ethernet: T4353: fix Jinja2 linting errors

1 files changed, 0 insertions, 72 deletions

diff --git a/data/templates/ethernet/wpa_supplicant.conf.tmpl b/data/templates/ethernet/wpa_supplicant.conf.tmpl
deleted file mode 100644
index 74f0999c1..000000000
--- a/data/templates/ethernet/wpa_supplicant.conf.tmpl
+++ /dev/null
@@ -1,72 +0,0 @@
-### Autogenerated by interfaces-ethernet.py ###
-
-# see full documentation:
-# https://w1.fi/cgit/hostap/plain/wpa_supplicant/wpa_supplicant.conf
-
-# For UNIX domain sockets (default on Linux and BSD): This is a directory that
-# will be created for UNIX domain sockets for listening to requests from
-# external programs (CLI/GUI, etc.) for status information and configuration.
-# The socket file will be named based on the interface name, so multiple
-# wpa_supplicant processes can be run at the same time if more than one
-# interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-ctrl_interface=/run/wpa_supplicant
-
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-# Note: When using MACsec, eapol_version shall be set to 3, which is
-# defined in IEEE Std 802.1X-2010.
-eapol_version=2
-
-# No need to scan for access points in EAPoL mode
-ap_scan=0
-
-# EAP fast re-authentication
-fast_reauth=1
-
-network={
-{%  if eapol is vyos_defined %}
-{%    if eapol.ca_certificate is vyos_defined %}
-    ca_cert="/run/wpa_supplicant/{{ ifname }}_ca.pem"
-{%    endif %}
-    client_cert="/run/wpa_supplicant/{{ ifname }}_cert.pem"
-    private_key="/run/wpa_supplicant/{{ ifname }}_cert.key"
-{%  endif %}
-
-    # list of accepted authenticated key management protocols
-    key_mgmt=IEEE8021X
-    eap=TLS
-
-{% if mac is vyos_defined %}
-    identity="{{ mac }}"
-{% else %}
-    identity="{{ hw_id }}"
-{% endif %}
-
-    # eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-    # Dynamic WEP key required for non-WPA mode
-    # bit0 (1): require dynamically generated unicast WEP key
-    # bit1 (2): require dynamically generated broadcast WEP key
-    #      (3) = require both keys; default)
-    # Note: When using wired authentication (including MACsec drivers),
-    # eapol_flags must be set to 0 for the authentication to be completed
-    # successfully.
-    eapol_flags=0
-
-    # For wired IEEE 802.1X authentication, "allow_canned_success=1" can be
-    # used to configure a mode that allows EAP-Success (and EAP-Failure) without
-    # going through authentication step. Some switches use such sequence when
-    # forcing the port to be authorized/unauthorized or as a fallback option if
-    # the authentication server is unreachable. By default, wpa_supplicant
-    # discards such frames to protect against potential attacks by rogue
-    # devices, but this option can be used to disable that protection for cases
-    # where the server/authenticator does not need to be authenticated.
-    phase1="allow_canned_success=1"
-}
-