snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 0 insertions, 443 deletions

diff --git a/data/mibs/OSPF-TRAP-MIB.txt b/data/mibs/OSPF-TRAP-MIB.txt
deleted file mode 100644
index 8a3ab990c..000000000
--- a/data/mibs/OSPF-TRAP-MIB.txt
+++ /dev/null
@@ -1,443 +0,0 @@
-OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
-
-    IMPORTS
-            MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
-                FROM SNMPv2-SMI
-            MODULE-COMPLIANCE, OBJECT-GROUP
-                FROM SNMPv2-CONF
-            ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
-            ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
-            ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
-            ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
-            ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
-            ospfExtLsdbLimit, ospf
-                FROM OSPF-MIB;
-
-    ospfTrap MODULE-IDENTITY
-           LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-           ORGANIZATION "IETF OSPF Working Group"
-           CONTACT-INFO
-           "                      Fred Baker
-           Postal:                Cisco Systems
-                                  519 Lado Drive
-                                  Santa Barbara, California 93111
-           Tel:                   +1 805 681 0115
-           E-Mail:                fred@cisco.com
-
-                                  Rob Coltun
-           Postal:                RainbowBridge Communications
-           Tel:                   (301) 340-9416
-           E-Mail:                rcoltun@rainbow-bridge.com"
-       DESCRIPTION
-          "The MIB module to describe traps for  the  OSPF
-          Version 2 Protocol."
-      ::= { ospf 16 }
-
--- Trap Support Objects
-
---         The following are support objects for the OSPF traps.
-
-ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
-ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
-
-    ospfSetTrap OBJECT-TYPE
-        SYNTAX   OCTET STRING (SIZE(4))
-        MAX-ACCESS   read-write
-        STATUS   current
-        DESCRIPTION
-           "A four-octet string serving as a bit  map  for
-           the trap events defined by the OSPF traps. This
-           object is used to enable and  disable  specific
-           OSPF   traps   where  a  1  in  the  bit  field
-           represents enabled.  The right-most bit  (least
-           significant) represents trap 0."
-       ::= { ospfTrapControl 1 }
-
-
-    ospfConfigErrorType OBJECT-TYPE
-        SYNTAX   INTEGER   {
-                    badVersion (1),
-                    areaMismatch (2),
-                    unknownNbmaNbr (3), -- Router is Dr eligible
-                    unknownVirtualNbr (4),
-                    authTypeMismatch(5),
-                    authFailure (6),
-                    netMaskMismatch (7),
-                    helloIntervalMismatch (8),
-                    deadIntervalMismatch (9),
-                    optionMismatch (10) }
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "Potential types  of  configuration  conflicts.
-           Used  by the ospfConfigError and ospfConfigVir-
-           tError traps."
-   ::= { ospfTrapControl 2 }
-
-
-    ospfPacketType OBJECT-TYPE
-        SYNTAX   INTEGER   {
-                    hello (1),
-                    dbDescript (2),
-                    lsReq (3),
-                    lsUpdate (4),
-                    lsAck (5) }
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "OSPF packet types."
-   ::= { ospfTrapControl 3 }
-
-
-    ospfPacketSrc OBJECT-TYPE
-        SYNTAX   IpAddress
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The IP address of an inbound packet that  can-
-           not be identified by a neighbor instance."
-       ::= { ospfTrapControl 4 }
-
-
--- Traps
-
-
-    ospfIfStateChange NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfIfIpAddress,
-                    ospfAddressLessIf,
-                    ospfIfState   -- The new state
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfIfStateChange trap signifies that there
-           has been a change in the state of a non-virtual
-           OSPF interface. This trap should  be  generated
-           when  the interface state regresses (e.g., goes
-           from Dr to Down) or progresses  to  a  terminal
-           state  (i.e.,  Point-to-Point, DR Other, Dr, or
-           Backup)."
-   ::= { ospfTraps 16 }
-
-
-    ospfVirtIfStateChange NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfVirtIfAreaId,
-                    ospfVirtIfNeighbor,
-                    ospfVirtIfState  -- The new state
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfIfStateChange trap signifies that there
-           has  been a change in the state of an OSPF vir-
-           tual interface.
-           This trap should be generated when  the  inter-
-           face  state  regresses  (e.g., goes from Point-
-           to-Point to Down) or progresses to  a  terminal
-           state (i.e., Point-to-Point)."
-   ::= { ospfTraps 1 }
-
-
-    ospfNbrStateChange NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfNbrIpAddr,
-                    ospfNbrAddressLessIndex,
-                    ospfNbrRtrId,
-                    ospfNbrState  -- The new state
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An  ospfNbrStateChange  trap  signifies   that
-           there  has been a change in the state of a non-
-           virtual OSPF neighbor.   This  trap  should  be
-           generated  when  the  neighbor  state regresses
-           (e.g., goes from Attempt or Full  to  1-Way  or
-           Down)  or progresses to a terminal state (e.g.,
-           2-Way or Full).  When an  neighbor  transitions
-           from  or  to Full on non-broadcast multi-access
-           and broadcast networks, the trap should be gen-
-           erated  by the designated router.  A designated
-           router transitioning to Down will be  noted  by
-           ospfIfStateChange."
-   ::= { ospfTraps 2 }
-
-
-    ospfVirtNbrStateChange NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfVirtNbrArea,
-                    ospfVirtNbrRtrId,
-                    ospfVirtNbrState  -- The new state
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfIfStateChange trap signifies that there
-           has  been a change in the state of an OSPF vir-
-           tual neighbor.  This trap should  be  generated
-           when  the  neighbor state regresses (e.g., goes
-           from Attempt or  Full  to  1-Way  or  Down)  or
-           progresses to a terminal state (e.g., Full)."
-   ::= { ospfTraps 3 }
-    ospfIfConfigError NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfIfIpAddress,
-                    ospfAddressLessIf,
-                    ospfPacketSrc,  -- The source IP address
-                    ospfConfigErrorType, -- Type of error
-                    ospfPacketType
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfIfConfigError  trap  signifies  that  a
-           packet  has  been received on a non-virtual in-
-           terface  from  a  router  whose   configuration
-           parameters  conflict  with this router's confi-
-           guration parameters.  Note that the  event  op-
-           tionMismatch  should  cause  a  trap only if it
-           prevents an adjacency from forming."
-                  ::= { ospfTraps 4 }
-
-
-    ospfVirtIfConfigError NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfVirtIfAreaId,
-                    ospfVirtIfNeighbor,
-                    ospfConfigErrorType, -- Type of error
-                    ospfPacketType
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfConfigError trap signifies that a pack-
-           et  has  been  received  on a virtual interface
-           from a router  whose  configuration  parameters
-           conflict   with   this  router's  configuration
-           parameters.  Note that the event optionMismatch
-           should  cause a trap only if it prevents an ad-
-           jacency from forming."
-   ::= { ospfTraps 5 }
-
-
-    ospfIfAuthFailure NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfIfIpAddress,
-                    ospfAddressLessIf,
-                    ospfPacketSrc,  -- The source IP address
-                    ospfConfigErrorType, -- authTypeMismatch or
-                                         -- authFailure
-                    ospfPacketType
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfIfAuthFailure  trap  signifies  that  a
-           packet  has  been received on a non-virtual in-
-           terface from a router whose authentication  key
-           or  authentication  type  conflicts  with  this
-           router's authentication key  or  authentication
-           type."
-   ::= { ospfTraps 6 }
-
-
-    ospfVirtIfAuthFailure NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfVirtIfAreaId,
-                    ospfVirtIfNeighbor,
-                    ospfConfigErrorType, -- authTypeMismatch or
-                                         -- authFailure
-                    ospfPacketType
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfVirtIfAuthFailure trap signifies that a
-           packet has been received on a virtual interface
-           from a router whose authentication key  or  au-
-           thentication  type conflicts with this router's
-           authentication key or authentication type."
-   ::= { ospfTraps 7 }
-
-
-    ospfIfRxBadPacket NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfIfIpAddress,
-                    ospfAddressLessIf,
-                    ospfPacketSrc,  -- The source IP address
-                    ospfPacketType
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfIfRxBadPacket trap  signifies  that  an
-           OSPF  packet has been received on a non-virtual
-           interface that cannot be parsed."
-   ::= { ospfTraps 8 }
-
-    ospfVirtIfRxBadPacket NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfVirtIfAreaId,
-                    ospfVirtIfNeighbor,
-                    ospfPacketType
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfRxBadPacket trap signifies that an OSPF
-           packet has been received on a virtual interface
-           that cannot be parsed."
-   ::= { ospfTraps 9 }
-
-
-    ospfTxRetransmit NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfIfIpAddress,
-                    ospfAddressLessIf,
-                    ospfNbrRtrId, -- Destination
-                    ospfPacketType,
-                    ospfLsdbType,
-                    ospfLsdbLsid,
-                    ospfLsdbRouterId
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfTxRetransmit  trap  signifies  than  an
-           OSPF  packet  has  been retransmitted on a non-
-           virtual interface.  All packets that may be re-
-           transmitted  are associated with an LSDB entry.
-           The LS type, LS ID, and Router ID are  used  to
-           identify the LSDB entry."
-   ::= { ospfTraps 10 }
-
-
-    ospfVirtIfTxRetransmit NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfVirtIfAreaId,
-                    ospfVirtIfNeighbor,
-                    ospfPacketType,
-                    ospfLsdbType,
-                    ospfLsdbLsid,
-                    ospfLsdbRouterId
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfTxRetransmit  trap  signifies  than  an
-           OSPF packet has been retransmitted on a virtual
-           interface.  All packets that may be retransmit-
-           ted  are  associated with an LSDB entry. The LS
-           type, LS ID, and Router ID are used to identify
-           the LSDB entry."
-   ::= { ospfTraps 11 }
-
-
-    ospfOriginateLsa NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
-                    ospfLsdbType,
-                    ospfLsdbLsid,
-                    ospfLsdbRouterId
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfOriginateLsa trap signifies that a  new
-           LSA  has  been originated by this router.  This
-           trap should not be invoked for simple refreshes
-           of  LSAs  (which happesn every 30 minutes), but
-           instead will only be invoked  when  an  LSA  is
-           (re)originated due to a topology change.  Addi-
-           tionally, this trap does not include LSAs  that
-           are  being  flushed  because  they have reached
-           MaxAge."
-   ::= { ospfTraps 12 }
-
-
-    ospfMaxAgeLsa NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
-                    ospfLsdbType,
-                    ospfLsdbLsid,
-                    ospfLsdbRouterId
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfMaxAgeLsa trap signifies  that  one  of
-           the LSA in the router's link-state database has
-           aged to MaxAge."
-   ::= { ospfTraps 13 }
-
-
-    ospfLsdbOverflow NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfExtLsdbLimit
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfLsdbOverflow trap  signifies  that  the
-           number of LSAs in the router's link-state data-
-           base has exceeded ospfExtLsdbLimit."
-   ::= { ospfTraps 14 }
-
-
-    ospfLsdbApproachingOverflow NOTIFICATION-TYPE
-        OBJECTS {
-                    ospfRouterId, -- The originator of the trap
-                    ospfExtLsdbLimit
-                  }
-        STATUS             current
-        DESCRIPTION
-           "An ospfLsdbApproachingOverflow trap  signifies
-           that  the  number of LSAs in the router's link-
-           state database has exceeded ninety  percent  of
-           ospfExtLsdbLimit."
-   ::= { ospfTraps 15 }
-
-
--- conformance information
-
-ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
-
-ospfTrapGroups      OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
-ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
-
--- compliance statements
-
-    ospfTrapCompliance MODULE-COMPLIANCE
-        STATUS  current
-        DESCRIPTION
-           "The compliance statement "
-       MODULE  -- this module
-       MANDATORY-GROUPS { ospfTrapControlGroup }
-
-
-        GROUP       ospfTrapControlGroup
-        DESCRIPTION
-           "This group is optional but recommended for all
-           OSPF systems"
-       ::= { ospfTrapCompliances 1 }
-
-
--- units of conformance
-
-    ospfTrapControlGroup    OBJECT-GROUP
-        OBJECTS {
-                           ospfSetTrap,
-                           ospfConfigErrorType,
-                           ospfPacketType,
-                           ospfPacketSrc
-        }
-        STATUS  current
-        DESCRIPTION
-           "These objects are required  to  control  traps
-           from OSPF systems."
-       ::= { ospfTrapGroups 1 }
-
-
-END