snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 0 insertions, 149 deletions

diff --git a/data/mibs/IF-INVERTED-STACK-MIB.txt b/data/mibs/IF-INVERTED-STACK-MIB.txt
deleted file mode 100644
index eb8797b58..000000000
--- a/data/mibs/IF-INVERTED-STACK-MIB.txt
+++ /dev/null
@@ -1,149 +0,0 @@
-IF-INVERTED-STACK-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
-  MODULE-IDENTITY, OBJECT-TYPE, mib-2      FROM SNMPv2-SMI
-  RowStatus                                FROM SNMPv2-TC
-  MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
-  ifStackGroup2,
-  ifStackHigherLayer, ifStackLowerLayer    FROM IF-MIB;
-
-ifInvertedStackMIB MODULE-IDENTITY
-  LAST-UPDATED "200006140000Z"
-  ORGANIZATION "IETF Interfaces MIB Working Group"
-  CONTACT-INFO
-          "   Keith McCloghrie
-              Cisco Systems, Inc.
-              170 West Tasman Drive
-              San Jose, CA  95134-1706
-              US
-
-              408-526-5260
-              kzm@cisco.com"
-  DESCRIPTION
-          "The MIB module which provides the Inverted Stack Table for
-          interface sub-layers."
-  REVISION      "200006140000Z"
-  DESCRIPTION
-          "Initial revision, published as RFC 2864"
-  ::= { mib-2 77 }
-
-ifInvMIBObjects OBJECT IDENTIFIER ::= { ifInvertedStackMIB 1 }
-
---
---           The Inverted Interface Stack Group
---
-
-ifInvStackTable  OBJECT-TYPE
-   SYNTAX        SEQUENCE OF IfInvStackEntry
-   MAX-ACCESS    not-accessible
-   STATUS        current
-   DESCRIPTION
-          "A table containing information on the relationships between
-
-          the multiple sub-layers of network interfaces.  In
-          particular, it contains information on which sub-layers run
-          'underneath' which other sub-layers, where each sub-layer
-          corresponds to a conceptual row in the ifTable.  For
-          example, when the sub-layer with ifIndex value x runs
-          underneath the sub-layer with ifIndex value y, then this
-          table contains:
-
-            ifInvStackStatus.x.y=active
-
-          For each ifIndex value, z, which identifies an active
-          interface, there are always at least two instantiated rows
-          in this table associated with z.  For one of these rows, z
-          is the value of ifStackHigherLayer; for the other, z is the
-          value of ifStackLowerLayer.  (If z is not involved in
-          multiplexing, then these are the only two rows associated
-          with z.)
-
-          For example, two rows exist even for an interface which has
-          no others stacked on top or below it:
-
-            ifInvStackStatus.z.0=active
-            ifInvStackStatus.0.z=active
-
-          This table contains exactly the same number of rows as the
-          ifStackTable, but the rows appear in a different order."
-   REFERENCE
-          "ifStackTable of RFC 2863"
-   ::= { ifInvMIBObjects 1 }
-
-ifInvStackEntry  OBJECT-TYPE
-   SYNTAX        IfInvStackEntry
-   MAX-ACCESS    not-accessible
-   STATUS        current
-   DESCRIPTION
-          "Information on a particular relationship between two sub-
-          layers, specifying that one sub-layer runs underneath the
-          other sub-layer.  Each sub-layer corresponds to a conceptual
-          row in the ifTable."
-   INDEX { ifStackLowerLayer, ifStackHigherLayer }
-   ::= { ifInvStackTable 1 }
-
-IfInvStackEntry ::=
-  SEQUENCE {
-      ifInvStackStatus       RowStatus
-   }
-
-ifInvStackStatus  OBJECT-TYPE
-  SYNTAX         RowStatus
-  MAX-ACCESS     read-only
-  STATUS         current
-  DESCRIPTION
-          "The status of the relationship between two sub-layers.
-
-          An instance of this object exists for each instance of the
-          ifStackStatus object, and vice versa.  For example, if the
-          variable ifStackStatus.H.L exists, then the variable
-          ifInvStackStatus.L.H must also exist, and vice versa.  In
-          addition, the two variables always have the same value.
-
-          However, unlike ifStackStatus, the ifInvStackStatus object
-          is NOT write-able.  A network management application wishing
-          to change a relationship between sub-layers H and L cannot
-          do so by modifying the value of ifInvStackStatus.L.H, but
-          must instead modify the value of ifStackStatus.H.L.  After
-          the ifStackTable is modified, the change will be reflected
-          in this table."
-  ::= { ifInvStackEntry 1 }
-
--- conformance information
-
-ifInvConformance OBJECT IDENTIFIER ::= { ifInvMIBObjects 2 }
-
-ifInvGroups      OBJECT IDENTIFIER ::= { ifInvConformance 1 }
-ifInvCompliances OBJECT IDENTIFIER ::= { ifInvConformance 2 }
-
--- compliance statements
-
-ifInvCompliance MODULE-COMPLIANCE
-  STATUS  current
-  DESCRIPTION
-          "The compliance statement for SNMP entities which provide
-          inverted information on the layering of network interfaces."
-
-  MODULE  -- this module
-      MANDATORY-GROUPS { ifInvStackGroup }
-
-      OBJECT       ifInvStackStatus
-      SYNTAX       INTEGER { active(1) }
-      DESCRIPTION
-          "Support is only required for 'active'."
-
-  MODULE  IF-MIB
-      MANDATORY-GROUPS { ifStackGroup2 }
-  ::= { ifInvCompliances 1 }
-
--- units of conformance
-
-ifInvStackGroup    OBJECT-GROUP
-  OBJECTS { ifInvStackStatus }
-  STATUS  current
-  DESCRIPTION
-          "A collection of objects providing inverted information on
-          the layering of MIB-II interfaces."
-  ::= { ifInvGroups 1 }
-
-END