traceRouteResultsTable
-               describing re-initialization of entries
-             - Changed SYNTAX of traceRouteResultsTestAttempts and
-               traceRouteResultsTestSuccesses from Unsigned32 to
-               Gauge32
-             - Changed status of traceRouteCompliance to deprecated
-             - Added traceRouteFullCompliance and
-               traceRouteMinimumCompliance
-             - Changed status of traceRouteGroup and
-               traceRouteTimeStampGroup to deprecated
-             - Added traceRouteMinimumGroup,
-               traceRouteCtlRowStatusGroup, and
-               traceRouteHistoryGroup
-             - Changed DEFVAL of object
-               traceRouteCtlTargetAddressType from { ipv4 }
-               to { unknown }
-             - Changed DEFVAL of object traceRouteCtlDescr
-               from { '00'H } to { ''H }
-             - Added DEFVAL for object traceRouteCtlTrapGeneration
-               of DEFVAL { { } }"
-     REVISION     "200009210000Z"         -- 21 September 2000
-     DESCRIPTION
-         "Initial version, published as RFC 2925."
-    ::= { mib-2 81 }
-
- -- Top level structure of the MIB
-
- traceRouteNotifications  OBJECT IDENTIFIER ::= { traceRouteMIB 0 }
- traceRouteObjects        OBJECT IDENTIFIER ::= { traceRouteMIB 1 }
- traceRouteConformance    OBJECT IDENTIFIER ::= { traceRouteMIB 2 }
-
- -- The registration node (point) for traceroute implementation types
-
- traceRouteImplementationTypeDomains OBJECT IDENTIFIER
- ::= { traceRouteMIB 3 }
-
- traceRouteUsingUdpProbes OBJECT-IDENTITY
-    STATUS      current
-    DESCRIPTION
-        "Indicates that an implementation is using UDP probes to
-        perform the traceroute operation."
-    ::= { traceRouteImplementationTypeDomains 1 }
-
- -- Simple Object Definitions
-
- traceRouteMaxConcurrentRequests OBJECT-TYPE
-    SYNTAX      Unsigned32
-    UNITS       "requests"
-    MAX-ACCESS  read-write
-    STATUS      current
-    DESCRIPTION
-       "The maximum number of concurrent active traceroute requests
-       that are allowed within an agent implementation.  A value
-       of 0 for this object implies that there is no limit for
-       the number of concurrent active requests in effect.
-
-       The limit applies only to new requests being activated.
-       When a new value is set, the agent will continue processing
-       all the requests already active, even if their number
-       exceeds the limit just imposed."
-    DEFVAL { 10 }
-    ::= { traceRouteObjects 1 }
-
-  -- Traceroute Control Table
-
- traceRouteCtlTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF TraceRouteCtlEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines the Remote Operations Traceroute Control Table for
-        providing the capability of invoking traceroute from a remote
-        host.  The results of traceroute operations can be stored in
-        the traceRouteResultsTable, traceRouteProbeHistoryTable, and
-        the traceRouteHopsTable."
-   ::= { traceRouteObjects 2 }
-
- traceRouteCtlEntry OBJECT-TYPE
-    SYNTAX      TraceRouteCtlEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines an entry in the traceRouteCtlTable.  The first
-        index element, traceRouteCtlOwnerIndex, is of type
-        SnmpAdminString, a textual convention that allows for
-        use of the SNMPv3 View-Based Access Control Model
-        (RFC 3415, VACM) and that allows a management
-        application to identify its entries.  The second index,
-        traceRouteCtlTestName (also an SnmpAdminString),
-        enables the same management application to have
-        multiple requests outstanding."
-    INDEX {
-            traceRouteCtlOwnerIndex,
-            traceRouteCtlTestName
-          }
-    ::= { traceRouteCtlTable 1 }
-
- TraceRouteCtlEntry ::=
-    SEQUENCE {
-      traceRouteCtlOwnerIndex         SnmpAdminString,
-      traceRouteCtlTestName           SnmpAdminString,
-      traceRouteCtlTargetAddressType  InetAddressType,
-      traceRouteCtlTargetAddress      InetAddress,
-      traceRouteCtlByPassRouteTable   TruthValue,
-      traceRouteCtlDataSize           Unsigned32,
-      traceRouteCtlTimeOut            Unsigned32,
-      traceRouteCtlProbesPerHop       Unsigned32,
-      traceRouteCtlPort               Unsigned32,
-      traceRouteCtlMaxTtl             Unsigned32,
-      traceRouteCtlDSField            Unsigned32,
-      traceRouteCtlSourceAddressType  InetAddressType,
-      traceRouteCtlSourceAddress      InetAddress,
-      traceRouteCtlIfIndex            InterfaceIndexOrZero,
-      traceRouteCtlMiscOptions        SnmpAdminString,
-      traceRouteCtlMaxFailures        Unsigned32,
-      traceRouteCtlDontFragment       TruthValue,
-      traceRouteCtlInitialTtl         Unsigned32,
-      traceRouteCtlFrequency          Unsigned32,
-      traceRouteCtlStorageType        StorageType,
-      traceRouteCtlAdminStatus        INTEGER,
-      traceRouteCtlDescr              SnmpAdminString,
-      traceRouteCtlMaxRows            Unsigned32,
-      traceRouteCtlTrapGeneration     BITS,
-      traceRouteCtlCreateHopsEntries  TruthValue,
-      traceRouteCtlType               OBJECT IDENTIFIER,
-      traceRouteCtlRowStatus          RowStatus
-    }
-
- traceRouteCtlOwnerIndex OBJECT-TYPE
-    SYNTAX      SnmpAdminString (SIZE(0..32))
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-       "To facilitate the provisioning of access control by a
-       security administrator using the View-Based Access
-       Control Model (RFC 3415, VACM) for tables in which
-       multiple users may need to create or
-       modify entries independently, the initial index is used as
-       an 'owner index'.  Such an initial index has a syntax of
-       SnmpAdminString and can thus be trivially mapped to a
-       securityName or groupName defined in VACM, in
-       accordance with a security policy.
-
-       When used in conjunction with such a security policy,
-       all entries in the table belonging to a particular user
-       (or group) will have the same value for this initial
-       index.  For a given user's entries in a particular
-       table, the object identifiers for the information in
-       these entries will have the same subidentifiers (except
-       for the 'column' subidentifier) up to the end of the
-       encoded owner index. To configure VACM to permit access
-       to this portion of the table, one would create
-       vacmViewTreeFamilyTable entries with the value of
-       vacmViewTreeFamilySubtree including the owner index
-       portion, and vacmViewTreeFamilyMask 'wildcarding' the
-       column subidentifier.  More elaborate configurations
-       are possible."
-    ::= { traceRouteCtlEntry 1 }
-
-  traceRouteCtlTestName OBJECT-TYPE
-    SYNTAX      SnmpAdminString (SIZE(0..32))
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "The name of a traceroute test.  This is locally unique,
-        within the scope of a traceRouteCtlOwnerIndex."
-    ::= { traceRouteCtlEntry 2 }
-
- traceRouteCtlTargetAddressType OBJECT-TYPE
-    SYNTAX      InetAddressType
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the type of host address to be used on the
-        traceroute request at the remote host."
-    DEFVAL { unknown }
-    ::= { traceRouteCtlEntry 3 }
-
- traceRouteCtlTargetAddress OBJECT-TYPE
-    SYNTAX      InetAddress
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the host address used on the
-        traceroute request at the remote host.  The
-        host address type can be determined by
-        examining the value of the corresponding
-        traceRouteCtlTargetAddressType.
-
-        A value for this object MUST be set prior to
-        transitioning its corresponding traceRouteCtlEntry to
-        active(1) via traceRouteCtlRowStatus."
-    ::= { traceRouteCtlEntry 4 }
-
- traceRouteCtlByPassRouteTable OBJECT-TYPE
-    SYNTAX TruthValue
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-       "The purpose of this object is to enable optional
-       bypassing the route table.  If enabled, the remote
-       host will bypass the normal routing tables and send
-       directly to a host on an attached network.  If the
-       host is not on a directly attached network, an
-       error is returned.  This option can be used to perform
-       the traceroute operation to a local host through an
-       interface that has no route defined (e.g., after the
-       interface was dropped by the routing daemon at the host)."
-    DEFVAL { false }
-    ::= { traceRouteCtlEntry 5 }
-
- traceRouteCtlDataSize OBJECT-TYPE
-    SYNTAX      Unsigned32 (0..65507)
-    UNITS       "octets"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the size of the data portion of a traceroute
-        request, in octets.  If the RECOMMENDED traceroute method
-        (UDP datagrams as probes) is used, then the value
-        contained in this object MUST be applied.  If another
-        traceroute method is used for which the specified size
-        is not appropriate, then the implementation SHOULD use
-        whatever size (appropriate to the method) is closest to
-        the specified size.
-
-        The maximum value for this object was computed by
-        subtracting the smallest possible IP header size of
-        20 octets (IPv4 header with no options) and the UDP
-        header size of 8 octets from the maximum IP packet size.
-        An IP packet has a maximum size of 65535 octets
-        (excluding IPv6 Jumbograms)."
-    DEFVAL { 0 }
-    ::= { traceRouteCtlEntry 6 }
-
- traceRouteCtlTimeOut OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..60)
-    UNITS       "seconds"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the time-out value, in seconds, for
-        a traceroute request."
-    DEFVAL { 3 }
-    ::= { traceRouteCtlEntry 7 }
-
- traceRouteCtlProbesPerHop OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..10)
-    UNITS       "probes"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the number of times to reissue a traceroute
-        request with the same time-to-live (TTL) value."
-    DEFVAL { 3 }
-    ::= { traceRouteCtlEntry 8 }
-
- traceRouteCtlPort OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..65535)
-    UNITS       "UDP Port"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the (initial) UDP port to send the traceroute
-        request to.  A port needs to be specified that is not in
-        use at the destination (target) host.  The default
-        value for this object is the IANA assigned port,
-        33434, for the traceroute function."
-    DEFVAL { 33434 }
-    ::= { traceRouteCtlEntry 9 }
-
- traceRouteCtlMaxTtl OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..255)
-    UNITS       "time-to-live value"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the maximum time-to-live value."
-    DEFVAL { 30 }
-    ::= { traceRouteCtlEntry 10 }
-
- traceRouteCtlDSField OBJECT-TYPE
-    SYNTAX      Unsigned32 (0..255)
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the value to store in the Type of Service
-        (TOS) octet in the IPv4 header or in the Traffic
-        Class octet in the IPv6 header, respectively, of the
-        IP packet used to encapsulate the traceroute probe.
-
-        The octet to be set in the IP header contains the
-        Differentiated Services (DS) Field in the six most
-        significant bits.
-
-        This option can be used to determine what effect an
-        explicit DS Field setting has on a traceroute response.
-        Not all values are legal or meaningful.  A value of 0
-        means that the function represented by this option is
-        not supported.  DS Field usage is often not supported
-        by IP implementations, and not all values are supported.
-        Refer to RFC 2474 and RFC 3260 for guidance on usage of
-        this field."
-    REFERENCE
-        "Refer to RFC 1812 for the definition of the IPv4 TOS
-        octet and to RFC 2460 for the definition of the IPv6
-        Traffic Class octet.  Refer to RFC 2474 and RFC 3260
-        for the definition of the Differentiated Services Field."
-    DEFVAL { 0 }
-    ::= { traceRouteCtlEntry 11 }
-
- traceRouteCtlSourceAddressType OBJECT-TYPE
-    SYNTAX      InetAddressType
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Specifies the type of the source address,
-        traceRouteCtlSourceAddress, to be used at a remote host
-        when a traceroute operation is performed."
-    DEFVAL { unknown }
-    ::= { traceRouteCtlEntry 12 }
-
- traceRouteCtlSourceAddress OBJECT-TYPE
-    SYNTAX      InetAddress
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Use the specified IP address (which must be given as an
-        IP number, not a hostname) as the source address in
-        outgoing probe packets.  On hosts with more than one IP
-        address, this option can be used to select the address
-        to be used.  If the IP address is not one of this
-        machine's interface addresses, an error is returned, and
-        nothing is sent.  A zero-length octet string value for
-        this object disables source address specification.
-        The address type (InetAddressType) that relates to
-        this object is specified by the corresponding value
-        of traceRouteCtlSourceAddressType."
-    DEFVAL { ''H }
-    ::= { traceRouteCtlEntry 13 }
-
- traceRouteCtlIfIndex OBJECT-TYPE
-    SYNTAX      InterfaceIndexOrZero
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Setting this object to an interface's ifIndex prior
-        to starting a remote traceroute operation directs
-        the traceroute probes to be transmitted over the
-        specified interface.  A value of zero for this object
-        implies that this option is not enabled."
-    DEFVAL { 0 }
-    ::= { traceRouteCtlEntry 14 }
-
- traceRouteCtlMiscOptions OBJECT-TYPE
-    SYNTAX      SnmpAdminString
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Enables an application to specify implementation-dependent
-        options."
-    DEFVAL { ''H }
-    ::= { traceRouteCtlEntry 15 }
-
- traceRouteCtlMaxFailures OBJECT-TYPE
-    SYNTAX      Unsigned32 (0..255)
-    UNITS       "timeouts"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The value of this object indicates the maximum number
-        of consecutive timeouts allowed before a remote traceroute
-        request is terminated.  A value of either 255 (maximum
-        hop count/possible TTL value) or 0 indicates that the
-        function of terminating a remote traceroute request when a
-        specific number of consecutive timeouts are detected is
-        disabled."
-    DEFVAL { 5 }
-    ::= { traceRouteCtlEntry 16 }
-
- traceRouteCtlDontFragment OBJECT-TYPE
-    SYNTAX         TruthValue
-    MAX-ACCESS     read-create
-    STATUS         current
-    DESCRIPTION
-        "This object enables setting of the don't fragment flag (DF)
-        in the IP header for a probe.  Use of this object enables
-        a manual PATH MTU test is performed."
-    DEFVAL  { false }
-    ::= { traceRouteCtlEntry 17 }
-
- traceRouteCtlInitialTtl OBJECT-TYPE
-    SYNTAX         Unsigned32 (1..255)
-    MAX-ACCESS     read-create
-    STATUS         current
-    DESCRIPTION
-        "The value of this object specifies the initial TTL value to
-        use.  This enables bypassing the initial (often well known)
-        portion of a path."
-    DEFVAL { 1 }
-    ::= { traceRouteCtlEntry 18 }
-
- traceRouteCtlFrequency  OBJECT-TYPE
-    SYNTAX      Unsigned32
-    UNITS       "seconds"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The number of seconds to wait before repeating a
-        traceroute test, as defined by the value of the
-        various objects in the corresponding row.
-
-        After a single test is completed the number of seconds
-        as defined by the value of traceRouteCtlFrequency MUST
-        elapse before the next traceroute test is started.
-
-        A value of 0 for this object implies that the test
-        as defined by the corresponding entry will not be
-
-        repeated."
-    DEFVAL { 0 }
-    ::= { traceRouteCtlEntry 19 }
-
- traceRouteCtlStorageType OBJECT-TYPE
-    SYNTAX      StorageType
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The storage type for this conceptual row.
-        Conceptual rows having the value 'permanent' need not
-        allow write-access to any columnar objects in the row."
-    DEFVAL { nonVolatile }
-    ::= { traceRouteCtlEntry 20 }
-
- traceRouteCtlAdminStatus OBJECT-TYPE
-    SYNTAX      INTEGER {
-
-                          enabled(1), -- operation should be started
-                          disabled(2) -- operation should be stopped
-                        }
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "Reflects the desired state that an traceRouteCtlEntry
-        should be in:
-
-           enabled(1)  - Attempt to activate the test as defined by
-                         this traceRouteCtlEntry.
-           disabled(2) - Deactivate the test as defined by this
-                         traceRouteCtlEntry.
-
-        Refer to the corresponding traceRouteResultsOperStatus to
-        determine the operational state of the test defined by
-        this entry."
-     DEFVAL { disabled }
-    ::= { traceRouteCtlEntry 21 }
-
- traceRouteCtlDescr OBJECT-TYPE
-    SYNTAX      SnmpAdminString
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The purpose of this object is to provide a
-        descriptive name of the remote traceroute
-        test."
-    DEFVAL { ''H }
-    ::= { traceRouteCtlEntry 22 }
-
- traceRouteCtlMaxRows OBJECT-TYPE
-    SYNTAX      Unsigned32
-    UNITS       "rows"
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The maximum number of corresponding entries allowed
-        in the traceRouteProbeHistoryTable.  An implementation
-        of this MIB will remove the oldest corresponding entry
-        in the traceRouteProbeHistoryTable to allow the
-        addition of an new entry once the number of
-        corresponding rows in the traceRouteProbeHistoryTable
-        reaches this value.
-
-        Old entries are not removed when a new test is
-        started.  Entries are added to the
-        traceRouteProbeHistoryTable until traceRouteCtlMaxRows
-        is reached before entries begin to be removed.
-        A value of 0 for this object disables creation of
-        traceRouteProbeHistoryTable entries."
-    DEFVAL      { 50 }
-    ::= { traceRouteCtlEntry 23 }
-
- traceRouteCtlTrapGeneration OBJECT-TYPE
-    SYNTAX      BITS {
-                  pathChange(0),
-                  testFailure(1),
-                  testCompletion(2)
-                }
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The value of this object determines when and whether to
-        generate a notification for this entry:
-
-        pathChange(0)     - Generate a traceRoutePathChange
-            notification when the current path varies from a
-            previously determined path.
-        testFailure(1)    - Generate a traceRouteTestFailed
-            notification when the full path to a target
-            can't be determined.
-        testCompletion(2) - Generate a traceRouteTestCompleted
-            notification when the path to a target has been
-            determined.
-
-        The value of this object defaults to an empty set,
-        indicating that none of the above options has been
-        selected."
-    DEFVAL { { } }
-    ::= { traceRouteCtlEntry 24 }
-
- traceRouteCtlCreateHopsEntries OBJECT-TYPE
-    SYNTAX      TruthValue
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The current path for a traceroute test is kept in the
-        traceRouteHopsTable on a per-hop basis when the value of
-        this object is true(1)."
-    DEFVAL { false }
-    ::= { traceRouteCtlEntry 25 }
-
- traceRouteCtlType OBJECT-TYPE
-    SYNTAX      OBJECT IDENTIFIER
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "The value of this object is used either to report or to
-        select the implementation method to be used for
-        performing a traceroute operation.  The value of this
-        object may be selected from
-        traceRouteImplementationTypeDomains.
-
-        Additional implementation types should be allocated as
-        required by implementers of the DISMAN-TRACEROUTE-MIB
-        under their enterprise specific registration point,
-        not beneath traceRouteImplementationTypeDomains."
-    DEFVAL { traceRouteUsingUdpProbes }
-    ::= { traceRouteCtlEntry 26 }
-
- traceRouteCtlRowStatus OBJECT-TYPE
-    SYNTAX      RowStatus
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-        "This object allows entries to be created and deleted
-        in the traceRouteCtlTable.  Deletion of an entry in
-        this table results in a deletion of all corresponding (same
-        traceRouteCtlOwnerIndex and traceRouteCtlTestName
-        index values) traceRouteResultsTable,
-        traceRouteProbeHistoryTable, and traceRouteHopsTable
-        entries.
-
-        A value MUST be specified for traceRouteCtlTargetAddress
-        prior to acceptance of a transition to active(1) state.
-
-        When a value for pingCtlTargetAddress is set,
-        the value of object pingCtlRowStatus changes
-        from notReady(3) to notInService(2).
-
-        Activation of a remote traceroute operation is
-        controlled via traceRouteCtlAdminStatus, and not
-        by transitioning of this object's value to active(1).
-
-        Transitions in and out of active(1) state are not
-        allowed while an entry's traceRouteResultsOperStatus
-        is active(1), with the exception that deletion of
-        an entry in this table by setting its RowStatus
-        object to destroy(6) will stop an active
-        traceroute operation.
-
-        The operational state of an traceroute operation
-        can be determined by examination of the corresponding
-        traceRouteResultsOperStatus object."
-    REFERENCE
-        "See definition of RowStatus in RFC 2579, 'Textual
-        Conventions for SMIv2.'"
-    ::= { traceRouteCtlEntry 27 }
-
- -- Traceroute Results Table
-
- traceRouteResultsTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF TraceRouteResultsEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines the Remote Operations Traceroute Results Table for
-        keeping track of the status of a traceRouteCtlEntry.
-
-        An entry is added to the traceRouteResultsTable when an
-        traceRouteCtlEntry is started by successful transition
-        of its traceRouteCtlAdminStatus object to enabled(1).
-
-        If the object traceRouteCtlAdminStatus already has the value
-        enabled(1), and if the corresponding
-        traceRouteResultsOperStatus object has the value
-        completed(3), then successfully writing enabled(1) to the
-        object traceRouteCtlAdminStatus re-initializes the already
-        existing entry in the traceRouteResultsTable.  The values of
-        objects in the re-initialized entry are the same as
-        the values of objects in a new entry would be.
-
-        An entry is removed from the traceRouteResultsTable when
-
-        its corresponding traceRouteCtlEntry is deleted."
-   ::= { traceRouteObjects 3 }
-
- traceRouteResultsEntry OBJECT-TYPE
-    SYNTAX      TraceRouteResultsEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines an entry in the traceRouteResultsTable.  The
-        traceRouteResultsTable has the same indexing as the
-        traceRouteCtlTable so that a traceRouteResultsEntry
-        corresponds to the traceRouteCtlEntry that caused it to
-        be created."
-    INDEX {
-            traceRouteCtlOwnerIndex,
-            traceRouteCtlTestName
-          }
-    ::= { traceRouteResultsTable 1 }
-
- TraceRouteResultsEntry ::=
-    SEQUENCE {
-      traceRouteResultsOperStatus       INTEGER,
-      traceRouteResultsCurHopCount      Gauge32,
-      traceRouteResultsCurProbeCount    Gauge32,
-      traceRouteResultsIpTgtAddrType    InetAddressType,
-      traceRouteResultsIpTgtAddr        InetAddress,
-      traceRouteResultsTestAttempts     Gauge32,
-      traceRouteResultsTestSuccesses    Gauge32,
-      traceRouteResultsLastGoodPath     DateAndTime
-    }
-
- traceRouteResultsOperStatus OBJECT-TYPE
-    SYNTAX      INTEGER {
-                          enabled(1),  -- test is in progress
-                          disabled(2), -- test has stopped
-                          completed(3) -- test is completed
-                        }
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Reflects the operational state of an traceRouteCtlEntry:
-
-           enabled(1)   - Test is active.
-           disabled(2)  - Test has stopped.
-           completed(3) - Test is completed."
-    ::= { traceRouteResultsEntry 1 }
-
- traceRouteResultsCurHopCount OBJECT-TYPE
-    SYNTAX      Gauge32
-    UNITS       "hops"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Reflects the current TTL value (from 1 to
-        255) for a remote traceroute operation.
-        Maximum TTL value is determined by
-        traceRouteCtlMaxTtl."
-    ::= { traceRouteResultsEntry 2 }
-
- traceRouteResultsCurProbeCount OBJECT-TYPE
-    SYNTAX      Gauge32
-    UNITS       "probes"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Reflects the current probe count (1..10) for
-        a remote traceroute operation.  The maximum
-        probe count is determined by
-        traceRouteCtlProbesPerHop."
-    ::= { traceRouteResultsEntry 3 }
-
- traceRouteResultsIpTgtAddrType OBJECT-TYPE
-    SYNTAX      InetAddressType
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This object indicates the type of address stored
-        in the corresponding traceRouteResultsIpTgtAddr
-        object."
-    ::= { traceRouteResultsEntry 4 }
-
- traceRouteResultsIpTgtAddr OBJECT-TYPE
-    SYNTAX      InetAddress
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This object reports the IP address associated
-        with a traceRouteCtlTargetAddress value when the
-        destination address is specified as a DNS name.
-        The value of this object should be a zero-length
-        octet string when a DNS name is not specified or
-        when a specified DNS name fails to resolve."
-    ::= { traceRouteResultsEntry 5 }
-
- traceRouteResultsTestAttempts OBJECT-TYPE
-    SYNTAX      Gauge32
-    UNITS       "tests"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The current number of attempts to determine a path
-        to a target.  The value of this object MUST be started
-        at 0."
-    ::= { traceRouteResultsEntry 6 }
-
- traceRouteResultsTestSuccesses OBJECT-TYPE
-    SYNTAX      Gauge32
-    UNITS       "tests"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The current number of attempts to determine a path
-        to a target that have succeeded.  The value of this
-        object MUST be reported as 0 when no attempts have
-        succeeded."
-    ::= { traceRouteResultsEntry 7 }
-
- traceRouteResultsLastGoodPath OBJECT-TYPE
-    SYNTAX      DateAndTime
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The date and time when the last complete path
-        was determined.  A path is complete if responses
-        were received or timeout occurred for each hop on
-        the path; i.e., for each TTL value from the value
-        of the corresponding traceRouteCtlInitialTtl object
-        up to the end of the path or (if no reply from the
-        target IP address was received) up to the value of
-        the corresponding traceRouteCtlMaxTtl object."
-    ::= { traceRouteResultsEntry 8 }
-
- -- Trace Route Probe History Table
-
- traceRouteProbeHistoryTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF TraceRouteProbeHistoryEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines the Remote Operations Traceroute Results Table
-        for storing the results of a traceroute operation.
-
-        An implementation of this MIB will remove the oldest
-
-        entry in the traceRouteProbeHistoryTable of the
-        corresponding entry in the traceRouteCtlTable to allow
-        the addition of a new entry once the number of rows in
-        the traceRouteProbeHistoryTable reaches the value specified
-        by traceRouteCtlMaxRows for the corresponding entry in the
-        traceRouteCtlTable."
-   ::= { traceRouteObjects 4 }
-
- traceRouteProbeHistoryEntry OBJECT-TYPE
-    SYNTAX      TraceRouteProbeHistoryEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines a table for storing the results of a traceroute
-        operation.  Entries in this table are limited by
-        the value of the corresponding traceRouteCtlMaxRows
-        object.
-
-        The first two index elements identify the
-        traceRouteCtlEntry that a traceRouteProbeHistoryEntry
-        belongs to.  The third index element selects a single
-        traceroute operation result.  The fourth and fifth indexes
-        select the hop and the probe for a particular
-        traceroute operation."
-    INDEX {
-             traceRouteCtlOwnerIndex,
-             traceRouteCtlTestName,
-             traceRouteProbeHistoryIndex,
-             traceRouteProbeHistoryHopIndex,
-             traceRouteProbeHistoryProbeIndex
-
-          }
-    ::= { traceRouteProbeHistoryTable 1 }
-
- TraceRouteProbeHistoryEntry ::=
-    SEQUENCE {
-      traceRouteProbeHistoryIndex         Unsigned32,
-      traceRouteProbeHistoryHopIndex      Unsigned32,
-      traceRouteProbeHistoryProbeIndex    Unsigned32,
-      traceRouteProbeHistoryHAddrType     InetAddressType,
-      traceRouteProbeHistoryHAddr         InetAddress,
-      traceRouteProbeHistoryResponse      Unsigned32,
-      traceRouteProbeHistoryStatus        OperationResponseStatus,
-      traceRouteProbeHistoryLastRC        Integer32,
-      traceRouteProbeHistoryTime          DateAndTime
-    }
-
- traceRouteProbeHistoryIndex OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..'ffffffff'h)
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "An entry in this table is created when the result of
-        a traceroute probe is determined.  The initial 2 instance
-        identifier index values identify the traceRouteCtlEntry
-        that a probe result (traceRouteProbeHistoryEntry) belongs
-        to.  An entry is removed from this table when
-        its corresponding traceRouteCtlEntry is deleted.
-
-        An implementation MUST start assigning
-        traceRouteProbeHistoryIndex values at 1 and wrap after
-        exceeding the maximum possible value, as defined by the
-        limit of this object ('ffffffff'h)."
-    ::= { traceRouteProbeHistoryEntry 1 }
-
- traceRouteProbeHistoryHopIndex OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..255)
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-       "Indicates which hop in a traceroute path the probe's
-       results are for.  The value of this object is initially
-       determined by the value of traceRouteCtlInitialTtl."
-    ::= { traceRouteProbeHistoryEntry 2 }
-
- traceRouteProbeHistoryProbeIndex OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..10)
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-       "Indicates the index of a probe for a particular
-       hop in a traceroute path.  The number of probes per
-       hop is determined by the value of the corresponding
-       traceRouteCtlProbesPerHop object."
-    ::= { traceRouteProbeHistoryEntry 3 }
-
- traceRouteProbeHistoryHAddrType OBJECT-TYPE
-    SYNTAX      InetAddressType
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This objects indicates the type of address stored
-        in the corresponding traceRouteProbeHistoryHAddr
-        object."
-    ::= { traceRouteProbeHistoryEntry 4 }
-
- traceRouteProbeHistoryHAddr OBJECT-TYPE
-    SYNTAX      InetAddress
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-       "The address of a hop in a traceroute path.  This object
-       is not allowed to be a DNS name.  The value of the
-       corresponding object, traceRouteProbeHistoryHAddrType,
-       indicates this object's IP address type."
-    ::= { traceRouteProbeHistoryEntry 5 }
-
- traceRouteProbeHistoryResponse OBJECT-TYPE
-    SYNTAX      Unsigned32
-    UNITS       "milliseconds"
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The amount of time measured in milliseconds from when
-        a probe was sent to when its response was received or
-        when it timed out.  The value of this object is reported
-        as 0 when it is not possible to transmit a probe."
-    ::= { traceRouteProbeHistoryEntry 6 }
-
- traceRouteProbeHistoryStatus OBJECT-TYPE
-    SYNTAX      OperationResponseStatus
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The result of a traceroute operation made by a remote
-        host for a particular probe."
-    ::= { traceRouteProbeHistoryEntry 7 }
-
- traceRouteProbeHistoryLastRC OBJECT-TYPE
-    SYNTAX      Integer32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The last implementation-method-specific reply code received.
-
-        Traceroute is usually implemented by transmitting a series of
-        probe packets with increasing time-to-live values.  A probe
-        packet is a UDP datagram encapsulated into an IP packet.
-        Each hop in a path to the target (destination) host rejects
-        the probe packets (probe's TTL too small, ICMP reply) until
-        either the maximum TTL is exceeded or the target host is
-        received."
-    ::= { traceRouteProbeHistoryEntry 8 }
-
- traceRouteProbeHistoryTime OBJECT-TYPE
-    SYNTAX      DateAndTime
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Timestamp for when this probe's results were determined."
-    ::= { traceRouteProbeHistoryEntry 9 }
-
- -- Traceroute Hop Results Table
-
- traceRouteHopsTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF TraceRouteHopsEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines the Remote Operations Traceroute Hop Table for
-        keeping track of the results of traceroute tests on a
-        per-hop basis."
-    ::= { traceRouteObjects 5 }
-
- traceRouteHopsEntry OBJECT-TYPE
-    SYNTAX      TraceRouteHopsEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Defines an entry in the traceRouteHopsTable.
-        The first two index elements identify the
-        traceRouteCtlEntry that a traceRouteHopsEntry
-        belongs to.  The third index element,
-        traceRouteHopsHopIndex, selects a
-        hop in a traceroute path."
-    INDEX {
-            traceRouteCtlOwnerIndex,
-            traceRouteCtlTestName,
-            traceRouteHopsHopIndex
-          }
-    ::= { traceRouteHopsTable 1 }
-
- TraceRouteHopsEntry ::=
-    SEQUENCE {
-        traceRouteHopsHopIndex         Unsigned32,
-        traceRouteHopsIpTgtAddressType InetAddressType,
-        traceRouteHopsIpTgtAddress     InetAddress,
-        traceRouteHopsMinRtt           Unsigned32,
-        traceRouteHopsMaxRtt           Unsigned32,
-        traceRouteHopsAverageRtt       Unsigned32,
-        traceRouteHopsRttSumOfSquares  Unsigned32,
-        traceRouteHopsSentProbes       Unsigned32,
-        traceRouteHopsProbeResponses   Unsigned32,
-        traceRouteHopsLastGoodProbe    DateAndTime
-      }
-
- traceRouteHopsHopIndex OBJECT-TYPE
-    SYNTAX      Unsigned32 (1..'ffffffff'h)
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-        "Specifies the hop index for a traceroute hop.  Values
-        for this object with respect to the same
-        traceRouteCtlOwnerIndex and traceRouteCtlTestName
-        MUST start at 1 and be given increasing values for
-        subsequent hops.  The value of traceRouteHopsHopIndex is not
-        necessarily the number of the hop on the traced path.
-
-        The traceRouteHopsTable keeps the current traceroute
-        path per traceRouteCtlEntry if enabled by
-        setting the corresponding traceRouteCtlCreateHopsEntries
-        to true(1).
-
-        All hops (traceRouteHopsTable entries) in a traceroute
-        path MUST be updated at the same time when a traceroute
-        operation is completed.  Care needs to be applied when a path
-        either changes or can't be determined.  The initial portion
-        of the path, up to the first hop change, MUST retain the
-        same traceRouteHopsHopIndex values.  The remaining portion
-        of the path SHOULD be assigned new traceRouteHopsHopIndex
-        values."
-    ::= { traceRouteHopsEntry 1 }
-
- traceRouteHopsIpTgtAddressType OBJECT-TYPE
-    SYNTAX      InetAddressType
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This object indicates the type of address stored
-        in the corresponding traceRouteHopsIpTgtAddress
-        object."
-    ::= { traceRouteHopsEntry 2 }
-
- traceRouteHopsIpTgtAddress OBJECT-TYPE
-    SYNTAX      InetAddress
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This object reports the IP address associated with
-
-        the hop.  A value for this object should be reported
-        as a numeric IP address, not as a DNS name.
-
-        The address type (InetAddressType) that relates to
-        this object is specified by the corresponding value
-        of pingCtlSourceAddressType."
-    ::= { traceRouteHopsEntry 3 }
-
- traceRouteHopsMinRtt OBJECT-TYPE
-    SYNTAX      Unsigned32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The minimum traceroute round-trip-time (RTT) received for
-        this hop.  A value of 0 for this object implies that no
-        RTT has been received."
-    ::= { traceRouteHopsEntry 4 }
-
- traceRouteHopsMaxRtt OBJECT-TYPE
-    SYNTAX      Unsigned32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The maximum traceroute round-trip-time (RTT) received for
-        this hop.  A value of 0 for this object implies that no
-        RTT has been received."
-    ::= { traceRouteHopsEntry 5 }
-
- traceRouteHopsAverageRtt OBJECT-TYPE
-    SYNTAX      Unsigned32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The current average traceroute round-trip-time (RTT) for
-        this hop."
-    ::= { traceRouteHopsEntry 6 }
-
- traceRouteHopsRttSumOfSquares OBJECT-TYPE
-    SYNTAX      Unsigned32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "This object contains the sum of the squares of all
-        round-trip-times received for this hop.  Its purpose is
-        to enable standard deviation calculation."
-    ::= { traceRouteHopsEntry 7 }
-
- traceRouteHopsSentProbes OBJECT-TYPE
-    SYNTAX      Unsigned32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "The value of this object reflects the number of probes sent
-        for this hop during this traceroute test.  The value of this
-        object should start at 0."
-    ::= { traceRouteHopsEntry 8 }
-
- traceRouteHopsProbeResponses OBJECT-TYPE
-    SYNTAX      Unsigned32
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Number of responses received for this hop during this
-        traceroute test.  This value of this object should start
-        at 0."
-    ::= { traceRouteHopsEntry 9 }
-
- traceRouteHopsLastGoodProbe OBJECT-TYPE
-    SYNTAX      DateAndTime
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-        "Date and time at which the last response was received for a
-         probe for this hop during this traceroute test."
-    ::= { traceRouteHopsEntry 10 }
-
- -- Notification Definition section
-
- traceRoutePathChange NOTIFICATION-TYPE
-      OBJECTS {
-        traceRouteCtlTargetAddressType,
-        traceRouteCtlTargetAddress,
-        traceRouteResultsIpTgtAddrType,
-        traceRouteResultsIpTgtAddr
-      }
-      STATUS  current
-      DESCRIPTION
-          "The path to a target has changed."
-      ::= { traceRouteNotifications 1 }
-
- traceRouteTestFailed NOTIFICATION-TYPE
-      OBJECTS {
-        traceRouteCtlTargetAddressType,
-        traceRouteCtlTargetAddress,
-        traceRouteResultsIpTgtAddrType,
-        traceRouteResultsIpTgtAddr
-
-      }
-      STATUS  current
-      DESCRIPTION
-          "Could not determine the path to a target."
-      ::= { traceRouteNotifications 2 }
-
- traceRouteTestCompleted NOTIFICATION-TYPE
-      OBJECTS {
-        traceRouteCtlTargetAddressType,
-        traceRouteCtlTargetAddress,
-        traceRouteResultsIpTgtAddrType,
-        traceRouteResultsIpTgtAddr
-      }
-      STATUS  current
-      DESCRIPTION
-          "The path to a target has just been determined."
-      ::= { traceRouteNotifications 3 }
-
- -- Conformance information
- -- Compliance statements
-
- traceRouteCompliances OBJECT IDENTIFIER
-      ::= { traceRouteConformance 1 }
- traceRouteGroups      OBJECT IDENTIFIER
-      ::= { traceRouteConformance 2 }
-
- -- Compliance statements
-
- traceRouteFullCompliance MODULE-COMPLIANCE
-    STATUS  current
-    DESCRIPTION
-            "The compliance statement for SNMP entities that
-            fully implement the DISMAN-TRACEROUTE-MIB."
-    MODULE  -- this module
-        MANDATORY-GROUPS {
-                            traceRouteMinimumGroup,
-                            traceRouteCtlRowStatusGroup,
-                            traceRouteHistoryGroup
-                         }
-
-        GROUP traceRouteHopsTableGroup
-        DESCRIPTION
-            "This group lists the objects that make up a
-            traceRouteHopsEntry.  Support of the traceRouteHopsTable
-            is optional."
-
-        GROUP traceRouteNotificationsGroup
-        DESCRIPTION
-            "This group defines a collection of optional
-            notifications."
-
-        OBJECT traceRouteMaxConcurrentRequests
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "The agent is not required to support SET
-            operations to this object."
-
-        OBJECT traceRouteCtlByPassRouteTable
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access to this object is not required by
-            implementations that are not capable of its
-            implementation.  The function represented by this
-            object is implementable if the setsockopt
-            SOL_SOCKET SO_DONTROUTE option is supported."
-
-        OBJECT traceRouteCtlDSField
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlSourceAddressType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access to this object is not required by
-            implementations that are not capable of binding the
-            send socket with a source address.  An implementation
-            is only required to support IPv4 and IPv6 addresses."
-
-        OBJECT traceRouteCtlSourceAddress
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access to this object is not required by
-            implementations that are not capable of binding the
-            send socket with a source address.  An implementation
-            is only required to support IPv4 and IPv6 addresses."
-
-        OBJECT traceRouteCtlIfIndex
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlMiscOptions
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Support of this object is optional.  If not
-            supporting, do not allow write access and return a
-            zero-length octet string as the value of the object."
-
-        OBJECT traceRouteCtlStorageType
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  It is also allowed
-            that implementations support only the volatile(2)
-            StorageType enumeration."
-
-        OBJECT traceRouteCtlType
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  In addition, the only
-            value that is RECOMMENDED to be supported by an
-            implementation is traceRouteUsingUdpProbes."
-
-        OBJECT traceRouteResultsIpTgtAddrType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteResultsIpTgtAddr
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteResultsLastGoodPath
-        DESCRIPTION
-            "If the traceRouteHopsTableGroup is implemented, then
-            this object is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects.  It is RECOMMENDED
-            that when this object is not supported its values
-            be reported as '0000000000000000'H."
-
-        OBJECT traceRouteProbeHistoryHAddrType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteProbeHistoryHAddr
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteProbeHistoryTime
-        DESCRIPTION
-            "This object is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects.  It is RECOMMENDED
-            that when this object is not supported its values
-            be reported as '0000000000000000'H."
-
-        OBJECT traceRouteHopsIpTgtAddressType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteHopsIpTgtAddress
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteHopsLastGoodProbe
-        DESCRIPTION
-            "This object is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects.  It is RECOMMENDED
-            that when this object is not supported its values
-            be reported as '0000000000000000'H."
-    ::= { traceRouteCompliances 2 }
-
- traceRouteMinimumCompliance MODULE-COMPLIANCE
-    STATUS  current
-    DESCRIPTION
-            "The minimum compliance statement for SNMP entities
-            which implement the minimal subset of the
-            DISMAN-TRACEROUTE-MIB.  Implementors might choose this
-            subset for small devices with limited resources."
-    MODULE  -- this module
-
-        MANDATORY-GROUPS { traceRouteMinimumGroup }
-
-        GROUP traceRouteCtlRowStatusGroup
-        DESCRIPTION
-            "A compliant implementation does not have to implement
-            the traceRouteCtlRowStatusGroup."
-
-        GROUP traceRouteHistoryGroup
-        DESCRIPTION
-            "A compliant implementation does not have to implement
-            the traceRouteHistoryGroup."
-
-        GROUP traceRouteHopsTableGroup
-        DESCRIPTION
-            "This group lists the objects that make up a
-            traceRouteHopsEntry.  Support of the traceRouteHopsTable
-            is optional."
-
-        GROUP traceRouteNotificationsGroup
-        DESCRIPTION
-            "This group defines a collection of optional
-            notifications."
-
-        OBJECT traceRouteMaxConcurrentRequests
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "The agent is not required to support SET
-            operations to this object."
-
-        OBJECT traceRouteCtlByPassRouteTable
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a false(2) as the value of this
-            object.  A value of false(2) means that the function
-            represented by this option is not supported."
-
-        OBJECT traceRouteCtlDSField
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlSourceAddressType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access to this object is not required by
-            implementations that are not capable of binding the
-            send socket with a source address.  An implementation
-            is only required to support IPv4 and IPv6 addresses."
-
-        OBJECT traceRouteCtlSourceAddress
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access to this object is not required by
-            implementations that are not capable of binding the
-            send socket with a source address.  An implementation
-            is only required to support IPv4 and IPv6 addresses."
-
-        OBJECT traceRouteCtlIfIndex
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlMiscOptions
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Support of this object is optional.  If not
-            supporting, do not allow write access, and return a
-            zero-length octet string as the value of the object."
-
-        OBJECT traceRouteCtlDontFragment
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a false(2) as the value of this
-            object.  A value of false(2) means that the function
-            represented by this option is not supported."
-
-        OBJECT traceRouteCtlInitialTtl
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a 1 as the value of this object."
-
-        OBJECT traceRouteCtlFrequency
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If write access is
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlStorageType
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  It is also allowed
-            that implementations support only the volatile(2)
-            StorageType enumeration."
-
-        OBJECT traceRouteCtlDescr
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "The agent is not required to support set
-            operations to this object."
-
-        OBJECT traceRouteCtlMaxRows
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If the
-            traceRouteHistoryGroup is not implemented, then write
-            access to this object MUST be disabled, and the object
-            MUST return a value of 0 when retrieved."
-
-        OBJECT traceRouteCtlTrapGeneration
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If the
-            traceRouteNotificationsGroup is not implemented, then
-            write access to this object MUST be disabled, and the
-            object MUST return a value with no bit set when
-            retrieved.  No bit set indicates that no notification
-            is generated."
-
-        OBJECT traceRouteCtlCreateHopsEntries
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  If the
-            traceRouteHopsTableGroup is not implemented, then
-            write access to this object MUST be disabled, and the
-            object MUST return a value of false(2) when retrieved."
-
-        OBJECT traceRouteCtlType
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  In addition, the only
-
-            value that is RECOMMENDED to be supported by an
-            implementation is traceRouteUsingUdpProbes."
-
-        OBJECT traceRouteResultsIpTgtAddrType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteResultsIpTgtAddr
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteResultsLastGoodPath
-        DESCRIPTION
-            "This object is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects.  It is RECOMMENDED
-            that when this object is not supported its values
-            be reported as '0000000000000000'H."
-
-        OBJECT traceRouteProbeHistoryHAddrType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteProbeHistoryHAddr
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteProbeHistoryTime
-        DESCRIPTION
-            "If the traceRouteHistoryGroup is implemented, then
-            this object is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects.  It is RECOMMENDED
-            that when this object is not supported its values
-            be reported as '0000000000000000'H."
-
-        OBJECT traceRouteHopsIpTgtAddressType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteHopsIpTgtAddress
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteHopsLastGoodProbe
-        DESCRIPTION
-            "If the traceRouteHopsTableGroup is implemented, then
-            this object is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects.  It is RECOMMENDED
-            that when this object is not supported its values
-            be reported as '0000000000000000'H."
-    ::= { traceRouteCompliances 3 }
-
- traceRouteCompliance MODULE-COMPLIANCE
-    STATUS  deprecated
-    DESCRIPTION
-            "The compliance statement for the DISMAN-TRACEROUTE-MIB.
-            This compliance statement has been deprecated because
-            the traceRouteGroup and the traceRouteTimeStampGroup
-            have been split and deprecated. The
-            traceRouteFullCompliance is semantically identical to the
-            deprecated traceRouteCompliance statement."
-    MODULE  -- this module
-        MANDATORY-GROUPS {
-                            traceRouteGroup
-                          }
-        GROUP traceRouteTimeStampGroup
-        DESCRIPTION
-            "This group is mandatory for implementations that have
-            access to a system clock and that are capable of setting
-            the values for DateAndTime objects."
-
-        GROUP traceRouteNotificationsGroup
-        DESCRIPTION
-            "This group defines a collection of optional
-            notifications."
-
-        GROUP traceRouteHopsTableGroup
-        DESCRIPTION
-            "This group lists the objects that make up a
-            traceRouteHopsEntry.  Support of the traceRouteHopsTable
-            is optional."
-
-        OBJECT traceRouteMaxConcurrentRequests
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "The agent is not required to support SET
-            operations to this object."
-
-        OBJECT traceRouteCtlByPassRouteTable
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "This object is not required by implementations that
-            are not capable of its implementation.  The function
-            represented by this object is implementable if the
-            setsockopt SOL_SOCKET SO_DONTROUTE option is
-            supported."
-
-        OBJECT traceRouteCtlSourceAddressType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "This object is not required by implementations that
-            are not capable of binding the send socket with a
-            source address.  An implementation is only required to
-            support IPv4 and IPv6 addresses."
-
-        OBJECT traceRouteCtlSourceAddress
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "This object is not required by implementations that
-            are not capable of binding the send socket with a
-            source address.  An implementation is only required to
-            support IPv4 and globally unique IPv6 addresses."
-
-        OBJECT traceRouteCtlIfIndex
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  When write access is
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlMiscOptions
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Support of this object is optional.  When not
-            supporting, do not allow write access, and return a
-            zero-length octet string as the value of the object."
-
-        OBJECT traceRouteCtlStorageType
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  It is also allowed
-           that implementations support only the volatile
-            StorageType enumeration."
-
-        OBJECT traceRouteCtlDSField
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  When write access is
-            not supported, return a 0 as the value of this object.
-            A value of 0 implies that the function represented by
-            this option is not supported."
-
-        OBJECT traceRouteCtlType
-        MIN-ACCESS  read-only
-        DESCRIPTION
-            "Write access is not required.  In addition, the only
-            value that is RECOMMENDED to be supported by an
-            implementation is traceRouteUsingUdpProbes."
-
-        OBJECT traceRouteResultsIpTgtAddrType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteResultsIpTgtAddr
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteProbeHistoryHAddrType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteProbeHistoryHAddr
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteHopsIpTgtAddressType
-        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-
-        OBJECT traceRouteHopsIpTgtAddress
-        SYNTAX  InetAddress (SIZE(0|4|16))
-        DESCRIPTION
-            "An implementation should only support IPv4 and
-            globally unique IPv6 address values for this object."
-    ::= { traceRouteCompliances 1 }
-
- -- MIB groupings
-
- traceRouteMinimumGroup OBJECT-GROUP
-   OBJECTS {
-             traceRouteMaxConcurrentRequests,
-             traceRouteCtlTargetAddressType,
-             traceRouteCtlTargetAddress,
-             traceRouteCtlByPassRouteTable,
-             traceRouteCtlDataSize,
-             traceRouteCtlTimeOut,
-             traceRouteCtlProbesPerHop,
-             traceRouteCtlPort,
-             traceRouteCtlMaxTtl,
-             traceRouteCtlDSField,
-             traceRouteCtlSourceAddressType,
-             traceRouteCtlSourceAddress,
-             traceRouteCtlIfIndex,
-             traceRouteCtlMiscOptions,
-             traceRouteCtlMaxFailures,
-             traceRouteCtlDontFragment,
-             traceRouteCtlInitialTtl,
-             traceRouteCtlFrequency,
-             traceRouteCtlStorageType,
-             traceRouteCtlAdminStatus,
-             traceRouteCtlMaxRows,
-             traceRouteCtlTrapGeneration,
-             traceRouteCtlDescr,
-             traceRouteCtlCreateHopsEntries,
-             traceRouteCtlType,
-             traceRouteResultsOperStatus,
-             traceRouteResultsCurHopCount,
-             traceRouteResultsCurProbeCount,
-             traceRouteResultsIpTgtAddrType,
-             traceRouteResultsIpTgtAddr,
-             traceRouteResultsTestAttempts,
-             traceRouteResultsTestSuccesses,
-             traceRouteResultsLastGoodPath
-
-          }
-   STATUS  current
-   DESCRIPTION
-       "The group of objects that constitute the remote traceroute
-       operation."
-   ::= { traceRouteGroups 5 }
-
- traceRouteCtlRowStatusGroup OBJECT-GROUP
-   OBJECTS {
-             traceRouteCtlRowStatus
-          }
-   STATUS  current
-   DESCRIPTION
-       "The RowStatus object of the traceRouteCtlTable."
-   ::= { traceRouteGroups 6 }
-
- traceRouteHistoryGroup OBJECT-GROUP
-   OBJECTS {
-             traceRouteProbeHistoryHAddrType,
-             traceRouteProbeHistoryHAddr,
-             traceRouteProbeHistoryResponse,
-             traceRouteProbeHistoryStatus,
-             traceRouteProbeHistoryLastRC,
-             traceRouteProbeHistoryTime
-           }
-   STATUS  current
-   DESCRIPTION
-       "The group of objects that constitute the history
-       capability."
-    ::= { traceRouteGroups 7 }
-
- traceRouteNotificationsGroup NOTIFICATION-GROUP
-   NOTIFICATIONS {
-             traceRoutePathChange,
-             traceRouteTestFailed,
-             traceRouteTestCompleted
-          }
-   STATUS   current
-   DESCRIPTION
-       "The notifications that are required to be supported by
-       implementations of this MIB."
-   ::= { traceRouteGroups 3 }
-
- traceRouteHopsTableGroup OBJECT-GROUP
-   OBJECTS {
-             traceRouteHopsIpTgtAddressType,
-             traceRouteHopsIpTgtAddress,
-             traceRouteHopsMinRtt,
-             traceRouteHopsMaxRtt,
-             traceRouteHopsAverageRtt,
-             traceRouteHopsRttSumOfSquares,
-             traceRouteHopsSentProbes,
-             traceRouteHopsProbeResponses,
-             traceRouteHopsLastGoodProbe
-           }
-    STATUS   current
-    DESCRIPTION
-        "The group of objects that constitute the
-        traceRouteHopsTable."
-  ::= { traceRouteGroups 4 }
-
- traceRouteGroup OBJECT-GROUP
-   OBJECTS {
-             traceRouteMaxConcurrentRequests,
-             traceRouteCtlTargetAddressType,
-             traceRouteCtlTargetAddress,
-             traceRouteCtlByPassRouteTable,
-             traceRouteCtlDataSize,
-             traceRouteCtlTimeOut,
-             traceRouteCtlProbesPerHop,
-             traceRouteCtlPort,
-             traceRouteCtlMaxTtl,
-             traceRouteCtlDSField,
-             traceRouteCtlSourceAddressType,
-             traceRouteCtlSourceAddress,
-             traceRouteCtlIfIndex,
-             traceRouteCtlMiscOptions,
-             traceRouteCtlMaxFailures,
-             traceRouteCtlDontFragment,
-             traceRouteCtlInitialTtl,
-             traceRouteCtlFrequency,
-             traceRouteCtlStorageType,
-             traceRouteCtlAdminStatus,
-             traceRouteCtlMaxRows,
-             traceRouteCtlTrapGeneration,
-             traceRouteCtlDescr,
-             traceRouteCtlCreateHopsEntries,
-             traceRouteCtlType,
-             traceRouteCtlRowStatus,
-             traceRouteResultsOperStatus,
-             traceRouteResultsCurHopCount,
-             traceRouteResultsCurProbeCount,
-             traceRouteResultsIpTgtAddrType,
-             traceRouteResultsIpTgtAddr,
-             traceRouteResultsTestAttempts,
-             traceRouteResultsTestSuccesses,
-             traceRouteProbeHistoryHAddrType,
-             traceRouteProbeHistoryHAddr,
-             traceRouteProbeHistoryResponse,
-             traceRouteProbeHistoryStatus,
-             traceRouteProbeHistoryLastRC
-          }
-   STATUS  deprecated
-   DESCRIPTION
-       "The group of objects that constitute the remote traceroute
-       operation."
-   ::= { traceRouteGroups 1 }
-
- traceRouteTimeStampGroup OBJECT-GROUP
-   OBJECTS {
-             traceRouteResultsLastGoodPath,
-             traceRouteProbeHistoryTime
-           }
-   STATUS  deprecated
-   DESCRIPTION
-       "The group of DateAndTime objects."
-    ::= { traceRouteGroups 2 }
-
-END